Cities Index.
Agenda Packet

Salinas City Council
December 9, 2025

Document
Agenda Packet
Meeting
December 9, 2025
Body
Salinas City Council
Pages
45
Original file
37.3 MB
Text extracted from the city's file for reading and search. Open the original on salinas.legistar.com. That file is the official record.

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

AGREEMENT FOR SERVICES BETWEEN
THE CITY OF SALINAS AND 786 HASTRUST INC DBA 247 PRIVATE SECURITY

On Call Uniform Security Guard Services

THIS AGREEMENT is executed this 9th day of December, 2025, (“Agreement” or “Contract”) between the City of Salinas , a California Charter city and municipal corpora tion (hereinafter “City”) and 786 Hastrust Inc dba 247 Private Security, a California Stock Corporation (hereinafter “Contractor”).

IT IS HEREBY MUTUALLY AGREED AS FOLLOWS:

1. Scope.

Contractor hereby agrees to provide to the City, as the scope of services under this Agreement, the following services: Uniform Security Guard Services. Scope of work is further discussed in Uniformed Security Guard Services of City’s Request for Proposals (Attachment B, attached hereto and incorporated herein by this reference ) a nd Contractor’s Proposal dated 06/06/2025 (Attachment C, attached hereto and incorporated herein by this reference).

2. Timeliness.

Contractor shall perform all tasks in a timely fashion, as set forth more specifically in Section 3 below. Failure to so perform is hereby deemed a material breach of this Agreement, and City may terminate this Agreement with no further liability hereunder, or the city may agree in writing with Contractor to an extension of time.

3. Term.

This Agreement shall commence on December 1, 2025, and shall terminate on November 30, 2027, unless terminated earlier (the “Initial Term”). This Agreement may be renewed for three (3) optional one (1) year period s (“Renewal Terms”) upon the mutual written consent of the parties. This Agreement may be extended only upon mutual written consent of the parties and may be terminated only pursuant to the terms of this Agreement.

4. Payment.

City agrees to pay and Contractor agrees to accept as full and fair consideration for the performance of this Agreement, compensation in the total amount not to exceed Four Hundred Thousand Dollars ($400,000) annually, as more fully described in title of Contractor ’s fee schedule, Attachment C. Contractor has no right of reimbursement for expenses under this Agreement. Compensation shall become due and payable 30 days after City’s approval of Contractor’s submission of monthly written invoices to the City. The payment of any compensation shall be contingent upon performance of the terms and conditions of this Agreement to the satisfaction of the City. If City determines that the work set forth in the written invoice has not been performed in accordance with the terms of this Agreement, City shall not be responsible for payment until such time as the work has been satisfactorily performed.

5. Meet & Confer.

Contractor agrees to meet and confer with City or its agents or employees with regard to services as set forth herein as may be required by City to insure timely and adequate performance of this Agreement.

6. Insurance.

Contractor shall procure and maintain for the duration of this Agreement insurance meeting the requirements specified in Attachment A hereto.

Page 2 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

7. Indemnification. Contractor shall hold harmless, defend at its own expense, and indemnify City and its officers, officials, employees, agents, and volunteers from and against all liability, claims, damages, losses, and/or expenses including reasonable City attorney fees arising from all acts or omissions of Contractor or its officers, agents, or employees arising out of the performance of the work under this Contract, caused in whole or in part by any negligent act or omission of the Contractor, any subcontractor, anyone directly or indirectly employed by any of them, or anyone for whose acts any of them may be liable, except where caused by the sole negligence or willful misconduct of the City.

8. Licensing.

Contractor warrants that it is properly licensed to perform the work specified under this Agreement, including but not limited to possession of a current City business license.

9. Termination.

City may terminate this Agreement upon ten days’ written notice. The amount of damages, if any, as a result of such termination may be decided by negotiations between the parties or before a court of competent jurisdiction.

10. Agency.

In performing the services specified under this Agreement, Contractor is hereby deemed to be an independent contractor and not an agent or employee of City.

11. Non-A
ssignability. The rights and obligations of Contractor hereunder are not assignable and cannot be delegated without written consent of City.

12. Entire Agreement. This Agreement constitutes the entire Agreement between the p arties
hereto and supersedes any and all prior agreements, whether oral or written, relating to the subject matter thereof. Any modification of the Agreement will be effective only if it is in writing signed by both parties hereto.

13. Validity.

If any provision in this Agreement is held by a court of competent jurisdiction to be invalid, void or unenforceable, the remaining provisions will continue in full force without being impaired or invalidated in any way.

14. Counterparts.

This Agreement may be executed in multiple originals, each of which is deemed to be an original, and may be signed in counterparts.

15. Laws.

Contractor agrees that in the performance of this Agreement it will comply with all applicable State, Federal and local laws and regulations. This Agreement shall be governed by and construed in accordance with the laws of the State of California, County of Monterey, and City of Salinas.

16. Subject to Availability of Funds. In the event that t he City Council, or other governing
body, fails to appropriate or budget sufficient funds for the continuation of this agreement, or should funds become unavailable for any other reason, the City reserves the right to terminate this

Page 3 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

agreement upon written notice. This termination shall be effective as of the last day of the fiscal year for which funds were appropriated. Upon such termination, the Contractor will be limited to compensation for satisfactory services rendered up to the termination date.

17. Levine Act Disclosure Compliance (Cal Government Code Sec. 84308). Contractor hereby affirms and warrants that it has not contributed to the campaign of any elected or appointed City official an amount totaling more than $500 within twelve (12) months of the effective date of this Agreement, except as Contractor has dis closed within its Levine Act Disclosure Form submitted by Contractor to the City. Contractor agrees, that in the event it makes any contributions subject to the Levine Act’s disclosure requirements within twelve (12) months of the effective date of this Agreement, that it will file a Levine Act Disclosure Form (or Forms). Contractor acknowledges this duty of disclosure and that the City has made the Levine Act Disclosure Form(s) readily available on the City’s public internet site under Your Government / Transparency section for Contractor’s continuous compliance.

18. Electronic Execution of Agreement . T
he words “execution,” “signed,” “signature,” and
words of like import in this Agreement and shall be deemed to include electronic signatures or electronic records (including, without limitation, DocuSign and AdobeSign), each of which shall be of the same legal effect, validity, enforceability, and admissibility as a handwritten signature.

I
N WITNESS WHEREOF, this Agreement is entered into by the parties hereto on the day and year first written above.

CITY OF SALINAS

__________________________________
René Mendez, City Manager

APPROVED AS TO FORM:

_________________________________
Christopher A. Callihan, City Attorney, or
Rhonda Combs, Assistant City Attorney

CONTRACTOR

___________________________________

By (Printed Name): ___________________

Its (Title): ___________________________

Page 4 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

Attachment A

Insurance Requirements

Contractor shall procure and maintain for the duration of the contract, and for three years thereafter, insurance against claims for injuries to persons or damages to property which may arise from or in connection with the performance of the work hereunder by the Contractor, his/her/its officers, agents, representatives, employees, and/or subcontractors.

MINIMUM SCOPE AND LIMIT OF INSURANCE
Coverage shall be at least as broad as:

1. Commercial General Liability (“CGL”): Insurance Services Office ( “ISO”) Form CG 00 01 covering CGL on an occurrence basis, including products and completed operations, property damage, bodily injury and personal & advertising injury with limits no less than $2,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO Form CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit.

2. Automobile Liability: ISO Form CA 0001 covering Code 1 (any auto), with limits no less than $1,000,000 per accident for bodily injury and property damage.

3. Workers’ Compensation: as required by the State of California, with Statutory Limits, and Employers’ Liability insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.

4. Contractors’ Pollution Legal Liability and/or Asbestos Legal Liability and/or Errors and Omissions (if project involves environmental hazards) : with limits no less than $1,000,000 per occurrence or claim, and $2,000,000 policy aggregate, on an annual basis.

If the Contractor maintains broader coverage and/or higher limits than the minimums shown above, the Contractor requires and shall be entitled to the broader coverage and/or higher limits maintained by the Contractor. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the City.

Self-Insured Retentions
Self-insured retentions must be declared to and approved by the City. At the option of the City, either: the Contractor shall cause the insurer shall to reduce or eliminate such self -insured retentions as respects the City, its officers, officials, employees, and volunteers; or the Contractor shall provide a financial guarantee satisfactory to the City guaranteeing payment of losses and related investigat ions, claim administration, and defense expenses. The policy language shall provide, or be endorsed to provide, that the self -insured retention may be satisfied by either the named insured or City.

Other Insurance Provisions
The insurance policies are to contain, or be endorsed to contain, the following provisions:

1. The City, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Contractor including materials, parts, or equipment furnished in connection with such work or operations and automobiles owned, leased, hired, or borrowed by or on behalf

Page 5 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

of the Contractor. General liability coverage can be provided in the form of an endorsement to the Contractor’s insurance (at least as broad as ISO Form CG 20 10, CG 11 85 or both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 forms if later revisions used).

2. For any claims related to this project, the Contractor’s insurance coverage shall be primary insurance coverage at least as broad as ISO CG 20 01 04 13 as respects the City, its officers, officials, employees, and volunteers. Any insurance or self -insurance maintained by the City, its officers, officials, employees, or volunteers shall be excess of the Contractor’s insurance and shall not contribute with it.

3. Each insurance policy required by this clause shall provide that coverage shall not be canceled, except with notice to the City.

4. A copy of the claims reporting requirements must be submitted by Contractor to the City.

5. If the services involve lead-based paint or asbestos identification/remediation, the Contractor’s Pollution Liability policy shall not contain lead-based paint or asbestos exclusions. If the services involve mold identification/remediation, the Contractor ’s Pollution Liability policy shall not contain a mold exclusion, and the definition of Pollution shall include microbial matter, including mold.

Acceptability of Insurers
Insurance is to be placed with insurers authorized to conduct business in the state with a current A.M. Best rating of no less than A: VII, unless otherwise acceptable to the City.

Waiver of Subrogation
Contractor hereby agrees to waive rights of subrogation which any insurer of Contractor may acquire from Contractor by virtue of the payment of any loss. Contractor agrees to obtain any endorsement that may be necessary to affect this waiver of subrogation. The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of the City for all work performed by the Contractor, its employees, agents and subcontractors.

Verification of Coverage
Contractor shall furnish the City with original Certificates of Insurance including an additional insured endorsement and all required amendatory endorsements (or copies of the applicable policy language effecting coverage required by this clause) and a copy of the Declarations and Endorsement Page of the CGL policy listing all policy endorsements to City before work begins.

However, failure to obtain the required documents prior to the work beginning shall not waive the Contractor’s obligation to provide them. The City reserves the right to require complete, certified copies of all required insurance policies, including endorsements, required by these specifications, at any time.

Subcontractors
Contractor shall require and verify that all subcontractors maintain insurance meeting all the requirements stated herein, and Contractor shall ensure that City is an additional insured on insurance required from subcontractors. For CGL coverage subcontractors shall provide coverage with a form at least as broad as CG 20 38 04 13.

Maintenance of Insurance
Maintenance of insurance by Contractor as specified shall in no way be interpreted as relieving

Page 6 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

Contractor of its indemnification obligations or any responsibility whatsoever and the Contractor may carry, at its own expense, such additional insurance as it deems necessary.

Special Risks or Circumstances
City reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other special circumstances.

Page 7 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

Attachment B

Request for Proposal – Uniform Security Guard Services

Page 8 of 8 ends

Agreement for Services v. October 2025
786 HASTRUST INC DBA 247 PRIVATE SECURITY
NOVEMBER 2025

Attachment C

Contractor’s Proposal
REQUEST FOR PROPOSALS:

Uniformed Security Guard Services

Proposals are due by 3:00 pm (PST)
on Friday, June 6, 2025
City Hall
Public Works Department
ATTN: Cristina Gonzalez
200 Lincoln Avenue
Salinas, CA 93901

ATTACHMENT B

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 1 of 29

TABLE OF CONTENTS

1. INTRODUCTION ....................................................................................................................................... 2

2. GENERAL INFORMATION...................................................................................................................... 2

3. PROPOSER’S MINIMUM REQUIREMENTS .......................................................................................... 3

4. PROPOSAL SCHEDULE ........................................................................................................................... 4

5. CONTRACT TERM ................................................................................................................................... 4

6. EVALUATION AND SELECTION CRITERIA ........................................................................................ 4

7. SCOPE OF WORK ..................................................................................................................................... 5

8. PROPOSAL PACKAGE REQUIREMENTS ............................................................................................. 7

9. PRICING .................................................................................................................................................. 10

10. INQUIRIES .............................................................................................................................................. 10

11. DISCRETION AND LIABILITY WAIVER ........................................................................................... 10

12. PIGGY BACK CLAUSE .......................................................................................................................... 11

13. SAMPLE AGREEMENT ......................................................................................................................... 11

14. COMPENSATION & PAYMENT ........................................................................................................... 11

15. LIST OF FACILITIES .............................................................................................................................. 12 ATTACHMENT 1 – PRICE SCHEDULE ........................................................................................................... 14 ATTACHMENT 2 – SIGNATURE PAGE / VERIFICATION OF LICENSURE .............................................. 15 ATTACHMENT 3 – LOCAL VENDOR DECLARATION FORM ................................................................... 16 APPENDIX A: SAMPLE AGREEMENT ........................................................................................................... 17

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 2 of 29

1. INTRODUCTION
The City of Salinas (hereinafter referred to as the “City”) is requesting Proposals from qualified organizations (hereinafter referred to as “Proposer”) to establish a City- wide Service agreement to provide Unarmed Security Guard Services to various City Departments, the Salinas City Center (SCC) and other Salinas non-profit organizations, agencies and offices located throughout the City.

The awarded Contractor (hereinafter referred to as “Contractor”) will be expected to enter into an agreement for Professional Services (refer to Appendix A). Prior to submitting a proposal, Proposers are advised to carefully read the instructions below including the sample Professional Service Agreement and any solicitation attachments/exhibits. The Term is expected to be for two (2) years with three (3) one-year renewal options.

This solicitation is not intended to create an exclusive service agreement. City retains the ability, at its sole discretion, to select multiple Contractors and add qualified contractors after the signing of the agreement.

The full content of this RFP is available through the City’s PlanetBids Vendor Portal. Proposers can register as a “Prospective Bidder” in one of two ways:
• For FREE through PlanetBids Vendor Portal for the City of Salinas at https://www.planetbids.com/portal/portal.cfm?CompanyID=22949 • Directly via Planet Bids’ website for a FEE at https://vendorline.com/register and sign up for City of Salinas’ bid opportunities.

For assistance in downloading the documents, contact Planet Bids online or by calling 818-992-1771.

Written responses to timely inquiries will be posted on the Q/A tab of the City’s PlanetBids portal no later than 3:00pm, PST, Wednesday, May 28, 2025. Any interpretation of, or correction to, this RFP will be made only by addendum issued via PlanetBids. It is the responsibility of each Proposer to periodically check vendor portal to ensure that it has received and reviewed any and all addendas to this solicitation. The City will not be responsible for any other explanations, corrections to, or interpretations of the documents, including any oral information.

2. GENERAL INFORMATION
The City of Salinas is located on the Central Coast of California, approximately 106 miles south of San Francisco. Named for a nearby salt marsh, Salinas became the seat of Monterey County in 1872 and was incorporated in 1874. As the largest City in Monterey County, the City of Salinas boasts a population 156,600 persons. The City is approximately 23.22 square miles. Salinas and the Salinas Valley offer a unique combination of climate, natural resources and people. The Salinas Valley is known as "The Salad Bowl of the World" for its high- quality production of lettuce, broccoli, mushrooms and strawberries, along with numerous other crops and related service industries.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 3 of 29

HOMELESS POPULATION
The homeless population within the City of Salinas continues to be a concern to the citizens in the City and the County, local governments, and private property and business owners. Many issues and concerns concentrate around frequent trespassing, littering and loitering. Current Security Guard Services and the Salinas Police Department respond to homeless disturbances involving mental illness and or other disabilities including substance abuse. It is the expectation of the Contractor(s) to have a tested protocol for responding to calls for service that are respectful and sensitive to the rights of all people including those who appear to be or are homeless, and also the laws of the City as they may apply to public intoxication, loitering, sleeping or camping in the public -right-of-way. The selected security firms will have established communication links with the City police, County behavioral health, not-for profit service organizations and others supporting resources to help and support a security staff person's effort to de -escalate and assist a person with no home to live in, displaying erratic or unpredictable behavior in the public, and know how to best address situations that arise as a result of unsocial behavior.

SALINAS CITY CENTER IMPROVEMENT ASSOCIATION
In 2015, downtown property owners voted to form an improvement district and assess their properties.

Early in 2016, the property owners formed a 501(c)3 public benefit corporation called Salinas City Center Improvement Association (SCCIA). SCCIA is now up and running, with a district manager and a full slate of volunteer committees working hard to implement the vision for a vibrant downtown. The Salinas City Center is made up of 130 property owners (which includes the City and County) that own 217 properties within the District.

The Contractor shall have experience in similar types of services. All Proposers responding to this Request for Proposal (RFP) will be evaluated based the expertise, prior experience on similar projects, demonstrated competence, ability to meet the requested services, adequate staffing, reference check, understanding of services, cost and responsiveness to the needs and concerns of the City of Salinas.

3. PROPOSER’S MINIMUM REQUIREMENTS
Interested and qualified Proposers that can demonstrate their ability to successfully provide the required services outlined in Section 7 – Scope of Work and Section 15 – List of Facilities , of this RFP are invited to submit a proposal, provided they meet the following requirements. If these requirements are not met, the proposal may not receive further consideration, as determined in the sole discretion of the City.
• The Proposer must have 5 years’ experience, within the last 10 years, and demonstrate a comprehensive understanding and practice of the needs of the City, or provide evidence of services equivalent or similar to the services identified in Section 7 – Scope of Work and Section 15 – List of Facilities, and indicate success rate of such services, with data that indicates the cost versus benefit of hiring this company

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 4 of 29

• The Proposer must have a Project Manager/Designated Point of Contact assigned to the Contract, with prior experience working with a similar municipality. • The Proposer must have appropriate certificates/professional accreditations for the state of California to provide requested services, and provide a full spectrum of services offered by the proposer, as well as the organizational structure/chart, company history, company philosophy, overview of services, company strengths, major customers and services provided as requested in Section 7 – Scope of Work and Section 15 – List of Facilities.

4. PROPOSAL SCHEDULE
The following schedule has been established for this RFP. The City of Salinas reserves the right to modify this schedule if it is in its best interest to do so. Notice of changes shall be posted on Planet Bids via an Addendum to this RFP.

TASK DATE
ISSUE RFP May 16, 2025

DEADLINE FOR WRITTEN

QUESTIONS
3pm, PST, Wednesday May 28, 2025
ANSWERS TO Q&A Friday, May 30, 2025

PROPOSAL SUBMITTAL

DEADLINE
3pm, PST Friday, June 6, 2025
NOTIFICATION OF SELECTION Friday June 13, 2025
CITY COUNCIL AWARD Tuesday July 1, 2025
Dates are subject to change.

5. CONTRACT TERM
The term of the Agreement(s) shall be for a period of two (2) years with the option to extend the agreement for three (3) optional one (1) year periods. City is not required to state a reason if it elects not to renew. Both parties shall agree upon rate extension(s) or changes in writing.

The Agreement shall contain a clause that provides that City reserves the right to cancel the Agreement, or any extension, without cause, with a thirty day (30) written notice, or immediately with cause.

6. EVALUATION AND SELECTION CRITERIA
The City will review all submitted proposals in accordance with the established evaluation criteria.

Following the initial evaluation, the City may conduct interviews with the highest-ranked Proposers, if deemed necessary. The City reserves the right to award the contract not solely based on cost, but to the Proposer(s) whose proposal offers the best overall value, aligns most closely with the service specifications, and best serves the City’s interests. All Proposers will be notified in writing or by email regarding the outcome of the selection process and their status.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 5 of 29

Proposals will be evaluated based on the following criteria:

35% Demonstrated capacity to fulfill scope of work
20% Established Behavioral Health Protocol and Experience 20% Pricing
15% Qualifications and Experience of Entity and Key Personnel 10% References

Local Purchasing Preference: In accordance with Section 12 -28.040 of the Salinas Municipal Code, contractors that qualify as a local business enterprise shall receive a credit of five percent of the total points. If applicable, Proposers should fill out and submit Declaration of Local Business Enterprise form (refer to Attachment 3).

The City will adhere to the following procedures in evaluating proposals. An Evaluation/Selection Committee (Committee), which may include members of the City's staff and possibly one or more outside experts, will screen and review all proposals according to the weighted criteria set forth above.

While price is one basic factor for award, it is not the sole consideration.

Recommendation for award is contingent upon the successful negotiation of final contract terms.

Negotiations shall be confidential and not subject to disclosure to competing Proposers unless an agreement is reached. If contract negotiations cannot be concluded successfully within a time period determined by the City, the City may terminate negotiations and commence negotiations with the next highest scoring Proposer or withdraw the RFP.

7. SCOPE OF WORK

SECURITY GUARD GENERAL SERVICES
The scope of work includes, but is not limited to the following:

1. Guards shall perform foot, bike, vehicle1 patrols of City facilities unless otherwise arranged.

2. Guards shall observe and report accidents, emergencies, property issues, or potential threats to City Staff immediately and have the ability to contact the Salinas Police Department as the situation warrants.

3. Guards shall observe and report any damage to property or suspicious activity to City Staff or designated representatives.

4. Guards are required to perform an annual site assessment report.

5. Guards shall provide fire watch as needed.

6. Guards shall respond to all activated panic and specific code alarms at each location.

7. Each Facility will develop a comprehensive set of Patrol Orders to be followed by the Guards.

1 Mileage driven by patrol vehicle per month may vary depending on the site.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 6 of 29

HOURS
Contractor shall define overtime pay start time and end time. Contractor shall provide rates for differentials swing shift and graveyard.

CONTRACTOR REQUIREMENTS

1. Contractor(s) shall provide City departments, which are contracting for services, with the following:
• Training programs for staff on an annual basis;
• Site assessment reports annually;
• Daily updated activity/incident log reports to the requesting department’s designated contact.

2. Services shall be provided in accordance with sections 11105, 12002, and 12033 of the California Penal Code and Sections 7583.5 and 7583.12 of the California Business and Professions Code.

3. Contractor(s) security guards shall be capable of performing duties independently, receiving general operational direction, and should not require ongoing supervision by the City.

4. Contractor will be responsible for providing its Guards with any equipment necessary to complete their assigned duties, including personal protective equipment (PPE).

5. Contractors are responsible for planning for the required Rest and Meal periods.

6. Contractor(s) security guards providing services under this Agreement are subject to federal and state laws, regulations, and rules pertaining to the confidentiality of information contained in department files and automated records. Contractor(s) employees will receive training about confidentiality and any conflicts of interest matters, the training will be conducted by the City.

7. Breach of confidentiality and/or conflict of interest laws, regulations, or rules by an assigned security guard shall be grounds for replacement of that guard, who may also face possible civil and/or criminal action.

8. City has the right to decline the services of a security guard at any time without cause and, Contractor(s) shall replace the guard in question within two (2) hours of receiving an oral request from the City.

9. City agrees to provide a follow up written record stating the cause leading to the refusal of the security guard service within fifteen (15) days from the time of an incident.

10. Contractor(s) agree(s) that the replacement guard shall complete the unfinished assignment shift of the original assigned guard at no additional cost to the City.

11. As requested by City, Contractor(s) shall require its key security guards and management staff to attend security and safety related meetings conducted by City at no additional cost to the City.

12. Contractor(s) agrees to provide the City with a primary contact person for the general administration of this Agreement.

13. The primary contact person should be available by phone to respond to service request calls made by the City on a 24/7, 365 days per year basis.

14. Contractor(s) shall ensure that security guards present a neat & business- like appearance.

15. The security guards must conduct themselves with courteous professionalism at all times.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 7 of 29

16. If any license, permit, or approval is necessary from any agency whatsoever for the service or work to be performed pursuant to the terms and conditions of this Agreement, Contractor(s )will obtain such approvals at its own expense prior to commencement of said work or service under this Agreement.

17. Upon receiving Notice of Award, Contractor(s) shall provide the City with a list of security guards who will be assigned to provide services.

18. For each security guard listed, Contractor(s) shall provide the following information:
• Security guard’s full name;
• Security guard’s date of birth;
• CA State Bureau of Security Guard license number;
• Security guard’s home address, both current address and addresses from the previous three (3) years.

19. Contractor(s) shall update the City list of security guards as personnel changes are made.

8. PROPOSAL PACKAGE REQUIREMENTS
Proposal should include the information as requested and as applicable to the requested services. The proposal package shall be organized as per the table below; headings and section numbering used in the proposal package shall be the same as those identified in the table. Proposal packages shall include at a minimum, but not limited to, the following information in the format indicated:

Section 1 Cover Letter (including contact info)
Signature Page – Refer to Attachment 2
Receipt of Signed Addenda (if any)
Section 2 Pre-Qualification / Licensing Requirements
Section 3 Project Experience and References
Section 4 Statement to Service Entire City
Section 5 Statement to Service Salinas City Center District Section 6 Pricing Schedule – Refer to Attachment 1
Section 7 Appendix

Section 1.

Cover Letter: All proposals must be accompanied by a cover letter not exceeding one page and should provide firm information and contact information as follows:

Contact Info: The name, address, telephone number, and fax number of Contractor’s primary contact person during the solicitation process through potential contract award.

Firm Info: Description of the type of organization (e.g. corporation, partnership, including joint venture teams and subcontractors) and how many years it has been in existence.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 8 of 29

Signed Signature Page/Verification of Licensure and Signed Addenda (if any addenda were released for this solicitation): Proposal packages submitted without the signed Signature Page/Verification of Licensure ( Attachment 2 ) will be deemed non -responsive. All signatures must be manual and in BLUE ink. All prices and notations must be typed or written in BLUE ink. Errors may be crossed out and corrections printed in ink or typed adjacent and must be initialed in BLUE ink by the person signing the proposal.

Section 2.

Pre-Qualifications/Licensing: Contractor must acknowledge in writing that it meets all of the pre - qualifications and licensing requirements as set forth in Section 3 of this RFP.

Section 3.

Key Staff Persons: Proposer shall identify key staff and their qualifications and experience proposed for the service identified herein.

Experience and Reference: Contractor shall describe at least three (3) similar projects for which it provided services similar to the scope of work described herein. Please include phone number and email address if possible as the City will conduct reference checks using this information.

Violations: Contractor shall submit copies of all notices of violations, corrective action notices, enforcement actions or orders, warning notices, writings, or other forms of permit violation/non- compliance documentation (such as OSHA) received by Contractor, or any business organization owned or operated by the Contractor which are its parent company and/or subsidiaries, from any public agency during 2015 up to and including the present day.

Section 4.

Statement to Service Entire City: Include a statement acknowledging your company is able to provide services to throughout the City at various facilities including: the Airport, Permit Center, Libraries, Recreational Facilities, Parking Garages, Parking Lots, Train Station, Sherwood Hall, and other City- owned Facilities.

If certain locations are to include added fees for travel time, please indicate as such in this statement.

Section 5.

Statement to Service Salinas City Center and Eligible Non -Profit Groups : Include a statement acknowledging your company is able to provide services to the Salinas City Center District (Downtown District) and other eligible non -profit groups based in the City of Salinas and that the same terms, conditions, and rates will be extended to those groups.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 9 of 29

Section 6.

Attachment 1 – Pricing Schedule (Attachment 1): this form must be submitted with proposal.

Local Business Declaration (If applicable): If Proposer meets the Local Business requirements as set forth in Salinas Municipal Code Section 12-28.050 and would like to have 5% local preference applied to its proposal, it shall be required to complete and submit the Local Business Declaration Form attached hereto as Attachment 3.

Section 7.

Appendices: Contractor may Include here any additional information that it believes to be applicable to this proposal package.

Additional Requirements
To be considered “responsive,” submitted proposal packages shall adhere to the following:

 Original proposal shall be submitted in response to this solicitation. Shall include a cover indicating the company name submitting, and reference to “RFP Citywide Service Agreements to Provide Uniformed Security Guard Services”.
 Proposal packages shall be prepared on 8-1/2” x 11” paper, preferably duplex printed bound with front and back covers. Fold out charts, tables, spreadsheets, brochures, pamphlets, and other pertinent information or work product examples may be included as Appendices.  Reproductions of the City of Salinas Seal shall not be used in any documents submitted in response to this solicitation.
 Contractor shall not use white -out or a similar correction product to make late changes to their proposal package but may instead line out and initial in BLUE ink any item which no longer is applicable or accurate.
 To validate your proposal package, submit the Signature Page/Verification of Licensure (contained herein as Attachment 2) with your proposal. Proposal packages submitted without that page will be deemed non -responsive. Proposal signature must be manual, in BLUE ink, and included with the original copy of the proposal. Photocopies of the Signature Page may be inserted into the remaining proposal copies. All prices and notations must be typed or written in BLUE ink in the original proposal copy as well. Errors may be crossed out and corrections printed in BLUE ink or typed adjacent, and must be initialed in BLUE ink by the person signing the proposal.  CONFIDENTIAL OR PROPRIETARY CONTENT: Any page of the proposal package that is deemed by Proposer to be a trade secret by the Proposer shall be clearly marked “CONFIDENTIAL INFORMATION” or “PROPRIETARY INFORMATION” at the top of the page.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 10 of 29

9. PRICING
Proposer(s) will attach and submit a completed Attachment 1- Price Schedule for the provision of services as outlined within this RFP.

Prices stated in Attachment 1- Price Schedule shall be effective from the date the proposal is submitted to the day the contract agreement is awarded and through the initial term of the agreement.

Prior to the start of each project, the City department and Contractor(s) will mutually agree upon the budget for the project. City will provide a defined scope. Pricing may be based upon an hourly rate or by the project, based upon the direction of the user department. Prices quoted for work assignments must remain in effect for a minimum of thirty (30) days.

Invoices submitted for payment will clearly itemize but is not limited to the following:
• the City Department receiving services;
• the purchase order number under which the invoice is to be charged; • the services provided;
• the dates of services.

Proposals shall include any early discounts and/or incentives offered.

10. INQUIRIES
All requests for clarification regarding this Request for Proposals (RFP) must be submitted in writing through the Q&A tab on the PlanetBids website. Questions must be received no later than 3:00 p.m.

Pacific Standard Time (PST) on Wednesday, May 28, 2025. All questions will be answered collectively via an addendum posted to the PlanetBids project page. Final responses will be issued no later than Friday, May 30, 2025.

From the date that this RFP is issued until a contractor is selected and the selection is announced, firms or public entities are not allowed to communicate outside the process set forth in this RFP with any City employee other than the contracting officer listed as a contact on PlanetBids. The City reserves the right to reject any proposal for violation of this provision. No questions other than written will be accepted, and no response other than written will be binding upon the City.

11. DISCRETION AND LIABILITY WAIVER
The City reserves the right to reject all proposals or to request and obtain from one or more Contractors submitting proposals, supplementary information as may be necessary for City staff to analyze the proposals pursuant to the consultant selection criteria.

The City is not liable for costs incurred by Contractors for the cost of the proposal. Contractors submitting a response to this RFP waive all rights to protest or seek any legal remedies whatsoever regarding any aspect of this RFP. All proposals shall be binding for a period of 90 days after the proposal due date. The City also reserves the following rights and options with respect to this RFP:

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 11 of 29

• To re-issue this RFP with or without change or modification, at any time prior to the City’s execution of an Agreement pursuant to this RFP;
• To cancel this RFP with or without issuing another request for proposals; • To supplement, amend, substitute or otherwise modify this RFP at any time prior to the City’s execution of an agreement pursuant to this RFP;
• To waive informality, defect, non- responsiveness and/or deviation from this RFP that is not, in the City’s sole judgment, material to the proposal;
• To request modification of some or all of the proposals following evaluation by the City; • To request clarifications of any proposals;
• To negotiate simultaneously, or otherwise, with one or more Proposer; and • To discontinue and resume negotiations with one or more Proposer

12. PIGGY BACK CLAUSE
Contractor shall indicate in its proposal, Section 6, if it agrees to extend the same prices, terms and conditions of their proposal to other public agencies that have delivery locations within the State of California limits.

Contractor’s response to this question will not be considered in award of the agreement resulting from this solicitation. If and when Contractor extends the prices, terms and conditions of their proposal to other public agencies, any resulting agreement shall be between contractor and the other public agencies and City shall bear no responsibility or liability for any agreements between Contractor and the other public agencies.

13. SAMPLE AGREEMENT
For the Contractor’s information, a sample copy of the standard Services Agreement is included to this RFP as Appendix A. By submitting a proposal, the Contractor agrees to be bound by the requirements under this Agreement.

14. COMPENSATION & PAYMENT
It is mutually understood and agreed by both parties that Contractor shall be compensated in accordance with the pricing sheet attached hereto. Prices shall remain firm for the initial term of the agreement and, thereafter, may be adjusted annually as provided in this paragraph. City does not guarantee any minimum or maximum amount of dollars to be spent under this agreement.

Negotiations for rate changes shall be commenced, by Contractor, a minimum of ninety days (90) pri
or to the expiration of the initial term. Any discount offered must allow for payment after receipt and acceptance of services, material or equipment and correct invoice, whichever is later. In no case will a discount be considered that requires payment in less than 30 days. Contractor shall levy no additional fees or surcharges of any kind during the term of the agreement without first obtaining approval from City in writing.

Pricing shall be inclusive of all applicable taxes.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 12 of 29

15. LIST OF FACILITIES
The following locations typically require guard services on an ongoing basis and may be subject to change.

Services at additional locations may be requested through the term of the agreement.

Location: City Parking Lots 1, 2, 3, 5, 8, 10, 12, 15, 16, 17, 18, & Intermodal Transit Center (I.T.C.)
Address: Multiple
Service Hours: 8:00am – 4:00pm
Typical Services
Requested:

Random Patrols 8:00am – 4:00pm with a maximum of four (4) patrols a day

Location: Monterey Street
Address: 20 E Market Street
Service Hours: 24 hours a day, seven days a week
Typical Services
Requested:

Random Patrols once an hour every day, seven days a week. Continuous Patrol 9:00pm-2:00am Friday-Saturday, Secure/lockdown and open facility seven (7) days a week

Location: Salinas Street Garage (Permit Center)
Address: 342 Salinas Street
Service Hours: 6:00pm-7:00am
Typical Services
Requested:

Random Patrols once an hour

Location: Salinas Permit Center
Address: 65 West Alisal
Service Hours: Monday – Friday 7:30am – 6:00pm
Typical Services
Requested:

Provide continuous patrol coverage in the morning (7:30 am-9:00am) and evening (5:00pm – 6:00pm) hours, Monday through Friday.

Conduct three (3) randomized patrols between the hours of 9:00 a.m. and 4:30 pm, Monday- Friday. Patrol coverage must include the abutting Salinas Street Parking Garage.

Location: Salinas City Hall
Address: 200 Lincoln Avenue
Service Hours: Monday - Friday 9am-4pm
Typical Services
Requested:

Period Patrols between 9:00am – 4:00pm around City Hall and Former Police Department

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 13 of 29

Location: Steinbeck Library
Address: 350 Lincoln Ave
Service Hours: Monday 10am-6pm
Tuesday 12pm-8:15pm
Wednesday 11:30am-6pm
Thursday 12pm-8:15pm
Friday & Saturday 10am-6pm
Sunday 1pm-6pm
Typical Services
Requested:

Continuous Patrol throughout operating hours. Current request: 75% of patrol time is devoted to interior/in-facility patrols, 25% of patrol time is devoted to exterior and parking lot patrol

Location: Salinas Recreation Center
Address: 320 Lincoln Ave
Service Hours: 8:00am – 8:00pm Monday - Friday
Typical Services
Requested:

Outside Random Patrols once an hour.

Location: City Maintenance Services Yard
Address: 426 Work Street
Service Hours: Sunset - Sunrise
Typical Services
Requested:

Two (2) Random Patrols per Night.

Location: Salinas Municipal Airport
Address: 30 Mortensen Street
Service Hours: Sunset - Sunrise
Typical Services
Requested:

Three (3) Random Patrols per Night.

Location: Sherwood Hall Community Center
Address: 940 N. Main Street
Service Hours: Event Security Services, various
Typical Services
Requested:

Services requested will vary and are event dependent. Specific work detail will be specified on individual event basis. Typical events include music performances and recitals, seminars, conferences, graduations, community meetings, etc.

Location: Salinas City Center Improvement Association
Address: Downtown Area
Service Hours: Monday - Thursday 6am-8pm
Friday & Saturday 6am – 12am
Typical Services
Requested:

Continuous Patrol of the improvement district by two (2) security officers throughout operating hours

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 14 of 29

ATTACHMENT 1 – PRICE SCHEDULE
The following rate shall be provided:

Supervisor Unarmed Cost
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Security Officer
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Patrol Rate (including vehicle)
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Alarm Response
Response Rate$ /hr.

COMMUNICATION EQUIPMENT
2-Way Radio Rate $ /hr.

Cellular Phone Rate $ /hr.

Cell/Radio $ /hr.

~End of Attachment 1~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 15 of 29

ATTACHMENT 2 – SIGNATURE PAGE / VERIFICATION

OF LICENSURE
By submission of a proposal, Proposer attests to having possession of a valid private patrol operator license issued by the State of California. Such license authorizes a Contractor to contract to perform the type of work required by the specifications. Should the Contractor fail to provide below the number of Contractor’s State of California License and City of Salinas, Patrol Service Permit, the City may reject this proposal.

Proposer:

BY:

TITLE:

MAILING ADDRESS:

(City) (State) (Zip)
TELEPHONE NUMBER:

STATE OF CALIFORNIA LICENSE NO.:
(Private Patrol Operators License)

CITY OF SALINAS PRIVATE-PATROL OPERATOR REGISTRATION
CARD NO.:

PROPOSER’S Signature Date

~End of Attachment 2~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 16 of 29

ATTACHMENT 3 – LOCAL VENDOR DECLARATION
FORM

~End of Attachment 3~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 17 of 29

APPENDIX A: SAMPLE AGREEMENT

AGREEMENT

FOR PROFESSIONAL SERVICES

BETWEEN

THE CITY OF SALINAS AND
[CONSULTANT’S LEGAL NAME *]

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 18 of 29

AGREEMENT FOR PROFESSIONAL SERVICES BETWEEN
THE CITY OF SALINAS AND __________________

This Agreement for Professional Services (the “Agreement” and/or “Contract”) is made and entered into this ____ day of ______, 20_, between the City of Salinas, a California Charter city and municipal corporation (hereinafter “City”), and [__________________], a [California corporation/limited liability company/dba/etc.] (hereinafter “Consultant”).

RECITALS

WHEREAS, Consultant represents that he, she, or it is specially trained, experienced, and competent to perform the special services which will be required by this Agreement; and

WHEREAS, Consultant is willing to render such professional services, as hereinafter defined, on the following terms and conditions.

NOW, THEREFORE, City and Consultant agree as follows:

TERMS

1. Scope of Service. The project contemplated and the scope of Consultant’s services are described in Exhibit B, attached hereto and incorporated herein by reference.

2. Term; Completion Schedule. This Agreement shall commence on [XXX], and shall terminate on [XXX], unless extended in writing by either party upon (30) days written notice.

This Agreement may be extended only upon mutual written consent of the parties, and may be terminated only pursuant to the terms of this Agreement.

3. Compensation. City hereby agrees to pay Consultant for services rendered the City pursuant to this Agreement on a time and materials basis according to the rates of compensation of [or as set forth in Exhibit B] . The total amount of compensation to be paid under this Agreement shall not exceed [__________________dollars ($__________________)].

4. Billing. Consultant shall submit to City an itemized invoice, prepared in a form satisfactory to City, describing its services and costs for the period covered by the invoice.

Except as specifically authorized by City, Consultant shall not bill City for duplicate services performed by more than one person. Consultant’s bills shall include the following information to which such services cost or pertain:

(A) A brief description of services performed;
(B) The date the services were performed;
(C) The number of hours spent and by whom;
(D) A brief description of any costs incurred; and
(E) The Consultant’s signature.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 19 of 29

Any such invoices shall be in full accord with any and all applicable provisions of this Agreement.

City shall make payment on each such invoice within thirty (30) days of receipt; provided, however, that if Consultant submits an invoice which is incorrect, incomplete, or not in accord with the provisions of this Agreement, City shall not be obligated to process any payment to Consultant until thirty (30) days after a correct and complying invoice has been submitted by Consultant. The City shall process undisputed portion immediately.

5. Meet & Confer. Consultant agrees to meet and confer with City or its agents or employees with regard to services as set forth herein as may be required by the City to ensure timely and adequate performance of the Agreement.

6. Additional Copies . If City requires additional copies of reports, or any other material which Consultant is required to furnish as part of the services under this Agreement, Consultant shall provide such additional copies as are requested, and City shall compensate Consultant for the actual costs related to the production of such copies by Consultant.

7. Responsibility of Consultant. By executing this Agreement, Consultant agrees that the services to be provided and work to be performed under this Agreement shall be performed in a fully competent manner. By executing this Agreement, Consultant further agrees and represents to City that the Consultant possesses, or shall arrange to secure from others, all of the necessary professional capabilities, experience, resources, and facilities necessary to provide the City the services contemplated under this Agreement and that City relies upon the professional skills of Consultant to do and perform Consultant’s work. Consultant further agrees and represents that Consultant shall follow the current, generally accepted practices in this area to the profession to make findings, render opinions, prepare factual presentations, and provide professional advice and recommendations regarding the projects for which the services are rendered under this Agreement.

8. Responsibility of City. To the extent appropriate to the projects to be completed by Consultant pursuant to this Agreement, City shall:

(A) Assist Consultant by placing at its disposal all available information pertinent to the projects, including but not limited to, previous reports and any other data relative to the projects. Nothing contained herein shall obligate City to incur any expense in connection with completion of studies or acquisition of information not otherwise in the possession of City.

(B) Examine all studies, reports, sketches, drawings, specifications, proposals, and other documents presented by Consultant, and render verbally or in writing as may be appropriate, decisions pertaining thereto within a reasonable time so as not to delay the services of Consultant.

(C) City Manager, or his designee, shall act as City’s representative with respect to the work to be performed under this Agreement. Such person shall have the complete authority

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 20 of 29

to transmit instructions, receive information, interpret and define City’s policies and decisions with respect to materials, equipment, elements, and systems pertinent to Consultant’s services.

City may unilaterally change its representative upon notice to the Consultant.

(D) Give prompt written notice to Consultant whenever City observes or otherwise becomes aware of any defect in a project.

9. Acceptance of Work Not a Release. Acceptance by the City of the work to be performed under this Agreement does not operate as a release of Consultant from professional responsibility for the work performed.

10. Indemnification and Hold Harmless.

Consultant shall defend, indemnify, and hold harmless the City and its officers, officials, employees, volunteers, and agents from and against any and all liability, loss, damage, expense, costs (including without limitation costs and fees of litigation) of every nature arising out of or in connection with Consultant’s performance of work hereunder, including the performance of work of any of Consultant’s subcontractors or agents, or Consultant’s failure to comply with any of its obligations contained in the agreement, except such loss or damage which was caused by the sole negligence or willful misconduct of the City.

11. Insurance. Consultant shall procure and maintain for the duration of this Agreement insurance meeting the requirements specified in Exhibit A hereto.

12. Access to Records. Consultant shall maintain all preparatory books, records, documents, accounting ledgers, and similar materials including but not limited to calculation and survey notes relating to work performed for the City under this Agreement on file for at least three (3) years following the date of final payment to Consultant by City. Any duly authorized representative(s) of City shall have access to such records for the purpose of inspection, audit, and copying at reasonable times during Consultant’s usual and customary business hours.

Consultant shall provide proper facilities to City’s representative(s) for such access and inspection.

13. Non-Assignability. It is recognized by the parties hereto that a substantial inducement to City for entering into this Agreement was, and is, the professional reputation and competence of Consultant. This Agreement is personal to Consultant and shall not be assigned by it without express written approval of the City.

14. Changes to Scope of Work. City may at any time, and upon a minimum of ten (10) days written notice, seek to modify the scope of services to be provided for any project to be completed under this Agreement. Consultant shall, upon receipt of said notice, determine the impact on both time and compensation of such change in scope and notify City in writing. Upon agreement between City and Consultant as to the extent of said impacts to time and compensation, an amendment to this Agreement shall be prepared describing such changes.

Execution of the amendment by City and Consultant shall constitute the Consultant’s notice to proceed with the changed scope.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 21 of 29

15. Ownership of Documents. Title to all final documents, including drawings, specifications, data, reports, summaries, correspondence, photographs, computer software (if purchased on the City’s behalf), video and audio tapes, software output, and any other materials with respect to work performed under this Agreement shall vest with City at such time as City has compensated Consultant, as provided herein, for the services rendered by Consultant in connection with which they were prepared. City agrees to hold harmless and indemnify the Consultant against all damages, claims, lawsuits, and losses of any kind including defense costs arising out of any use of said documents, drawings, and/or specifications on any other project without written authorization of the Consultant.

16. Termination.

(A) City shall have the authority to terminate this Agreement, upon ten days written notice to Consultant, as follows:

(1) If in the City’s opinion the conduct of the Consultant is such that the interest of the City may be impaired or prejudiced, or

(2) For any reason whatsoever.

(B) Upon termination, Consultant shall be entitled to payment of such amount as fairly compensates Consultant for all work satisfactorily performed up to the date of termination based upon the Consultant’s rates shown in Exhibit B and/or Section 3 of this Agreement, except that:

(1) In the event of termination by the City for Consultant’s default, City shall deduct from the amount due Consultant the total amount of additional expenses incurred by City as a result of such default. Such deduction from amounts due Consultant are made to compensate City for its actual additional costs incurred in securing satisfactory performance of the terms of this Agreement, including but not limited to, costs of engaging another consultant(s) for such purposes. In the event that such additional expenses shall exceed amounts otherwise due and payable to Consultant hereunder, Consultant shall pay City the full amount of such expense.

(C) In the event that this Agreement is terminated by City for any reason, Consultant shall:

(1) Upon receipt of written notice of such termination promptly cease all services on this project, unless otherwise directed by City; and

(2) Deliver to City all documents, data, reports, summaries, correspondence, photographs, computer software output, video and audio tapes, and any other materials provided to Consultant or prepared by or for Consultant or the City in connection with this Agreement. Such material is to be delivered to City in completed form; however, notwithstanding the provisions of Section 15 herein, City may condition payment for

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 22 of 29

services rendered to the date of termination upon Consultant’s delivery to the City of such material.

(D) In the event that this Agreement is terminated by City for any reason, City is hereby expressly permitted to assume the projects and complete them by any means, including but not limited to, an agreement with another party.

(E) The rights and remedy of the City and Consultant provided under this Section are not exclusive and are in addition to any other rights and remedies provided by law or appearing in any other section of this Agreement.

17. Compliance with Laws, Rules, and Regulations . Services performed by Consultant pursuant to this Agreement shall be performed in accordance and full compliance with all applicable federal, state, and City laws and any rules or regulations promulgated thereunder.

18. Exhibits Incorporated. All exhibits referred to in this Agreement and attached to it are hereby incorporated in it by this reference. In the event there is a conflict between any of the terms of this Agreement and any of the terms of any exhibit to the Agreement, the terms of the Agreement shall control the respective duties and liabilities of the parties.

19. Independent Contractor. It is expressly understood and agreed by both parties that Consultant, while engaged in carrying out and complying with any of the terms and conditions of this Agreement, is an independent contractor and not an employee of the City. Consultant expressly warrants not to represent, at any time or in any manner, that Consultant is an employee or servant of the City.

20. Integration and Entire Agreement. This Agreement represents the entire understanding of City and Consultant as to those matters contained herein. No prior oral or written understanding shall be of any force or effect with respect to those matters contained herein. This Agreement may not be modified or altered except by amendment in writing signed by both parties.

21. Jurisdiction and Venue. This Agreement shall be governed by and construed in accordance with the laws of the State of California, County of Monterey, and City of Salinas.

Jurisdiction of litigation arising from this Agreement shall be in the State of California, in the County of Monterey or in the appropriate federal court with jurisdiction over the matter.

22. Severability. If any part of this Agreement is found to be in conflict with applicable laws, such part shall be inoperative, null and void insofar as it is in conflict with said laws, but the remainder of the Agreement shall continue to be in full force and effect.

23. Notices.

(A) Written notices to the City hereunder shall, until further notice by City, be addressed to:

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 23 of 29

City Manager
City of Salinas
200 Lincoln Avenue
Salinas, California 93901

With a copy to:

City Attorney
City of Salinas
200 Lincoln Avenue
Salinas, California 93901

(B) Written notices to the Consultant shall, until further notice by the Consultant, be addressed to:

[Contact Information for Consultant including Title, Address, Email, and Phone #]

(C) The execution of any such notices by the City Manager shall be effective as to Consultant as if it were by resolution or order of the City Council, and Consultant shall not question the authority of the City Manager to execute any such notice.

(D) All such notices shall either be delivered personally to the other party’s designee named above, or shall be deposited in the United States Mail, properly addressed as aforesaid, postage fully prepaid, and shall be effective the day following such deposit in the mail.

24. Nondiscrimination. During the performance of this Agreement, Consultant shall not discriminate against any employee or applicant for employment because of race, color, religion, ancestry, creed, sex, national origin, familial status, sexual orientation, age (over 40 years) or disability. Consultant shall take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, color, religion, ancestry, creed, sex, national origin, familial status, sexual orientation, age (over 40 years) or disability.

25. Conflict of Interest. Consultant warrants and declares that it presently has no interest, and shall not acquire any interest, direct or indirect, financial or otherwise, in any manner or degree which will render the services required under the provisions of this Agreement a violation of any applicable local, state or federal law. Consultant further declares that, in the performance of this Agreement, no subcontractor or person having such an interest shall be employed. In the event that any conflict of interest should nevertheless hereinafter arise, Consultant shall promptly notify City of the existence of such conflict of interest so that City may determine whether to terminate this Agreement. Consultant further warrants its compliance with the Political Reform Act (Government Code section 81000 et seq.) and Salinas City Code Chapter 2A that apply to Consultant as the result of Consultant’s performance of the work or services pursuant to the terms of this Agreement.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 24 of 29

26. Headings. The section headings appearing herein shall not be deemed to govern, limit, modify, or in any manner affect the scope, meaning or intent of the provisions of this Agreement.

27. Attorneys’ Fees. In case suit shall be brought to interpret or to enforce this Agreement, or because of the breach of any other covenant or provision herein contained, the prevailing party in such action shall be entitled to recover their reasonable attorneys’ fees in addition to such costs as may be allowed by the Court. City’s attorneys’ fees, if awarded, shall be calculated at the market rate.

28. Non-Exclusive Agreement. This Agreement is non- exclusive and both City and Consultant expressly reserves the right to contract with other entities for the same or similar services.

29. Rights and Obligations Under Agreement. By entering into this Agreement, the parties do not intend to create any obligations express or implied other than those set out herein; further, this Agreement shall not create any rights in any party not a signatory hereto.

30. Licenses. If a license of any kind, which term is intended to include evidence of registration, is required of Consultant, its representatives, agents or subcontractors by federal, state or local law, Consultant warrants that such license has been obtained, is valid and in good standing, and that any applicable bond posted in accordance with applicable laws and regulations.

31. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original, but all of which together shall constitute a single agreement.

32. Legal Representation. Each party affirms that it has been represented, if it so chose, by legal counsel of its own choosing regarding the preparation and the negotiation of this Agreement and the matters and claims set forth herein, and that each of them has read this Agreement and is fully aware of its contents and its legal effect. Neither party is relying on any statement of the other party outside the terms set forth in this Agreement as an inducement to enter into this Agreement.

33. Joint Representation. The language of all parts of this Agreement shall in all cases be construed as a whole, according to its fair meaning, and not strictly for or against any party. No presumptions or rules of interpretation based upon the identity of the party preparing or drafting the Agreement, or any part thereof, shall be applicable or invoked.

34. Warranty of Authority. Each party represents and warrants that it has the right, power, and authority to enter into this Agreement. Each party further represents and warrants that it has given any and all notices, and obtained any and all consents, powers, and authorities, necessary to permit it, and the persons entering into this Agreement for it, to enter into this Agreement.

35. No Waiver of Rights. Waiver of a breach or default under this Agreement shall not constitute a continuing waiver or a waiver of a subsequent breach of the same or any other provision of this Agreement. The failure to provide notice of any breach of this Agreement or

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 25 of 29

failure to comply with any of the terms of this Agreement shall not constitute a waiver thereof.

Failure on the part of either party to enforce any provision of this Agreement shall not be construed as a waiver of the right to compel enforcement of such provision or any other provision. A waiver by the City of any one or more of the conditions of performance under this Agreement shall not be construed as waiver(s) of any other condition of performance under this Agreement.

IN WITNESS WHEREOF, the parties hereto have made and executed this Agreement on the date first written above.

CITY OF SALINAS

____________________________
René Mendez, City Manager

APPROVED AS TO FORM:

_________________________
□ Christopher A. Callihan, City Attorney, or
□ Rhonda Combs, Assistant City Attorney

CONSULTANT

___________________________________

By (Printed Name): ___________________
Its (Title): ___________________________

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 26 of 29

Exhibit A- Insurance Requirements

Insurance Requirements
Consultant shall procure and maintain for the duration of the Agreement insurance against claims for injuries to persons or damage to property which may arise from or in connection with the performance of the work hereunder and the results of that work by the Consultant, his agents, representatives, employees, or subcontractors. With respect to General Liability and Professional Liability, coverage should be maintained for a minimum of five (5) years after Agreement completion.

MINIMUM SCOPE AND LIMIT OF INSURANCE
Coverage shall be at least as broad as:
(A) Commercial General Liability (“CGL”): Insurance Services Office Form (“ISO”) CG 00 01 covering CGL on an occurrence basis, including products and completed operations, property damage, bodily injury, and personal & advertising injury with limits no less than $1,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit. (B) Automobile Liability: ISO Form CA 0001 covering any auto, or if Consultant has no owned autos, hired and non- owned, with limits no less than $1,000,000 per accident for bodily injury and property damage.
(C) Workers’ Compensation insurance as required by the State of California, with Statutory Limits, and Employer’s Liability Insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.
(D) Professional Liability (also known as Errors and Omissions) insurance appropriate to the work being performed, with limits no less than $1,000,000 per occurrence or claim, $2,000,000 aggregate per policy period of one year.

If the Consultant maintains broader coverage and/or higher limits than the minimums shown above, the City of Salinas requires and shall be entitled to the broader coverage and/or higher limits maintained by the Consultant. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the City.

OTHER INSURANCE PROVISIONS
The insurance policies are to contain, or be endorsed to contain, the following provisions:

Additional Insured Status
The City of Salinas, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Consultant including materials, parts, or equipment furnished in connection with such work or operations. General liability coverage can be provided in the form of an endorsement to the Consultant’s insurance (at least as broad as ISO Form CG 20 10, CG 11 85, or both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 forms if later revisions used).

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 27 of 29

Primary Coverage
For any claims related to this Agreement or the project described within this Agreement, the Consultant’s insurance coverage shall be primary coverage at least as broad as ISO Form CG 20 01 04 13 as respects the City, its officers, officials, employees, and volunteers. Any insurance or self-insurance maintained by the City, its officers, officials, employees, or volunteers shall be excess of the Consultant’s insurance and shall not contribute with it.

Notice of Cancellation
Each insurance policy required above shall provide that coverage shall not be canceled, except with notice to the City.

Waiver of Subrogation
Consultant hereby grants to City a waiver of any right to subrogation which any insurer of said Consultant may acquire against the City by virtue of the payment of any loss under such insurance. Consultant agrees to obtain any endorsement that may be necessary to affect this waiver of subrogation, but this provision applies regardless of whether or not the City has received a waiver of subrogation endorsement from the insurer.

The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of the City of Salinas for all work performed by the Consultant, its employees, agents, and subcontractors.

Self-Insured Retentions
Self-insured retentions must be declared by Consultant to and approved by the City. At the option of the City, Consultant shall provide coverage to reduce or eliminate such self-insured retentions as respects the City, its officers, officials, employees, and volunteers; or the consultant shall provide evidence satisfactory to the City guaranteeing payment of losses and related investigations, claim administrations, and defense expenses. The policy language shall provide, or be endorsed to provide, that the self-insured retention may be satisfied by either the named insured or City.

Acceptability of Insurers
Insurance is to be placed with insurers with a current A.M. Best’s rating of no less than A:VII, unless otherwise acceptable to the City.

Claims Made Policies
If any of the required policies provide coverage on a claims-made basis:

1. The Retroactive Date must be shown and must be before the date of this Agreement or the beginning of Agreement work.

2. Insurance must be maintained and evidence of insurance must be provided for at least five (5) years after completion of the Agreement of work.

3. If coverage is canceled or non -renewed, and not replaced with another claims -made policy form with a Retroactive Date prior to the Agreement effective date, the Consultant must purchase “extended reporting” coverage for a minimum of five (5) years after completion of Agreement work.

4. A copy of the claims reporting requirements must be submitted to the City for review.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 28 of 29

Verification of Coverage
Consultant shall furnish the City with original certificates and amendatory endorsements or copies of the applicable insurance language effecting coverage required by this Agreement. All certificates and endorsements are to be received and approved by the City before work commences. However, failure to obtain the required documents prior to the work beginning shall not waive the Consultant’s obligation to provide them. The City reserves the right to require complete, certified copies of all required insurance policies, including endorsements required by these specifications, at any time.

Subcontractors
Consultant shall require and verify that all sub-consultants and/or subcontractors maintain insurance meeting all the requirements stated herein, and Consultant shall ensure that Entity is an additional insured on insurance required from such sub-consultants and/or subcontractors.

Special Risks or Circumstances
City reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other special circumstances.

