City Council and Concurrent Authorities
April 28, 2026

416
(Rev. ..202)
 Agreement Term: The Term of this Agreement shall remain in effect from date of the signing of this Agreement through
City.

AGREEMENT
The City of Stockton, a California municipal corporation on behalf of itself and its a ssociated en tities ("City"), and the above-n amed Contractor (“Contractor”), do hereby agree that City shall be granted the pricing, terms, and conditions under the above referenced GSA Contract
No. 47QTCA25D00DR (“COOP”) as such
may be amended from time to time. The COOP and associated documents referenced in the agreement are incorporated herein as Exhibit A to this City
Cooperative/Piggyback Purchase Agreement (“Agreement”).

Contractor shall grant such pricing, terms, and conditions to City for all procurements of goods and services, whether taking place on a City purchase order, purchasing card (credit card), or other purchasing modality, whether via telephone, via the Contrac
tor website, or via direct purchase at a Contractor retail location.

August 7, 2030, unless terminated earlier by the
If the Cooperative/Piggyback Agency extends the COOP with Contractor by a written amendment, the City has
the option to extend the term of this Agreement by written amendment not to go beyond the term stated in the COOP
fully executed amendment.
 Insurance
and Hold Harmless: In addition to the pricing, terms and conditions stated in the COOP and the associated documents incorporated herein as Exhibit A, Contractor shall, at Contractor’s sole cost and expense and for the full term of the Agreement or any extension thereof, obtain and maintain at least all the insurance r
equirements listed in attached Exhibit B.

To the fullest extent permitted by law, Contractor shall hold harmless, defend and indemnify City of Stockton and its officers, officials, employees and volunteers from and
against
any and all liability, loss, damage, expense, costs (including without limitation costs and fees of litigation) of every nature arising out of or in connection with Contractor’s performance of work hereunder or its failure to comply with any of its obligations contained in the
agreement, except such loss or damage which was caused by the sole negligence or willful
misconduct of the City of Stockton. This obligation is independent of, and shall not in any way be limited by, the minimum Insurance obligations contained in this Agreement. These obligations shall survive the completion or termination of this A
greement.

3. Compensation: City and Contractor do hereby enter into this Agreement for Fleet Management Services Software available inthe above-named COOP and associated documents incorporated herein as Exhibit A andreferenced in the attached quote Exhibit C. In no way, shall payment to the Contractorduring the term of this Agreement exceed $630,796 for the purchase of Fleet Management System Software and services.

Any person signing this Agreement on behalf of City orContractor does warrants that he or she has full authority to do so.

ATTACHMENT A

417

ATTACHMENT A

418
(Rev. ..202)

EXHIBIT A

ATTACHMENT A

419

GENERAL SERVICES ADMINISTRATION
Federal Acquisition Service
Authorized Federal Supply Schedule FSS Price List
Online access to contract ordering information, terms and conditions, pricing, and the option to create an electronic delivery order are available through GSA Advantage!®. The website for GSA Advantage!® is: https://www.GSAAdvantage.gov.

Multiple Award Schedule
FSC Group: Information Technology
Contract Number: 47QTCA25D00DR
Contract period: August 8, 2025 through August 7, 2030
Chevin Fleet Solutions LLC
881 Main St, PO Box 2203,
Fitchburg, Massachusetts, 01420
703-561-1100
www.chevinfleet.com
Contract Administrator: Gareth Roulston
Email: [email protected]
Business size: Large Business
For more information on ordering, go to the following website: https://www.gsa.gov/schedules Price list current as of Modification #PA-0001 effective August 8, 2025 Prices Shown Herein are Net (discount deducted)

ATTACHMENT A

420
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

CUSTOMER INFORMATION
1a. Table of awarded special item number(s) with appropriate cross-reference to item descriptions and awarded price(s).

SINs Cooperative Recovery SIN Title
518210C 518210CSTLOC 518210CRC Cloud Computing and Cloud Related IT Professional Services
OLM OLMSTLOC OLMRC Order-Level Materials (OLMs)
1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price. Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply. See Below 1c. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided. If hourly rates are not applicable, indicate “Not applicable” for this item. See Below

2. Maximum order:

SINs Maximum Order
518210C $500,000
OLM $250,000

3. Minimum order: $100

4. Geographic coverage (delivery area). Worldwide

5. Point(s) of production (city, county, and State or foreign country). Fitchburg, Massachusetts USA

6. Discount from list prices or statement of net price. Government Net Prices (discounts already deducted.)

7. Quantity discounts. None

8. Prompt payment terms. Net 30 days. Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9. Foreign items (list items by country of origin). Not Applicable 10a. Time of delivery. (Contractor insert number of days.) Contact Contractor

ATTACHMENT A

421
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
10b. Expedited Delivery. Items available for expedited delivery are noted in this price list. Contact Contractor
10c. Overnight and 2-day delivery. Contact Contractor
10d. Urgent Requirements. Contact Contractor

11. F.O.B. point(s). Destination
12a. Ordering address(es). 881 Main St. PO Box 2203 Fitchburg, MA 01420 12b. Ordering procedures: See Federal Acquisition Regulation (FAR) 8.405-3.

13. Payment address(es). 881 Main St. PO Box 2203 Fitchburg, MA 01420

14. Warranty provision. Standard Commercial Warranty Terms & Conditions

15. Export packing charges, if applicable. Not Applicable

16. Terms and conditions of rental, maintenance, and repair (if applicable). Not Applicable

17. Terms and conditions of installation (if applicable). Not Applicable 18a. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable). Not Applicable
18b. Terms and conditions for any other services (if applicable). Not Applicable

19. List of service and distribution points (if applicable). Not Applicable

20. List of participating dealers (if applicable). Not Applicable

21. Preventive maintenance (if applicable). Not Applicable 22a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants). Not Applicable
22b. If applicable, indicate that Section 508 compliance information is available for the information and communications technology (ICT) products and services and show where full details can be found (e.g. contractor’s website or other location.) ICT accessibility standards can be found at:
https://www.Section508.gov/.

Not Applicable

23. Unique Entity Identifier (UEI) number. GJPTAMFL4894

ATTACHMENT A

422
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

24. Notification regarding registration in System for Award Management (SAM) database. Contractor registered and active in SAM. CAGE Code: 37LP0.

Services Awarded under SIN 518210C
SIN LABOR CATEGORY GSA Rate
518210C Implementer (Cloud), Managed Services $281.11
518210C Project Manager (Cloud) $223.98
518210C Technical Business Analyst (Cloud) $200.40
518210C Developer (Cloud) $223.98
518210C Implementation Consultant (Cloud) $231.23
Implementer (Cloud), Managed Services
SIN # 518210C
Required Education/Experience:
• Bachelor’s Degree
• Seven (7) or more years of experience
Responsibilities:

Chevin’s Implementers (Cloud - Managed Services), are assigned to projects which can benefit from an agile methodology. Experienced in SCRUM, they perform the role of SCRUM Master and carry out all associated tasks in collaboration with the customer team, including daily stand-up meetings, user story documentation, acceptance criteria definition, backlog prioritization, estimation & sprint planning and the facilitation of sprint end demos and retrospective meetings. In addition, the Implementer (Cloud - Managed Services) is responsible for the initial certified application installation, process and system documentation, application configuration and screen design, system design and prototype testing, system security protocols as well as direct support of the data migration process. They offer a wide-ranging mix of hands-on fleet management experience, process design as well as system implementation capabilities (including SQL, JavaScript and HTML), and will work with client subject matter experts on a remote as well as on-site basis as required. Working in conjunction with Chevin’s implementation and support team, Chevin’s Implementers (Cloud - Managed Services) are responsible for the precise delivery of application functionality to meet client specific functional requirements.

Project Manager (Cloud)
SIN # 518210C
Required Education and Experience:
• Bachelor’s Degree
• Five (5) or more years of experience
Responsibilities:

Chevin’s Project Manager (Cloud) is responsible for the management and oversight of all Chevin related resources, tasks, and deliverables during the project insuring that Chevin’s quality standards are adhered to and expected timelines are maintained. Chevin’s Project Manager (Cloud) provides regular status reports, updates, and maintains issue logs and works with client staff to schedule project team conference calls as required insuring that project goals are met. Chevin’s Project Manager (Cloud) is the

ATTACHMENT A

423
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
primary point of contact for any project related issue that may arise and is personally responsible for addressing all project related concerns.

Technical Business Analyst (Cloud)
SIN # 518210C
Required Education and Experience:
• Bachelor’s Degree
• Two (2) or more years of experience
Responsibilities:

Chevin’s Business Analysts are responsible for working closely with our customers to translate the customer's requirements into Functional and Technical specifications that will be used by our Implementation Consultants and Developers to configure our systems to satisfy these requirements.

They describe all system functionality to be delivered in a clear and concise way, which allows the customer to understand and validate the system design. They are experienced in use case writing, process and system documentation, system design and prototype testing, system security protocols, various integration technologies and data migration approaches. Chevin’s Business Analyst offers a wide-ranging mix of hands-on fleet management experience, process design and system implementation capabilities. They will work with client subject matter experts on a remote as well as onsite basis as required. During the implementation process Chevin Business Analysts report directly to Chevin’s Project Manager.

Developer (Cloud)
SIN # 518210C
Required Education and Experience:
• Bachelor’s Degree
• Three (3) or more years of experience
Responsibilities:

Chevin's Developers (Cloud) write the code at the core of our applications. On customer engagements, they are responsible for building custom functionality based on Technical specifications produced by Chevin's Business Analyst collaborating with the customer. Functionality that they deliver can range from custom API configuration to bespoke workflows to manage complex customer processes. They are experienced in a variety of backend and front end technologies including (but not limited to) C#, ASP.NET, SQL, HTML, CSS, node.js and JavaScript. They are also experienced in the latest coding standards and best practices, ensuring efficient, clean and maintainable code.

Implementation Consultant (Cloud)
SIN # 518210C
Required Education and Experience:
• Bachelor’s Degree
• Two (2) or more years of experience
Responsibilities:

Chevin’s Implementers work from Functional and Technical system specifications to configure Chevin's applications to meet customer requirements during the onboarding process. They are skilled in HTML, CSS, JavaScript and SQL. They are experts in Chevin's applications and realize system designs by applying this knowledge. They contribute to backlog prioritization, estimation & sprint planning and the facilitation of sprint end demos and retrospective meetings. Chevin’s Implementation Consultants are

ATTACHMENT A

424
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
responsible for the precise delivery of application functionality to meet client specific functional requirements. During the implementation process Chevin Implementation Consultants report directly to Chevin’s Project Manager.

Substitutions: One year of experience is the equivalent of one year of education. One year of education is the equivalent of one year of experience. Certification related to the technology is equivalent to two years of experience or education requirement.

Service Contract Labor Standards: The Service Contract Labor Standards (SCLS), formerly known as the Service Contract Act (SCA), is applicable to this contract as it applies to the entire Multiple Award Schedule (MAS) and all services provided. While no specific labor categories have been identified as being subject to SCLS/SCA due to exemptions for professional employees (FAR 22.1101,

22.1102 and 29 CRF 541.300), this contract still maintains the provisions and protections for SCLS eligible labor categories. If and / or when the contractor adds SCLS labor categories to the contract through the modification process, the contractor must inform the Contracting Officer and establish a SCLS matrix identifying the GSA labor category titles, the occupational code, SCLS labor category titles and the applicable WD number. Failure to do so may result in cancellation of the contract.

Products Awarded under SIN 518210C
SIN Part No. Product Name Product Description UOI GSA Price 518210C ADV-
UG-0-
500
FleetWave
Advanced
Perpetual to
Saas Upgrade
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced Upgrade VPB 0-
500
Per
Vehicle
Per
Month
$5.62
518210C ADV-
UG-
501-
2000
FleetWave
Advanced
Perpetual to
Saas Upgrade
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced Upgrade VPB
501-2000
Per
Vehicle
Per
Month
$4.12
518210C ADV-
UG-
2001-
5000
FleetWave
Advanced
Perpetual to
Saas Upgrade
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Per
Vehicle
Per
Month
$3.38

ATTACHMENT A

425
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
SIN Part No. Product Name Product Description UOI GSA Price Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced UpgradeVPB
2001-5000
518210C ADV-
UG-
5001+
FleetWave
Advanced
Perpetual to
Saas Upgrade
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced UpgradeVPB
5001+
Per
Vehicle
Per
Month
$2.62
518210C ADV-
UG-
AST-0+
FleetWave
Advanced
Perpetual to
Saas Upgrade
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced Upgrade
Ancillary Equipment/Assets VPB 0+
Per
Vehicle
Per
Month
$0.37
518210C ADV-0-
500
FleetWave
Advanced
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced VPB 0-500
Per
Vehicle
Per
Month
$7.03
518210C ADV-
501-
2000
FleetWave
Advanced
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced VPB 501-2000
Per
Vehicle
Per
Month
$5.16
518210C ADV-
2001-
5000
FleetWave
Advanced
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Per
Vehicle
Per
Month
$4.22

ATTACHMENT A

426
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
SIN Part No. Product Name Product Description UOI GSA Price Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced VPB 2001-5000
518210C ADV-
5001+
FleetWave
Advanced
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced VPB 5000+
Per
Vehicle
Per
Month
$3.28
518210C ADV-
AST-0+
FleetWave
Advanced
FleetWave – Web based SaaS Fleet
Management Information System
Modules include: Vehicle/Asset
Management, Work Order, Inventory,
Fuel, Warranty, Work Requests,
Driver and Accident Management,
Maintenance Scheduling, and Query
Builder. Advanced Ancillary
Equipment/Assets VPB 0+
Per
Vehicle
Per
Month
$0.47

ATTACHMENT A

427
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

MASTER SUBSCRIPTION AGREEMENT
THIS MASTER SUBSCRIPTION AGREEMENT GOVERNS CUSTOMER’S ACQUISITION AND USE OF CHEVIN SERVICES. CAPITALIZED TERMS HAVE THE DEFINITIONS SET FORTH HEREIN.

IF CUSTOMER REGISTERS FOR A FREE TRIAL OF CHEVIN SERVICES OR FOR FREE

SERVICES, THE APPLICABLE PROVISIONS OF THIS AGREEMENT WILL ALSO GOVERN THAT FREE TRIAL OR THOSE FREE SERVICES.

BY ACCEPTING THIS AGREEMENT, BY EXECUTING THIS AGREEMENT IN WRITING. IF

THE INDIVIDUAL ACCEPTING THIS AGREEMENT IS ACCEPTING ON BEHALF OF A

COMPANY OR OTHER LEGAL ENTITY, SUCH

INDIVIDUAL REPRESENTS THAT THEY HAVE THE AUTHORITY TO BIND SUCH ENTITY

AND ITS AFFILIATES TO THESE TERMS AND
CONDITIONS, IN WHICH CASE THE TERM “CUSTOMER” SHALL REFER TO SUCH ENTITY AND ITS AFFILIATES AND NOT THE INDIVIDUAL. IF THE INDIVIDUAL ACCEPTING THIS

AGREEMENT DOES NOT HAVE SUCH AUTHORITY, OR DOES NOT AGREE WITH THESE

TERMS AND CONDITIONS, SUCH INDIVIDUAL MUST NOT ACCEPT THIS AGREEMENT AND MAY NOT USE THE SERVICES.

The Services may not be accessed for purposes of monitoring their availability, performance or functionality, or for any other benchmarking or competitive purposes.

CHEVIN’s direct competitors are prohibited from accessing the Services, except with CHEVIN’s prior written consent. This Agreement was last updated on September 23, 2020. It is effective between Customer and CHEVIN as of the date set forth in the Purchase Order, Statement of Work, or similar document (the “Effective Date”).

DEFINITIONS
“Affiliate” means any entity that directly or indirectly controls, is controlled by, or is under common control with the subject entity. “Control,” for purposes of this definition, means direct or indirect ownership or control of more than 50% of the voting interests of the subject entity. “Agreement” means this Master Subscription Agreement.
“Beta Services” means CHEVIN services or functionality that may be made available to Customer to try at its option at no additional charge which is clearly designated as beta, pilot, limited release, developer preview, non-production, evaluation, or by a similar description. “CHEVIN” means the CHEVIN FLEET SOLUTION company described in the “CHEVIN Contracting Entity, Notices, Governing Law, and Venue” section below. “Confidential Information” means all written or oral information, disclosed by one party (the “disclosing party”) to the other (the “recipient”), related to the business, products, services or operations of the disclosing party that has been identified as confidential or that by the nature of the information or the circumstances surrounding disclosure ought reasonably to be treated as confidential, including, without limitation: (a) trade secrets, inventions, ideas, processes, computer source and object code, formulae, data, programs, other works of authorship, know-how, improvements, discoveries, developments, designs and techniques; (b) information regarding products, plans for research and development, marketing and business plans, budgets, financial statements, contracts, prices, employees, suppliers and agents and (c) information regarding the skills and compensation of the disclosing party’s employees, contractors, and other agents. Without limiting the foregoing, and for purposes of this Agreement, the Customer Data is the Confidential Information of Customer. When the end user is the

ATTACHMENT A

428
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
Federal Government, neither this Agreement nor the pricing terms are confidential information notwithstanding any such markings.
“Content” means information obtained by CHEVIN from publicly available sources or its third-party content providers and made available to Customer through the Services, Beta Services or pursuant to an Order Form, as more fully described in the Documentation. “Customer” means in the case of an individual accepting this Agreement on behalf of a company or other legal entity, the company or other legal entity for which such individual is accepting this Agreement, and Affiliates of that company or entity (for so long as they remain Affiliates) which have entered into Order Forms.
“Customer Data” means electronic data and information submitted by or for Customer to the Services, excluding Content and Non-CHEVIN Applications. “Documentation” means the applicable Service’s Trust and Compliance documentation and its usage guides and policies, as updated from time to time, accessible via help tools of the applicable Service. “Free Services” means Services that CHEVIN makes available to Customer free of charge. Free Services exclude Services offered as a free trial and Purchased Services. “Malicious Code” means code, files, scripts, agents or programs intended to do harm, including, for example, viruses, worms, time bombs and Trojan horses.
“Marketplace” means an online directory, catalog or marketplace of applications that interoperate with the Services, including, for example, the FleetWave Store. “Non-CHEVIN Application” means a Web-based, mobile, offline or other software application functionality that interoperates with a Service, that is provided by Customer or a third party and/or listed on a Marketplace including as Chevin Labs or under similar designation. Non-CHEVIN Applications, other than those obtained or provided by Customer, will be identifiable as such. “Order Form” means an ordering document or online order specifying the Services to be provided hereunder that is entered into between Customer and CHEVIN or any of their Affiliates, including any addenda and supplements thereto. By entering into an Order Form hereunder, an Affiliate agrees to be bound by the terms of this Agreement as if it were an original party hereto. “Purchased Services” means Services that Customer or Customer’s Affiliate purchases under an Order Form or online purchasing portal, as distinguished from Free Services or those provided pursuant to a free trial. “Services” means the products and services that are ordered by Customer under an Order Form or online purchasing portal, or provided to Customer free of charge (as applicable) or under a free trial, and made available online by CHEVIN, including associated CHEVIN offline or mobile components, as described in the Documentation. “Services” exclude Content and Non-CHEVIN Applications.
“User” means an individual who is authorized by Customer to use a Service, for whom Customer has purchased a subscription (or in the case of any Services provided by CHEVIN without charge, for whom a Service has been provisioned), and to whom Customer (or, when applicable, CHEVIN at Customer’s request) has supplied a user identification and password (for Services utilizing authentication). Users may include, for example, employees, consultants, contractors and agents of Customer, and third parties with which Customer transacts business.