Maintenance of Insurance
Maintenance of insurance by Consultant as specified shall in no way be interpreted as relieving Consultant of its indemnification obligations or any responsibility whatsoever and the Consultant may carry, at its own expense, such additional insurance as it deems necessary.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 29 of 29

Exhibit B- Scope of Service

[Scope of Service; Compensation]

~End of Appendix A~

247 PRIVATE SECURITY
“Securing the Future, Protecting the Present”
RFP Citywide Service Agreements to Provide
Uniformed Security Guard Services
SUBMITTED FOR:

City of Salinas
City Hall
Public Works Department
ATTN: Cristina Gonzalez
200 Lincoln Avenue
Salinas, CA 93901

Date: June 6, 2025

4208 N Freeway Blvd., #101, Sacramento, CA 95834
[email protected]
www.247privatesecurity.com
(805) 464-9371
LICENSE NO.: PPO120440
SUBMITTED BY: 247 PRIVATE SECURITY

ATTACHMENT C

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com

TABLE OF CONTENTS
SECTION 1: ................................ ................................................................................................................................. 1

1.1. COVER LETTER: ........................................................................................................................................................ 1

1.2. SIGNED SIGNATURE PAGE / VERIFICATION OF LICENSURE – ATTACHMENT 2: ....................................................... 2

1.3. RECEIPT OF SIGNED ADDENDA: .............................................................................................................................. 3 SECTION 2 – PRE-QUALIFICATION / LICENSING REQUIREMENTS: ..................................................................................4

2.1. OUR CAPABILITY AND PERFORMANCE HISTORY: .................................................................................................... 4

2.2. PROJECT MANAGER/DESIGNATED POINT OF CONTACT: ......................................................................................... 9

2.3. FIRM OVERVIEW AND PROFESSIONAL CERTIFICATIONS: ...................................................................................... 10 SECTION 3 – PROJECT EXPERIENCE AND REFERENCES: ............................................................................................... 13

3.1. KEY STAFF PERSONS: ............................................................................................................................................. 13

3.2. EXPERIENCE AND REFERENCE: .............................................................................................................................. 19

3.3. VIOLATIONS: .......................................................................................................................................................... 20 SECTION 4 – STATEMENT TO SERVICE ENTIRE CITY: .................................................................................................... 21 SECTION 5 – STATEMENT TO SERVICE SALINAS CITY CENTER AND ELIGIBLE NON-PROFIT GROUPS: .............................. 21 SECTION 6 – PRICING SCHEDULE – ATTACHMENT 1: ................................................................................................... 22 SECTION 7 – APPENDIX: ............................................................................................................................................ 23

7.1. VALUE ADDED SERVICE – TRACKTIK TECHNOLOGY PLATFORM: ........................................................................... 23

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 4
SECTION 2 – PRE-QUALIFICATION / LICENSING REQUIREMENTS:
247 Private Security, acknowledges that it meets all pre-qualification and licensing requirements as outlined in Section 3 of the RFP . Below, we referred to each of the required pre-qualification criteria and provided additional details demonstrating our capability to meet all pre-qualification and licensing requirements under this RFP .

2.1. O
UR CAPABILITY AND PERFORMANCE HISTORY:
247 Private Security brings over seven (7) years of expertise in delivering security solutions across California. Our management team collectively brings more than 24 years of experience in the security industry. We are a fully licensed, insured, and independent security provider with a strong track record of delivering services that align with the requirements of the City of Salinas for provision of Uniformed Security Guard Services.

Over the past five (5) years, we have successfully delivered security services to more than 35 clients in various sectors. Our service portfolio includes public facilities, educational institutions, healthcare centers, construction sites, transportation hubs, religious venues, residential communities, commercial properties, retail outlets, and event venues.

The following recent and ongoing projects highlight our experience providing similar services to those identified in the City’s Scope of Work:

1. HOPICS (Homeless Outreach Program Integrated Care System):

Providing 24/7 unarmed and vehicle patrol security for over 40 facilities across 30 projects, including interim housing, safe parking sites, and homeless shelters. This involves safeguarding more than 10,000 clients and 450 employees, exemplifying our ability to manage high-risk and complex urban environments.

2. East Side Union High School District:

Providing unarmed security services across multiple school sites including Andrew P . Hill High School and Overfelt Adult Center, Monday through Friday, from 5 PM to 10 PM. These deployments require managing student safety, access control, and on-site coordination with school administration.

3. Metro Crossing Master Association:

Night patrol services, 7 days a week, from 9 PM to 6 AM at residential complexes, focusing on crime deterrence, access verification, and neighborhood safety.

4. Metro One LPSG Partnership (Multiple Cities in CA):

We support Metro One with uniformed security services for brands such as Verizon, Nike, Nordstrom Rack, and CVS.

These projects involve seven-day-a-week patrols, access control, theft prevention, and after-hours premises security.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 5

5. Lighthouse Community Church:

Unarmed security guard services from 4 PM to 10 PM ensuring evening security during community events and administrative functions.

6. Guardian Eagle Security Inc. Partnership (Contract for Los Angeles Unified School District):

Subcontracted fire watch and patrol services at over 15 LAUSD sites, including high schools and elementary schools, demonstrating our compliance capacity and coordination with public agencies.

7. Ouster, Inc.:

Delivering security services for overnight coverage on weekdays and 24-hour coverage on weekends, ensuring protection of high-value technology assets.

8. O’Reilly:

Ongoing provision of guards 7 days a week, from 8 AM to 10:30 PM, for one of the busiest retail corridors in the region.

OUR CAPABILITIES IN BEHAVIORAL HEALTH RESPONSE:

As urban and public spaces increasingly intersect with behavioral health and housing crises, our team has responded by integrating Behavioral Health Protocol Training across our field force. Our officers receive training in:
❖ De- escalation and non-violent intervention
❖ Crisis management and trauma-informed care
❖ Mental health first aid and referral protocols
❖ Coordination with social workers, first responders, and municipal staff Thi
s has been critical in our work with HOPICS, shelters, transitional housing facilities, and educational environments where emotional and psychological volatility is a factor. We prepare our personnel to engage respectfully, assess situations accurately, and act responsibly in line with both public safety and humanitarian priorities.

SUCCESS RATE AND COST VS. BENEFIT:

Our client retention rate exceeds 90%, with the majority of our clients renewing contracts or expanding service scopes within the first 12 months. Our ability to reduce incidents and improve response times directly translates into measurable benefits for clients. For example:
❖ HOPICS saw a 4 0% reduction in unauthorized entry incidents within 90 days of contract start. ❖ Retail partners reported u p to 60% drop in theft-related losses during our deployment. ❖ Educational clients cite improved student and staff satisfaction in campus safety surveys, supporting a conducive learning environment.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 6
UNDERSTANDING OF CITY NEEDS:

Our experience across education, public spaces, homeless facilities, and high-traffic commercial environments enables us to understand and meet the requirements of the City of Salinas.

WE UNDERSTAND THAT THE CITY REQUIRES:
❖ Trained, professional, and independent security personnel capable of executing du ties across a wide range of facility types without direct City supervision.
❖ Visible deterrence and rapid incident response at high-traffic areas such as parking garages, transit centers, public libraries, and event venues.
❖ Ongoing patrol coverage - foot, bike, and vehicle - tailored to di fferent times of day, facility risks, and public activity patterns.
❖ Compliance with all applicable laws and codes, including the California Penal C ode, Business and Professions Code, OSHA regulations, and BSIS licensing requirements. ❖ Accurate and consistent reporting - daily activity logs, annual site assessments, and incident tracking - to support transparency and operational improvements.
❖ Behaviorally aware, culturally sensitive, and courteous personnel, especially for assign ments involving public interaction, vulnerable populations, or city service points like libraries and the Intermodal Transit Center.

We recognize that many of the facilities under this contract such as Monterey Street, Salinas Permit Center, Steinbeck Library, and Sherwood Hall, are community-facing and frequented by diverse groups, including the unhoused and individuals facing behavioral health challenges. Our teams are experienced in these scenarios and trained accordingly.

HOW WE ALIGN WITH SALINAS’ EXPECTATIONS?

1. Patrol Capability Across Facility Types:

With over 25 patrol vehicles, 18 golf carts, and 8 motorized bicycles in our fleet, we are equipped to meet the City’ s requirement for:
❖ Randomized and scheduled patrols
❖ Foot patrols in compact areas like libraries or event centers ❖ Vehicle patrols in large areas such as the City Maintenance Yard and Airport ❖ Standing guards in static posts, such as the ITC and City Hall Our
GPS-tracked patrol operations and incident reporting systems ensure verifiable compliance and real-time responsiveness.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 7

2. Behavioral Health Protocols and De-Escalation:

Many public spaces in Salinas experience complex social dynamics. Our work at HOPICS, shelters, and school campuses has prepared our officers to:
❖ Recognize and respond to signs of mental health crises ❖ Use trauma-informed communication techniques
❖ Apply non-violent crisis intervention and behavioral health protocols ❖ Coordinate with local authorities and social service partners when needed Thi
s behavioral intelligence is critical for areas like Monterey Street, Steinbeck Library, and the Downtown Improvement District, where interaction with unhoused or at-risk populations is routine.

3. Incident Response, Reporting & Compliance:

We understand that guards must:
❖ Respond immediately to alarms and emergencies (including panic/code alarms) ❖ Provide daily activity and incident reports
❖ Submit annual site assessments
❖ Ensure every report is timely, complete, and actionable W
e use TrackTik digital reporting platform that timestamps all activity logs and incident entries, which can be exported daily for City review. Supervisors review all reports for completeness and pattern recognition.

4. Regulatory and Legal Adherence:

We strictly comply with:
❖ Sections 11105, 12002, and 12033 of the California Penal Code ❖ Sections 7583.5 and 7583.12 of the California Business & Professions Code ❖ BSIS licensing standards for all guards
❖ Confidentiality and conflict- of- interest protocols, including training for all employees serving municipal contracts
Any replacement of personnel (due to performance or City request) will be fulfilled within two (2) hours, per City requirements.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 8

5. Training, Appearance, and Professional Conduct:

All guards assigned to City facilities will be:
❖ Professionally uniformed and well-groomed
❖ Trained in customer service, municipal protocols, and courteous public engag ement ❖ Provided with PPE and all required tools to perform their duties safely and effectively ❖ Re- trained annually and briefed on site-specific Patrol Orders Our dedicated Site Supervisors will ensure continual performance evaluation, shadowing, and feedback loops.

FACILITY-SPECIFIC FAMILIARITY:

We are confident in our ability to fulfill the unique coverage patterns and service expectations across all listed facilities , including:
❖ Random patrols at parking lots, maintenance yard, and airport (with visibility and deterrenc e) ❖ Interior-focused patrols at Steinbeck Library, Recreation Center, and Permit Cen ter (with behavioral sensitivity and customer service)
❖ Static posts and lockdown duties at ITC and Monterey Street ❖ Event-driven adaptability at Sherwood Hall and Downtown Improvement District E
very guard will be assigned only after receiving full orientation on that facility's Patrol Orders, event schedules, and communication protocols.

~ Remainder of Page Intentionally Left Blank ~

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 9

2.2. PROJECT MANAGER/DESIGNATED POINT OF CONTACT:
247 Private Security designates Mr. Ray Tahiri as the Project Manager for this contract. Ray will serve as the City's dedicated liaison and operational lead, responsible for contract execution, performance oversight, client coordination, and overall service quality.

Ray Tahiri is a seasoned operations leader with over a decade of combined experience in security operations, contract management, crisis response, and cross-functional coordination.

He has successfully overseen guard deployments for high-traffic environments which are very similar in scope and sensitivity to those outlined by the City of Salinas.

In his current role as Project Manager for 247 Private Security, Ray leads daily operations involving more than 250 active security professionals across California. He has extensive experience supporting contracts with various clients.

RELEVANT EXPERIENCE:
❖ Project Manager – 247 Private Security (2021–Present): L eads large-scale security deployments across California. Key contributions include coordinating multi-site patrol operations for both armed and unarmed security services. Ray is instrumental in ensuring our guards are compliant with BSIS and OSHA standards, and that daily reporting, site assessments, and client communications are timely and effective. His leadership has directly impacted successful partnerships, where the company provides similar services such as static post monitoring, alarm response, fire watch, and patrol operations. ❖ Operations Manager – SGP Security (2018–2021): D irected contract execution for various portfolio of clients, designed incident response protocols, and supervised security officers. ❖ Cultural Advisor & Translator – U.S. Military (2009–201 3): Supported high-risk security operations and provided situational analysis and communication support in conflict zones. This experience shaped his approach to risk management, threat detection, and interpersonal engagement in sensitive environments.

Ray’s qualifications align directly with the City’s expectations for a Project Manager who understands how to:
❖ Manage patrols and fixed posts across multiple sites, shift types, and risk levels. ❖ Implement behavioral health protocols in environments with vulnerable population s. ❖ Maintain reporting accuracy, transparency, and real-time responsiveness. ❖ Navigate municipal processes, safety regulations, and emergency protocols.

Ray will be available to the City 24/7, 365 days per year, and is committed to attending security and safety-related meetings at no additional cost to the City.

(805) 464-9371
[email protected]

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 10

2.3. FIRM OVERVIEW AND PROFESSIONAL CERTIFICATIONS:
247 Private Security is a full-fledged private security company holding California Private Patrol Operator (PPO) License No.

PPO120440 from the Bureau of Security and Investigative Services (BSIS), offering security services throughout California.

We have more than 7 years of industry experience and have been operating under the name “247 Private Security” since 2018. We operate 24 hours a day, 7 days a week, and 365 days a year to ensure the highest level of protection at all times for our clients.

LEGAL NAME: 786 Hastrust Inc. dba 247 Private Security
WEB ADDRESS: www.247privatesecurity.com

CORPORATE AND LOCAL ADDRESSES
247 Private Security is strategically positioned to provide security services across key regions in California. Our corporate office is located in Van Nuys, a neighborhood of Los Angeles, and our branch / local offices are in Sacramento, San Francisco, and Oakland.

❖ 14654 Victory Blvd., #218 Van Nuys, CA 91411
❖ 1999 Harrison Street, #1800, Oakland, CA 94612
❖ 4208 N Freeway Blvd., #101, Sacramento, CA 95834
❖ Sansome Street, #3500, San Francisco, CA 94104

LOS ANGELES

SACRAMENTO

SAN FRANCISCO

OAKLAND
California PPO License:

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 11
At 247 Private Security, we offer a comprehensive range of security services tailored to meet the unique needs of our clients

ORGANIZATIONAL CHART:

UNARMED GUARDS

ARMED GUARDS

FOOT, BIKE &

VEHICLE PATROL

EVENT SECURITY

FIRE WATCH

STANDING GUARD

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
P a g e | 12
We currently maintain a workforce of:
❖ 259 licensed security professionals
❖ 29 dedicated management and administrative personnel

C
OMPANY PHILOSOPHY & STRENGTHS:

Our philosophy is rooted in public safety, responsiveness, and proactive prevention. We emphasize partnership, professionalism, and accountability in every client relationship. Our key strengths are:
❖ 24/7/365 Availability
❖ Fully Licensed and Insured
❖ Extensive Training in Behavioral Health and Conflict De-escalation ❖ Fleet of 25 Patrol Vehicles and Support Equipment
❖ Multi-site Coordination Capabilities
❖ Technology-Enabled Reporting (TrackTik Real-Time Incident and Activity Logs) ❖ Culturally Aware, Community-Integrated Officers
❖ Rapid Guard Replacement and Service Scalability

MAJOR CUSTOMERS:

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 13
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
SECTION 3 – PROJECT EXPERIENCE AND REFERENCES:

3.1. KEY STAFF PERSONS:

For the successful implementation of security services under this project, 247 Private Security will designate our highly qualified management personnel with extensive experience in security management, operations, client relations, scheduling, and human resources. Our management team is composed of experienced professionals, each member plays a vital role and will ensure high-quality security service delivery, compliance, and operational efficiency for the City.

OMAR MOTAWAKEL:

Position and Role for This Project: Director of Operations Omar Mutawakel is a highly experienced security management professional with over 15 years of expertise in security operations, forensic analysis, and risk assessment. As Director of Operations at 247 Private Security, he is responsible for overseeing security programs, ensuring compliance with client requirements, and implementing strategic policies to enhance operational efficiency.

His leadership is backed by strong academic credentials and extensive experience in both private security and forensic training.

Education:
❖ Clinical Psychology with emphasis on Police Psychology, The Chicago Scho ol of Professional Phycology (2013)
❖ Master of Business Administration (MBA), University of La Verne (2001) – Emphasis on International Business and Public Affairs
❖ Bachelor of Science in Health Science, California State University, Northridge (1997) Certification & Training:
❖ Applied Forensic Services – Forensic Training & Hostage Negotiation (2011) ❖ Certified PPO Qualified Manager – California Bureau of Security & Investigative Services (BSIS) – PPO #120440
❖ Firearm Permit License #2660254
❖ Alarm Company License #93678
Summary of Relevant
Experience:
❖ Director of Operations – 247 Private Security (20 18- Present): Oversees security operations, manages client contracts, and ensures regulatory compliance.

Implements risk assessment strategies and enhances security protocols. ❖ Operations Manager/Private Investigator Analysist – Modern Pr otection (2009- 2018): Led private security investigations, developed security plans, and supervised security patrol teams for high-risk locations.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 14
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
RAY TAHIRI:

Position and Role for This Project: Project Manager

Ray Tahiri is a seasoned operations leader with a strong background in security logistics, crisis management, and compliance. As Project Manager at 247 Private Security, he is responsible for managing security deployments, coordinating teams, and ensuring the seamless execution of operational plans. His expertise in handling large-scale security operations makes him a key asset in ensuring high-quality service delivery.

Education: ❖ Advanced Security & Management Training
Certification & Training:
❖ ASIS Certification
❖ Use of Force, Power to Arrest
❖ Conflict Management
❖ Crowd Management
❖ Patrol Security
Summary of Relevant
Experience:
❖ Project Manager – 247 Private Security (2021-Present): Manages daily security operations, ensures compliance with regulations, and coordinates with clients for optimized security strategies.
❖ Operations Manager – SGP Security (2018-2021): Supervised security contracts, developed security response plans, and led field operations. ❖ Cultural Advisor & Translator – U.S. Military (2009-20 13): Assisted in high-risk operations, facilitated communication, and contributed to strategic security initiatives.

~ Remainder of Page Intentionally left Blank ~

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 15
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
ANA BUSTAMANTE:

Position and Role for This Project: Account Manager/Billing Point of Contact

Ana Bustamante is a dedicated security account management professional with over 10 years of extensive experience in client relations, contract management, and administrative oversight. As Account Manager at 247 Private Security, she ensures that client needs are met, service standards are maintained, and operational efficiency is optimized.

Education:
❖ Business Management – Pasadena City College (2023)
❖ Los Angeles City College (2012)
❖ High School – Downtown Business Magnet (2010)
Certification & Training: ❖ Professional Development in Security Operations & Client Relations Summary of Relevant
Experience:
❖ Account Manager – 247 Private Security (2025-Present): Oversees client relationships, ensures contract compliance, manages billing, and security service coordination.
❖ Account Manager/ HR & Administrative Manager – G uardian Eagle Security (2024- 2025): Managed client accounts, HR operations, and administrative functions, ensuring seamless security services and workforce compliance. ❖ Director of Security & Client Relations – Direct Solutions Se curity Group (2023- 2024): Led administrative and security operations, managed client accounts, and improved customer engagement strategies.
❖ Senior Account Manager – ATF Private Security (2022-2023): Managed high-profile security accounts, ensured service excellence, and handled client concerns. ❖ Office Manager/Admin – SGP Solutions (2021-2021 ): Managed administrative operations, HR functions, and client service coordination.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 16
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
Sofia Perez Sandoval:

Position and Role for This Project: Scheduler

Sofia Perez Sandoval is a highly skilled scheduling and logistics coordinator with extensive experience in workforce management, payroll processing, and client communication. As Scheduler at 247 Private Security, she ensures that all security personnel are deployed effectively while meeting operational demands and labor compliance requirements.

Education:
❖ Scheduling & Administrative Management Training
❖ High School Diploma – James Monroe High School
Certification & Training: ❖ Workforce Coordination & Payroll Systems Certification Summary of Relevant
Experience:
❖ Scheduler – 247 Private Security (2024-Present): Manages shift assignments, optimizes scheduling procedures, and ensures workforce allocation efficiency. ❖ Collections Representative – Grupo Estrella LLC (2021-Prese nt): Developed strong client communication and problem-solving skills in service coordination. ❖ Scheduler – Good Guard Security Inc. (2023-2024): Coordinated security teams, handled shift assignments, and optimized scheduling logistics. ❖ Bio Remediation & Mitigation Coordinator – CBC & Scope Enviro nmental (2023 – 2023): Coordinated bio-remediation and mitigation efforts, overseeing environmental hazard response and compliance. Managed project execution, safety protocols, and client coordination.

~ Remainder of Page Intentionally left Blank ~

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 17
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
Ahmad Mustafa:

Position and Role for This Project: Administrative & HR Manager

Ahmad Mustafa is an experienced HR and administrative professional with over 10 years of expertise in workforce management, regulatory compliance, and organizational administration.

As Administrative & HR Manager at 247 Private Security, he leads recruitment and personnel compliance, ensuring that all security personnel are properly trained and assigned per contract requirements.

Education: ❖ Bachelor of Business Administration (2018) Certification & Training:
❖ Professional in Human Resources (PHR) Certification
❖ Certified Administrative Professional (CAP)
❖ MOS: Microsoft Word Associate
❖ MOS: Microsoft Excel Associate
❖ MOS: Microsoft PowerPoint Associate
❖ Technical Writing – Purdue University Online Writing Lab ❖ Effective Business Writing – Udemy
❖ Writing Winning Technical Proposals – Lohfeld Consulting Group Summary of Relevant
Experience:
❖ Administrative & HR Manager – 247 Private Security (2024-Pres ent): Manages recruitment, compliance, and personnel development. Ensures training and licensing requirements are met.
❖ Senior HR & Administrative Specialist – Afghan Family Guidance Association (2021- 2024): Led HR initiatives, developed policies, and managed workforce relations. ❖ HR & Administrative Specialist – World Bank (2020-2021): Oversaw talent acquisition, employee evaluations, and HR compliance for multinational teams. ❖ HR & Administrative Coordinator – RET Germany (2016-2019): Managed payroll, recruitment, and compliance for an international humanitarian organization.

4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 18
247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
We currently maintain a workforce of 259 active, trained, and licensed security officers, with an additional 300+ pre-vetted personnel in our HR pool ready for rapid deployment. This substantial capacity allows us to deliver consistent and uninterrupted coverage across all required facilities of the City.

For this project, we are proposing a team of 100% full-time employees who each have more than five (5) years of professional security experience. Additionally, a majority of the proposed team is multilingual, with proficiency in both English and Spanish. This linguistic versatility supports effective communication with diverse community members and enhances the officers’ ability to perform their duties in culturally sensitive and linguistically varied environments.

Below is a list of the anticipated security officers for this contract. All individuals listed are current employees of 247 Private Security and fully certified by the California Bureau of Security and Investigative Services (BSIS):

SN FIRST NAME LAST NAME CURRENT CA GUARD CARD
NUMBER Full-Time Employee
1 Carlos Garcia 6436991 Yes
2 Jose Ernesto Aguilar 6450732 Yes
3 Ahmed Mohammed Ibrahim 6721949 Yes
4 Sergio Francisco Alfaro 6708662 Yes
5 Jaime Javier Luna 6806319 Yes
6 Olusegun Taiwo 6588976 Yes
7 Omer Omer 6689704 Yes
8 Yousaf Ahmad Akbari 6802019 Yes
9 Ahmed Abdalla Ibrahim 6681614 Yes
10 Edmond Ekwegh 6797705 Yes
11 Mohamed Aman Ali 6749864 Yes
12 Jorge Zarate 1712723 Yes
13 Robert Berton Gordy 1659084 Yes
14 Ahmad Massoud Niazi 6788597 Yes
15 Fernando F Vazquez 6733261 Yes
16 Yonies Hassan 6733680 Yes
17 Habibullah Fazli 6801419 Yes
18 Hamid Ahmadi 6297448 Yes
19 Luis Fernando Mazariegos 6602200 Yes
20 Joginder S Saini 6611468 Yes

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 19

3.2. EXPERIENCE AND REFERENCE:

Below is a list of our clients who can speak to the quality, reliability, and professionalism of our security services. These references reflect our proven ability to deliver exceptional security solutions across diverse environments. Additional references can be provided upon request as part of the City’s evaluation process:

SN Client Name Contact Person & Title Telephone / Email Contract Dates Description of Services & Role 1 HOPICS Charles Rutley, Lead Security
Officer
(213) 718-7219
[email protected] 2023 – Present
247 Private Security provides 24/7 on-site
and vehicle patrol services for over 30
projects, including 40+ buildings, interim
housing sites, and safe parking facilities.

Services protect 10,000+ clients and 450
employees.
2 East Side Union High
School District
(multiple facilities)
Minh Nguyen, Site Supervisor (408) 254-8110
[email protected] 2022 – Present
Full-time unarmed guards for daily campus
security from 5 PM – 10 PM, Monday
through Friday at high schools and adult
education centers, including Overfelt and
Independence Adult Center .
3 Metro Crossing
Master Association
(Residential
Community HOA)
Jamie Lee, Manager (734) 552-1355
[email protected] 2023 – Present
Nighttime unarmed security officers (9 PM –
6 AM, 7 days/week) for luxury residential
complexes. Duties include patrolling,
incident reporting, resident assistance,
property monitoring, and etc.

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 20
4 Lighthouse
Community Church
Andy Yueng, Director of Admin
& HR / Jeff Silva, Billing
Department
(310) 356-0950
[email protected]
/
[email protected]
2023 – Present
Unarmed security services daily from 4 PM
– 10 PM to secure church premises, assist
with congregation safety, and manage
incidents during community events and
gatherings.
5 Metro One LPSG
(National Retail
Security Partner)
Lisa Strydio, In-Charge (718) 864-2851
[email protected] 2023 – Present
Contracted to provide unarmed security
guards for major retail clients including
Verizon, Nike, Nordstrom Rack, and others
at multiple locations. Services include theft
deterrence, orderly traffic flow, access
control, parking facilities patrol, and
reporting.
6 Ouster, Inc. Matt Rudie, Global Facilities
Manager
(415) 283-8615
[email protected] 2024 – Present
Armed security services, Weekdays 11 PM –
7 AM and 24-hour weekend coverage.

Services include access control, incident
response, patrols, and etc.

3.3. VIO LATIONS:
247 Private Security (786 Hastrust Inc. dba 247 Private Security) affirms that from its establishment date to the present, the company has not received any notices of violation, corrective action notices, enforcement actions or orders, warning notices, or any other form of noncompliance documentation from any public agency, including but not limited to OSHA, BSIS, or any regulatory authority.

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 21
SECTION 4 – STATEMENT TO SERVICE ENTIRE CITY:
247 Private Security confirms our full capability and readiness to provide security services across all designated locations within the City of Salinas. This includes, but is not limited to, the Salinas Municipal Airport, Permit Center, libraries, recreational facilities, parking garages, parking lots, Train Stations, Sherwood Hall, and all other City-owned facilities identified in the Scope of Work and throughout the term of the contract.

We maintain a strong operational presence in Monterey County and possess the staffing, logistical capacity, and fleet resources necessary to support consistent and timely deployment across all service locations.

No additional fees will be applied for travel time to any of the City’s facilities listed in the RFP . All services will be delivered under the agreed-upon rates, with no hidden or added travel costs.

SECTION 5 – STATEMENT TO SERVICE SALINAS CITY CENTER AND ELIGIBLE NON-PROFIT GROUPS:
247 Private Security acknowledges and confirms our ability to provide security services to the Salinas City Center District (Downtown District) as well as to other eligible non-profit organizations located within the City of Salinas.

We are fully committed to extending the same terms, conditions, and rates outlined in our proposal “Section 6” to these groups, ensuring consistent service quality, reliability, and responsiveness. Our personnel are trained to operate effectively in high-traffic urban areas and community-centered environments, aligning with the public safety expectations of the City and its partner organizations.

~ Remainder of Page Intentionally Left Blank ~

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 22
SECTION 6 – PRICING SCHEDULE – ATTACHMENT 1:

ATTACHMENT 1 – PRICE SCHEDULE
The following rate shall be provided:

Supervisor Unarmed Cost
Pay Rate $ 20.00 /hr.

Bi
lling Rate $ 25.50 /hr.

Ov
ertime Rate $ 38.25 /hr.

Security Officer
Pay Rate $ 18. 00 /hr.

Billing Rate $ 24.00 /hr.

Ov
ertime Rate $ 36. 00 /hr.

Patrol Rate (including vehicle)
Pay Rate $ 19. 00 /hr.

Billing Rate $ 27.00 /hr.

Overtime Rate $ 40. 50 /hr.

Alarm Response
Response Rate $ 38. 00 /hr.

COMMUNICATION EQUIPMENT
2-Way Radio Rate $ 0.00 /hr.

Cellular Phone Rate $ 0.00 /hr.

Cel
l/Radio $ 0.00 /hr.

Referring to section 12 of RFP (Piggy Back Clause), we agree to extend the same prices, terms and conditions of our proposal to other public agencies that have delivery locations within the State of California limits.

~End of Attachment 1~

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 23
SECTION 7 – APPENDIX:

7.1. VALUE ADDED SERVICE – TRACKTIK TECHNOLOGY PLATFORM:

As a value-added service to enhance performance, transparency, and accountability, 247 Private Security will provide the City of Salinas with full access to our TrackTik workforce management and reporting system, at no additional cost. This advanced security operations software enables real-time visibility and communication between our guards, supervisors, and City personnel.

TrackTik’s integrated system includes GPS tracking, customizable patrol tour check-ins, automated incident reporting, mobile access, and client portals. This platform empowers City staff to monitor activities, review reports, and receive alerts in real time, ultimately improving coordination, safety oversight, and service quality. Our supervisors actively monitor all guard activities through the system’s live dashboard and are able to respond quickly to any discrepancies or emergencies.

The City will also receive periodic performance and activity reports, tailored to its needs.

TRACKTIK FUNCTIONALITY OVERVIEW:
❖ Live GPS Tracking
❖ Incident & Activity Reporting
❖ Automated Daily Reports
❖ Client Portal Access
❖ Scheduling & Timekeeping
❖ Geofenced Tour Checkpoints
❖ Photo Upload Capability
❖ Supervisor Dashboard
❖ Panic Button Integration
❖ Analytics & Performance Metrics

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 24
While using any Android or Apple Devices, Security Officers in the field can:

Report Incidents Update Daily
Activity Reports
Include Photos &
Audio Files
Mobile Patrol
Run Sheets
Receive Tasks &
Reminders
Communicate
with Dispatch
Clock In & Out
All of this information is GPS tracked and available in real-time in the Issue Monitor/ Dashboard
Dispatchers,
Supervisors & Admins
Maintenance Teams
and Vendors (TrackTik)
City Supervisors and
Representatives

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 25
TRACKTIK SAMPLE REPORTS:

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 26

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 27

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 28

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 29

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 30

247 PRIVATE SECURITY

Securing the Future, Protecting the Present
PPO: 120440
4208 N Freeway Blvd., #101, Sacramento, CA 95834
(805) 464-9371
www.247privatesecurity.com
P a g e | 31

CONTACT INFORMATION

247 PRIVATE SECURITY

RAY TAHIRI
Operations Manager
Email: r [email protected]
Cell: (8 05) 464-9371
Office: (866) 247-6506
F
ax: (818) 518-9913
W
ebsite: ww w.247privatesecurity.com
BRANCH/LOCAL OFFICES:
❖ 4208 N Freeway Blvd., #101, Sacramento, CA 95834
❖ 1999 Harrison Street, #1800, Oakland, CA 94612
❖ Sansome Street, #3500, San Francisco, CA 94104

CORPORATE OFFICE:
❖ 14654 Victory Blvd # 218, Van Nuys, CA 91411

Page 1 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

AGREEMENT FOR SERVICES BETWEEN

THE CITY OF SALINAS AND CITIGUARD INC

On Call Uniform Security Guard Services

THIS AGREEMENT is executed this 9th day of December, 2025, (“Agreement” or “Contract”) between the City of Salinas , a California Charter city and municipal corpora tion (hereinafter “City”) and Citiguard Inc, a California Stock Corporation (hereinafter “Contractor”).

IT IS HEREBY MUTUALLY AGREED AS FOLLOWS:

1. Scope.

Contractor hereby agrees to provide to the City, as the scope of services under this Agreement, the following services: Uniform Security Guard Services. Scope of work is further discussed in Uniformed Security Guard Services of City’s Request for Proposal, (Attachment B, attached hereto and incorporated herein by this reference) a nd Contractor’s Proposal dated 06/06/2025 (Attachment C, attached hereto and incorporated herein by this reference).

2. Timeliness.

Contractor shall perform all tasks in a timely fashion, as set forth more specifically in Section 3 below. Failure to so perform is hereby deemed a material breach of this Agreement, and City may terminate this Agreement with no further liability hereunder, or the city may agree in writing with Contractor to an extension of time.

3. Term.

This Agreement shall commence on December 1, 2025, and shall terminate on November 30, 2027, unless terminated earlier (the “Initial Term”). This Agreement may be renewed for three (3) optional one (1) year period s (“Renewal Terms”) upon the mutual written consent of the parties. This Agreement may be extended only upon mutual written consent of the parties and may be terminated only pursuant to the terms of this Agreement.

4. Payment.

City agrees to pay and Contractor agrees to accept as full and fair consideration for the performance of this Agreement, compensation in a total amount not to exceed Four Hundred Thousand Dollars ($ 400,000) annually, as more fully described in title of Contractor ’s fee schedule, Attachment C . Contractor has no right of reimbursement for expenses under this Agreement. Compensation shall become due and payable 30 days after City’s approval of Contractor’s submission of monthly written invoices to the City. The payment of any compensation shall be contingent upon performance of the terms and conditions of this Agreement to the satisfaction of the City. If City determines that the work set forth in the written invoice has not been performed in accordance with the terms of this Agreement, City shall not be responsible for payment until such time as the work has been satisfactorily performed.

5. Meet & Confer.

Contractor agrees to meet and confer with City or its agents or employees with regard to services as set forth herein as may be required by City to insure timely and adequate performance of this Agreement.

6. Insurance.

Contractor shall procure and maintain for the duration of this Agreement insurance meeting the requirements specified in Attachment A hereto.

Page 2 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

7. Indemnification. Contractor shall hold harmless, defend at its own expense, and indemnify City and its officers, officials, employees, agents, and volunteers from and against all liability, claims, damages, losses, and/or expenses including reasonable City attorney fees arising from all acts or omissions of Contractor or its officers, agents, or employees arising out of the performance of the work under this Contract, caused in whole or in part by any negligent act or omission of the Contractor, any subcontractor, anyone directly or indirectly employed by any of them, or anyone for whose acts any of them may be liable, except where caused by the sole negligence or willful misconduct of the City.

8. Licensing.

Contractor warrants that it is properly licensed to perform the work specified under this Agreement, including but not limited to possession of a current City business license.

9. Termination.

City may terminate this Agreement upon ten days’ written notice. The amount of damages, if any, as a result of such termination may be decided by negotiations between the parties or before a court of competent jurisdiction.

10. Agency.

In performing the services specified under this Agreement, Contractor is hereby deemed to be an independent contractor and not an agent or employee of City.

11. Non-A
ssignability. The rights and obligations of Contractor hereunder are not assignable and cannot be delegated without written consent of City.

12. Entire Agreement. This Agreement constitutes the entire Agreement between the p arties
hereto and supersedes any and all prior agreements, whether oral or written, relating to the subject matter thereof. Any modification of the Agreement will be effective only if it is in writing signed by both parties hereto.

13. Validity.

If any provision in this Agreement is held by a court of competent jurisdiction to be invalid, void or unenforceable, the remaining provisions will continue in full force without being impaired or invalidated in any way.

14. Counterparts.

This Agreement may be executed in multiple originals, each of which is deemed to be an original, and may be signed in counterparts.

15. Laws.

Contractor agrees that in the performance of this Agreement it will comply with all applicable State, Federal and local laws and regulations. This Agreement shall be governed by and construed in accordance with the laws of the State of California, County of Monterey, and City of Salinas.

16. Subject to Availability of Funds. In the event that t he City Council, or other governing
body, fails to appropriate or budget sufficient funds for the continuation of this agreement, or should funds become unavailable for any other reason, the City reserves the right to terminate this agreement upon written notice. This termination shall be effective as of the last day of the fiscal

Page 3 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

year for which funds were appropriated. Upon such termination, the Contractor will be limited to compensation for satisfactory services rendered up to the termination date.

17. Levine Act Disclosure Compliance (Cal Government Code Sec. 84308). Contractor hereby affirms and warrants that it has not contributed to the campaign of any elected or appointed City official an amount totaling more than $500 within twelve (12) months of the effective date of this Agreement, except as Contractor has dis closed within its Levine Act Disclosure Form submitted by Contractor to the City. Contractor agrees, that in the event it makes any contributions subject to the Levine Act’s disclosure requirements within twelve (12) months of the effective date of this Agreement, that it will file a Levine Act Disclosure Form (or Forms). Contractor acknowledges this duty of disclosure and that the City has made the Levine Act Disclosure Form(s) readily available on the City’s public internet site under Your Government / Transparency section for Contractor’s continuous compliance.

18. Electronic Execution of Agreement . T
he words “execution,” “signed,” “signature,” and
words of like import in this Agreement and shall be deemed to include electronic signatures or electronic records (including, without limitation, DocuSign and AdobeSign), each of which shall be of the same legal effect, validity, enforceability, and admissibility as a handwritten signature.

I
N WITNESS WHEREOF, this Agreement is entered into by the parties hereto on the day and year first written above.

CITY OF SALINAS

__________________________________
René Mendez, City Manager

APPROVED AS TO FORM:

_________________________________
Christopher A. Callihan, City Attorney, or
Rhonda Combs, Assistant City Attorney

CONTRACTOR

___________________________________

By (Printed Name): ___________________

Its (Title): ___________________________

Page 4 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

Attachment A
Insurance Requirements

Contractor shall procure and maintain for the duration of the contract, and for three years thereafter, insurance against claims for injuries to persons or damages to property which may arise from or in connection with the performance of the work hereunder by the Contractor, his/her/its officers, agents, representatives, employees, and/or subcontractors.

MINIMUM SCOPE AND LIMIT OF INSURANCE
Coverage shall be at least as broad as:

1. Commercial General Liability (“CGL”): Insurance Services Office ( “ISO”) Form CG 00 01 covering CGL on an occurrence basis, including products and completed operations, property damage, bodily injury and personal & advertising injury with limits no less than $2,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO Form CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit.

2. Automobile Liability: ISO Form CA 0001 covering Code 1 (any auto), with limits no less than $1,000,000 per accident for bodily injury and property damage.

3. Workers’ Compensation: as required by the State of California, with Statutory Limits, and Employers’ Liability insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.

4. Contractors’ Pollution Legal Liability and/or Asbestos Legal Liability and/or Errors and Omissions (if project involves environmental hazards) : with limits no less than $1,000,000 per occurrence or claim, and $2,000,000 policy aggregate, on an annual basis.

If the Contractor maintains broader coverage and/or higher limits than the minimums shown above, the Contractor requires and shall be entitled to the broader coverage and/or higher limits maintained by the Contractor. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the City.

Self-Insured Retentions
Self-insured retentions must be declared to and approved by the City. At the option of the City, either: the Contractor shall cause the insurer shall to reduce or eliminate such self -insured retentions as respects the City, its officers, officials, employees, and volunteers; or the Contractor shall provide a financial guarantee satisfactory to the City guaranteeing payment of losses and related investigat ions, claim administration, and defense expenses. The policy language shall provide, or be endorsed to provide, that the self -insured retention may be satisfied by either the named insured or City.

Other Insurance Provisions
The insurance policies are to contain, or be endorsed to contain, the following provisions:

1. The City, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Contractor including materials, parts, or equipment furnished in connection with such work or operations and automobiles owned, leased, hired, or borrowed by or on behalf of the Contractor. General liability coverage can be provided in the form of an endorsement to the

Page 5 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

Contractor’s insurance (at least as broad as ISO Form CG 20 10, CG 11 85 or both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 forms if later revisions used).

2. For any claims related to this project, the Contractor’s insurance coverage shall be primary insurance coverage at least as broad as ISO CG 20 01 04 13 as respects the City, its officers, officials, employees, and volunteers. Any insurance or self -insurance maintained by the City, its officers, officials, employees, or volunteers shall be excess of the Contractor’s insurance and shall not contribute with it.

3. Each insurance policy required by this clause shall provide that coverage shall not be canceled, except with notice to the City.

4. A copy of the claims reporting requirements must be submitted by Contractor to the City.

5. If the services involve lead-based paint or asbestos identification/remediation, the Contractor’s Pollution Liability policy shall not contain lead-based paint or asbestos exclusions. If the services involve mold identification/remediation, the Contractor ’s Pollution Liability policy shall not contain a mold exclusion, and the definition of Pollution shall include microbial matter, including mold.

Acceptability of Insurers
Insurance is to be placed with insurers authorized to conduct business in the state with a current A.M. Best rating of no less than A: VII, unless otherwise acceptable to the City.

Waiver of Subrogation
Contractor hereby agrees to waive rights of subrogation which any insurer of Contractor may acquire from Contractor by virtue of the payment of any loss. Contractor agrees to obtain any endorsement that may be necessary to affect this waiver of subrogation. The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of the City for all work performed by the Contractor, its employees, agents and subcontractors.

Verification of Coverage
Contractor shall furnish the City with original Certificates of Insurance including an additional insured endorsement and all required amendatory endorsements (or copies of the applicable policy language effecting coverage required by this clause) and a copy of the Declarations and Endorsement Page of the CGL policy listing all policy endorsements to City before work begins.

However, failure to obtain the required documents prior to the work beginning shall not waive the Contractor’s obligation to provide them. The City reserves the right to require complete, certified copies of all required insurance policies, including endorsements, required by these specifications, at any time.

Subcontractors
Contractor shall require and verify that all subcontractors maintain insurance meeting all the requirements stated herein, and Contractor shall ensure that City is an additional insured on insurance required from subcontractors. For CGL coverage subcontractors shall provide coverage with a form at least as broad as CG 20 38 04 13.

Maintenance of Insurance
Maintenance of insurance by Contractor as specified shall in no way be interpreted as relieving Contractor of its indemnification obligations or any responsibility whatsoever and the Contractor

Page 6 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

may carry, at its own expense, such additional insurance as it deems necessary.

Special Risks or Circumstances
City reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other special circumstances.

Page 7 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

Attachment B

Request for Proposal – Uniform Security Guard Services

Page 8 of 8 ends

Agreement for Services v. October 2025

CITIGUARD INC
NOVEMBER 2025

Attachment C

Contractor’s Proposal
REQUEST FOR PROPOSALS:

Uniformed Security Guard Services

Proposals are due by 3:00 pm (PST)
on Friday, June 6, 2025
City Hall
Public Works Department
ATTN: Cristina Gonzalez
200 Lincoln Avenue
Salinas, CA 93901

ATTACHMENT B

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 1 of 29

TABLE OF CONTENTS

1. INTRODUCTION ....................................................................................................................................... 2

2. GENERAL INFORMATION...................................................................................................................... 2

3. PROPOSER’S MINIMUM REQUIREMENTS .......................................................................................... 3

4. PROPOSAL SCHEDULE ........................................................................................................................... 4

5. CONTRACT TERM ................................................................................................................................... 4

6. EVALUATION AND SELECTION CRITERIA ........................................................................................ 4

7. SCOPE OF WORK ..................................................................................................................................... 5

8. PROPOSAL PACKAGE REQUIREMENTS ............................................................................................. 7

9. PRICING .................................................................................................................................................. 10

10. INQUIRIES .............................................................................................................................................. 10

11. DISCRETION AND LIABILITY WAIVER ........................................................................................... 10

12. PIGGY BACK CLAUSE .......................................................................................................................... 11

13. SAMPLE AGREEMENT ......................................................................................................................... 11

14. COMPENSATION & PAYMENT ........................................................................................................... 11

15. LIST OF FACILITIES .............................................................................................................................. 12 ATTACHMENT 1 – PRICE SCHEDULE ........................................................................................................... 14 ATTACHMENT 2 – SIGNATURE PAGE / VERIFICATION OF LICENSURE .............................................. 15 ATTACHMENT 3 – LOCAL VENDOR DECLARATION FORM ................................................................... 16 APPENDIX A: SAMPLE AGREEMENT ........................................................................................................... 17

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 2 of 29

1. INTRODUCTION
The City of Salinas (hereinafter referred to as the “City”) is requesting Proposals from qualified organizations (hereinafter referred to as “Proposer”) to establish a City- wide Service agreement to provide Unarmed Security Guard Services to various City Departments, the Salinas City Center (SCC) and other Salinas non-profit organizations, agencies and offices located throughout the City.

The awarded Contractor (hereinafter referred to as “Contractor”) will be expected to enter into an agreement for Professional Services (refer to Appendix A). Prior to submitting a proposal, Proposers are advised to carefully read the instructions below including the sample Professional Service Agreement and any solicitation attachments/exhibits. The Term is expected to be for two (2) years with three (3) one-year renewal options.

This solicitation is not intended to create an exclusive service agreement. City retains the ability, at its sole discretion, to select multiple Contractors and add qualified contractors after the signing of the agreement.

The full content of this RFP is available through the City’s PlanetBids Vendor Portal. Proposers can register as a “Prospective Bidder” in one of two ways:
• For FREE through PlanetBids Vendor Portal for the City of Salinas at https://www.planetbids.com/portal/portal.cfm?CompanyID=22949 • Directly via Planet Bids’ website for a FEE at https://vendorline.com/register and sign up for City of Salinas’ bid opportunities.

For assistance in downloading the documents, contact Planet Bids online or by calling 818-992-1771.

Written responses to timely inquiries will be posted on the Q/A tab of the City’s PlanetBids portal no later than 3:00pm, PST, Wednesday, May 28, 2025. Any interpretation of, or correction to, this RFP will be made only by addendum issued via PlanetBids. It is the responsibility of each Proposer to periodically check vendor portal to ensure that it has received and reviewed any and all addendas to this solicitation. The City will not be responsible for any other explanations, corrections to, or interpretations of the documents, including any oral information.

2. GENERAL INFORMATION
The City of Salinas is located on the Central Coast of California, approximately 106 miles south of San Francisco. Named for a nearby salt marsh, Salinas became the seat of Monterey County in 1872 and was incorporated in 1874. As the largest City in Monterey County, the City of Salinas boasts a population 156,600 persons. The City is approximately 23.22 square miles. Salinas and the Salinas Valley offer a unique combination of climate, natural resources and people. The Salinas Valley is known as "The Salad Bowl of the World" for its high- quality production of lettuce, broccoli, mushrooms and strawberries, along with numerous other crops and related service industries.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 3 of 29

HOMELESS POPULATION
The homeless population within the City of Salinas continues to be a concern to the citizens in the City and the County, local governments, and private property and business owners. Many issues and concerns concentrate around frequent trespassing, littering and loitering. Current Security Guard Services and the Salinas Police Department respond to homeless disturbances involving mental illness and or other disabilities including substance abuse. It is the expectation of the Contractor(s) to have a tested protocol for responding to calls for service that are respectful and sensitive to the rights of all people including those who appear to be or are homeless, and also the laws of the City as they may apply to public intoxication, loitering, sleeping or camping in the public -right-of-way. The selected security firms will have established communication links with the City police, County behavioral health, not-for profit service organizations and others supporting resources to help and support a security staff person's effort to de -escalate and assist a person with no home to live in, displaying erratic or unpredictable behavior in the public, and know how to best address situations that arise as a result of unsocial behavior.

SALINAS CITY CENTER IMPROVEMENT ASSOCIATION
In 2015, downtown property owners voted to form an improvement district and assess their properties.

Early in 2016, the property owners formed a 501(c)3 public benefit corporation called Salinas City Center Improvement Association (SCCIA). SCCIA is now up and running, with a district manager and a full slate of volunteer committees working hard to implement the vision for a vibrant downtown. The Salinas City Center is made up of 130 property owners (which includes the City and County) that own 217 properties within the District.

The Contractor shall have experience in similar types of services. All Proposers responding to this Request for Proposal (RFP) will be evaluated based the expertise, prior experience on similar projects, demonstrated competence, ability to meet the requested services, adequate staffing, reference check, understanding of services, cost and responsiveness to the needs and concerns of the City of Salinas.

3. PROPOSER’S MINIMUM REQUIREMENTS
Interested and qualified Proposers that can demonstrate their ability to successfully provide the required services outlined in Section 7 – Scope of Work and Section 15 – List of Facilities , of this RFP are invited to submit a proposal, provided they meet the following requirements. If these requirements are not met, the proposal may not receive further consideration, as determined in the sole discretion of the City.
• The Proposer must have 5 years’ experience, within the last 10 years, and demonstrate a comprehensive understanding and practice of the needs of the City, or provide evidence of services equivalent or similar to the services identified in Section 7 – Scope of Work and Section 15 – List of Facilities, and indicate success rate of such services, with data that indicates the cost versus benefit of hiring this company

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 4 of 29

• The Proposer must have a Project Manager/Designated Point of Contact assigned to the Contract, with prior experience working with a similar municipality. • The Proposer must have appropriate certificates/professional accreditations for the state of California to provide requested services, and provide a full spectrum of services offered by the proposer, as well as the organizational structure/chart, company history, company philosophy, overview of services, company strengths, major customers and services provided as requested in Section 7 – Scope of Work and Section 15 – List of Facilities.

4. PROPOSAL SCHEDULE
The following schedule has been established for this RFP. The City of Salinas reserves the right to modify this schedule if it is in its best interest to do so. Notice of changes shall be posted on Planet Bids via an Addendum to this RFP.

TASK DATE
ISSUE RFP May 16, 2025

DEADLINE FOR WRITTEN

QUESTIONS
3pm, PST, Wednesday May 28, 2025
ANSWERS TO Q&A Friday, May 30, 2025

PROPOSAL SUBMITTAL

DEADLINE
3pm, PST Friday, June 6, 2025
NOTIFICATION OF SELECTION Friday June 13, 2025
CITY COUNCIL AWARD Tuesday July 1, 2025
Dates are subject to change.

5. CONTRACT TERM
The term of the Agreement(s) shall be for a period of two (2) years with the option to extend the agreement for three (3) optional one (1) year periods. City is not required to state a reason if it elects not to renew. Both parties shall agree upon rate extension(s) or changes in writing.

The Agreement shall contain a clause that provides that City reserves the right to cancel the Agreement, or any extension, without cause, with a thirty day (30) written notice, or immediately with cause.

6. EVALUATION AND SELECTION CRITERIA
The City will review all submitted proposals in accordance with the established evaluation criteria.

Following the initial evaluation, the City may conduct interviews with the highest-ranked Proposers, if deemed necessary. The City reserves the right to award the contract not solely based on cost, but to the Proposer(s) whose proposal offers the best overall value, aligns most closely with the service specifications, and best serves the City’s interests. All Proposers will be notified in writing or by email regarding the outcome of the selection process and their status.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 5 of 29

Proposals will be evaluated based on the following criteria:

35% Demonstrated capacity to fulfill scope of work
20% Established Behavioral Health Protocol and Experience 20% Pricing
15% Qualifications and Experience of Entity and Key Personnel 10% References

Local Purchasing Preference: In accordance with Section 12 -28.040 of the Salinas Municipal Code, contractors that qualify as a local business enterprise shall receive a credit of five percent of the total points. If applicable, Proposers should fill out and submit Declaration of Local Business Enterprise form (refer to Attachment 3).

The City will adhere to the following procedures in evaluating proposals. An Evaluation/Selection Committee (Committee), which may include members of the City's staff and possibly one or more outside experts, will screen and review all proposals according to the weighted criteria set forth above.

While price is one basic factor for award, it is not the sole consideration.

Recommendation for award is contingent upon the successful negotiation of final contract terms.

Negotiations shall be confidential and not subject to disclosure to competing Proposers unless an agreement is reached. If contract negotiations cannot be concluded successfully within a time period determined by the City, the City may terminate negotiations and commence negotiations with the next highest scoring Proposer or withdraw the RFP.

7. SCOPE OF WORK

SECURITY GUARD GENERAL SERVICES
The scope of work includes, but is not limited to the following:

1. Guards shall perform foot, bike, vehicle1 patrols of City facilities unless otherwise arranged.

2. Guards shall observe and report accidents, emergencies, property issues, or potential threats to City Staff immediately and have the ability to contact the Salinas Police Department as the situation warrants.

3. Guards shall observe and report any damage to property or suspicious activity to City Staff or designated representatives.

4. Guards are required to perform an annual site assessment report.

5. Guards shall provide fire watch as needed.

6. Guards shall respond to all activated panic and specific code alarms at each location.

7. Each Facility will develop a comprehensive set of Patrol Orders to be followed by the Guards.

1 Mileage driven by patrol vehicle per month may vary depending on the site.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 6 of 29

HOURS
Contractor shall define overtime pay start time and end time. Contractor shall provide rates for differentials swing shift and graveyard.

CONTRACTOR REQUIREMENTS

1. Contractor(s) shall provide City departments, which are contracting for services, with the following:
• Training programs for staff on an annual basis;
• Site assessment reports annually;
• Daily updated activity/incident log reports to the requesting department’s designated contact.

2. Services shall be provided in accordance with sections 11105, 12002, and 12033 of the California Penal Code and Sections 7583.5 and 7583.12 of the California Business and Professions Code.

3. Contractor(s) security guards shall be capable of performing duties independently, receiving general operational direction, and should not require ongoing supervision by the City.

4. Contractor will be responsible for providing its Guards with any equipment necessary to complete their assigned duties, including personal protective equipment (PPE).

5. Contractors are responsible for planning for the required Rest and Meal periods.

6. Contractor(s) security guards providing services under this Agreement are subject to federal and state laws, regulations, and rules pertaining to the confidentiality of information contained in department files and automated records. Contractor(s) employees will receive training about confidentiality and any conflicts of interest matters, the training will be conducted by the City.

7. Breach of confidentiality and/or conflict of interest laws, regulations, or rules by an assigned security guard shall be grounds for replacement of that guard, who may also face possible civil and/or criminal action.

8. City has the right to decline the services of a security guard at any time without cause and, Contractor(s) shall replace the guard in question within two (2) hours of receiving an oral request from the City.

9. City agrees to provide a follow up written record stating the cause leading to the refusal of the security guard service within fifteen (15) days from the time of an incident.

10. Contractor(s) agree(s) that the replacement guard shall complete the unfinished assignment shift of the original assigned guard at no additional cost to the City.

11. As requested by City, Contractor(s) shall require its key security guards and management staff to attend security and safety related meetings conducted by City at no additional cost to the City.

12. Contractor(s) agrees to provide the City with a primary contact person for the general administration of this Agreement.

13. The primary contact person should be available by phone to respond to service request calls made by the City on a 24/7, 365 days per year basis.

14. Contractor(s) shall ensure that security guards present a neat & business- like appearance.

15. The security guards must conduct themselves with courteous professionalism at all times.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 7 of 29

16. If any license, permit, or approval is necessary from any agency whatsoever for the service or work to be performed pursuant to the terms and conditions of this Agreement, Contractor(s )will obtain such approvals at its own expense prior to commencement of said work or service under this Agreement.

17. Upon receiving Notice of Award, Contractor(s) shall provide the City with a list of security guards who will be assigned to provide services.

18. For each security guard listed, Contractor(s) shall provide the following information:
• Security guard’s full name;
• Security guard’s date of birth;
• CA State Bureau of Security Guard license number;
• Security guard’s home address, both current address and addresses from the previous three (3) years.

19. Contractor(s) shall update the City list of security guards as personnel changes are made.

8. PROPOSAL PACKAGE REQUIREMENTS
Proposal should include the information as requested and as applicable to the requested services. The proposal package shall be organized as per the table below; headings and section numbering used in the proposal package shall be the same as those identified in the table. Proposal packages shall include at a minimum, but not limited to, the following information in the format indicated:

Section 1 Cover Letter (including contact info)
Signature Page – Refer to Attachment 2
Receipt of Signed Addenda (if any)
Section 2 Pre-Qualification / Licensing Requirements
Section 3 Project Experience and References
Section 4 Statement to Service Entire City
Section 5 Statement to Service Salinas City Center District Section 6 Pricing Schedule – Refer to Attachment 1
Section 7 Appendix

Section 1.

Cover Letter: All proposals must be accompanied by a cover letter not exceeding one page and should provide firm information and contact information as follows:

Contact Info: The name, address, telephone number, and fax number of Contractor’s primary contact person during the solicitation process through potential contract award.

Firm Info: Description of the type of organization (e.g. corporation, partnership, including joint venture teams and subcontractors) and how many years it has been in existence.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 8 of 29

Signed Signature Page/Verification of Licensure and Signed Addenda (if any addenda were released for this solicitation): Proposal packages submitted without the signed Signature Page/Verification of Licensure ( Attachment 2 ) will be deemed non -responsive. All signatures must be manual and in BLUE ink. All prices and notations must be typed or written in BLUE ink. Errors may be crossed out and corrections printed in ink or typed adjacent and must be initialed in BLUE ink by the person signing the proposal.

Section 2.

Pre-Qualifications/Licensing: Contractor must acknowledge in writing that it meets all of the pre - qualifications and licensing requirements as set forth in Section 3 of this RFP.

Section 3.

Key Staff Persons: Proposer shall identify key staff and their qualifications and experience proposed for the service identified herein.

Experience and Reference: Contractor shall describe at least three (3) similar projects for which it provided services similar to the scope of work described herein. Please include phone number and email address if possible as the City will conduct reference checks using this information.

Violations: Contractor shall submit copies of all notices of violations, corrective action notices, enforcement actions or orders, warning notices, writings, or other forms of permit violation/non- compliance documentation (such as OSHA) received by Contractor, or any business organization owned or operated by the Contractor which are its parent company and/or subsidiaries, from any public agency during 2015 up to and including the present day.

Section 4.

Statement to Service Entire City: Include a statement acknowledging your company is able to provide services to throughout the City at various facilities including: the Airport, Permit Center, Libraries, Recreational Facilities, Parking Garages, Parking Lots, Train Station, Sherwood Hall, and other City- owned Facilities.

If certain locations are to include added fees for travel time, please indicate as such in this statement.

Section 5.

Statement to Service Salinas City Center and Eligible Non -Profit Groups : Include a statement acknowledging your company is able to provide services to the Salinas City Center District (Downtown District) and other eligible non -profit groups based in the City of Salinas and that the same terms, conditions, and rates will be extended to those groups.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 9 of 29

Section 6.

Attachment 1 – Pricing Schedule (Attachment 1): this form must be submitted with proposal.

Local Business Declaration (If applicable): If Proposer meets the Local Business requirements as set forth in Salinas Municipal Code Section 12-28.050 and would like to have 5% local preference applied to its proposal, it shall be required to complete and submit the Local Business Declaration Form attached hereto as Attachment 3.