CHEVIN RESPONSIBILITIES
Subject to the terms and conditions of this Agreement, Chevin will provide the Services to Customer in a workmanlike and professional manner in accordance with industry standards. The Services to be provided by Chevin under this Agreement will be described and set forth in one or more Order Forms agreed upon by the parties from time to time.

ATTACHMENT A

429
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

2.1 Provision of Purchased Services. CHEVIN will (a) make the Services and Content available to Customer pursuant to this Agreement, and the applicable Order Forms and Documentation, (b) provide applicable CHEVIN standard support for the Purchased Services to Customer at no additional charge, and/or upgraded support if purchased, (c) use commercially reasonable efforts to make the online Purchased Services available 24 hours a day, 7 days a week, except for: (i) planned downtime (of which CHEVIN shall give advance electronic notice), and (ii) any unavailability caused by circumstances beyond CHEVIN’s reasonable control, including, for example, an act of God, act of government, flood, fire, earthquake, civil unrest, act of terror, strike or other labor problem (other than one involving CHEVIN employees), Internet service provider failure or delay, Non-CHEVIN Application, or denial of service attack, and (d) provide the Services in accordance with laws and government regulations applicable to CHEVIN’s provision of its Services to its customers generally (i.e., without regard for Customer’s particular use of the Services), and subject to Customer’s use of the Services in accordance with this Agreement, the Documentation and the applicable Order Form.

2.2 Protection of Customer Data. CHEVIN will maintain appropriate administrative, physical, and technical safeguards for protection of the security, confidentiality, and integrity of Customer Data, as described in the Documentation. Those safeguards will include, but will not be limited to, measures designed to prevent unauthorized access to or disclosure of Customer Data (other than by Customer or Users)... Upon request by Customer made within 30 days after the effective date of termination or expiration of this Agreement, CHEVIN will make Customer Data available to Customer for export or download as provided in the Documentation. After such 30-day period, CHEVIN will have no obligation to maintain or provide any Customer Data, and as provided in the Documentation will thereafter delete or destroy all copies of Customer Data in its systems or otherwise in its possession or control, unless legally prohibited.

2.3 CHEVIN Personnel. CHEVIN will be responsible for the performance of its personnel (including its employees and contractors) and their compliance with CHEVIN’s obligations under this Agreement, except as otherwise specified in this Agreement.

2.4 Beta Services. From time to time, CHEVIN may make Beta Services available to Customer at no charge. Customer may choose to try such Beta Services or not in its sole discretion.

2.5 Free Trial. If Customer registers on CHEVIN’s or an Affiliate’s website for a free trial, CHEVIN will make the applicable
Service(s) available to Customer on a trial basis free of charge until the earlier of (a) the end of the free trial period for which
Customer registered to use the applicable Service(s), or (b) the start date of any Purchased Service subscriptions ordered by Customer for such Service(s), or (c) termination by CHEVIN in its sole discretion. Additional trial terms and conditions may appear on the trial registration web page. Any such additional terms and conditions are incorporated into this Agreement by reference and are legally binding. ANY DATA CUSTOMER ENTERS INTO THE SERVICES, AND ANY

CUSTOMIZATIONS MADE TO THE SERVICES BY OR FOR CUSTOMER, DURING CUSTOMER’S FREE TRIAL WILL BE PERMANENTLY LOST UNLESS CUSTOMER

PURCHASES A SUBSCRIPTION TO THE SAME SERVICES AS THOSE COVERED BY THE

TRIAL, PURCHASES APPLICABLE

UPGRADED SERVICES, OR EXPORTS SUCH DATA, BEFORE THE END OF THE TRIAL PERIOD. CUSTOMER CANNOT TRANSFER

DATA ENTERED OR CUSTOMIZATIONS MADE DURING THE FREE TRIAL TO A SERVICE

THAT WOULD BE A DOWNGRADE FROM

ATTACHMENT A

430
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
THAT COVERED BY THE TRIAL (E.G., FROM ENTERPRISE EDITION TO PROFESSIONAL EDITION); THEREFORE, IF CUSTOMER PURCHASES A SERVICE THAT WOULD BE A

DOWNGRADE FROM THAT COVERED BY THE TRIAL, CUSTOMER MUST EXPORT

CUSTOMER DATA BEFORE THE END OF THE TRIAL PERIOD OR CUSTOMER DATA WILL BE PERMANENTLY LOST.

NOTWITHSTANDING THE “REPRESENTATIONS, WARRANTIES, EXCLUSIVE REMEDIES AND DISCLAIMERS” SECTION AND
“INDEMNIFICATION BY CHEVIN” SECTION BELOW, DURING THE FREE TRIAL THE SERVICES ARE PROVIDED “AS-IS” WITHOUT

ANY WARRANTY AND CHEVIN SHALL HAVE NO INDEMNIFICATION OBLIGATIONS NOR

LIABILITY OF ANY TYPE WITH RESPECT TO

THE SERVICES FOR THE FREE TRIAL PERIOD UNLESS SUCH EXCLUSION OF LIABILITY

IS NOT ENFORCEABLE UNDER
APPLICABLE LAW IN WHICH CASE CHEVIN’S LIABILITY WITH RESPECT TO THE

SERVICES PROVIDED DURING THE FREE TRIAL
SHALL NOT EXCEED $1,000.00. WITHOUT LIMITING THE FOREGOING, CHEVIN AND ITS

AFFILIATES AND ITS LICENSORS DO NOT
REPRESENT OR WARRANT TO CUSTOMER THAT: (A) CUSTOMER’S USE OF THE

SERVICES DURING THE FREE TRIAL PERIOD
WILL MEET CUSTOMER’S REQUIREMENTS, (B) CUSTOMER’S USE OF THE SERVICES

DURING THE FREE TRIAL PERIOD WILL BE

UNINTERRUPTED, TIMELY, SECURE OR FREE FROM ERROR, AND (C) USAGE DATA

PROVIDED DURING THE FREE TRIAL PERIOD
WILL BE ACCURATE. NOTWITHSTANDING ANYTHING TO THE CONTRARY IN THE “LIMITATION OF LIABILITY” SECTION BELOW,
CUSTOMER SHALL REVIEW THE APPLICABLE SERVICE’S DOCUMENTATION DURING

THE TRIAL PERIOD TO BECOME FAMILIAR WITH THE FEATURES AND FUNCTIONS OF THE SERVICES BEFORE MAKING A PURCHASE.

2.6 Free Services. CHEVIN may make Free Services available to Customer. Use of Free Services is subject to the terms and conditions of this Agreement. In the event of a conflict between this section and any other portion of this Agreement, this section shall control. Free Services are provided to Customer without charge up to certain limits as described in the Documentation. Usage over these limits requires Customer’s purchase of additional resources or services. Customer agrees that CHEVIN, in its sole discretion and for any or no reason, may terminate Customer’s access to the Free Services or any part thereof. Customer agrees that any termination of Customer’s access to the Free Services may be without prior notice, and Customer agrees that CHEVIN will not be liable to Customer or any third party for such termination. Customer is solely responsible for exporting Customer Data from the Free Services prior to termination of Customer’s access to the Free Services for any reason, provided that if CHEVIN terminates Customer’s account, except as required by law CHEVIN will provide Customer a reasonable opportunity
to retrieve its Customer Data. NOTWITHSTANDING THE “REPRESENTATIONS, WARRANTIES, EXCLUSIVE REMEDIES AND DISCLAIMERS” SECTION AND “INDEMNIFICATION BY CHEVIN” SECTION BELOW, THE
FREE SERVICES ARE PROVIDED “AS-IS” WITHOUT ANY WARRANTY AND CHEVIN

SHALL HAVE NO INDEMNIFICATION

ATTACHMENT A

431
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

OBLIGATIONS NOR LIABILITY OF ANY TYPE WITH RESPECT TO THE FREE SERVICES

UNLESS SUCH EXCLUSION OF LIABILITY IS
NOT ENFORCEABLE UNDER APPLICABLE LAW IN WHICH CASE CHEVIN’S LIABILITY

WITH RESPECT TO THE FREE SERVICES
SHALL NOT EXCEED $1,000.00. WITHOUT LIMITING THE FOREGOING, CHEVIN AND ITS

AFFILIATES AND ITS LICENSORS DO NOT
REPRESENT OR WARRANT TO CUSTOMER THAT: (A) CUSTOMER’S USE OF THE FREE SERVICES WILL MEET CUSTOMER’S
REQUIREMENTS, (B) CUSTOMER’S USE OF THE FREE SERVICES WILL BE

UNINTERRUPTED, TIMELY, SECURE OR FREE FROM

ERROR, AND (C) USAGE DATA PROVIDED THROUGH THE FREE SERVICES WILL BE ACCURATE.

USE OF SERVICES AND CONTENT

3.1 Subscriptions. Unless otherwise provided in the applicable Order Form or Documentation, (a) Purchased Services and access to Content are purchased as subscriptions for the term stated in the applicable Order Form or in the applicable online purchasing portal, (b) subscriptions for Purchased Services may be added during a subscription term at the same pricing as the underlying subscription pricing, prorated for the portion of that subscription term remaining at the time the subscriptions are added, and (c) any added subscriptions will terminate on the same date as the underlying subscriptions. Customer agrees that its purchases are not contingent on the delivery of any future functionality or features, or dependent on any oral or written public comments made by CHEVIN regarding future functionality or features.

3.2 Usage Limits. Services and Content may be subject to usage limits specified in Order Forms and Documentation. If Customer exceeds a contractual usage limit, CHEVIN may work with Customer to seek to reduce Customer’s usage so that it conforms to that limit. If, notwithstanding CHEVIN’s efforts, Customer is unable or unwilling to abide by a contractual usage limit, Customer will execute an Order Form for additional quantities of the applicable Services or Content promptly upon CHEVIN’s request, and/or pay any invoice for excess usage in accordance with the “Invoicing and Payment” section below.

3.3 Customer Responsibilities. Customer will (a) be responsible for Users’ compliance with this Agreement, Documentation and Order Forms, (b) be responsible for the accuracy, quality and legality of Customer Data, the means by which Customer acquired Customer Data, Customer’s use of Customer Data with the Services, and the interoperation of any Non-CHEVIN Applications with which Customer uses Services or Content, (c) use commercially reasonable efforts to prevent unauthorized access to or use of Services and Content, and notify CHEVIN promptly of any such unauthorized access or use, (d) use Services and Content only in accordance with this Agreement, Documentation, , Order Forms and applicable laws and government regulations, and (e) reserved. Any use of the Services in breach of the foregoing by Customer or Users that in CHEVIN’s judgment threatens the security of CHEVIN’s services, may result in CHEVIN’s immediate temporary suspension of the Services, however CHEVIN will use commercially reasonable efforts under the circumstances to provide Customer with notice and an opportunity to remedy such violation or threat prior to any such suspension.

3.4 Usage Restrictions. Customer will not (a) make any Service or Content available to anyone other than Customer or Users, or use any Service or Content for the benefit of anyone other than Customer or its Affiliates, unless expressly stated otherwise in an Order Form or the Documentation,

ATTACHMENT A

432
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
(b) sell, resell, license, sublicense, distribute, make available, rent or lease any Service or Content, or include any Service or Content in a service bureau or outsourcing offering, (c) use a Service or Non- CHEVIN Application to store or transmit infringing, libelous, or otherwise unlawful or tortious material, or to store or transmit material in violation of third-party privacy rights, (d) use a Service or Non-CHEVIN Application to store or transmit Malicious Code, (e) interfere with or disrupt the integrity or performance of any Service or third-party data contained therein, (f) attempt to gain unauthorized access to any Service or Content or its related systems or networks, (g) permit direct or indirect access to or use of any Services or Content in a way that circumvents a contractual usage limit, or use any Services to access or use any of CHEVIN intellectual property except as permitted under this Agreement, an Order Form, or the Documentation, (h) modify, copy, or create derivative works based on a Service or any part, feature, function or user interface thereof, (i) copy Content except as permitted herein or in an Order Form or the Documentation, (j) frame or mirror any part of any Service or Content, other than framing on Customer's own intranets or otherwise for its own internal business purposes or as permitted in the Documentation, (k) except to the extent permitted by applicable law, disassemble, reverse engineer, or decompile a Service or Content or access it to (1) build a competitive product or service, (2) build a product or service using similar ideas, features, functions or graphics of the Service, (3) copy any ideas, features, functions or graphics of the Service, or (4) determine whether the Services are within the scope of any patent.

3.5 Removal of Content and Non-CHEVIN Applications. If Customer receives notice that Content or a NonCHEVIN
Application must be removed, modified and/or disabled to avoid violating applicable law of this Agreement, Customer will promptly do so.

NON-CHEVIN PRODUCTS AND SERVICES

4.1 Non-CHEVIN Products and Services. CHEVIN or third parties may make available (for example, through a Marketplace or otherwise) third-party products or services, including, for example, Non-CHEVIN Applications and implementation and other consulting services. Any acquisition by Customer of such products or services, and any exchange of data between Customer and any Non- CHEVIN provider, product or service is solely between Customer and the applicable Non-CHEVIN provider. CHEVIN does not warrant or support Non-CHEVIN Applications or other Non-CHEVIN products or services, whether or not they are designated by CHEVIN as “certified” or otherwise, unless expressly provided otherwise in an Order Form. CHEVIN is not responsible for any disclosure, modification or deletion of Customer Data resulting from access by such Non-CHEVIN Application or its provider. By executing this agreement, the Customer does not agree to be bound by any Third-Party terms without executing an agreement in writing. The Ordering Activity acknowledges that third party software has different terms.

4.2 Integration with Non-CHEVIN Applications. The Services may contain features designed to interoperate with Non- CHEVIN Applications. CHEVIN cannot guarantee the continued availability of such Service features, and may cease providing them without entitling Customer to any refund, credit, or other compensation, if for example and without limitation, the provider of a Non-CHEVIN Application ceases to make the Non-CHEVIN Application available for interoperation with the corresponding Service features in a manner acceptable to CHEVIN. FEES AND PAYMENT

5.1 Fees. Customer will pay all fees specified in Order Forms. Except as otherwise specified herein or in an Order Form, (i) fees are based on Services and Content subscriptions purchased and not actual usage, (ii) reserved, and (iii) quantities purchased cannot be decreased during the relevant subscription term.

ATTACHMENT A

433
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

5.2 Invoicing and Payment. Customer will provide CHEVIN with a valid purchase order or alternative document reasonably acceptable to CHEVIN. If Customer provides credit card information to CHEVIN, Customer authorizes CHEVIN to charge such credit card for all Purchased Services listed in the Order Form for the initial subscription term and any renewal subscription term(s) as set forth in the “Term of Purchased Subscriptions” section below. Such charges shall be made within 30 days of the invoice receipt date, either annually or in accordance with any different billing frequency stated in the applicable Order Form. If the Order Form specifies that payment will be by a method other than a credit card, CHEVIN will invoice Customer in advance and otherwise in accordance with the relevant Order Form. Unless otherwise stated in the Order Form, invoiced fees are due net 30 days from the invoice date. Customer is responsible for providing complete and accurate billing and contact information to CHEVIN and notifying CHEVIN of any changes to such information.

5.3 Overdue Charges. If any invoiced amount is not received by CHEVIN by the due date, then without limiting CHEVIN’s rights or remedies, (a) those charges may accrue late interest at the rate at a monthly rate equal to the amount indicated by the Prompt Payment Act (31 USC 3901 et seq) and Treasury regulations at 5 CFR 1315, and/or (b) CHEVIN may condition future subscription renewals and Order Forms on payment terms shorter than those specified in the “Invoicing and Payment” section above.

5.4 Suspension of Service and Acceleration. Reserved. 5.5 Payment Disputes. CHEVIN will not exercise its rights under the “Overdue Charges” or “Suspension of Service and Acceleration” section above if Customer is disputing the applicable charges reasonably and in good faith and is cooperating diligently to resolve the dispute.

5.6 Taxes. CHEVIN's fees do not include any taxes, levies, duties or similar governmental assessments of any nature, including, for example, value-added, sales, use or withholding taxes, assessable by any jurisdiction whatsoever (collectively, “Taxes”). CHEVIN shall state separately on invoices taxes excluded from the fees, and the Customer agrees either to pay the amount of the taxes (based on the current value of the equipment) or provide evidence necessary to sustain an exemption, in accordance with FAR 52.229-1 and FAR 52.229-3..

PROPRIETARY RIGHTS AND LICENSES

6.1 Reservation of Rights. Subject to the limited rights expressly granted hereunder, CHEVIN, its Affiliates, its licensors and Content Providers reserve all of their right, title and interest in and to the Services and Content, including all of their related intellectual property rights. No rights are granted to Customer hereunder other than as expressly set forth herein.

6.2 Access to and Use of Content. Customer has the right to access and use applicable Content subject to the terms of applicable Order Forms, this Agreement and the Documentation.

6.3 License by Customer to CHEVIN. Customer grants CHEVIN, its Affiliates and applicable contractors a worldwide, limited- term license to host, copy, use, transmit, and display any Non- CHEVIN Applications and program code created by or for Customer using a Service or for use by Customer with the Services, and Customer Data, each as appropriate for CHEVIN to provide and ensure proper operation of the Services and associated systems in accordance with this Agreement. If Customer chooses to use a NonCHEVIN Application with a Service, Customer grants CHEVIN permission to allow the Non-CHEVIN Application and its provider to access Customer Data and information about Customer’s usage of the Non-CHEVIN
Application as appropriate for the interoperation of that Non-CHEVIN Application with the Service.

Subject to the limited licenses granted herein, CHEVIN acquires no right, title or interest from Customer or its licensors under this Agreement in or to any Customer Data, Non-CHEVIN Application or such program code.

ATTACHMENT A

434
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us

6.4 License by Customer to Use Feedback. Customer grants to CHEVIN and its Affiliates a worldwide, perpetual, irrevocable, royalty-free license to use and incorporate into its services any suggestion, enhancement request, recommendation, correction or other feedback provided by Customer or Users relating to the operation of CHEVIN’s or its Affiliates’ services.

6.5 Federal Government End Use Provisions. CHEVIN provides the Services, including related software and technology, for ultimate federal government end use in accordance with the following:

The Services consist of “commercial items,” as defined at FAR 2.101. In accordance with FAR 12.211-

12.212 and DFARS 227.7102-4, as applicable, the rights of the U.S. Government to use, modify, reproduce, release, perform, display, or disclose commercial computer software, commercial computer software documentation, and technical data furnished in connection with the Services shall be as provided in this Agreement, except that, for U.S. Department of Defense end users, technical data customarily provided to the public is furnished in accordance with DFARS 252.227-7015. If a government agency needs additional rights, it must negotiate a mutually acceptable written addendum to this Agreement specifically granting those rights.

CONFIDENTIALITY

7.1 Definition of Confidential Information. “Confidential Information” means all information disclosed by a party (“Disclosing Party”) to the other party (“Receiving Party”), whether orally or in writing, that is designated as confidential or that reasonably should be understood to be confidential given the nature of the information and the circumstances of disclosure. Confidential Information of Customer includes Customer Data; Confidential Information of CHEVIN includes the Services and Content. Confidential Information of each party includes business and marketing plans, technology and technical information, product plans and designs, and business processes disclosed by such party.

However, Confidential Information does not include any information that (i) is or becomes generally known to the public without breach of any obligation owed to the Disclosing Party, (ii) was known to the Receiving Party prior to its disclosure by the Disclosing Party without breach of any obligation owed to the Disclosing Party, (iii) is received from a third party without breach of any obligation owed to the Disclosing Party, or (iv) was independently developed by the Receiving Party. For the avoidance of doubt, the non-disclosure obligations set forth in this “Confidentiality” section apply to Confidential Information exchanged between the parties in connection with the evaluation of additional CHEVIN services. CHEVIN recognizes that Federal agencies are subject to the Freedom of Information Act, 5 U.S.C. 552, which requires that certain information be released, despite being characterized as “confidential” by the vendor. When the end user is the Federal Government, neither this Agreement nor the pricing terms are confidential information notwithstanding any such markings.

7.2 Protection of Confidential Information. As between the parties, each party retains all ownership rights in and to its Confidential Information. The Receiving Party will use the same degree of care that it uses to protect the confidentiality of its own confidential information of like kind (but not less than reasonable care) to (i) not use any Confidential Information of the Disclosing Party for any purpose outside the scope of this Agreement and (ii) except as otherwise authorized by the Disclosing Party in writing, limit access to Confidential Information of the Disclosing Party to those of its and its Affiliates’ employees and contractors who need that access for purposes consistent with this Agreement and who have signed confidentiality agreements with the Receiving Party containing protections not materially less protective of the Confidential Information than those herein.

7.3 Compelled Disclosure. The Receiving Party may disclose Confidential Information of the Disclosing Party to the extent compelled by law to do so, provided the Receiving Party gives the Disclosing Party prior notice of the compelled disclosure (to the extent legally permitted) and reasonable assistance, at the Disclosing Party's cost, if the Disclosing Party wishes to contest the

ATTACHMENT A

435
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
disclosure. If the Receiving Party is compelled by law to disclose the Disclosing Party’s Confidential Information as part of a civil proceeding to which the Disclosing Party is a party, and the Disclosing Party is not contesting the disclosure, the Disclosing Party will reimburse the Receiving Party for its reasonable cost of compiling and providing secure access to that Confidential Information.

REPRESENTATIONS, WARRANTIES, EXCLUSIVE REMEDIES AND DISCLAIMERS

8.1 Representations. Each party represents that it has validly entered into this Agreement and has the legal power to do so. 8.2 CHEVIN Warranties. CHEVIN warrants that during an applicable subscription term (a) this Agreement, the Order Forms and the Documentation will accurately describe the applicable administrative, physical, and technical safeguards for protection of the security, confidentiality and integrity of Customer Data, (b) CHEVIN will not materially decrease the overall security of the Services, (c) the Services will perform materially in accordance with the applicable Documentation, and (d) subject to the “Integration with Non-CHEVIN Applications” section above, CHEVIN will not materially decrease the overall functionality of the Services. For any breach of a warranty above, Customer’s exclusive remedies are those described in the “Termination” and “Refund or Payment upon Termination” sections below.

8.3 Disclaimers. EXCEPT AS EXPRESSLY PROVIDED HEREIN, NEITHER PARTY MAKES

ANY WARRANTY OF ANY KIND, WHETHER

EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, AND EACH PARTY SPECIFICALLY

DISCLAIMS ALL IMPLIED WARRANTIES,

INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE OR NON-INFRINGEMENT, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. CONTENT AND BETA SERVICES ARE PROVIDED “AS IS,” AND AS AVAILABLE EXCLUSIVE OF ANY WARRANTY WHATSOEVER. THIS

AGREEMENT DOES NOT LIMIT OR DISCLAIM ANY OF THE WARRANTIES SPECIFIED IN THE GSA MULTIPLE AWARD SCHEDULE CONTRACT UNDER FAR 52.212-4(O). IN THE EVENT OF A BREACH OF WARRANTY, THE U.S. GOVERNMENT RESERVES ALL RIGHTS

AND REMEDIES UNDER THE CONTRACT, THE FEDERAL ACQUISITION REGULATIONS, AND THE CONTRACT DISPUTES ACT, 41 U.S.C. 7101-7109.

MUTUAL INDEMNIFICATION

9.1 Indemnification by CHEVIN. CHEVIN has the right to intervene to defend Customer against any claim, demand, suit or proceeding made or brought against Customer by a third party alleging that any Purchased Service infringes or misappropriates such third party’s intellectual property rights (a “Claim Against Customer”), and has the right to intervene to indemnify Customer from any damages, attorney fees and costs finally awarded against Customer as a result of, or for amounts paid by Customer under a settlement approved by CHEVIN in writing of, a Claim Against Customer, provided Customer (a) promptly gives CHEVIN written notice of the Claim Against Customer, (b) gives CHEVIN control of the defense and settlement of the Claim Against Customer (except that
CHEVIN may not settle any Claim Against Customer unless it unconditionally releases Customer of all liability), and (c) gives
CHEVIN all reasonable assistance, at CHEVIN’s expense. If CHEVIN receives information about an infringement or misappropriation claim related to a Service, CHEVIN may in its discretion and at no cost to Customer (i) modify the Services so that they are no longer claimed to infringe or misappropriate, without breaching CHEVIN’s warranties under “CHEVIN Warranties” above, (ii) obtain a license for Customer’s continued use of that Service in accordance with this Agreement, or (iii) terminate Customer’s subscriptions for that Service upon 30 days’ written notice and refund

ATTACHMENT A

436
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
Customer any prepaid fees covering the remainder of the term of the terminated subscriptions. The above defense and indemnification obligations do not apply if (1) the allegation does not state with specificity that the Services are the basis of the Claim Against Customer; (2) a Claim Against Customer arises from the use or combination of the Services or any part thereof with software, hardware, data, or processes not provided by CHEVIN, if the Services or use thereof would not infringe without such combination; (3) a Claim Against Customer arises from Services under an Order Form for which there is no charge; or (4) a Claim against Customer arises from Content, a Non-CHEVIN Application or Customer’s breach of this Agreement, the Documentation or applicable Order Forms. Nothing contained herein shall be construed in derogation of the U.S. Department of Justice’s right to defend any claim or action brought against the U.S., pursuant to its jurisdictional statute 28 U.S.C. §516.

9.2 Indemnification by Customer. Reserved.

9.3 Exclusive Remedy. This “Mutual Indemnification” section states the indemnifying party’s sole liability to, and the indemnified party’s exclusive remedy against, the other party for any third party claim described in this section.

LIMITATION OF LIABILITY

10.1 Limitation of Liability. IN NO EVENT SHALL THE AGGREGATE LIABILITY OF EACH

PARTY TOGETHER

WITH ALL OF ITS AFFILIATES ARISING OUT OF OR RELATED TO THIS AGREEMENT

EXCEED THE AMOUNT PAID BY LICENSEE TO CHEVIN FOR SOFTWARE,

DOCUMENTATION OR SERVICES PURSUANT TO THE PURCHASE ORDER(S) GIVING RISE TO THE CLAIM . THE FOREGOING LIMITATION WILL APPLY WHETHER AN ACTION IS IN

CONTRACT OR TORT AND REGARDLESS OF THE THEORY OF LIABILITY, BUT WILL NOT LIMIT CUSTOMER'S AND ITS AFFILIATES’ PAYMENT OBLIGATIONS UNDER THE “FEES AND PAYMENT” SECTION ABOVE. THIS AGREEMENT SHALL NOT IMPAIR THE U.S.

GOVERNMENT’S RIGHT TO RECOVER FOR FRAUD OR CRIMES ARISING OUT OF OR

RELATED TO THIS CONTRACT UNDER ANY FEDERAL FRAUD STATUTE, INCLUDING THE FALSE CLAIMS ACT, 31 U.S.C. 3729-3733. FURTHERMORE, THIS CLAUSE SHALL NOT IMPAIR NOR PREJUDICE THE U.S. GOVERNMENT’S RIGHT TO EXPRESS REMEDIES PROVIDED IN THE GSA SCHEDULE CONTRACT (E.G., CLAUSE 552.238-81 – PRICE REDUCTIONS, CLAUSE 52.212-4(H) – PATENT INDEMNIFICATION, AND GSAR 552.215-72 – PRICE ADJUSTMENT – FAILURE TO PROVIDE ACCURATE INFORMATION).

10.2 Exclusion of Consequential and Related Damages. IN NO EVENT WILL EITHER

PARTY OR ITS AFFILIATES HAVE ANY

LIABILITY ARISING OUT OF OR RELATED TO THIS AGREEMENT FOR ANY LOST

PROFITS, REVENUES, GOODWILL, OR INDIRECT, SPECIAL, INCIDENTAL,

CONSEQUENTIAL, COVER, BUSINESS INTERRUPTION OR PUNITIVE DAMAGES,

WHETHER AN ACTION IS

IN CONTRACT OR TORT AND REGARDLESS OF THE THEORY OF LIABILITY, EVEN IF

A PARTY OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR IF A PARTY’S OR ITS AFFILIATES’ REMEDY OTHERWISE FAILS OF ITS ESSENTIAL PURPOSE. THE FOREGOING DISCLAIMER WILL NOT APPLY TO THE EXTENT PROHIBITED BY LAW. TERM AND TERMINATION

11.1 Term of Agreement. This Agreement commences on the date Customer first accepts it and continues until all subscriptions hereunder have expired or have been terminated.

11.2 Term of Purchased Subscriptions. The term of each subscription shall be as specified in the applicable Order Form. Except as otherwise specified in an Order Form, subscriptions will renew

ATTACHMENT A

437
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
for additional periods equal to the expiring subscription term or one year (whichever is shorter) when agreed upon by both parties in writing. Except as expressly provided in the applicable Order Form, renewal of promotional or one-time priced subscriptions will be at CHEVIN’s applicable list price in effect at the time of the applicable renewal. Notwithstanding anything to the contrary, any renewal in which subscription volume or subscription length for any Services has decreased from the prior term will result in re-pricing at renewal without regard to the prior term’s per-unit pricing.

11.3 Termination. Customer may terminate this Agreement for cause (i) upon 30 days written notice to CHEVIN of a material breach if such breach remains uncured at the expiration of such period, or (ii) if CHEVIN becomes the subject of a petition in bankruptcy or any other proceeding relating to insolvency, receivership, liquidation or assignment for the benefit of creditors. When the End User is an instrumentality of the U.S., recourse against the United States for any alleged breach of this Agreement must be brought as a dispute under the contract Disputes Clause (Contract Disputes Act). During any dispute under the Disputes Clause, CHEVIN shall proceed diligently with performance of this Agreement, pending final resolution of any request for relief, claim, appeal, or action arising under the Agreement, and comply with any decision of the Contracting Officer.

11.4 Refund or Payment upon Termination. If this Agreement is terminated by Customer in accordance with the
“Termination” section above, CHEVIN will refund Customer any prepaid fees covering the remainder of the term of all Order Forms after the effective date of termination. If this Agreement is terminated by CHEVIN in accordance with the “Termination” section above, Customer will comply with any decision of the Contracting Officer. In no event will termination relieve Customer of its obligation to pay any fees payable to CHEVIN for the period prior to the effective date of termination.

11.5 Surviving Provisions. The sections titled “Free Services,” “Fees and Payment,” “Proprietary Rights and Licenses,”
“Confidentiality,” “Disclaimers,” “Mutual Indemnification,” “Limitation of Liability,” “Refund or Payment upon Termination,” “Removal of Content and Non-CHEVIN Applications,” “Surviving Provisions” and “General Provisions” will survive any termination or expiration of this Agreement, and the section titled “Protection of Customer Data” will survive any termination or expiration of this Agreement for so long as CHEVIN retains possession of Customer Data.

GENERAL PROVISIONS

12.1 Export Compliance. The Services, Content, other CHEVIN technology, and derivatives thereof may be subject to export laws and regulations of the United States and other jurisdictions. CHEVIN and Customer each represents that it is not named on any U.S. government denied-party list. Customer will not permit any User to access or use any Service or Content in a U.S.- embargoed country or region (currently Cuba, Iran, North Korea, Sudan, Syria or Crimea) or in violation of any U.S. export law or regulation.

12.2 Anti-Corruption. Neither party has received or been offered any illegal or improper bribe, kickback, payment, gift, or thing of value from an employee or agent of the other party in connection with this Agreement. Reasonable gifts and entertainment provided in the ordinary course of business do not violate the above restriction.

12.3 Entire Agreement and Order of Precedence. This Agreement, together with the underlying GSA Schedule Contract, Schedule Pricelist, and Purchase Order(s), is the entire agreement between CHEVIN and Customer regarding Customer’s use of Services and Content and supersedes all prior and contemporaneous agreements, proposals or representations, written or oral, concerning its subject matter. In the event of any conflict or inconsistency among the following documents, the order of precedence shall be: (1) the applicable Order Form, (2) this Agreement, and (3) the Documentation.

ATTACHMENT A

438
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
Titles and headings of sections of this Agreement are for convenience only and shall not affect the construction of any provision of this Agreement.

12.4 Relationship of the Parties. The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, fiduciary or employment relationship between the parties. Each party will be solely responsible for payment of all compensation owed to its employees, as well as all employment-related taxes.

12.5 Third-Party Beneficiaries. There are no third-party beneficiaries under this Agreement.

12.6 Waiver. No failure or delay by either party in exercising any right under this Agreement will constitute a waiver of that right.

12.7 Severability. If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision will be deemed null and void, and the remaining provisions of this Agreement will remain in effect.

12.8 Assignment. Neither party may assign any of its rights or obligations hereunder, whether by operation of law or otherwise, without the other party’s prior written consent (not to be unreasonably withheld). Notwithstanding the foregoing, if CHEVIN is acquired by, sells substantially all of its assets to, or undergoes a change of control in favor of ,a direct competitor of the other party, then such other party may terminate this Agreement upon written notice. In the event of such a termination, CHEVIN will refund Customer any prepaid fees covering the remainder of the term of all subscriptions for the period after the effective date of such termination. Subject to the foregoing, this Agreement will bind and inure to the benefit of the parties, their respective successors and permitted assigns.

12.9 CHEVIN Contracting Entity, Notices, Governing Law, and Venue. The CHEVIN entity entering into this Agreement, the address to which Customer should direct notices under this Agreement, the law that will apply in any dispute or lawsuit arising out of or in connection with this Agreement, and the courts that have jurisdiction over any such dispute or lawsuit, depend on where Customer is domiciled.

If Customer is
domiciled in:

The CHEVIN entity
entering into this
Agreement is:

Notices should
be addressed
to:

Governing law is: Courts with
exclusive
jurisdiction
are:

The United States of
America, Canada,
Mexico or
a Country in
Central or South
America or the
Caribbean
Chevin Fleet
Solutions LLC, a
Delaware corporation
Chevin Fleet
Solutions,
347 Lunenburg St,
Fitchburg, MA 01420
United
States Federal
Law
Venue
mandated by
applicable
Federal law
Australia or New
Zealand
Chevin Fleet
Solutions Pty Ltd
Unit 55, 117 Old
Pittwater Road
Brookvale,
NSW 2100,
Australia
Queensland,
Australia
Queensland,
Australia

ATTACHMENT A

439
Chevin Fleet Solutions LLC
881 Main St. PO Box 2203
Fitchburg, MA 01420
[email protected]
(978) 540-9970
www.chevinfleet.com/en-us
Belgium,
Netherlands or
Luxembourg
Chevin Fleet
Solutions bvba
Elisabethlaan, 2
B-2600 Berchem,
Belgium
Belgian Law Brussels,
Belgium
France Sarl Chevin 27 Avenue Du Savoy
74400 Chamonix-
Mont
Blanc, France
France Lyon, France
The United
Kingdom, or a
Country not
listed above
Chevin Computer
Systems Limited,
trading as Chevin
Fleet
Solutions
Chevin Fleet Solutions
Limited, The Old
School
House, Chapel Street,
Belper, Derbyshire,
DE56
1AR
English Law London,
England

12.10 Manner of Giving Notice. Except as otherwise specified in this Agreement, all notices related to this Agreement will be in writing and will be effective upon (a) personal delivery, (b) the second business day after mailing, or (c), except for notices of termination or an indemnifiable claim (“Legal Notices”), which shall clearly be identifiable as Legal Notices, the day of sending by email.

Billing-related notices to Customer will be addressed to the relevant billing contact designated by Customer. All other notices to Customer will be addressed to the relevant Services system administrator designated by Customer.

12.11 Agreement to Governing Law and Jurisdiction. Each party agrees to the applicable governing law above without regard to choice or conflicts of law rules, and to the exclusive jurisdiction of the applicable courts above.