Section 7.

Appendices: Contractor may Include here any additional information that it believes to be applicable to this proposal package.

Additional Requirements
To be considered “responsive,” submitted proposal packages shall adhere to the following:

 Original proposal shall be submitted in response to this solicitation. Shall include a cover indicating the company name submitting, and reference to “RFP Citywide Service Agreements to Provide Uniformed Security Guard Services”.
 Proposal packages shall be prepared on 8-1/2” x 11” paper, preferably duplex printed bound with front and back covers. Fold out charts, tables, spreadsheets, brochures, pamphlets, and other pertinent information or work product examples may be included as Appendices.  Reproductions of the City of Salinas Seal shall not be used in any documents submitted in response to this solicitation.
 Contractor shall not use white -out or a similar correction product to make late changes to their proposal package but may instead line out and initial in BLUE ink any item which no longer is applicable or accurate.
 To validate your proposal package, submit the Signature Page/Verification of Licensure (contained herein as Attachment 2) with your proposal. Proposal packages submitted without that page will be deemed non -responsive. Proposal signature must be manual, in BLUE ink, and included with the original copy of the proposal. Photocopies of the Signature Page may be inserted into the remaining proposal copies. All prices and notations must be typed or written in BLUE ink in the original proposal copy as well. Errors may be crossed out and corrections printed in BLUE ink or typed adjacent, and must be initialed in BLUE ink by the person signing the proposal.  CONFIDENTIAL OR PROPRIETARY CONTENT: Any page of the proposal package that is deemed by Proposer to be a trade secret by the Proposer shall be clearly marked “CONFIDENTIAL INFORMATION” or “PROPRIETARY INFORMATION” at the top of the page.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 10 of 29

9. PRICING
Proposer(s) will attach and submit a completed Attachment 1- Price Schedule for the provision of services as outlined within this RFP.

Prices stated in Attachment 1- Price Schedule shall be effective from the date the proposal is submitted to the day the contract agreement is awarded and through the initial term of the agreement.

Prior to the start of each project, the City department and Contractor(s) will mutually agree upon the budget for the project. City will provide a defined scope. Pricing may be based upon an hourly rate or by the project, based upon the direction of the user department. Prices quoted for work assignments must remain in effect for a minimum of thirty (30) days.

Invoices submitted for payment will clearly itemize but is not limited to the following:
• the City Department receiving services;
• the purchase order number under which the invoice is to be charged; • the services provided;
• the dates of services.

Proposals shall include any early discounts and/or incentives offered.

10. INQUIRIES
All requests for clarification regarding this Request for Proposals (RFP) must be submitted in writing through the Q&A tab on the PlanetBids website. Questions must be received no later than 3:00 p.m.

Pacific Standard Time (PST) on Wednesday, May 28, 2025. All questions will be answered collectively via an addendum posted to the PlanetBids project page. Final responses will be issued no later than Friday, May 30, 2025.

From the date that this RFP is issued until a contractor is selected and the selection is announced, firms or public entities are not allowed to communicate outside the process set forth in this RFP with any City employee other than the contracting officer listed as a contact on PlanetBids. The City reserves the right to reject any proposal for violation of this provision. No questions other than written will be accepted, and no response other than written will be binding upon the City.

11. DISCRETION AND LIABILITY WAIVER
The City reserves the right to reject all proposals or to request and obtain from one or more Contractors submitting proposals, supplementary information as may be necessary for City staff to analyze the proposals pursuant to the consultant selection criteria.

The City is not liable for costs incurred by Contractors for the cost of the proposal. Contractors submitting a response to this RFP waive all rights to protest or seek any legal remedies whatsoever regarding any aspect of this RFP. All proposals shall be binding for a period of 90 days after the proposal due date. The City also reserves the following rights and options with respect to this RFP:

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 11 of 29

• To re-issue this RFP with or without change or modification, at any time prior to the City’s execution of an Agreement pursuant to this RFP;
• To cancel this RFP with or without issuing another request for proposals; • To supplement, amend, substitute or otherwise modify this RFP at any time prior to the City’s execution of an agreement pursuant to this RFP;
• To waive informality, defect, non- responsiveness and/or deviation from this RFP that is not, in the City’s sole judgment, material to the proposal;
• To request modification of some or all of the proposals following evaluation by the City; • To request clarifications of any proposals;
• To negotiate simultaneously, or otherwise, with one or more Proposer; and • To discontinue and resume negotiations with one or more Proposer

12. PIGGY BACK CLAUSE
Contractor shall indicate in its proposal, Section 6, if it agrees to extend the same prices, terms and conditions of their proposal to other public agencies that have delivery locations within the State of California limits.

Contractor’s response to this question will not be considered in award of the agreement resulting from this solicitation. If and when Contractor extends the prices, terms and conditions of their proposal to other public agencies, any resulting agreement shall be between contractor and the other public agencies and City shall bear no responsibility or liability for any agreements between Contractor and the other public agencies.

13. SAMPLE AGREEMENT
For the Contractor’s information, a sample copy of the standard Services Agreement is included to this RFP as Appendix A. By submitting a proposal, the Contractor agrees to be bound by the requirements under this Agreement.

14. COMPENSATION & PAYMENT
It is mutually understood and agreed by both parties that Contractor shall be compensated in accordance with the pricing sheet attached hereto. Prices shall remain firm for the initial term of the agreement and, thereafter, may be adjusted annually as provided in this paragraph. City does not guarantee any minimum or maximum amount of dollars to be spent under this agreement.

Negotiations for rate changes shall be commenced, by Contractor, a minimum of ninety days (90) pri
or to the expiration of the initial term. Any discount offered must allow for payment after receipt and acceptance of services, material or equipment and correct invoice, whichever is later. In no case will a discount be considered that requires payment in less than 30 days. Contractor shall levy no additional fees or surcharges of any kind during the term of the agreement without first obtaining approval from City in writing.

Pricing shall be inclusive of all applicable taxes.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 12 of 29

15. LIST OF FACILITIES
The following locations typically require guard services on an ongoing basis and may be subject to change.

Services at additional locations may be requested through the term of the agreement.

Location: City Parking Lots 1, 2, 3, 5, 8, 10, 12, 15, 16, 17, 18, & Intermodal Transit Center (I.T.C.)
Address: Multiple
Service Hours: 8:00am – 4:00pm
Typical Services
Requested:

Random Patrols 8:00am – 4:00pm with a maximum of four (4) patrols a day

Location: Monterey Street
Address: 20 E Market Street
Service Hours: 24 hours a day, seven days a week
Typical Services
Requested:

Random Patrols once an hour every day, seven days a week. Continuous Patrol 9:00pm-2:00am Friday-Saturday, Secure/lockdown and open facility seven (7) days a week

Location: Salinas Street Garage (Permit Center)
Address: 342 Salinas Street
Service Hours: 6:00pm-7:00am
Typical Services
Requested:

Random Patrols once an hour

Location: Salinas Permit Center
Address: 65 West Alisal
Service Hours: Monday – Friday 7:30am – 6:00pm
Typical Services
Requested:

Provide continuous patrol coverage in the morning (7:30 am-9:00am) and evening (5:00pm – 6:00pm) hours, Monday through Friday.

Conduct three (3) randomized patrols between the hours of 9:00 a.m. and 4:30 pm, Monday- Friday. Patrol coverage must include the abutting Salinas Street Parking Garage.

Location: Salinas City Hall
Address: 200 Lincoln Avenue
Service Hours: Monday - Friday 9am-4pm
Typical Services
Requested:

Period Patrols between 9:00am – 4:00pm around City Hall and Former Police Department

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 13 of 29

Location: Steinbeck Library
Address: 350 Lincoln Ave
Service Hours: Monday 10am-6pm
Tuesday 12pm-8:15pm
Wednesday 11:30am-6pm
Thursday 12pm-8:15pm
Friday & Saturday 10am-6pm
Sunday 1pm-6pm
Typical Services
Requested:

Continuous Patrol throughout operating hours. Current request: 75% of patrol time is devoted to interior/in-facility patrols, 25% of patrol time is devoted to exterior and parking lot patrol

Location: Salinas Recreation Center
Address: 320 Lincoln Ave
Service Hours: 8:00am – 8:00pm Monday - Friday
Typical Services
Requested:

Outside Random Patrols once an hour.

Location: City Maintenance Services Yard
Address: 426 Work Street
Service Hours: Sunset - Sunrise
Typical Services
Requested:

Two (2) Random Patrols per Night.

Location: Salinas Municipal Airport
Address: 30 Mortensen Street
Service Hours: Sunset - Sunrise
Typical Services
Requested:

Three (3) Random Patrols per Night.

Location: Sherwood Hall Community Center
Address: 940 N. Main Street
Service Hours: Event Security Services, various
Typical Services
Requested:

Services requested will vary and are event dependent. Specific work detail will be specified on individual event basis. Typical events include music performances and recitals, seminars, conferences, graduations, community meetings, etc.

Location: Salinas City Center Improvement Association
Address: Downtown Area
Service Hours: Monday - Thursday 6am-8pm
Friday & Saturday 6am – 12am
Typical Services
Requested:

Continuous Patrol of the improvement district by two (2) security officers throughout operating hours

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 14 of 29

ATTACHMENT 1 – PRICE SCHEDULE
The following rate shall be provided:

Supervisor Unarmed Cost
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Security Officer
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Patrol Rate (including vehicle)
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Alarm Response
Response Rate$ /hr.

COMMUNICATION EQUIPMENT
2-Way Radio Rate $ /hr.

Cellular Phone Rate $ /hr.

Cell/Radio $ /hr.

~End of Attachment 1~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 15 of 29

ATTACHMENT 2 – SIGNATURE PAGE / VERIFICATION

OF LICENSURE
By submission of a proposal, Proposer attests to having possession of a valid private patrol operator license issued by the State of California. Such license authorizes a Contractor to contract to perform the type of work required by the specifications. Should the Contractor fail to provide below the number of Contractor’s State of California License and City of Salinas, Patrol Service Permit, the City may reject this proposal.

Proposer:

BY:

TITLE:

MAILING ADDRESS:

(City) (State) (Zip)
TELEPHONE NUMBER:

STATE OF CALIFORNIA LICENSE NO.:
(Private Patrol Operators License)

CITY OF SALINAS PRIVATE-PATROL OPERATOR REGISTRATION
CARD NO.:

PROPOSER’S Signature Date

~End of Attachment 2~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 16 of 29

ATTACHMENT 3 – LOCAL VENDOR DECLARATION
FORM

~End of Attachment 3~

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 17 of 29

APPENDIX A: SAMPLE AGREEMENT

AGREEMENT

FOR PROFESSIONAL SERVICES

BETWEEN

THE CITY OF SALINAS AND
[CONSULTANT’S LEGAL NAME *]

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 18 of 29

AGREEMENT FOR PROFESSIONAL SERVICES BETWEEN
THE CITY OF SALINAS AND __________________

This Agreement for Professional Services (the “Agreement” and/or “Contract”) is made and entered into this ____ day of ______, 20_, between the City of Salinas, a California Charter city and municipal corporation (hereinafter “City”), and [__________________], a [California corporation/limited liability company/dba/etc.] (hereinafter “Consultant”).

RECITALS

WHEREAS, Consultant represents that he, she, or it is specially trained, experienced, and competent to perform the special services which will be required by this Agreement; and

WHEREAS, Consultant is willing to render such professional services, as hereinafter defined, on the following terms and conditions.

NOW, THEREFORE, City and Consultant agree as follows:

TERMS

1. Scope of Service. The project contemplated and the scope of Consultant’s services are described in Exhibit B, attached hereto and incorporated herein by reference.

2. Term; Completion Schedule. This Agreement shall commence on [XXX], and shall terminate on [XXX], unless extended in writing by either party upon (30) days written notice.

This Agreement may be extended only upon mutual written consent of the parties, and may be terminated only pursuant to the terms of this Agreement.

3. Compensation. City hereby agrees to pay Consultant for services rendered the City pursuant to this Agreement on a time and materials basis according to the rates of compensation of [or as set forth in Exhibit B] . The total amount of compensation to be paid under this Agreement shall not exceed [__________________dollars ($__________________)].

4. Billing. Consultant shall submit to City an itemized invoice, prepared in a form satisfactory to City, describing its services and costs for the period covered by the invoice.

Except as specifically authorized by City, Consultant shall not bill City for duplicate services performed by more than one person. Consultant’s bills shall include the following information to which such services cost or pertain:

(A) A brief description of services performed;
(B) The date the services were performed;
(C) The number of hours spent and by whom;
(D) A brief description of any costs incurred; and
(E) The Consultant’s signature.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 19 of 29

Any such invoices shall be in full accord with any and all applicable provisions of this Agreement.

City shall make payment on each such invoice within thirty (30) days of receipt; provided, however, that if Consultant submits an invoice which is incorrect, incomplete, or not in accord with the provisions of this Agreement, City shall not be obligated to process any payment to Consultant until thirty (30) days after a correct and complying invoice has been submitted by Consultant. The City shall process undisputed portion immediately.

5. Meet & Confer. Consultant agrees to meet and confer with City or its agents or employees with regard to services as set forth herein as may be required by the City to ensure timely and adequate performance of the Agreement.

6. Additional Copies . If City requires additional copies of reports, or any other material which Consultant is required to furnish as part of the services under this Agreement, Consultant shall provide such additional copies as are requested, and City shall compensate Consultant for the actual costs related to the production of such copies by Consultant.

7. Responsibility of Consultant. By executing this Agreement, Consultant agrees that the services to be provided and work to be performed under this Agreement shall be performed in a fully competent manner. By executing this Agreement, Consultant further agrees and represents to City that the Consultant possesses, or shall arrange to secure from others, all of the necessary professional capabilities, experience, resources, and facilities necessary to provide the City the services contemplated under this Agreement and that City relies upon the professional skills of Consultant to do and perform Consultant’s work. Consultant further agrees and represents that Consultant shall follow the current, generally accepted practices in this area to the profession to make findings, render opinions, prepare factual presentations, and provide professional advice and recommendations regarding the projects for which the services are rendered under this Agreement.

8. Responsibility of City. To the extent appropriate to the projects to be completed by Consultant pursuant to this Agreement, City shall:

(A) Assist Consultant by placing at its disposal all available information pertinent to the projects, including but not limited to, previous reports and any other data relative to the projects. Nothing contained herein shall obligate City to incur any expense in connection with completion of studies or acquisition of information not otherwise in the possession of City.

(B) Examine all studies, reports, sketches, drawings, specifications, proposals, and other documents presented by Consultant, and render verbally or in writing as may be appropriate, decisions pertaining thereto within a reasonable time so as not to delay the services of Consultant.

(C) City Manager, or his designee, shall act as City’s representative with respect to the work to be performed under this Agreement. Such person shall have the complete authority

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 20 of 29

to transmit instructions, receive information, interpret and define City’s policies and decisions with respect to materials, equipment, elements, and systems pertinent to Consultant’s services.

City may unilaterally change its representative upon notice to the Consultant.

(D) Give prompt written notice to Consultant whenever City observes or otherwise becomes aware of any defect in a project.

9. Acceptance of Work Not a Release. Acceptance by the City of the work to be performed under this Agreement does not operate as a release of Consultant from professional responsibility for the work performed.

10. Indemnification and Hold Harmless.

Consultant shall defend, indemnify, and hold harmless the City and its officers, officials, employees, volunteers, and agents from and against any and all liability, loss, damage, expense, costs (including without limitation costs and fees of litigation) of every nature arising out of or in connection with Consultant’s performance of work hereunder, including the performance of work of any of Consultant’s subcontractors or agents, or Consultant’s failure to comply with any of its obligations contained in the agreement, except such loss or damage which was caused by the sole negligence or willful misconduct of the City.

11. Insurance. Consultant shall procure and maintain for the duration of this Agreement insurance meeting the requirements specified in Exhibit A hereto.

12. Access to Records. Consultant shall maintain all preparatory books, records, documents, accounting ledgers, and similar materials including but not limited to calculation and survey notes relating to work performed for the City under this Agreement on file for at least three (3) years following the date of final payment to Consultant by City. Any duly authorized representative(s) of City shall have access to such records for the purpose of inspection, audit, and copying at reasonable times during Consultant’s usual and customary business hours.

Consultant shall provide proper facilities to City’s representative(s) for such access and inspection.

13. Non-Assignability. It is recognized by the parties hereto that a substantial inducement to City for entering into this Agreement was, and is, the professional reputation and competence of Consultant. This Agreement is personal to Consultant and shall not be assigned by it without express written approval of the City.

14. Changes to Scope of Work. City may at any time, and upon a minimum of ten (10) days written notice, seek to modify the scope of services to be provided for any project to be completed under this Agreement. Consultant shall, upon receipt of said notice, determine the impact on both time and compensation of such change in scope and notify City in writing. Upon agreement between City and Consultant as to the extent of said impacts to time and compensation, an amendment to this Agreement shall be prepared describing such changes.

Execution of the amendment by City and Consultant shall constitute the Consultant’s notice to proceed with the changed scope.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 21 of 29

15. Ownership of Documents. Title to all final documents, including drawings, specifications, data, reports, summaries, correspondence, photographs, computer software (if purchased on the City’s behalf), video and audio tapes, software output, and any other materials with respect to work performed under this Agreement shall vest with City at such time as City has compensated Consultant, as provided herein, for the services rendered by Consultant in connection with which they were prepared. City agrees to hold harmless and indemnify the Consultant against all damages, claims, lawsuits, and losses of any kind including defense costs arising out of any use of said documents, drawings, and/or specifications on any other project without written authorization of the Consultant.

16. Termination.

(A) City shall have the authority to terminate this Agreement, upon ten days written notice to Consultant, as follows:

(1) If in the City’s opinion the conduct of the Consultant is such that the interest of the City may be impaired or prejudiced, or

(2) For any reason whatsoever.

(B) Upon termination, Consultant shall be entitled to payment of such amount as fairly compensates Consultant for all work satisfactorily performed up to the date of termination based upon the Consultant’s rates shown in Exhibit B and/or Section 3 of this Agreement, except that:

(1) In the event of termination by the City for Consultant’s default, City shall deduct from the amount due Consultant the total amount of additional expenses incurred by City as a result of such default. Such deduction from amounts due Consultant are made to compensate City for its actual additional costs incurred in securing satisfactory performance of the terms of this Agreement, including but not limited to, costs of engaging another consultant(s) for such purposes. In the event that such additional expenses shall exceed amounts otherwise due and payable to Consultant hereunder, Consultant shall pay City the full amount of such expense.

(C) In the event that this Agreement is terminated by City for any reason, Consultant shall:

(1) Upon receipt of written notice of such termination promptly cease all services on this project, unless otherwise directed by City; and

(2) Deliver to City all documents, data, reports, summaries, correspondence, photographs, computer software output, video and audio tapes, and any other materials provided to Consultant or prepared by or for Consultant or the City in connection with this Agreement. Such material is to be delivered to City in completed form; however, notwithstanding the provisions of Section 15 herein, City may condition payment for

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 22 of 29

services rendered to the date of termination upon Consultant’s delivery to the City of such material.

(D) In the event that this Agreement is terminated by City for any reason, City is hereby expressly permitted to assume the projects and complete them by any means, including but not limited to, an agreement with another party.

(E) The rights and remedy of the City and Consultant provided under this Section are not exclusive and are in addition to any other rights and remedies provided by law or appearing in any other section of this Agreement.

17. Compliance with Laws, Rules, and Regulations . Services performed by Consultant pursuant to this Agreement shall be performed in accordance and full compliance with all applicable federal, state, and City laws and any rules or regulations promulgated thereunder.

18. Exhibits Incorporated. All exhibits referred to in this Agreement and attached to it are hereby incorporated in it by this reference. In the event there is a conflict between any of the terms of this Agreement and any of the terms of any exhibit to the Agreement, the terms of the Agreement shall control the respective duties and liabilities of the parties.

19. Independent Contractor. It is expressly understood and agreed by both parties that Consultant, while engaged in carrying out and complying with any of the terms and conditions of this Agreement, is an independent contractor and not an employee of the City. Consultant expressly warrants not to represent, at any time or in any manner, that Consultant is an employee or servant of the City.

20. Integration and Entire Agreement. This Agreement represents the entire understanding of City and Consultant as to those matters contained herein. No prior oral or written understanding shall be of any force or effect with respect to those matters contained herein. This Agreement may not be modified or altered except by amendment in writing signed by both parties.

21. Jurisdiction and Venue. This Agreement shall be governed by and construed in accordance with the laws of the State of California, County of Monterey, and City of Salinas.

Jurisdiction of litigation arising from this Agreement shall be in the State of California, in the County of Monterey or in the appropriate federal court with jurisdiction over the matter.

22. Severability. If any part of this Agreement is found to be in conflict with applicable laws, such part shall be inoperative, null and void insofar as it is in conflict with said laws, but the remainder of the Agreement shall continue to be in full force and effect.

23. Notices.

(A) Written notices to the City hereunder shall, until further notice by City, be addressed to:

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 23 of 29

City Manager
City of Salinas
200 Lincoln Avenue
Salinas, California 93901

With a copy to:

City Attorney
City of Salinas
200 Lincoln Avenue
Salinas, California 93901

(B) Written notices to the Consultant shall, until further notice by the Consultant, be addressed to:

[Contact Information for Consultant including Title, Address, Email, and Phone #]

(C) The execution of any such notices by the City Manager shall be effective as to Consultant as if it were by resolution or order of the City Council, and Consultant shall not question the authority of the City Manager to execute any such notice.

(D) All such notices shall either be delivered personally to the other party’s designee named above, or shall be deposited in the United States Mail, properly addressed as aforesaid, postage fully prepaid, and shall be effective the day following such deposit in the mail.

24. Nondiscrimination. During the performance of this Agreement, Consultant shall not discriminate against any employee or applicant for employment because of race, color, religion, ancestry, creed, sex, national origin, familial status, sexual orientation, age (over 40 years) or disability. Consultant shall take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, color, religion, ancestry, creed, sex, national origin, familial status, sexual orientation, age (over 40 years) or disability.

25. Conflict of Interest. Consultant warrants and declares that it presently has no interest, and shall not acquire any interest, direct or indirect, financial or otherwise, in any manner or degree which will render the services required under the provisions of this Agreement a violation of any applicable local, state or federal law. Consultant further declares that, in the performance of this Agreement, no subcontractor or person having such an interest shall be employed. In the event that any conflict of interest should nevertheless hereinafter arise, Consultant shall promptly notify City of the existence of such conflict of interest so that City may determine whether to terminate this Agreement. Consultant further warrants its compliance with the Political Reform Act (Government Code section 81000 et seq.) and Salinas City Code Chapter 2A that apply to Consultant as the result of Consultant’s performance of the work or services pursuant to the terms of this Agreement.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 24 of 29

26. Headings. The section headings appearing herein shall not be deemed to govern, limit, modify, or in any manner affect the scope, meaning or intent of the provisions of this Agreement.

27. Attorneys’ Fees. In case suit shall be brought to interpret or to enforce this Agreement, or because of the breach of any other covenant or provision herein contained, the prevailing party in such action shall be entitled to recover their reasonable attorneys’ fees in addition to such costs as may be allowed by the Court. City’s attorneys’ fees, if awarded, shall be calculated at the market rate.

28. Non-Exclusive Agreement. This Agreement is non- exclusive and both City and Consultant expressly reserves the right to contract with other entities for the same or similar services.

29. Rights and Obligations Under Agreement. By entering into this Agreement, the parties do not intend to create any obligations express or implied other than those set out herein; further, this Agreement shall not create any rights in any party not a signatory hereto.

30. Licenses. If a license of any kind, which term is intended to include evidence of registration, is required of Consultant, its representatives, agents or subcontractors by federal, state or local law, Consultant warrants that such license has been obtained, is valid and in good standing, and that any applicable bond posted in accordance with applicable laws and regulations.

31. Counterparts. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original, but all of which together shall constitute a single agreement.

32. Legal Representation. Each party affirms that it has been represented, if it so chose, by legal counsel of its own choosing regarding the preparation and the negotiation of this Agreement and the matters and claims set forth herein, and that each of them has read this Agreement and is fully aware of its contents and its legal effect. Neither party is relying on any statement of the other party outside the terms set forth in this Agreement as an inducement to enter into this Agreement.

33. Joint Representation. The language of all parts of this Agreement shall in all cases be construed as a whole, according to its fair meaning, and not strictly for or against any party. No presumptions or rules of interpretation based upon the identity of the party preparing or drafting the Agreement, or any part thereof, shall be applicable or invoked.

34. Warranty of Authority. Each party represents and warrants that it has the right, power, and authority to enter into this Agreement. Each party further represents and warrants that it has given any and all notices, and obtained any and all consents, powers, and authorities, necessary to permit it, and the persons entering into this Agreement for it, to enter into this Agreement.

35. No Waiver of Rights. Waiver of a breach or default under this Agreement shall not constitute a continuing waiver or a waiver of a subsequent breach of the same or any other provision of this Agreement. The failure to provide notice of any breach of this Agreement or

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 25 of 29

failure to comply with any of the terms of this Agreement shall not constitute a waiver thereof.

Failure on the part of either party to enforce any provision of this Agreement shall not be construed as a waiver of the right to compel enforcement of such provision or any other provision. A waiver by the City of any one or more of the conditions of performance under this Agreement shall not be construed as waiver(s) of any other condition of performance under this Agreement.

IN WITNESS WHEREOF, the parties hereto have made and executed this Agreement on the date first written above.

CITY OF SALINAS

____________________________
René Mendez, City Manager

APPROVED AS TO FORM:

_________________________
□ Christopher A. Callihan, City Attorney, or
□ Rhonda Combs, Assistant City Attorney

CONSULTANT

___________________________________

By (Printed Name): ___________________
Its (Title): ___________________________

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 26 of 29

Exhibit A- Insurance Requirements

Insurance Requirements
Consultant shall procure and maintain for the duration of the Agreement insurance against claims for injuries to persons or damage to property which may arise from or in connection with the performance of the work hereunder and the results of that work by the Consultant, his agents, representatives, employees, or subcontractors. With respect to General Liability and Professional Liability, coverage should be maintained for a minimum of five (5) years after Agreement completion.

MINIMUM SCOPE AND LIMIT OF INSURANCE
Coverage shall be at least as broad as:
(A) Commercial General Liability (“CGL”): Insurance Services Office Form (“ISO”) CG 00 01 covering CGL on an occurrence basis, including products and completed operations, property damage, bodily injury, and personal & advertising injury with limits no less than $1,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit. (B) Automobile Liability: ISO Form CA 0001 covering any auto, or if Consultant has no owned autos, hired and non- owned, with limits no less than $1,000,000 per accident for bodily injury and property damage.
(C) Workers’ Compensation insurance as required by the State of California, with Statutory Limits, and Employer’s Liability Insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.
(D) Professional Liability (also known as Errors and Omissions) insurance appropriate to the work being performed, with limits no less than $1,000,000 per occurrence or claim, $2,000,000 aggregate per policy period of one year.

If the Consultant maintains broader coverage and/or higher limits than the minimums shown above, the City of Salinas requires and shall be entitled to the broader coverage and/or higher limits maintained by the Consultant. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the City.

OTHER INSURANCE PROVISIONS
The insurance policies are to contain, or be endorsed to contain, the following provisions:

Additional Insured Status
The City of Salinas, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Consultant including materials, parts, or equipment furnished in connection with such work or operations. General liability coverage can be provided in the form of an endorsement to the Consultant’s insurance (at least as broad as ISO Form CG 20 10, CG 11 85, or both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 forms if later revisions used).

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 27 of 29

Primary Coverage
For any claims related to this Agreement or the project described within this Agreement, the Consultant’s insurance coverage shall be primary coverage at least as broad as ISO Form CG 20 01 04 13 as respects the City, its officers, officials, employees, and volunteers. Any insurance or self-insurance maintained by the City, its officers, officials, employees, or volunteers shall be excess of the Consultant’s insurance and shall not contribute with it.

Notice of Cancellation
Each insurance policy required above shall provide that coverage shall not be canceled, except with notice to the City.

Waiver of Subrogation
Consultant hereby grants to City a waiver of any right to subrogation which any insurer of said Consultant may acquire against the City by virtue of the payment of any loss under such insurance. Consultant agrees to obtain any endorsement that may be necessary to affect this waiver of subrogation, but this provision applies regardless of whether or not the City has received a waiver of subrogation endorsement from the insurer.

The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of the City of Salinas for all work performed by the Consultant, its employees, agents, and subcontractors.

Self-Insured Retentions
Self-insured retentions must be declared by Consultant to and approved by the City. At the option of the City, Consultant shall provide coverage to reduce or eliminate such self-insured retentions as respects the City, its officers, officials, employees, and volunteers; or the consultant shall provide evidence satisfactory to the City guaranteeing payment of losses and related investigations, claim administrations, and defense expenses. The policy language shall provide, or be endorsed to provide, that the self-insured retention may be satisfied by either the named insured or City.

Acceptability of Insurers
Insurance is to be placed with insurers with a current A.M. Best’s rating of no less than A:VII, unless otherwise acceptable to the City.

Claims Made Policies
If any of the required policies provide coverage on a claims-made basis:

1. The Retroactive Date must be shown and must be before the date of this Agreement or the beginning of Agreement work.

2. Insurance must be maintained and evidence of insurance must be provided for at least five (5) years after completion of the Agreement of work.

3. If coverage is canceled or non -renewed, and not replaced with another claims -made policy form with a Retroactive Date prior to the Agreement effective date, the Consultant must purchase “extended reporting” coverage for a minimum of five (5) years after completion of Agreement work.

4. A copy of the claims reporting requirements must be submitted to the City for review.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 28 of 29

Verification of Coverage
Consultant shall furnish the City with original certificates and amendatory endorsements or copies of the applicable insurance language effecting coverage required by this Agreement. All certificates and endorsements are to be received and approved by the City before work commences. However, failure to obtain the required documents prior to the work beginning shall not waive the Consultant’s obligation to provide them. The City reserves the right to require complete, certified copies of all required insurance policies, including endorsements required by these specifications, at any time.

Subcontractors
Consultant shall require and verify that all sub-consultants and/or subcontractors maintain insurance meeting all the requirements stated herein, and Consultant shall ensure that Entity is an additional insured on insurance required from such sub-consultants and/or subcontractors.

Special Risks or Circumstances
City reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other special circumstances.

Maintenance of Insurance
Maintenance of insurance by Consultant as specified shall in no way be interpreted as relieving Consultant of its indemnification obligations or any responsibility whatsoever and the Consultant may carry, at its own expense, such additional insurance as it deems necessary.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 29 of 29

Exhibit B- Scope of Service

[Scope of Service; Compensation]

~End of Appendix A~
RFP:

Uniform Security Guard Services
Respo
nding with Precision and Innovation for
C
ity of
S
alinas
Stra
tegic Excellence Unveiled

ATTACHMENT C
(_itiguard
™
Response to:

RFP: CITYWIDE SERVICE AGREEMENTS

TO PROVIDE UNIFORMED SECURITY GUARD SERVICES
June 5, 2025
Cristina Gonzalez
City Hall
Public Works Department
200 Lincoln Avenue
Salinas, CA 93901
Dear Ms. Gonzalez,
On behalf of Citiguard, Inc., I want to express our sincere appreciation for the opportunity to submit our proposal for professional security services for the City of Salinas. Our submission has been carefully tailored to meet the specific needs of the City Hall, City Parking Lots, Monterey Street, Salinas Street Garage, Salinas Permit Center, Steinbeck Library, Salinas Recreation Center, City Maintenance Services Yard, Salinas Municipal Airport, Sherwood Hall Community Center, and the Salinas City Center Improvement Association.

Citiguard is a California-based, full-service private security firm established in 2007 and organized as an S Corporation. With more than 18 years of experience, we specialize in delivering high-performance security solutions for public sector clients, including municipalities, transportation districts, and educational institutions. Our officers-many of whom bring prior law enforcement or military experience-are extensively trained in de-escalation, emergency protocols, and community-focused engagement. We remain fully compliant with BSIS standards and excel at securing high-traffic, multi-use government environments.

Our trusted clients include Monterey-Salinas Transit District, Bakersfield Police Department, City of Torrance, Los Angeles County Probation Department, and numerous school districts statewide. These organizations rely on Citiguard for our responsiveness, professionalism, and consistent service delivery in even the most demanding environments.

With over 1,000 security officers and 12 strategic locations across California, Citiguard operates without the use of subcontractors or sub-consultants-ensuring full accountability, consistent quality, and direct oversight for every assignment.

We are honored to be considered for this critical role and are committed to exceeding the City of Salinas' expectations for safety, professionalism, and reliability. Thank you for your time and consideration. We look forward to the opportunity to partner with you.

Director of Contracts and Procurements
Authorized to execute documents on behalf of Citiguard, Inc.

Tel: 800-613-5903 • Fax: 877-765-0955 • Em: [email protected] • Web: www.citiguardinc.com 800-613-5903 | www.Citiguardinc.com
Appendices (attached)

1. ATTACHMENT 1 – PRICE SCHEDULE

2. ATTACHMENT 2 – SIGNATURE PAGE / VERIFICATION OF LICENSURE

3. ATTACHMENT 3 – LOCAL VENDOR DECLARATION FORM

4. CITIGUARD REFERENCE LETTERS (5)

5. SALINAS BUSINESS LICENSE

6. CITIGUARD COI

7. CITIGUARD PPO LICENSE

8. CITIGUARD W-9

9. CITIGUARD TRANING MANUAL
800-613-5903 | www.Citiguardinc.com
-1-
Citiguard, Inc. fully meets and exceeds all minimum requirements set forth by the City of Salinas as outlined in Section 7 – Scope of Work and Section 15 – List of Facilities.

Citiguard has more than 18 years of direct experience delivering contract security services across California for government facilities, civic centers, municipal parking structures, community centers, transit hubs, and public libraries.

Our proven track record includes continuous performance on comparable contracts within the past decade, including for the Monterey-Salinas Transit District, City of Torrance, Los Angeles County Probation Department, and multiple public school districts. Each of these engagements reflects our deep understanding of high-visibility, public-facing environments that mirror the operational needs of the City of Salinas.

We are proud to report a 78% client retention rate and outstanding contract compliance performance, with consistent delivery of professional coverage, rapid response times, and documented cost-efficiency. Clients have experienced measurable benefits in reduced incident rates, increased public satisfaction, and overall enhancement in facility safety, all achieved without cost overrun or service delays.

A dedicated Project Manager—assigned exclusively to the City of Salinas—will serve as the Designated Point of Contact. This individual has extensive experience managing public- sector security contracts with municipalities of comparable scope and complexity. They will oversee all operations, reporting, and communication, ensuring timely responsiveness and adherence to contract terms.

Citiguard holds all appropriate professional licenses and accreditations required by the State of California, including compliance with the Bureau of Security and Investigative Services (BSIS). We provide a comprehensive spectrum of unarmed and vehicle patrol services, customized to meet the needs of diverse city facilities.

Our proposal includes the following supporting documentation:
• Organizational chart
• Company history and corporate philosophy
• Overview of services
• Summary of major clients and representative contracts • Description of services aligned with the Scope of Work and Facilities listed Citiguard does not use subcontractors or sub-consultants. All personnel are W-2 employees, directly supervised and accountable to our internal leadership team. This structure ensures quality control, consistent standards, and immediate issue resolution.

We are confident that Citiguard’s depth of experience, structure, and performance history make us the ideal partner to protect and serve the City of Salinas with integrity, professionalism, and reliability.
800-613-5903 | www.Citiguardinc.com
-2-
Citiguard is proud to offer a team of highly qualified supervisory, management, and security personnel, all fully bilingual in English and Spanish and equipped with decades of combined experience in the security industry. This linguistic proficiency allows our team to communicate seamlessly across diverse communities, fostering an inclusive, welcoming, and secure environment for all individuals. With 100% of our security personnel fluent in both languages, Citiguard underscores its commitment to accessible, culturally competent service.

We are pleased to introduce our Key Personnel — a dedicated and experienced core team ready to assume oversight responsibilities for the City of Salinas, delivering exceptional, responsive security management in the event of a successful contract award.

Sami Nomair (President – 2007 to present) Primary Contact: 800-613-5903 Sami Nomair is a distinguished leader with deep-rooted ties to law enforcement, serving as an active member of the LAPD Board of Directors. His expertise in community security allows him to adapt enforcement strategies to address evolving challenges across various sectors, including city installations, airports, and homeless shelters. Under his leadership, Citiguard has become a premier security firm, known for its customized solutions, operational efficiency, and unwavering commitment to customer satisfaction.

As a passionate advocate for public safety, Mr. Nomair works closely with local police to foster strong, positive relationships between law enforcement and the communities they serve. His efforts contribute to a safer, more harmonious urban environment, and his dedication to public safety is further demonstrated through his collaboration with the Mayor's Office to improve and expand homeless shelters.

Mr. Nomair's philanthropic endeavors reflect his deep commitment to community well-being. He actively organizes charity drives and celebrity fundraisers, benefiting homeless veterans and underprivileged children. He contributes both his time and financial resources to renowned organizations such as Save the Children, Feeding America, and Children International.

Furthermore, he leads Citiguard’s volunteer employee program, which raises awareness and provides support to veterans' organizations including Wounded Warrior Project, Disabled American Veterans, and Homes for Our Troops.

His interpersonal and communication skills have earned him a reputation for effective collaboration with stakeholders, driving meaningful change within both law enforcement and the communities they serve. Mr. Nomair's ability to balance law enforcement engagement with community advocacy highlights his comprehensive approach to creating safer, more vibrant urban environments.

As the founder of Citiguard in 2007, Mr. Nomair identified and addressed critical gaps in the security industry.
800-613-5903 | www.Citiguardinc.com
-3-
Today, Citiguard is renowned for its large-scale city, state, and government contracts, consistently delivering top-tier security services. His visionary leadership ensures the seamless execution of operations and the highest performance standards.

Sami will oversee the entire organizational team to ensure that the City of Salinas experiences trouble-free security and an impeccable performance schedule across the board.

He continues to invest in his professional development through senior-level operational and business training, underscoring his dedication to excellence in the security industry.

Educational Background:

Sami Nomair earned a Bachelor's Degree in Business Management from the University of California, Los Angeles, in 2011.

Steven Barragan (Regional Manager – 2013 to present)
Mr. Barragan has played a crucial role as Cyber Security Operations Manager during the inception of LifeLock in 2005, bringing invaluable structure to Citiguard’s growing expertise in cyberspace safeguarding. His cybersecurity background has significantly enhanced Citiguard’s capabilities in both physical and digital security, aligning with the rising demand for comprehensive protection.

As Regional Manager, Steven ensures operational efficiency across all ten Citiguard locations by standardizing security protocols, processes, and standards. He leads audits, implements best practices for incident reporting, patrolling, and emergency response, and closely monitors performance metrics like response times and client feedback to drive consistency and improvement.

Steven coordinates regular training programs to ensure that security personnel remain updated on the latest protocols, technology, and safety procedures. His emphasis on leadership and mentorship fosters staff growth, creating clear pathways for promotions and increasing overall job satisfaction.

A significant part of his role involves building and maintaining strong client relationships. Steven holds regular meetings with clients to gather feedback, resolve concerns promptly, and ensure Citiguard's services consistently meet client expectations. He ensures full compliance with California state regulations, including the California Bureau of Security and Investigative Services (BSIS) standards, while continually reviewing legal and safety requirements to keep certifications and training current.

Steven manages resource allocation by overseeing budgets for personnel, equipment, and technology.
800-613-5903 | www.Citiguardinc.com
-4-
He optimizes financial performance while ensuring that crisis and risk management strategies are in place, preparing locations for emergencies such as natural disasters or security breaches.

His coordination of rapid response teams ensures that urgent security needs are promptly addressed.

In addition to promoting the use of advanced security technologies like surveillance systems and communication tools, Steven collaborates closely with IT teams to maintain functionality and reliability. He also facilitates regular communication between location managers, using tools such as 'When I Work' to streamline staffing coordination.

Steven's focus on recruitment and retention ensures that all locations are fully staffed with highly qualified personnel. He works alongside HR to develop retention strategies, such as recognition programs and career advancement opportunities, boosting employee morale and reducing turnover.

By conducting regular site visits, Steven ensures that each location adheres to Citiguard's rigorous standards, addressing any challenges and providing on-site leadership support as needed.

Since joining Citiguard in 2013, Steven has become an indispensable part of the team. His exceptional communication skills and leadership abilities led to his swift promotion to Regional Manager. He also manages all of Citiguard's Caltrans contracts, ensuring optimal safety measures for both staff and surrounding communities.

Educational Background:

Steven holds a Master’s Degree in Computer Science from Caltech and engages in yearly corporate training and administration programs, showcasing his commitment to ongoing professional development. Through his leadership, Citiguard continues to solidify its position as a premier provider of security services across the region.

Henry Linares (Project Manager – 2010 to present):

Mr. Linares is an elite security project manager known for his exceptional leadership and comprehensive skill set in evaluating, selecting, and training security personnel. With a meticulous approach, he leverages his extensive experience to ensure seamless operations and consistent communication with local authorities.

Under his direction, security teams are strategically deployed across high-risk municipal and governmental sites, with a special focus on armed security for contracts requiring heightened protective measures. Mr. Linares’ military background as a decorated Sergeant in the Marine Corps is a cornerstone of his expertise, having served with distinction as a machine gunner and Crew Chief through five combat tours. His military experience is marked by tactical precision, crisis management, and superior leadership under pressure, all of which translate into his current role managing complex security operations.
800-613-5903 | www.Citiguardinc.com
-5-
Educational Background:

Mr. Linares holds a Bachelor's degree in Executive Management from the University of San Diego, reinforcing his dedication to achieving the highest standards in security management and operational excellence. He continuously adapts to emerging threats and evolving security demands, making him a trusted and highly effective leader in the industry.

Michael Quinonez (Director of Security Operations & Training Officer – 2023 to Present) Michael Quinonez is a seasoned security operations leader with over 15 years of experience managing high-risk, multi-site environments across healthcare, government, and corporate sectors. As Project Manager at Citiguard, he plays a pivotal role in directing day-to-day operations, ensuring service consistency, maintaining contract compliance, and responding swiftly to client needs.

Michael currently oversees Citiguard’s security contract with the Los Angeles County Probation Department, managing operations at Los Padrinos and Barry J. Nidorf Juvenile Halls. His responsibilities include implementing advanced security protocols, recruiting and training specialized personnel, conducting emergency response drills, and serving as the primary point of contact with County officials. His leadership has ensured full compliance with complex regulations and high standards for institutional safety.

In addition to his operational leadership, Michael is instrumental in developing and conducting critical training programs for Citiguard personnel. He provides hands-on instruction in medical emergencies (CPR, First Aid, AED), power outage procedures, fire response and prevention, earthquake response, identification and response to suspicious packages, bomb threat protocols, and active shooter response tactics. His training initiatives ensure that all assigned personnel are fully prepared to respond decisively and effectively to a wide range of emergency scenarios.

Prior to joining Citiguard, Michael served as Security Account Manager for Allied Universal, managing behavioral health and detox units at two Southern California Hospitals. His work included leading Active Shooter Response Training in coordination with local law enforcement agencies, and conducting comprehensive risk assessments to improve patient and staff safety.

His earlier roles with Amazon Studios and NMS-Concourse Residential further underscore his expertise in large-scale scheduling, high-profile executive protection, access control enforcement, and visitor management across high-traffic facilities.

Michael is a certified instructor in De-escalation Techniques, Workplace Violence Prevention, Tactical Handcuffing, and the use of Chemical Agents. He is also a Red Cross Certified Instructor in CPR, First Aid, and AED, and holds the IAHSS Certified Healthcare Protection Administrator (CHPA) credential. His combined field knowledge and teaching qualifications make him uniquely suited to lead both training initiatives and security operations for dynamic municipal environments like the City of West Hollywood. 800-613-5903 | www.Citiguardinc.com
-5-
Michael brings extensive hands-on experience with advanced security technologies, including Honeywell ProWatch access control systems, CCTV infrastructure, and incident tracking platforms. He ensures all personnel under his command are prepared to perform with professionalism, vigilance, and adaptability.

In his role as Project Manager, Michael will directly oversee all West Hollywood field operations, ensuring post orders are executed, shift coverage is seamless, incident reporting is prompt and accurate, and that all security personnel reflect the City’s values of professionalism, courtesy, responsiveness, and community engagement.

Certifications & Training:
• Certified Instructor: De-Escalation, Workplace Violence Prevention, Tactical Handcuffing, Chemical Agents
• Red Cross Certified Instructor: CPR, First Aid, AED
• IAHSS Certified Healthcare Protection Administrator (CHPA) • Specialized Training Instructor: Medical Emergencies, Power Outage Procedures, Fire Response, Earthquake Response, Suspicious Packages, Bomb Threat Response, Active Shooter Preparedness
• Advanced knowledge of Honeywell ProWatch, CCTV, and digital security systems Educational Background:

Bachelor of Arts in Criminal Justice University of Las Vegas, Nevada Bashir Oriakhil (Quality Assurance Director – 2011 to present) Mr. Oriakhil has been a driving force behind Citiguard’s commitment to excellence since joining the company in 2011. With a history in quality assurance management dating back to 2005, Bashir was promoted to Quality Assurance Director in 2018, where he oversees all quality control efforts across Citiguard’s California operations. He maintains direct communication with every Quality Assurance Manager, ensuring clear channels for maintaining high-quality service delivery throughout the state.

Bashir plays a pivotal role in developing rigorous protocols that meet client needs, regulatory requirements, and industry standards. His oversight includes conducting regular audits and inspections to assess compliance with security protocols, safety measures, and client expectations. By monitoring performance metrics such as incident reports, response times, and client feedback, he ensures Citiguard consistently meets key performance indicators (KPIs) and delivers optimized services.
800-613-5903 | www.Citiguardinc.com
-6-
A core part of his role is ensuring compliance with evolving local, state, and federal regulations.

Bashir continuously updates company policies, ensuring all certifications and licensing are up to date. He works closely with clients, swiftly addressing concerns and fostering strong relationships.

Bashir leads training programs to keep security personnel equipped with the latest technologies and best practices. In the event of incidents, he manages thorough investigations, preparing detailed reports and implementing preventive measures to avoid future issues. His focus on continuous improvement drives the introduction of new technologies and the refinement of operations through quality management systems (QMS).

He manages both internal and external audits, ensuring compliance with standards such as ISO, while also overseeing risk management strategies to minimize potential vulnerabilities. His collaboration with HR, Operations, and IT ensures quality standards are embedded into recruitment, staff development, and daily operations, while also maintaining the functionality of security systems and technologies.

Bashir gathers client feedback to further refine Citiguard’s services, leads emergency response planning, and oversees the budget for quality assurance, ensuring resources are allocated efficiently and that expenditures improve service outcomes. His leadership ensures Citiguard remains competitive and compliant with industry standards.

Educational Background:

With a military background and service in Afghanistan, Bashir earned a Bachelor’s degree in Business Information Systems from the University of Kabul. He is active in yearly quality assurance courses, reflecting his commitment to continuous improvement in Citiguard’s security services.

Howard Fridkin (Director of Contracts and Procurements – 2015 to present) Primary contact: 800-613-5903
With over a decade of expertise in contract management, security operations, and customer service, Howard Fridkin serves as the Director of Contracts and Procurement at Citiguard. In this role, he oversees the end-to-end procurement process, contract negotiations, and compliance assurance, ensuring that all agreements align with the company's operational needs and regulatory requirements.

Howard plays a pivotal role in evaluating vendor contracts, managing procurement strategies, and optimizing resource allocation to support Citiguard’s expanding security operations. He ensures that all contracts adhere to industry best practices and legal standards while maintaining cost efficiency and service excellence. His meticulous approach to contract oversight and risk management safeguards the company’s financial interests and enhances its ability to deliver superior security solutions.
800-613-5903 | www.Citiguardinc.com
-7-
Previously serving as a Senior Security Consultant, Howard conducted comprehensive security audits, risk assessments, and compliance evaluations, identifying vulnerabilities and strengthening client security infrastructures. His expertise in physical, operational, and cybersecurity now informs his strategic approach to contract development, ensuring that all procurement decisions support Citiguard’s commitment to high-quality security services.

Beyond contract administration, Howard continues to mentor and lead cross-functional teams, providing guidance on procurement strategies, compliance with OSHA, HIPAA, and GDPR, and vendor risk management. He also plays an active role in corporate training programs, reinforcing Citiguard’s dedication to professional development and operational excellence.

Howard's data-driven approach to procurement and contract management enhances operational efficiency, reduces risks, and strengthens Citiguard’s ability to meet the evolving needs of its clients.

Through his leadership in contract negotiations, supplier relations, and strategic sourcing, he contributes to the company’s continued growth and reputation as an industry leader in security services.

Educational Background:

Howard Fridkin holds an MBA from UCLA, showcasing his academic achievements in combination with extensive professional experience.

Aurora Olmos (Senior Accounts Manager – 2014 to present) Primary contact: 800-613-5903
As an Accounts Manager at Citiguard, Aurora Olmos plays a pivotal role in ensuring the company’s 24/7 availability to clients. She has designed a highly efficient response system tailored to meet the unique security needs of each client. Aurora’s dedication to precisely matching client requirements with the right security team has resulted in optimal scheduling, deployment, and overall performance across all managed sites.

In her role as the primary client liaison, Aurora ensures that client concerns and inquiries are addressed promptly. She works closely with clients to fully understand their evolving security needs, adapting strategies to keep up with any changes. By building strong, trust-based relationships, Aurora ensures that clients have complete confidence in the quality of Citiguard’s services.

Service delivery oversight is another area where Aurora excels. She carefully monitors the performance of security personnel to ensure they consistently meet or exceed service expectations. Any issues or complaints are resolved swiftly, maintaining a high level of client satisfaction. Aurora conducts regular site visits to assess security operations firsthand, facilitating open communication with both clients and staff to gather feedback and implement improvements.
800-613-5903 | www.Citiguardinc.com
-8-
Aurora also plays a key role in staff coordination and management. She ensures the right security personnel are assigned to each client site, carefully coordinating the deployment of guards, supervisors, and support staff to ensure appropriate coverage. She works closely with the operations team to develop schedules that align with client requirements while ensuring that staffing levels remain sufficient. Additionally, she ensures that security personnel are trained to meet each client’s specific needs, including site-specific protocols and updated industry standards.

Contract management is a central aspect of Aurora’s role. She ensures that all contract terms are fulfilled, including service hours and staffing requirements. As contracts approach renewal, Aurora engages clients in discussions about extending or expanding the service agreement.

She also works with the finance department to ensure accurate billing, manage budget concerns, and adjust pricing based on changes in scope or additional services requested.

In incident management, Aurora is responsible for overseeing the reporting of any security incidents, ensuring reports are completed accurately and promptly shared with clients. She works closely with security supervisors to resolve incidents quickly and efficiently, minimizing disruption to client operations. Aurora also identifies potential security risks and recommends strategies to mitigate those risks, ensuring the highest level of protection for clients.

Operational coordination is a key responsibility for Aurora, as she collaborates with field management and operations teams to ensure all logistical needs are met, including personnel, equipment, and technology. She tracks account-related expenses and monitors profitability to ensure services remain within budget. Aurora, working with the HR Department, also ensures full compliance with local regulations and industry standards, such as OSHA or other relevant guidelines.

Client reporting and analytics are central to Aurora’s approach. She provides detailed reports on security services, including performance metrics, incident logs, and response times, allowing clients to assess the effectiveness of their security measures. Aurora uses these insights to propose improvements and gather client feedback regularly, ensuring that service delivery is continuously optimized.

Aurora also contributes to Citiguard’s business development efforts by identifying opportunities to expand relationships with existing clients. She proposes additional services, upgrades to security systems, and new technologies that meet evolving needs. Client retention is a major focus for Aurora, who ensures exceptional service that leads to contract renewals and long-term partnerships.

Educational Background:

Aurora Olmos holds a Master's Degree in Financial Economics & Performance Studies in Management from the University of California at Santa Cruz, which reflects her comprehensive understanding of financial and management principles.
800-613-5903 | www.Citiguardinc.com
-9-
Security Officers
At Citiguard, we take pride in employing security officers who are not only highly trained but also exceptionally experienced and deeply committed to public safety. All Citiguard officers possess, at minimum, a high school diploma, with many holding college degrees, military service records, or prior law enforcement experience—reinforcing the professionalism and discipline we bring to every assignment.

As part of our rigorous hiring criteria, Citiguard requires a minimum of five years of prior security guard experience for all applicants. For candidates with military or law enforcement backgrounds, a minimum of three years of relevant field service is accepted. This ensures that every officer we deploy is field-tested, situationally aware, and mission-ready from day one.

Our officers are California POST-certified and have completed basic Police Academy training, equipping them with the tactical proficiency and operational readiness needed to manage high- risk environments. Their robust experience enables them to assess threats swiftly, respond with sound judgment, and remain composed in dynamic, high-pressure situations.

Fluent in both English and Spanish, Citiguard officers are skilled communicators who foster respectful, effective engagement with the public and the diverse communities we serve. Their training in de-escalation, behavioral recognition, and public interaction promotes safe, inclusive environments at every assignment.

Whether securing high-profile municipal properties, conducting complex risk assessments, or responding to critical incidents, our officers operate with professionalism, accountability, and confidence. Their extensive emergency preparedness includes:
• Medical emergency response
• Crisis and evacuation protocols
• Fire and earthquake procedures
• Suspicious package recognition
• Bomb threat and active shooter response
Citiguard officers are also trained to manage sensitive interactions with transient and unhoused individuals. They approach each encounter with empathy and professionalism, often coordinating with outreach organizations such as LAHSA, PATH, Hope of the Valley, and Mercy House to help connect individuals with support services and shelter resources.

We are deeply committed to continuous training and development. Our personnel receive ongoing instruction on evolving security protocols and technologies, including CitiTrac digital reporting systems and Wolfcom body-worn camera technology, to ensure transparency, accountability, and operational excellence.
800-613-5903 | www.Citiguardinc.com
-10-
In addition to their core responsibilities, many Citiguard officers serve as mentors to junior staff, fostering leadership growth and reinforcing our company-wide culture of service excellence.

Through their qualifications, discipline, and commitment to public safety, Citiguard officers do more than secure properties—they build confidence, elevate standards, and serve as proactive partners in community protection.

ORGANIZATIONAL CHART
CEO
Gharzai Nomair
President
Sami Nomair
Director of
Accounting
Karina
Arzumanyan
Sr. Human
Resources
Manager
Ana Arabyan
Communication
& Community
Liaison
Lisa Shoots
Secretary
Sami
Nomair
Treasurer
Sami
Nomair
Director of Security
Operations and
Training Officer
Michael
Quinonez
Vice President
Gary Wallach
Director of Contracts
and Procurements
Howard Fridkin
Training &
Compliance
Officer
Caeser Flores
Security
Analyst
Angelo
Torres
Sr. Account
Manager
Aurora
Olmos
Regional
Manager
Steven
Barragan
Project
Manager
Henry
Lineras
District
Supervisor
Sergio Molina
Quality Assurance Director
Bashir Oriakhil
Security
Coordinator
Jesus
Botello
Director of
Operations
Hovik Abraamyan
Field
Supervisor
Melvin
Narayan
Field
Supervisor
Noor
Nomair
Dispatcher
Ana Aguirre
Second-Level
Supervisor
Sergio
Torosyan
-11--11-
800-613-5903 | www.Citiguardinc.com
-12-
Experience Servicing Municipal Facilities
Citiguard brings extensive, hands-on experience securing a wide range of municipal environments that directly align with the facility portfolio of the City of Salinas. We currently provide contracted security services to numerous cities, counties, public agencies, and transportation authorities across California—ensuring safety, access control, public engagement, and rapid incident response for city halls, libraries, public garages, community centers, transit stations, and more.

City Halls and Administrative Centers
Citiguard provides daily security services for municipal government buildings and civic campuses in jurisdictions such as the City of Torrance, City of Coachella, and County of Orange/Santa Ana. Our officers perform lobby access control, visitor screening, public assistance, and evening patrols. We are highly experienced in maintaining an open, welcoming environment while enforcing city policies with professionalism and respect.

City Parking Lots, Streets, and Garages
Our officers currently patrol city-owned parking structures and surface lots in both urban and suburban settings, including for the Bakersfield Police Department, where we provide 24/7 vehicle patrol and fixed-post coverage. We actively deter loitering, vandalism, vehicle break-ins, and unauthorized access while maintaining high visibility to reassure the public.

Libraries and Recreation Centers
Citiguard safeguards library branches and recreational facilities in various cities and school districts, including all public libraries in the City of Arcadia and the County of Orange/Santa Ana.

We ensure peaceful environments by addressing disruptive behavior, monitoring for safety threats, and upholding facility rules through trained, non-confrontational engagement techniques.

City Maintenance Yards and Infrastructure Sites
We provide security for city maintenance yards, fleet vehicle depots, and infrastructure zones by performing access control, perimeter patrols, and asset protection services. Our work with Caltrans includes similar oversight for large-scale operations, and our security coverage at multiple Vulcan Materials Company locations involves extensive patrol of outdoor yards, environmental areas, and heavy-equipment staging zones. 800-613-5903 | www.Citiguardinc.com
-13-
Municipal Airports and Transportation Facilities
Citiguard has current contracts providing transportation and aviation security services. At Marin County Airport, we perform FAA-aligned access control, ID verification, perimeter security, and emergency response coordination. Our officers are trained to meet the heightened standards and regulatory requirements of airport environments.

Community Centers and Civic Halls
Citiguard secures community venues such as Sherwood Hall–type facilities, neighborhood centers, and event halls. Our personnel are trained in large-crowd management, parking oversight, pedestrian flow, and public safety coordination. We have successfully managed major event deployments, including the 2023 and 2024 Breeders’ Cup, where over 100 Citiguard officers provided traffic control, access security, and crowd supervision—without a single reportable incident.

Business Improvement Districts and Downtown Associations Citiguard proudly serves multiple business improvement districts, including those similar to the Salinas City Center Improvement Association. We currently provide safety ambassadors and patrol officers for areas such as Downtown Santa Ana and San Diego’s Hillcrest Business Association. Our high-visibility patrols, direct merchant support, and collaborative partnerships with local law enforcement have significantly reduced criminal activity and garnered public recognition in regional media.

Experience Managing Transient and Homeless Populations
Citiguard has extensive experience addressing the complex challenges posed by the presence of transient and unhoused individuals around city facilities, public spaces, and business districts.