ATTACHMENT A

440
Contract Clause Document
for
Solicitation Number : 47QSMD20R0001
Refresh Number : 30
Contract Number : 47QTCA25D00DR
Created on December 1, 2025

ATTACHMENT A

441

TABLE OF CONTENTS
Contract Clauses

52.203-3 - GRATUITIES (APR 1984)......................................................................................................... 1

52.222-1 - NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (FEB 1997)................................ 1

52.222-3 - CONVICT LABOR (JUN 2003)................................................................................................. 1

52.224-1 - PRIVACY ACT NOTIFICATION (APR 1984)...........................................................................2

52.224-2 - PRIVACY ACT (APR 1984)....................................................................................................... 2

52.228-5 - INSURANCE - WORK ON A GOVERNMENT INSTALLATION (JAN 1997).......................... 3

52.229-1 - STATE AND LOCAL TAXES (APR 1984)................................................................................. 3

52.232-37 - MULTIPLE PAYMENT ARRANGEMENTS (MAY 1999)....................................................... 3

52.237-2 - PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)............................................................................................................................................................3

52.237-3 - CONTINUITY OF SERVICES (JAN 1991)................................................................................3

52.242-13 - BANKRUPTCY (JUL 1995).....................................................................................................4

52.242-15 - STOP-WORK ORDER (AUG 1989)........................................................................................ 4

52.247-32 - F.O.B. ORIGIN, FREIGHT PREPAID (FEB 2006)................................................................5

52.247-34 - F.O.B. DESTINATION (NOV 1991)........................................................................................6

52.247-38 - F.O.B. INLAND CARRIER, POINT OF EXPORTATION (FEB 2006)...................................7

52.247-39 - F.O.B. INLAND POINT, COUNTRY OF IMPORTATION (APR 1984)................................. 8

52.247-68 - REPORT OF SHIPMENT (REPSHIP) (FEB 2006)................................................................ 8 552.203-71 - RESTRICTION ON ADVERTISING (SEP 1999).................................................................. 9 552.211-73 - MARKING (FEB 1996)..........................................................................................................9 552.211-75 - PRESERVATION, PACKAGING, AND PACKING (FEB 1996) (ALTERNATE I - MAY 2003)............................................................................................................................................................9 552.211-77 - PACKING LIST (FEB 1996) (ALTERNATE I - MAY 2003)................................................10 552.223-70 - HAZARDOUS SUBSTANCES (MAY 1989).........................................................................10 552.223-71 - NONCONFORMING HAZARDOUS MATERIALS (SEP 1999)......................................... 10 552.229-70 - FEDERAL, STATE, AND LOCAL TAXES (APR 1984).......................................................10 552.229-71 - FEDERAL EXCISE TAX - C GOVERNMENT (SEP 1999).................................................11 552.232-23 - ASSIGNMENT OF CLAIMS (SEP 1999)............................................................................ 11

52.252-2 - CLAUSES INCORPORATED BY REFERENCE (FEB 1998).................................................11

52.217-8 - OPTION TO EXTEND SERVICES (NOV 1999)..................................................................... 13

52.246-4 - INSPECTION OF SERVICES - FIXED-PRICE (AUG 1996) (DEVIATION I - MAY 2003).. 14

52.223-9 - ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA-DESIGNATED ITEMS (MAY 2008)................................................................................................. 14 552.246-78 - INSPECTION AT DESTINATION (JUL 2009)................................................................... 15

52.217-9 - OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)................................15

52.222-40 - NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS ACT (DEC 2010)....................................................................................................................................... 15

52.204-9 - PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011).... 16

52.245-9 - USE AND CHARGES (APR 2012).......................................................................................... 17

52.216-19 - ORDER LIMITATIONS (OCT 1995).....................................................................................19

52.222-42 - STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 2014)..................19

52.222-49 - SERVICE CONTRACT LABOR STANDARDS - PLACE OF PERFORMANCE UNKNOWN (MAY 2014)............................................................................................................................................... 20

52.222-51 - EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR

STANDARDS TO CONTRACTS FOR MAINTENANCE, CALIBRATION, OR REPAIR OF CERTAIN EQUIPMENT - REQUIREMENTS (MAY 2014).......................................................................................20

52.227-14 - RIGHTS IN DATA - GENERAL (MAY 2014)........................................................................ 21

52.232-17 - INTEREST (MAY 2014) (DEVIATION I - MAY 2003)..........................................................25

52.204-19 - INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)............................................................................................................................................... 26

ATTACHMENT A

442
552.223-73 - PRESERVATION, PACKAGING, PACKING, MARKING AND LABELING OF HAZARDOUS MATERIALS (HAZMAT) FOR SHIPMENTS (JUN 2015)................................................26 552.228-5 - GOVERNMENT AS ADDITIONAL INSURED (JAN 2016)..................................................27 552.211-89 - NON-MANUFACTURED WOOD PACKAGING MATERIAL FOR EXPORT (JUL 2016)27

52.224-3 - PRIVACY TRAINING (JAN 2017)...........................................................................................28

52.242-5 - PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (JAN 2017)................................ 29

52.222-41 - SERVICE CONTRACT LABOR STANDARDS (AUG 2018)................................................. 29

52.222-43 - FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT LABOR STANDARDSâ??PRICE ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS) (AUG 2018)..........................................................................................................................................................35

52.232-33 - PAYMENT BY ELECTRONIC FUNDS TRANSFER - SYSTEM FOR AWARD MANAGEMENT (OCT 2018)....................................................................................................................36 552.238-107 - TRAFFIC RELEASE (SUPPLIES) (MAY 2019)................................................................37 552.238-86 - DELIVERY SCHEDULE (MAY 2019).................................................................................37 552.238-89 - DELIVERIES TO THE U.S. POSTAL SERVICE (MAY 2019)............................................ 38 552.238-90 - CHARACTERISTICS OF ELECTRIC CURRENT (MAY 2019)..........................................38 552.238-91 - MARKING AND DOCUMENTATION REQUIREMENTS FOR SHIPPING (MAY 2019). 39 552.238-92 - VENDOR MANAGED INVENTORY (VMI) PROGRAM (MAY 2019)................................39 552.238-93 - ORDER ACKNOWLEDGMENT (MAY 2019).....................................................................39 552.238-94 - ACCELERATED DELIVERY REQUIREMENTS (MAY 2019)........................................... 39 552.238-95 - SEPARATE CHARGE FOR PERFORMANCE ORIENTED PACKAGING (POP) (MAY 2019)..........................................................................................................................................................40 552.238-96 - SEPARATE CHARGE FOR DELIVERY WITHIN CONSIGNEE'S PREMISES (MAY 2019)..........................................................................................................................................................40 552.238-100 - TRANSSHIPMENTS (MAY 2019)......................................................................................41 552.238-101 - FOREIGN TAXES AND DUTIES (MAY 2019)................................................................. 41 552.238-102 - ENGLISH LANGUAGE AND U.S. DOLLAR REQUIREMENTS (MAY 2019).................41 552.238-103 - ELECTRONIC COMMERCE (MAY 2019)....................................................................... 42 552.238-104 - DISSEMINATION OF INFORMATION BY CONTRACTOR (MAY 2019).......................43 552.238-106 - INTERPRETATION OF CONTRACT REQUIREMENTS (MAY 2019)............................ 43 552.238-70 - COVER PAGE FOR WORLDWIDE FEDERAL SUPPLY SCHEDULES (MAY 2019) FOR ALL GEOGRAPHIC AREAS..................................................................................................................... 43 552.238-79 - CANCELLATION (MAY 2019)............................................................................................43 552.238-81 - PRICE REDUCTIONS (MAY 2019) ...................................................................................43 552.238-81 - PRICE REDUCTIONS (MAY 2019) (ALTERNATE I - APR 2014).....................................44 552.238-83 - EXAMINATION OF RECORDS BY GSA (MAY 2019)....................................................... 45 552.238-84 - DISCOUNTS FOR PROMPT PAYMENT (MAY 2019).......................................................45 552.238-85 - CONTRACTOR'S BILLING RESPONSIBILITIES (MAY 2019)..........................................46 552.238-87 - DELIVERY PRICES (MAY 2019)........................................................................................46 552.238-97 - PARTS AND SERVICE (MAY 2019)................................................................................... 47 552.238-98 - CLAUSES FOR OVERSEAS COVERAGE (MAY 2019)..................................................... 47 552.238-99 - DELIVERY PRICES OVERSEAS (MAY 2019)....................................................................48

52.216-32 - TASK-ORDER AND DELIVERY-ORDER OMBUDSMAN (SEP 2019) (ALT I SEP 2019) Alternate I..................................................................................................................................................48

52.219-13 - NOTICE OF SET-ASIDE OF ORDERS (MAR 2020)........................................................... 49 552.238-77 - SUBMISSION AND DISTRIBUTION OF AUTHORIZED FEDERAL SUPPLY SCHEDULE PRICE LISTS (MAR 2020)........................................................................................................................ 49

52.202-1 - DEFINITIONS (JUN 2020)..................................................................................................... 50

52.225-19 - CONTRACTOR PERSONNEL IN A DESIGNATED OPERATIONAL AREA OR

SUPPORTING A DIPLOMATIC OR CONSULAR MISSION OUTSIDE THE UNITED STATES (MAY 2020)..........................................................................................................................................................50

52.216-18 - ORDERING (AUG 2020)...................................................................................................... 55

52.228-3 - WORKER’S COMPENSATION INSURANCE (DEFENSE BASE ACT) (JUL 2014)............. 56 552.238-80 - INDUSTRIAL FUNDING FEE AND SALES REPORTING (JUL 2020)............................ 56 552.252-6 - AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2021) (DEVIATION FAR 52.252-6)....58

52.245-1 - GOVERNMENT PROPERTY (SEP 2021)...............................................................................58

52.203-13 - CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (NOV 2021).................69 552.238-111 - ENVIRONMENTAL PROTECTION AGENCY REGISTRATION REQUIREMENT (JAN 2022)..........................................................................................................................................................72 552.238-82 - MODIFICATIONS (FEDERAL SUPPLY SCHEDULE) (JAN 2022) (ALTERNATE I - MAR

ATTACHMENT A

443
2020)..........................................................................................................................................................73 552.238-82 - MODIFICATIONS (FEDERAL SUPPLY SCHEDULE) (JAN 2022) (ALTERNATE II MAY 2019)..........................................................................................................................................................74 552.238-78 - IDENTIFICATION OF PRODUCTS THAT HAVE ENVIRONMENTAL ATTRIBUTES (JAN 2022)..........................................................................................................................................................75

52.203-6 - RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020) (ALTERNATE I - NOV 2021).................................................................................................................... 77

52.222-62 - PAID SICK LEAVE UNDER EXECUTIVE ORDER 13706 (JAN 2022).............................. 77 552.238-116 - OPTION TO EXTEND THE TERM OF THE FSS CONTRACT (MAR 2022).................. 82 552.238-73 - IDENTIFICATION OF ELECTRONIC OFFICE EQUIPMENT PROVIDING ACCESSIBILITY FOR INDIVIDUALS WITH DISABILITIES (MAR 2022).............................................82 552.238-199 - SPECIAL ORDERING PROCEDURES APPLICABLE WHEN PROCURING CLOUD COMPUTING ON A CONSUMPTION BASIS (MAR 2022).....................................................................83 C-FSS-370 - CONTRACTOR TASKS / SPECIAL REQUIREMENTS (DEC 2022).................................. 85 I-FSS-40 - CONTRACTOR TEAM ARRANGEMENTS (DEC 2022)........................................................ 86 G-FSS-900-C - CONTACT FOR CONTRACT ADMINISTRATION (DEC 2022).................................... 86 I-FSS-106 - GUARANTEED MINIMUM (DEC 2022)..............................................................................87

52.232-40 - PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (MAR 2023)............................................................................................................................................... 87 552.238-81 - PRICE REDUCTIONS (DEC 2021) (DEVIATION)............................................................87 552.219-74 - SECTION 8(A) DIRECT AWARD (SEP 1999)....................................................................88 552.238-117 - PRICE ADJUSTMENT - FAILURE TO PROVIDE ACCURATE INFORMATION (OCT 2023)..........................................................................................................................................................89 I-FSS-639 - CONTRACT SALES CRITERIA (SEP 2023)......................................................................... 89 552.212-71 - CONTRACT TERMS AND CONDITIONS APPLICABLE TO GSA ACQUISITIONS OF COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2023).........................................90 552.212-72 - CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS APPLICABLE TO GSA ACQUISITION OF COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2023).................................................................................................. 90

52.225-5 - TRADE AGREEMENTS (NOV 2023)......................................................................................91 552.212-4 - CONTRACT TERMS AND CONDITIONS - COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEVIATION FAR 52.212-4) (JAN 2023)...................................................93

52.203-17 - CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (NOV 2023)............................................... 101 552.238-105 - DELIVERIES BEYOND THE CONTRACTUAL PERIOD - PLACING OF ORDERS (MAR 2024)........................................................................................................................................................101 552.238-112 - DEFINITIONS - FEDERAL SUPPLY SCHEDULE CONTRACTS (MAR 2024)............101 552.238-113 - AUTHORITIES SUPPORTING USE OF FEDERAL SUPPLY SCHEDULE CONTRACTS (MAR 2024)............................................................................................................................................. 102 552.238-114 - USE OF FEDERAL SUPPLY SCHEDULE CONTRACTS BY NON-FEDERAL ENTITIES (MAR 2024)............................................................................................................................................. 103

52.223-5 - POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2024)....... 104

52.226-8 - ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (MAY 2024)............................................................................................................................ 105

52.204-27 - PROHIBTION ON A BYTEDANCE COVERED APPLICATION (JUN 2023)................... 105 552.238-80 - INDUSTRIAL FUNDING FEE AND SALES REPORTING (JUL 2020) ALTERNATE I (MAY 2024) (DEVIATION)..................................................................................................................... 106 552.238-88 - GSA ADVANTAGE!® (JUL 2024).................................................................................... 109 552.219-18 - NOTIFICATION OF COMPETITION LIMITED TO ELIGIBLE 8(a) PARTICIPANTS (MAY 2024) (DEVIATION FAR 52.219-18)........................................................................................... 109 552.212-4 - CONTRACT TERMS AND CONDITIONS - COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (ALTERNATE I NOV 2021) (DEVIATION FAR 52.212-4) (JAN 2023) .. 110 552.238-119 - SINGLE-USE PLASTIC (SUP) FREE PACKAGING AVAILABILITY (JUL 2024)........122 I-FSS-600 - CONTRACT PRICE LISTS (DEC 2022)............................................................................. 123 552.238-120 - Economic Price Adjustment - Federal Supply Schedule Contracts (SEP 2024)............. 126 I-FSS-644 - PRODUCTS OFFERED AND SOLD BY VENDORS OTHER THAN THE MANUFACTURER (NOV 2025)............................................................................................................. 127

52.209-6 - PROTECTING THE GOVERNMENTS INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR VOLUNTARILY EXCLUDED (JAN 2025) (DEVIATION - NOV 2025)............................................................................128

52.223-2 - REPORTING OF BIOBASED PRODUCTS UNDER SERVICE AND CONSTRUCTION

ATTACHMENT A

444
CONTRACTS (MAY 2024) (DEVIATION NOV 2025)............................................................................129

52.204-7 - SYSTEM FOR AWARD MANAGEMENT (NOV 2024) (DEVIATION - NOV 2025).............130

52.247-64 - PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG COMMERCIAL VESSELS (NOV 2021) (DEVIATION - NOV 2025)........................................................................................................... 132

52.222-54 - EMPLOYMENT ELIGIBILITY VERIFICATION (JAN 2025) (DEVIATION - NOV 2025) 134

52.222-53 - EXEMPTION FROM APPLICATION OF THE SERVICE CONTRACT LABOR STANDARDS TO CONTRACTS FOR CERTAIN SERVICES - REQUIREMENTS (MAY 2014) (DEVIATION - NOV 2025)..................................................................................................................... 138

52.222-50 - COMBATING TRAFFICKING IN PERSONS (OCT 2025) (DEVIATION - NOV 2025)....139

52.222-37 - EMPLOYMENT REPORTS ON VETERANS (JUN 2020) (DEVIATION - NOV 2025)......148

52.222-36 - EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020) (DEVIATION - NOV 2025)............................................................................................................................................ 149

52.222-35 - EQUAL OPPORTUNITY FOR VETERANS (JUN 2020) (DEVIATION - NOV 2025)....... 150

52.222-19 - CHILD LABOR-COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2025) (DEVIATION - NOV 2025)..................................................................................................................... 150

52.204-13 - SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) (DEVIATION - NOV 2025)........................................................................................................................................................151

52.233-4 - APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) (DEVIATION - NOV 2025)...............................................................................................................................................153

52.233-3 - PROTEST AFTER AWARD (AUG 1996) (DEVIATION - NOV 2025)..................................153

52.233-1 - DISPUTES (MAY 2014) (DEVIATION - NOV 2025)............................................................154

52.223-7 - NOTICE OF RADIOACTIVE MATERIALS (JAN 1997) (DEVIATION - NOV 2025).......... 156

52.223-3 - HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (FEB 2021) (ALTERNATE I - JUL 1995) (DEVIATION - NOV 2025).......................................................................157

52.219-9 - SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2025) (ALT II NOV 2016) (DEVIATION - NOV 2025)..................................................................................................................... 159

52.219-8 - UTILIZATION OF SMALL BUSINESS CONCERNS (JAN 2025) (DEVIATION - NOV 2025)........................................................................................................................................................171

52.219-6 - NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2020) (DEVIATION - NOV 2025)........................................................................................................................................................173

52.219-33 - NONMANUFACTURER RULE (SEP 2021) (DEVIATION - NOV 2025)...........................174

52.219-30 - NOTICE OF SET-ASIDE FOR, OR SOLE SOURCE AWARD TO, WOMEN-OWNED

SMALL BUSINESS CONCERNS ELIGIBLE UNDER THE WOMEN-OWNED SMALL BUSINESS PROGRAM (OCT 2022) (DEVIATION - NOV 2025)............................................................................. 175

52.219-3 - NOTICE OF HUBZONE SET-ASIDE OR SOLE SOURCE AWARD (OCT 2022) (DEVIATION - NOV 2025)..................................................................................................................... 176

52.219-29 - NOTICE OF SET-ASIDE FOR, OR SOLE SOURCE AWARD TO, ECONOMICALLY DISADVANTAGED WOMEN-OWNED SMALL BUSINESS CONCERNS (OCT 2022) (DEVIATION - NOV 2025)...............................................................................................................................................176

52.219-28 - POST-AWARD SMALL BUSINESS PROGRAM REPRESENTATION (JAN 2025) (DEVIATION - NOV 2025)..................................................................................................................... 177

52.219-27 - NOTICE OF SET-ASIDE FOR, OR SOLE-SOURCE AWARD TO, SERVICE-DISABLED

VETERAN-OWNED SMALL BUSINESS (SDVOSB) CONCERNS ELIGIBLE UNDER THE SDVOSB PROGRAM (FEB 2024) (DEVIATION - NOV 2025)............................................................................. 179

52.219-16 - LIQUIDATED DAMAGES - SUBCONTRACTING PLAN (SEP 2021) (DEVIATION - NOV 2025)........................................................................................................................................................181

52.219-14 - LIMITATIONS ON SUBCONTRACTING (OCT 2022) (DEVIATION - NOV 2025).......... 181

52.215-21 - REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER THAN CERTIFIED COST OR PRICING DATA - MODIFICATIONS (NOV 2021) (ALTERNATE IV - OCT 2010) (DEVIATION - NOV 2025).................................................................................................. 183

52.209-10 - PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (NOV 2015) (DEVIATION - NOV 2025).................................................................................................183

52.204-15 - SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-DELIVERY CONTRACTS (OCT 2016) (DEVIATION - NOV 2025)..........................................................................184

52.204-10 - REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (JUN 2020) (DEVIATION - NOV 2025).................................................................................185

52.208-9 - CONTRACTOR USE OF MANDATORY SOURCES OF SUPPLY OR SERVICES (MAY 2014) (DEVIATION - NOV 2025)..................................................................................................................... 187

52.232-36 - PAYMENT BY THIRD PARTY (MAY 2014) (DEVIATION - NOV 2025)........................... 188

52.216-22 - INDEFINITE QUANTITY (OCT 1995) (DEVIATION- NOV 2025)....................................189

52.240-91 - SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (ALTERNATE I - NOV 2025)

ATTACHMENT A

445
(DEVIATION)..........................................................................................................................................190

52.240-93 - BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (NOV 2025) (DEVIATION)..................................................................................................................... 201

52.208-90 - GOVERNMENT SUPPLY SOURCES (NOV 2025) (DEVIATION).................................... 202

52.209-9 - UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY MATTERS (OCT 2018) (DEVIATION - NOV 2025)...............................................................................202

52.223-23 - SUSTAINABLE PRODUCTS AND SERVICES (MAY 2024) (DEVIATION NOV 2025).... 203

ATTACHMENT A

446

52.203-3 GRATUITIES (APR 1984)
(a) The right of the Contractor to proceed may be terminated by written notice if, after notice and hearing, the agency head or a designee determines that the Contractor, its agent, or another representative—
(1) Offered or gave a gratuity (e.g., an entertainment or gift) to an officer, official, or employee of the Government; and
(2) Intended, by the gratuity, to obtain a contract or favorable treatment under a contract. (b) The facts supporting this determination may be reviewed by any court having lawful jurisdiction. (c) If this contract is terminated under paragraph (a) above, the Government is entitled— (1) To pursue the same remedies as in a breach of the contract; and (2) In addition to any other damages provided by law, to exemplary damages of not less than 3 nor more than 10 times the cost incurred by the Contractor in giving gratuities to the person concerned, as determined by the agency head or a designee. (This subparagraph (c)(2) is applicable only if this contract uses money appropriated to the Department of Defense.) (d) The rights and remedies of the Government provided in this clause shall not be exclusive and are in addition to any other rights and remedies provided by law or under this contract.