For many years, we have provided specialized security services in partnership with prominent organizations such as PATH (People Assisting the Homeless), Hope of the Valley Rescue Mission, LAHSA (Los Angeles Homeless Services Authority), and Mercy House. These long- standing partnerships have helped shape our approach to homelessness not merely as a security issue—but as a community issue requiring balance, compassion, and firmness.

Our officers are trained in de-escalation techniques, trauma-informed response, and both mental and physical intervention methods. We focus on redirecting aggressive or chronically unhoused individuals away from unauthorized locations that hinder public access and disrupt the safe use of civic facilities. In doing so, we work in tandem with social outreach programs to guide individuals toward shelter resources, mental health services, and permanent housing solutions.

Through this combined strategy, Citiguard has successfully supported municipalities in reducing loitering, public safety complaints, and repeat calls for service—while promoting community access to City Halls, libraries, recreation centers, and other public sites. 800-613-5903 | www.Citiguardinc.com
-14-
This approach aligns with the City of Salinas’ goals of fostering safe, inclusive, and well- maintained civic environments.
____________________________________________________________________________ Current References
Citiguard takes pride in delivering exceptional security services to a distinguished roster of clients across diverse sectors, including city, state, and federal government agencies, as well as high-profile organizations. Our unwavering commitment to excellence, reliability, and professionalism has earned the trust of these esteemed partners. Below is a selection of the valued clients who have entrusted Citiguard with their security needs, showcasing our proven dedication to ensuring safety and peace of mind for all those we serve.

MARIN COUNTY AIRPORT
451 Airport Rd, Novato, CA 94945
Contact person: David Lawlor, Purchaser
Phone: (415) 473-4217
Email: [email protected]
Start date: August, 2024
Term of contract: Ongoing
Annual contract amount: $128,026.00
Service:

Citiguard provides nightly security at Marin County Airport (Gnoss Field), patrolling the facility from (8:00 PM) to (6:00 AM), seven days a week. The team reports unlawful activities and emergencies to the appropriate agencies and the County Airport Manager. In cases of public emergencies or incidents like fire, theft, or vandalism, Citiguard promptly notifies the Airport Manager or, if unavailable, contacts emergency responders and documents the events. An all- weather patrol vehicle with adequate lighting is used for night monitoring. A nightly email report is sent to the Airport Manager, and employees at secure access points are screened with metal detectors.

CALIFORNIA LOTTERY ASSOCIATION
700 North 10th St. MS: 4-3, Sacramento, CA 95811
Contact person: Jennifer Tointon-Painter
Phone: (916) 247-9182
email: [email protected]
800-613-5903 | www.Citiguardinc.com
-15-
(cont’d.)
Start date: March 7, 2024
Term of contract: Ongoing
Five year contract amount: $12,500,000.00
Service:

Citiguard deploys 50 security officers to safeguard 12 California Lottery locations statewide. Our team conducts routine patrols, enforces access control measures, and ensures a visible security presence. Officers are trained to manage high-security environments effectively, addressing potential threats while maintaining a professional demeanor. Citiguard’s close collaboration with local law enforcement enables rapid response to emergencies, providing a secure environment for staff, visitors, and customers. This contract demonstrates Citiguard’s ability to handle high- profile, multi-location security operations with precision and professionalism.

LOS ANGELES COUNTY PROBATION DEPARTMENT (2 locations)
BARRY J. NIDORF JUVENILE HALL
16350 Filbert St. Sylmar, CA 91342

LOS PADRINOS JUVENILE HALL
7285 Quill Dr. Downey, CA 90242
Contact person: Nicholas Esparza, Director
Tel: (323) 804-6152
Email: [email protected]
Start date: September 5, 2023
Term of Contract: Ongoing
Contract amount: $6,000,000.00
Service (both locations):

We provide comprehensive security coverage across multiple locations with a dedicated team of 96 highly trained security officers. Our personnel adhere to stringent security protocols, utilizing metal detectors to conduct thorough screenings of staff, inmates, and visitors, ensuring that all individuals entering the facilities are properly vetted.

Our armed security officers maintain a 24/7 presence, actively monitoring and patrolling facility entrances. They meticulously document staff and visitor movements, maintaining detailed records to uphold the highest standards of safety, accountability, and compliance.

Beyond entrance security, we deploy security golf carts for continuous perimeter patrols, enhancing visibility and response capabilities. This proactive approach ensures that all areas remain secure, well-monitored, and prepared for any potential threats. 800-613-5903 | www.Citiguardinc.com
-16-
BAKERSFIELD POLICE DEPT.
1600 Truxtun Avenue, Bakersfield, CA 93301
Contact Person: Nicole Anderberg, Director
Tel: (661) 326-3978
Email: [email protected]
Start date: February 13, 2023
Term of contract: Ongoing
Contract amount: $1,090,297.00
Service:

Citiguard operates a fleet of patrol vehicles providing 24/7 security coverage for Bakersfield's downtown area. Our high-visibility patrols ensure constant surveillance, rapid incident response, and the safety of city staff, residents, and visitors. Officers are trained in advanced de-escalation techniques to diffuse volatile situations involving criminal behavior, transient populations, and potential fire or public safety threats. In aggressive scenarios, Citiguard officers coordinate seamlessly with the Bakersfield Police Department, leveraging a strong partnership for immediate intervention. Our proactive approach, focusing on deterring criminal activity and maintaining public safety, has significantly enhanced the security landscape in the downtown district.

PASADENA USD
351 S Hudson Ave., Rm 102, Pasadena, CA 91009
Contact name: Julianne Reynoso, Assistant Superintendent, Student Wellness and Support Tel: (626) 396-3600 ext. 88238
email: [email protected]
Start date: December 1, 2023
Term of contract: Ongoing
Contract amount: $538,284.00
Service:

Citiguard deploys three dedicated patrol vehicles to actively traverse and monitor 28 Pasadena Unified School District sites, including schools, libraries, community centers, children’s facilities, administrative offices, and district buildings. Our security teams respond promptly to on-campus emergencies, secure gates and access points, de-escalate incidents involving criminal or disruptive behavior, remove unauthorized individuals, and coordinate with local law enforcement when intervention is required for aggressive or unlawful conduct. 800-613-5903 | www.Citiguardinc.com
-17-

VULCAN MATERIAL COMPANY
16013 E Foothill Blvd, Irwindale, CA 91702
Contact Person: Shannon Pedroza, Sourcing Lead, Western Division Tel: (626) 513-5521
Email: [email protected]
Start date: July, 2024
Term of contract: Ongoing
Contract amount: $2,300,000.00
Service:

Citiguard provides blanket security services across 45 Vulcan Materials locations in California, encompassing quarries, asphalt plants, ready-mix sites, offices, and distribution centers. With a team of 75 highly trained security officers, we deliver both on-site and vehicle patrols, ensuring coverage in remote and high-risk areas. Our guards are proficient in enforcing safety protocols, managing access control, and de-escalating conflicts, particularly with transient populations that often pose challenges. By maintaining strong relationships with local law enforcement, we facilitate swift emergency responses when necessary. Citiguard's efforts safeguard Vulcan's employees, assets, and surrounding communities, ensuring uninterrupted operations and a secure environment.

ARCADIA PUBLIC LIBRARY
20 W. Duarte Road, Arcadia, CA 91006
Contact person: Samantha Alba, Library Services Manager Tel: (626) 821-4364
Email: [email protected]
Start date: July, 2023
Term of contract: Ongoing
Contract amount: $77,940.00
Service:

Citiguard provides vigilant monitoring and proactive patrol services to ensure the safety and comfort of library staff, patrons, and visitors. Our assigned security officer is professionally trained in de-escalation techniques and responds effectively to disruptive or unauthorized individuals, maintaining a secure, welcoming environment for all. 800-613-5903 | www.Citiguardinc.com
-18-
Citiguard, Inc. affirms that, from 2015 to the present day, neither our company nor any business organization owned or operated by Citiguard—including any parent company or subsidiaries—has received any notices of violation, corrective action notices, enforcement actions or orders, warning notices, or other forms of permit violation or non-compliance documentation from any public agency, including but not limited to OSHA or other regulatory bodies.

Citiguard takes compliance, workplace safety, and regulatory oversight with the utmost seriousness. We have implemented strict internal protocols, routine safety training, and regular audits to ensure full adherence to federal, state, and local requirements. This consistent commitment to compliance reflects our dedication to operational excellence, transparency, and accountability across all contracts.

Should the City of Salinas require any additional documentation or verification, we are prepared to provide it promptly upon request.

Citiguard, Inc. affirms our full capability and commitment to providing comprehensive security services throughout the City of Salinas. With over 18 years of experience delivering municipal security solutions across California—and a robust operational infrastructure—we are fully prepared to deploy trained personnel to all designated City-owned facilities and locations, regardless of size, complexity, or logistical demand.

We acknowledge and confirm our ability to provide consistent, reliable coverage at all identified sites, including but not limited to: the Salinas Municipal Airport, Permit Center, Steinbeck Library and other public libraries, community recreation centers, public parking garages and surface lots, the Salinas Train Station, Sherwood Hall, and any additional City- owned facilities or properties outlined within the RFP.

Citiguard maintains a statewide network of over 1,000 licensed officers and twelve fully staffed branch offices—including regional coverage in Monterey County. This ensures not only immediate deployment capacity, but also backup staffing, local supervision, and rapid incident response across all service zones. Our service model is flexible, scalable, and customized to meet the City's evolving public safety needs.

We are honored by the opportunity to serve the City of Salinas and stand ready to protect its residents, staff, and visitors with the highest standards of professionalism and reliability.
800-613-5903 | www.Citiguardinc.com
-19-
Citiguard, Inc. affirms our full capability and commitment to providing professional security services to the Salinas City Center District (Downtown District) as well as to all eligible non-profit organizations operating within the City of Salinas. We understand the essential role these groups play in supporting the city’s cultural, economic, and community development initiatives, and we are proud to extend our services in support of their missions.

Citiguard will provide security services to these entities under the same terms, conditions, and hourly rates as outlined in our proposal to the City of Salinas. Our service model is designed to be flexible, responsive, and scalable, enabling us to meet the unique needs of downtown business corridors, special events, public spaces, and nonprofit-led community programs.

With extensive experience securing downtown districts and nonprofit partnerships across California—including our work in the Downtown Santa Ana District and Hillcrest Business Association in San Diego—Citiguard brings a proven approach to maintaining public safety while fostering a welcoming environment.

We welcome the opportunity to support the Salinas City Center and its nonprofit community with dependable, professional, and community-conscious security services.

CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 14 of 29

ATTACHME
NT 1 – PRICE SCHEDULE
The following rate shall be provided:

Supervisor Unarmed Cost
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Securit
y Officer
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Patrol
Rate (including vehicle)
Pay Rate $ /hr.

Billing Rate $ /hr.

Overtime Rate$ /hr.

Alarm Resp
onse
Response Rate$ /hr.

COMMUNI

CATION EQUIPMENT
2-Way Radio Rate $ /hr.

Cellular Phone Rate $ /hr.

Cell/Radio $ /hr.
~End of Att
achment 1~

21.00 28.00

19.00 26.00

20.00 33.00

49.50 45.00

39.00 0.00

0.00 0.00

42.00 CITY OF SALINAS
REQUEST FOR PROPOSAL: UNIFORM SECURITY GUARD SERVICES Page 16 of 29

ATTACHMENT 3 – LOCAL VENDOR DECLARATION
FORM
~End of A
ttachment 3~
N/A
City of Salinas
Business License
19 27 1 OCCUPATIONS AND SERVICES 30 Jun 2025
License Section Business Name and Address Expiration Date Citiguard, Inc.
22736 Vanowen St., Ste. 300
West Hills, CA 91307
License Number
FINBL25-00394
This license evidences that the person(s), firm, or corporation named herein has paid the applicable fee required by the Salinas City Code through the date indicated above. Under provisions of Chapter 19-3 of the Salinas City Code, issuance of this license shall not be construed as compliance with other City Ordinances, State Law, or Federal Laws.

DISPLAY IN A CONSPICUOUS PLACE THIS LICENSE IS NOT TRANSFERABLE Citiguard, Inc.
22736 Vanowen St., Ste. 300
West Hills, CA 91307
Type of Business

SECURITY SERVICES

COUNTY OF LOS ANGELES

PROBATION DEPARTMENT

GUILLERMO VIERA ROSA
Chief Probation Officer
Rebuild Lives and Provide for Healthier and Safer Communities

CAMPUS SAFETY & SECURITY OPERATIONS
9150 EAST IMPERIAL HIGHWAY – DOWNEY, CALIFORNIA 90242
(562) 940-3554
June 21, 2024
TO: Michael Quinonez, Citiguard Account Manager
FROM: Eric Strong, Chief Safety and Security Officer
SUBJECT: LETTER OF RECOMMENDATION
To Whom It May Concern,
As the Chief of Campus Safety and Security Operations for the Los Angeles County Probation Department, I am writing this letter of recommendation on behalf of Citiguard Security Services.

Citiguard Security Services entered in contract with Los Angeles C ounty Probation Department September 1, 2023, to provide weapons screening, perimeter patrol and secure entrance monitoring at two of our juvenile detention facilities. Citiguard provided a carefully selected group of individuals that would bring a higher level of professionalism and experience. At the time of onboarding, our department was experiencing a significant change in security protocols including physical enhancements.

Throughout these changes, Citiguard Account Manager Michael Quiñonez has been readily available and responsive to requests from our Campus Safety and Security Operations (CSSO) team. Michael has been proactive in reporting safety/security concerns and has been a part of the conversations to address the many issues we have encountered during our implementation of new security protocols.

Citiguard Security Services
June 21, 2024

Page 2 of 2 ends

There have been some adjustments made by Citiguard regarding their personnel at various post assignments, yet most of the guards are actively seeking to perform at a high level and are constantly communicating with the CSSO team. CSSO and Citiguard have developed a positive working relationship and we appreciate their collaboration in fostering a safe and secure work environment at both Los Padrinos Juvenile Hall and Barry J. Nidorf Treatment Facility.

Respectfully,
Eric Strong
Chief of Campus Safety and Security Operations
Los Angeles County Probation Department

PASADENA UNIFIED SCHOOL DISTRICT

STUDENT WELLNESS AND SUPPORT SERVICES
September 18, 2024
From: Julianne Reynoso
To Whom It May Concern:

I am thrilled to affirm the commitment of the Pasadena Unified School District (PUSD) to our newly forged partnership with Citiguard Security. The prospect of a conh·actual and professional service has be
en outstanding.

We are particularly proud of the effective and efficient communication and heightened sense of urgency
Citiguard takes to protect the well-being of our staff, students, and schools/building. We receive daily reports that impart a 12-hour range of services and allow us to take action if anything is seen as unsafe. The staff is professional, responsive, and empathetic, yet direct when safety and security are at the forefront.

The Pasadena Unified School District supports all efforts Citiguard Security has made to bring a sense of
safety, prevention, intervention, and communication to our conununity. /Ve will transform education to empower students to succeed. 351 South Hudson hen11e, Room 208 • Pasadena Califomia 91109 • (626) 396-3600, x 88238 • (626) 793-9858/ax • www.p11sd.us To whom it may concern,
The City of Bakersfield engaged in a contract with Citi-Guard for private security services in February 2022. Citi-Guard provides a high visibility, proactive security patrols for various portions of the city at our direction. I currently manage the account on behalf of the city and have found the work product provided by Citi-Guard to be valuable for our municipality. My communication with the account manager, Robert Smith has been excellent, and I have found him to be very receptive. Mr. Smith and his team have shown to be flexible, dependable, and hard working.

Best,
Lt. Matt Gregory
Bakersfield Police Department
1601 Truxtun Av, Bakersfield, Ca 93301
661-326-3981
Tiffany Schmid
Chief Administrative Officer
August 22, 2024
RE: Citiguard, Inc.

To Whom it May Concern:

County of El Dorado
Chief Administrative Office
330 Fair Lane
Placerville, CA 95667-4197
Phone (530) 621-5530
Fax (530) 626-5730
Since June of last year, the County of El Dorado has contracted with Citiguard, Inc. for security services at several of our facilities, including our Administration offices, Library, Health and Human Services offices, and our Navigation Center for homeless services.

Citiguard has provided two unarmed security guards to patrol our sites for twelve hours per day, serving as a visual and physical deterrent to crime.

Citiguard's staff consistently perform their duties in an efficient, conscientious manner, demonstrating professionalism to all persons they encounter on County property. All Citiguard personnel have exercised good judgment and shown to be courteous, alert, and capable of diffusing confrontational situations. Their problem-solving skills and initiative have proven them to be a reliable choice for our security needs.

I highly recommend Citiguard's services. If you would like any further information about our experience with Citiguard, please feel free to contact me by phone at (530) 621- 5833 or by email at [email protected].

Sincerely,
Kevin Gilliland
Facilities Program Manager
City of
Arcadia
Arcadia
Public
Library
20 West Duarte Road
Arcadia, CA 91006
(626) 821-5567
\V\vwArcadia CA. gov /Library
Gilb Museu111
of Arcadia
Heritage
380 West Huntington Drive
Post Office Box 60021
Arcadia, CA 91006-6021
(626) 574-5440
\v•.vw.ArcadiaCA.gov/Museurn
Darlene Bradley
Director of Library
and lviuseum Setvices
March 5, 2024
To whom it may concern:

It is my pleasure to write a letter of recommendation for Citiguard. Last year the Arcadia Public Library switched security companies, and it was the best decision for our facility. Citiguard staff are professional, easy to contact whenever there is a problem, and will strive to pair the right guards for your facility_ Staff took the time to tour our facility and discuss our needs. Guards are on time, personable, practice a polite but firm approach when it comes to enforcing library policies, and have excellent communication with members of the public and library personnel. Our experience with Citiguard has exceeded our expectations and I'm sure they will meet your facilities needs as well.

Sincerely,
J)JLui()
Samantha Alba \
Library Services Manager
City of Arcadia Public Library
626.821.5565
[email protected]

CALIFORNIA OEPARTM
·
E
·
_NT OF
·CONSUMER
. AFFAl;RS
f '
PRI'VATE{
License No. 'ppQ121572'
Recei�t No. 13357�:
' ,
; \ ' .,
>"\.
)
-,
rl­
..... ''
\0
.p. w
ex, -.J 0 0 .i,.­u,
0 ....
.... ....
� <.. �- ', '; ,. I
Cl�IGU�RD , , ,
22736 VANOWEN,ST STE 306
WE:STHILLS; CA 9�307-2656
4,· ,.
\"'• /'
,.
/� .

J
ti '- ·'; }� �' s�-;:,�(
.r
' " ' ,, . '
·./• ....
',
, , : ' , ,
.. � ,·
',,. ,,
\ C . : \.
' \
. ( ,·,_
:', "'·je ;·;"', ..
999C::-L08 �6 V':J SlllH .lS3M
008 3.lS .LS N3MONVA 98LGC::

Ol:1Vn81.ll':J
Bureau of Security and Investigative Services
P.O. Box 989002
West Sacramento, CA 95798-9002
J .{916) 322:4000
In accordance with the provisions of
Division 3, Chapter 11.5 of the Business
and Professi·ons Code, the company
named hereon is issued a Private Patrol
Operator License Renewal.
·. /· .. /,, \. .. � : - -_,_ -,.
/• , 12,04.CERT04S.071823
l006·86L96 V':J O.lN311'JVl::l':JVS .lS3M
l00686 X08 Od
S3':Jl/\l::13S 3/\l.lV81.lS3/\NI ONV A.lll::ln':J3S ::10 nV3l::ln8

ANY PROPRIETOR/PARTNER/EXECUTIVE
OFFICER/MEMBER EXCLUDED?

INSR ADDL SUBR

LTR INSD WVD

PRODUCER CONTACT
NAME:

FAXPHONE
(A/C, No):(A/C, No, Ext):

E-MAIL
ADDRESS:

INSURER A :

INSURED INSURER B :

INSURER C :

INSURER D :

INSURER E :

INSURER F :

POLICY NUMBER POLICY EFF POLICY EXPTYPE OF INSURANCE LIMITS(MM/DD/YYYY) (MM/DD/YYYY)

AUTOMOBILE LIABILITY

UMBRELLA LIAB

EXCESS LIAB

WORKERS COMPENSATION

AND EMPLOYERS' LIABILITY
DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required)

AUTHORIZED REPRESENTATIVE
EACH OCCURRENCE $
DAMAGE TO RENTEDCLAIMS-MADE OCCUR $PREMISES (Ea occurrence) MED EXP (Any one person) $
PERSONAL & ADV INJURY $
GEN'L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $

PRO-POLICY LOC PRODUCTS - COMP/OP AGGJECT
OTHER: $

COMBINED SINGLE LIMIT
$(Ea accident)
ANY AUTO BODILY INJURY (Per person) $

OWNED SCHEDULED
BODILY INJURY (Per accident) $AUTOS ONLY AUTOS

HIRED NON-OWNED PROPERTY DAMAGE
$AUTOS ONLY AUTOS ONLY (Per accident)
$

OCCUR EACH OCCURRENCE
CLAIMS-MADE AGGREGATE $
DED RETENTION $

PER OTH-

STATUTE ER
E.L. EACH ACCIDENT
E.L. DISEASE - EA EMPLOYEE $
If yes, describe under
E.L. DISEASE - POLICY LIMITDESCRIPTION OF OPERATIONS below INSURER(S) AFFORDING COVERAGE NAIC #

COMMERCIAL GENERAL LIABILITY
Y / N
N / A
(Mandatory in NH)

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE

THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS

CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed.

If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:

CERTIFICATE HOLDER CANCELLATION
© 1988-2015 ACORD CORPORATION. All rights reserved.ACORD 25 (2016/03)

CERTIFICATE OF LIABILITY INSURANCE

DATE (MM/DD/YYYY)
$
$
$
$
$
The ACORD name and logo are registered marks of ACORD
3/28/2025
(818) 986-7283 (818) 986-4949
035378
CitiGuard Inc
22736 VANOWEN STREET STE 300
West Hills, CA 91307
20052
31194
A 1,000,000
BMGG100043-01 3/26/2025 3/26/2026 100,000
5,000
1,000,000
3,000,000
3,000,000
MISC ERRORS OMM 1,000,000
1,000,000B
72APB011105 3/26/2025 3/26/2026
5,000,000A
BMGE100039-01 3/26/2025 3/26/2026
5,000,000
C Crime 107479980 7/27/2024 Single Loss 100,000

FOR INFORMTATIONAL PURPOSES ONLY
CITIINC-01 IFATHIPOUR
Paramount Exclusive Insurance Services, Inc.
15760 Ventura Blvd. Suite 500
Encino, CA 91436 [email protected]
Evanston Ins. Co.

National Fire & Marine Ins.

Travelers Casualty and Surety Company of America
Aggregate
7/27/2025
X
X
X
X
X X

FOR INFORMATIONAL PURPOSES ONLY
22736 Vanowen Street Suite 300
West Hills, CA 91307
90 1003623
01/01/2025
Citiguard, Inc
T

RAINING
P
M
C
reated
b
y
M
ichael
Q
uinonez –
F
ire
L
ife &
S
afety
D
irector
C
itiguard
E
mploys
a

C
omprehensive
a
nd
S
ystematic
A
pproach
t
o
T
raining,
E
nsuring
T
hat
A
ll
S
ecurity
P
ersonnel
M
eet
a
nd
M
aintain
t
he
N
ecessary
C
ertifications
a
nd
Q
ualifications
.

800-613-5903 | www.Citiguardinc.com

INITIAL TRAINING PROGRAMS
………………………………………1

CERTIFICATION VERIFICATION
……………………………………..1

REGULAR REFRESHER TRAINING
…………………………………………..1

CONTINUOUS EDUCATION
……………………………………………………..1

REGULAR ASSESSMENTS AND EVALUATIONS
………………………2

HANDS-ON TRAINING
………………………………………………………………2

MANDATORY CONTINUING EDUCATION
………………………………2

DOCUMENTATION AND RECORDS
…………………………………………2

SUPERVISION AND MENTORING
…………………………………………….2
PC-832 ARREST AND FIREARMS COURSE
……………………………..3

CLIENT RELATIONS / SERVICE ATTITUDE
……………………………….3

EMERGENCY PREPAREDNESS
…………………………………………….3 - 4

800-613-5903 | www.Citiguardinc.com
(cont’d.)

GOVERNEMENT LAWS AND REGULATIONS
…………………………..4

SECURITY PATROIL PROCEDURES
…………………………………………4

CITIGUARD DE-ESCALATION GUIDELINES
……………………………4
•
Recognizing Early Warning Signs………………………………………..4
•
Control Your Own Emotions……………………………………………….5
•
Build Rapport…………………………………………………………………..5
•
Clarify the Situation………………………………………………………….5
•
Set Boundaries………………………………………………………………..5
•
Use Verbal and Non-Verbal Techniques………………………………5
•
Seek Assistance…………………………………………………………..5 - 6
CITIGUARD’S COMPREHENSIVE TRAINING FOR PROACTIVE

DEFENSE
…………………………………………………………………
6 •
Firearm Safety Certification (Armed Guards Only)…………………6 800-613-5903 | www.Citiguardinc.com
(cont’d.)
•
PR-24 Baton Certification…………………………………………………..6
•
Pepper Spray/Mace Permit………………………………………………..6
•
Emergency Response Training………………………………………..6 - 7
•
Report Writing Training………………………………………………………7
•
Safety Training………………………………………………………………….7
•
Community Rules and Regulations………………………………….7 - 8
•
Procedural Training…………………………………………………………..8
•
Interpersonal Relationships……………………………………………….8
•
Ongoing Training and Drills………………………………………………..8
•
Hours of Training…………………………………………………………8 - 11
EMPLOYEE PHYSICAL EXAMS…………………………………………..11 - 12
•
Pre-Employment Medical Screening………………………………….11
•
Annual Physical Exams……………………………………………………11
•
Selection of Qualified Healthcare Providers……………………….12 800-613-5903 | www.Citiguardinc.com
(cont’d.)
•
Standardized Medical Examination Protocol………………………12
•
Documentation and Record-Keeping…………………………………12
•
Reminders and Scheduling………………………………………………12
•
Employee Support…………………………………………………………..12
DRUG AND ALCOHOL TESTING……………………………………….12 - 14
•
Pre-Employment Testing………………………………………………….13
•
Pre-Employment Drug Screening………………………………………13
•
Random Testing………………………………………………………………13
•
Unannounced Random Drug Testing………………………………….13
•
Random Alcohol Testing…………………………………………………..13
•
Follow-Up Testing……………………………………………………………13
•
Follow-Up Drug and Alcohol Testing…………………………….13 - 14
•
Reasonable Suspicion Testing………………………………………….14

800-613-5903 | www.Citiguardinc.com
(cont’d.)
•
Drug and Alcohol Testing Based on Reasonable Suspicion……14 •
Compliance with Applicable Laws…………………………………….14
•
Compliance with State and Federal Regulations…………………14
ENSURING EMPLOYEES ARE CAPABLE…………………………..14 - 17
•
Rigorous Recruitment and Selection Process……………….14 - 15 •
Specialized Training Programs………………………………………….15
•
Continuous Professional Development………………………..15 - 16
•
Site-Specific Training………………………………………………………16
•
Regular Drills and Simulations………………………………………….16
•
Strong Supervision and Support………………………………………..16
•
Effective Communication and Collaboration…………………16 - 17

EMERGENCY PROCEDURES
………………………………….
17 - 25
•
Power Failure Procedures…………………………………………..17 - 18
800-613-5903 | www.Citiguardinc.com
(cont’d.)
•
Fire Evacuation……………………………………………………….18 - 20
•
Earthquake Evacuation…………………………………………….20 - 21
•
Abandoned/Suspicious Packages.…………………………….21 - 23
•
Bomb Treat…………………………………………………………….23 - 25
•
Active Shooter Response………………………………………….25 - 28

800-613-5903 | www.Citiguardinc.com
[1]
I
nitial
T
raining
P
rogram
New security personnel undergo
extensive training programs that
cover a wide range of topics,
including security protocols,
emergency procedures, legal
regulations, ethical conduct, and
customer service. These programs
are designed to equip employees with
the fundamental knowledge and
skills required for their roles.
c
ertification
v
erification
Citiguard conducts thorough checks to verify the certifications and licenses of new hires. This includes confirming the authenticity of security licenses, firearm permits, first aid/CPR certifications, and any other relevant qualifications. Only individuals with valid and verified certifications are employed.

R
egular
R
efresher
T
raining
Security personnel participate in regular refresher training sessions to reinforce their skills and knowledge. These sessions cover updates in security protocols, changes in regulations, and advancements in technology. Refresher training ensures that employees stay current with industry best practices.

C
ontinuous
E
ducation
Citiguard encourages security personnel to pursue continuous education opportunities. This can include advanced security training, higher education in related fields, or specialized certifications. The company supports and sometimes sponsors employees in these endeavors to enhance their skills and expertise.

800-613-5903 | www.Citiguardinc.com
[2]
R
egular
A
ssessments and
E
valuations
Security personnel undergo periodic assessments and evaluations to gauge their proficiency and identify areas for improvement. These assessments can include written tests, practical exercises, and scenario-based simulations. Performance evaluations are conducted by experienced trainers or supervisors.

H
ands-
O
n
T
raining
Citiguard provides hands-on training experiences to ensure that security personnel are proficient in using security equipment, handling emergencies, and executing their duties effectively. Practical exercises enhance their abilities to respond to real-life situations.

M
andatory
C
ontinuing
E
ducation
Citiguard enforces mandatory continuing education requirements for all security personnel. This includes staying updated on legal regulations, attending workshops or seminars, and completing online courses. Proof of completion is regularly verified to ensure compliance.

D
ocumentation and
R
ecords
Citiguard maintains detailed records of all training sessions, certifications, and assessments. These records serve as evidence of employee qualifications and training compliance. Documentation is regularly audited to ensure accuracy and completeness.

S
upervision and
M
entoring
Experienced supervisors provide guidance and mentorship to security personnel.

They offer on-the-job training, share best practices, and provide constructive feedback to enhance employees’ skills and confidence.
800-613-5903 | www.Citiguardinc.com
[3]
PC-832

A
rrest and
F
irearms
C
ourse
Hired guards either possess completed training or complete it within the first 30 days. The training comprises two components totaling a minimum of 64 hours: a 40-hour Arrest component and a 24-hour Firearms component for armed guards. • The Arrest component has a 40-hour requirement
• The Firearms component has a 24-hour requirement (Armed guards only).

C
lient
R
elations /
S
ervice
A
ttitude
New hires undergo training within their first 30 days, focusing on a client-centered approach, managing difficult clients, fostering client loyalty, and enhancing communication and writing skills.
• Client-Centered Approach
• Dealing with Angry/Upset Clients
• Importance of Client Loyalty / How to Nurture Relationships • Writing and Communication Skills
E
mergency
P
reparedness
All new hires receive training within
their initial 30 days, covering
concepts such as awareness,
mitigation, response, and recovery.

Training addresses various
emergency situations, including
antiterrorism, active shooter
incidents, HazMat incidents, crowd
control, and evacuation protocols.
• Antiterrorism

800-613-5903 | www.Citiguardinc.com
[4]
• Active Shooter
• HazMat
• Crowd Control
• Evacuation protocols
G
overnment
L
aws and
R
egulations
Applicants and new hires are tested on their understanding of federal and state laws governing security personnel. Ongoing training ensures compliance with evolving laws and regulations affecting security guards in California.

S
ecurity
P
atrol
P
rocedures
New hires receive training within the first 30 days, focusing on entrance/exit checks, observing suspicious behavior, ensuring people's safety, and being vigilant for emergencies.

C
itiguard
D
e-escalation
G
uidelines
At Citiguard, our foremost goal is to uphold a safe and secure environment for all. A cornerstone of our approach lies in mastering the art of de-escalation. These vital techniques have been proven to calm potentially volatile situations, thwart escalation, and defuse conflicts before they reach a dangerous point. Our specialized training program, meticulously crafted by our team of ex-law enforcement professionals, offers stringent guidelines on employing de-escalation tactics with precision in diverse situations.

1. Recognize Early Warning Signs:

Effective de-escalation starts with identifying early warning signs of aggression or conflict, including physical cues like clenched fists or tense body posture, and behavioral signs such as shouting, aggressive language, or threats. 800-613-5903 | www.Citiguardinc.com
[5]

2. Control Your Own Emotions:

Maintaining composure is crucial. Stay calm and composed in all situations, even under high pressure. Be mindful of your body language, tone of voice, and facial expressions, as they can either escalate or de-escalate a situation.

3. Build Rapport:

Establishing rapport and connecting with the individual you're dealing with can Foster trust and cooperation. Utilize active listening skills, ask open-ended questions, and show empathy to understand their perspective.

4. Clarify the Situation:

Before attempting to de-escalate, ensure a thorough understanding of the circumstances and the reasons behind the person's behavior. Clarify any misunderstandings or misconceptions, validating their feelings and emotions.

5. Set Boundaries:

Define clear boundaries and behavior expectations while ensuring the person feels respected and heard. Provide explicit instructions and consequences for non- compliance, while also offering practical solutions and alternatives to the situation.

6. Use Verbal and Non-Verbal Techniques:

De-escalation tactics encompass both verbal and
non-verbal approaches. Verbal
techniques involve using a calm and reassuring tone,
mirroring the person's
language and gestures, and providing choices and
options. Non-verbal techniques
include open body language, maintaining eye
contact, and establishing appropriate physical
distance.

7. Seek Assistance:

In situations where handling becomes challenging or there is a risk of physical harm, promptly seek assistance from other security personnel or law enforcement.

800-613-5903 | www.Citiguardinc.com
[6]
Have a well-defined escalation plan and know when to involve higher authorities to ensure a swift and safe resolution.

C
itiguard's
C
omprehensive
T
raining for
P
roactive
D
efense
While restraint is a fundamental aspect of a guard's security approach, it's crucial to acknowledge that emergency situations may require guards to face physical threats from antagonists. In these challenging scenarios, proactive defense strategies are paramount to ensuring safety and maintaining control. Citiguard security personnel are rigorously trained, prepared, and equipped with the following certifications:

1. Firearm Safety Certificate (Armed Guards Only):

Armed guard applicants must obtain this certification prior to employment. It Entails passing a rigorous Department of Justice (DOJ) written test on firearm safety, administered by DOJ Certified Instructors.

2. PR-24 Baton Certification:

All ACOs either possess PR-24 Baton Certification upon hiring or complete the Training within their initial 30 days of employment. This certification comprises a state-mandated course with a minimum of eight hours of instruction. A written examination, requiring a passing score of 83% or better, ensures proficiency.

3. Pepper Spray / Mace Permit:

ACOs are either hired with their pepper spray/mace permit or undergo Comprehensive training within their first 30 days of employment. This training encompasses legal and moral aspects, types of sprays, proper usage protocols, storage guidelines, and recognizing/treating symptoms associated with exposure.

4. Emergency Response Training:
• Types of Emergencies: Provide training on various types of emergencies such as fire, medical emergencies, natural disasters, and security breaches.
• Evacuation Procedures: Outline clear evacuation routes and procedures For different scenarios.
800-613-5903 | www.Citiguardinc.com
[7]
• First Aid and CPR: Ensure security personnel are trained in basic first aid And CPR to provide immediate assistance in medical emergencies.

5. Report Writing Training:
• Incident Reporting: Train security personnel to accurately and promptly report incidents, including details such as time, location, individuals involved, and actions taken.
• Documentation Skills: Emphasize clear and concise documentation of incidents, ensuring that reports are accessible for future reference.

6. Safety Training:
• Patrol Procedures: Instruct
on effective patrol
techniques to identify and
address potential safety
hazards.
• Security Equipment Usage:

Provide training on the
proper use of security
equipment such as
surveillance cameras,
alarms, and communication
devices.

7. Community Rules and Regulations:
• Familiarity with Community Policies: Ensure security personnel have a thorough understanding of community rules and regulations. • Conflict Resolution: Provide training on resolving conflicts while upholding community standards.

800-613-5903 | www.Citiguardinc.com
[8]

8. Procedural Training:
• Access Control Procedures: Train security personnel on verifying and controlling access to the community.
• Visitor Management: Instruct on proper procedures for handling and logging visitors to the community.
• Package Handling: Provide guidelines on receiving and handling packages, ensuring security and resident satisfaction.

9. Interpersonal Relationships:
• Customer Service Training: Emphasize the importance of good customer service in interactions with residents.
• Communication Skills: Train security personnel in effective communication to handle inquiries, complaints, and emergencies with professionalism.
• Cultural Sensitivity: Promote cultural awareness to foster positive relationships with a diverse resident population.

10. Ongoing Training and Drills:
• Regular Drills: Conduct regular emergency response drills to ensure security personnel are well-prepared.
• Continuing Education: Provide ongoing training to keep security personnel updated on new procedures, technologies, and community developments.

11. Hours of Training:
a. Orientation (4-8 hours):
800-613-5903 | www.Citiguardinc.com
[9]
• Introduction to the security company and its policies. • Overview of the security industry and the role of ACOs. • Introduction to basic security procedures and professionalism. b. Legal and Ethical Considerations (4-8 hours):
• Understanding relevant laws and regulations.
• Ethics in the security industry.
• Use of force and legal responsibilities.
c. Emergency Response Training (8-16 hours):
• First aid and CPR
certification.
• Emergency evacuation
procedures.
• Handling medical
emergencies.
d. Patrol and Observation (8-12 hours):
• Techniques for effective
patrolling.
• Observation skills and situational awareness.
• Identifying and reporting security threats.
e. Communication Skills (4-8 hours):

800-613-5903 | www.Citiguardinc.com
[10]
• Effective verbal and written communication.
• Radio communication procedures.
• Interacting with the public and residents.
f. Access Control and Technology (8-12 hours):
• Access control procedures.
• Proper usage of security equipment (e.g., surveillance cameras, alarms). • Technology training relevant to the security role.
g. Report Writing and Documentation (8-12 hours):
• Writing incident reports.
• Documentation skills and record-keeping.
• Legal considerations in report writing.
h. Customer Service (4-8 hours):
• Interacting with residents, visitors, and the public. • Conflict resolution and de-escalation techniques.
• Cultural sensitivity and diversity training.
i. Community Rules and Regulations (4-8 hours):
• Familiarity with community-specific rules.
• Enforcing rules while maintaining professionalism.
800-613-5903 | www.Citiguardinc.com
[11]
• Handling resident inquiries and complaints.
j. Practical Exercises and Drills (8-16 hours):
• Hands-on exercises to reinforce training.
• Emergency response drills.
• Simulations of common security scenarios.
k. Regular Refresher Courses: Implement regular refresher courses to reinforce skills and knowledge.

E

MPLOYEE
P

HYSICAL
E
XAMS
Citiguard prioritizes the health and physical well-
being of its employees through a structured
approach to conducting annual physical exams.

The company follows a systematic process to
ensure these exams are completed on schedule:

Pre-employment Medical Screening:

Before hiring, Citiguard requires candidates to
undergo a comprehensive pre-employment medical screening. This screening includes a thorough examination by a licensed medical professional. Candidates are assessed for their overall health, physical fitness, and ability to perform the required job duties.

Annual Physical Exams:

Citiguard mandates that all employees undergo a thorough physical examination on an annual basis. These exams are scheduled and coordinated by the company’s HR department. The purpose of these exams is to assess the employee’s general health, identify any potential health issues, and ensure that they are physically fit to continue their duties effectively.

800-613-5903 | www.Citiguardinc.com
[12]
Selection of Qualified Healthcare Providers:

Citiguard partners with qualified healthcare providers or medical facilities to conduct the physical exams. These providers are experienced in occupational health assessments and are capable of identifying health issues relevant to the specific job requirements of security personnel.

Standardized Medical Examination Protocol:

Citiguard ensures that the physical exams follow a standardized protocol. This protocol includes a range of tests and assessments such as blood pressure measurement, vision and hearing tests, cardiovascular health evaluation, musculoskeletal examination, and overall fitness assessment. The examination protocol is tailored to address the unique physical demands of security duties.

Documentation and Record-Keeping:

Citiguard maintains detailed records of each employee’s physical exams. These records include the results of the examination, any recommendations made by the healthcare provider, and the employee’s overall fitness status. Having accurate documentation allows Citiguard to track employees’ health over time and ensure timely follow-ups if necessary.

Reminders and Scheduling:

Citiguard implements a proactive approach to scheduling annual physical exams.

Employees receive timely reminders well in advance of their scheduled exam dates.

HR personnel assist in coordinating appointments, ensuring that every employee complies with the annual physical examination requirement.

Employee Support:

Citiguard offers support to employees during the physical examination process. This can include providing necessary information, addressing concerns, and ensuring that employees feel comfortable throughout the examination.

D

RUG AND
A
LCOHOL
T
ESTING
Citiguard maintains stringent policies and procedures regarding drug and alcohol testing to ensure a safe and drug-free work environment for its employees assigned to every post.
800-613-5903 | www.Citiguardinc.com
[13]
The company follows a comprehensive approach that includes pre-employment testing, random testing, and follow-up testing, as well as procedures for reasonable suspicion testing. Here are the details:

1. Pre-Employment Testing:

Pre-employment drug screening:

All candidates undergo mandatory drug
testing before they are officially hired by
Citiguard. This screening includes tests for
commonly abused substances to ensure
that prospective employees are drug-free.

Alcohol screening: Pre-employment
alcohol testing is also conducted to confirm that candidates do not have alcohol- related issues.

2. Random Testing:

Unannounced random drug testing:

Citiguard conducts random drug tests on employees throughout the year. This random approach deters substance abuse and ensures that employees are aware they can be tested at any time.

Random alcohol testing:

Similar to drug tests, random alcohol tests are administered without prior notice to selected employees, ensuring compliance with alcohol policies.

3. Follow-Up Testing:

Follow-up drug and alcohol testing:

Employees who have previously tested positive for drugs or alcohol, or have undergone rehabilitation, are subject to follow-up testing as part of their continued employment.

800-613-5903 | www.Citiguardinc.com
[14]
The frequency of follow-up testing is determined on a case-by-case basis, typically involving regular and unannounced tests to monitor ongoing sobriety and compliance with company policies.

4. Reasonable Suspicion Testing:

Drug and alcohol testing based on reasonable suspicion:

If there is reasonable suspicion that an employee may be under the influence of drugs or alcohol while on duty, Citiguard reserves the right to conduct drug and alcohol testing. Reasonable suspicion can be based on observed behavior, performance issues, or other specific indicators.

5. Compliance with Applicable Laws:

Compliance with state and federal regulations:

Citiguard ensures that all drug and alcohol testing procedures comply with relevant state and federal laws, including the guidelines set forth by the Department of Transportation (DOT) if applicable.

E

NSURING
E

MPLOYEES ARE
C
APABLE
Citiguard adopts a comprehensive and strategic methodology to guarantee its employees possess the requisite competencies to effectively deliver services as specified in the Statement of Work (SOW) for each contract. These services encompass safeguarding designated locations through specialized armed, unarmed, or vehicle patrol services. Key components of this approach include:

1. Rigorous Recruitment and Selection Process:
• Citiguard recruits experienced and qualified security personnel who Have a background in law enforcement, military, or private security. 800-613-5903 | www.Citiguardinc.com
[15]
• Candidates undergo a thorough screening process, including Background checks, interviews, and skills assessments to ensure they meet the necessary criteria and possess the requisite skills for the job.

2. Specialized Training Programs:
• Citiguard delivers thorough training programs meticulously designed to cater to the unique post orders of the facilities or locations to which its personnel are deployed. This training incorporates an expansive spectrum of subjects, encompassing emergency response protocols, access control procedures, conflict resolution strategies, surveillance techniques, and adherence to legal regulations.
• Armed guards receive specialized firearm training, ensuring they are proficient in the safe and responsible use of weapons. Vehicle patrol officers are trained in defensive driving techniques and patrolling methodologies.

3. Continuous Professional Development:
• Citiguard invests in the
continuous professional
development of its
employees. Ongoing
training sessions and
workshops keep security
personnel updated on the
latest security
technologies, industry
best practices, and legal
requirements.
• Employees are encouraged to pursue relevant certifications and attend Industry conferences, enhancing their knowledge and expertise in the field.

800-613-5903 | www.Citiguardinc.com
[16]

4. Site-Specific Training:
• Citiguard conducts site-specific training to ensure that employees are thoroughly acquainted with the distinct layout, security concerns, and crucial areas of each location to which they are assigned. • Security personnel are trained to handle various situations specific to The facilities they are assigned to, ensuring they are well-prepared to address any security-related issues that may arise.

5. Regular Drills and Simulations:
• Citiguard organizes regular drills and simulations to assess the Readiness and response capabilities of its security personnel. • These exercises include scenarios related to intruder detection, emergency evacuations, and coordination with law enforcement agencies, allowing employees to practice their skills in a controlled environment.

6. Strong Supervision and Support:
• Citiguard maintains a robust supervisory system where experienced supervisors provide guidance, support, and oversight to security personnel.
• Supervisors conduct regular site visits to monitor the performance of security officers, ensuring that they adhere to protocols and maintain a high level of professionalism.

7. Effective Communication and Collaboration:
• Citiguard emphasizes open communication and collaboration among Security personnel, ensuring seamless coordination during patrols, emergencies, and shift changes.
800-613-5903 | www.Citiguardinc.com
[17]
• Security officers are trained to effectively communicate with each other and with other relevant parties, fostering a cohesive and efficient security team.

E

MERGENCY
P

ROCEDURES
Power Failure Procedures: Citiguard prioritizes thorough training on power failure procedures for our clients to ensure preparedness and effective response during such incidents. Our training program covers a range of essential topics to equip Security Staff with the knowledge and skills needed to mitigate
risks and maintain security in the event of a power
outage.

1. Understanding Power Systems: We provide detailed insights into the building (s) power infrastructure, including main power sources, backup generators, and emergency lighting systems. Understanding these systems enables Security Staff to identify potential vulnerabilities and respond accordingly.

2. Response Protocols: Our training emphasizes clear protocols for responding to power failures, including immediate actions to ensure the safety of everyone. This includes procedures for evacuating buildings safely if necessary and establishing communication channels with emergency services.

3. Emergency Lighting Usage: Proper utilization of emergency lighting is crucial during power outages. We train Security Staff on how to locate and activate emergency lighting systems to maintain visibility in critical areas such as corridors, stairwells, and exits.

4. Security Measures: In the event of a power failure, security measures must be adapted to maintain the safety and integrity of the premises. Our training covers strategies for securing entrances, monitoring vulnerable areas, and deploying additional Security Staff if needed.

800-613-5903 | www.Citiguardinc.com
[18]

5. Communication Protocols: Effective communication is essential during power outages to coordinate responses and provide updates to relevant stakeholders. We instruct Security Staff on how to establish communication channels using alternative methods such as two-way radios or mobile phones.

6. Equipment Operation: Some security equipment may rely on power sources that are affected during outages. Our training includes instructions on how to operate backup systems or alternative equipment to ensure continuous monitoring and surveillance.

7. Mock Drills and Scenario-Based Training: Practical exercises and simulated scenarios are integral parts of our training program. By conducting mock drills, Security Staff can practice implementing power failure procedures in a controlled environment, allowing for refinement and improvement of response protocols.

8. Continuous Education and Updates: As part of our commitment to ongoing improvement, we provide regular updates and refresher training sessions to ensure that Security Staff remain current with best practices and any changes to procedures or equipment.

Fire Evacuation Procedures: Citiguard places great emphasis on training clients in fire evacuation procedures to ensure the safety of all occupants during emergencies. Our comprehensive training program equips Security Staff with the knowledge, skills, and confidence needed to respond effectively in the event of a fire.

Here are the key components of our fire evacuation training:

1. Understanding Fire Risks: We educate Security Staff about common fire hazards and risks specific to their facility. This includes identifying potential ignition sources, flammable materials, and areas with a high risk of fire occurrence.

2. Fire Alarm Systems: Training covers the operation and response to fire alarm systems installed on the premises. Security Staff learn how to recognize different alarm signals, activate alarm systems, and respond promptly upon hearing an alarm. 800-613-5903 | www.Citiguardinc.com
[19]

3. Emergency Exits and Evacuation Routes: We ensure that Security Staff are acquainted with the whereabouts of emergency exits, evacuation routes, and assembly points. This training encompasses identifying both primary and secondary evacuation routes and ensuring unobstructed access to exits at all times.

4. Evacuation Procedures: Security Staff are trained on the steps to take when evacuating the building during a fire. This includes calmly directing occupants to the nearest exit, assisting individuals with disabilities or special needs, and ensuring orderly evacuation without causing panic.

5. Emergency Communication: Effective communication is critical during fire evacuations. We instruct Security Staff on how to raise the alarm, notify emergency services, and communicate evacuation instructions to all occupants using designated communication methods such as intercoms or two-way radios.

6. Fire Suppression Equipment: Training includes instruction on the safe and proper use of fire suppression equipment such as fire extinguishers, hoses, and blankets.

Security Staff learn how to assess whether it is safe to attempt to extinguish a fire and when to evacuate instead.

7. Accounting for Occupants: Security Staff are trained to account for all occupants during evacuations, particularly vulnerable individuals such as children, elderly persons, or those with mobility impairments. This includes conducting roll calls at assembly points and reporting any missing persons to emergency responders.

8. Mock Drills and Scenario-Based Training: Practical exercises and simulated fire scenarios are conducted regularly to reinforce training and allow Security Staff to practice evacuation procedures in a controlled environment. These drills provide valuable experience and help identify areas for improvement.

800-613-5903 | www.Citiguardinc.com
[20]

9. Post-Evacuation Procedures: After evacuating the building, Security Staff are trained on post-evacuation procedures such as assisting emergency responders, providing information about the incident, and conducting debriefings to review the evacuation process and identify lessons learned.

10. Continuous Education and Updates: Our commitment to ongoing education ensures that Security Staff receive regular updates and refresher training on fire evacuation procedures, including any changes to protocols or evacuation routes.

Earthquake Evacuation Procedures: Citiguard's earthquake evacuation training for clients is meticulously designed to equip individuals with the knowledge and skills needed to respond swiftly and effectively during seismic events. Here are the comprehensive details of Citiguard's earthquake evacuation training program:

1. Understanding Earthquake Risks: Clients are educated about the seismic risks specific to their geographical location and facility. They learn about the potential impact of earthquakes on structures, utilities, and infrastructure, as well as the likelihood of aftershocks.

2. Seismic Hazard Identification: Training includes instruction on identifying hazards within the facility that may pose risks during an earthquake, such as unsecured objects, heavy furniture, and glass windows. Clients learn how to mitigate these hazards to minimize potential injuries.

3. Drop, Cover, and Hold On Protocol: Clients are trained on the internationally recognized safety protocol of "Drop, Cover, and Hold On" during an earthquake. They learn to drop to the ground, take cover under a sturdy object, and hold on until the shaking stops to protect themselves from falling debris.

4. Emergency Communication: Effective communication strategies during and after an earthquake are emphasized. Clients learn how to use designated communication channels to notify occupants about the earthquake, provide instructions for evacuation, and relay information to emergency responders. 800-613-5903 | www.Citiguardinc.com
[21]

5. Evacuation Routes and Assembly Points:

Detailed evacuation plans are provided,
highlighting primary and alternate evacuation
routes, as well as designated assembly points
outside the facility. Clients learn how to guide
occupants safely to these locations while avoiding
hazards such as damaged structures or fallen
debris.

6. Assisting Vulnerable Individuals: Procedures are outlined for assisting vulnerable individuals, including the elderly, disabled, or injured, during evacuation. Clients learn how to prioritize the safety of these individuals and provide appropriate assistance based on their needs.

7. Post-Earthquake Procedures: Clients receive guidance on post-earthquake procedures, including conducting safety assessments of the facility, checking for gas leaks or structural damage, and providing first aid to injured individuals. They also learn how to initiate emergency response protocols and communicate with authorities if necessary.

8. Mock Drills and Scenario-Based Training: Practical exercises and simulated earthquake scenarios are conducted regularly to reinforce training and allow clients to practice evacuation procedures in a controlled environment. These drills help identify areas for improvement and familiarize individuals with the appropriate response actions.

9. Continuous Education and Updates: Citiguard emphasizes the importance of ongoing education by providing regular updates and refresher training on earthquake evacuation procedures. Clients are informed of any changes to protocols or evacuation routes and encouraged to stay informed about earthquake preparedness measures.

800-613-5903 | www.Citiguardinc.com
[22]
Abandoned/Suspicious Packages: Citiguard's training for identifying and responding to abandoned or suspicious packages is crucial for ensuring the safety and security of our clients' facilities. Here are the detailed components of Citiguard's training program on this matter:

1. Recognition of Abandoned or Suspicious Packages: Clients are trained to recognize signs of abandoned or suspicious packages, including unusual appearance, unexpected location, lack of identification, leaking substances, or protruding wires.

They learn to trust their instincts and report any concerns immediately.

2. Initial Response Protocol: Upon discovering an abandoned or suspicious package, clients are instructed to maintain a safe distance and avoid touching or moving the package. They learn to alert nearby individuals and evacuate the area if necessary, following established evacuation routes and assembly points.

3. Emergency Communication Procedures: Effective communication is paramount during such situations. Clients are trained on the importance of promptly reporting the discovery of abandoned or suspicious packages to designated authorities, such as Security Staff, law enforcement, or emergency services. They learn the appropriate channels and methods for reporting, including emergency hotlines or radio communications.

4. Establishment of Perimeter and Isolation Zone: Clients learn to establish a safe perimeter around the suspicious package to prevent unauthorized access and ensure the safety of bystanders. They are trained to cordon off the area and create an isolation zone to minimize the risk of harm in case of an explosion or hazardous substance release.

5. Documentation and Observation: Detailed documentation of the suspicious package and surrounding area is emphasized. Clients are trained to record essential details, such as the package's size, shape, color, and any identifying features, as well as the circumstances of its discovery. They are also instructed to observe and report any suspicious individuals or activities in the vicinity. 800-613-5903 | www.Citiguardinc.com
[23]

6. Coordination with Authorities: Clients receive guidance on coordinating with law enforcement, bomb squads, or hazardous materials teams to assess and address the situation. They learn to provide accurate and timely information to assist authorities in their investigation and response efforts.

7. Evacuation and Shelter-in-Place Procedures: Depending on the nature of the threat, clients are trained on appropriate evacuation or shelter-in-place procedures. They learn to prioritize the safety of occupants and follow established protocols for relocating to safe areas or remaining indoors until authorities provide further instructions.

8. Mock Drills and Scenario-Based Training: Practical exercises and simulated scenarios are conducted regularly to reinforce training and familiarize clients with the appropriate response actions. These drills help build confidence, identify areas for improvement, and ensure readiness in real-life situations.

9. Continuous Education and Updates: Citiguard emphasizes the importance of ongoing education by providing regular updates and refresher training on identifying and responding to abandoned or suspicious packages. Clients are encouraged to stay vigilant and informed about emerging threats and best practices in security.

Bomb Threat Procedures: Citiguard's training for bomb threat procedures equips clients with the knowledge and skills necessary to effectively respond to and mitigate the risks associated with bomb threats. Here are the detailed components of Citiguard's training program on this matter:

1. Recognition of Bomb Threat Indicators: Clients are trained to recognize common indicators of a bomb threat, including suspicious packages, unusual behavior from individuals, and anonymous threats via phone calls, emails, or written messages.

800-613-5903 | www.Citiguardinc.com
[24]
They learn to remain vigilant and report any suspicious activity immediately.

2. Initial Response Protocol: Upon receiving a bomb threat, clients are instructed to remain calm and follow established protocols. They learn to take threats seriously and immediately notify designated authorities, such as Security Staff, law enforcement agencies, or emergency services. Clients are trained to provide detailed information about the threat, including the location, nature of the threat, and any specific instructions provided by the caller or sender.

3. Emergency Communication Procedures: Effective communication is critical during bomb threat situations. Clients are trained on the importance of promptly reporting threats and communicating with relevant authorities using designated channels, such as emergency hotlines or radio communications. They learn to maintain clear and concise communication to ensure swift response and coordination.

4. Evacuation and Shelter-in-Place Protocols: Depending on the nature of the threat and guidance from authorities, clients are trained on appropriate evacuation or shelter-in-place procedures. They learn to prioritize the safety of occupants and follow established evacuation routes to evacuate the premises safely. In cases where evacuation is not feasible, clients are instructed on shelter-in-place protocols to minimize exposure to potential hazards.

5. Search and Sweep Procedures: Clients receive training on conducting systematic searches of their premises to identify any suspicious objects or packages. They learn to follow predefined search patterns and techniques while maintaining a safe distance from potential explosive devices. Clients are also trained to report any suspicious findings to designated authorities for further investigation.

6. Establishment of Perimeter and Isolation Zones: In the event of a bomb threat, clients learn to establish a secure perimeter around the affected area to prevent unauthorized access and ensure the safety of bystanders. They are trained to cordon off the area and create isolation zones to minimize the risk of harm in case of an explosion.
800-613-5903 | www.Citiguardinc.com
[25]

7. Coordination with Authorities: Clients receive guidance on coordinating with law enforcement agencies, bomb squads, or hazardous materials teams to assess and address the threat. They learn to provide accurate and timely information to assist authorities in their response efforts and follow instructions provided by law enforcement personnel.

8. Mock Drills and Scenario-Based Training: Practical exercises and simulated scenarios are conducted regularly to reinforce training and familiarize clients with the appropriate response actions. These drills help build confidence, identify areas for improvement, and ensure readiness in real-life situations.

9. Continuous Education and Updates: Citiguard emphasizes the importance of ongoing education by providing regular updates and refresher training on bomb threat procedures. Clients are encouraged to stay informed about emerging threats and best practices in security to enhance their preparedness and response capabilities.

Active Shooter Response: Trained by off-duty Los Angeles law enforcement officers and implementing stringent protocols, Citiguard's elite security personnel exemplify excellence in promptly and efficiently addressing active shooter incidents.

Our unwavering commitment is to prioritize the safety and well-being of all individuals involved. Below, we present an overview of Citiguard's comprehensive procedures for managing such critical incidents:

1. Evacuation Protocol:
• Evacuate immediately if a clear path to safety exists: When faced with an active shooter situation, the priority is to get yourself
and others to safety as quickly as possible.
• Have an evacuation plan and route ready:

Familiarize yourself with evacuation routes and
designated safe areas in advance to facilitate
swift and organized evacuation.

800-613-5903 | www.Citiguardinc.com
[26]
• Assist others in evacuating and prevent access to dangerous areas: Help guide and support individuals who may need assistance in evacuating, and ensure that no one enters areas where the shooter may be present. • Keep hands visible and comply with law enforcement instructions: Law enforcement personnel need to distinguish between potential threats and civilians. Keep your hands visible and follow instructions carefully to avoid being mistaken for the shooter.

2. Hiding Protocol:
• Find a hiding place away from the shooter’s view if evacuation is not possible: If evacuation is not feasible, seek shelter in a secure location away from the shooter’s line of sight.
• Choose locations with protection from gunfire and ensure you’re not trapped:

Select hiding spots that provide physical barriers, such as solid walls or furniture, to shield you from gunfire. Ensure that your hiding place allows for freedom of movement and escape if necessary.
• Secure doors and barricade entry points with heavy objects: Take proactive measures to fortify your hiding place by securing doors and barricading entry points with heavy objects to impede the shooter’s access.

3. Proactive Duties (Role in Immediate Risk Situations): In situations where occupants’ safety is immediately threatened by an active shooter, prioritize safety by avoiding direct engagement with the shooter.
• Secure yourself in a safe area and provide real-time information to local law enforcement, including the shooter’s location, description, and any other relevant details.
• Enable law enforcement to employ tactical strategies effectively to neutralize the threat while minimizing harm to occupants.
800-613-5903 | www.Citiguardinc.com
[27]

4. Interaction with Law Enforcement:
• Stay calm and composed when interacting with law
enforcement officers.
• Keep your hands visible at all times and avoid making sudden movements.
• Provide law enforcement with accurate and timely
information about the situation, including the number of shooters, their location, and any weapons they may
possess.

5. Training Client Staff (Emergency Action Plan Development):
• Collaborate with stakeholders to develop a comprehensive Emergency Action Plan tailored to the specific needs and layout of the facility. • Conduct regular training exercises and mock drills to familiarize client staff with the Emergency Action Plan and ensure they are prepared to respond effectively in an active shooter situation.
• Train client staff to recognize the sound of gunshots, assess threats quickly, and take decisive action to protect themselves and others. • Provide instruction on how to effectively communicate with law enforcement, emergency responders, and other stakeholders during an active shooter incident.
• Emphasize the importance of maintaining a survival mindset and remaining calm under pressure.

6. Preparation and Prevention to Maximize Safety:
• Establish multiple evacuation routes throughout the facility and clearly mark them to ensure easy identification during emergencies.

800-613-5903 | www.Citiguardinc.com
[28]
• Implement preventive measures such as access controls, surveillance systems, and visitor screening procedures to deter potential threats and enhance security.

7. Recognizing and Managing Workplace Violence:
• Train client staff to recognize warning signs of potential workplace violence, including behavioral changes, verbal threats, or hostile actions. • Implement reporting protocols to encourage the prompt reporting of suspicious behavior or security concerns to appropriate authorities for investigation and intervention.

8. Managing Post-Incident Consequences:
• Conduct thorough post-event assessments to evaluate the effectiveness of response efforts and identify areas for improvement.
• Provide support and assistance to individuals affected by the incident, including counseling services, debriefing sessions, and follow-up care as needed.

9. Filling Operational Gaps:
• Identify any deficiencies or shortcomings in personnel, procedures, or equipment that may have been exposed during the active shooter incident. • Take proactive steps to address and rectify these gaps, such as updating training protocols, enhancing communication systems, or augmenting security measures, to improve preparedness and response capabilities for future incidents.

A
t
C
itiguard,
y
our
s
afety
i
s
o
ur
p
riority,
a
nd
o
ur
p
ersonalized
t
raining
e
nsures
y
ou're
a
lways
p
repared
t
o
h
andle
e
mergencies
c
onfidently
a
nd
e
ffectively.

Company Name CDD Rating LCS Rating PW Rating PD Rating Average Citiguard 91.46 80.46 88.46 90.46 87.71
Aventus Security 93.13 76.13 87.13 92.13 87.13
SafeRock 92.70 69.70 90.70 93.70 86.70
Nguyen Security Services 90.14 73.14 91.14 89.14 85.89
786 Hastrust Inc 89.00 85.00 87.00 82.00 85.75
Condor Security of America 88.28 75.14 89.29 89.32 85.51 Good Guard 87.44 81.44 85.44 87.44 85.44
Secure Guard 87.08 84.08 85.08 79.08 83.83
Assest Private Security 75.34 85.45 80.39 73.52 78.68
American Global Security 89.01 68.01 88.01 67.01 78.01
Scaife Protection Services 76.12 85.12 75.12 74.12 77.62 Allied Universal 79.73 73.66 89.84 60.86 76.02
HKC Protective Services 79.48 81.00 72.48 64.48 74.36
Access Control Security 82.20 65.20 77.20 72.20 74.20
Veterans High Risk Security 75.55 76.55 72.55 68.55 73.30 OPS Inc. Security 76.05 71.05 74.05 68.05 72.30
Crime Shield Private Security 68.52 69.53 70.54 57.77 66.59 Orion Security 59.92 76.92 67.92 53.92 64.67
Lotus USA 62.17 51.17 65.17 60.17 59.67
Defensa Private Security 52.55 57.55 57.55 53.55 55.30
UPSI 36.00 52.00 38.00 32.00 39.50
Sure Patrol Services 1.00 20.00 5.00 0.00 6.50
City of Salinas
Legislation Text
200 Lincoln Ave., Salinas,
CA 93901
www.cityofsalinas.org
File #: ID#25-485, Version: 1
Fire Apparatus Purchase and Lease Financing
Approve a Resolution authorizing the direct purchase and/or lease financing of two (2) Type 1 Fire Engines, one (1) Tiller Ladder Truck, and one (1) BME Type 6 Wildland Engine from Golden State Fire Apparatus, Inc, including all associated equipment, installation, and performance bonds, in an amount of $5,404,476.31 and a 5% contingency ($270,223.82), excluding financing costs; authorizing the use of proceeds from a sale of City surplus property located at 342 Front Street and 323 California Street to fund a portion of the fire apparatus purchases; and authorizing the City Manager to execute agreements all related purchase agreements, lease- purchase or financing documents, and any necessary amendments to or change orders required to complete the purchase.

City of Salinas Printed on 12/5/2025Page 1 of 1
powered by Legistar™

Page | 1

CITY OF SALINAS

COUNCIL STAFF REPORT

DATE: DECEMBER 9, 2025
DEPARTMENT: FIRE DEPARTMENT
FROM: SAMUEL P. KLEMEK, FIRE CHIEF
BY: ESTEFANIA VARGAS, MANAGEMENT ANALYST
TITLE: FIRE APPARATUS PURCHASE AND LEASE FINANCING

RECOMMENDED MOTION:

A motion to approve a Resolution:

1. Authorizing the direct purchase and/or lease financing of two (2) Type 1 Fire Engines, one (1) Tiller Ladder Truck, and one (1) BME Type 6 Wildland Engine from Golden State Fire Apparatus, Inc, including all associated equipment, installation, and performance bonds, in an amount of $5,404,476.31 and a 5% contingency ($270,223.82) , excluding financing costs;

2. Authorizing the use of proceeds from a sale of City surplus property located at 342 Front Street and 323 California Street to fund a portion of the fire apparatus purchases; and

3. Authorizing the City Manager to execute agreements all related purchase agreements, lease-purchase or financing documents, and any necessary amendments to or change orders required to complete the purchase.

EXECUTIVE SUMMARY:

The Salinas Fire Department is requesting approval to purchase two Pierce Enforcer Type 1 fire engines, one Pierce tiller ladder truck, and one BME Type 6 wildland engine from Golden State Fire Apparatus. The purchases will be made through cooperative cont ract agreements with Sourcewell and HGAC Buy, in compliance with Salinas City Code Section 12-27. Staff recommends a combination of lease equipment financing and direct purchase, utilizing funds from the sale of City surplus property located at 342 Front Street and 323 California Street and financing $3,005,730.

BACKGROUND:

The Fire Department has been working diligently to bring its fleet into a state of good repair and maintain a fire apparatus and vehicle replacement program consistent with best practices. To Commented [CC1]: Why would we need to specify this when this funding is a part of the general fund?
Commented [SA2R1]: Rene - I agree with Chris. We don’t need this authority but based on council comments during this item, they may wonder if it’s available for another purpose. Other surplus sales just go back to the general fund. I defer to you whether we keep this or remove it.

Page | 2
achieve this goal, the department requires the replacement of two fire engines and one tiller ladder truck, as well as replacing the existing Type 3 wildland vehicle with two Type 6 models to improve access to hard -to-reach wildland areas . O ne Type 6 unit has already been ordered. The Fire Department’s replacement program calls for rotating front -line engines every 8 – 10 years and aerial trucks every 15 years, consistent with use and in line with National Fire Protection Association standards (NFPA).

Staff plans to house one (1) Type 1 Fire Engine at Station 2 and another at Station 3, one (1) Tiller Ladder Truck at Station 5, and one (1) BME Type 6 Wildland Engine at either Station 1 or Station

5. This deployment may change based on operational needs and the utilization of additional engines.

On September 23, 2025, Council approved the sale of City surplus property located at 342 Front Street and 323 California Street to the Monterey County Office of Education in the amount of $2,500,000. Staff recommends using $1,656,088 to purchase one Type 1 Fire Engine and the BME Type 6 Wildland Engine. The second Type 1 Fire Engine and the Tiller Ladder Truck will be acquired through lease equipment financing.

On December 2, 2025, this item was presented to the Finance Committee. Committee members asked clarifying questions and moved to recommend the acquisition of the four fire apparatuses to City Council.

Proposals have been obtained from Golden State Fire Apparatus. Delivery is expected within 36 months for the Type 6, up to 51 months for the engines and up to 49 months for the tiller. Purchases will be made through Sourcewell and HGAC Buy cooperative contracts under Salinas City Code §12-27 through the recommended direct purchase and/or lease-purchase financing.

The City modeled three purchase and financing options.

• Scenario 1 includes a prepayment discount of $742,658 and the use of surplus land sale proceeds. This scenario has an estimated financing amount of $3,005,730 and an estimated annual payment of $378,281.

• Scenario 2
includes no prepayment discount , the use of surplus land sale proceeds, and requires payment on delivery. This scenario has an estimated financing amount of $3,748,388 and an estimated annual payment of $475,878.

• Scenario 3 i ncludes a prepayment discount of $742,658 and does not include proceeds from the surplus land sale. This scenario has an estimated financing amount of $4,661,818 and an estimated annual payment of $583,294. Financing a larger amount results in higher interest costs which would ultimately reduce the City’s general fund capacity in future years.

Commented [CC3]: Same comment as above: I do not
understand why we would need to call this out in this way. I defer to Rene and Selina, though.

Commented [SA4R3]: Same response as above.

Page | 3

CEQA CONSIDERATION:

Not a Project . The City of Salinas has determined that the proposed action is not a project as defined by the California Environmental Quality Act (CEQA) (CEQA Guidelines Section 15378).

CALIFORNIA GOVERNMENT CODE §84308 APPLIES:

Yes.

STRATEGIC PLAN INITIATIVE:

This item achieves the City Council 2025 Strategic Goal of Public Safety.

DEPARTMENTAL COORDINATION:

The Fire Department will collaborate with City Attorney to ensure all contracts comply with applicable laws and ordinances and with Finance to seek the most appropriate direct purchase and/or lease option and while adhering to the City of Salinas procurement policies.

FISCAL AND SUSTAINABILITY IMPACT:

Staff recommends using proceeds from the surplus land sale to purchase two apparatuses and finance the remaining two over a 10-year period, through either a prepayment option (Scenario 1) or a pay on delivery option (Scenario 2), as show n below. Use of the surplus land proceeds is in alignment with this purchase as it would reduce the City’s future debt service allowing additional capacity for other important services or projects.

Scenario 3 identifies the estimated annual cost to the City should the surplus land proceeds not be used. As evidenced below, the estimated annual payment for this option is the highest.

Fund General Ledger Number
(Operating/CIP)
General Ledger Account
Name
Remaining Budget
Appropriation
Amount Requested
7121 45.4510-66.5500

Capital Outlays Vehicles N/A $1,656,088 (proceeds
from surplus land sale)
7121 45.4510-65.1030

45.4510-65.2030
Principal
Interest
N/A $378,281 Annually
(Scenario 1 beginning
6/1/26 – thru 12/31/25)
Scenario 1:

Prepay with
Land Sale Proceeds
Scenario 2:

Pay on Delivery with
Land Sale Proceeds
Scenario 3:

Prepay without use of
Land Sale Proceeds
Fire Apparatus (4) 5,404,476 5,404,476 5,404,476
Less: Prepayment Discount -742,658 0 -742,658
Total Vehicle Purchase Costs 4,661,818 5,404,476 4,661,818 Less: Proceeds from Surplus Land Sale -1,656,088 -1,656,088 Financed Amount 3,005,730 3,748,388 4,661,818
Page | 4
7121 45.4510-65.1030

45.4510-65.2030
Principal
Interest
N/A $475,878 Annually
(Scenario 2 beginning
upon delivery for 10
years)
7121 45.4510-65.1030

45.4510-65.2030
Principal
Interest
N/A $583,294 Annually
(Scenario 3 beginning
6/1/26 – thru 12/31/25)

ATTACHMENTS:

Resolution
Pumper Proposal Package
Type 6 Proposal Package
Tiller Proposal Package
Page | 1

RESOLUTION NO. (N.C.S.)

A RESOLUTION AUTHORIZING THE PURCHASE AND FINANCING OF FIRE

APPARATUS

WHEREAS, the Salinas Fire Department has been working diligently to bring our fleet into a state of good repair and maintain a fire apparatus and vehicle replacement program consistent with best practices. To achieve this goal, the department requires the replacement of two fire engines and one tiller ladder truck, along with the addition of a Type 6 wildland vehicle to improve access to hard-to-reach wildland areas; and
WHEREAS, Golden State Fire Apparatus, Inc. has provided proposals for the purchase of two Pierce Enforcer Type 1 engines, one Pierce tiller ladder truck, and one BME Type 6 “Sawtooth” wildland engine for a combined total cost of approximately $5,404,476.31 excluding financing costs; and
WHEREAS, these purchases will be made through cooperative purchasing agreement consistent with Salinas City Code §12-27, which permits direct procurement through approved cooperative purchasing programs; and
WHEREAS, the City of Salinas intends to finance the total cost through a lease-purchase agreement and such financing may include prepayment and contingency provisions; and WHEREAS, the City Manager is authorized to execute all necessary agreements and financing documents to complete the purchase, including a contingency amount of up to five (5) percent ($270,223.82) to cover unforeseen costs or contractual adjustments.

NOW, THEREFORE, BE IT RESOLVED that the Salinas City Council:

1. Authorizes the direct purchase and/or financing of two (2) Pierce Enforcer Type 1 fire engines, one (1) Pierce tiller ladder truck, and one (1) BME Type 6 wildland engine from Golden State Fire Apparatus, Inc., for an estimated amount of $5,404,476.31, plus a contingency amount of up to five percent (5%), or $270,223.82, excluding financing costs;

2. Authorizes the use of proceeds from the sale of City surplus property located at 342 Front Street and 323 California Street to fund a portion of the fire apparatus purchases; and

3. Authorizes the City Manager to execute all related purchase agreements, lease-purchase or financing documents, and any necessary amendments or change orders required to complete the purchases.

PASSED AND APPROVED this 9th day of December, 2025, by the following vote:

AYES:

NOES:

Page | 2

ABSENT:

ABSTAIN:

APPROVED:

_______________________
Dennis Donohue, Mayor

ATTEST:

_________________________
Patricia M. Barajas, City Clerk

PREPARED ESPECIALLY FOR:

CITY OF SALINAS

Two (2) Pierce Manufacturing, Inc.

Enforcer 1500 GPM Type 1 Fire Engines

Product Proposal
Standard Terms and Conditions (Exhibit A)
Product Specifications (Exhibit B)
▪ Supporting Documents (If Applicable)
◦ Electrical Analysis
◦ Turning Radius Report
Product Warranties (Exhibit C)
Dealer Supplied Products and/or Services (Exhibit D)

TABLE OF CONTENTS
1 2
3 4
5 goldenstatefire.com
JROGHQVWDWHĆUHFRP

PRODUCT
PROPOSAL1

OPTION A
100% PRE-PAYMENT

This will be the price of the Product(s)
contingent upon the Customer paying the
Grand Total Purchase Price to GSFA within
thirty (30) calendar days of the Executed Date
pursuant to the Payment Terms

Please note this discount is also available contingent upon a Third Party (Leasing Company) paying 100% of the Grand Total Purchase Price on behalf of the Customer to GSFA within thirty (30) calendar days of the Executed Date pursuant to the Payment Terms

IF YOU ELECT THIS OPTION,

IT RESULTS IN A SAVINGS OF
($355,830.28) OFF

OF THE GRAND TOTAL OF OPTION B

goldenstatefire.com

7400 Reese Road, Sacramento, CA 95828 | 916.330.1638

PRODUCT PROPOSAL FOR:

City of Salinas
65 W. Alisal Street, Suite 210
Salinas, CA 93901
Sales Consultant
Dewayne Young
[email protected]
Mobile: (209) 777-0650

Golden State Fire Apparatus, Inc. (“GSFA”) is pleased to provide this proposal for the fire apparatus(es) and equipment identified below (the " Product”) to CITY OF SALINAS (“Customer ”) for consideration. This proposal (this “ Product Proposal ”) includes the following exhibits attached hereto: the Standard Terms and Conditions attached as Exhibit A (the “Terms and Conditions ”); the Product Specifications attached as Exhibit B (the “Specifications ”); the Product Warranties attached as Exhibit C; and the Dealer Supplied Products and/or Services attached as Exhibit D (the “Dealer Supplied Products/Services List ”) (all of the foregoing, collectively, the “ Agreement”). Through its signature below or other Acceptance (as defined on page 2), Customer acknowledges having received and read, and agrees to be bound by, the Agreement. The Agreement shall be effective as of the latest date appearing in the signature blocks below (the “ Executed Date”).

PAYMENT TERMS – Customer shall pay the total purchase price set forth directly above (the “ Grand Total Purchase Price”) to GSFA within thirty (30) calendar days of the Executed Date. If payment of the Grand Total Purchase Price is late, a late fee as sp ecified in section 6 of the Terms and Conditions may be applied, and the Prepayment Discount may be adjusted, and the Gr and Total Purchase Price increased in accordance with section 2.c of the Terms and Conditions. Customer shall pay any balance due as a result of Change Orders as described in the Terms and Conditions.

MANUFACTURER – Customer acknowledges that GSFA is not an agent of the Product manufacturer identified above (“Manufacturer”) and is not capable of binding Manufacturer. Within five (5) business days of the Executed Date, GSFA shall submit an order form to the Manufacturer for the Product. GSFA’s further performance under the Agreement is contingent upon Manufacturer’s acceptance of such order form at the price and on the terms GSFA believed to be available when submitting this Product Proposal to Customer. If Manufacturer rejects such order as submitted or fails to respond to GSFA within a reasonable SUBMITTED DATE EXPIRATION DATE GSFA PROPOSAL # MANUFACTURER BID # MANUFACTURER CONSORTIUM 11/12/2025 01/09/2026 31112-25AP 969 Pierce
Manufacturing Inc.

Sourcewell #113021-
OKC, ID #259,
Member #2424

ITEM PRODUCT DESCRIPTION EXTENDED PRICE
A Two (2) Pierce Manufacturing, Inc. Enforcer 1500 GPM Type 1 Fire Engines 2,232,864.00 B Discount for 100% Payment at Time of Order (the “Prepayment Discount”) (325,322.00) C SUBTOTAL 1,907,542.00
D 9.25% State Sales Tax 176,447.64
E California Tire Fee 21.00
F 100% Performance Bond 2,840.00
G GRAND TOTAL PURCHASE PRICE 2,086,850.64

goldenstatefire.com

7400 Reese Road, Sacramento, CA 95828 | 916.330.1638
amount of time, GSFA shall notify Customer in writing, and unless GSFA and Customer otherwise agree in writing , the Agreement shall then terminate and have no further force or effect.

PRODUCT COMPLETION – The Product shall be ready for final inspection by Customer at the manufacturing facility within approximately 48 to 51 MONTHS after the Executed Date. The foregoing estimate is provided as a good faith approximation as of the date of submission of this Product Proposal and is subject to the Terms and Conditions.

PREDELIVERY SERVICE – If applicable, after transportation from the manufacturing facility and prior to final delivery or pick up, the Product shall receive those additional Products and/or services identified on the Dealer Supplied Products/Services List. It is estimated that such a service will add approximately 0.5 to 1.5 MONTH(S) to the above Product completion estimate. The foregoing estimate is provided as a good faith approximation as of the date of submission of this Product Proposal and is subject to the Terms and Conditions.

PROPOSAL EXPIRATION – This Product Proposal supersedes any previous proposal(s) presented to Customer by GSFA and its employees and may be accepted by Customer on or before the Expiration Date identified above. Unless accepted by the Expiratio n Date, GSFA reserves the right to withdraw this Product Proposal or to alter its terms (including by providing updated Product pricing) prior to an order being accepted.

PURCHASE ORDER – Any PO shall be made out to: Golden State Fire Apparatus, Inc. – 7400 Reese Road – Sacramento, CA 95828.

ACCEPTANCE – ACCEPTANCE OF THIS PROPOSAL CREATES AN ENFORCEABLE BINDING AGREEMENT BETWEEN GSFA AND CUSTOMER. “ACCEPTANCE” MEANS THAT THE CUSTOMER DELIVERS TO GSFA: (A) A SIGNED COPY OF THIS PRODUCT PROPOSAL, OR (B) A SIGNED COPY OF A PURCHASE ORDER INCORPORATING THE AGREEMENT IN ITS ENTIRETY. ANY ADDITIONAL OR DIFFERENT TERMS, WHETHER CONTAINED IN CUSTOMER’S FORMS OR OTHERWISE PRESENTED BY CUSTOMER AT ANY TIME, ARE HEREBY REJECTED AND OF NO EFFECT UNLESS APPROVED IN WRITING SIGNED BY GSFA.

COUNTERPARTS - This Product Proposal may be executed in multiple counterparts, each of which shall be deemed an original (including copies sent to a party by electronic transmission) as against the party signing such counterpart, but which together shall constitute one and the same instrument. A signed copy of this Product Proposal delivered by facsimile, email or other means of electronic transmission will be deemed to have the same legal effect as delivery of an original signed copy of this Product P roposal.

If this Product Proposal is returned to GSFA with the signature of Customer’s authorized representative but without an attest ation or co-signers signature, then absent Customer’s written notice to the contrary, GSFA shall be entitled to rely on such single signature as sufficient evidence of the signatory’s authority to execute the Agreement and bind Customer thereby.

INTENDING TO CREATE A BINDING AGREEMENT, Customer and GSFA have each caused this Product Proposal dated 11/12/2025, GSFA Proposal Number 31112-25AP to be executed by their duly authorized representatives effective as of the Executed Date.

ACCEPTED AND AGREED TO BY CUSTOMER ACCEPTED AND AGREED TO BY GSFA

__________________________________________________ _________________________________________________ Signature of Authorized Customer Representative Signature of Authorized GSFA Representative

__________________________________________________ _________________________________________________ Print Name Print Name

__________________________________________________ _________________________________________________ Title Title

__________________________________________________ _________________________________________________

Date Date

OPTION B

PAYMENT AT TIME OF DELIVERY OR PICKUP

This will be the price of the Product(s) contingent
upon the Customer paying the Grand Total
Purchase Price to GSFA at time of delivery or pickup
pursuant to the Payment Terms

goldenstatefire.com

7400 Reese Road, Sacramento, CA 95828 | 916.330.1638

PRODUCT PROPOSAL FOR:

City of Salinas
65 W. Alisal Street, Suite 210
Salinas, CA 93901
Sales Consultant
Dewayne Young
[email protected]
Mobile: (209) 777-0650

Golden State Fire Apparatus, Inc. (“GSFA”) is pleased to provide this proposal for the fire apparatus(es) and equipment identified below (the " Product”) to CITY OF SALINAS (“Customer ”) for consideration. This proposal (this “ Product Proposal ”) includes the following exhibits attached hereto: the Standard Terms and Conditions attached as Exhibit A (the “Terms and Conditions ”); the Product Specifications attached as Exhibit B (the “Specifications ”); the Product Warranties attached as Exhibit C; and the Dealer Supplied Products and/or Services attached as Exhibit D (the “Dealer Supplied Products/Services List ”) (all of the foregoing, collectively, the “ Agreement”). Through its signature below or other Acceptance (as defined on page 2), Customer a cknowledges having received and read, and agrees to be bound by, the Agreement. The Agreement shall be effective as of the latest date appearing in the signature blocks below (the “ Executed Date”).

PAYMENT TERMS – Customer shall pay the total purchase price set forth directly above (the “ Grand Total Purchase Price”) to GSFA no later than the time of GSFA’s delivery of the applicable Product to Customer’s address listed above ( or Customer’s pick up of such Product at GSFA’s facilities, if approved by GSFA). GSFA shall have no obligation to deliver, or permit pick up of the Product if the Customer does not have full payment ready when the Product is complete and ready to deliver or pick up, as applicable. Customer shall pay any balance due as a result of Change Orders as described in the Terms and Conditions .

MANUFACTURER – Customer acknowledges that GSFA is not an agent of the Product manufacturer identified above (“Manufacturer”) and is not capable of binding Manufacturer. Within five (5) business days of the Executed Date, GSFA shall submit an order form to the Manufacturer for the Product. GSFA’s further performance under the Agreement is contingent upon Manufacturer’s acceptance of such order form at the price and on the terms GSFA believed to be available when submitting this Product Proposal to Customer. If Manufacturer rejects such order as submitted or fails to respond to GSFA within a reasonable amount of time, GSFA shall notify Customer in writing, and unless GSFA and Customer otherwise agree in writing , the Agreement shall then terminate and have no further force or effect.

SUBMITTED DATE EXPIRATION DATE GSFA PROPOSAL # MANUFACTURER BID # MANUFACTURER CONSORTIUM 11/12/2025 01/09/2026 31112-25BP 969 Pierce
Manufacturing Inc.

Sourcewell #113021-
OKC, ID #259,
Member #2424

ITEM PRODUCT DESCRIPTION EXTENDED PRICE
A Two (2) Pierce Manufacturing, Inc. Enforcer 1500 GPM Type 1 Fire Engines 2,232,864.00 B 9.25% State Sales Tax 206,539.92
C California Tire Fee 21.00
D 100% Performance Bond 3,256.00
E GRAND TOTAL PURCHASE PRICE 2,442,680.92

goldenstatefire.com

7400 Reese Road, Sacramento, CA 95828 | 916.330.1638
PRODUCT COMPLETION – The Product shall be ready for final inspection by Customer at the manufacturing facility within approximately 48 to 51 MONTHS after the Executed Date. The foregoing estimate is provided as a good faith approximation as of the date of submission of this Product Proposal and is subject to the Terms and Conditions.

PREDELIVERY SERVICE – If applicable, after transportation from the manufacturing facility and prior to final delivery or pick up, the Product shall receive those additional Products and/or services identified on the Dealer Supplied Products/Services List. It is estimated that such a service will add approximately 0.5 to 1.5 MONTH(S) to the above Product completion estimate. The foregoing estimate is provided as a good faith approximation as of the date of submission of this Product Proposal and is subject to the Terms and Conditions.

PROPOSAL EXPIRATION – This Product Proposal supersedes any previous proposal(s) presented to Customer by GSFA and its employees and may be accepted by Customer on or before the Expiration Date identified above. Unless accepted by the Expiratio n Date, GSFA reserves the right to withdraw this Product Proposal or to alter its terms (including by providing updated Product pricing) prior to an order being accepted.

PURCHASE ORDER – Any PO shall be made out to: Golden State Fire Apparatus, Inc. – 7400 Reese Road – Sacramento, CA 95828.

ACCEPTANCE – ACCEPTANCE OF THIS PROPOSAL CREATES AN ENFORCEABLE BINDING AGREEMENT BETWEEN GSFA AND CUSTOMER. “ACCEPTANCE” MEANS THAT THE CUSTOMER DELIVERS TO GSFA: (A) A SIGNED COPY OF THIS PRODUCT PROPOSAL, OR (B) A SIGNED COPY OF A PURCHASE ORDER INCORPORATING THE AGREEMENT IN ITS ENTIRETY. ANY ADDITIONAL OR DIFFERENT TERMS, WHETHER CONTAINED IN CUSTOMER’S FORMS OR OTHERWISE PRESENTED BY CUSTOMER AT ANY TIME, ARE HEREBY REJECTED AND OF NO EFFECT UNLESS APPROVED IN WRITING SIGNED BY GSFA.

COUNTERPARTS - This Product Proposal may be executed in multiple counterparts, each of which shall be deemed an original (including copies sent to a party by electronic transmission) as against the party signing such counterpart, but which together shall constitute one and the same instrument. A signed copy of this Product Proposal delivered by facsimile, email or other means of electronic transmission will be deemed to have the same legal effect as delivery of an original signed copy of this Product P roposal.

If this Product Proposal is returned to GSFA with the signature of Customer’s authorized representative but without an attest ation or co-signers signature, then absent Customer’s written notice to the contrary, GSFA shall be entitled to rely on such single signature as sufficient evidence of the signatory’s authority to execute the Agreement and bind Customer thereby.

INTENDING TO CREATE A BINDING AGREEMENT, Customer and GSFA have each caused this Product Proposal dated 11/12/2025, GSFA Proposal Number 31112-25BP to be executed by their duly authorized representatives effective as of the Executed Date.

ACCEPTED AND AGREED TO BY CUSTOMER ACCEPTED AND AGREED TO BY GSFA

__________________________________________________ _________________________________________________ Signature of Authorized Customer Representative Signature of Authorized GSFA Representative

__________________________________________________ _________________________________________________ Print Name Print Name

__________________________________________________ _________________________________________________ Title Title

__________________________________________________ _________________________________________________

Date Date

JROGHQVWDWHĆUHFRP

STANDARD TERMS

AND CONDITIONS
Exhibit “A”
2 1

STANDARD TERMS AND CONDITIONS

1. Definitions.

a. “Agreement” has the meaning given in the Product Proposal. b. “Customer” means the customer identified in the Product Proposal. c. “Dealer Preparation,” if applicable, means additional product(s) and/or services added or provided by GSFA after Manufacturer’s completion of the Product and transportation to GSFA’s premises prior to delivery to Customer, in accordance with the Dealer Supplied Products/Services List and/or a valid Change Order(s). d. “Dealer Supplied Products/Services List” means the Dealer Supplied Products and/or Services List attached to the Product Proposal as Exhibit D, which reflects all Dealer Pre paration under the Agreement absent a valid Change Order(s).
e. “Grand Total Purchase Price ” means the total purchase price for the Product identified in the Product Proposal (subject to any adjustments required or permitted by these Terms and Conditions, including by the execution of a valid Change Order(s)).
f. “GSFA” means Golden State Fire Apparatus, Inc., a California corporation. g. “Manufacturer” means the person or persons, company, firm, corporation, partnership, or other organization identified in the Product Proposal as responsible for manufacturing the Product . h. “Party” or “Parties” means GSFA and/or Customer, as applicable. i. “Prepayment Discount” means a discount to the purchase price for the Product granted to Customer in connection with Customer’s advance payment of the Grand Total Purchase Price (or portion thereof, as specified in the Product Proposal), if applicable.
j. “Product” means the fire apparatus(es) and any associated equipment listed in the Product Proposal and further described in the Specifications.
k. “Product Proposal” means the GSFA proposal executed by Customer to which these Terms and Conditions are attached.
l. “Product Warranties ” means the Manufacturer warranties for the Product attached to the Product Proposal as Exhibit C.
m. “Specifications” means the specifications for the Product attached to the Product Proposal as Exhibit B. n. “Terms and Conditions ” means these Standard Terms and Conditions , which are attached to the Product Proposal as Exhibit A.

2. Purchase and Payment.

a. Purchase. Customer agrees to purchase the Product a t the Grand Total Purchase Price (as such amount may be adjusted in accordance with these Terms and Conditions) , pursuant to the payment terms set forth in the Product Proposal. The Grand Total Purchase Price is payable in U.S. dollars.

b. Contingency Reserve Fund. The Grand Total Purchase Price may include an amount to be set aside for the purpose of funding any future costs or financial obligations incurred by Customer under the Product Proposal or any valid Change Order(s) (the “Contingency Reserve Fund”). If applicable, the amount of any required Contingency Reserve Fund will be set forth in either the Product Proposal or Exhibit D. The Contingency Reserve Fund may be withdrawn against by Customer or GSFA for the purpose of satisfying Customer’s payment obligations under the initial Product Proposal or any valid Change Order (s) (including, without limitation, a Change Order submitted by GSFA pursuant to Section 8.b). If a Contingency Reserve Fund is required under the Agreement, the amount of such fund is not intended as an estimate of the actual additional costs of contingencies, Change Orders, unforeseen items or other required work that may be incurred under the Agreement after submission of the Product Proposal to Customer, which amounts Customer acknowledges may exceed the Contingency Reserve Fund amount. The balance of any Contingency Reserve Fund will be credited against Customer’s payment obligations, or otherwise returned to Customer within thirty (30) calendar days of delivery of all Products under the Agreement (provided that Customer has paid all amounts owed under the Agreement as of such date).

2 c. Prepayment Discount . If GSFA has granted Customer a Prepayment Discount, Customer must provide each associated prepayment (each, a “ Prepayment”) within the time frame specified in the Product Proposal in order to receive such discount. Custom er’s failure to timely make any Prepayment may result in: (i) GSFA’s termination of the Agreement; and/or (ii) Customer’s loss of the Prepayment Discount for the portion of the Grand Total Purchase Price represented by such outstanding Prepayment and the application of a late f ee as set forth in Section 6, in each case in GSFA’s sole discretion.

d. State Sales Tax. Customer shall be responsible for the cost of state sales tax associated with, or attributable to, the Product. The taxes stated in the Product Proposal are subject to adjustment for the applicable state sales tax rate in effect at the time of delivery. Therefore, the sales tax set forth on the Product Proposal is only an estimate of such taxes and will be increased or decreased at the time of d elivery if a change in the applicable sales tax rate has occurred, in which case Customer shall pay GSFA (or be refunded by GSFA) the difference in the applicable sales tax.

3. Product Completion Date . Within thirty (30) calendar days of the date on which the last required signatory executes the Product Proposal (such date, the “Executed Date”), GSFA shall submit to Customer a tentative Product completion date based on the then -estimated time to complete the manufacturing of the Product(s) and for the Product(s) to be ready for inspection and final approval by Customer at the manufacturing facility (which may differ from the Product completion estimate contained in the Product Proposal) . Due to global supply chain constraints, any Product completion date contained herein, or in the Product Proposal, or otherwise provided to Customer, is a good faith estimate only as of the date provided to Customer, and merely an approximation based on current information available to GSFA and Manufacturer . Customer shall not be entitled to rely on any such estimate, and GSFA shall have no liability to Customer for a failure by GSFA or Manufacturer to meet any such estimate. All Product completion estimates are subject to modification and, if applicable, GSFA will provide updates to such estimates to Customer when available.

4. Stock / Demo Units. Notwithstanding any other provision contained in the Agreement (including Section 12 hereof concerning warranties), any Products constituting stock/demo unit(s) are sold to Customer on an as-is, first-come and first-served basis and GSFA makes no further representation or warranty to any customer with respect to such unit(s). Regardless of the terms of the Product Proposal, GSFA shall only be obligated to sell such stock/demo unit(s) to the first customer to enter into a purchase agreement with GSFA identifying such unit(s), and after the execution by GSFA of such agreement any subsequent purchase agreement (including the Agreement, as applicable) shall have no further force or effect with respect to such unit(s).

5. Multiple Unit Purchase. If the Grand Total Purchase Price includes pricing for multiple Products, the Product price stated in the Product Proposal shall only be valid if the quantity of Products being proposed are purchased at the same time, pursuant to the same Agreement. GSFA shall have no obligation to offer the same price for any Product if purchased by Customer pursuant to a later purchase agreement.

6. Late Fee; Storage Fee. A late fee equal to 0.033% of the outstanding portion of the Grand Total Purchase Price will be charged per calendar day for overdue payments beginning ten (1 0) calendar days after the payment is due and continuing for the first thirty (30) calendar days thereafter. After such thirty (30) calendar day period , the late fee shall increase to 0.044% per calendar day until payment of the outstanding portion of the Grand Total Purchase Price is received; provided that if Customer is a public agency, the foregoing late fees shall not exceed the statutory limit set forth in Section 926.10 of the California Government Code . If Customer is unable to satisfy the delivery requirements hereunder or is unwilling to take delivery of the Product, then GSFA shall be entitled to a storage charge running from the earlier of: (i) the date of delivery agreed to between GSFA and Customer (provided GSFA is willing and able to deliver the Product on such date) , or (ii) twenty-one ( 21) calendar days after GSFA notifies Customer that the Product is available for delivery. The storage charge is equal to: (i) $175.00 per calendar day per apparatus stored, or (ii) the actual charges incurred by GSFA with a third party for storage of the Product, whichever is greater. Such storage charge shall continue until the actual time of d elivery and Customer’s possession of the Product, and any such storage by GSFA or such third party shall be at the sole risk of Customer.

3 7. Delivery; Inspection and Acceptance.

a. Delivery. Subject to Section 5 hereof, the Product is scheduled to be delivered to the location and within the time period specified in the Product Proposal . Such delivery date is an estimate, and GSFA is , notwithstanding this Section 7.a, not bound to such date unless it otherwise agrees in a separate writing to complete delivery by a date certain. For the avoidance of doubt, GSFA is not responsible for delivery delays caused by or because of actions, omissions or conduct of Customer, the Manufacturer, or their respective employees, affiliates, suppliers, contractors, and carriers. Risk of loss for the Product shall pass to Customer at the point and time of delivery (which shall include an attempted d elivery by GSFA which cannot be completed due to any act or omission of Customer) .

However, title to the Product shall only pass to Customer upon d elivery if Customer has then fully paid GSFA all amounts due hereunder (including additional amounts due under any valid Change Order). Absent GSFA’s separate written agreement, which it may or may not provide in its sole and absolute discretion, d elivery of the Product will not occur before Customer has fully paid all amounts due under the Agreement and provided proof of insurance reasonably satisfactory to GSFA. If GSFA permits Customer to take possession of the Product prior to such payment, Customer may not mount equipment, conduct training, or place the Product into service until all amounts due under the Agreement have been paid. If Customer has ordered multiple Products, GSFA reserves the right to deliver such Products in installments and to separately invoice Customer for such Products.

b. Inspection and Acceptance . Upon delivery, Customer shall have ten (10) calendar days within which to inspect the Product for substantial conformance to the Specifications, and in the event of substantial non- conformance to the Specifications to furnish GSFA with written notice sufficient to permit GSFA to evaluate such non-conformance (“ Notice of Nonconformance to Specifications ”). Contingent upon part availability and Customer’s cooperation, any Product not in substantial conformance to material Specifications shall be remedied by GSFA (by repair or replacement, at GSFA’s election) within thirty (30) calendar days from GSFA’s receipt of the Notice of Nonconformance to Specifications. In the event GSFA does not receive a Notice of Nonconformance to Specifications within ten (10) calendar days of d elivery, the Product will be deemed to be in conformance with Specifications and accepted by Customer.

8. Changes to Agreement Terms.

a. Change Orders . The Customer may request that GSFA incorporate a change to the Product or the Specifications for the Product, or GSFA may submit changes to the Agreement required or permitted to be made by GSFA (pursuant to Section 8.b or otherwise), by delivering a written Change Order to the other party hereto , which shall include a description of the proposed change sufficient to permit the receiving party to evaluate such change (either, a “Change Order”). For any Change Order submitted by Customer, GSFA will provide Customer a written response (a “Response”) stating (i) whether GSFA will accommodate such Change Order (which GSFA may decide in its sole and absolute discretion) ; and (ii) the terms of the modification to the order, including any increase or decrease in the Grand Total Purchase Price resulting from such Change Order, a date on which any increase in the Grand Total Purchase Price must be paid, and an estimate of any effect on production scheduling or delivery resulting from such Change Order. Customer shall have seven (7) calendar days after receipt of the Response to notify GSFA as to whether Customer desires to make the changes GSFA has approved in the Response. In the event Customer countersigns GSFA’s Response, Customer shall pay the increase (or be refunded the decrease) in the Grand Total Purchase Price by the date specified in the Response. GSFA may also send Customer a Change Order to account for any changes to the Agreement required or permitted to be made by GSFA (including those changes required pursuant to Section 8.b hereof), and such Change Order shall be effective upon d elivery to Customer unless Customer elects to terminate the applicable Product order under the Agreement in accordance with Section 9.

b. Additional Changes.

i. Component Price Volatility ; Increases Imposed by Manufacturer. GSFA shall not be responsible for (i) any unforeseen price increase or surcharge enacted by suppliers of major components of the Product (including but not limited to commercial chassis, engine, transmission, and fire pump); or (ii) price increases imposed on GSFA by Manufacturer pursuant to Manufacturer’s terms and conditions for sale of the Product (a “Manufacturer 4 Price Increase”), after Customer becomes bound by the Agreement . Customer shall be responsible for all amounts arising from any price increas es for major components of the P roduct (including all ass ociated taxes an d fees thereon) or any Manufacturer Price Increase s occurring after the execution of the Agreement which increase the cost of the Product to GSFA , and such amounts will be documented on a Change Order adjusting the Grand Total Purchase Price accordingly . Customer shall pay any such p rice increase prior to Product delivery. A Manufacturer Price Increase may include, but shall not be limited to, an increase in Product price resulting from an increase in the Producer Price Index of Components for Manufacturing (see www.bls.gov Series ID: WPUID6112) in excess of a compounded annual growth rate of five percent (5%), as measured between the month Manufacturer accepts the applicable Product order and the month that is fourteen (14) months prior to the then- current estimated Product completion date (the foregoing, a “ PPI-Based Price Increase”) . If, upon Customer’s receipt of a Change Order reflecting a PPI-Based Price Increase, Customer elects to terminate the applicable Product o rder in accordance with Section 8.b.iii rather than pay such increase, then in lieu of the cancellation fees described in Section 9.a hereof GSFA shall be entitled to recover and Customer shall pay GSFA’s actual non- reimbursable costs incurred in connection with the Product order through the date of Customer’s termination of such Product order.

ii. New Legal Standards. In the event the Product design, materials or specifications require an alteration arising from new regulations issued by any governmental entity or trade association, including, but not limited to, the NFPA, DOT, and EPA , and such alteration increases the cost of the Product to GSFA, Customer shall be responsible for changes to the Grand Total Purchase Price arising from such alteration. GSFA shall promptly notify Customer when it becomes aware of any potential or required change in regulations occurring prior to delivery that would impact the Product purchased.

iii. Change Orders. Customer shall execute any Change Order submitted by GSFA documenting any of the changes required or permitted by Sections 8.b.i and 8.b.ii above (which shall, to the extent practicable, itemize any increases in the Grant Total Purchase Price and specify a commercially reasonable date by which Customer must pay such increase), unless Customer instead elects to terminate the applicable Product order under the Agreement within fifteen (15 ) calendar days of Customer’s receipt of such Change Order and in accordance with Section 9.

Absent such a termination, failure or refusal to execute a Change Order does not alter Customer’s obligations under this Section 8.b.

c. Changes in Commercial Specifications . Specifications for all components of the Product manufactured by companies other than the Manufacturer are subject to change without notice. Specifications for such components will be as available at the time of manufacture of the Product. GSFA shall not be liable for any deviations in such specifications arising from a substitution of components or changes in the design of any component by their original manufacturer.

9. Termination.

a. By Customer. Customer may terminate a Product order identified in the Product Proposal or a Change Order by providing written notice to GSFA in accordance with Section 16 hereof. If Customer elects to terminate a Product order, Customer shall pay GSFA a cancellation fee as follows: (a) after the Product order is accepted and entered by GSFA , 10% of the portion of the Grand Total Purchase Price applicable to such Product (including all associated taxes, fees and costs) (such amount, the “ Product Purchase Price ”); (b) after completion of the pre - construction phase of the order process , 20% of the Product Purchase Price ; and (c) after the requisition of any materials or commencement of any manufacturing or assembly of the Product by either GSFA or Manufacturer but before substantial completion of such Product, 50% of the Product Purchase Price. Customer shall not be permitted to terminate a Product order after substantial completion of manufacturing and assembly of such Product (excluding any Dealer Preparation or other pre -delivery services or untypical Product customization, if applicable).

Notwithstanding the foregoing, if the applicable tier of cancellation fee is not sufficient to cover all actual costs and fees incurred by GSFA with Manufacturer in connection with Customer’s termination of the Product order (“Manufacturer Termination Fees”), then in addition to such cancellation fee Customer shall pay the balance of all Manufacturer Termination Fees. If Customer received a Prepayment Discount, such discount shall not be considered for the purpose of calculating the above cancellation fee. The tier of cancellation fee applicable to any cancellation , 5 as well as the determination of whether a Product has reached substantial completion, shall be in the sole and absolute discretion of GSFA. Customer may request a fee waiver, and GSFA, in its sole discretion, may agree to waive and/or adjust such fee . GSFA will return the balance of the Grand Total Purchase Price or Product Purchas e Price, as applicable, within thirty (30) calendar days of the effective date of the cancellation of the Product order or termination of the Agreement.

Customer may terminate the Agreement for an Event of Default by GSFA after providing GSFA with written notice in accordance with Section 16 (which notice shall describe with reasonably particularity the Event of Default justifying such termination) if such Event of Default remains uncured (if capable of cure) thirty (30) days following GSFA’s receipt of such notice; provided, however, that the foregoing cure period shall continue if and for so long as GSFA has commenced and is continuing to undertake commercially reasonable efforts to cure such Event of Default as promptly as reasonably practicable.

b. By GSFA . GSFA may terminate the Agreement for an Event of Default by Customer after providing Customer with written notice in accordance with Section 16 (which notice shall describe with reasonably particularity the Event of Default justifying such termination) if such Event of Default remains uncured (if capable of cure) thirty (30) days following Customer’s receipt of such notice; provided, however, that the foregoing cure period shall continue if and for so long as Customer has commenced and is continuing to unde rtake commercially reasonable efforts to cure such Event of Default as promptly as reasonably practicable. Notwithstanding the foregoing, GSFA may terminate the Agreement effective immediately upon written notice to Customer for Customer’s failure to pay any amount owed under the Agreement when due .

Notwithstanding any other provision of this Agreement, if Customer terminates a Product order in accordance with Section 9.a above, GSFA may elect to instead terminate the Agreement upon notice to Customer in accordance with Section 16 hereof. If GSFA terminates the Agreement in accordance with this Section 9 .b, Customer shall pay the applicable tier of cancellation fee for all Products pursuant to Section 9.a above as if Customer had elected to terminate each applicable Product order.

c. Based on Discontinuation or Cancellation by Manufacturer . In the event that Manufacturer cancels a Product order (provided that such cancellation is not the result of an act by Customer in violation of the Agreement) or discontinues the manufacture of a Product prior to its completion and d elivery: (i) if such Product is the only Product contemplated under the Agreement, then the Agreement shall terminate; or (ii) if additional Products are contemplated under the Agreement, then only the Product order for the applicable cancelled or discontinued Product shall be terminated . Such Agreement termination or Product termination , as applicable, shall be effective upon GSFA’s written notice to Customer of such cancellation or discontinuance in accordance with Section 16 hereof.

GSFA’s only obligation to Customer in such event shall be the return of any Prepayment paid by Customer for the cancelled or discontinued Product. For the avoidance of doubt, the cancellation fees contemplated in Section 9.a hereof shall not apply in the event of a termination pursuant to this Section 9.c .

10. Customer’s Obligations . Customer shall provide its timely and best efforts to cooperate with GSFA and Manufacturer during the Product manufacturing and Dealer Preparation process. Reasonable and timely cooperation includes, without limitation, Customer’s providing timely information in response to any requests from Manufacturer or GSFA and the participation of Customer’s authorized representatives in traveling to Manufacturer’s facility for inspections and approval of the Product, including a final approval before the Product leaves Manufacturer’s facility.

11. Representations and Warranties . Customer hereby represents and warrants to GSFA as of the Executed Date that the execution of the Agreement and the purchase of the Product(s) and performance of the other obligations of Customer under the Agreement have been approved by Customer in accordance with applicable general laws and, as applicable, Customer’s charter, ordinances , purchasing policies, and other governing documents, and executed by the appropriate Customer employees, officials, and/or representatives , and fundi ng for Customer’s performance of its obligations under the Agreement has been duly budgeted and appropriated by Customer.

6 12. Standard Warranty . All applicable M anufacturer warranties are contained in the Product Warranties . Any additional warranties must be expressly approved in a writing signed by GSFA, and Customer acknowledges and agrees that Manufacturer will not be liable for any such additional warranties .

a. Disclaimer. OTHER THAN AS EXPRESSLY SET FORTH IN THE AGREEMENT, GSFA, ITS AFFILIATES, AND THEIR

RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, SHAREHOLDERS, AGENTS, OR REPRESENTATIVES, DO NOT MAKE

ANY EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT (WHETHER RELATING TO THE CONDITION

OR QUALITY OF THE PRODUCT, OR OTHERWISE) PROVIDED HEREUNDER OR OTHERWISE REGARDING THE

AGREEMENT (INCLUDING, WITHOUT LIMITATION, WITH RESPECT TO ANY APPLICABLE DEALER PREPARATION) , WHETHER ORAL OR WRITTEN, EXPRESS, IMPLIED OR STATUTORY. WITHOUT LIMITING THE FOREGOING, ANY

IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, THE IMPLIED WARRANTY AGAINST INFRINGEMENT, THE

IMPLIED WARRANTY OR CONDITION OF FITNESS FOR A PARTICULAR PURPOSE , AND ANY IMPLIED WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE ARE EXPRESSLY EXCLUDED AND DISCLAIMED BY GSFA.

STATEMENTS MADE BY SALES CONSULTANTS OR IN PROMOTIONAL MATERIALS DO NOT CONSTITUTE WARRANTIES.

b. Exclusions of Incidental and Consequential Damages . In no event shall GSFA be liable for special, consequential, incidental, indirect or punitive damages incurred by Customer in connection with any matter ar ising out of or relating to the Agreement, or the breach thereof, even if GSFA has been advised of the possibility of such damages, and regardless of whether such damages arise out of breach of warranty, the Agreement, indemnity, whether resulting from non -delivery or from GSFA’s own negligence, or otherwise, except and solely to the extent such damages arise from the gross negligence or willful misconduct of GSFA.

13. Default. The occurrence of one or more of the following events (each, an “Event of Default”) shall constitute a default under the Agreement: (a) Customer’s failure t o pay any amounts due or to perform any of its obligations under the Agreement; (b) GSFA’s failure to perform any of its obligations under the Agreement; (c) either Party becoming insolvent or becoming subject to bankruptcy or insolvency proceedings; (d) any representation made by either Party under the Agreement which is false in any material respect; (e) any action by Customer to dissolve, merge, consolidate or transfer a substantial portion of its property to another entity during the term of the Agreement; (f) any other material breach of the terms of the Agreement by a Party; or (g ) a default or breach by Customer under any other agreement with GSFA or its affiliates.

14. Indemnification of GSFA . Customer shall indemnify, defend, and hold harmless GSFA, its agents, servants, successors and assigns from and against all losses, damages, injuries, claims, demands and expenses, including attorneys’ fees and other legal expenses, of whatever nature (“Damages”), to the extent such Damages arise out of or in connection with : (i) Customer’s breach of the Agreement, or (ii) Customer’s use, storage, or operation of the Product following delivery, regardless of where, how, and by whom operated (excluding any negligent operation by GSFA). The indemnification and assumptions of liability and obligation herein provided shall continue in full force and effect notwith standing the termination of the Agreement, whether by expiration of time, by operation of law or otherwise. This provision is not intended to and shall not constitute the exclusive remedy of the Parties under the Agreement; the Parties may seek indemnity from one another under other legal principles, whether based in equity or law, so long as they do not nullify or cancel the effects of this paragraph.

15. Force Majeure. GSFA shall not be responsible nor deemed to be in default of any provision of the Agreement on account of delays in performance due to causes which are beyond GSFA’s or Manufacturer’s control and which make GSFA’s performance impracticable, including but not limited to wars, insurrections, strikes or labor unrest, riots, fires, storms, floods, other acts of nature, explosions, earthquakes, accidents, any act of federal, state or local government, failure or delays in transportation, inability to obtain necessary labor , supplies or manufacturing facilities, supply chain issues, allocation regulations or orders affecting materials, equipment, facilities or completed products, failure to obtain any required license or certificates, acts of God or the public enemy or terrorism, failure of transportation, disease, pandemics or epidemics, quarantine restrictions, failure of vendors (due to causes similar to those within the scope of this clause) to perform their agreements or labor troubles causing cessation, slowdown, or interruption of work.

7 16. Notice. Any notices, requests, consents, claims, demands, waivers and other communications required or permitted to be given hereunder must be given in writing at the address of each Party set forth below, or t o such other address as either P arty may substitute by written notice to the other in accordance with this Section 16 , by one of the following methods: hand delivery; registered, express, or certified mail, return receipt requested, postage prepaid; or nationally recognized private express courier. All such communicati ons will be deemed to have been given: (i) when delivered by hand (with written confirmation of receipt); (ii) on the third (3rd) calendar day after the date mailed, by registered, express or certified mail; or (iii) when delivered by the addressee if sent by a nationally recognized private express courier.

GSFA: CUSTOMER:

Golden State Fire Apparatus Inc. To the address listed in the Product Proposal 7400 Reese Road
Sacramento, CA 95828

17. Contradictions. In the event of a conflict between the Agreement and any Change Order, or between Change Orders, the terms of the latest executed Change Order shall control.

18. Manufacturer’s Statement of Origin . It is agreed that the manufacturer’s statement of origin (“ MSO”) for the Product covered by the Agreement, if applicable, shall be retained and remain in the possession of GSFA per California Department of Vehicles (DMV) directive s. Notwithstanding the for egoing, GSFA shall provide Customer with the original MSO if the Customer is self- registering, and Customer shall comply with all good-faith Process of Duty and other DMV requirements applicable to the Product and retain its own MSO.

19. Assignment. The relationship of the Parties established under the Agreement is that of independent contractors and neither Party is a partner, employee, agent, or joint venturer of or with the other. Neither Party may assign its rights and obligations under the Agreement unless it has obtained the prior written approval of the other P arty.

20. Governing Law; Jurisdiction; Disputes. Without regard to any conflict of laws provisions, the Agreement is to be governed by and under the laws of the state of California. Prior to taking any legal action that may and/or can arise out of the Agreement, the Parties shall first attempt mediation with an agreed upon mediator. If the Parties cannot agree upon a mediator within thirty (30) calendar days of the submission of written notice of a dispute in accordance with Section 16 hereof, if any disputed matter remain unresolved within thirty (30) calendar days of the commencement of discussions, or if any party refuses to meet, then either party may submit any remaining disputes concerning and/or claim regarding the Agreement and/or the terms and conditions herein to the Superior Court, County of Sacramento (and the parties expressly consent to exclusive personal jurisdiction and venue before such court).

21. Entire Agreement; Amendments. The Agreement, including the Product Proposal, its exhibits and all valid Change Orders, is the exclusive agreement between the Parties regarding the subject matter contained herein and therein.

No change in, modi fication of, or revision of the Agreement shall be valid unless in writing and signed by duly authorized representatives of both Parties with authority to sign such amendments to the Agreement.

END OF STANDARD TERMS AND CONDITIONS
JROGHQVWDWHĆUHFRP

PRODUCT

SPECIFICATIONS
Exhibit “B”
3 Proposal Details Report
OptionCode Type Option ProposalText
0766611 Boiler Plates, Pumper

Golden State Fire ADMIN (SEND SP'S TO TURN PINK), Inc. is pleased to submit a proposal to Salinas Fire Department for a Pierce® triple combination pumper per your request for quotation. The following paragraphs will describe in detail the apparatus, construction methods, and equipment proposed. This proposal will indicate size, type, model and make of components parts and equipment, providing proof of compliance with each and every item (except where noted) in the departments advertised specifications.

PIERCE MANUFACTURING was founded in 1913. Since then, we have been building bodies with one philosophy, "BUILD THE FINEST". Our skilled craftsmen take pride in their work, which is reflected, in the final product. We have been building fire apparatus since the early "forties" giving Pierce Manufacturing over 75 years of experience in the fire apparatus market. Pierce Manufacturing has built and put into service more than 62,500 apparatus, including more than 33,900 on Pierce custom chassis designed and built specifically for fire and emergency applications. Our Appleton, Wisconsin facility has over 870,000 total square feet of floor space situated on approximately 105 acres of land. Our Bradenton, Florida facility has 300,000 square feet of floor space situated on approximately 38 acres of land.

Our beliefs in high ethical standards are carried through in all of our commitments and to everyone with whom we do business. Honesty, Integrity, Accountability and Citizenship are global tenets by which we all live and work. Consequently, we neither engage in, nor have we ever been convicted of price fixing, bid rigging, or collusion in any domestic or international fire apparatus market.

Pierce has only one brand of fire apparatus "Pierce", ensuring you are receiving top of the line product that meets your specification.

In accordance with the current edition of applicable NFPA standards, this proposal will specify whether the fire department, manufacturer, or apparatus dealership will provide required loose equipment.

Images and illustrative material in this proposal are as accurate as known at the time of publication but are subject to change without notice. Images and illustrative material are for reference only and may include optional equipment and accessories and may not include all standard equipment.

GENERAL DESIGN AND CONSTRUCTION
To control quality, ensure compatibility, and provide a single source for service and warranty, the custom cab, chassis, pump module and body will be entirely designed, assembled/welded and painted in Pierce owned manufacturing facilities. This includes, but not limited to the cab weldment, the pumphouse module assembly, the chassis assembly, the body and the electrical system.

QUALITY AND WORKMANSHIP
Pierce has set the pace for quality and workmanship in the fire apparatus field. Our tradition of building the highest quality units with craftsmen second to none has been the rule right from the beginning and we demonstrate that ongoing commitment by: Ensuring all steel welding follows American Welding Society D1.1-2004 recommendations for structural steel welding. All aluminum welding follows American Welding society and ANSI D1.2-2003 requirements for structural welding of aluminum. All sheet metal welding follows American welding Society B2.1-2000 requirements for structural welding of sheet metal. Our flux core arc welding uses alloy rods, type 7000 and is performed to American Welding Society standards A5.20-E70T1. Furthermore, all employees classified as welders are tested and certified to meet the American welding Society codes upon hire and every three (3) years thereafter. Pierce also employs and American Welding Society certified welding inspector in plant during working hours to monitor weld quality.