52.222-1 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES
(FEB 1997)
If the Contractor has knowledge that any actual or potential labor dispute is delaying or threatens to delay the timely performance of this contract, the Contractor shall immediately give notice, including all relevant information, to the Contracting Officer.

52.222-3 CONVICT LABOR (JUN 2003)
(a) Except as provided in paragraph (b) of this clause, the Contractor shall not employ in the performance of this contract any person undergoing a sentence of imprisonment imposed by any court of a State, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands.
(b) The Contractor is not prohibited from employing persons— (1) On parole or probation to work at paid employment during the term of their sentence; (2) Who have been pardoned or who have served their terms; or (3) Confined for violation of the laws of any of the States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, or the U.S. Virgin Islands who are authorized to work at paid employment in the community under the laws of such jurisdiction, if— (i) The worker is paid or is in an approved work training program on a voluntary basis; (ii) Representatives of local union central bodies or similar labor union organizations have been consulted;
(iii) Such paid employment will not result in the displacement of employed workers, or be Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 1 of 204

ATTACHMENT A

447
applied in skills, crafts, or trades in which there is a surplus of available gainful labor in the locality, or impair existing contracts for services; (iv) The rates of pay and other conditions of employment will not be less than those paid or provided for work of a similar nature in the locality in which the work is being performed; and
(v) The Attorney General of the United States has certified that the work-release laws or regulations of the jurisdiction involved are in conformity with the requirements of Executive Order 11755, as amended by Executive Orders 12608 and 12943.

52.224-1 PRIVACY ACT NOTIFICATION (APR 1984)
The Contractor will be required to design, develop, or operate a system of records on individuals, to accomplish an agency function subject to the Privacy Act of 1974, Public Law 93-579, December 31, 1974 (5 U.S.C. 552a) and applicable agency regulations. Violation of the Act may involve the imposition of criminal penalties.

52.224-2 PRIVACY ACT (APR 1984)
(a) The Contractor agrees to—
(1) Comply with the Privacy Act of 1974 (the Act) and the agency rules and regulations issued under the Act in the design, development, or operation of any system of records on individuals to accomplish an agency function when the contract specifically identifies— (i) The systems of records; and
(ii) The design, development, or operation work that the Contractor is to perform; (2) Include the Privacy Act notification contained in this contract in every solicitation and resulting subcontract and in every subcontract awarded without a solicitation, when the work statement in the proposed subcontract requires the redesign, development, or operation of a system of records on individuals that is subject to the Act; and (3) Include this clause, including this subparagraph (3), in all subcontracts awarded under this contract which requires the design, development, or operation of such a system of records. (b) In the event of violations of the Act, a civil action may be brought against the agency involved when the violation concerns the design, development, or operation of a system of records on individuals to accomplish an agency function, and criminal penalties may be imposed upon the officers or employees of the agency when the violation concerns the operation of a system of records on individuals to accomplish an agency function. For purposes of the Act, when the contract is for the operation of a system of records on individuals to accomplish an agency function, the Contractor is considered to be an employee of the agency.
(c) (1) "
Operation of a system of records," as used in this clause, means performance of any of the activities associated with maintaining the system of records, including the collection, use, and dissemination of records.
(2) "
Record," as used in this clause, means any item, collection, or grouping of information about an individual that is maintained by an agency, including, but not limited to, education, financial transactions, medical history, and criminal or employment history and that contains the person's name, or the identifying number, symbol, or other identifying particular assigned to the individual, such as a fingerprint or voiceprint or a photograph.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 2 of 204

ATTACHMENT A

448
(3) "System of records on individuals," as used in this clause, means a group of any records under the control of any agency from which information is retrieved by the name of the individual or by some identifying number, symbol, or other identifying particular assigned to the individual.

52.228-5 INSURANCE—WORK ON A GOVERNMENT
INSTALLATION (JAN 1997)
(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.
(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—
(1) For such period as the laws of the State in which this contract is to be performed prescribe; or (2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.
(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

52.229-1 STATE AND LOCAL TAXES (APR 1984)
Notwithstanding the terms of the Federal, State, and Local Taxes clause, the contract price excludes all State and local taxes levied on or measured by the contract or sales price of the services or completed supplies furnished under this contract. The Contractor shall state separately on its invoices taxes excluded from the contract price, and the Government agrees either to pay the amount of the taxes to the Contractor or provide evidence necessary to sustain an exemption.

52.232-37 MULTIPLE PAYMENT ARRANGEMENTS (MAY 1999)
This contract or agreement provides for payments to the Contractor through several alternative methods. The applicability of specific methods of payment and the designation of the payment office(s) are either stated— (a) Elsewhere in this contract or agreement; or
(b) In individual orders placed under this contract or agreement.

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS,
EQUIPMENT, AND VEGETATION (APR 1984)
The Contractor shall use reasonable care to avoid damaging existing buildings, equipment, and vegetation on the Government installation. If the Contractor's failure to use reasonable care causes damage to any of this property, the Contractor shall replace or repair the damage at no expense to the Government as the Contracting Officer directs. If the Contractor fails or refuses to make such repair or replacement, the Contractor shall be liable for the cost, which may be deducted from the contract price.

52.237-3 CONTINUITY OF SERVICES (JAN 1991)
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 3 of 204

ATTACHMENT A

449
(a) The Contractor recognizes that the services under this contract are vital to the Government and must be continued without interruption and that, upon contract expiration, a successor, either the Government or another contractor, may continue them. The Contractor agrees to— (1) Furnish phase-in training; and
(2) Exercise its best efforts and cooperation to effect an orderly and efficient transition to a successor.
(b) The Contractor shall, upon the Contracting Officer’s written notice, (1) furnish phase-in, phase-out services for up to 90 days after this contract expires and (2) negotiate in good faith a plan with a successor to determine the nature and extent of phase-in, phase-out services required. The plan shall specify a training program and a date for transferring responsibilities for each division of work described in the plan, and shall be subject to the Contracting Officer’s approval. The Contractor shall provide sufficient experienced personnel during the phase-in, phase-out period to ensure that the services called for by this contract are maintained at the required level of proficiency. (c) The Contractor shall allow as many personnel as practicable to remain on the job to help the successor maintain the continuity and consistency of the services required by this contract. The Contractor also shall disclose necessary personnel records and allow the successor to conduct on-site interviews with these employees. If selected employees are agreeable to the change, the Contractor shall release them at a mutually agreeable date and negotiate transfer of their earned fringe benefits to the successor.
(d) The Contractor shall be reimbursed for all reasonable phase-in, phase-out costs ( i.e., costs incurred
within the agreed period after contract expiration that result from phase-in, phase-out operations) and a fee (profit) not to exceed a pro rata portion of the fee (profit) under this contract.

52.242-13 BANKRUPTCY (JUL 1995)
In the event the Contractor enters into proceedings relating to bankruptcy, whether voluntary or involuntary, the Contractor agrees to furnish, by certified mail or electronic commerce method authorized by the contract, written notification of the bankruptcy to the Contracting Officer responsible for administering the contract.

This notification shall be furnished within five days of the initiation of the proceedings relating to bankruptcy filing. This notification shall include the date on which the bankruptcy petition was filed, the identity of the court in which the bankruptcy petition was filed, and a listing of Government contract numbers and contracting offices for all Government contracts against which final payment has not been made. This obligation remains in effect until final payment under this contract.

52.242-15 STOP-WORK ORDER (AUG 1989)
(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage.

Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either — (1) Cancel the stop-work order; or
(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract. (b) If a stop-work order issued under this clause is canceled or the period of the order or any extension Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 4 of 204

ATTACHMENT A

450
thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if —
(1) The stop-work order results in an increase in the time required for, or in the Contractor’s cost properly allocable to, the performance of any part of this contract; and (2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.
(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement. (d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

52.247-32 F.O.B. ORIGIN, FREIGHT PREPAID (FEB 2006)
(a) The term "f.o.b. origin, freight prepaid," as used in this clause, means— (1) Free of expense to the Government delivered—
(i) On board the indicated type of conveyance of the carrier (or of the Government, if specified) at a designated point in the city, county, and State from which the shipments will be made and from which line-haul transportation service (as distinguished from switching, local drayage, or other terminal service) will begin; (ii) To, and placed on, the carrier's wharf (at ship-side, within reach of the ship's loading tackle, when the shipping point is within a port area having water transportation service) or the carrier's freight station;
(iii) To a U.S. Postal Service facility; or
(iv) If stated in the solicitation, to any Government-designated point located within the same city or commercial zone as the f.o.b. origin point specified in the contract (the Federal Motor Carrier Safety Administration prescribes commercial zones at Subpart B of 49 CFR part 372); and
(2) The cost of transportation, ultimately the Government's obligation, is prepaid by the Contractor to the point specified in the contract.
(b) The Contractor shall—
(1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements to protect the goods and to ensure assessment of the lowest applicable transportation charge;
(2) (i) Order specified carrier equipment when requested by the Government; or (ii) If not specified, order appropriate carrier equipment not in excess of capacity to accommodate shipment;
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 5 of 204

ATTACHMENT A

451
(3) Deliver the shipment in good order and condition to the carrier, and load, stow, trim, block, and/or brace carload or truckload shipment (when loaded by the Contractor) on or in the carrier's conveyance as required by carrier rules and regulations; (4) Be responsible for any loss of and/or damage to the goods— (i) Occurring before delivery to the carrier;
(ii) Resulting from improper packing or marking; or
(iii) Resulting from improper loading, stowing, trimming, blocking, and/or bracing of the shipment, if loaded by the Contractor on or in the carrier's conveyance; (5) Prepare a bill of lading or other transportation receipt. The bill of lading shall show— (i) A description of the shipment in terms of the governing freight classification or tariff (or Government rate tender) under which lowest freight rates are applicable; (ii) The seals affixed to the conveyance with their serial numbers or other identification; (iii) Lengths and capacities of cars or trucks ordered and furnished; (iv) Other pertinent information required to effect prompt delivery to the consignee, including name, delivery address, postal address and ZIP code of consignee, routing, etc.; (v) Special instructions or annotations requested by the ordering agency for bills of lading; e.g., "This shipment is the property of, and the freight charges paid to the carrier(s) will be reimbursed by, the Government"; and
(vi) The signature of the carrier's agent and the date the shipment is received by the carrier;
(6) Distribute the copies of the bill of lading, or other transportation receipts, as directed by the ordering agency; and
(7) Prepay all freight charges to the extent specified in the contract. (c) These Contractor responsibilities are specified for performance at the plant or plants at which these supplies are to be finally inspected and accepted, unless the facilities for shipment by carrier's equipment are not available at the Contractor's plant, in which case the responsibilities shall be performed f.o.b. the point or points in the same or nearest city where the specified carrier's facilities are available; subject, however, to the following qualifications:
(1) If the Contractor's shipping plant is located in the State of Alaska or Hawaii, the Contractor shall deliver the supplies listed for shipment outside Alaska or Hawaii to the port of loading in Alaska or Hawaii, respectively, as specified in the contract, at Contractor's expense, and to that extent the contract shall be "f.o.b. destination."
(2) Notwithstanding subparagraph (c)(1) of this clause, if the Contractor's shipping plant is located in the State of Hawaii, and the contract requires delivery to be made by container service, the Contractor shall deliver the supplies, at the Contractor's expense to the container yard in the same or nearest city where seavan container service is available.

52.247-34 F.O.B. DESTINATION (NOV 1991)
(a) The term "f.o.b. destination," as used in this clause, means— Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 6 of 204

ATTACHMENT A

452
(1) Free of expense to the Government, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and
(2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested.

If the Contractor uses rail carrier or freight forwarder for less than carload shipments, the Contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.
(b) The Contractor shall—
(1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;
(2) Prepare and distribute commercial bills of lading;
(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;
(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract; (5) Furnish a delivery schedule and designate the mode of delivering carrier; and (6) Pay and bear all charges to the specified point of delivery.

52.247-38 F.O.B. INLAND CARRIER, POINT OF EXPORTATION
(FEB 2006)
(a) The term "f.o.b. inland carrier, point of exportation," as used in this clause, means free of expense to the Government, on board the conveyance of the inland carrier, delivered to the specified point of exportation.
(b) The Contractor shall—
(1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment for ocean transportation in conformance with carrier requirements to protect the goods and to ensure assessment of the lowest applicable transportation charge;
(2) Prepare and distribute commercial bills of lading or other transportation receipt; (3) (i) Deliver the shipment in good order and condition in or on the conveyance of the Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 7 of 204

ATTACHMENT A

453
carrier on the date or within the period specified; and (ii) Pay and bear all applicable charges, including transportation costs, to the point of delivery specified in the contract;
(4) Be responsible for any loss of and/or damage to the goods occurring before delivery of the shipment to the point of delivery in the contract; and
(5) At the Government's request and expense, assist in obtaining the documents required for (i) exportation or (ii) importation at destination.

52.247-39 F.O.B. INLAND POINT, COUNTRY OF IMPORTATION
(APR 1984)
(a) The term "f.o.b. inland point, country of importation," as used in this clause, means free of expense to the Government, on board the indicated type of conveyance of the carrier, delivered to the specified inland point where the consignee's facility is located. (b) The Contractor shall—
(1) (i) Pack and mark the shipment to comply with contract specifications; or (ii) In the absence of specifications, prepare the shipment for ocean transportation in conformance with carrier requirements to protect the goods; (2) (i) Deliver, in or on the inland carrier's conveyance, the shipment in good order and condition to the specified inland point where the consignee's facility is located; and (ii) Pay and bear all applicable charges incurred up to the point of delivery, including transportation costs; export, import, or other fees or taxes; costs of landing; wharfage costs; customs duties and costs of certificates of origin; consular invoices; and other documents that may be required for importation; and
(3) Be responsible for any loss of and/or damage to the goods until their arrival on or in the carrier's conveyance at the specified inland point.

52.247-68 REPORT OF SHIPMENT (REPSHIP) (FEB 2006)
(a) Definition. Domestic destination, as used in this clause, means— (1) A destination within the contiguous United States; or (2) If shipment originates in Alaska or Hawaii, a destination in Alaska or Hawaii, respectively. (b) Unless otherwise directed by the Contracting Officer, the Contractor shall— (1) Send a prepaid notice of shipment to the consignee transportation officer— (i) For all shipments of—
(A) Classified material, protected sensitive, and protected controlled material; (B) Explosives and poisons, class 1, division 1.1, 1.2 and 1.3; class 2, division 2.3 and class 6, division 6.1;
(C) Radioactive materials requiring the use of a III bar label; or Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 8 of 204

ATTACHMENT A

454
(ii) When a truckload/carload shipment of supplies weighing 20,000 pounds or more, or a shipment of less weight that occupies the full visible capacity of a railway car or motor vehicle, is given to any carrier (common, contract, or private) for transportation to a domestic destination (other than a port for export);
(2) Transmits the notice by rapid means to be received by the consignee transportation officer at least 24 hours before the arrival of the shipment; and
(3) Send, to the receiving transportation officer, the bill of lading or letter or other document containing the following information and prominently identified as a “Report of Shipment” or “REPSHIP FOR T.O.”
RESHIP FOR T.O. 81 JUN 01
TRANSPORTATION OFFICER, DEFENSE DEPOT, MEMPHIS, TN.