Pierce Manufacturing operates a Quality Management System under the requirements of ISO 9001. These standards sponsored by the International Organization for Standardization (ISO) specify the quality systems that are established by the manufacturer for design, manufacture, installation and service. A copy of the certificate of compliance is included with this proposal.

In addition to the Quality Management system, we also employ a Quality Achievement Supplier program to ensure the vendors and suppliers that we utilize meet the high standards we demand.

That is just part of our overall "Quality at the Source" program at Pierce.

To demonstrate the quality of our products and services, a list of at least five (5) fire departments/municipalities that have purchased vehicles for a second time is provided.

DELIVERY
The apparatus will be delivered under its own power to ensure proper break-in of all components while the apparatus is still under warranty. A qualified delivery representative shall deliver the apparatus and remain for a sufficient length of time to instruct personnel in proper operation, care and maintenance of the equipment delivered.

MANUAL AND SERVICE INFORMATION
At time of delivery, complete operation and maintenance manuals covering the apparatus will be provided. A permanent plate will be mounted in the driver's compartment specifying the quantity and type of fluids required including engine oil, engine coolant, transmission, pump transmission lubrication, pump primer and drive axle.

SAFETY VIDEO
At the time of delivery Pierce will also provide one (1) 39-minute, professionally produced apparatus safety video, in DVD format. A link to the video is also available on the Pierce Training website. This video will address key safety considerations for personnel to follow when they are driving, operating, and maintaining the apparatus, including the following: vehicle pre-trip inspection, chassis operation, pump operation, aerial operation, and safety during maintenance.

PERFORMANCE TESTS
A road test will be conducted with the apparatus fully loaded and a continuous run of no less than 11/12/2025
Customer: Salinas Fire Department Bid Number: 969
Representative Young, Dewayne Job Number:

Requirements Manager: Organization: Golden State Fire Apparatus, Inc Description: Salinas Fire Department - Enforc
Chassis: Enforcer Chassis
Body: Pumper, Medium, Galvanneal, 2nd Gen
1969Bid #:
ten (10) miles. During that time the apparatus will show no loss of power, nor will it overheat. The transmission drive shaft or shafts and the axles will run quietly and be free of abnormal vibration or noise. The apparatus when fully loaded will not have less than 25 percent nor more than 50 percent on the front axle, and not less than 50 percent nor more than 75 percent on the rear axle.

The apparatus will meet the current edition of applicable NFPA standards acceleration and braking requirements.

SERVICE AND WARRANTY SUPPORT
Pierce dealership support will be provided by Golden State Emergency Vehicle Services by operating in conjunction with a Pierce authorized service center. The service center will have factory-trained mechanics on staff versed in Pierce fire apparatus. The service facility will be located within one hundred fifty (150) miles of the fire department.

In addition to the dealership, Pierce has service facilities located in both, Weyauwega, Wisconsin and Bradenton, Florida. Pierce also maintains a dedicated parts facility of over 100,000 square feet in Appleton, Wisconsin. The parts facility stocks in excess of $5,000,000 in parts dedicated to service and replacement parts. The parts facility employs a staff dedicated solely for the distribution and shipment of service and replacement parts.

Service parts for the apparatus being proposed can be found via Pierceparts.com which, is an interactive online tool that delivers information regarding your specific apparatus as well as the opportunity to register for training classes.

As a Pierce customer you have the ability to view the complete bill of materials for your specific apparatus, including assembly drawings, piece part drawings, and beneficial parts notations. You will also have the ability to search the complete Pierce item master through a parts search function which offers all Pierce SKU's and descriptions offered on all Pierce apparatus. Published component catalogs, which include proprietary systems along with an extensive operator's manual library is available for easy reference.

Pierce Manufacturing maintains a dedicated service and warranty staff of over 35 personnel, dedicated to customer support, which also maintains a 24 hour 7 day a week toll free hot line, four (4) on staff EVTs, and offers hands-on repair and maintenance training classes multiple times a year.

LIABILITY
The successful bidder will defend any and all suits and assume all liability for the use of any patented process including any device or article forming a part of the apparatus or any appliance furnished under the contract.

INSURANCE PROVIDED BY BIDDER
Commercial General Liability Insurance
The successful bidder will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of commercial general liability insurance:

Each Occurrence:
$1,000,000
Products/Completed Operations Aggregate:
$1,000,000
Personal and Advertising Injury:
$1,000,000
General Aggregate:
$2,000,000
Coverage will be written on a Commercial General Liability form. The policy will be written on an occurrence form and will include Contractual Liability coverage for bodily injury and property damage subject to the terms and conditions of the policy. The policy will include Owner as an additional insured when required by written contract.

Commercial Automobile Liability Insurance
The successful bidder will, during the performance of the contract, keep in force at least the following minimum limits of commercial automobile liability insurance and coverage will be written on a Commercial Automobile liability form:

Each Accident Combined Single Limit:
$1,000,000
Umbrella/Excess Liability Insurance
The successful bidder will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of umbrella liability insurance:

Aggregate:
$3,000,000
Each Occurrence:
$3,000,000
The umbrella policy will be written on an occurrence basis and at a minimum provide excess to the bidder's General Liability and Automobile Liability policies.

The required limits can be provided by one (1) or more policies provided all other insurance requirements are met.

Coverage will be provided by a carrier(s) rated A- or better by A.M. Best.

All policies will provide a 30-day notice of cancellation to the named insured. The Certificate of Insurance will provide the following cancellation clause: Should any of the above described polices be cancelled before the expiration date thereof, notice will be delivered in accordance with the policy provisions.

Bidder agrees to furnish owner with a current Certificate of Insurance with the coverages listed above along with the bid. The certificate will show the purchaser as certificate holder.

INSURANCE PROVIDED BY MANUFACTURER
Product Liability Insurance
The manufacturer will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of Product Liability insurance:

Each Occurrence:
$1,000,000
Products/Completed Operations Aggregate:
$1,000,000
Coverage will be written on a Commercial General Liability form. The policy will be written on an occurrence form. The manufacturer's policy will include the owner as additional insured when required by written contract between the Owner and a Pierce authorized dealer. 2969Bid #:

Umbrella/Excess Liability Insurance
The manufacturer will, during the performance of the contract and for three (3) years following acceptance of the product, keep in force at least the following minimum limits of umbrella liability insurance:

Each Occurrence:
$25,000,000
Aggregate:
$25,000,000
The umbrella policy will be written on an occurrence basis and provide excess to the manufacturer's General Liability/Products policies.

The required limits can be provided by one (1) or more policies provided all other insurance requirements are met.

Coverage will be provided by a carrier(s) rated A- or better by A.M. Best.

All policies will provide a 30-day notice of cancellation to the named insured. The Certificate of Insurance will provide the following cancellation clause: Should any of the above described polices be cancelled before the expiration date thereof, notice will be delivered in accordance with the policy provisions.

Manufacturer agrees to furnish owner with a current Certificate of Insurance with the coverages listed above along with the bid. The certificate will show the purchaser as the certificate holder. 0661794 Single Source Compliance

SINGLE SOURCE MANUFACTURER
Pierce Manufacturing, Inc. provides an integrated approach to the design and manufacture of our products that delivers superior apparatus and a dedicated support team. From our facilities, the chassis, cab weldment, cab, pumphouse (including the sheet metal enclosure, valve controls, piping and operators panel) and body will be entirely designed, tested, and hand assembled to the customer's exact specifications. The electrical system either hardwired or multiplexed, will be both designed and integrated by Pierce Manufacturing. The warranties relative to these major components (excluding component warranties such as engine, transmission, axles, pump, etc.) will be provided by Pierce as a single source manufacturer. Pierce's single source solution adds value by providing a fully engineered product that offers durability, reliability, maintainability, performance, and a high level of quality.
0584456 Manufacture Location, Appleton,
Wisconsin
Your apparatus will be manufactured in Appleton, Wisconsin. 0584452 RFP Location: Appleton, Wisconsin

0588609 Vehicle Destination, US
0670275 Unit to be Similar in some Aspects,
Excluding Pump Panel

SPECIAL INSTRUCTIONS
The apparatus being proposed will be designed and built to match the 35932.  However, some variation may be necessary due to changes in our manufacturing processes or our product offering.  Revisions in NFPA guidelines and/or other regulations may also affect our ability to match the previous unit.
0816491 Comply NFPA 1900 Changes
Effective Jan 1, 2024, With
Exceptions
NFPA 2024 STANDARDS
This unit will comply with the NFPA standards effective January 1, 2024, except for fire department directed exceptions. These exceptions will be set forth in the Statement of Exceptions.

Certification of slip resistance of all stepping, standing and walking surfaces will be supplied with delivery of the apparatus.

All horizontal surfaces designated as a standing or walking surface that are greater than 48.00" above the ground must be defined by a 1.00" wide line along its outside perimeter. Perimeter markings and designated access paths to destination points will be identified on the customer approval print and are shown as approximate. Actual location(s) will be determined based on materials used and actual conditions at final build. Access paths may pass through hose storage areas and opening or removal of covers or restraints may be required. Access paths may require the operation of devices and equipment such as the aerial device or ladder rack.

A plate that is highly visible to the driver while seated will be provided. This plate will show the overall height, length, and gross vehicle weight rating.

The manufacturer will have programs in place for training, proficiency testing and performance for any staff involved with certifications.

An official of the company will designate, in writing, who is qualified to witness and certify test results.
0533347 Pumper/Pumper with Aerial Device
Fire Apparatus
0588611 Vehicle Certification, Pumper

3969Bid #:
0661778 Agency, Apparatus Certification,
Pumper/Tanker, U.L.

NFPA COMPLIANCY
Apparatus proposed by the bidder will meet the applicable requirements of the National Fire Protection Association (NFPA) as stated in current edition at time of contract execution. Fire department's specifications that differ from NFPA specifications will be indicated in the proposal as "non-NFPA".

PUMP TEST
Underwriters Laboratory (UL) will test, approved, and certify the pump. The test results and the pump manufacturer's certification of hydrostatic test; the engine manufacturer's certified brake horsepower curve; and the pump manufacturer's record of pump construction details will be forwarded to the Fire Department.

GENERATOR TEST
If the unit has a generator, Underwriters Laboratory (UL) will test, approved, and certify the generator. The test results will be provided to the Fire Department at the time of delivery.

BREATHING AIR TEST
If the unit has breathing air, Pierce Manufacturing will draw an air sample from the air system and have the sample certified that the air quality meets the requirements of NFPA 1989, Standard on Breathing Air Quality for Fire and Emergency Services Respiratory Protection. 0816495 Certification, Vehicle Inspection
Program, NFPA 1900

VEHICLE INSPECTION PROGRAM CERTIFICATION
To assure the vehicle is built to current NFPA 1900 standards, the apparatus, in its entirety, will be third-party, independent, audit-certified through Underwriters Laboratory (UL) that it is built and complies to all applicable standards in the current edition. The certification includes: all design, production, operational, and performance testing of not only the apparatus, but those components that are installed on the apparatus.

A placard will be affixed in the driver's side area stating the third party agency, the date, the standard and the certificate number of the whole vehicle audit. 0092138 Highly Customized Product (HCP) PRODUCT CHANGES AND IMPROVEMENTS Our components and processes, as described in this proposal document, are as accurate as known at the time of bid submission, but are subject to change for the purpose of product or process improvements, or changes in industry standards providing the change does not affect the meaning or definition of the bid specifications.
0766110 Consortium, Sourcewell

0537375 Unit of Measure, US Gallons

0030006 Bid Bond Not Requested

BID BOND NOT REQUESTED
A bid bond will not be included. If requested, the following will apply:

All bidders will provide a bid bond as security for the bid in the form of a 5 percent bid bond to accompany their bid. This bid bond will be issued by a Surety Company who is listed on the U.S.

Treasury Departments list of acceptable sureties as published in Department Circular 570. The bid bond will be issued by an authorized representative of the Surety Company and will be accompanied by a certified power of attorney dated on or before the date of bid. The bid bond will include language, which assures that the bidder/principal will give a bond or bonds as may be specified in the bidding or contract documents, with good and sufficient surety for the faithful performance of the contract, including the Basic One (1) Year Limited Warranty, and for the prompt payment of labor and material furnished in the prosecution of the contract.

Notwithstanding any document or assertion to the contrary, any surety bond related to the sale of a vehicle will apply only to the Basic One (1) Year Limited Warranty for such vehicle. Any surety bond related to the sale of a vehicle will not apply to any other warranties that are included within this bid (OEM or otherwise) or to the warranties (if any) of any third party of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. In the event of any contradiction or inconsistency between this provision and any other document or assertion, this provision will prevail.
4969Bid #:
0816574 Performance Bond, 100% with
Warranty Bond, 1 Yr, and Payment
Bond, PPI Terms
PERFORMANCE BOND, 1 YEAR
The successful bidder will furnish a Performance and Payment bond (Bond) equal to 100 percent of the total contract amount within 30 days of the notice of award. Such Bond will be in a form acceptable to the Owner and issued by a surety company included within the Department of Treasury's Listing of Approved Sureties (Department Circular 570) with a minimum A.M. Best Financial Strength Rating of A and Size Category of XV. In the event of a bond issued by a surety of a lesser Size Category, a minimum Financial Strength rating of A+ is required.

Bidder and Bidder's surety agree that the Bond issued hereunder, whether expressly stated or not, also includes the surety's guarantee of the vehicle manufacturer's Basic One (1) Year Limited Warranty period included within this proposal. Owner agrees that the penal amount of this bond will be simultaneously amended to 100 percent of the total contract amount upon satisfactory acceptance and delivery of the vehicle(s) included herein. Notwithstanding anything contained within this contract to the contrary, the surety's liability for any warranties of any type will not exceed one (1) year from the date of such satisfactory acceptance and delivery, or the actual Basic One (1) Year Limited Warranty period, whichever is shorter.

Due to global supply chain constraints, any delivery date contained herein is a good faith estimate as of the date of this order/contract, and merely an approximation based on current information. Delivery updates will be made available, and a final firm delivery date will be provided as soon as possible.

If the Producer Price Index of Components for Manufacturing [www.bls.gov Series ID:

WPUID6112] ("PPI") has increased at a compounded annual growth rate of 5.0% or more between the month Pierce accepts the order ("Order Month") and a month 14 months prior to the then predicted Ready For Pickup date ("Evaluation Month"), then pricing may be updated in an amount equal to the increase in PPI over 5.0% for each year or fractional year between the Order Month and the Evaluation Month.

The seller will document any such updated price for the customer's approval before proceeding and provide an option to cancel the order.
0000007 Approval Drawing APPROVAL DRAWING
A drawing of the proposed apparatus will be prepared and provided to the purchaser for approval before construction begins. The Pierce sales representative will also be provided with a copy of the same drawing. The finalized and approved drawing will become part of the contract documents. This drawing will indicate the chassis make and model, location of the lights, siren, horns, compartments, major components, etc.

A "revised" approval drawing of the apparatus will be prepared and submitted by Pierce to the purchaser showing any changes made to the approval drawing. 0002928 Electrical Diagrams ELECTRICAL WIRING DIAGRAMS
Two (2) electrical wiring diagrams, prepared for the model of chassis and body, will be provided. 0649754 Enforcer Chassis

ENFORCER CHASSIS
The Pierce Enforcer™ is the custom chassis developed exclusively for the fire service. Chassis provided will be a new, tilt-type custom fire apparatus. The chassis will be manufactured in the apparatus body builder's facility eliminating any split responsibility. The chassis will be designed and manufactured for heavy-duty service, with adequate strength, capacity for the intended load to be sustained, and the type of service required. The chassis will be the manufacturer's first line tilt cab.
0000110 Wheelbase WHEELBASE
The wheelbase of the vehicle will be 191.50.
0000070 GVW Rating GVW RATING
The gross vehicle weight rating will be 43,500#.
0649713 Frame Rails, 10.25" x 3.50" x .375",
Saber FR/Enf
FRAME
The chassis frame will be built with two (2) steel channels bolted to five (5) cross members or more, depending on other options of the apparatus. The side rails will be heat-treated steel measuring 10.25" x 3.50" x 0.375".

Each rail will have a section modulus of 16.00 cubic inches, yield strength of 120,000 psi, and a resisting bending moment (rbm) of 1,921,069 inch-pounds. 0648354 Frame Liner, Internal "C", 9.38" x

3.13" x .25", Saber FR/Enf, 26" Qval

FRAME REINFORCEMENT
A full-length mainframe "C" liner will be provided.

The liner will be an internal "C" design, heat-treated steel measuring 9.38" x 3.13" x 0.25". Each reinforcement member will have a section modulus of 3.90 cubic inches, yield strength of 120,000 psi and resisting bending moment (rbm) of 938,762 in-lb. 5969Bid #:
0630705 Axle, Front, Oshkosh TAK-4, Non
Drive, 19,500 lb, Enforcer

FRONT NON DRIVE AXLE
The Oshkosh TAK-4® front axle will be of the independent suspension design with a ground rating of 19,500 lb.

Upper and lower control arms will be used on each side of the axle. Upper control arm castings will be made of 100,000-psi yield strength 8630 steel and the lower control arm casting will be made of 55,000-psi yield ductile iron.

The center cross members and side plates will be constructed out of 80,000-psi yield strength steel.

Each control arm will be mounted to the center section using elastomer bushings. These rubber bushings will rotate on low friction plain bearings and be lubricated for life. Each bushing will also have a flange end to absorb longitudinal impact loads, reducing noise and vibrations.

There will be nine (9) grease fittings supplied, one (1) on each control arm pivot and one (1) on the steering gear extension.

The upper control arm will be shorter than the lower arm so that wheel end geometry provides positive camber when deflected below rated load and negative camber above rated load.

Camber at load will be zero degrees for optimum tire life.

The ball joint bearing will be of low friction design and be maintenance free.

Toe links that are adjustable for alignment of the wheel to the center of the chassis will be provided.

The wheel ends must have little to no bump steer when the chassis encounters a hole or obstacle.

The steering linkage will provide proper steering angles for the inside and outside wheel, based on the vehicle wheelbase.

The axle will have a turning angle of up to 45 degrees. 0030264 Suspension, Front TAK-4, 19,500 lb,
Qtm/AXT/Imp/Vel/Enf/SFR

FRONT SUSPENSION
Front Oshkosh TAK-4™ independent suspension will be provided with a minimum ground rating of 19,500 lb.

The independent suspension system will be designed to provide maximum ride comfort. The design will allow the vehicle to travel at highway speeds over improved road surfaces and at moderate speeds over rough terrain with minimal transfer of road shock and vibration to the vehicle's crew compartment.

Each wheel will have torsion bar type spring. In addition, each front wheel end will also have energy absorbing jounce bumpers to prevent bottoming of the suspension.

The suspension design will be such that there is at least 10.00" of total wheel travel and a minimum of 3.75" before suspension bottoms.

The torsion bar anchor lock system allows for simple lean adjustments, without the use of shims.

One can adjust for a lean within 15 minutes per side. Anchor adjustment design is such that it allows for ride height adjustment on each side.

The independent suspension was put through a durability test that simulated 140,000 miles of inner city driving.
0087572 Shock Absorbers, KONI, TAK-4,
Qtm/AXT/Imp/Vel/Enf

FRONT SHOCK ABSORBERS
KONI heavy-duty telescoping shock absorbers will be provided on the front suspension. 0000322 Oil Seals, Front Axle FRONT OIL SEALS
Oil seals with viewing window will be provided on the front axle. 0582936 Tires, Front, Goodyear, G289 WHA,
315/80R22.50, 20 ply

FRONT TIRES
Front tires will be Goodyear® 315/80R22.50 radials, 20 ply G289 WHA tread, rated for 20,400 lb maximum axle load and 68 mph maximum speed.
0019575 Wheels, Front, Alcoa, 22.50" x 9.00",
Aluminum, Hub Pilot
The tires will be mounted on Alcoa 22.50" x 9.00" polished aluminum disc wheels with a ten (10) stud, 11.25" bolt circle.
0530458 Axle, Rear, Meritor RS24-160, 24,000
lb, Saber/Enforcer

REAR AXLE
The rear axle will be a Meritor™, Model RS-24-160, with a capacity of 24,000 lb. 0544250 Top Speed of Vehicle, 65 MPH /104
KPH

TOP SPEED OF VEHICLE
A rear axle ratio will be furnished to allow the vehicle to reach a top speed of 65 MPH / 104 KPH. 0565379 Suspen, Rear, Single Slipper Spring,
24,000 lb, Saber/Enforcer

REAR SUSPENSION
The rear suspension will be Standens, semi-elliptical, 3.00" wide x 52.50" long, with a ground rating of 24,000 lb. The spring hangers will be castings.

The two (2) top leaves will wrap the forward spring hanger pin, and the rear of the spring will be a slipper style end that will ride in a rear slipper hanger.

A steel encased rubber bushing will be used in the spring eye. The steel encased rubber bushing will be maintenance free and require no lubrication.
0000485 Oil Seals, Rear Axle

REAR OIL SEALS
Oil seals will be provided on the rear axle(s).
6969Bid #:
0782552 Tires, Rear, Goodyear, Endurance
RSA, 12R22.50, LRH, Single

REAR TIRES
Rear tires will be four (4) Goodyear 12R22.50 radials, load range H, Endurance RSA highway tread, rated for 27,120 lb maximum axle load and 75 mph maximum speed. 0654792 Wheels, Rear, Alcoa-Accuride, 22.50"
x 8.25", Aluminum-Steel, Hub Pilot,
Single
The outside tires will be mounted on Alcoa® 22.50" x 8.25" polished aluminum disc wheels with a ten (10) stud, 11.25" bolt circle.

The inside tires will be mounted on Accuride® 22.50" x 8.25" steel disc wheels with a ten (10) stud, 11.25" bolt circle.

An isolator will be provided between the steel and aluminum rims. 0568081 Tire Balancing, Counteract Beads

TIRE BALANCE
All tires will be balanced with Counteract balancing beads. The beads will be inserted into the tire and eliminate the need for wheel weights.
0819008 No Tire Pressure Indicator, Fire
Department Omits, Non-NFPA 2024
Compliant

TIRE PRESSURE INDICATOR
NFPA 1900, 2024 edition, section 7.14.6 requires each tire be equipped with a visual indicator or monitoring system that indicates tire pressure.

Per Fire Department specification, a tire pressure indicator is not on the apparatus as manufactured. This apparatus will be non-compliant to NFPA 1900 standards effective at time of contract execution.
0003245 Axle Hub Covers w/center hole, S/S,
Front Axle

FRONT HUB COVERS
Stainless steel hub covers will be provided on the front axle. An oil level viewing window will be provided.
0012045 Mud Flap, Rear, Pierce Logo

MUD FLAPS
Mud flaps with a Pierce logo will be installed behind the rear wheels. 0544802 Chocks, Wheel, SAC-44-E, Folding,
(Up to 44" Diameter Tires)

WHEEL CHOCKS
There will be two (2) pairs of folding Ziamatic, Model SAC-44-E, aluminum alloy, Quick-Choc wheel blocks, with easy-grip handle provided.
0544806 Mounting Brackets, Chocks, SAC-44-
E, Folding, Horizontal
Wheel Chock Brackets
There will be two (2) pairs of Zico, Model SQCH-44-H, horizontal mounting wheel chock brackets provided for the Ziamatic, Model SAC-44-E, folding wheel chocks. The brackets will be made of aluminum and consist of a quick release spring loaded rod to hold the wheel chocks in place. The brackets will be mounted forward of the right side rear tire, rearward of the right side rear tire and one (1) forward and one (1) rearward of the left side rear tire. 0820509 ESC/ABS/ATC Wabco Brake
System, Single Rear Axle, NFPA
1900/ULC

ELECTRONIC STABILITY CONTROL
A vehicle control system will be provided as an integral part of the ABS brake system from Meritor Wabco.

The system will monitor and update the lateral acceleration of the vehicle and compare it to a critical threshold where a side roll event may occur. If the critical threshold is met, the vehicle control system will automatically reduce engine RPM, engage the engine retarder (if equipped), and selectively apply brakes to the individual wheel ends of the front and rear axles to reduce the possibility of a side roll event.

The system will monitor directional stability through a lateral accelerometer, steer angle sensor and yaw rate sensor. If spinout or drift out is detected, the vehicle control system will selectively apply brakes to the individual wheel ends of the front and rear axles to bring the vehicle back to its intended direction.

ANTI-LOCK BRAKE SYSTEM
The vehicle will be equipped with a Wabco 4S4M, anti-lock braking system. The ABS will provide a four (4) channel anti-lock braking control on both the front and rear wheels. A digitally controlled system that utilizes microprocessor technology will control the anti-lock braking system. Each wheel will be monitored by the system. When any wheel begins to lockup, a signal will be sent to the control unit. This control unit will then reduce the braking of that wheel for a fraction of a second and then reapply the brake. This anti-lock brake system will eliminate the lockup of any wheel thus helping to prevent the apparatus from skidding out of control.

AUTOMATIC TRACTION CONTROL
An anti-slip feature will be included with the ABS. The Automatic Traction Control will be used for traction in poor road and weather conditions. The Automatic Traction Control will act as an electronic differential lock that will not allow a driving wheel to spin, thereby supplying traction at all times. The ABS electronic control unit (ECU) will work with the engine ECU, sharing information concerning wheel slip. Engine ECU will use information to control engine speed, allowing only as much throttle application as required for the available traction, regardless of how much the driver is asking for. An "off road traction" switch will be provided on the instrument panel. Activation of the switch will allow additional tire slip to let the truck climb out and get on top of deep snow or mud.
7969Bid #:
0030185 Brakes, Knorr/Bendix 17", Disc,
Front, TAK-4
BRAKES
The service brake system will be full air type.

The front brakes will be Knorr/Bendix disc type with a 17.00" ventilated rotor for improved stopping distance.

The brake system will be certified, third party inspected, for improved stopping distance. 0509206 Brakes, Meritor, EX225, Disc Plus,
Rear, Single Axle
The rear brakes will be Meritor™, Disc Plus, Model EX225, disc operated with automatic slack adjusters and a 17.00" ventilated rotor for improved stopping distance. 0020784 Air Compressor, Brake,
Cummins/Wabco 18.7 CFM

BRAKE SYSTEM AIR COMPRESSOR
The air compressor will be a Cummins/WABCO with 18.7 cubic feet per minute output. 0644232 Brake Reservoirs, 4,272 Cubic Inch
Minimum Capacity, Saber
FR/Enforcer

BRAKE SYSTEM
The brake system will include:

Brake treadle valve
Heated automatic moisture ejector on air dryer
Total air system minimum capacity of 4,272 cubic inches Two (2) air pressure gauges with a red warning light and an audible alarm, that activates when air pressure falls below 60 psi
Spring set parking brake system
Parking brake operated by a push-pull style control valve A parking "brake on" indicator light on instrument panel Park brake relay/inversion and anti-compounding valve, in conjunction with a double check valve system, with an automatic spring brake application at 40 psi A pressure protection valve to prevent all air operated accessories from drawing air from the air system when the system pressure drops below 80 psi (550 kPa) 1/4 turn drain valves on each air tank
The air tank will be primed and painted to meet a minimum 750 hour salt spray test.

The air tanks will be painted same as frame color.

To reduce the effects of corrosion, the air tank will be mounted with stainless steel brackets. 0644228 Air Dryer, Wabco System Saver 1200
IWT, Heated, 10" Frame, Standen,
SFR/Enf

BRAKE SYSTEM AIR DRYER
The air dryer will be a WABCO System Saver 1200 IWT, with internal wet tank, spin-on coalescing filter cartridge and 100 watt heater.
0000790 Brake Lines, Nylon BRAKE LINES
Color-coded nylon brake lines will be provided. The lines will be wrapped in a heat protective loom in the chassis areas that are subject to excessive heat. 0813346 Inlet/Outlet, Air, w/Disconnect Fitting,
1/4 Turn Valve, Location

AIR INLET/OUTLET
One (1) air inlet/outlet will be installed with the female coupling located on the driver side pump panel. This system will tie into the "wet" tank of the brake system and include a check valve in the inlet line and an 85 psi pressure protection valve in the outlet line. The air outlet will be controlled by a 1/4 turn valve.

A mating male fitting will be provided with the loose equipment.

The air inlet will allow a shoreline air hose to be connected to the vehicle. This will allow station air to be supplied to the brake system of the vehicle to insure constant air pressure. 0675244 All Wheel Lock-up, Single Prk Brk
Control

ALL WHEEL LOCK-UP
An all wheel lock-up system will be installed which will apply air to the front brakes and use the spring brake at the rear.

Front brakes will apply when standard rear parking brake control valve is activated. 0615609 Fittings, Compression Type, Entire
Apparatus, Single Rear Axle

COMPRESSION FITTINGS ONLY
Any nylon tube on the apparatus that is pneumatic will be plumbed with compression type fittings where applicable. Push lock fittings will not be acceptable for any pneumatic nylon tube plumbing. 8969Bid #:
0808535 Engine, Cummins X10, 450 hp, 1250
lb-ft, W/OBD, EPA 2027, Saber
FR/Enforcer
ENGINE
The chassis will be powered by an electronically controlled engine as described below:

Make:

Cummins
Model:

X10
Power:
450 hp at 2100 rpm
Torque:
1250 lb-ft at 1200 rpm
Governed Speed:
2200 rpm
Emissions Level:

EPA 2027
Fuel:

Diesel
Cylinders:

Six (6)
Displacement:
604 cubic inches (9.9L)
Starter:

Delco 39MT™
Fuel Filters:

Spin-on style primary filter with water separator and water-in-fuel sensor. Secondary spin-on style filter.

The engine will include On-board diagnostics (OBD), which provides self diagnostic and reporting. The system will give the owner or repair technician access to state of health information for various vehicle sub systems. The system will monitor vehicle systems, engine and after treatment. The system will illuminate a malfunction indicator light on the dash console if a problem is detected.

The engine will be filled with FA-4 10W30 oil as required by Cummins. 0000000 STF Engine Contingency Adjustment
0001244 High Idle w/Electronic Engine,
Custom

HIGH IDLE
A high idle switch will be provided, inside the cab, on the instrument panel, that will automatically maintain a preset engine rpm. A switch will be installed, at the cab instrument panel, for activation/deactivation.

The high idle will be operational only when the parking brake is on and the truck transmission is in neutral. A green indicator light will be provided, adjacent to the switch. The light will illuminate when the above conditions are met. The light will be labeled "OK to Engage High Idle." 0687994 Engine Brake, Jacobs Compression
Brake, Cummins Engine

ENGINE BRAKE
A Jacobs® engine brake is to be installed with the controls located on the instrument panel within easy reach of the driver.

The driver will be able to turn the engine brake system on/off and have a high, medium and low setting.

The engine brake will activate when the system is on and the throttle is released.

The high setting of the brake application will activate and work simultaneously with the variable geometry turbo (VGT) provided on the engine.

The engine brake will be installed in such a manner that when the engine brake is slowing the vehicle the brake lights are activated.

The ABS system will automatically disengage the auxiliary braking device, when required. 0644227 Clutch, Fan, Air Actuated, Saber
FR/Enforcer

CLUTCH FAN
A fan clutch will be provided. The fan clutch will be automatic when the pump transmission is in "Road" position, and constantly engaged when in "Pump" position. 0640477 Air Intake, Metal Screen, Saber
FR/Enforcer

ENGINE AIR INTAKE
The engine air intake will be located above the engine cooling package. It will draw fresh air from the front of the apparatus through the radiator grille.

A stainless steel metal screen will be installed at the inlet of the air intake system that will meet current edition of applicable NFPA standards.

The air cleaner and stainless steel screen will be easily accessible by tilting the cab. 0814375 Exhaust System, Horizontal, Right
Side

EXHAUST SYSTEM
The exhaust system will be stainless steel from the turbo to the engine's aftertreatment device.

The exhaust system will include an aftertreatment device to meet current EPA standards. An insulation wrap will be provided on all exhaust pipe between the turbo and the aftertreatment device to minimize the transfer of heat to the cab.

The exhaust will terminate horizontally ahead of the right side rear wheels and will be flush with the body rub rail. The exhaust pipes will be aluminized steel.

There will be an aluminized steel exhaust diffuser with a standard straight tip on the end provided to reduce the temperature of the exhaust as it exits. Heat deflector shields will be provided to isolate chassis and body components from the heat of the tailpipe diffuser. 9969Bid #:
0816172 Adapter, Exhaust, Plymovent
Bladder, for 6" or 7" Diffuser Outlet

EXHAUST MODIFICATION
An adapter for the Plymovent bladder exhaust extraction system will be provided on the end of the tail pipe.
0788765 Radiator, Saber FR/Enforcer

RADIATOR
The radiator and the complete cooling system will meet or exceed the current edition of applicable NFPA and engine manufacturer cooling system standards.

For maximum corrosion resistance and cooling performance, the entire radiator core will be constructed using long life aluminum alloy. The radiator core will consist of aluminum fins, having a serpentine design, brazed to aluminum tubes.

The radiator core will have a minimum front area of 1060 square inches.

Supply tank will be made of heavy duty glass-reinforced nylon and the return tank will be made of aluminum. Both tanks will be crimped onto the core assembly using header tabs and a compression gasket to complete the radiator core assembly. There will be a full steel frame around the inserts to enhance cooling system durability and reliability.

The radiator will be compatible with commercial antifreeze solutions.

The radiator assembly will be isolated from the chassis frame rails with rubber isolators to prevent the development of leaks caused by twisting or straining when the apparatus operates over uneven terrain.

The radiator will include a de-aeration/expansion tank. For visual coolant level inspection, the radiator will have a built-in sight glass. The radiator will be equipped with a 15 psi pressure relief cap.

A drain port will be located at the lowest point of the cooling system and/or the bottom of the radiator to permit complete flushing of the coolant from the system.

Shields or baffles will be provided to prevent recirculation of hot air to the inlet side of the radiator. 0001090 Cooling Hoses, Rubber

COOLANT LINES
Gates, or Goodyear, rubber hose will be used for all engine coolant lines installed by Pierce Manufacturing.

Hose clamps will be stainless steel constant torque type to prevent coolant leakage. They will expand and contract according to coolant system temperature thereby keeping a constant clamping pressure on the hose.
0051125 Fuel Tank, 75 Gallon, Left Side Fill,
Qtm/AXT/Vel/Imp/SFR/Enf

FUEL TANK
A 75 gallon fuel tank will be provided and mounted at the rear of the chassis. The tank will be constructed of 12-gauge, hot rolled steel. It will be equipped with swash partitions and a vent. To eliminate the effects of corrosion, the fuel tank will be mounted with stainless steel straps.

A 0.75" drain plug will be located in a low point of the tank for drainage.

A fill inlet will be located on the left hand side of the body and is covered with a hinged, spring loaded, stainless steel door that is marked "Ultra Low Sulfur - Diesel Fuel Only." The fuel door will be polished stainless steel.

A 0.50" diameter vent will be installed from tank top to just below fuel fill inlet.

The fuel tank will meet all FHWA 393.67 requirements including a fill capacity of 95 percent of tank volume.
0001129 Lines, Fuel All fuel lines will be provided as recommended by the engine manufacturer. 0595087 DEF Tank, 4.5 Gallon, LS Fill,
Forward of Rear Axle

DIESEL EXHAUST FLUID TANK
A 4.5 gallon diesel exhaust fluid (DEF) tank will be provided and mounted in the left side body forward of the rear axle.

A 0.50" drain plug will be provided in a low point of the tank for drainage.

A fill inlet will be located on the left side of the body and be covered with a hinged, spring loaded, polished stainless steel door that is marked "Diesel Exhaust Fluid Only".

The tank will meet the engine manufacturers requirement for 10 percent expansion space in the event of tank freezing.

The tank will include an integrated heater unit that utilizes engine coolant to thaw the DEF in the event of freezing.
0723716 Fuel Priming Pump, Electronic,
Automatic, Cummins, No Swt Req'd

FUEL PRIMING PUMP
A Cummins automatic electronic fuel priming pump will be integrated as part of the engine. 0552607 Shutoff Valves (2), Fuel Line @ Filter

FUEL SHUTOFF
A shutoff valve will be installed in the fuel line, on both sides of the fuel filter. 0699437 Cooler, Chassis Fuel, Not Req'd.

0592809 Fuel Fill, Lower

FUEL FILL LOWERED
The fuel fill will be lowered.
0690880 No Selection Required From This
Category

10969Bid #:
0887559 Trans, Allison 6th Gen, 3000 EVS P,
w/Prognostics, Imp/Vel/SFR/Enf

TRANSMISSION
An Allison 6th generation, Model EVS 3000P, electronic torque converting automatic transmission will be provided.

The transmission will be equipped with prognostics to monitor oil life, filter life, and transmission health. A wrench icon on the shift selector's digital display will indicate when service is due.

Two (2) PTO openings will be located on both sides of converter housing (positions 4 o'clock and 8 o'clock) as viewed from the rear.

A transmission temperature gauge with amber light and audible alarm will be installed on the cab dash.
0625329 Transmission, Shifter, 5-Spd, Push
Button, 3000 EVS

TRANSMISSION SHIFTER
A five (5)-speed push button shift module will be mounted to right of driver on console. Shift position indicator will be indirectly lit for after dark operation.

The transmission ratio will be:
1st

3.49 to 1.00
2nd

1.86 to 1.00
3rd

1.41 to 1.00
4th

1.00 to 1.00
5th

0.75 to 1.00
R

5.03 to 1.00
0684459 Transmission Oil Cooler, Modine,
External

TRANSMISSION COOLER
A Modine plate and fin transmission oil cooler will be provided using engine coolant to control the transmission oil temperature.
0024895 Mode, Downshift, Aggressive
downshift to 2nd, w/engine brake, 5
speed
DOWNSHIFT MODE (w/engine brake)
The transmission will be provided with an aggressive downshift mode.

This will provide earlier transmission downshifts to 2nd gear, resulting in improved engine braking performance.
0801878 Fluid, 3000 Series Trans, Allison
Approved TES-668 Synthetic, IPOS,
Custom

TRANSMISSION FLUID
The transmission will be provided with TranSynd, or other Allison approved TES-668 heavy duty synthetic transmission fluid.
0001370 Driveline, Spicer 1710 DRIVELINE
Drivelines will be a heavy-duty metal tube and be equipped with Spicer® 1710 universal joints.

The shafts will be dynamically balanced before installation.

A splined slip joint will be provided in each driveshaft where the driveline design requires it. The slip joint will be coated with Glidecoat® or equivalent. 0669988 Steering, Sheppard M110 w/Tilt,
TAK-4, Eaton Pump, w/Cooler

STEERING
Dual Sheppard, Model M110, steering gears, with integral heavy-duty power steering, will be provided. For reduced system temperatures, the power steering will incorporate an air to oil cooler and an Eaton, Model VN20, hydraulic pump with integral pressure and flow control. All power steering lines will have wire braded lines with crimped fittings.

A tilt and telescopic steering column will be provided to improve fit for a broader range of driver configurations.
0605356 Steering Wheel, 4 Spoke without
Controls, Saber FR/Enforcer

STEERING WHEEL
The steering wheel will be 18.00" in diameter, have tilting and telescoping capabilities, and a 4- spoke design.
0550144 Logo/Emblem, on Horn Button

LOGO AND CUSTOMER DESIGNATION ON HORN BUTTON
The steering wheel will have an emblem containing the Pierce logo and customer name. The emblem will have three (3) rows of text for the customer's department name. There will be a maximum of eight (8) characters in the first row, 11 characters in the second row and 11 characters in the third row.

The first row of text will be: EVERYBODY
The second row of text will be: GOES
The third row of text will be: HOME
11969Bid #:
0624298 Bumper, 16" Extended, Saber
FR/Enforcer
BUMPER
A one (1) piece, ten (10) gauge, 304-2B type polished stainless steel bumper, minimum of 10.00" high, will be attached to a bolted modular extension frame constructed of 50,000 psi tensile steel "C" channel mounted directly behind it to provide adequate support strength.

The bumper will be extended 16.00" from front face of cab.

Gravel Pan
A gravel pan, constructed of bright aluminum treadplate, will be furnished between the bumper and cab face. The gravel pan will be properly supported from the underside to prevent flexing and vibration of the aluminum treadplate.
0640199 Tray, Hose, Center, 16" Bumper,
Outside Air Horns

CENTER HOSE TRAY
A hose tray, constructed of aluminum, will be placed in the center of the bumper extension.

The tray will have a capacity of 100' of 1.75" double jacket cotton-polyester hose.

Black rubber grating will be provided at the bottom of the tray. Drain holes are also provided. 0630809 Cover, Aluminum Treadplate, One (1)
D-Ring Latch, Hose Tray, Notched

Center Hose Tray Cover
A bright aluminum treadplate cover will be provided over the center hose tray.

The cover will be "notched" allowing the hose to be pre connected to hose connection.

The cover will be attached with a stainless steel hinge.

A D-ring latch will secure the cover in the closed position and a pneumatic stay arm will hold the cover in the open position. The arm will be located right side. 0614646 No Lift & Tow Package, Imp/Vel,
AXT, SFR/Enf
0628336 Tow Eyes, Painted, Below Deck,
Color Feature

TOW EYES
Two (2) painted steel tow eyes will be installed under the bumper and attached to the front frame members. The tow eyes will be designed and positioned to allow up to a 6,000 lb straight horizontal pull in line with the centerline of the vehicle. The tow eyes will not be used for lifting of the apparatus.

The inner and outer edges of the tow eyes will have a .25" radius.

The tow eyes will be painted red #90.
0030434 Travel Stops, Front Inlet/Outlet
Swivel, Qty & Location

SWIVEL STOPS
Installed on the front bumper extension will be two (2) sets of stainless steel rods to limit the travel of a front outlet or inlet swivel. Two (2) stainless steel rods, for each application, will be threaded into the bumper deck and mounted both IPO flange bolts on swivel closest to the cab. 12969Bid #:
0648332 Cab, Enforcer, 7010 CAB
The Enforcer cab will be designed specifically for the fire service and manufactured by the chassis builder.

The cab will be built by the apparatus manufacturer in a facility located on the manufacturer's premises.

For reasons of structural integrity and enhanced occupant protection, the cab will be a heavy duty design, constructed to the following minimal standards.

The cab will have 12 main vertical structural members located in the A-pillar (front cab corner posts), B-pillar (side center posts), C-pillar (rear corner posts), and rear wall areas. The A-pillar will be constructed of solid A356-T5 aluminum castings. The B-pillar and C-pillar will be constructed from 0.13" wall extrusions. The rear wall will be constructed of two (2) 2.00" x 2.00" outer aluminum extrusions and two (2) 2.00" x 1.00" inner aluminum extrusions. All main vertical structural members will run from the floor to 4.625" x 3.864" x 0.090" thick roof extrusions to provide a cage-like structure with the A-pillar and roof extrusions being welded into a 0.25" thick corner casting at each of the front corners of the roof assembly.

The front of the cab will be constructed of a 0.13" firewall plate, covered with a minimum 0.090" front skin thickness, and reinforced with a full width x 0.50" thick cross-cab support located just below the windshield and fully welded to the engine tunnel. The cross-cab support will run the full width of the cab and weld to each A-pillar, the 0.13" firewall plate, and the front skin.

The cab floors will be constructed of 0.125" thick aluminum plate and reinforced at the firewall with an additional 0.375" thick cross-floor support providing a total thickness of 0.50" of structural material at the front floor area. The front floor area will also be supported with two (2) triangular

0.30" wall extrusions that also provides the mounting point for the cab lift. This tubing will run from the floor wireway of the cab to the engine tunnel side plates, creating the structure to support the forces created when lifting the cab.

The cab will be 96.00" wide (outside door skin to outside door skin) to maintain maximum maneuverability.

The centerline of front axle to the rear of the cab will be 70.00" long.

The forward cab section will have an overall height (from the cab roof to the ground) of approximately 99.00". The crew cab section will have a 10.00" raised roof, with an overall cab height of approximately 109.00". The overall height listed will be calculated based on a truck configuration with the lowest suspension weight rating, the smallest diameter tires for the suspension, no water weight, no loose equipment weight, and no personnel weight. Larger tires, wheels, and suspension will increase the overall height listed.

The floor to ceiling height inside the crew cab will be 64.50" in the center and outboard positions.

The crew cab floor will measure 46.00" from the rear wall to the back side of the rear facing seat risers.

The medium block engine tunnel, at the rearward highest point (knee level), will measure 61.50" to the rear wall. The big block engine tunnel will measure between 45.00" and 51.50" to the rear wall.

The crew cab will be a totally enclosed design with the interior area completely open to improve visibility and verbal communication between the occupants.

The cab will be a full tilt cab style.

A 3-point cab mount system with rubber isolators will improve ride quality by isolating chassis vibrations from the cab.

CAB ROOF DRIP RAIL
For enhanced protection from inclement weather, a drip rail will be furnished on the sides of the cab. The drip rail will be painted to match the cab roof, and bonded to the sides of the cab. The drip rail will extend the full length of the cab roof.

FENDER LINERS
Full circular inner fender liners in the wheel wells will be provided.

PANORAMIC WINDSHIELD
A one (1)-piece safety glass windshield will be provided with over 2,775 square inches of clear viewing area. The windshield will be full width and will provide the occupants with a panoramic view. The windshield will consist of three (3) layers: outer light, middle safety laminate, and inner light. The outer light layer will provide superior chip resistance. The middle safety laminate layer will prevent the windshield glass pieces from detaching in the event of breakage. The inner light will provide yet another chip resistant layer. The cab windshield will be bonded to the aluminum windshield frame using a urethane adhesive. A custom frit pattern will be applied on the outside perimeter of the windshield for a finished automotive appearance.

WINDSHIELD WIPERS
Three (3) electric windshield wipers with washer will be provided that meet FMVSS and SAE requirements.

The washer reservoir will be able to be filled without raising the cab. 0647919 Engine Tunnel, ISL, Spray Insulation,
Saber FR/Enforcer

ENGINE TUNNEL
Engine hood side walls will be constructed of 0.375" aluminum. The top will be constructed of

0.125" aluminum and will be tapered at the top to allow for more driver and passenger elbow room.

The engine hood will be insulated for protection from heat and sound. The noise insulation keeps the dBA level within the limits stated in the current edition of applicable NFPA standards.

The engine tunnel will be no higher than 17.00" off the crew cab floor. 0887601 Cab Insulation, Enforcer/Saber FR INTERIOR CAB INSULATION The cab will include 1.00" insulation in the ceiling, 1.50" insulation in the side walls, a minimum of

1.00" insulation in the crew cab floor, and 2.00" insulation in the rear wall to maximize acoustic absorption and thermal insulation.
13969Bid #:
0633594 Rear Wall, Interior, Adjustable
Seating

INTERIOR CREW CAB REAR WALL ADJUSTABLE SEATING (PATENT PENDING) The interior rear wall of the crew cab will have mounting holes every 2.75" to allow for adjustability of the forward facing crew cab seating along the rear wall. Seats will be adjustable with use of simple hand tools allowing departments flexibility of their seating arrangement should their department needs change.
0632103 Rear Wall, Exterior, Cab, Saber
FR/Enforcer

CAB REAR WALL EXTERIOR COVERING
The exterior surface of the rear wall of the cab will be overlaid with bright aluminum treadplate except for areas that are not typically visible when the cab is lowered. 0639726 Cab Lift, Elec/Hyd, Manual Override,
Unlocked Ind Light, Saber
FR/Enforcer

CAB LIFT
A hydraulic cab lift system will be provided consisting of an electric powered hydraulic pump, dual lift cylinders, and necessary hoses and valves.

Hydraulic pump will have a manual override for backup in the event of electrical failure.

Lift controls will be located on the right side pump panel or front area of the body in a convenient location. A "cab unlocked" indicator light will be located at the controls that will indicate when the cab is not in the locked position for safe road travel.

The cab will be capable of tilting 43 degrees to accommodate engine maintenance and removal.

The cab will be locked down by a 2-point normally closed spring loaded hook type latch that fully engages after the cab has been lowered. The system will be hydraulically actuated to release the normally closed locks when the cab lift control is in the raised position and cab lift system is under pressure. When the cab is completely lowered and system pressure has been relieved, the spring loaded latch mechanisms will return to the normally closed and locked position.

The hydraulic cylinders will be equipped with a velocity fuse that protects the cab from accidentally descending when the control is located in the tilt position.

For increased safety, a redundant mechanical stay arm will be provided that must be manually put in place on the left side between the chassis and cab frame when the cab is in the raised position. This device will be manually stowed to its original position before the cab can be lowered.

Cab Lift Interlock
The cab lift system will be interlocked to the parking brake. The cab tilt mechanism will be active only when the parking brake is set and the ignition switch is in the on position. If the parking brake is released, the cab tilt mechanism will be disabled. 0751131 Grille, Bright Finished, Painted Mesh
Screen, Front of Cab, Enforcer
GRILLE
An aluminum mesh grille screen, inserted behind a bright finished grille surround, will be provided on the front center of the cab. The mesh screen will be painted black #101. 0002224 Scuffplates, S/S At Cab Door Jambs,
4-Door Cab

DOOR JAMB SCUFFPLATES
All cab door jambs will be furnished with a 1.00" polished stainless steel scuffplate, mounted on the striker side of the jamb.
0620047 Scuffplates, S/S Corner Guard,
Polished, Rear Cab Corners, 2"

SCUFFPLATES, REAR CAB CORNER GUARDS
Both rear cab corners will be furnished with a full height, polished stainless steel corner guard scuffplate. The guard will extend 2.00" from the corner to protect paint from damage when pulling items (such as booster hose) around the cab.
0647932 Not Required, Trim, S/S Band,
Across Cab Face,
AXT/Saber/Enforcer
0015440 No Chrome Molding, On side of cab

0569263 Mirrors, Retrac, West Coast Style,
Remote, w/Remote Convex

MIRRORS
A Retrac Aerodynamic, Model 613295, dual vision, motorized, west coast style mirror with chrome finish will be mounted on each side of the front cab door with spring loaded retractable arms. The flat glass and convex glass will be adjustable with a remote control within reach of the driver.
14969Bid #:
0648170 Door, Half-Height, Saber FR/Enforcer
4-Door Cab, Raised Roof
DOORS
To enhance entry and egress to the cab, the forward cab door openings will be a minimum of

37.50" wide x 63.37" high. The crew cab doors will be located on the sides of the cab and will be constructed in the same manner as the forward cab doors. The crew cab door openings will be a minimum of 34.30" wide x 73.25" high.

The forward cab and crew cab doors will be constructed of extruded aluminum with a nominal material thickness of 0.093". The exterior door skins will be constructed from 0.090" aluminum.

A customized, vertical, pull-down type door handle will be provided on the exterior of each cab door. The finish of the door handle will be chrome/black. The exterior handle will be designed specifically for the fire service to prevent accidental activation, and will provide 4.00" wide x 2.00" deep hand clearance for ease of use with heavy gloved hands.

Each door will also be provided with an interior flush, open style paddle handle that will be readily operable from fore and aft positions, and be designed to prevent accidental activation. The interior handles will provide 4.00" wide x 1.25" deep hand clearance for ease of use with heavy gloved hands.

The cab doors will be provided with both interior (rotary knob) and exterior (keyed) locks exceeding FMVSS standards. The keys will be Model 751. The locks will be capable of activating when the doors are open or closed. The doors will remain locked if locks are activated when the doors are opened, then closed.

A full length, heavy duty, stainless steel, piano-type hinge with a 0.38" pin and 11 gauge leaf will be provided on all cab doors. There will be double automotive-type rubber seals around the perimeter of the door framing and door edges to ensure a weather-tight fit.

A chrome grab handle will be provided on the inside of each cab door for ease of entry.

A red webbed grab handle will be installed on the crew cab door stop strap. The grab handles will be securely mounted.

The bottom cab step at each cab door location will be located below the cab doors and will be exposed to the exterior of the cab.
0655543 Door Panel, Brushed Stainless Steel,
Saber/Enforcer 4-Door Cab

Door Panels
The inner cab door panels will be constructed out of brushed stainless steel. 0630636 Controls, Electric Roll-Up Windows,
4dr, 4 Driver Controls, Saber
FR/Enforcer

ELECTRIC OPERATED CAB DOOR WINDOWS
All four (4) cab doors will be equipped with electric operated windows with one (1) flush mounted automotive style switch on each door. The driver's door will have four (4) switches, one (1) to control each door window.

Each switch will allow intermittent or auto down operation for ease of use. Auto down operation will be actuated by holding the window down switch for approximately 1 second. 0528251 Electric Door Locks, Cab Doors,
QXS, AXT, Sab, Enf

ELECTRIC CAB DOOR LOCKS
The front driver and officer doors will have a door lock master switch that will control all front and rear crew cab door locks. Each rear crew cab door will have its own lock control.

There will be one (1) concealed switch located in an easily accessible chassis specific location that will unlock all the doors.
0528263 Key Pad, Electric Door locks, DS &
PS, QXS, AXT, Sab, Enf

KEY PAD FOR ELECTRIC DOOR LOCKS
For improved convenience, the cab door locks will include a Trimark keypad entry system to provide complete keyless entry to the cab. There will be two (2) keypads provided, located one (1) each side of the cab behind the front cab doors. The keypads will include visual and audio feedback to confirm activation and acknowledge correct entry code. For enhanced night time use, the keypads will be lighted. For increased security, the system will allow over 3,000 possible code combinations.
0633615 Steps, 4-Door Cab, Reduced Bottom
Step, Saber FR/Enforcer

CAB STEPS
The forward cab and crew cab access steps will be a full size two (2) step design to provide largest possible stepping surfaces for safe ingress and egress. The bottom steps will be designed with a grip pattern punched into bright aluminum treadplate material to provide support, slip resistance, and drainage. The bottom steps will be a bolt-in design to minimize repair costs should they need to be replaced. The forward cab steps will be a minimum 25.00" wide, and the crew cab steps will be 21.65" wide with an 8.00" minimum depth. The inside cab steps will not exceed 16.50" in height.

The vertical surfaces of the step well will be aluminum treadplate. 0770194 Handrail, Exterior, Knurled, Alum, 4-
Door Cab

CAB EXTERIOR HANDRAILS
A 1.25" diameter slip-resistant, knurled aluminum handrail will be provided adjacent to each cab and crew cab door opening to assist during cab ingress and egress. 15969Bid #:
0892638 Lights, Cab & Crw Cab Acs Stps,
P25, LED w/Bezel, 6lts

STEP LIGHTS
There will be six (6) white LED step lights with chrome housing installed for cab and crew cab access steps.

One (1) light for the left side cab access steps.

Two (2) lights for the left side crew cab access steps.

Two (2) lights for the right side crew cab access steps.

One (1) light for the right side cab access step.

In order to ensure exceptional illumination, each light will provide a minimum of 25 foot-candles (fc) covering an entire 15" x 15" square placed ten (10) inches below the light and a minimum of

1.5 fc covering an entire 30" x 30" square at the same ten (10) inch distance below the light.

The lights will be activated when the battery switch is on and the adjacent door is opened. 0583698 Fenders, S/S on cab, Extra Wide,
Saber/Enf

FENDER CROWNS
Stainless steel fender crowns will be installed at the cab wheel openings. 0042105 No Windows, Side of Crew Cab

0012090 Not Required, Windows, Front/Side
of raised roof
0779033 Not Required, Windows Rear of Crew
Cab, Saber FR/Enforcer

0813747 Compt, 16.50 W x 28 H x 15 D, Ea
Side C/C, Dbl Pan, 2.5" Blw, 70"
SFR/Enf

STORAGE COMPARTMENTS
Provided on each side of the cab, to the rear of the crew cab access doors, will be a storage compartment.

The compartments will be 16.50" wide x 28.00" high x 15.00" deep. The floor of each compartment will extend 2.50" below the cab. The exterior of the compartments that extend below the cab will be covered with aluminum treadplate.

There will be two (2) reverse hinged double pan doors painted to match the cab exterior with a non-locking D-Ring latch, one (1) on each side of the cab. A pneumatic stay arm for each exterior door will be provided as a door stop. The clear door openings will be 10.25" wide x 22.50" high.

The compartment interior will be painted to match the cab interior.

Compartment Light
There will be two (2) white LED strip lights provided, one (1) each hinged side of compartment door openings.
0809595 Arm Rest, Side of Engine Tunnel,
Each

ARM REST ON SIDE OF ENGINE TUNNEL
There will be two (2) padded arm rest(s) provided on the side of the engine tunnel, One (1) LS and One (1) RS of Engine Tunnel. The arm rest padding will match the seat upholstery. 0619947 Lip, Dash Board, 1.00" Aluminum
Angle Lip, Officer Side

EQUIPMENT MOUNTING AREA
There will be an aluminum angle with a 1.00" lip installed on the dash to prevent items from sliding off the dash panel.

The angle will run full length across the front, flat portion of the dashboard closest to the officer.

The lip will be painted to match the cab interior.
0722796 Dash, Poly, Saber FR/Enforcer

CAB DASH
The driver side dash, switch panel located to the right of the driver, and center console will be an easily removable high impact resistant polymer cover.

The instrument gauge cluster will be surrounded with a high impact ABS plastic contoured to the same shape of the instrument gauge cluster.

The officer side dash will be a flat top design with an upper beveled edge to provide easy maintenance and will be constructed out of aluminum and painted to match the cab interior. 0634206 Mounting Provisions, 1/4" Alum, Full
Engine Tunnel, Saber FR/Enforcer

MOUNTING PLATE ON ENGINE TUNNEL
Equipment installation provisions will be installed on the engine tunnel.

A 0.25" smooth aluminum plate will be bolted to the top surface of the engine tunnel. The plate will follow the contour of the engine tunnel and will run the entire length of the engine tunnel. The plate will be spaced off the engine tunnel 1.00" to allow for wire routing below the plate.

The mounting surface will be painted to match the cab interior. 0606278 Tray, Equipment Mounting,
Aluminum, Lip, Size

EQUIPMENT MOUNTING TRAY(S)
There will be two (2) tray(s) for mounting of equipment located top of the engine tunnel, please leave loose until final.

Each tray will have a 1.00" lip on four (4) sides. The size of the tray(s) will be 13"W x 22"L x 1"D for the engine tunnel.

Each tray will be fabricated from aluminum and will be painted to match the cab interior.

Tray not intended for storage of loose equipment. Items stored on tray will be permanently attached to meet current edition of applicable NFPA standards. 16969Bid #:
0750824 Cab Interior, Vinyl Headliner, Saber
FR/Enforcer, CARE

CAB INTERIOR
The cab interior will be constructed of primarily metal (painted aluminum) to withstand the severe duty cycles of the fire service.

The engine tunnel will be padded and covered, on the top and sides, with black 36 ounce leather grain vinyl resistant to oil, grease, and mildew.

For durability and ease of maintenance, the cab interior side walls will be painted aluminum. The rear wall will be painted aluminum.

The headliner will be installed in both forward and rear cab sections. Headliner material will be vinyl. A sound barrier will be part of its composition. Material will be installed on an aluminum sheet and securely fastened to interior cab ceiling.

The forward portion of the cab headliner will permit easy access for service of electrical wiring or other maintenance needs.

All wiring will be placed in metal raceways.

CAB INTERIOR UPHOLSTERY
The cab interior upholstery will be 36 oz black vinyl.
0753903 Cab Interior, Paint Color, Saber
FR/Enforcer

CAB INTERIOR PAINT
The cab interior metal surfaces, excluding the rear heater panels, will be painted black, vinyl texture paint.

The rear heater panels will be painted black, vinyl textured paint. 0052100 Floor, Rubber Padded, Cab & Crew
Cab, Saber/Enforcer

CAB FLOOR
The cab and crew cab floor areas will be covered with Polydamp™ acoustical floor mat consisting of a black pyramid rubber facing and closed cell foam decoupler.

The top surface of the material has a series of raised pyramid shapes evenly spaced, which offer a superior grip surface. Additionally, the material has a 0.25" thick closed cell foam (no water absorption) which offers a sound dampening material for reducing sound levels. 0722696 HVAC, Standard-Duty, Enforcer,
CARE

DEFROST/AIR CONDITIONING SYSTEM
A ceiling mounted combination heater, defroster and air conditioning system will be installed in the cab above the engine tunnel area.

Cab Defroster
A 54,000 BTU heater-defroster unit with 690 SCFM of air flow will be provided inside the cab. The heater-defrost will be installed in the forward portion of the cab ceiling. Air outlets will be strategically located in the cab header extrusion per the following:

One (1) adjustable outlet directed towards the left side cab window.

One (1) adjustable outlet directed towards the right side cab window.

Six (6) fixed outlets directed at the windshield.

The defroster will be capable of clearing 98 percent of the windshield and side glass when tested under conditions where the cab has been cold soaked at 0 degrees Fahrenheit for 10 hours, and a 2 ounce per square inch layer of frost/ice has been able to build up on the exterior windshield.

The defroster system will meet or exceed SAE J382 requirements.

Cab/Crew Auxiliary Heater
There will be one (1) 31,000 BTU auxiliary heater with 560 SCFM of air flow provided in each outboard rear facing seat riser with a dual scroll blower. An aluminum plenum incorporated into the cab structure to be used to transfer heat to the forward positions.

Air Conditioning
A condenser will be a 59,644 BTU output that meets and exceeds the performance specification will be mounted on the radiator.

The air conditioning system will be capable of cooling the average cab temperature from 100 degrees Fahrenheit to 75 degrees Fahrenheit at 50 percent relative humidity within 30 minutes.

The cooling performance test will be run only after the cab has been heat soaked at 100 degrees Fahrenheit for a minimum of 4 hours.

The evaporator unit will be installed in the rear portion of the cab ceiling over the engine tunnel.

The evaporator will include one (1) high performance heating core, one (1) high performance cooling core with (1) plenum directed to the front and one (1) plenum directed to the rear of the cab. The rear plenum will be covered with a metal cover painted to match the cab interior.

The evaporator unit will have a 52,000 BTU at 690 SCFM rating that meets and exceeds the performance specifications.

Adjustable air outlets will be strategically located on the forward plenum cover per the following:

Four (4) outlets directed towards the seating position on the left side of the cab.

Four (4) outlets directed towards the seating position on the right side of the cab.

Adjustable air outlets will be strategically located on the rear plenum cover per the following:

Minimum of five (5) outlets directed towards crew cab area.

A high efficiency particulate air (HEPA) filter will be included for the system. Access to the filter cover will be hinged with two (2) thumb latches.

The air conditioner refrigerant will be R-134A and will be installed by a certified technician.

Climate Control
An automotive style controller will be provided to control the heat and air conditioning system within the cab. The controller will have three (3) functional knobs for fan speed, temperature, and air flow distribution (front to rear) control.

The system will control the temperature of the cab and crew cab automatically by pushing the center of the fan speed control knob. Rotate the center temperature control knob to set the cab and crew cab temperature.

The AC system will be manually activated by pushing the center of the temperature control knob.

Pushing the center of the air flow distribution knob will engage the AC for max defrost, setting the fan speeds to 100 percent and directing all air flow to the overhead forward position.

The system controller will be located within panel position #12.

Gravity Drain Tubes
Two (2) condensate drain tubes will be provided for the air conditioning evaporator. The drip pan will have two (2) drain tubes plumbed separately to allow for the condensate to exit the drip pan.

No pumps will be provided.
17969Bid #:
0639675 Sun Visor, Smoked Lexan, AXT,
Imp/Vel, SFR/Enf

SUN VISORS
Two (2) smoked Lexan™ sun visors will be provided. The sun visors will be located above the windshield with one (1) mounted on each side of the cab.

There will be a black plastic thumb latch provided to help secure each sun visor in the stowed position.
0634328 Grab Handles, Driver and Officer
Door Posts, SFR/Enf

GRAB HANDLES
A black rubber covered grab handle will be mounted on the door post of the driver and officer's side cab door to assist in entering the cab. The grab handles will be securely mounted to the post area between the door and windshield.
0583938 Lights, Engine Compt, Custom, Auto
Sw, Wln 3SC0CDCR, 3" LED, Trim

ENGINE COMPARTMENT LIGHTS
There will be one (1) Whelen, Model 3SC0CDCR, 12 volt DC, 3.00" white LED light(s) with Whelen, Model 3FLANGEC, chrome flange kit(s) installed under the cab to be used as engine compartment illumination.

These light(s) will be activated automatically when the cab is raised. 0631830 Fluid Check Access, Saber
FR/Enforcer, Arrow XT

ACCESS TO ENGINE DIPSTICKS
For access to the engine oil and transmission fluid dipsticks, there will be a door on the engine tunnel, inside the crew cab. The door will be on the rear wall of the engine tunnel, on the vertical surface.

The engine oil dipstick will allow for checking only. The transmission dipstick will allow for both checking and filling.

The door will have a rubber seal for thermal and acoustic insulation. One (1) flush lift and turn latch will be provided on the access door.
0599959 Straps, Velcro, Map Box, Custom
Chassis

VELCRO STRAP(S) FOR MAP BOX
There will be one (1) Velcro® strap(s) installed at final inspection. 0770893 Mounting Bracket, Map Box, Leveling

MAP BOX MOUNTING BRACKET
A bracket will be provided under the map box to keep it level on the engine tunnel. 0013560 Map box, 5 bin/30 Deg Slant, AXT,
Imp/Vel, SFR/Enf

MAP BOX
A map box with five (5) bins, open at the top, will be installed RS EMS cabinet on exterior inboard side wall of cabinet with each bin being 12.50" wide x 2.25" high x 12.00" deep. Each bin will slant 30 degrees from horizontal. The map box will be constructed of .125" aluminum and will be painted to match the cab interior.
0583039 Not Required, Side Roll and Frontal
Impact Protection
0622618 Seating Capacity, 5 Belted Seats SEATING CAPACITY The seating capacity of the vehicle (including tiller cab and belted seat positions in the rescue body) will be five (5).
0636957 Seat, Driver, Pierce PSV, Air Ride,
High Back, PRIMARY, SFR/Enf

DRIVER SEAT
A seat will be provided in the cab for the driver. The seat design will be a cam action type, with air suspension. For increased convenience, the seat will include a manual control to adjust the horizontal position (6.00" travel). The manual horizontal control will be a towel-bar style located below the forward part of the seat cushion. To provide flexibility for multiple driver configurations, the seat will have an adjustable reclining back. The seat back will be a high back style with side bolster pads for maximum support. For optimal comfort, the seat will be provided with 17.00" deep foam cushions designed with EVC (elastomeric vibration control).

The seat will be furnished with a 3-point, shoulder type seat belt. 0632923 Seat, Officer, Pierce PSV, Air Ride,
High Back, PRIMARY, SFR/Enf

OFFICER SEAT
A seat will be provided in the cab for the passenger. The seat design will be a cam action type, with air suspension. The seat back will be a high back style with 9 degree fixed recline angle and side bolster pads for maximum support. For optimal comfort, the seat will be provided with 17.00" deep foam cushions designed with EVC (elastomeric vibration control).

The seat will be furnished with a 3-point, shoulder type seat belt. 0002517 Not Required, Radio Compartment
18969Bid #:
0748169 SP Cabinet, Rear Facing, LS, 26.75 W x
30 H x 23 D, Ext Acc Only, SFR/Enf

REAR FACING LEFT SIDE CABINET
A rear facing cabinet will be provided in the crew cab at the left side outboard position.

The cabinet will be 26.75" wide x 30.00" high x 23.00" deep.

The cabinet will include no adjustable shelves or traysin the cabinet interior.

The cabinet will include no louvers.

The cabinet will provide access only from outside the cab with one (1) reverse hinged double pan door painted to match the cab exterior with a non-locking D-ring latch. The door will be located on the side of the cab over the wheelwell. A pneumatic stay arm will be provided as a door stop. The clear door opening will be 17.00" wide x 27.50" high.

The exterior access will be provided with a brushed stainless steel scuffplate on the lower door frame.

The cabinet will be constructed of smooth aluminum and painted to match the cab interior.

Cabinet Light
There will be one (1) white LED strip light installed on the right side of the exterior cabinet door opening. The lighting will be controlled by an automatic door switch. 0102783 Not Required, Seat, Rr Facing C/C,
Center
0748168 SP Cabinet, Rear Facing, RS, 26.75 W x
30 H x 22 D, Ext Acc Only, SFR/Enf

REAR FACING RIGHT SIDE CABINET
A rear facing cabinet will be provided in the crew cab at the right side outboard position.

The cabinet will be 26.75" wide x 30.00" high x 22.00" deep.

The cabinet will include no adjustable shelves or traysin the cabinet interior.

The cabinet will include no louvers.

The cabinet will also provide access from outside the cab with one (1) reverse hinged double pan door painted to match the cab exterior with a non-locking D-ring latch. A pneumatic stay arm will be provided as a door stop. The exterior clear door opening will be 17.00" wide x 27.50" high.

The exterior access will be provided with a brushed stainless steel scuffplate on the lower door frame.

The cabinet will be constructed of smooth aluminum, and painted to match the cab interior.

Cabinet Light
There will be one (1) white LED strip light installed on the left side of the exterior cabinet door opening. The lights will be controlled by an automatic door switch. 0632947 Seat, Fwd Fcng C/C, LS Otbrd,
Pierce PSV, SCBA, Foldup,
SECONDARY, SFR/Enf

FORWARD FACING DRIVER SIDE OUTBOARD SEAT
There will be one (1) forward facing, foldup seat provided at the driver side outboard position in the crew cab. For optimal comfort, the seat will be a minimum of 15.00" from the front of the cushion to the face of the seat back and designed with EVC (elastomeric vibration control).

The seat back will be an SCBA style with 90 degree back. The SCBA cavity will be adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA cylinders. Moving the SCBA cavity will be accomplished by unbolting, relocating, and re-bolting it in the desired location.

The seat will be furnished with a 3-point, shoulder type seat belt. 0632657 Seat, Fwd Fcng C/C, Ctr, (1) Pierce
PSV, SCBA, SECONDARY, SFR/Enf

FORWARD FACING CENTER SEAT
There will be one (1) forward facing seat provided at the center position in the crew cab. For optimal comfort, the seat will be provided with 15.00" deep foam cushion designed with EVC (elastomeric vibration control).

The seat back will be an SCBA style with 90 degree back. The SCBA cavity will be adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA cylinders. Moving the SCBA cavity will be accomplished by unbolting, relocating, and re-bolting it in the desired location.

The seat will be furnished with a 3-point, shoulder type seat belt. 0632875 Seat, Fwd Fcng C/C, RS Otbrd,
Pierce PSV, Hi-Back, Foldup,
SECONDARY, SFR/Enf

FORWARD FACING PASSENGER SIDE OUTBOARD SEAT
There will be one (1) forward facing foldup seat provided at the passenger side outboard position in the crew cab. The seat back will be a high back style with 9 degree fixed recline angle. For optimal comfort, the seat will be a minimum of 15.00" from the front of the cushion to the face of the seat back and designed with EVC (elastomeric vibration control).

The seat will be furnished with a 3-point, shoulder type seat belt. 0752005 Lip, Top of Interior Cabinet, All Sides LIP ON CABINET There will be a 1.00" lip provided around the top perimeter of the cabinet. There will NOT be anything stored on the top portion without restraints.

There will be two (2) cabinets(s) provided with the lip each EMS compartment. 19969Bid #:
0748170 SP Cabinet, Rr Fcng, Top Eng Tnl, 38 W
x 15 H x 18 D, Web, Notch, SFR/Enf

REAR FACING CENTER CABINET
A rear facing cabinet will be provided on the top rear of the engine tunnel.

The cabinet will be 38.00" wide x 15.00" high x 18.00" deep. The bottom of the cabinet will taper to match the angle of the engine tunnel. The back corners of the cabinet will be notched around the gravity drains.

The interior door will be web netting. The netting will be made with 1.00" wide nylon material with

2.00" openings. The nylon webbing will be permanently fastened at the bottom side of the cabinet and have 1.00" cam buckle fasteners on the opposite side to secure it. The clear door opening of the cabinet will be 35.50" wide x 12.00" high.

The cabinet will include one (1) infinitely adjustable shelf with a 1.25" up-turned lippainted to match the cab interior.

The cabinet will include no louvers.

The cabinet will be constructed of smooth aluminum, and painted to match the cab interior.

Cabinet Light
There will be one (1) white LED strip light installed horizontally above the interior cabinet door opening. The lighting will be controlled by a rocker switch on the front of the cabinet. 0566653 Upholstery, Seats In Cab, Turnout
Tuff

SEAT UPHOLSTERY
All seat upholstery will be black Turnout Tuff material. 0543991 Bracket, Air Bottle, Hands-Free II,
Cab Seats

AIR BOTTLE HOLDERS
All SCBA type seats in the cab will have a "Hands-Free" auto clamp style bracket in its backrest.

For efficiency and convenience, the bracket will include an automatic spring clamp that allows the occupant to store the SCBA bottle by simply pushing it into the seat back. For protection of all occupants in the cab, in the event of an accident, the inertial components within the clamp will constrain the SCBA bottle in the seat and will exceed the NFPA standard of 9G.

There will be a quantity of two (2) SCBA brackets.
0733995 SP Spacer, Leveler, Driver/Officer PSV
Air Ride Seat

SEAT SPACER
There will be a spacer provided between the suspension and seat cushion on the driver and officer air ride seats. The spacer will level the seat cushion. 0697223 SP Seat Mounting, Forward Facing,
Moved Rearward

SPECIAL SEAT MOUNTING
All forward facing seats will be mounted as far rearward as possible without having the front of the seat further back than the front of the seat riser. 0603866 Seat Belt, Dual Retractor,
ReadyReach, Saber FR/Enforcer

SEAT BELTS
All cab and tiller cab (if applicable) seating positions will have red seat belts. To provide quick, easy use for occupants wearing bunker gear, the female buckle and seat belt webbing length will meet or exceed the current edition of applicable NFPA and CAN/ULC - S515 standards.

The 3-point shoulder type seat belts will include height adjustment. This adjustment will optimize the belts effectiveness and comfort for the seated firefighter. The 3-point shoulder type seat belts will be furnished with dual automatic retractors that will provide ease of operation in the normal seating position.

The 3-point shoulder type belts will also include the ReadyReach® D-loop assembly to the shoulder belt system. The ReadyReach feature adds an extender arm to the D-loop location placing the D-loop in a closer, easier to reach location.

Any flip up seats will include a 3-point shoulder type belts only.

To ensure safe operation, the seats will be equipped with seat belt sensors in the seat cushion and belt receptacle that will activate an alarm indicating a seat is occupied but not buckled. 0817557 Helmet Storage, Provided by Fire
Department, NFPA/ULC 2024

HELMET STORAGE PROVIDED BY FIRE DEPARTMENT
NFPA 1900, 2024 edition, section 11.1.8.4.1 and CAN/ULC 515:2024 edition, section 5.2, requires a location for helmet storage be provided.

There is no helmet storage on the apparatus as manufactured. The fire department will provide a location for storage of helmets.
0647647 Lights, Dome, FRP Dual LED 4 Lts CAB DOME LIGHTS There will be four (4) dual LED dome lights with black bezels provided. Two (2) lights will be mounted above the inside shoulder of the driver and officer and two (2) lights will be installed and located, one (1) on each side of the crew cab.

The color of the LED's will be red and white.

The white LED's will be controlled by the door switches and the lens switch.

The color LED's will be controlled by the lens switch.

All dome lights on the apparatus will be illuminated per the current edition of applicable NFPA standards per seating position.
0896451 Enhanced Software for Cab and
Crew Cab Dome Lts

ENHANCED SOFTWARE FOR CAB AND CREW CAB DOME LIGHTS
The cab and crew cab dome lights will remain on for 10 seconds for improved visibility after the doors are closed.

The dome lights will dim after 10 seconds or immediately if the vehicle's transmission is put into gear.
20969Bid #:
0626097 Light, Map, Sunnex HS76*-00 Series,
Swivel Joint, Clear Lens, Ceiling
Mount

MAP LIGHT
There will be one (1) Sunnex®, HS76*-00, halogen map light(s) with swivel joint base provided in the cab and located over officer side left shoulder. Each map light will have a square base with an on/off switch.

The light(s) will also be provided with a red lens.

The light switch(es) will be connected directly to the battery switched power. 0804719 Handlts, (4) Streamlight, Fire Vulcan,
44451, C4 LED, Tail Lts, 12v, Orange

HAND HELD LIGHT
There will be four (4) Streamlight, Fire Vulcan, Model #44451, hand lights provided with a vehicle mount with 12VDC direct wire charging rack and quick release buckle strap mounted Crew Cab, One (1) Under PS forward facing Seat, One (1) DS under forward facing seat, One (1)in LS3 and One (1) in RS3 final location at precon.

Each light housing will be orange in color and be provided with a C4, LED and two (2) "ultra bright blue tail light LEDs". The tail light LEDs will have a dual mode of blinking or steady. 0622803 Cab Instruments, Black Gauges,
Black Bezels, Enforcer MUX

CAB INSTRUMENTATION
The cab instrument panel include gauges, an LCD display, telltale indicator lamps, control switches, alarms, and a diagnostic panel. The function of the instrument panel controls and switches will be identified by a label adjacent to each item. Actuation of the headlight switch will illuminate the labels in low light conditions. Telltale indicator lamps will not be illuminated unless necessary. The cab instruments and controls will be conveniently located within the forward cab section, forward of the driver. The gauge assembly and switch panels are designed to be removable for ease of service and low cost of ownership.

Gauges
The gauge panel will include the following ten (10) black faced gauges with black bezels to monitor vehicle performance:

Voltmeter gauge (volts):

Low volts (11.8 VDC)
Amber caution indicator on the information center with intermittent alarm Amber caution light on gauge assembly
High volts (15.5 VDC)
Amber caution indicator on the information center with intermittent alarm Amber caution light on gauge assembly
Very low volts (11.3 VDC)
Red warning indicator on the information center with a steady alarm Amber caution light on gauge assembly
Very high volts (16.0 VDC)
Red warning indicator on the information center with a steady alarm Amber caution light on gauge assembly
Engine Tachometer (RPM)
Speedometer MPH (Major Scale), KM/H (Minor Scale)
Fuel level gauge (Empty - Full in fractions):

Low fuel (1/8 full)
Amber caution indicator on the information center with intermittent alarm Amber caution light on gauge assembly
Very low fuel (1/32 full)
Red caution indicator on the information center with steady alarm Amber caution light on gauge assembly
Engine Oil pressure Gauge (PSI):

Low oil pressure to activate engine warning lights and alarms Red caution indicator on the information center with steady alarm Amber caution light on gauge assembly
Front Air Pressure Gauges (PSI):

Low air pressure to activate warning lights and alarm
Red warning indicator on the information center with a steady alarm Amber caution light on gauge assembly
Rear Air Pressure Gauges (PSI):

Low air pressure to activate warning lights and alarm
Red warning indicator on the information center with a steady alarm Amber caution light on gauge assembly
Transmission Oil Temperature Gauge (Fahrenheit):

High transmission oil temperature activates warning lights and alarm Amber caution indicator on the information center with intermittent alarm Amber caution light on gauge assembly
Engine Coolant Temperature Gauge (Fahrenheit):

High engine temperature activates an engine warning light and alarms Amber caution indicator on the information center with intermittent alarm Amber caution light on gauge assembly
Diesel Exhaust Fluid Level Gauge (Empty - Full in fractions):

Low fluid (1/8 full)
Amber indicator light in gauge dial
All gauges will perform prove out at initial power-up to ensure proper performance.

Indicator Lamps
To promote safety, the following telltale indicator lamps will be located on the instrument panel in clear view of the driver. The indicator lamps will be "dead-front" design that is only visible when active. The colored indicator lights will have descriptive text or symbols.

The following amber telltale lamps will be present:

Low coolant
Trac cntl (traction control) (where applicable)
Check engine
Check trans (check transmission
Aux brake overheat (Auxiliary brake overheat
Air rest (air restriction)
Caution (triangle symbol)
21969Bid #:

Water in fuel
DPF (engine diesel particulate filter regeneration)
Trailer ABS (where applicable)
Wait to start (where applicable)
HET (engine high exhaust temperature) (where applicable) ABS (antilock brake system)
MIL (engine emissions system malfunction indicator lamp) (where applicable) Side roll fault (where applicable)
Front air bag fault (where applicable)
The following red telltale lamps will be present:

Warning (stop sign symbol)
Seat belt
Parking brake
Stop engine
Rack down
The following green telltale lamps will be provided:

Left turn
Right turn
Battery on
The following blue telltale lamp will be provided:

High beam
Alarms
Audible steady tone warning alarm: A steady audible tone alarm will be provided whenever a warning message is present.

Audible pulsing tone caution alarm: A pulsing audible tone alarm (chime/chirp) will be provided whenever a caution message is present without a warning message being present.

Alarm silence: Any active audible alarm will be able to be silenced by holding the ignition switch at the top position for three (3) to five (5) seconds. For improved safety, silenced audible alarms will intermittently chirp every 30 seconds until the alarm condition no longer exists. The intermittent chirp will act as a reminder to the operator that a caution or warning condition still exists. Any new warning or caution condition will enable the steady or pulsing tones respectively.

Indicator Lamp and Alarm Prove-Out
A system will be provided which automatically tests telltale indicator lights and alarms located on the cab instrument panel. Telltale indicators and alarms will perform prove-out at initial power-up to ensure proper performance.

Control Switches
For ease of use, the following controls will be provided immediately adjacent to the cab instrument panel within easy reach of the driver. All switches will have backlit labels for low light applications.

Headlight/Parking light switch: A three (3)-position maintained rocker switch will be provided. The first switch position will deactivate all parking and headlights. The second switch position will activate the parking lights. The third switch will activate the headlights.

Panel back lighting intensity control switch: A three (3)-position momentary rocker switch will be provided. Pressing the top half of the switch, "Panel Up" increases the panel back lighting intensity and pressing the bottom half of the switch, "Panel Down" decreases the panel back lighting intensity. Pressing the half or bottom half of the switch several times will allow back lighting intensity to be gradually varied from minimum to maximum intensity level for ease of use.

Ignition switch: A three (3)-position maintained/momentary rocker switch will be provided.

The first switch position will turn off and deactivate vehicle ignition. The second switch position will activate vehicle ignition and will perform prove-out on the telltale indicators and alarms for 3 to 5 seconds after the switch is turned on. A green indicator lamp is activated with vehicle ignition. The third momentary position will temporarily silence all active cab alarms. An alarm "chirp" may continue as long as alarm condition exists.

Switching ignition to off position will terminate the alarm silence feature and reset function of cab alarm system.

Engine start switch: A two (2)-position momentary rocker switch will be provided. The first switch position is the default switch position. The second switch position will activate the vehicle's engine. The switch actuator is designed to prevent accidental activation.

Hazard switch will be provided on the instrument panel or on the steering column.

Heater, defroster, and air conditioning control panel.

Turn signal arm: A self-canceling turn signal with high beam headlight controls will be provided.

Windshield wiper control will have high, low and intermittent modes.

Parking brake control: An air actuated push/pull park brake control valve will be provided.

Chassis horn control: Activation of the chassis horn control will be provided through the center of the steering wheel.

High idle engagement switch: A momentary rocker switch with integral indicator lamp will be provided. The switch will activate and deactivate the high idle function. The "OK To Engage High Idle" indicator lamp must be active for the high idle function to engage. A green indicator lamp integral to the high idle engagement switch will indicate when the high idle function is engaged.
"OK To Engage High Idle" indicator lamp: A green indicator light will be provided next to the high idle activation switch to indicate that the interlocks have been met to allow high idle engagement.

Emergency switching will be controlled by multiple individual warning light switches for various groups or areas of emergency warning lights. An Emergency Master switch provided on the instrument panel that enables or disables all individual warning light switches is included.

An additional "Emergency Master" button will be provided on the lower left hand corner of the gauge panel to allow convenient control of the "Emergency Master" system from inside the driver's door when standing on the ground.

Custom Switch Panels
The design of cab instrumentation will allow for emergency lighting and other switches to be placed within easy reach of the operator thus improving safety. There will be positions for up to four (4) switch panels in the lower instrument console and up to six (6) switch panels in the overhead visor console. All switches have backlit labels for low light 22969Bid #:
conditions.

Diagnostic Panel
A diagnostic panel will be accessible while standing on the ground and located inside the driver's side door left of the steering column. The diagnostic panel will allow diagnostic tools such as computers to connect to various vehicle systems for improved troubleshooting providing a lower cost of ownership. Diagnostic switches will allow ABS systems to provide blink codes should a problem exist.

The diagnostic panel will include the following:

Engine diagnostic port
Transmission diagnostic port
ABS diagnostic port
Roll sensor diagnostic port
Command Zone USB diagnostic port
ABS diagnostic switch (blink codes flashed on ABS telltale indicator) Diesel particulate filter regeneration switch (where applicable) Diesel particulate filter regeneration inhibit switch (where applicable) Cab LCD Display
A digital four (4)-row by 20-character dot matrix display will be integral to the gauge panel.

The display will be capable of showing simple graphical images as well as text. The display will be split into three (3) sections. Each section will have a dedicated function.

The upper left section will display the outside ambient temperature.

The upper right section will display the following, along with other configuration specific information:

Odometer
Trip mileage
PTO hours
Fuel consumption
Engine hours
The bottom section will display INFO, CAUTION, and WARNING messages. Text messages will automatically activate to describe the cause of an audible caution or warning alarm.

The LCD will be capable of displaying multiple text messages should more than one caution or warning condition exist.
0509511 Air Restriction Indicator, Imp/Vel,
AXT, Enf MUX

AIR RESTRICTION INDICATOR
A high air restriction warning indicator light LCD message with amber warning indicator and audible alarm will be provided.
0683556 Light, Do Not Move Apparatus, Wln
M2R Red LED
"DO NOT MOVE APPARATUS" INDICATOR
A Whelen, Model M2R flashing red indicator light with a chrome bezel, located in the driving compartment, will be illuminated automatically per the current NFPA requirements. The light will be labeled "Do Not Move Apparatus If Light Is On."
The same circuit that activates the Do Not Move Apparatus indicator will not activate any alarm when the parking brake is released.
0509042 Messages, Open Dr/DNMT, Color
Dsply,

DO NOT MOVE TRUCK MESSAGES
Messages will be displayed on the Command Zone™, color display located within sight of the driver whenever the Do Not Move Truck light is active. The messages will designate the item or items not in the stowed for vehicle travel position (parking brake disengaged).

The following messages will be displayed (where applicable):

Do Not Move Truck
DS Cab Door Open (Driver Side Cab Door Open)
PS Cab Door Open (Passenger's Side Cab Door Open)
DS Crew Cab Door Open (Driver Side Crew Cab Door Open)
PS Crew Cab Door Open (Passenger's Side Crew Cab Door Open) DS Body Door Open (Driver Side Body Door Open)
PS Body Door Open (Passenger's Side Body Door Open)
Rear Body Door Open
DS Ladder Rack Down (Driver Side Ladder Rack Down)
PS Ladder Rack Down (Passenger Side Ladder Rack Down)
Deck Gun Not Stowed
Lt Tower Not Stowed (Light Tower Not Stowed)
Fold Tank Not Stowed (Fold-A-Tank Not Stowed)
Aerial Not Stowed (Aerial Device Not Stowed)
Stabilizer Not Stowed
Steps Not Stowed
Handrail Not Stowed
Any other device that is opened, extended, or deployed that creates a hazard or is likely to cause major damage to the apparatus if the apparatus is moved will be displayed as a caution message after the parking brake is disengaged.
23969Bid #:
0611683 Switching, Cab Instrument Lower
Console & Overhead, Membrane,
Enforcer WiFi MUX

SWITCH PANELS
The emergency light switch panel will have a master switch for ease of use plus individual switches for selective control. Each switch panel will contain eight (8) membrane-type switches each rated for one million (1,000,000) cycles. Panels containing less than eight (8) switch assignments will include non-functioning black appliqués. The built-in switch panels will be located in the lower console or overhead console of the cab.

Additional switch panel(s) will be located in the overhead position(s) above the windshield or in designated locations on the lower instrument panel layout.

The switches will be membrane-type and also act as an integral indicator light. For quick, visual indication the entire surface of the switch will be illuminated white whenever back lighting is activated and illuminated green whenever the switch is active. An active illuminated switch will flash when interlock requirements are not met or device is actively being load managed. For ease of use, a two (2)-ply, scratch resistant laser engraved Gravoply label indicating the use of each switch will be placed in the center of the switch. The label will allow light to pass through the letters for ease of use in low light conditions.
0802940 Wiper Control, 2-Speed with
Intermittent, Saber FR/Enforcer

WIPER CONTROL
Wiper control will consist of a two (2)-speed windshield wiper control with intermittent feature and windshield washer controls. The control will be located on the left side of the center instrument panel.
0834416 USB, Cab, 4, 12V DC, Dual USB
Termination, NFPA1900/ULC

CAB USB
There will be four (4) USB terminations with a combination USB type A & C, wired to switched battery power, provided per the following:

One (1) within reach of the driver
One (1) within reach of the passenger
Two (2) on the rear of the engine tunnel, one (1) each side.

This circuit may be load managed.
0821194 Wiring, Spare, 20 A 12V DC, Batt Dir,
2nd NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power The negative wire will be connected to ground
Wires will be capable of carrying 20 amps
Power and ground will terminate upper left corner of LS3 with 6' coil Termination will be with heat shrinkable butt splicing
Wires will be protected to meet the NFPA Automotive Fire Apparatus standard Battery direct loads cannot be Load Managed
0821260 Wiring, Spare, 20 A 12V DC, 12 Ckt
Fuse Block, Blue Sea 5026 1st
NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery switched power.

The negative wire will be connected to ground.

Wires will be capable of carrying 20 amps.

Power and ground will terminate officer side dash area, leave loose with a 4' coil, .

Termination will be to a Blue Sea System, Model 5026, 12 circuit with negative bus bar, straight blade fuse block. The terminal block will include a cover with circuit labels.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

This circuit(s) may be load managed when the parking brake is set. 0821261 Wiring, Spare, 20 A 12V DC, 12
Circuit Fuse Block Blue Sea 5026
2nd NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery switched power.

The negative wire will be connected to ground.

Wires will be capable of carrying 20 amps.

Power and ground will terminate rear crew cab wall center, leave loose with a 4' coil.

Termination will be to a Blue Sea System, Model 5026, 12 circuit with negative bus bar, straight blade fuse block. The terminal block will include a cover with circuit labels.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

This circuit(s) may be load managed when the parking brake is set. 0821329 Wiring, Spare, 10 A 12V DC Batt Dir
1st NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power.

The negative wire will be connected to ground.

Wires will be capable of carrying 10 amps.

Power and ground will terminate RS1 right wall on rearward shelf track in box with adjust ability.

Termination will be with 15 amp, power point plug with rubber cover.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

Battery direct loads cannot be Load Managed
24969Bid #:
0821330 Wiring, Spare, 10 A 12V DC Batt Dir
2nd NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power.

The negative wire will be connected to ground.

Wires will be capable of carrying 10 amps.

Power and ground will terminate rear crew cab wall center, leave loose with a 4' coil.

Termination will be with heat shrinkable butt splicing.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

This circuit(s) may be load managed when the parking brake is applied. 0821331 Wiring, Spare, 10 A 12V DC Batt Dir
3rd NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power.

The negative wire will be connected to ground.

Wires will be capable of carrying 10 amps.

Power and ground will terminate RS1 right wall on rearward shelf track in box with adjust ability.

Termination will be with 15 amp, power point plug with rubber cover.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

Battery Direct loads cannot be Load Managed
0821333 Wiring, Spare, 10 A 12V DC Batt Dir
4th NFPA1900/ULC

SPARE CIRCUIT
There will be one (1) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power.

The negative wire will be connected to ground.

Wires will be capable of carrying 10 amps.

Power and ground will terminate upper left corner of RS3 with 6' coil.

Termination will be with heat shrinkable butt splicing.

Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

Battery Direct loads cannot be Load Managed
0686687 Wiring, Spare, 37.5 A 12V DC,
Customer Install Radio, 30A Sw Bat,

7.5A Ign Grnd

CUSTOMER SUPPLIED RADIO WIRING
There will be one (1) 12 volt combination wiring leads of which each will include one (1) battery switched, one (1) ignition and one (1) negative for use with radio equipment.

Each lead will be 18.00" long and be provided top center console, behind switch panels 13 and 14 for future radio install. The leads will be clearly marked in a coil and terminate with butt splices.

A breaker rated for 30 amps will be provided for circuit protection of the battery switched lead with a minimum of 10 gauge wire.

A breaker rated for 7.5 amps will be provided for circuit protection of the ignition lead.

The wires will be colored coded as follows:
red for battery switched
yellow for ignition
black for ground
0547322 Wiring, Spare, 15 A 12V DC, Switch
Feature 1st

SPARE CIRCUIT
There will be six (6) pair of wires, including a positive and a negative, installed on the apparatus.

The wires will have the following features:

The positive wire will be connected directly to the battery power.

The negative wire will be connected to ground.

Wires will be capable of carrying 15 amps.

Power and ground will terminate See IP Layout.

Termination will be with 15 amp, power point plug with rubber cover.

The circuits selected above will be controlled by a switch in the following locations:
a switch in the command switch panel
no additional switch location
Wires will be protected to meet the NFPA Automotive Fire Apparatus standard.

This circuit(s) may be load managed when the parking brake is set. 0819994 Radio, Jensen, AM/FM/WB,
Bluetooth

STEREO RADIO
There will be one heavy duty AM/FM / Weatherband / Bluetooth stereo radio. The radio will be installed within reach of the officer. There will be 5.25" speakers installed one (1) pair of 5.25" speakers in the cab and one (1) pair of 5.25" speakers in the crew cab. The antenna will be a roof-mounted rubber antenna located in an open space, on the cab roof.

The following Jensen features will be included:
180 watts max power (45W x 4); 100 watts RMS (25W x 4)
Bluetooth® streaming audio (A2DP/AVRCP)
Weatherband
AM/FM tuner with 30 presets
Audio settings (volume/bass/treble/balance/fade)
Toggle switch between day and night display
Daylight-readable, segmented LCD
Two-wire power with non-volatile memory and clock support Low battery alert
0814201 Vehicle Information Center, 7" Color
Display, Touchscreen, MUX, CL714

INFORMATION CENTER
An information center employing a 7.00" diagonal touch screen color LCD display will be encased 25969Bid #:
in an ABS plastic housing.

The information center will have the following specifications:

Operate in temperatures from -40 to 158 degrees Fahrenheit LCD optically bonded to hardened AR glass lens
Five weather resistant user interface switches
Grey with black accents
Sunlight Readable
Linux operating system
Minimum of 1000nits rated display
Display can be changed to an available foreign language A LCD display integral to the cab gauge panel will be included as outlined in the cab instrumentation area.

Programmed to read US Customary
General Screen Design
Where possible, background colors will be used to provide "At a Glance" vehicle information. If information provided on a screen is within acceptable limits, a green background will be used.

If a caution or warning situation arises the following will occur:

An amber background/text color will indicate a caution condition A red background/text color will indicate a warning condition The information center will utilize an "Alert Center" to display text messages for audible alarm tones. The text messages will be written to identify the item(s) causing the audible alarm to sound. If more than one (1) text message occurs, the messages will cycle every second until the problem(s) have been resolved. The background color for the "Alert Center" will change to indicate the severity of the "warning" message. If a warning and a caution condition occur simultaneously, the red background color will be shown for all alert center messages.

A label for each button will exist. The label will indicate the function for each active button for each screen. Buttons that are not utilized on specific screens will have a button label with no text or symbol.

Home/Transit Screen
This screen will display the following:

Vehicle Mitigation (if equipped)
Water Level (if the water level system includes compatible communications to the information center)
Foam Level (if the foam level system includes compatible communications to the information center)
Seat Belt Monitoring Screen
Tire Pressure Monitoring (if equipped)
Digital Speedometer
Active Alarms
On Scene Screen
This screen will display the following and will be auto activated with pump engaged (if equipped):

Battery Voltage
Fuel
Oil Pressure
Coolant Temperature
RPM
Water Level (if equipped)
Foam Level (if equipped)
Foam Concentration (if equipped)
Water Flow Rate (if equipped)
Water Used (if equipped)
Active Alarms
Virtual Buttons
There will be four (4) virtual switch panel screens that match the overhead and lower lighting and HVAC switch panels.

Page Screen
The page screen will display the following and allow the user to progress into other screens for further functionality:

Diagnostics
Faults
Listed by order of occurrence
Allows to sort by system
Interlock
Throttle Interlocks
Pump Interlocks (if equipped)
Aerial Interlocks (if equipped)
PTO Interlocks (if equipped)
Load Manager
A list of items to be load managed will be provided. The list will provide a description of the load.

The lower the priority numbers the earlier the device will be shed should a low voltage condition occur.

The screen will indicate if a load has been shed (disabled) or not shed. "At a glance" color features are utilized on this screen.

Systems
Command Zone
Module type and ID number
Module Version
Input or output number
Circuit number connected to that input or output
Status of the input or output
Power and Constant Current module diagnostic information Foam (if equipped)
Pressure Controller (if equipped)
Generator Frequency (if equipped)
Live Data
General Truck Data
Maintenance
Engine oil and filter
26969Bid #:

Transmission oil and filter
Pump oil (if equipped)
Foam (if equipped)
Aerial (if equipped)
Setup
Clock Setup
Date & Time
12 or 24 hour format
Set time and date
Backlight
Daytime
Night time
Sensitivity
Unit Selection
Home Screen
Virtual Button Setup
On Scene Screen Setup
Configure Video Mode
Set Video Contrast
Set Video Color
Set Video Tint
Do Not Move
The screen will indicate the approximate location and type of item that is open or is not stowed for travel. The actual status of the following devices will be indicated Driver Side Cab Door
Passenger's Side Cab Door
Driver Side Crew Cab Door
Passenger's Side Crew Cab Door
Driver Side Body Doors
Passenger's Side Body Doors
Rear Body Door(s)
Ladder Rack (if applicable)
Deck Gun (if applicable)
Light Tower (if applicable)
Hatch Door (if applicable)
Stabilizers (if applicable)
Steps (if applicable)
Notifications
View Active Alarms
Shows a list of all active alarms including date and time of the occurrence is shown with each alarm
Silence Alarms - All alarms are silenced
Timer Screen
HVAC (if equipped)
Tire Information (if equipped)
Ascendant Set Up Confirmation (if equipped)
Button functions and button labels may change with each screen. 0816633 Collision Mitigation, HAAS Alert
(R2V), HA7

COLLISION MITIGATION
There will be a HAAS Alert®, Model HA7 Responder-to-Vehicle (R2V) collision avoidance system provided on the apparatus. The HA7 cellular transponder module will be installed behind the cab windshield, as high and near to the center as practical, to allow clear visibility to the sky. The module dimensions are 5.40" long x 2.70" wide x 1.30" high, and operating temperature range is -40 degrees Celsius to 85 degrees Celsius.

The transponder will be connected to the vehicle's emergency master circuit and battery direct power and ground.

While responding with emergency lights on, the HA7 transponder sends alert messages via cellular network to motorists in the vicinity of the responding truck that are equipped with the WAZE app.

While on scene with emergency lights on, the HA7 transponder sends road hazard alerts to motorists in the vicinity of the truck that are equipped with the WAZE app.

The HA7 Responder-to-Vehicle (R2V) collision avoidance system will include the transponder and a 5 year cellular plan subscription.

Activation of the HAAS Alert system requires a representative of the customer to accept the End User License Agreement (EULA) via an on-line portal.
27969Bid #:
0606247 Vehicle Data Recorder w/CZ Display
Seat Belt Monitor

VEHICLE DATA RECORDER
There will be a vehicle data recorder (VDR) capable of reading and storing vehicle information provided.

The information stored on the VDR can be downloaded through a USB port mounted in a convenient location determined by cab model. A USB cable can be used to connect the VDR to a laptop to retrieve required information. The program to download the information from the VDR will be available to download on-line.

The vehicle data recorder will be capable of recording the following data via hardwired and/or CAN inputs:

Vehicle Speed - MPH
Acceleration - MPH/sec
Deceleration - MPH/sec
Engine Speed - RPM
Engine Throttle Position - % of Full Throttle
ABS Event - On/Off
Seat Occupied Status - Yes/No by Position
Seat Belt Buckled Status - Yes/No by Position
Master Optical Warning Device Switch - On/Off
Internal clock syncs the time and date when a laptop is connected.

Seat Belt Monitoring System
A seat belt monitoring system (SBMS) will be provided on the Command Zone™ color display.

The SBMS will be capable of monitoring up to 10 seating positions indicating the status of each seat position per the following:

Seat Occupied & Buckled = Green LED indicator illuminated Seat Occupied & Unbuckled = Red LED indicator with audible alarm No Occupant & Buckled = Red LED indicator with audible alarm No Occupant & Unbuckled = No indicator and no alarm
FAULT = Blue LED indicator illuminated
The seat belt monitoring screen will become active on the Command Zone color display when:

The home screen is active:
and there is any occupant seated but not buckled or any belt buckled with an occupant. and there are no other Do Not Move Apparatus conditions present. As soon as all Do Not Move Apparatus conditions are cleared, the SBMS will be activated.

The SBMS will include an audible alarm that will warn that an unbuckled occupant condition exists and the parking brake is released, or the transmission is not in park. 0802726 Intercom, David Clark, 5-Pos, 2-Dual
Radio, (D, O, RPTT), 3ibC, 3805

INTERCOM SYSTEM
A five (5) position intercom system with dual radio interface capability at the driver and officer positions with dual remote push to talk buttons located Per intercom layout will be provided.

Three (3) crew cab positions at three (3) forward facing seats will have radio listen / intercom only.

The following David Clark, Model U3800 components will be supplied with this system:

Two (2) U3816 Radio Interface Modules (Driver, Officer) Two (2) U3805 Radio Junction Modules
Four (4) Remote push to talk kits (2 Driver, 2 Officer) One (1) U3800 Intercom Unit (2 Crew)
One (1) C3820 Power Cable
One (1) U3801 Remote Headset Station (1 Crew)
All necessary station cables and connectors
0637058 David Clark Universal Radio
Interfaces Included with Single/Dual
System

RADIO / INTERCOM INTERFACE INCLUDED
All radio interfaced stations will have universal radio interfaces installed. The interface wiring will be routed within the cab to With Radio Equipment .
0597914 Headset, David Clark, H3442 Under
Helmet, Flex Mic

UNDER THE HELMET HEADSET
There will be four (4) under the helmet, headset(s) provided Driver, Officer, RS outboard Fwd Fcng seat, LS outboard Fwd Fcng seat.

Each David Clark, Model H3442, headset will feature:

M-7A noise canceling electret microphone
Hybrid wire/flex boom assembly, 280 rotating, for perfect microphone placement on left or right side
Dynamic earphone elements
Advanced Undercut Gel Ear Seals for superior comfort
Microphone on/off switch
6 ft. extended coil cord
Adjustable overhead support assembly
Carbon steel nape-band spring, black finish, rotates for left or right side mic positioning Independently Certified NRR: 23dB
0819255 Hangers For Headsets, NFPA/ULC
2024, Each

HEADSET HANGERS
There will be four (4) headset hanger(s) installed driver's seat, officer's seat, driver's side inboard forward facing seat and passenger's side inboard forward facing seat. The hanger(s) will meet the current edition of applicable NFPA and ULC standards for equipment mounting. 0687904 Antenna Mount, Custom Chassis,
Cable Routed to Behind Officer Seat

RADIO ANTENNA MOUNT
There will be three (3) standard 1.125", 18 thread antenna-mounting base(s) installed right side on the cab roof with high efficiency, low loss, coaxial cable(s) routed to behind the officer seat. A weatherproof cap will be installed on the mount.
28969Bid #:
0815108 Camera, Safety Vision, LS Mux, R,
Camera, SD

VEHICLE CAMERA SYSTEM
There will be a color vehicle camera system provided with the following:

One (1) camera located at the rear of the apparatus, pointing rearward, displayed automatically with the vehicle in reverse
The camera images will be displayed on the left side vehicle information center display. Audio from the microphone on the active camera will be via an amplified speaker with volume control located behind the driver seat.

The following Safety Vision components will be included:

One (1) Safety Vision, 620 camera
All necessary cables
0814831 Not Required, Camera Switcher Camera Switcher
A camera switcher is not required.
0890416 Pierce Command Zone, Advanced
Electronics & Control System,
Enforcer, WiFi CZT

ELECTRICAL POWER CONTROL SYSTEM
The primary power distribution will be located forward of the officer's seating position and be easily accessible while standing on the ground for simplified maintenance and troubleshooting.

Additional electrical distribution centers will be provided throughout the vehicle to house the vehicle's electrical power, circuit protection, and control components. The electrical distribution centers will be located strategically throughout the vehicle to minimize wire length. For ease of maintenance, all electrical distribution centers will be easily accessible. All distribution centers containing fuses, circuit breakers and/or relays will be easily accessible.

Distribution centers located throughout the vehicle will contain battery powered studs for supplying customer installed equipment thus providing a lower cost of ownership.

Circuit protection devices, which conform to SAE standards, will be utilized to protect electrical circuits. All circuit protection devices will be rated per NFPA requirements to prevent wire and component damage when subjected to extreme current overload. General protection circuit breakers will be Type-I automatic reset (continuously resetting). When required, automotive type fuses will be utilized to protect electronic equipment. Control relays and solenoid will have a direct current rating of 125 percent of the maximum current for which the circuit is protected per NFPA.

Solid-State Control System
A solid-state electronics based control system will be utilized to achieve advanced operation and control of the vehicle components. A fully computerized vehicle network will consist of electronic modules, electronic control modules to include a see through housing, a power indicator, a status indicator and circuit indicators located near their point of use to reduce harness lengths and improve reliability. The control system will comply with SAE J1939-11 recommended practices.

The control system will operate as a master-slave system whereas the main control module instructs all other system components. The system will contain patented Mission Critical software that maintains critical vehicle operations in the unlikely event of a main controller error. The system will utilize a Real Time Operating System (RTOS) fully compliant with OSEK/VDX™ specifications providing a lower cost of ownership.

For increased reliability and simplified use the control system modules will include the following attributes:

Green LED indicator light for module power
Red LED indicator light for network communication stability status Control system self test at activation and continually throughout vehicle operation No moving parts due to transistor logic
Software logic control for NFPA mandated safety interlocks and indicators Integrated electrical system load management without additional components Integrated electrical load sequencing system without additional components Customized control software to the vehicle's configuration Factory and field programmable to accommodate changes to the vehicle's operating parameters To assure long life and operation in a broad range of environmental conditions, the solid-state control system modules will meet the following specifications:

Module circuit board will meet SAE J771 specifications
Operating temperature from -40 degrees Celsius to +70 degrees Celsius Storage temperature from -40 degrees Celsius to +70 degrees Celsius Vibration to 50g
IP67 rated enclosure (Totally protected against dust and also protected against the effect of temporary immersion between 15 centimeters and one (1) meter) Operating voltage from eight (8) volts to 32 volts DC
The main controller will activate status indicators and audible alarms designed to provide warning of problems before they become critical.

Circuit Protection and Control Diagram
Copies of all job-specific, computer network input and output (I/O) connections will be provided with each chassis. The sheets will indicate the function of each module connection point, circuit protection information (where applicable), wire numbers, wire colors and load management information.

On-Board Electrical System Diagnostics
The on-board information center will include the following diagnostic information:

Text description of active warning or caution alarms
Simplified warning indicators
Amber caution indication with intermittent alarm
Red warning indication with steady tone alarm
Advanced diagnostic feature will be provided in this control system. From the Command Zone display or connected wireless device, these features allow the user to monitor the real-time status of every input or output on the vehicle. It also allows users logged in as an administrator to force on inputs or outputs to assist the troubleshooting process.

TCU Module with WiFi
An in cab module will provide WiFi wireless interface and data logging capability. The WiFi interface will comply with IEEE 802.11 b/g/n capabilities while communicating at 2.4 Gigahertz.

The module will communicate through a black WiFi antenna allowing a line of site communication range of up to 300 feet with a roof mounted antenna.

The module will transmit a password protected web page to a WiFi enabled device (i.e. most 29969Bid #:
smart phones, tablets or laptops) allowing two levels of user interaction. The firefighter level will allow vehicle monitoring of the vehicle and firefighting systems on the apparatus. The technician level will allow diagnostic access to inputs and outputs installed on the Command Zone™, control and information system.

The TCU capability will record faults from the engine, transmission, ABS and Command Zone™, control and information systems as they occur. No other data will be recorded at the time the fault occurs. The data TCU will provide up to 2 Gigabytes of data storage.

The TCU will provide a means to download the TCU information and update software in the device.

Indicator Light and Alarm Prove-Out System
A system will be provided which automatically tests basic indicator lights and alarms located on the cab instrument panel.

Voltage Monitor System
A voltage monitoring system will be provided to indicate the status of the battery system connected to the vehicle's electrical load. The system will provide visual and audible warning when the system voltage is below or above optimum levels.

The alarm will activate if the system falls below 11.8 volts DC for more than two (2) minutes.

Dedicated Radio Equipment Connection Points
There will be three (3) studs provided in the primary power distribution center located in front of the officer for two-way radio equipment. The studs will consist of the following:
12-volt 40-amp battery switched power
12-volt 60-amp ignition switched power
12-volt 60-amp direct battery power
There will also be a 12-volt 100-amp ground stud located in or adjacent to the power distribution center.

EMI/RFI Protection
To prevent erroneous signals from crosstalk contamination and interference, the electrical system will meet, at a minimum, SAE J551/2, thus reducing undesired electromagnetic and radio frequency emissions. An advanced electrical system will be used to ensure radiated and conducted electromagnetic interference (EMI) or radio frequency interference (RFI) emissions are suppressed at their source.

The apparatus will have the ability to operate in the electromagnetic environment typically found in fire ground operations to ensure clean operations. The electrical system will meet, without exceptions, electromagnetic susceptibility conforming to SAE J1113/25 Region 1, Class C EMR for 10KHz-1GHz to 100 Volts/Meter. The vehicle OEM, upon request, will provide EMC testing reports from testing conducted on an entire apparatus and will certify that the vehicle meets SAE J551/2 and SAE J1113/25 Region 1, Class C EMR for 10KHz-1GHz to 100 Volts/Meter requirements. Component and partial (incomplete) vehicle testing is not adequate as overall vehicle design can impact test results and thus is not acceptable by itself.

EMI/RFI susceptibility will be controlled by applying appropriate circuit designs and shielding. The electrical system will be designed for full compatibility with low-level control signals and high- powered two-way radio communication systems. Harness and cable routing will be given careful attention to minimize the potential for conducting and radiated EMI/RFI susceptibility. 0896456 Prognostics, Electrical System

ELECTRICAL SYSTEM PROGNOSTICS
There will be a software based vehicle tool provided to predict remaining life of the vehicles critical fluid and events.

The system will send automatic indications to the Command Zone™ information center and/or wireless enabled devices to proactively alert of upcoming service intervals.

Prognostics will include the following:

Engine oil and filter
Transmission oil and filter
0816093 ClearSky Telematics, Remote Fleet &
On-scene Management, AT&T
Commercial

TELEMATICS SYSTEM
Your vehicle will include a cellular-based vehicle telematics system including a telematic control unit with external cellular Wi-Fi and GPS antenna. Pierce will provide access to a web-based user interface portal that will allow users to access vehicle data collected as part of the system, allow users to configure monitoring tools, provide a global view of the location of each vehicle that has the system, provide a summary of fleet data, etc. The web-based user interface portal or certain features thereof may be provided on a subscription basis.

The telematic control unit will be fully integrated into the electrical system of the vehicle, will monitor the vehicle through the CAN data bus, and will transmit data through a secure AT&T 4G LTE cellular connection, and be provided with a 5 year subscription.

The web-based user interface portal will provide, among other features:

User defined interval notifications
User defined fault alerts
Remote access to Command Zone™ diagnostics
Vehicle analytics and activity monitoring
Vehicle system status
The system is activated while building your vehicle and thereafter remains active for a 60-day grace period starting when your vehicle ships from the factory. This means that the system is active at the time of factory acceptance and during the 60-day grace period. By selecting this option, it is agreed that use of the system and the web-based user interface portal will be subject to the terms set forth in the Data Systems Agreement referenced at https://www.piercemfg.com/privacy-statement
. Customers will be provided with an initial login at
the time of factory acceptance to verify performance of the system and the web-based user interface portal. The term of the subscription, if any, will begin when the vehicle ships from the factory. If customers do not log into the web-based user interface portal and confirm acceptance of the terms before the 60-day grace period ends, the system will be deactivated, and no new data will be collected or retained Pierce. Reactivation can be coordinated through the customer's authorized Pierce Dealer.
30969Bid #:
0624253 Electrical System, Enforcer MUX

ELECTRICAL
All 12-volt electrical equipment installed by the apparatus manufacturer will conform to modern automotive practices. All wiring will be high temperature crosslink type. Wiring will be run, in loom or conduit, where exposed and have grommets where wire passes through sheet metal.

Automatic reset circuit breakers will be provided which conform to SAE Standards. Wiring will be color, function and number coded. Function and number codes will be continuously imprinted on all wiring harness conductors at 2.00" intervals. Exterior exposed wire connectors will be positive locking, and environmentally sealed to withstand elements such as temperature extremes, moisture and automotive fluids.

Electrical wiring and equipment will be installed utilizing the following guidelines:

All holes made in the roof will be caulked with silicon. Large fender washers, liberally caulked, will be used when fastening equipment to the underside of the cab roof.

Any electrical component that is installed in an exposed area will be mounted in a manner that will not allow moisture to accumulate in it. Exposed area will be defined as any location outside of the cab or body.

Electrical components designed to be removed for maintenance will not be fastened with nuts and bolts. Metal screws will be used in mounting these devices. Also a coil of wire will be provided behind the appliance to allow them to be pulled away from mounting area for inspection and service work.

Corrosion preventative compound will be applied to all terminal plugs located outside of the cab or body. All non-waterproof connections will require this compound in the plug to prevent corrosion and for easy separation (of the plug).

All lights that have their sockets in a weather exposed area will have corrosion preventative compound added to the socket terminal area.

All electrical terminals in exposed areas will have silicon applied completely over the metal portion of the terminal.

All lights and reflectors, required to comply with Federal Motor Vehicle Safety Standard #108, will be furnished. Rear identification lights will be recessed mounted for protection. Lights and wiring mounted in the rear bulkheads will be protected from damage by installing a false bulkhead inside the rear compartments.

An operational test will be conducted to ensure that any equipment that is permanently attached to the electrical system is properly connected and in working order.

The results of the tests will be recorded and provided to the purchaser at time of delivery. 0079211 Batteries, (6) Stryten/Exide Grp 31,
950 CCA each, Threaded Stud

BATTERY SYSTEM
There will be six (6) 12 volt Stryten/Exide®, Model 31S950X3W, batteries that include the following features will be provided:
950 CCA, cold cranking amps
190 amp reserve capacity
High cycle
Group 31
Rating of 5700 CCA at 0 degrees Fahrenheit
1140 minutes of reserve capacity
Threaded stainless steel studs
Each battery case will be a black polypropylene material with a vertically ribbed container for increased vibration resistance. The cover will be manifold vented with a central venting location to allow a 45 degree tilt capacity.

The inside of each battery will consist of a "maintenance free" grid construction with poly wrapped separators and a flooded epoxy bottom anchoring for maximum vibration resistance. 0008621 Battery System, Single Start, All
Custom Chassis

BATTERY SYSTEM
There will be a single starting system with an ignition switch and starter button provided and located on the cab instrument panel.

MASTER BATTERY SWITCH
There will be a master battery switch provided within the cab within easy reach of the driver to activate the battery system.

An indicator light will be provided on the instrument panel to notify the driver of the status of the battery system.
0002698 Battery Compartment,
Saber/Enforcer

BATTERY COMPARTMENTS
Batteries will be placed on non-corrosive mats and be stored in well ventilated compartments located under the cab and bolted directly to the chassis frame. The battery boxes will have reinforced sides. The battery compartments will be constructed of 0.188" steel plate and be designed to accommodate a maximum of three (3) group 31 batteries in each compartment. The battery hold-downs will be of a non-corrosive material. All bolts and nuts will be stainless steel.

Heavy-duty, 2/0 gauge, color coded battery cables will be provided. Battery terminal connections will be coated with anti-corrosion compound.

Battery solenoid terminal connections will be encapsulated with semi-permanent rubberized compound.

JUMPER STUDS
One (1) set of battery jumper studs with plastic color-coded covers will be included on the battery compartments.
0816197 Charger, Sngl Sys, Kussmaul, LPC
80, 091-206-12-194C-WT-XX, 80
Amp

BATTERY CHARGER
There will be a Kussmaul, Model LPC 80, part number 091-206-12-194C-WT-XX, 80 amp 12 volt DC battery charger with part number 091-194-provided.