SHIPPED YOUR DEPOT 1981 JUN 1
540 CTNS MENS COTTON TROUSERS, 30,240 LB, 1782 CUBE, VIA XX-YY* IN CAR NO. XX 123456**-BL***-C98000031****CONTRACT DLA__________ ETA*****-JUNE 5 JONES & CO., JERSEY CITY N.J.
552.203-71 RESTRICTION ON ADVERTISING (SEP 1999)
The Contractor shall not refer to this contract in commercial advertising or similar promotions in such a manner as to state or imply that the product or service provided is endorsed or preferred by the White House, the Executive Office of the President, or any other element of the Federal Government, or is considered by these entities to be superior to other products or services. Any advertisement by the Contractor, including price-off coupons, that refers to a military resale activity shall contain the following statement: "This advertisement is neither paid for nor sponsored, in whole or in part, by any element of the United States Government."
552.211-73 MARKING (FEB 1996)
(a) General requirements
. Interior packages, if any, and exterior shipping containers shall be marked as specified elsewhere in the contract. Additional marking requirements may be specified on delivery orders issued under the contract. If not otherwise specified, interior packages and exterior shipping containers shall be marked in accordance with the following standards. (1) Deliveries to civilian activities. Supplies shall be marked in accordance with Federal Standard 123, edition in effect on the date of issuance of the solicitation. (2) Deliveries to military activities
. Supplies shall be marked in accordance with Military
Standard 129, edition in effect on the date of issuance of the solicitation. (b) Improperly marked material. When Government inspection and acceptance are at destination, and delivered supplies are not marked in accordance with contract requirements, the Government has the right, without prior notice to the Contractor to perform the required marking, by contract or otherwise, and charge the Contractor, therefor at the rate specified elsewhere in this contract. This right is not exclusive, and is in addition to other rights or remedies provided for in this contract. 552.211-75 PRESERVATION, PACKAGING, AND PACKING
(FEB 1996) (ALTERNATE I - MAY 2003)
Unless otherwise specified, all items shall be preserved, packaged, and packed in accordance with normal commercial practices, as defined in the applicable commodity specification. Packaging and packing shall comply with the requirements of the Uniform Freight Classification and the National Motor Freight Classification (issue in effect at time of shipment) and each shipping container of each item in a shipment shall be of uniform size and content, except for residual quantities. Where special or unusual packing is specified in an order, but not specifically provided for by the contract, such packing details must be the Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 9 of 204

ATTACHMENT A

455
subject of an agreement independently arrived at between the ordering activity and the Contractor. 552.211-77 PACKING LIST (FEB 1996) (ALTERNATE I – MAY
2003)
(a) A packing list or other suitable shipping document shall accompany each shipment and shall indicate: (1) Name and address of consignor; (2) Name and complete address of consignee; (3) Ordering activity order or requisition number; (4) Government bill of lading number covering the shipment (if any); and (5) Description of the material shipped, including item number, quantity, number of containers, and package number (if any).
(b) When payment will be made by Ordering activity commercial credit card, in addition to the information in (a) above, the packing list or shipping document shall include: (1) Cardholder name and telephone number; and (2) the term "Credit Card."
552.223-70 HAZARDOUS SUBSTANCES (MAY 1989)
(a) If the packaged items to be delivered under this contract are of a hazardous substance and ordinarily are intended or considered to be for use as a household item, this contract is subject to the Federal Hazardous Substances Act, as amended (15 U.S.C. 1261-1276), implementing regulations thereof (16 CFR Chapter II(c)), and Federal Standard No. 123, Marking for Shipment (Civil Agencies), issue in effect on the date of this solicitation.
(b) The packaged items to be delivered under this contract are subject to the preparation of shipping documents, the preparation of items for transportation, shipping container construction, package making, package labeling, when required, shipper's certification of compliance, and transport vehicle placarding in accordance with Parts 171 through 178 of 49 CFR and the Hazardous Materials Transportation Act.
(c) The minimum packaging acceptable for packaging Department of Transportation regulated hazardous materials shall be those in 49 CFR 173.
552.223-71 NONCONFORMING HAZARDOUS MATERIALS
(SEP 1999)
(a) Nonconforming supplies that contain hazardous material or that may expose persons who handle or transport the supplies to hazardous material and which require replacement under the inspection and/or warranty clauses of this contract shall be reshipped to the Contractor at the Contractor's expense. The Contractor agrees to accept return of these nonconforming supplies and to pay all costs occasioned by their return.
(b) "Hazardous materials," as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract). (c) If the Contractor fails to provide acceptable disposition instructions for the nonconforming supplies within 10 days from the date of the Government's request (or such longer period as may be agreed to between the Contracting Officer and the Contractor), or fails to accept return of the reshipped nonconforming supplies, such failure: (1) may be interpreted as a willful failure to perform, (2) may result in termination of the contract for default and (3) shall be considered by the Contracting Officer in determining the responsibility of the Contractor for any future award (see FAR 9.104-3(b) and 9.406-2). (d) Pending final resolution of any dispute, the Contractor shall promptly comply with the decision of the Contracting Officer.
552.229-70 FEDERAL, STATE, AND LOCAL TAXES (APR 1984)
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 10 of 204

ATTACHMENT A

456
The contract price includes all applicable Federal, State, and local taxes. No adjustment will be made to cover taxes which may subsequently be imposed on this transaction or changes in the rates of currently applicable taxes. However, the Government will, upon the request of the Contractor, furnish evidence appropriate to establish exemption from any tax from which the Government is exempt and which was not included in the contract price.
552.229-71 FEDERAL EXCISE TAX—DC GOVERNMENT
(SEP 1999)
If the District of Columbia cites an Internal Revenue Tax Exempt Certificate Number on orders placed under this contract, the Contractor shall bill shipments to the District of Columbia at prices exclusive of Federal excise tax and show the amount of such tax on the invoice. 552.232-23 ASSIGNMENT OF CLAIMS (SEP 1999)
Because this is a requirements or indefinite quantity contract under which more than one agency may place orders, paragraph (a) of the Assignment of Claims clause (FAR 52.232-23) is inapplicable and the following is substituted therefor:

In order to prevent confusion and delay in making payment, the Contractor shall not assign any claim(s) for amounts due or to become due under this contract. However, the Contractor is permitted to assign separately to a bank, trust company, or other financial institution, including any Federal lending agency, under the provisions of the Assignment of Claims Act, as amended, 31 U.S.C. 3727, 41 U.S.C. 15 (hereinafter referred to as "the Act"), all amounts due or to become due under any order amounting to $1,000 or more issued by any Government agency under this contract. Any such assignment takes effect only if and when the assignee files written notice of the assignment together with a true copy of the instrument of assignment with the contracting officer issuing the order and the finance office designated in the order to make payment. Unless otherwise stated in the order, payments to an assignee of any amounts due or to become due under any order assigned may, to the extent specified in the Act, be subject to reduction or set-off.

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)
This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

For contract clauses which are contained in the Federal Acquisition Regulation (FAR) the address is
http://acquisition.gov/far/.

Number Title Clause/Provision

52.202-1 DEFINITIONS (JUN 2020) Clause

52.203-17 CONTRACTOR EMPLOYEE

WHISTLEBLOWER RIGHTS AND

REQUIREMENT TO INFORM

EMPLOYEES OF WHISTLEBLOWER
RIGHTS (NOV 2023)
Clause

52.203-3 GRATUITIES (APR 1984) Clause

52.204-13 SYSTEM FOR AWARD MANAGEMENT
MAINTENANCE (OCT 2018)
(DEVIATION - NOV 2025)
Clause

52.204-19 INCORPORATION BY REFERENCE

OF REPRESENTATIONS AND
Clause
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 11 of 204

ATTACHMENT A

457
CERTIFICATIONS (DEC 2014)

52.204-7 SYSTEM FOR AWARD MANAGEMENT
(NOV 2024) (DEVIATION - NOV 2025)
Clause

52.204-9 PERSONAL IDENTITY VERIFICATION

OF CONTRACTOR PERSONNEL (JAN
2011)
Clause

52.208-9 CONTRACTOR USE OF MANDATORY

SOURCES OF SUPPLY OR SERVICES
(MAY 2014) (DEVIATION - NOV 2025)
Clause

52.209-10 PROHIBITION ON CONTRACTING

WITH INVERTED DOMESTIC
CORPORATIONS (NOV 2015)
(DEVIATION - NOV 2025)
Clause

52.215-21 REQUIREMENTS FOR CERTIFIED

COST OR PRICING DATA AND DATA

OTHER THAN CERTIFIED COST OR

PRICING DATA - MODIFICATIONS
(NOV 2021) (ALTERNATE IV - OCT
2010) (DEVIATION - NOV 2025)
Clause

52.216-18 ORDERING (AUG 2020) Clause

52.216-19 ORDER LIMITATIONS (OCT 1995) Clause

52.217-8 OPTION TO EXTEND SERVICES (NOV
1999)
Clause

52.222-1 NOTICE TO THE GOVERNMENT OF
LABOR DISPUTES (FEB 1997)
Clause

52.222-49 SERVICE CONTRACT LABOR

STANDARDS - PLACE OF

PERFORMANCE UNKNOWN (MAY
2014)
Clause

52.222-54 EMPLOYMENT ELIGIBILITY
VERIFICATION (JAN 2025) (DEVIATION
- NOV 2025)
Clause

52.223-2 REPORTING OF BIOBASED

PRODUCTS UNDER SERVICE AND

CONSTRUCTION CONTRACTS (MAY
2024) (DEVIATION NOV 2025)
Clause

52.223-5 POLLUTION PREVENTION AND

RIGHT-TO-KNOW INFORMATION (MAY
2024)
Clause

52.224-1 PRIVACY ACT NOTIFICATION (APR
1984)
Clause

52.224-2 PRIVACY ACT (APR 1984) Clause

52.224-3 PRIVACY TRAINING (JAN 2017) Clause

52.226-8 ENCOURAGING CONTRACTOR

POLICIES TO BAN TEXT MESSAGING
WHILE DRIVING (MAY 2024)
Clause

52.227-14 RIGHTS IN DATA - GENERAL (MAY
2014)
Clause
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 12 of 204

ATTACHMENT A

458

52.232-17 INTEREST (MAY 2014) (DEVIATION I -
MAY 2003)
Clause

52.232-36 PAYMENT BY THIRD PARTY (MAY
2014) (DEVIATION - NOV 2025)
Clause

52.232-37 MULTIPLE PAYMENT
ARRANGEMENTS (MAY 1999)
Clause

52.233-1 DISPUTES (MAY 2014) (DEVIATION -
NOV 2025)
Clause

52.237-2 PROTECTION OF GOVERNMENT

BUILDINGS, EQUIPMENT, AND
VEGETATION (APR 1984)
Clause

52.237-3 CONTINUITY OF SERVICES (JAN
1991)
Clause

52.242-13 BANKRUPTCY (JUL 1995) Clause

52.242-15 STOP-WORK ORDER (AUG 1989) Clause

52.242-5 PAYMENTS TO SMALL BUSINESS
SUBCONTRACTORS (JAN 2017)
Clause

52.245-1 GOVERNMENT PROPERTY (SEP
2021)
Clause

52.245-9 USE AND CHARGES (APR 2012) Clause

52.246-4 INSPECTION OF SERVICES -
FIXED-PRICE (AUG 1996) (DEVIATION
I - MAY 2003)
Clause

52.247-32 F.O.B. ORIGIN, FREIGHT PREPAID
(FEB 2006)
Clause

52.247-34 F.O.B. DESTINATION (NOV 1991) Clause

52.247-38 F.O.B. INLAND CARRIER, POINT OF
EXPORTATION (FEB 2006)
Clause

52.247-39 F.O.B. INLAND POINT, COUNTRY OF
IMPORTATION (APR 1984)
Clause
552.211-73 MARKING (FEB 1996) Clause
552.211-75 PRESERVATION, PACKAGING, AND
PACKING (FEB 1996) (ALTERNATE I -
MAY 2003)
Clause
552.211-77 PACKING LIST (FEB 1996)
(ALTERNATE I - MAY 2003)
Clause
552.211-89 NON-MANUFACTURED WOOD

PACKAGING MATERIAL FOR EXPORT
(JUL 2016)
Clause
552.229-71 FEDERAL EXCISE TAX - C
GOVERNMENT (SEP 1999)
Clause
552.252-6 AUTHORIZED DEVIATIONS IN
CLAUSES (NOV 2021) (DEVIATION
FAR 52.252-6)
Clause

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)
The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 13 of 204

ATTACHMENT A

459
provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within by written notice to the Contractor within 30 calendar days before the contract expiration date..

52.246-4 INSPECTION OF SERVICES—FIXED-PRICE (AUG 1996)
(DEVIATION - MAY 2003)
(a) Definition: "Services," as used in this clause, includes services performed, workmanship, and material furnished or utilized in the performance of services. (b) The Contractor shall provide and maintain an inspection system acceptable to the ordering activity covering the services under this contract. Complete records of all inspection work performed by the Contractor shall be maintained and made available to the ordering activity during contract performance and for as long afterwards as the contract requires.
(c) The ordering activity has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The ordering activity shall perform inspections and tests in a manner that will not unduly delay the work. (d) If the ordering activity performs inspections or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties.
(e) If any of the services do not conform with contract requirements, the ordering activity may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by reperformance, the ordering activity may—
(1) Require the Contractor to take necessary action to ensure that future performance conforms to contract requirements; and
(2) Reduce the contract price to reflect the reduced value of the services performed. (f) If the Contractor fails to promptly perform the services again or to take the necessary action to ensure future performance in conformity with contract requirements, the ordering activity may-- (1) By contract or otherwise, perform the services and charge to the Contractor any cost incurred by the ordering activity that is directly related to the performance of such service; or (2) Terminate the contract for default.

52.223-9 ESTIMATE OF PERCENTAGE OF RECOVERED

MATERIAL CONTENT FOR EPA-DESIGNATED ITEMS
(MAY 2008)
(a) Definitions. As used in this clause
#
Postconsumer material means a material or finished product that has served its intended use and has been discarded for disposal or recovery, having completed its life as a consumer item.

Postconsumer material is a part of the broader category of “recovered material.” Recovered material means waste materials and by-products recovered or diverted from solid waste, but the term does not include those materials and by-products generated from, and commonly reused within, an original manufacturing process.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 14 of 204

ATTACHMENT A

460
(b) The Contractor, on completion of this contract, shall# (1) Estimate the percentage of the total recovered material content for EPA-designated item(s) delivered and/or used in contract performance, including, if applicable, the percentage of post-consumer material content; and
(2) Submit this estimate to X.
552.246-78 INSPECTION AT DESTINATION (JUL 2009)
Inspection of all purchases under this contract will be made at destination by an authorized Government representative.

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT
(MAR 2000)
(a) The Government may extend the term of this contract by written notice to the Contractor within To be determined at the task order level; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least To be determined at the task order level days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed To be determined at the task order level (months) (years).

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE
NATIONAL LABOR RELATIONS ACT (DEC 2010)
(a) During the term of this contract, the Contractor shall post an employee notice, of such size and in such form, and containing such content as prescribed by the Secretary of Labor, in conspicuous places in and about its plants and offices where employees covered by the National Labor Relations Act engage in activities relating to the performance of the contract, including all places where notices to employees are customarily posted both physically and electronically, in the languages employees speak, in accordance with 29 CFR 471.2(d) and (f).
(1) Physical posting of the employee notice shall be in conspicuous places in and about the Contractor’s plants and offices so that the notice is prominent and readily seen by employees who are covered by the National Labor Relations Act and engage in activities related to the performance of the contract.
(2) If the Contractor customarily posts notices to employees electronically, then the Contractor shall also post the required notice electronically by displaying prominently, on any Web site that is maintained by the Contractor and is customarily used for notices to employees about terms and conditions of employment, a link to the Department of Labor’s Web site that contains the full text of the poster. The link to the Department’s Web site, as referenced in (b)(3) of this section, must read, “Important Notice about Employee Rights to Organize and Bargain Collectively with Their Employers.”
(b) This required employee notice, printed by the Department of Labor, may be — (1) Obtained from the Division of Interpretations and Standards, Office of Labor-Management Standards, U.S. Department of Labor, 200 Constitution Avenue, NW., Room N-5609, Washington, DC 20210, (202) 693-0123, or from any field office of the Office of Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 15 of 204

ATTACHMENT A

461
Labor-Management Standards or Office of Federal Contract Compliance Programs; (2) Provided by the Federal contracting agency if requested; (3) Downloaded from the Office of Labor- Management Standards Web site at http://www.dol.gov/olms/regs/compliance/EO13496.htm; or (4) Reproduced and used as exact duplicate copies of the Department of Labor’s official poster. (c) The required text of the employee notice referred to in this clause is located at Appendix A, Subpart A, 29 CFR Part 471.
(d) The Contractor shall comply with all provisions of the employee notice and related rules, regulations, and orders of the Secretary of Labor.
(e) In the event that the Contractor does not comply with the requirements set forth in paragraphs (a) through (d) of this clause, this contract may be terminated or suspended in whole or in part, and the Contractor may be suspended or debarred in accordance with 29 CFR 471.14 and subpart

9.4. Such
other sanctions or remedies may be imposed as are provided by 29 CFR part 471, which implements Executive Order 13496 or as otherwise provided by law.
(f) Subcontracts
.
(1) The Contractor shall include the substance of this clause, including this paragraph (f), in every subcontract that exceeds $10,000 and will be performed wholly or partially in the United States, unless exempted by the rules, regulations, or orders of the Secretary of Labor issued pursuant to section 3 of Executive Order 13496 of January 30, 2009, so that such provisions will be binding upon each subcontractor.
(2) The Contractor shall not procure supplies or services in a way designed to avoid the applicability of Executive Order 13496 or this clause.
(3) The Contractor shall take such action with respect to any such subcontract as may be directed by the Secretary of Labor as a means of enforcing such provisions, including the imposition of sanctions for noncompliance.
(4) However, if the Contractor becomes involved in litigation with a subcontractor, or is threatened with such involvement, as a result of such direction, the Contractor may request the United States, through the Secretary of Labor, to enter into such litigation to protect the interests of the United States.

52.204-9 PERSONAL IDENTITY VERIFICATION OF
CONTRACTOR PERSONNEL (JAN 2011)
(a) The Contractor shall comply with agency personal identity verification procedures identified in the contract that implement Homeland Security Presidential Directive-12 (HSPD-12), Office of Management and Budget (OMB) guidance M-05-24, and Federal Information Processing Standards Publication (FIPS PUB) Number 201.
(b) The Contractor shall account for all forms of Government-provided identification issued to the Contractor employees in connection with performance under this contract. The Contractor shall return such identification to the issuing agency at the earliest of any of the following, unless otherwise determined by the Government:
(1) When no longer needed for contract performance.
(2) Upon completion of the Contractor employee’s employment.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 16 of 204

ATTACHMENT A

462
(3) Upon contract completion or termination.
(c) The Contracting Officer may delay final payment under a contract if the Contractor fails to comply with these requirements.
(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts when the subcontractor‘s employees are required to have routine physical access to a Federally controlled facility and/or routine access to a Federally-controlled information system. It shall be the responsibility of the prime Contractor to return such identification to the issuing agency in accordance with the terms set forth in paragraph (b) of this section, unless otherwise approved in writing by the Contracting Officer.