There will be a, Model 091-194X-IND-WT-XX, display indicating the state of charge provided. The color of the outside trim of this display will be red.

The battery charger will be wired to the AC shoreline inlet through a splice box. 31969Bid #:
0814869 Location, Cab, Charger, Behind
Driver Seat
The battery charger will be located in the cab behind the driver seat. 0813919 Panel, Charger Display, Kussmaul,
Included w/ Charger

REMOTE CONTROL PANEL - BATTERY CHARGER
There will be a Kussmaul™, charger display included.
0814939 Location, Cab, Ind/Remote, Driver's
Seat Riser
The battery charger indicator will be located on the driver's seat riser. 0811952 Not Required, Indicator/Remote
Status
0824337 Not Required, Location Ind/Remote
0016857 Shoreline, 20A 120V, Kussmaul Auto
Eject, 091-55-20-120, Super

AUTO EJECT FOR SHORELINE
There will be one (1) Kussmaul™, Model 091-55-20-120, 20 amp 120 volt AC shoreline inlet(s) provided to operate the dedicated 120 volt AC circuits on the apparatus.

The shoreline inlet(s) will include red weatherproof flip up cover(s).

There will be a release solenoid wired to the vehicle's starter to eject the AC connector when the engine is starting.

The shoreline(s) will be connected to the battery charger.

There will be a mating connector body supplied with the loose equipment.

There will be a label installed near the inlet(s) that state the following:

Line Voltage
Current Ratting (amps)
Phase
Frequency
0026800 Shoreline Location The shoreline receptacle will be located on the driver side of cab, to the front of cab door. 0813265 Display, Kussmaul Single Bat Status
Ind 091-94-12, Wired to Batteries,
Comm/PMFD

BATTERY CHARGE INDICATOR
There will be a Kussmaul, Model 091-94-12, battery charge indicator installed on the driver's seat riser.
0642936 Timer, Havis Chargeguard Select
CG-X
12 VOLT AUTO SHUT OFF TIMER
There will be a Havis, Model CG-X Chargeguard, automatic 12Vdc shut off timer located inside the officer side MUX access door in best possible location to protect 20A fuse block near the officer side dash .

The timer will provide 18Vdc high and 11Vdc low voltage disconnect and an adjustable shut down delay timer with a load current rating of 30 amps.
0121711 Alternator, 320 amp, Leece-Neville
4962PA, Sgl Sys

ALTERNATOR
A Leece-Neville, Model 4962PA, alternator will be provided. It will have a rated output current of 320 amps, as measured by SAE method J56. The alternator will feature an integral, self diagnostic regulator and rectifier. The alternator will be connected to the power and ground distribution system with heavy-duty cables sized to carry the full rated alternator output. 32969Bid #:
0092582 Load Manager/Sequencer, MUX

ELECTRONIC LOAD MANAGER
An electronic load management (ELM) system will be provided that monitors the vehicles 12-volt electrical system, automatically reducing the electrical load in the event of a low voltage condition, and automatically restoring the shed electrical loads when a low voltage condition expires. This ensures the integrity of the electrical system.

For improved reliability and ease of use, the load manager system will be an integral part of the vehicle's solid state control system requiring no additional components to perform load management tasks. Load management systems which require additional components will not be allowed.

The system will include the following features:

System voltage monitoring.

A shed load will remain inactive for a minimum of five minutes to prevent the load from cycling on and off.

Sixteen available electronic load shedding levels.

Priority levels can be set for individual outputs.

High Idle to activate before any electric loads are shed and deactivate with the service brake.

If enabled:
"Load Man Hi-Idle On" will display on the information center.

Hi-Idle will not activate until 30 seconds after engine start up.

Individual switch "on" indicator to flash when the particular load has been shed.

The information center indicates system voltage.

The information center, where applicable, includes a "Load Manager" screen indicating the following:

Load managed items list, with priority levels and item condition.

Individual load managed item condition:

ON = not shed
SHED = shed

SEQUENCER
A sequencer will be provided that automatically activates and deactivates vehicle loads in a preset sequence thereby protecting the alternator from power surges. This sequencer operation will allow a gradual increase or decrease in alternator output, rather than loading or dumping the entire 12 volt load to prolong the life of the alternator.

For improved reliability and ease of use, the load sequencing system will be an integral part of the vehicle's solid state control system requiring no additional components to perform load sequencing tasks. Load sequencing systems which require additional components will not be allowed.

Emergency light sequencing will operate in conjunction with the emergency master light switch.

When the emergency master switch is activated, the emergency lights will be activated one by one at half-second intervals. Sequenced emergency light switch indicators will flash while waiting for activation.

When the emergency master switch is deactivated, the sequencer will deactivate the warning light loads in the reverse order.

Sequencing of the following items will also occur, in conjunction with the ignition switch, at half- second intervals:

Cab Heater and Air Conditioning
Crew Cab Heater (if applicable)
Crew Cab Air Conditioning (if applicable)
Exhaust Fans (if applicable)
Third Evaporator (if applicable)
0783153 Headlights, Rect LED, JW Spkr Evo
2, AXT/Enf/Imp/Sab/Vel

HEADLIGHTS
There will be four (4) JW Speaker®, Model 8800, 4" x 6" rectangular LED lights mounted in the front quad style, chrome housing on each side of the cab grille:
the outside light on each side will contain a part number 055***1 low beam module the inside light on each side will contain a part number 055***1 high beam module the headlights to include chrome bezels
The low beam lights will be activated when the headlight switch is on.

The high beam and low beam lights will be activated when the headlight switch and the high beam switch is activated.
0625953 Light, Directional, Wln 600 Cmb, Cab
Crn, Wrp Bzl Out HD Lts, Enf/Sab

DIRECTIONAL LIGHTS
There will be two (2) Whelen 600 series, LED combination directional/marker lights provided. The lights will be located on the outside cab corners, next to the headlights.

The color of the lenses will be clear.
0805325 Light, Directional, Wln M62T* LED,
15 Degree Angle Bracket, Additional

ADDITIONAL DIRECTIONAL LIGHT
There will be two (2) Whelen®, Model M62T*, amber LED directional lights provided Rear of crew cab. The lens color(s) to be the same as the LEDs.

Each light will be surface mounted in a 15 degree angled bracket with chrome housing.

The flash pattern of the directional lights will be Steady On (Arrow). 0620054 Light, Directional/Marker,
Intermediate, Weldon 9186-8580-29
LED 2lts

INTERMEDIATE LIGHT
There will be two (2) Weldon, Model 9186-8580-29, amber LED turn signal marker lights furnished, one (1) each side, in the rear fender panel. The light will double as a turn signal and marker light.
33969Bid #:
0647802 Lights, Clearance/Marker/ID, Front,
P25 LED 5 Lts, Saber FR/Enforcer

CAB CLEARANCE/MARKER/ID LIGHTS
There will be five (5) amber LED lights provided to indicate the presence and overall width of the vehicle in the following locations:

Three (3) amber LED identification lights will be installed in the center of the cab above the windshield.

Two (2) amber LED clearance lights will be installed, one (1) on each outboard side of the cab above the windshield.
0625210 Lights, Directional, Cab Front Side,
Truck-Lite 19036Y LED, AXT/Enf

FRONT CAB SIDE DIRECTIONAL LIGHTS
There will be two (2) Truck-Lite®, Model 19036Y, amber LED lights installed to the outside of the chrome wrap around bezel, one (1) on each side of the cab.

The lights will activate as additional directional lights with the corresponding directional circuit. 0563675 Lights, Clearance/Marker/ID, Rear,
Truck-Lite 33050R LED 7Lts

REAR CLEARANCE/MARKER/ID LIGHTING
There will be three (3) Truck-Lite®, Model 33050R, LED lights used as identification lights recessed and located at the rear of the apparatus per the following:

As close as practical to the vertical centerline
Centers spaced not less than 6.00" or more than 12.00" apart Red in color
All at the same height
There will be two (2) Truck-Lite, Model 33050R, LED lights recessed at the rear of the apparatus used as clearance lights located at the rear of the apparatus per the following:

To indicate the overall width of the vehicle
One (1) each side of the vertical centerline
As near the top as practical
Red in color
To be visible from the rear
All at the same height
There will be two (2) Truck-Lite, Model 33050R, LED lights recessed on the side of the apparatus as marker lights as close to the rear as practical per the following:

To indicate the overall length of the vehicle
One (1) each side of the vertical centerline
As near the top as practical
Red in color
To be visible from the side
All at the same height
There will be two (2) red reflectors located on the rear of the truck facing to the rear. One (1) each side, as far to the outside as practical, at a minimum of 15.00", but no more than 60.00", above the ground.

There will be two (2) red reflectors located on the side of the truck facing to the side. One (1) each side, as far to the rear as practical, at a minimum of 15.00", but no more than 60.00", above the ground.

Per FMVSS 108 and CMVSS 108 requirements.
0804514 Lights, Tail, Wln M62BTT* Red
Stop/Tail & M62T* Amber Dir Arw For
Hsg

REAR FMVSS LIGHTING
The rear stop/tail and directional lighting included in the rear tail light housing will include the following:

Two (2) Whelen®, Model M62BTT, 4.30" high x 6.70" wide x 1.40" deep brake/tail lights with red LEDs
Two (2) Whelen, Model M62T, 4.30" high x 6.70" wide x 1.40" deep directional lights with amber LEDs. The directional lights will be set to Steady On (Arrow) flash pattern.

The lens color(s) to be the same as the LEDs.
0806466 Lights, Backup, Wln M62BU, LED,
For Tail Lt Housing
There will be two (2) Whelen Model M62BU, LED backup lights provided in the tail light housing. 0889571 Bracket, License Plate & Light, P25
LED, Stainless Brkt, Loc

LICENSE PLATE BRACKET
One (1) license plate bracket constructed of stainless steel will be provided and located LS rear.

Above electric hosebed door switches (see signed AD drawing).

One (1) white LED light with chrome housing will be provided to illuminate the license plate. A stainless steel light shield will be provided over the light that will direct illumination downward, preventing white light to the rear.
0556842 Bezels, Wln, (2) M6 Chrome Pierce,
For mtg (4) Wln M6 lights

LIGHTING BEZEL
There will be two (2) Whelen, Model M6FCV4P, four (4) place chromed ABS housings with Pierce logos provided for the rear M6 series stop/tail, directional, back up, scene lights or warning lights. 0589905 Alarm, Back-up Warning, PRECO
1040

BACK-UP ALARM
A PRECO, Model 1040, solid-state electronic audible back-up alarm that actuates when the truck is shifted into reverse will be provided. The device will sound at 60 pulses per minute and automatically adjust its volume to maintain a minimum ten (10) dBA above surrounding environmental noise levels.
34969Bid #:
0564535 Light, Marker, Britax Rubber Arm,
Model L427.203.L12 LED, Red/Amb,
Qty/Loc

MARKER LIGHTS
There will be one (1) pair of amber and red, Britax, Model L427.203.L12, LED marker lights with rubber arm, located at the very rear of the body (duplicate location from previous job 35932. The amber lens will face the front and the red lens will face the rear of the truck and be the most rearward marker light.

These lights will be activated with the running lights of the vehicle. 0626588 Lights, Perimeter Cab, TecNiq T10-
LC00-1 15" LED 4Dr

CAB PERIMETER SCENE LIGHTS
There will be four (4) TecNiq, Model T10-LC00-1, 15.00" lights with white LEDs and 45 degree stainless steel brackets provided per the following:
one (1) under the driver's side cab access step
one (1) under the passenger's side cab access step
one (1) under the passenger's side crew cab access step one (1) under the driver's side crew cab access step
The lights will be activated when the battery switch is on, when the respective door is open and by the same control selected for the body perimeter lights. 0617901 Lights, Perimeter Pump House,
TecNiq T10-LC00-1 15" LED 2lts

PUMP HOUSE PERIMETER LIGHTS
There will be two (2) TecNiq, Model T10-LC00-1, 15.00" white 12 volt DC LED weatherproof strip lights provided under the pump panel running boards, one (1) each side.

The lights will be controlled by the same means as the body perimeter lights. 0626579 Lights, Perimeter Body, TecNiq T10-
LC00-1 15" LED 2lts, Rear Step

BODY PERIMETER SCENE LIGHTS
There will be two (2) TecNiq, Model T10-LC00-1, 15.00" 12 volt DC LED strip lights provided at the rear step area of the body, one (1) each side shining to the rear.

The perimeter scene lights will be activated when a switch within reach of the driver is activated and the parking brake is applied.
0896454 Enhanced Software for Perimeter Lts

ENHANCED SOFTWARE FOR PERIMETER LIGHTS
All perimeter lights will be deactivated when the parking brake is released unless alternate control is selected.

The cab and crew cab perimeter lights will remain on for ten (10) seconds for improved visibility after the doors closed.
0556360 Lights, Step, P25 LED 4lts, Pump Pnl
Sw

STEP LIGHTS
Four (4) white LED step lights will be provided. One (1) step light will be provided on each side, on the front compartment face and two (2) step lights at the rear to illuminate the tailboard.

These step lights will be actuated with the pump panel light switch.

All steps on the apparatus will be illuminated per the current edition of applicable NFPA standards.
0776357 Light, Visor, Wln, 12V P*H2* Pioneer,
Cnt Feature, 1st
12 VOLT LIGHTING
There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC light(s) with a combination of flood and spot optics provided on the front visor, centered.

The housing(s) painted parts of this light assembly to be black.

The light(s) will be controlled by a switch at the driver's side switch panel and by a switch at the passenger's side switch panel.

These light(s) may be load managed when the parking brake is applied. 0774308 Lights, Wln, P*H2* Pioneer, 12 VDC,
2nd
12 VOLT DC SCENE LIGHTS
There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC powered lights with white LEDs and a combination of flood and spot optics installed on the apparatus located, P/S rear outer crew cab wall (Match Job 35932).

The light(s) to be installed on push up side mount outside pole length to be 20.00" long with a handle holder and sensor connecting the pole to the Do Not Move Truck Indicator circuit.

The painted parts of this light assembly to be black.

The lights will be activated by a switch at the left side pump panel and by a switch at the right side pump panel.

The light(s) may be load managed when the parking brake is applied. 0774309 Lights, Wln, P*H2* Pioneer, 12 VDC,
1st
12 VOLT DC SCENE LIGHTS
There will be one (1) Whelen® Model P*H2*, 17,750 lumens 12 volt DC powered lights with white LEDs and a combination of flood and spot optics installed on the apparatus located, D/S rear outer crew cab wall (Match Job 35932).

The light(s) to be installed on push up side mount outside pole length to be 20.00" long with a handle holder and sensor connecting the pole to the Do Not Move Truck Indicator circuit.

The painted parts of this light assembly to be black.

The lights will be activated by a switch at the left side pump panel and by a switch at the right side pump panel.

The light(s) may be load managed when the parking brake is applied. 35969Bid #:
0774948 Lights, Wln, P*H1* Pioneer, 12 VDC,
2nd
12 VOLT DC SCENE LIGHTS
There will be one (1) Whelen® Model P*H1*, 8,875 lumens 12 volt DC powered lights with white LEDs and flood optics installed on the apparatus located, P/S crew cab upper (Match Job 35932).

The light(s) to be installed in a 15 degree vertical recessed bracket.

The painted parts of this light assembly to be black.

The lights will be activated by a switch at the driver's side switch panel, by a switch at the left side pump panel and by a switch at the passenger's side switch panel.

The light(s) may be load managed when the parking brake is applied. 0775524 Lights, Wln, P*H1* Pioneer, 12 VDC,
1st
12 VOLT DC SCENE LIGHTS
There will be one (1) Whelen® Model P*H1*, 8,875 lumens 12 volt DC powered lights with white LEDs and flood optics installed on the apparatus located, driver side, upper crew cab (Match Job 35932).

The light(s) to be installed in a 15 degree vertical recessed bracket.

The painted parts of this light assembly to be black.

The lights will be activated by a switch at the driver's side switch panel, by a switch at the left side pump panel and by a switch at the passenger's side switch panel.

The light(s) may be load managed when the parking brake is applied. 0774336 Lights, Wln, P*H1* Pioneer, 12 VDC,
1st
12 VOLT LIGHTING
There will be two (2) Whelen® Model P*H1*, 8,875 lumens 12 volt DC LED light(s) with flood optics installed on the apparatus located, upper rear bulkheads, one each side (Match Job 35932).

The painted parts of this light assembly to be black.

The light(s) to be installed in a 15 degree vertical recessed bracket.

The lights will be controlled by a switch at the driver's side switch panel, by a switch at the left side pump panel, by a switch at the passenger's side switch panel and by a switch in a stainless steel cup located on the passenger's side at the rear of the apparatus no more than 72.00" from the ground.

The light(s) may be load managed when the parking brake is applied. 0645878 Lights, Hose Bed, Cover, Dual Amdor
AY-9750-20 LED Light Strips 4lts,
Low

HOSE BED LIGHTS
There will be Amdor LumaBar H2O, Model AY-9750-20, 20.00" white 12 volt DC LED light strips provided to illuminate the hose bed area.

Two (2) LED light strips will be installed on the driver's side hose bed cover 30.00" from the front and rear of the hose bed, as close to the hinge as practical.

Two (2) LED light strips will be installed on the passenger's side hose bed cover 30.00" from the front and rear of the hose bed, as close to the hinge as practical.

The lights will be activated when the hosebed cover is raised. 0645677 Lights, Not Required, Rear Work, Alt.
12 Volt Lights At Rear Body
0709438 Lights, Walk Surf, FRP Flood, LED

WALKING SURFACE LIGHT
There will be Model FRP, 4.00" round black 12 volt DC LED floodlight(s) with bolt mount provided to illuminate the entire designated walking surface on top of the body.

The light(s) will be activated when the body step lights are on. 0060111 Pumper, Medium, Galvanneal, 2nd
Gen
0554271 Body Skirt Height, 20"

36969Bid #:
0028244 Tank, Water, 500 Gallon, Poly, Med

WATER TANK
Booster tank will have a capacity of 500 gallons and be constructed of polypropylene plastic by United Plastic Fabricating, Incorporated.

Tank joints and seams will be nitrogen welded inside and out.

Tank will be baffled in accordance with the current edition of applicable NFPA standards.

Baffles will have vent openings at both the top and bottom to permit movement of air and water between compartments.

Longitudinal partitions will be constructed of 0.38" polypropylene plastic and will extend from the bottom of the tank through the top cover to allow for positive welding.

Transverse partitions will extend from 4.00" off the bottom of the tank to the underside of the top cover.

All partitions will interlock and will be welded to the tank bottom and sides.

Tank top will be constructed of 0.50" polypropylene. It will be recessed 0.38" and will be welded to the tank sides and the longitudinal partitions.

Tank top will be sufficiently supported to keep it rigid during fast filling conditions.

Construction will include 2.00" polypropylene dowels spaced no more than 30.00" apart and welded to the transverse partitions. Two (2) of the dowels will be drilled and tapped (0.50" diameter, 13.00" deep) to accommodate lifting eyes.

A sump that will be sized dependent on the tank to pump plumbing will be provided at the bottom of the water tank.

Sump will include a drain plug and the tank outlet.

Tank will be installed in a fabricated cradle assembly constructed of structural steel.

Sufficient crossmembers will be provided to properly support bottom of tank. Crossmembers will be constructed of steel bar channel or rectangular tubing.

Tank will "float" in cradle to avoid torsional stress caused by chassis frame flexing. Rubber cushions, 0.50" thick x 3.00" wide, will be placed on all horizontal surfaces that the tank rests on.

Stops or other provision will be provided to prevent an empty tank from bouncing excessively while moving vehicle.

Mounting system will be approved by the tank manufacturer. 0003405 Overflow, 4.00" Water Tank, Poly Fill tower will be constructed of 0.50" polypropylene and will be a minimum of 8.00" wide x 14.00" long.

Fill tower will be furnished with a 0.25" thick polypropylene screen and a hinged cover.

An overflow pipe, constructed of 4.00" schedule 40 polypropylene, will be installed approximately halfway down the fill tower and extend through the water tank and exit to the rear of the rear axle. 0028104 Foam Cell Required
0023412 Drain, Tank - 1.50" TANK DRAIN
A 1.50" tank drain will be installed with a 1.50" ball valve located underneath the left front compartment and properly labeled.
0084432 Modified Poly Tank, Ext'd Over Rear
Compt
The water tank will be extended to the rear of the truck, over the rear compartment. 0633066 Sleeve, Through Tank SLEEVE PLUMBING THROUGH TANK Two (2) sleeves will be provided in the water tank for a 3.00" pipe to the rear. 0553729 Not Required, Restraint, Water Tank,
Heavy Duty
0003429 Not Required, Direct Tank Fill

0003424 Not Required, Dump Valve

0048710 Not Required, Jet Assist

0030007 Not Required, Dump Valve Chute

0514778 Not Required, Switch, Tank Dump
Master
37969Bid #:
0126632 Hose Bed, Galv, Pumper HOSE BED
The hose bed will be fabricated of 12-gauge galvanneal steel.

The sides will not form any portion of the fender compartments.

Upper and rear edges of side panels will have a double break for rigidity, a split tube finish will not be acceptable.

The upper area at the rear of the hose bed will be covered with brushed stainless steel to prevent damage to painted surface when hose is removed.

Flooring of the hose bed will be removable aluminum grating with the top surface corrugated to aid in hose aeration. The grating slats will be a minimum of 0.50" x 4.50" with spacing between slats for hose ventilation.
0723549 Painted Hose Bed The hose bed interior walls will be painted to match the lower body color. 0003481 Hose Bed Capacity, Special Hose bed will accommodate From DS to PS: 800' Bulldog 5", 200' Key Tru-Id 2.5", 400' Key Cobra Combat 1.75", 200' Key Tru-Id 2.5" and 400' Key 3". 0083488 Divider, Hose Bed, .25" Unpainted

HOSE BED DIVIDER
Three (3) hosebed dividers will be furnished for separating hose.

Each divider will be constructed of a 0.25" brushed aluminum sheet. Flat surfaces will be sanded for uniform appearance or constructed of brushed aluminum.

Divider will be fully adjustable by sliding in tracks, located at the front and rear of the hose bed.

Divider will be held in place by tightening bolts, at each end.

Acorn nuts will be installed on all bolts in the hose bed which have exposed threads. 0821844 Cover, Hose Bed, Alum Treadplate,
Bolted T-Bar, Electric Actuated

HOSE BED COVER ELECTRIC ACTUATOR
A two (2) section hose bed cover, constructed of .125" bright aluminum treadplate will be furnished. The cover will be hinged with full length stainless steel piano hinge. The sides will be slanted down with the center of the cover supported by a modular stationary bridgework support.

The covers will not over lap.

The cover will be reinforced so that it can support the weight of a man walking on the cover.

A pneumatic gas spring assist will be installed at the front of the covers to help support and stabilize the cover throughout its range of motion.

If access to water tank fill tower is blocked by the hose bed cover, then a hinged door will be provided in it so that tank may be filled without raising cover doors.

Chrome grab handles and two (2) (one (1) each side) electric linear actuator with brake cylinders will be provided to assist in opening and closing the cover. A rubber-covered momentary toggle switch will be provided for each actuator that controls the opening and closing of the covers. Each switch will be located at the rear body of the body at the left side. Additional locks on top of the cover are not required to secure the cover in the nested position.

A cross divider will be provided directly behind the actuators, at the front of the hose bed, to support the actuators and provide a clean appearance.

A handrail will be provided at the rear, in the center of the support, to assist in climbing up the back of the truck.

The hose bed cover will be connected to the Do Not Move Truck indicator. The light will be activated if the cover is not in the stowed position and the parking brake is released. 0807353 Hose Restraint, Hose Bed, Vinyl,
Rear, Separate From Top, Split 2-Sec

HOSE RESTRAINT REAR
At the rear of the hose bed, a black vinyl flap will be provided. The vinyl flap will be split into two sections at the center. The vinyl flap will be provided with hook and loop between each section.

The top of the vinyl flap will be attached to the top of the hosebed with quarter turn. At the bottom of the flap, hinged style seat belt buckle will be provided. The bottom of the flap will be chain weighted.
0010133 Cross-Divider, Hose Bed

A cross-divider will be provided just behind the fill tower.  The divider will be bolted to the side sheet.
0581892 Divider, .25", Unpainted, Permanent ADDITIONAL HOSE BED DIVIDER There will be one (1) additional hose bed dividers furnished.

Each divider will be constructed of a 0.25" brushed aluminum sheet.

Partition will be permanently installed and located on the inboard top edge of the ladder storage box.

Acorn nuts will be installed on all bolts in the hose bed which have exposed threads.

Flat surfaces will be sanded for uniform appearance or constructed of brushed aluminum. 0817279 Extension, Over Pre-Connect,
Webbing or Vinyl, Rear Hose Bed
Cover
A quantity of one (1) extension(s) in the webbing or vinyl hosebed cover at the rear of the hose bed will be provided to allow for coverage of pre-connects. The extension(s) provided will be Vinyl 4" Longer than StandardThis will be for the right side of the split hose cover. 38969Bid #:
0013512 Running Boards, 12.75" Deep

RUNNING BOARDS
Running boards will be fabricated of 0.125" bright aluminum treadplate.

Each running board will be supported by a welded 2.00" square tubing and channel assembly, which will be bolted to the pump compartment substructure.

Running boards will be 12.75" deep and spaced 0.50" away from the pump panel.

A splash guard will be provided above the running board treadplate. 0689621 Tailboard, 16" Deep TAILBOARD
The tailboard will also be constructed of .125" bright aluminum treadplate and spaced .50" from the body, as well as supported by a structural steel assembly.

The tailboard area will be 16.00" deep.

The exterior side will be flanged down and in for increased rigidity of tailboard structure. 0831801 SP Wall, Rear, Body Material, Aluminum
Treadplate Center, 16" Inset

REAR WALL, BODY MATERIAL/TREADPLATE CENTER
The rear facing surfaces of the center rear wall will be aluminum treadplate.

The bulkheads, the surface to the rear of the side body compartments, will be smooth and the same material as the body.

The center rear wall will be inset 16" from the body bulkhead rear walls.

Any inboard facing surfaces below the height of the hosebed will be aluminum diamondplate. 0889214 Tow Eyes, w/Tow Bar, 2G Pumper

REAR TOW EYES
Two (2) tow eyes, which are an integral part of the body mounting substructure, will be installed below the rear of the truck.

The tow eyes will be of adequate strength to allow the truck to be pulled from the eyes.

REAR TOW BAR
One (1) tow bar will be installed under the tailboard.

The tow bar assembly will be designed and positioned to allow up to a 30-degree upward angled pull of 17,000 lb, or a 20,000 lb straight horizontal pull in line with the centerline of the vehicle.

The tow bar design will have been tested and evaluated using finite element analysis techniques. 0590934 Hose Restraint, Running Board,
Straps, FV Fastener

RUNNING BOARD HOSE RESTRAINT
A pair of 2.00" wide black nylon straps with 2.00" side release fasteners will be provided for each hose tray to secure the hose during travel. There will be Two (2) hose trays located one (1) in each side running board.
0014112 Tray, Hose, Running Board, Special
Capacity, Predefined

HOSE TRAY
Two (2) hose trays will be recessed one (1) in each side running board.

Capacity of the tray will be 25' of 5.00" hose.

Rubber matting will be installed on the floor of the tray to provide proper ventilation. Drain holes will be provided.
39969Bid #:
0895816 Construction, Compt, Galv, 2G
Pumper

COMPARTMENTATION
Body and compartments will be fabricated of galvanneal steel.

Side compartments will be an integral assembly with the rear fenders.

Circular fender liners will be provided for prevention of rust pockets and ease of maintenance.

Side compartment flooring will be 12-gauge and of the sweep out design, with the floor higher than the compartment door lip.

The side compartment door opening will be framed by flanging the edges in 1.75" and bending out again 0.75" to form an angle.

Drip protection will be provided above the doors by means of bright aluminum extrusion, formed bright aluminum treadplate, or polished stainless steel.

The top of the compartment will be covered with bright aluminum treadplate rolled over the edges on the front, rear, and outward side. These covers will have the corners TIG welded.

Side compartment covers will be separate from the compartment tops.

Front facing compartment walls will be covered with bright aluminum treadplate.

All screws and bolts which protrude into a compartment will have acorn nuts on the ends to prevent injury.

UNDERBODY SUPPORT SYSTEM
Due to the severe loading requirements of this pumper, a method of body and compartment support suitable for the intended load will be provided.

The backbone of the support system will be the chassis frame rails, which is the strongest component of the chassis and designed for sustaining maximum loads.

The support system will include 0.375" thick steel vertical angle supports bolted to the chassis frame rails with 0.625" diameter bolts.

Attached to the bottom of the steel vertical angles will be horizontal angles, with gussets welded to the vertical members, which extend to the outside edge of the body.

A steel frame will be mounted on the top of these supports to create a floating substructure, which results in a 500 lb equipment support rating per lower compartment.

The steel frames as well as the steel vertical angles will be treated with an epoxy E-coat or equivalent to provide resistance to corrosion and chemicals as standard.

The floating substructure will be separated from the horizontal members with neoprene elastomer isolators. These isolators will reduce the natural flex stress of the chassis from being transmitted to the body.

The isolators will have a broad load range, proven viability in vehicular applications, be of a fail safe design and allow for all necessary movement in three (3) transitional and rotational modes.

The neoprene isolators will be installed in a modified V three (3)-point mounting pattern to reduce the natural flex of the chassis being transmitted to the body.

A design with body compartments hanging on the chassis, unsupported, will not be acceptable.

AGGRESSIVE WALKING SURFACE
All exterior surfaces designated as stepping, standing, and walking areas will comply with the required average slip resistance of the current NFPA standards.

LOUVERS
Louvers will be stamped into compartment walls to provide the proper airflow inside the body compartments and to prevent water from dripping into the compartment. Where these louvers are provided, they will be formed into the metal and not added to the compartment as a separate plate.

TESTING OF BODY DESIGN
Body structural analysis will be fully tested. Proven engineering and test techniques such as finite element analysis, strain gauging, and model analysis will be performed with special attention given to fatigue, life and structural integrity of the cab, body and substructure.

The body will be tested while loaded to its greatest in-service weight.

The criteria used during the testing procedure will include:

Raising opposite corners of the vehicle tires 9.00", simulating the twisting a truck may experience when driving over a curb.

Making a 90 degree turn while at 20 mph, simulating aggressive driving conditions.

Driving the vehicle at 35 mph on a washboard road.

Driving the vehicle at 55 mph on a smooth road.

Accelerating the vehicle fully, until reaching the approximate speed of 45 mph, on rough pavement.

Evidence of actual testing techniques will be made available upon request. 0023650 LS 152" Rollup, Full Height Compts,
FDLER

LEFT SIDE COMPARTMENTATION
The left side compartmentation will consist of three rollup door compartments.

A full height, rollup door compartment ahead of the rear wheels will be provided. The interior dimensions of this compartment will be 34.50" wide x 66.63" high x 25.88" deep in the lower

25.00" of the compartment and 12.00" deep in the remaining upper portion. The clear door opening will be a minimum of 28.75" wide x 56.88" high.

A rollup door compartment over the rear wheels will be provided. The interior dimensions of this compartment will be 66.50" wide x 32.88" high x 12.00" deep. The clear door opening will be a minimum of 58.25" wide x 23.13" high.

A full height, rollup door compartment behind the rear wheels will be provided.The interior dimensions of this compartment will be 47.75" wide x 67.63" high x 25.88" deep in the lower 26.00" of height and 12.00" deep in the remaining upper section of the compartment.

The clear door opening will be a minimum of 44.75" wide x 57.88" high.

The interior height of the compartments will be measured from the compartment floor to the ceiling. The spool of the rollup door at the top of the compartment takes up some usable space. The depth of the compartments will be measured from the back wall to the inside of the door frame.

Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand.
40969Bid #:
0063658 RS 152" Rollup, Full Height Compts,
FDLER

RIGHT SIDE COMPARTMENTATION
The right side compartmentation will consist of three rollup door compartments.

A full height, rollup door compartment ahead of the rear wheels will be provided. The interior dimensions of this compartment will be 34.50" wide x 66.63" high x 25.88" deep in the lower

25.00" of the compartment and 12.00" deep in the remaining upper portion. The clear door opening will be a minimum of 28.75" wide x 56.88" high.

A rollup door compartment over the rear wheels will be provided. The interior dimensions of this compartment will be 66.50" wide x 32.88" high x 12.00" deep. The clear door opening will be a minimum of 58.25" wide x 23.13" high.

A full height, rollup door compartment behind the rear wheels will be provided.The interior dimensions of this compartment will be 47.75" wide x 67.63" high x 25.88" deep in the lower 26.00" of height and 12.00" deep in the remaining upper section of the compartment.

The clear door opening will be a minimum of 44.75" wide x 57.88" high.

The interior height of the compartments will be measured from the compartment floor to the ceiling. The spool of the rollup door at the top of the compartment takes up some usable space. The depth of the compartments will be measured from the back wall to the inside of the door frame.

Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand.
0594005 Doors, Rollup, Amdor, Side
Compartments

SIDE COMPARTMENT ROLLUP DOOR(S)
There will be six (6) compartment doors installed on the side compartments, double faced, aluminum construction, painted one (1) color to match the lower portion of the body and manufactured by AMDOR™ brand rollup doors.

Door(s) will be constructed using 1.00" extruded double wall aluminum slats which will feature a flat smooth interior surface to provide maximum protection against equipment hang-up. The slats will be connected with a structural driven ball and socket hinge designed to provide maximum curtain diaphragm strength. Mounting and adjusting the curtain will be done with a clip system that connects the curtain to the balancer drum allowing for easy tension adjustment without tools.

The slats will be mounted in reusable slat shoes with positive snap-lock securement.

Each slat will incorporate weather tight recessed dual durometer seals. One (1) fin will be designed to locate the seal within the extrusion. The second will serve as a wiping seal which will also allow for compression to prevent water ingression.

The doors will be mounted in a one (1)-piece aluminum side frame with recessed side seals to minimize seal damage during equipment deployment. All seals including side frames, top gutters and bottom panel are to be manufactured utilizing non-marring materials.

Bottom panel flange of rollup door will be equipped with two (2) cut-outs to allow for easier access with gloved hands.

A polished stainless steel lift bar with locking key latches to be provided for each roll-up door. The keys to be Model 751 to match all compartment and cab doors. The lift bar will be located at the bottom of door with striker latches installed at the base of the side frames. Side frame mounted door strikers will include support beneath the stainless steel lift bar to prevent door curtain bounce, improve bottom seal life expectancy and to avoid false door ajar signals.

All injection molded rollup door wear components will be constructed of Type 6 nylon.

Each rollup door will have a 3.00 inch diameter balancer/tensioner drum to assist in lifting the door.

The header for the rollup door assembly will not exceed 4.00".

A heavy-duty magnetic switch will be used for control of open compartment door warning lights. 0013671 Rear, Rollup, 30.75" F-F, 25.88" D REAR COMPARTMENTATION A roll-up door compartment above the rear tailboard will be provided.

The interior dimensions of this compartment will be 40.00" wide x 33.63" high x 25.88" deep. The spool of the rollup door at the top of the compartment takes up some usable space. The depth of the compartment will be calculated with the compartment door closed.

A louvered, removable access panel will be furnished on the back wall of the compartment.

The rear compartment will be open into the rear side compartments.

The clear door opening of this compartment will be a minimum of 33.25" wide x 23.88" high.

Closing of the door will not require releasing, unlocking, or unlatching any mechanism and will easily be accomplished with one hand.
41969Bid #:
0594003 Door, Amdor, Rollup, Rear
Compartment

ROLLUP REAR COMPARTMENT DOOR
The rear compartment will have a rollup door.

The door will be double faced, aluminum construction, satin aluminum and manufactured by AMDOR™ brand rollup doors.

The door will be constructed using 1.00" extruded double wall aluminum slats which will feature a flat smooth interior surface to provide maximum protection against equipment hang-up. The slats will be connected with a structural driven ball and socket hinge designed to provide maximum curtain diaphragm strength. Mounting and adjusting the curtain will be done with a clip system that connects the curtain to the balancer drum allowing for easy tension adjustment without tools.

The slats will be mounted in reusable slat shoes with positive snap-lock securement.

Each slat will incorporate weather tight recessed dual durometer seals. One (1) fin will be designed to locate the seal within the extrusion. The second will serve as a wiping seal which will also allow for compression to prevent water ingression.

The door will be mounted in a one (1)-piece aluminum side frame with recessed side seals to minimize seal damage during equipment deployment. All seals including side frames, top gutters and bottom panel are to be manufactured utilizing non-marring materials.

Bottom panel flange of rollup door will be equipped with two (2) cut-outs to allow for easier access with gloved hands.

A polished stainless steel lift bar with locking key latches to be provided for each roll-up door. The keys to be Model 751 to match all compartment and cab doors. The lift bar will be located at the bottom of door with striker latches installed at the base of the side frames. Side frame mounted door strikers will include support beneath the stainless steel lift bar to prevent door curtain bounce, improve bottom seal life expectancy and to avoid false door ajar signals.

All injection molded rollup door wear components will be constructed of Type 6 Nylon.

The door will have a 3.00 inch diameter balancer/tensioner drum to assist in lifting the door.

The header for the rollup door assembly will not exceed 4.00".

A heavy-duty magnetic switch will be used for control of open compartment door warning lights. 0554995 No Body Modification Required

0625184 Guard, Drip Pan, S/S, Rollup Door,
Pumper

DOOR GUARD
There will be seven (7) compartment doors that will include a guard/drip pan designed to protect the rollup door from damage when in the retracted position and contain any water spray. The guard will be fabricated from stainless steel and installed left side rearward compartment, left side over the wheel compartment, left side forward compartment, right side rearward compartment, right side over the wheel compartment, right side forward compartment and rear compartment. 0641826 Electric Door Locks, Body Doors,
Amdor

ELECTRIC DOOR LOCKS
There will be seven (7) door(s) located all body compartments equipped with electric locks. The locks will be wired battery direct. The switch for control will be located cab key pad both sides. In the event of loss of power, a manual override is available. 0642303 Master Control, Electric Door Locks,
Body Drs and Cab Drs, Vel/Imp,Enf

CONTROL OF ELECTRIC DOOR LOCKS
The electric body door locks will be locked or unlocked with the cab controls.

In the event of loss of power, a manual override is available. 0732709 Pull Strap for Rollup Doors, Special
Length

ROLLUP DOOR PULL STRAPS
six (6) compartment doors will be provided with pull straps. The pull straps will be 12.00" long and black in color.

The straps will be installed directly to the inside of the rollup door.

The rollup door compartments to have these straps will be each side roll up door. 0616670 Lights, Compt, Pierce LED, Dual
Light Strips, Each Side of Door,
Pumper/Tanker

COMPARTMENT LIGHTING
There will be seven (7) compartment(s) with two (2) white 12 volt DC LED compartment light strips. The dual light strips will be centered vertically along each side of the door framing. There will be two (2) light strips per compartment. The dual light strips will be in all body compartment (s).

Any remaining compartments without light strips will have a 6.00" diameter Truck-Lite, Model:
79384 light. Each light will have a number 1076 one filament, two wire bulb.

Opening the compartment door will automatically turn the compartment lighting on. 0687146 Shelf Tracks, Painted MOUNTING TRACKS
There will be four (4) sets of tracks for mounting shelf(s) in LS1, LS2, RS1 and B1. These tracks will be installed vertically to support the adjustable shelf(s). The tracks will be painted to match the compartment interior.
42969Bid #:
0773380 SP Shelves, Adjustable, Full
Width/Depth, Low/Special Side
Height

ADJUSTABLE SHELVES
There will be one (1) shelf provided B1 upper. The shelf construction will consist of .188" aluminum painted nightspots. A capacity rating will not be available on this item due to a reduced side height being less than 2.00". Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track. Each shelf will have an inside wide of 36.00" and as deep as the compartment space will allow.

The shelves will be held in place by .12" thick stamped plated brackets and bolts.

The side height of the shelf/shelves will be as follows:

Front: 1.00" high
Rear: 2.00" high
Left & Right Sides: 2.00" high
0791839 SP Shelves, Fixed, 500 lb Capacity, Full
Width/Depth, Nightspots

FIXED SHELVES
There will be two (2) shelves with a capacity of 500 lb provided. The shelf construction will consist of .188" aluminum with 2.00" sides. The finish will be Nightspots 909017 paint. Each shelf will be fixed in its location in the compartment
The shelves will be held in place by .12" thick stamped plated brackets and bolts or angles bolted to the compartment as the engineer or shop floor see fit.

The location will be LS3 mounted above the C-Tech cabinet, LS1 forward of the partition at

28.00" from the floor.
0788782 SP Shelves, Adjustable, FW/FD, Painted,
Front Flange Down,Special
Reinforcement

ADJUSTABLE SHELVES
There will be one (1) shelf provided. The shelf construction will consist of .188" aluminum with

2.00" sides at each side and the rear. The front of the shelf will have a 1.00" lip flanged down with a 1.00" square tube provided across the midpoint of the bottom of the shelf to provide adequate structural integrity to the shelf. Each shelf will be painted to match the compartment interior. Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track.

The shelves will be held in place by .12" thick stamped plated brackets and bolts.

Each shelf will be designed to be .25" away from the back wall and the side mounting tracks. The shelf front will be .75" back from the door opening to allow for equipment shift. There will be a manufacturing tolerance of + or- .25" .

The location will be LS2 below the upper shelf that is to be located at 18" off the floor. 0600350 Shelves, Adj, 500 lb Capacity, Full
Width/Depth, Predefined Locations

ADJUSTABLE SHELVES
There will be four (4) shelves with a capacity of 500 lb provided.

The shelf construction will consist of .188" aluminum painted nightspots with 2.00" sides.

Each shelf will be infinitely adjustable by means of a threaded fastener, which slides in a track.

The shelves will be held in place by .12" thick stamped plated brackets and bolts.

The location(s) will be in RS1 in the lower third, in RS1 in the upper third, in LS2 in the upper third and in LS1 in the upper third to the left of the partition. 0647091 Tray, Floor Mounted, Slide-Out,
500lb, 2.00" Sides

SLIDE-OUT FLOOR MOUNTED TRAY
There will be one (1) floor mounted slide-out tray(s) provided.

Each tray will have 2.00" high sides and a minimum capacity rating of 500 lb in the extended position.

Each tray will be constructed of aluminum painted nightspots.

There will be two undermount-roller bearing type slides rated at 250 lb each provided. The pair of slides will have a safety factor rating of 2.

To ensure years of dependable service, the slides will be coated with a finish that is tested to withstand a minimum of 1,000 hours of salt spray per ASTM B117.

To ensure years of easy operation, the slides will require no more than a 50lb force for push-in or pull-out movement when fully loaded after having been subjected to a 40 hour vibration (shaker) test under full load. The vibration drive file will have been generated from accelerometer data collected from a heavy truck chassis driven over rough gravel roads in an unloaded condition.

Proof of compliance will be provided upon request.

Automatic locks will be provided for both the "in" and "out" positions. The trip mechanism for the locks will be located at the front of the tray for ease of use with a gloved hand.

The location(s) will be B1.
0725642 Cabinet, Drawer Assembly, CTECH,
Three Drawers, Up To 36" Wide, 24"
Deep

DRAWER ASSEMBLY
A slide-out drawer assembly will be installed LS3.

The clear dimensions of the first drawer starting at the top will be 3.00" with a face plate that is

4.00" high x 21.00" deep. The clear dimensions of the second drawer will be 5.75" with a face plate that is 6.00" high x 21.00" deep. The clear dimensions of the third drawer will be 9.75" with a face plate that is 10.00" high x 21.00" deep. Each drawer will be the same width and not exceed

36.00".

The drawers will have a capacity of 250 lb.

The drawers will be mounted in a cabinet housing constructed of light gray powder coated aluminum with anodized aluminum frames. The housing will be 24.00" deep, and completely enclose the drawer.

A full-length aluminum extruded rail will be provided at the top edge of each drawer. This rail will act as the latching mechanism as well as the handle for each drawer.

There will be a total of one (1) provided.
43969Bid #:
0540317 Toolboard, Swing-out, Alum, .188",
Peg Board

SWING OUT TOOLBOARD
A swing out aluminum toolboard will be provided.

It will be a minimum of 0.188" thick with .203" diameter holes in a pegboard pattern with 1.00" centers between holes.

A 1.00" x 1.00" aluminum tube frame will be welded to the edge of the pegboard.

The board will be mounted on a pivoting device at the front of the compartment on the top and bottom to allow easy movement in and out of the compartment. The maximum tool load will be 400 lb.

The board will have positive lock in the stowed and extended position.

The board will have a D-ring handle to secure it in the stowed position.

The board will be mounted stationary within the compartment.

One (1) toolboard(s) will be provided. The toolboard(s) will be painted nightspots 909017 and installed RS2 full height and width.
0726441 Partition, Trans Rear Compt PARTITION, TRANSVERSE REAR COMPARTMENT Two (2) partitions will be bolted in place to separate the left and right side rear compartments from the rear tailboard compartment. The partition will be body material painted nightspots 909017.
0726403 Partition, Vertical Compt, Special
Height

VERTICAL COMPARTMENT PARTITION
One (1) partition will be bolted in LS1, Mounted 20" from the rear bulkhead, also make partition

53.00" tall from the floor. (Match Previous Job # 35932). Each partition will be 53.00" tall from the floor vertical height of the compartment. (Match Previous Job # 35932) vertical height of the compartment. Each partition will be painted nightspots 909017. 0004047 Aluminum, .188" Smooth Aluminum,
"DA", on Compartment Floor

COMPARTMENT FLOOR SCUFFPLATE
Smooth aluminum will be provided on the floor of one (1) compartments. The scuffplate(s) will be .188" thick with a "DA" finish. The locations will be RS1.

The edges of the aluminum scuffplate will be completely caulked before installation to prevent corrosion.
0004005 Aluminum Treadplate on
Compartment Floor

COMPARTMENT FLOOR SCUFFPLATE
Aluminum treadplate will be provided on the floor of two (2) compartments. The locations will be, LS1, RS3.

The edges of the treadplate will be completely caulked before installation to prevent corrosion. 0674891 Lip, 1.00" Retaining, Each

1.00" RETAINING LIP
A 1.00" lip will be provided full width of LS1 floor to contain the equipment. The lip will be finished to match the compartment interior.
0692510 SP Bracket, SCBA, Zico, ULLH, Load &
Lock, Mounted at 45 Degrees

SCBA HOLDER
A total of one (1) Ziamatic model ULLH SCBA holder bracket. This bracket will include a backplate, two seats, a footplate and the model LLS ("Load & Lock") strap to hold the bottle in the bracket. The bracket seats will be a "one size fits all" style seat and will accommodate SCBA cylinders from the high pressure 30-minute to the high pressure 60-minute.

The bracket will be mounted on a 45 degree wall bracket.

The brackets will be mounted LS3 on shelf tracks, locate at pick up. 0076795 Bracket, SCBA, Zico, ULLH, Load &
Lock, Mounted

SCBA HOLDER
A total of one (1) Ziamatic model ULLH SCBA holder bracket. This bracket will include a backplate, two seats, a footplate and the model LLS ("Load & Lock") strap to hold the bottle in the bracket. The bracket seats will be a "one size fits all" style seat and will accommodate SCBA cylinders from the high pressure 30-minute to the high pressure 60-minute.

The brackets will be mounted LS3 - locate at pick up.
0044903 Netting, Retention 1.00" Nylon Strap,
Side Fastened, 2.00" Box Pattern

RETENTION NETTING
Retention netting will be provided to retain compartment equipment from laying against the compartment door. The net(s) will be located LS1 upper left portion, match 32039 - see photo.

Each compartment door opening will be provided with a heavy black nylon webbing made of

1.00" nylon strap with a 2.00" box pattern. The nylon webbing will be fastened to one (1) side of the compartment in a fixed manner. The remaining sides will be secured with Hook and loop straps fastener(s).

A total of one (1) will be provided.
0755528 Toolboard, Alum, .188", No Holes,
Back Wall Mounted, Special

TOOLBOARD
There will be 3/16" thick aluminum toolboard (no holes) painted nightspots 909017 installed on the back wall of one (1) compartment(s). The toolboard will be mounted using two (2) horizontal tracks. Retainers will be used to mount the toolboard to the tracks. The toolboard will be located in the RS2 and mounted The board will be split into two pieces for easier removal. (Please match Job # 35932 which used deleted option 629334).
44969Bid #:
0027090 Tracks, Equipment Mounting,
Horizontal

MOUNTING TRACKS
There will be three (3) sets of tracks for mounting equipment. These tracks will be installed horizontally on the back wall of the compartment(s).

The compartment(s) with mounting tracks will be full width in LS2, LS3, RS3 - locate at pick up. 0024016 Rub Rail, Aluminum Extruded, Side &
Rear of Body

RUB RAIL
Bottom edge of the side and rear of the body compartments will be trimmed with a bright aluminum extruded rub rail.

Trim will be 2.12" high with 1.38" flanges turned outward for rigidity.

The rub rails will not be an integral part of the body construction, which allows replacement in the event of damage.
0784811 Fender Crowns, Rear, Stainless,
w/Removable Liner

BODY FENDER CROWNS
Polished stainless steel fender crowns will be provided around the rear wheel openings with a dielectric barrier will be provided between the fender crown and the fender sheet metal to prevent corrosion.

The fender crowns will be held in place with stainless steel screws that thread directly into a composite nut and not directly into the parent body sheet metal to eliminate dissimilar metals contact and greatly reduce the chance for corrosion. Rubber welting will be provided between the body and crown.

BODY FENDER LINER
A aluminum painted to match the lower body color fender liner will be provided. The liners will be removable to aid in the maintenance of rear suspension components. 0816944 Hose, Hard Suction, Provided by Fire
Department, NFPA/ULC 2024

HARD SUCTION HOSE
Hose is not on the apparatus as manufactured. The fire department will provide suction or supply hose.

There will be Two (2) lengths of 10' long x 6.00" diameter hose provided and equipped with rocker lug couplings provided on the ends.
0004095 Troughs, HSH, (1), Each Side, Steel HOSE TROUGHS Hard suction hose will be carried in two (2) V-shaped troughs, one (1) each side, and held in place by chrome plated, quarter turn, spring loaded clamps.

Troughs will be constructed of steel and painted job color. 0626229 Handrails, Side Pump Panels, Per
Print

HANDRAILS
The handrails will be 1.25" diameter knurled aluminum to provide a positive gripping surface.

Chrome plated end stanchions will support the handrail. Plastic gaskets will be used between end stanchions and any painted surfaces.

Drain holes will be provided in the bottom of all vertically mounted handrails.

Handrails will be provided to meet current edition of applicable NFPA standards. The handrails will be installed as noted on the sales drawing.
0004126 Handrails, Beavertail, Standard

HANDRAILS
One (1) vertical handrail will be located on each rear beavertail. 0082756 Handrail, Rear, Below Hose Bed

HANDRAIL
One (1) knurled aluminum handrail will be installed below the hose bed. 0004150 Handrail, Extra - 15-20" Long ADDITIONAL HANDRAIL Two (2) handrails will be mounted forward portion of the D/S and P/S hosebed cover. match 35932. The handrail(s) will be constructed of knurled aluminum. 0519354 Handrail, Extra - 12"

ADDITIONAL HANDRAIL
One (1) handrail, 12.00" long, will be mounted Directly below reel line roller assembly RS, attached to dunnage area side sheet.. The handrail(s) will be constructed out of knurled aluminum.
0657651 Compt, Air Bottle, Double, Fender
Panel
AIR BOTTLE STORAGE (Double)
A quantity of three (3) air bottle compartments, 15.25" wide x 7.75" tall x 26.00" deep, will be provided on the left side rearward of the rear wheels, on the right side forward of the rear wheels and on the right side rearward of the rear wheels. A polished stainless steel door with a chrome plated flush lift & turn latch will be provided to contain the air bottle. A dielectric barrier will be provided between the door hinge, hinge fasteners and the body sheet metal.

Inside the compartment, "W" shaped insert formed of composite materials will be provided. 45969Bid #:
0724007 SP Storage Bin, Extinguisher, One, 45
Degree Tilt Out

EXTINGUISHER STORAGE BIN
A storage bin will be provided for storage of one (1) hand held fire extinguisher. This storage bin will be installed PS compartment behind crew cab door (watercan) DS compartment behind crew cab door (drychem). Each bin will be size to hold an extinguisher that is the following diameter and height: Watercan (PS) 24.5" Tall x 8" Diameter Dry Chem (DS) 24" Tall x 8.5" Diameter. The bin will tilt out 45 degrees and be formed out of aluminum with Dura-surf on the floor. 0816909 Ladder, Extension, Provided by Fire
Department, NFPA/ULC 2024

EXTENSION LADDERS PROVIDED BY FIRE DEPARTMENT
The extension ladder is not on the apparatus as manufactured. There will be one (1) extension ladder(s) provided and installed by the fire department. The ladder(s) will be a 24' Duo-Safety 900-A, two (2)-section.
0816887 Ladder, Roof, Provided by Fire
Department, NFPA/ULC 2024

ROOF LADDER PROVIDED BY FIRE DEPARTMENT
The roof ladder is not on the apparatus as manufactured. There will be one (1) roof ladder(s) provided and installed by the fire department. The ladder(s) will be a 14' Duo-Safety 775-A. 0818211 SP Ladders/Backboard Btwn Tank &
S.Sht, RS, Enclosed, RPH, Vinyl,
Spcl Mt

LADDER STORAGE
The ladders and a single backboard will be stored between the water tank and the right side compartments.

The ladders will extend into the pump compartment just to the rear of the water pump discharges.

Backboard dimensions will be 16"x 72" x 1.50".

The ladder storage area will be enclosed as practical by means of sheet metal to protect the ladders from road dirt. A black rubber boot will be provided to enclosed the ladders in the gap between the pump house and the body. The ladders that extend into the pump house will also be enclosed. The pump house portion of the enclosure will be made of black vinyl. The vinyl portion will be fastened to the pumphouse structure with side release buckles. The vinyl portion will allow the user to move the enclosure aside to access the pump area.

Each ladder will be stored vertically in a separate stainless steel storage trough. Each stainless steel trough will be lined with Dura-Surf nylon slides.

A bright aluminum treadplate enclosure will be provided at the rear of the body to properly contain the ladders This enclosure will extend to the rear of the side body compartments.

The ladders will be mounted fly section inboard.

The enclosure will also include a vertically hinged aluminum treadplate door with a locking D- handle latch with key Model 751 to access the ladders. The door will be hinged along the inboard edge.
0820257 Ladder, 10' Duo-Safety 585A,
Provided by Fire Dept

FOLDING LADDER PROVIDED BY FIRE DEPARTMENT
The folding ladder is not on the apparatus as manufactured. There will be one (1) 10' aluminum Series 585-A Duo-Safety folding ladder provided by the fire department. 0816920 Pike Pole, Provided by Fire
Department, NFPA/ULC 2024

PIKE POLE PROVIDED BY FIRE DEPARTMENT
The pike poles are not on the apparatus as manufactured. The fire department will provide and mount the pike poles.

There will be one (1) pike pole(s) provided. The pike pole(s) will be a Akron 10' pike pole. 0816918 Pike Pole, 6', Provided by Fire
Department, NFPA/ULC 2024
6' PIKE POLE PROVIDED BY FIRE DEPARTMENT
The pike pole is not on the apparatus as manufactured. The fire department will provide and mount the pike poles.

There will be one (1) 6' pike pole(s) provided. The pike pole(s) will be a Duo-Safety 6' pike pole. 0004361 Tubes, Alum, Pike Pole Storage

PIKE POLE STORAGE
Aluminum tubing will be used for the storage of two (2) pike poles and will be located in ladder storage compartment. If the head of a pike pole can come in contact with a painted surface, a stainless steel scuffplate will be provided.
0004379 Bell, 12" Chrome w/Eagle, Mounted
on Cab Corner
BELL
A chrome plated, 12.00" bronze cast bell, complete with an eagle, will be mounted on the passenger side radiused corner of cab face. The cab will be properly reinforced to support the weight of the bell. A rope pull, for the bell, will be installed inside the cab. 0504812 Label, "NOT A STEP" WARNING LABEL(S)
There will be two (2) label(s) indicating "NOT A STEP", provided one (1) each side on top of the side crew cab directional light housings.
46969Bid #:
0785102 Steps, Folding, Front of Body, Cargo
Bed Access, w/LED, Trident

FOLDING STEPS FRONT OF BODY
Folding steps will be provided full height on the left side and right side body compartments to provide access to the cargo bed. Steps will be spaced evenly on the sales drawing. Actual quantity may vary due to pump panel interferences but will meet the NFPA required maximum stepping height.

The Trident steps will be bright finished, non-skid with a black tread coating on the stepping surface.

The step will incorporate an LED light to illuminate the stepping surface.

The steps can be used as a hand hold with two openings wide enough for a gloved hand. 0592994 Steps, Folding, Rear of Body, w/LED,
Trident

REAR FOLDING STEPS
Bright finished, non-skid folding steps with a black tread coating on the stepping surface will be provided at the rear. Each step will incorporate an LED light to illuminate the stepping surface.

The steps can be used as a hand hold with two openings wide enough for a gloved hand. 0650261 I Zone Bracket, Pair, Folding Style

I-ZONE BRACKETS
Two (2) flip-out I-Zone brackets will be provided and mounted at the rear of the apparatus, just below the rear flood lights, (Match job 35932). The brackets will be designed with adequate reinforcement to eliminate flexing of the body (oil canning). 0005498 Pump House, Side Control, 52"

PUMP COMPARTMENT
The pump compartment will be separate from the hose body and compartments so that each may flex independently of the other. It will be a fabricated assembly of steel tubing, angles and channels which supports both the fire pump and the side running boards.

The pump compartment will be mounted on the chassis frame rails with rubber biscuits in a four point pattern to allow for chassis frame twist.

Pump compartment, pump, plumbing and gauge panels will be removable from the chassis in a single assembly.

PUMP MOUNTING
Pump will be mounted to a substructure which will be mounted to the chassis frame rail using rubber isolators. The mounting will allow chassis frame rails to flex independently without damage to the fire pump.

PUMP CONTROL PANELS (Side Control)
All pump controls and gauges will be located at the left side of the apparatus and properly marked.

The control panels will be 52.00" wide.

← All documents from this meeting