52.245-9 USE AND CHARGES (APR 2012)
(a) Definitions. Definitions applicable to this contract are provided in the clause at 52.245-1, Government Property. Additional definitions as used in this clause include:
“Rental period” means the calendar period during which Government property is made available for nongovernmental purposes.
“Rental time” means the number of hours, to the nearest whole hour, rented property is actually used for nongovernmental purposes. It includes time to set up the property for such purposes, perform required maintenance, and restore the property to its condition prior to rental (less normal wear and tear).
(b) Use of Government property. The Contractor may use the Government property without charge in the performance of —
(1) Contracts with the Government that specifically authorize such use without charge; (2) Subcontracts of any tier under Government prime contracts if the Contracting Officer having cognizance of the prime contract —
(i) Approves a subcontract specifically authorizing such use; or (ii) Otherwise authorizes such use in writing; and
(3) Other work, if the Contracting Officer specifically authorizes in writing use without charge for such work.
(c) Rental. If granted written permission by the Contracting Officer, or if it is specifically provided for in the Schedule, the Contractor may use the Government property (except material) for a rental fee for work other than that provided in paragraph (b) of this clause. Authorizing such use of the Government property does not waive any rights of the Government to terminate the Contractor’s right to use the Government property. The rental fee shall be determined in accordance with the following paragraphs. (d) General.
(1) Rental requests shall be submitted to the Administrative Contracting Officer (ACO), identify the property for which rental is requested, propose a rental period, and compute an estimated rental charge by using the Contractor’s best estimate of rental time in the formulae described in paragraph (e) of this clause.
(2) The Contractor shall not use Government property for nongovernmental purposes, including Independent Research and Development, until a rental charge for real property, or estimated rental charge for other property, is agreed upon. Rented property shall be used only on a non-interference basis.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 17 of 204

ATTACHMENT A

463
(e) Rental charge.—
(1) Real property and associated fixtures.
(i) The Contractor shall obtain, at its expense, a property appraisal from an independent licensed, accredited, or certified appraiser that computes a monthly, daily, or hourly rental rate for comparable commercial property. The appraisal may be used to compute rentals under this clause throughout its effective period or, if an effective period is not stated in the appraisal, for one year following the date the appraisal was performed. The Contractor shall submit the appraisal to the ACO at least 30 days prior to the date the property is needed for nongovernmental use. Except as provided in paragraph (e)(1)(iii) of this clause, the ACO shall use the appraisal rental rate to determine a reasonable rental charge.
(ii) Rental charges shall be determined by multiplying the rental time by the appraisal rental rate expressed as a rate per hour. Monthly or daily appraisal rental rates shall be divided by 720 or 24, respectively, to determine an hourly rental rate. (iii) When the ACO believes the appraisal rental rate is unreasonable, the ACO shall promptly notify the Contractor. The parties may agree on an alternative means for computing a reasonable rental charge.
(iv) The Contractor shall obtain, at its expense, additional property appraisals in the same manner as provided in paragraph (e)(1)(i) if the effective period has expired and the Contractor desires the continued use of property for nongovernmental use. The Contractor may obtain additional appraisals within the effective period of the current appraisal if the market prices decrease substantially.
(2) Other Government property. The Contractor may elect to compute the rental charge using the appraisal method described in paragraph (e)(1) of this clause subject to the constraints therein or the following formula in which rental time shall be expressed in increments of not less than one hour with portions of hours rounded to the next higher hour: The hourly rental charge is calculated by multiplying 2 percent of the acquisition cost by the hours of rental time, and dividing by 720.
(3) Alternative methodology. The Contractor may request consideration of an alternative basis for computing the rental charge if it considers the monthly rental rate or a time-based rental unreasonable or impractical.
(f) Rental payments.
(1) Rent is due 60 days following completion of the rental period or as otherwise specified in the contract. The Contractor shall compute the rental due, and furnish records or other supporting data in sufficient detail to permit the ACO to verify the rental time and computation. Payment shall be made by check payable to the Treasurer of the United States and sent to the contract administration office identified in this contract, unless otherwise specified by the Contracting Officer.
(2) Interest will be charged if payment is not made by the date specified in paragraph (f)(1) of this clause. Interest will accrue at the “Renegotiation Board Interest Rate” (published in the Federal Register semiannually on or about January 1st and July 1st) for the period in which the rent is due.
(3) The Government’s acceptance of any rental payment under this clause, in whole or in part, shall not be construed as a waiver or relinquishment of any rights it may have against the Contractor stemming from the Contractor’s unauthorized use of Government property or any other failure to perform this contract according to its terms.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 18 of 204

ATTACHMENT A

464
(g) Use revocation. At any time during the rental period, the Government may revoke nongovernmental use authorization and require the Contractor, at the Contractor’s expense, to return the property to the Government, restore the property to its pre-rental condition (less normal wear and tear), or both. (h) Unauthorized use. The unauthorized use of Government property can subject a person to fines, imprisonment, or both, under 18 U.S.C. 641.

52.216-19 ORDER LIMITATIONS (OCT 1995)
(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than TBD [insert dollar figure or quantity], the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order
. The Contractor is not obligated to honor —
(1) Any order for a single item in excess of See SIN Specific Information [insert dollar figure or quantity];
(2) Any order for a combination of items in excess of See SIN Specific Information [insert dollar figure or quantity]; or
(3) A series of orders from the same ordering office within TBD days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.
(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within TBD days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

Note: Regulation 52.216-19
"Due to a system limitation, a Maximum Order value of $250,000 has been identified for the Order-Level Materials SIN. However, as Order-Level Materials are only acquired in direct support of an individual task or delivery order, the contractor's right to decline an order as outlined in FAR 52.216-19 Order Limitations paragraph (b) Maximum Order shall be based on the SINs that are the primary basis or purpose of the order, not the Maximum Order value associated with the Order-Level Materials SIN.

Additionally, Ordering agencies are reminded that the Maximum Order value identified for a Schedule SIN does not limit the value of an individual task or delivery order. Ordering limitations and procedures applicable to task or delivery orders inclusive of Order-Level Materials are outlined in GSAR 552.238-115, Special Ordering Procedures for the Acquisition of Order-Level Materials."

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL
HIRES (MAY 2014)
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 19 of 204

ATTACHMENT A

465
In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of
5 U.S.C. 5341 or 5332.

This Statement is for Information Only: It Is Not a Wage Determination Employee Class Monetary Wage – Fringe Benefits
To be determined at the task order level To be determined at the task order level To be determined at the task order level To be determined at the task order level To be determined at the task order level To be determined at the task order level

52.222-49 SERVICE CONTRACT LABOR STANDARDS — PLACE
OF PERFORMANCE UNKNOWN (MAY 2014)
(a) This contract is subject to the Service Contract Labor Standards statute, and the place of performance was unknown when the solicitation was issued. In addition to places or areas identified in wage determinations, if any, attached to the solicitation, wage determinations have also been requested for the following: To be determined at the task order level ( insert places or areas). The Contracting
Officer will request wage determinations for additional places or areas of performance if asked to do so in writing by To be determined at the task order level ( insert time and date).
(b) Offerors who intend to perform in a place or area of performance for which a wage determination has not been attached or requested may nevertheless submit bids or proposals. However, a wage determination shall be requested and incorporated in the resultant contract retroactive to the date of contract award, and there shall be no adjustment in the contract price.

52.222-51 EXEMPTION FROM APPLICATION OF THE SERVICE

CONTRACT LABOR STANDARDS TO CONTRACTS FOR

MAINTENANCE, CALIBRATION, OR REPAIR OF CERTAIN
EQUIPMENT--REQUIREMENTS (MAY 2014)
(a) The items of equipment to be serviced under this contract are used regularly for other than Government purposes, and are sold or traded by the Contractor in substantial quantities to the general public in the course of normal business operations.
(b) The services shall be furnished at prices which are, or are based on, established catalog or market prices for the maintenance, calibration, or repair of equipment. (1) An "established catalog price" is a price included in a catalog, price list, schedule, or other form that is regularly maintained by the manufacturer or the Contractor, is either published or otherwise available for inspection by customers, and states prices at which sales currently, or were last, made to a significant number of buyers constituting the general public. (2) An "established market price" is a current price, established in the usual course of trade between buyers and sellers free to bargain, which can be substantiated from sources independent of the manufacturer or Contractor.
(c) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract shall be the same as that used for these employees and for equivalent employees servicing Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 20 of 204

ATTACHMENT A

466
the same equipment of commercial customers.
(d) The Contractor is responsible for compliance with all the conditions of this exemption by its subcontractors. The Contractor shall determine the applicability of this exemption to any subcontract on or before subcontract award. In making a judgment that the exemption applies, the Contractor shall consider all factors and make an affirmative determination that all of the conditions in paragraphs (a) through (c) of this clause will be met.
(e) If the Department of Labor determines that any conditions for exemption in paragraphs (a) through (c) of this clause have not been met, the exemption shall be deemed inapplicable, and the contract shall become subject to the Service Contract Labor Standards statute. In such case, the procedures at 29 CFR

4.123(e)(1)(iv) and 29 CFR 4.5(c) will be followed
(f) The Contractor shall include the substance of this clause, including this paragraph (f), in subcontracts for exempt services under this contract.

52.227-14 RIGHTS IN DATA--GENERAL (MAY 2014)
(a) Definitions
. As used in this clause –
“Computer database” or “database” means a collection of recorded information in a form capable of, and for the purpose of, being stored in, processed, and operated on by a computer. The term does not include computer software.
“Computer software” –
(1) Means
(i) Computer programs that comprise a series of instructions, rules, routines, or statements, regardless of the media in which recorded, that allow or cause a computer to perform a specific operation or series of operations; and (ii) Recorded information comprising source code listings, design details, algorithms, processes, flow charts, formulas, and related material that would enable the computer program to be produced, created, or compiled.
(2) Does not include computer databases or computer software documentation. “Computer software documentation” means owner's manuals, user's manuals, installation instructions, operating instructions, and other similar items, regardless of storage medium, that explain the capabilities of the computer software or provide instructions for using the software. “Data” means recorded information, regardless of form or the media on which it may be recorded. The term includes technical data and computer software. The term does not include information incidental to contract administration, such as financial, administrative, cost or pricing, or management information.
“Form, fit, and function data” means data relating to items, components, or processes that are sufficient to enable physical and functional interchangeability, and data identifying source, size, configuration, mating and attachment characteristics, functional characteristics, and performance requirements. For computer software it means data identifying source, functional characteristics, and performance requirements but specifically excludes the source code, algorithms, processes, formulas, and flow charts of the software.
“Limited rights” means the rights of the Government in limited rights data as set forth in the Limited Rights Notice of paragraph (g)(3) if included in this clause.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 21 of 204

ATTACHMENT A

467
“Limited rights data” means data, other than computer software, that embody trade secrets or are commercial or financial and confidential or privileged, to the extent that such data pertain to items, components, or processes developed at private expense, including minor modifications. “Restricted computer software” means computer software developed at private expense and that is a trade secret, is commercial or financial and confidential or privileged, or is copyrighted computer software, including minor modifications of the computer software. “Restricted rights” as used in this clause, means the rights of the Government in restricted computer software, as set forth in a Restricted Rights Notice of paragraph (g) if included in this clause, or as otherwise may be provided in a collateral agreement incorporated in and made part of this contract, including minor modifications of such computer software. “Technical data” means recorded information (regardless of the form or method of the recording) of a scientific or technical nature (including computer databases and computer software documentation).

This term does not include computer software or financial, administrative, cost or pricing, or management data or other information incidental to contract administration. The term includes recorded information of a scientific or technical nature that is included in computer databases (See 41 U.S.C.
116).
“Unlimited rights” means the rights of the Government to use, disclose, reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, in any manner and for any purpose, and to have or permit others to do so.
(b) Allocation of rights.
(1) Except as provided in paragraph (c) of this clause, the Government shall have unlimited rights in--
(i) Data first produced in the performance of this contract; (ii) Form, fit, and function data delivered under this contract; (iii) Data delivered under this contract (except for restricted computer software) that constitute manuals or instructional and training material for installation, operation, or routine maintenance and repair of items, components, or processes delivered or furnished for use under this contract; and
(iv) All other data delivered under this contract unless provided otherwise for limited rights data or restricted computer software in accordance with paragraph (g) of this clause.
(2) The Contractor shall have the right to--
(i) Assert copyright in data first produced in the performance of this contract to the extent provided in paragraph (c)(1) of this clause;
(ii) Use, release to others, reproduce, distribute, or publish any data first produced or specifically used by the Contractor in the performance of this contract, unless provided otherwise in paragraph (d) of this clause;
(iii) Substantiate the use of, add, or correct limited rights, restricted rights, or copyright notices and to take other appropriate action, in accordance with paragraphs (e) and (f) of this clause; and
(iv) Protect from unauthorized disclosure and use those data that are limited rights data or restricted computer software to the extent provided in paragraph (g) of this clause.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 22 of 204

ATTACHMENT A

468
(c) Copyright--
(1) Data first produced in the performance of this contract. (i) Unless provided otherwise in paragraph (d) of this clause, the Contractor may, without prior approval of the Contracting Officer, assert copyright in scientific and technical articles based on or containing data first produced in the performance of this contract and published in academic, technical or professional journals, symposia proceedings, or similar works. The prior, express written permission of the Contracting Officer is required to assert copyright in all other data first produced in the performance of this contract.
(ii) When authorized to assert copyright to the data, the Contractor shall affix the applicable copyright notices of
17 U.S.C. 401 or 402, and an acknowledgment of
Government sponsorship (including contract number).
(iii) For data other than computer software, the Contractor grants to the Government, and others acting on its behalf, a paid-up, nonexclusive, irrevocable, worldwide license in such copyrighted data to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly by or on behalf of the Government. For computer software, the Contractor grants to the Government, and others acting on its behalf, a paid-up, nonexclusive, irrevocable, worldwide license in such copyrighted computer software to reproduce, prepare derivative works, and perform publicly and display publicly (but not to distribute copies to the public) by or on behalf of the Government.
(2) Data not first produced in the performance of this contract . The Contractor shall not, without
the prior written permission of the Contracting Officer, incorporate in data delivered under this contract any data not first produced in the performance of this contract unless the Contractor-- (i) Identifies the data; and
(ii) Grants to the Government, or acquires on its behalf, a license of the same scope as set forth in paragraph (c)(1) of this clause or, if such data are restricted computer software, the Government shall acquire a copyright license as set forth in paragraph (g)(4) of this clause (if included in this contract) or as otherwise provided in a collateral agreement incorporated in or made part of this contract.
(3) Removal of copyright notices
. The Government will not remove any authorized copyright notices placed on data pursuant to this paragraph (c), and will include such notices on all reproductions of the data.
(d) Release, publication, and use of data
. The Contractor shall have the right to use, release to others, reproduce, distribute, or publish any data first produced or specifically used by the Contractor in the performance of this contract, except--
(1) As prohibited by Federal law or regulation (e.g., export control or national security laws or regulations);
(2) As expressly set forth in this contract; or
(3) If the Contractor receives or is given access to data necessary for the performance of this contract that contain restrictive markings, the Contractor shall treat the data in accordance with such markings unless specifically authorized otherwise in writing by the Contracting Officer. (e) Unauthorized marking of data.
(1) Notwithstanding any other provisions of this contract concerning inspection or acceptance, if Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 23 of 204

ATTACHMENT A

469
any data delivered under this contract are marked with the notices specified in paragraph (g) (3) or (g) (4) if included in this clause, and use of the notices is not authorized by this clause, or if the data bears any other restrictive or limiting markings not authorized by this contract, the Contracting Officer may at any time either return the data to the Contractor, or cancel or ignore the markings. However, pursuant to
41 U.S.C. 4703, the following procedures shall apply prior to canceling or ignoring the markings.
(i) The Contracting Officer will make written inquiry to the Contractor affording the Contractor 60 days from receipt of the inquiry to provide written justification to substantiate the propriety of the markings;
(ii) If the Contractor fails to respond or fails to provide written justification to substantiate the propriety of the markings within the 60-day period (or a longer time approved in writing by the Contracting Officer for good cause shown), the Government shall have the right to cancel or ignore the markings at any time after said period and the data will no longer be made subject to any disclosure prohibitions.
(iii) If the Contractor provides written justification to substantiate the propriety of the markings within the period set in paragraph (e)(1)(i) of this clause, the Contracting Officer will consider such written justification and determine whether or not the markings are to be cancelled or ignored. If the Contracting Officer determines that the markings are authorized, the Contractor will be so notified in writing. If the Contracting Officer determines, with concurrence of the head of the contracting activity, that the markings are not authorized, the Contracting Officer will furnish the Contractor a written determination, which determination will become the final agency decision regarding the appropriateness of the markings unless the Contractor files suit in a court of competent jurisdiction within 90 days of receipt of the Contracting Officer's decision. The Government will continue to abide by the markings under this paragraph (e)(1)(iii) until final resolution of the matter either by the Contracting Officer's determination becoming final (in which instance the Government will thereafter have the right to cancel or ignore the markings at any time and the data will no longer be made subject to any disclosure prohibitions), or by final disposition of the matter by court decision if suit is filed. (2) The time limits in the procedures set forth in paragraph (e)(1) of this clause may be modified in accordance with agency regulations implementing the Freedom of Information Act (5 U.S.C. 552) if necessary to respond to a request thereunder.
(3) Except to the extent the Government's action occurs as the result of final disposition of the matter by a court of competent jurisdiction, the Contractor is not precluded by paragraph (e) of the clause from bringing a claim, in accordance with the Disputes clause of this contract, that may arise as the result of the Government removing or ignoring authorized markings on data delivered under this contract.
(f) Omitted or incorrect markings.
(1) Data delivered to the Government without any restrictive markings shall be deemed to have been furnished with unlimited rights. The Government is not liable for the disclosure, use, or reproduction of such data.
(2) If the unmarked data has not been disclosed without restriction outside the Government, the Contractor may request, within 6 months (or a longer time approved by the Contracting Officer in writing for good cause shown) after delivery of the data, permission to have authorized notices placed on the data at the Contractor's expense. The Contracting Officer may agree to do so if the Contractor--
(i) Identifies the data to which the omitted notice is to be applied; (ii) Demonstrates that the omission of the notice was inadvertent; Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 24 of 204

ATTACHMENT A

470
(iii) Establishes that the proposed notice is authorized; and (iv) Acknowledges that the Government has no liability for the disclosure, use, or reproduction of any data made prior to the addition of the notice or resulting from the omission of the notice.
(3) If data has been marked with an incorrect notice, the Contracting Officer may-- (i) Permit correction of the notice at the Contractor's expense if the Contractor identifies the data and demonstrates that the correct notice is authorized; or (ii) Correct any incorrect notices.
(g) Protection of limited rights data and restricted computer software. (1) The Contractor may withhold from delivery qualifying limited rights data or restricted computer software that are not data identified in paragraphs (b)(1)(i), (ii), and (iii) of this clause.

As a condition to this withholding, the Contractor shall-- (i) Identify the data being withheld; and
(ii) Furnish form, fit, and function data instead.
(2) Limited rights data that are formatted as a computer database for delivery to the Government shall be treated as limited rights data and not restricted computer software. (3) [Reserved]
(h) Subcontracting. The Contractor shall obtain from its subcontractors all data and rights therein necessary to fulfill the Contractor's obligations to the Government under this contract. If a subcontractor refuses to accept terms affording the Government those rights, the Contractor shall promptly notify the Contracting Officer of the refusal and shall not proceed with the subcontract award without authorization in writing from the Contracting Officer. (i) Relationship to patents or other rights
. Nothing contained in this clause shall imply a license to the Government under any patent or be construed as affecting the scope of any license or other right otherwise granted to the Government.

52.232-17 INTEREST (MAY 2014) (DEVIATION – MAY 2003)
(a) Except as otherwise provided in this contract under a Price Reduction for Defective Certified Cost or Pricing Data clause or a Cost Accounting Standards clause, all amounts that become payable by the Contractor to the ordering activity under this contract (net of any applicable tax credit under the Internal Revenue Code (26 U.S.C. 1481)) shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in
41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in paragraph (b) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (b) Amounts shall be due at the earliest of the following dates:
(1) The date fixed under this contract.
(2) The date of the first written demand for payment consistent with this contract, including any demand resulting from a default termination.
(3) The date the ordering activity transmits to the Contractor a proposed supplemental agreement Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 25 of 204

ATTACHMENT A

471
to confirm completed negotiations establishing the amount of debt. (4) If this contract provides for revision of prices, the date of written notice to the Contractor stating the amount of refund payable in connection with a pricing proposal or a negotiated pricing agreement not confirmed by contract modification.
(c) The interest charge made under this clause may be reduced under the procedures prescribed in

32.614-2 of the Federal Acquisition Regulation in effect on the date of this contract.

52.204-19 INCORPORATION BY REFERENCE OF
REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)
The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. 552.223-73 PRESERVATION, PACKAGING, PACKING, MARKING

AND LABELING OF HAZARDOUS MATERIALS (HAZMAT) FOR
SHIPMENTS (JUN 2015)
(a) Definition
. United States, as used in this clause, means the 48 adjoining U.S. States, Alaska, Hawaii, and U.S. territories and possessions, such as Puerto Rico. (b) Preservation, packaging, packing, marking and labeling of hazardous materials for export shipment outside the United States in all transport modes shall comply with the following, as applicable:
(1) International Maritime Dangerous Goods (IMDG) Code as established by the International Maritime Organization (IMO).
(2) U.S. Department of Transportation (DOT) Hazardous Material Regulation (HMR) 49 CFR parts 171 through 180. (Note: Classifications permitted by the HMR, but not permitted by the IMDG code, such as Consumer Commodities classed as ORM–D, shall be packaged in accordance with the IMDG Code and dual-marked with both Consumer Commodity and IMDG marking and labeling.)
(3) Occupational Safety and Health Administration (OSHA) Regulation 29 CFR part 1910.1200. (4) International Air Transport Association (IATA), Dangerous Goods Regulation and/or International Civil Aviation Organization (ICAO), Technical Instructions. (5) AFMAN 24–204, Air Force Inter- Service Manual, Preparing Hazardous Materials For Military Air Shipments.
(6) Any preservation, packaging, packing, marking and labeling requirements contained elsewhere in this solicitation and contract.
(c) Preservation, packaging, packing, marking and labeling of hazardous materials for domestic shipments within the United States in all transport modes shall comply with the following; as applicable:
(1) U.S. Department of Transportation (DOT) Hazardous Material Regulation (HMR) 49 CFR parts 171 through 180.
(2) Occupational Safety and Health Administration (OSHA) Regulation 29 CFR part 1910.1200. (3) Any preservation, packaging, packing, marking and labeling requirements contained elsewhere in this solicitation and contract.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 26 of 204

ATTACHMENT A

472
(d) Hazardous Material Packages designated for outside the United States destinations through Forwarding Points, Distribution Centers, or Container Consolidation Points (CCPs) shall comply with the IMDG, IATA, ICAO or AFMAN 24–204 codes, as applicable. (e) The test certification data showing compliance with performance-oriented packaging or UN-approved packaging requirements shall be made available to GSA contract administration/management representatives or regulatory inspectors upon request. 552.228-5 GOVERNMENT AS ADDITIONAL INSURED (JAN 2016)
(a) This clause supplements the requirements set forth in FAR clause 52.228-5, Insurance–Work on a Government Installation.
(b) Each insurance policy required under this contract, other than workers’ compensation insurance, shall contain an endorsement naming the United States as an additional insured with respect to operations performed under this contract. The insurance carrier is required to waive all subrogation rights against any of the named insured.
552.211-89 NON-MANUFACTURED WOOD PACKAGING
MATERIAL FOR EXPORT (JUL 2016)
(a) Definitions:

IPPC Country: Countries of the European Union (EU) or any other country endorsing the International Plant Protection Convention (IPPC) “Guidelines for Regulating Wood Packaging Material in International Trade,” approved March 15, 2002. A listing of countries participating in the IPPC is found at
http://www.aphis.usda.gov/import_export/plants/plants_exports/wpm/country/index.shtml Non-Manufactured wood, is also called solid wood and defined as wood packing other than that comprised wholly of wood-based products such as plywood, particle board, oriented strand board, veneer, wood wool, and similar materials, which has been created using glue, heat and pressure or a combination thereof.

Packaged material, and Solid Wood Packing Material (SWPM), for purposes of this clause, is defined as each separate and distinct material that by itself or in combination with other materials forms the container providing a means of protecting and handling a product. This includes, but is not limited to, pallets, dunnage, crating, packing blocks, drums, load boards, pallet collars, and skids. (b) Non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries must be marked and properly treated in accordance with IPPC guidelines.
(c) This requirement applies whether the shipment is direct to the end user or through a Government designated consolidation point. Packaging that does not conform to IPPC guidelines will be refused entry, destroyed or treated prior to entry.
(d) For Department of Defense distribution facilities or freight consolidation points, all non-manufactured wood pallets or packaging material with a probability of entering countries endorsing the IPPC Guidelines must be treated and marked in accordance with DLA 47.305-1 (available at
http://farsite.hill.af.mil/archive/Dlad/Rev5/PART47.htm), and MIL-STD-2073-1, Standard Practice for Military Packaging (and any future revision). (e) Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 27 of 204

ATTACHMENT A

473
(f) Delays in delivery caused by non-complying pallets or wood package material will not be considered as beyond the control of the Contractor. Any applicable Government expense incurred as a result of the Contractor’s failure to provide appropriate pallets or package material shall be reimbursed by the Contractor. Expenses may include the applicable cost for repackage, handling and return shipping, or the destruction of solid wood packaging material.

52.224-3 PRIVACY TRAINING (JAN 2017)
(a) Definition
. As used in this clause, “personally identifiable information” means information that can be used to distinguish or trace an individual's identity, either alone or when combined with other information that is linked or linkable to a specific individual. ( See Office of Management and Budget
(OMB) Circular A-130, Managing Federal Information as a Strategic Resource). (b) The Contractor shall ensure that initial privacy training, and annual privacy training thereafter, is completed by contractor employees who–
(1) Have access to a system of records;
(2) Create, collect, use, process, store, maintain, disseminate, disclose, dispose, or otherwise handle personally identifiable information on behalf of an agency; or (3) Design, develop, maintain, or operate a system of records (see also FAR subpart 24.1 and

39.105).
(c) (1) Privacy training shall address the key elements necessary for ensuring the safeguarding of personally identifiable information or a system of records. The training shall be role-based, provide foundational as well as more advanced levels of training, and have measures in place to test the knowledge level of users. At a minimum, the privacy training shall cover — (i) The provisions of the Privacy Act of 1974 (5 U.S.C. 552a), including penalties for violations of the Act;
(ii) The appropriate handling and safeguarding of personally identifiable information; (iii) The authorized and official use of a system of records or any other personally identifiable information;
(iv) The restriction on the use of unauthorized equipment to create, collect, use, process, store, maintain, disseminate, disclose, dispose or otherwise access personally identifiable information;
(v) The prohibition against the unauthorized use of a system of records or unauthorized disclosure, access, handling, or use of personally identifiable information; and (vi) The procedures to be followed in the event of a suspected or confirmed breach of a system of records or the unauthorized disclosure, access, handling, or use of personally identifiable information (see OMB guidance for Preparing for and Responding to a Breach of Personally Identifiable Information).
(2) Completion of an agency-developed or agency-conducted training course shall be deemed to satisfy these elements.
(d) The Contractor shall maintain and, upon request, provide documentation of completion of privacy training to the Contracting Officer.
(e) The Contractor shall not allow any employee access to a system of records, or permit any employee to create, collect, use, process, store, maintain, disseminate, disclose, dispose or otherwise handle Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 28 of 204

ATTACHMENT A

474
personally identifiable information, or to design, develop, maintain, or operate a system of records unless the employee has completed privacy training, as required by this clause. (f) The substance of this clause, including this paragraph (f), shall be included in all subcontracts under this contract, when subcontractor employees will–
(1) Have access to a system of records;
(2) Create, collect, use, process, store, maintain, disseminate, disclose, dispose, or otherwise handle personally identifiable information; or
(3) Design, develop, maintain, or operate a system of records.

52.242-5 PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS
(JAN 2017)
(a) Definitions. As used in this clause —
Reduced payment means a payment that is for less than the amount agreed upon in a subcontract in accordance with its terms and conditions, for supplies and services for which the Government has paid the prime contractor.

Untimely payment means a payment that is more than 90 days past due under the terms and conditions of a subcontract, for supplies and services for which the Government has paid the prime contractor.
(b) Notice
. The Contractor shall notify the Contracting Officer, in writing, not later than 14 days after —
(1) A small business subcontractor was entitled to payment under the terms and conditions of the subcontract; and
(2) The Contractor —
(i) Made a reduced or untimely payment to the small business subcontractor; or (ii) Failed to make a payment, which is now untimely.
(c) Content of notice
. The Contractor shall include the reason(s) for making the reduced or untimely payment in any notice required under paragraph (b) of this clause.

52.222-41 SERVICE CONTRACT LABOR STANDARDS (AUG 2018)
(a) Definitions. As used in this clause –
Contractor when this clause is used in any subcontract, shall be deemed to refer to the subcontractor, except in the term "Government Prime Contractor."
Service employee means any person engaged in the performance of this contract other than any person employed in a bona fide executive, administrative, or professional capacity, as these terms are defined in Part 541 of Title 29, Code of Federal Regulations, as revised. It includes all such persons regardless of any contractual relationship that may be alleged to exist between a Contractor or subcontractor. (b) Applicability
. This contract is subject to the following provisions and to all other applicable provisions of 41 U.S.C. chapter 67, Service Contract Labor Standards, and regulations of the Secretary of Labor (29 CFR Part 4). This clause does not apply to contracts or subcontracts administratively Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 29 of 204

ATTACHMENT A

475
exempted by the Secretary of Labor or exempted by 41 U.S.C. 6702, as interpreted in Subpart C of 29 CFR Part 4.
(c) Compensation. (1) Each service employee employed in the performance of this contract by the Contractor or any subcontractor shall be paid not less than the minimum monetary wages and shall be furnished fringe benefits in accordance with the wages and fringe benefits determined by the Secretary of Labor or authorized representative, as specified in any wage determination attached to this contract. (2) (i) If a wage determination is attached to this contract, the Contractor shall classify any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed class of employees shall be paid the monetary wages and furnished the fringe benefits as are determined pursuant to the procedures in this paragraph (c).
(ii) This conforming procedure shall be initiated by the Contractor prior to the performance of contract work by the unlisted class of employee. The Contractor shall submit
Standard Form (SF) 1444, Request for Authorization of Additional Classification and Rate, to the Contracting Officer no later than 30 days after the unlisted class of employee performs any contract work. The Contracting Officer shall review the proposed classification and rate and promptly submit the completed SF 1444 (which must include information regarding the agreement or disagreement of the employees' authorized representatives or the employees themselves together with the agency recommendation), and all pertinent information to the Wage and Hour Division, U.S. Department of Labor.

The Wage and Hour Division will approve, modify, or disapprove the action or render a final determination in the event of disagreement within 30 days of receipt or will notify the Contracting Officer within 30 days of receipt that additional time is necessary. (iii) The final determination of the conformance action by the Wage and Hour Division shall be transmitted to the Contracting Officer who shall promptly notify the Contractor of the action taken. Each affected employee shall be furnished by the Contractor with a written copy of such determination or it shall be posted as a part of the wage determination.
(iv) (A) The process of establishing wage and fringe benefit rates that bear a reasonable relationship to those listed in a wage determination cannot be reduced to any single formula. The approach used may vary from wage determination to wage determination depending on the circumstances. Standard wage and salary administration practices which rank various job classifications by pay grade pursuant to point schemes or other job factors may, for example, be relied upon.

Guidance may also be obtained from the way different jobs are rated under Federal pay systems (Federal Wage Board Pay System and the General Schedule) or from other wage determinations issued in the same locality. Basic to the establishment of any conformable wage rate(s) is the concept that a pay relationship should be maintained between job classifications based on the skill required and the duties performed.
(B) In the case of a contract modification, an exercise of an option or extension of an existing contract, or in any other case where a Contractor succeeds a contract under which the classification in question was previously conformed pursuant to paragraph (c) of this clause, a new conformed wage rate and fringe benefits may be assigned to the conformed classification by indexing (i.e., adjusting) the previous conformed rate and fringe benefits by an amount equal to the average (mean) percentage increase (or decrease, where appropriate) between the wages and fringe benefits specified for all classifications to be used on the contract which are listed in the current wage determination, and those specified for the Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 30 of 204

ATTACHMENT A

476
corresponding classifications in the previously applicable wage determination.

Where conforming actions are accomplished in accordance with this paragraph prior to the performance of contract work by the unlisted class of employees, the Contractor shall advise the Contracting Officer of the action taken but the other procedures in subdivision (c)(2)(ii) of this clause need not be followed. (C) No employee engaged in performing work on this contract shall in any event be paid less than the currently applicable minimum wage specified under section 6(a)(1) of the Fair Labor Standards Act of 1938, as amended. (v) The wage rate and fringe benefits finally determined under this paragraph (c)(2) of this clause shall be paid to all employees performing in the classification from the first day on which contract work is performed by them in the classification. Failure to pay the unlisted employees the compensation agreed upon by the interested parties and/or finally determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Service Contract Labor Standards statute and this contract.
(vi) Upon discovery of failure to comply with subparagraphs (b)(2) of this clause, the Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be retroactive to the date such class or classes of employees commenced contract work.
(3) Adjustment of Compensation. If the term of this contract is more than 1 year, the minimum monetary wages and fringe benefits required to be paid or furnished thereunder to service employees under the contract shall be subject to adjustment after 1 year and not less often than once every 2 years, under wage determinations issued by the Wage and Hour Division. (d) Obligation to Furnish Fringe Benefits
. The Contractor or subcontractor may discharge the
obligation to furnish fringe benefits specified in the attachment or determined under subparagraph (c)(2) of this clause by furnishing equivalent combinations of bona fide fringe benefits, or by making equivalent or differential cash payments, only in accordance with Subpart D of 29 CFR Part 4. (e) Minimum Wage
. In the absence of a minimum wage attachment for this contract, neither the Contractor nor any subcontractor under this contract shall pay any person performing work under this contract (regardless of whether the person is a service employee) less than the minimum wage specified by section 6(a)(1) of the Fair Labor Standards Act of 1938. Nothing in this clause shall relieve the Contractor or any subcontractor of any other obligation under law or contract for payment of a higher wage to any employee.
(f) Successor Contracts
. If this contract succeeds a contract subject to the Service Contract Labor Standards statute under which substantially the same services were furnished in the same locality and service employees were paid wages and fringe benefits provided for in a collective bargaining agreement, in the absence of the minimum wage attachment for this contract setting forth such collectively bargained wage rates and fringe benefits, neither the Contractor nor any subcontractor under this contract shall pay any service employee performing any of the contract work (regardless of whether or not such employee was employed under the predecessor contract), less than the wages and fringe benefits provided for in such collective bargaining agreement, to which such employee would have been entitled if employed under the predecessor contract, including accrued wages and fringe benefits and any prospective increases in wages and fringe benefits provided for under such agreement.

No Contractor or subcontractor under this contract may be relieved of the foregoing obligation unless the limitations of 29 CFR 4.1b(b) apply or unless the Secretary of Labor or the Secretary’s authorized representative finds, after a hearing as provided in 29 CFR 4.10 that the wages and/or fringe benefits provided for in such agreement are substantially at variance with those which prevail for services of a character similar in the locality, or determines, as provided in 29 CFR 4.11, that the collective bargaining agreement applicable to service employees employed under the predecessor contract was not entered into as a result of arm’s length negotiations. Where it is found in accordance with the review procedures provided in 29 CFR 4.10 and/or 4.11 and Parts 6 and 8 that some or all of the wages and/or Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 31 of 204

ATTACHMENT A

477
fringe benefits contained in a predecessor Contractor’s collective bargaining agreement are substantially at variance with those which prevail for services of a character similar in the locality, and/or that the collective bargaining agreement applicable to service employees employed under the predecessor contract was not entered into as a result of arm’s length negotiations, the Department will issue a new or revised wage determination setting forth the applicable wage rates and fringe benefits.

Such determination shall be made part of the contract or subcontract, in accordance with the decision of the Administrator, the Administrative Law Judge, or the Administrative Review Board, as the case may be, irrespective of whether such issuance occurs prior to or after the award of a contract or subcontract (53 Comp. Gen. 401 (1973)). In the case of a wage determination issued solely as a result of a finding of substantial variance, such determination shall be effective as of the date of the final administrative decision.
(g) Notification to employees
. The Contractor and any subcontractor under this contract shall notify each service employee commencing work on this contract of the minimum monetary wage and any fringe benefits required to be paid pursuant to this contract, or shall post the wage determination attached to this contract. The poster provided by the Department of Labor (Publication WH 1313) shall be posted in a prominent and accessible place at the worksite. Failure to comply with this requirement is a violation of
41 U.S.C. 6703 and of this contract.
(h) Safe and Sanitary Working Conditions. The Contractor or subcontractor shall not permit any part of the services called for by this contract to be performed in buildings or surroundings or under working conditions provided by or under the control or supervision of the Contractor or subcontractor which are unsanitary or hazardous or dangerous to the health or safety of the service employee. The Contractor or subcontractor shall comply with the safety and health standards applied under 29 CFR Part 1925. (i) Records
. (1) The Contractor and each subcontractor performing work subject to the Service Contract Labor Standards statute shall make and maintain for 3 years from the completion of the work, and make them available for inspection and transcription by authorized representatives of the Wage and Hour Division, a record of the following:
(i) For each employee subject to the Service Contract Labor Standards statute — (A) Name and address and social security number;
(B) Correct work classification or classifications, rate or rates of monetary wages paid and fringe benefits provided, rate or rates of payments in lieu of fringe benefits, and total daily and weekly compensation;
(C) Daily and weekly hours worked by each employee; and (D) Any deductions, rebates, or refunds from the total daily or weekly compensation of each employee.
(ii) For those classes of service employees not included in any wage determination attached to this contract, wage rates or fringe benefits determined by the interested parties or by the Administrator or authorized representative under the terms of paragraph (c) of this clause. A copy of the report required by subdivision (c)(2)(ii) of this clause will fulfill this requirement.
(iii) Any list of the predecessor Contractor's employees which had been furnished to the Contractor as prescribed by paragraph (n) of this clause. (2) The Contractor shall also make available a copy of this contract for inspection or transcription by authorized representatives of the Wage and Hour Division. (3) Failure to make and maintain or to make available these records for inspection and transcription shall be a violation of the regulations and this contract, and in the case of failure to produce these records, the Contracting Officer, upon direction of the Department of Labor and Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 32 of 204

ATTACHMENT A

478
notification to the Contractor, shall take action to cause suspension of any further payment or advance of funds until the violation ceases.
(4) The Contractor will permit authorized representatives of the Wage and Hour Division to conduct interviews with employees at the worksite during normal working hours. (j) Pay Periods. The Contractor shall unconditionally pay to each employee subject to the Service Contract Labor Standards statute all wages due free and clear and without subsequent deduction (except as otherwise provided by law or regulations, 29 CFR Part 4), rebate, or kickback on any account. These payments shall be made no later than one pay period following the end of the regular pay period in which the wages were earned or accrued. A pay period under this statute may not be of any duration longer than semi-monthly.
(k) Withholding of Payments and Termination of Contract. The Contracting Officer shall withhold or cause to be withheld from the Government Prime Contractor under this or any other Government contract with the Prime Contractor such sums as an appropriate official of the Department of Labor requests or such sums as the Contracting Officer decides may be necessary to pay underpaid employees employed by the Contractor or subcontractor. In the event of failure to pay any employees subject to the Service Contract Labor Standards statute all or part of the wages or fringe benefits due under the Service Contract Labor Standards statute, the Contracting Officer may, after authorization or by direction of the Department of Labor and written notification to the Contractor, take action to cause suspension of any further payment or advance of funds until such violations have ceased. Additionally, any failure to comply with the requirements of this clause may be grounds for termination of the right to proceed with the contract work. In such event, the Government may enter into other contracts or arrangements for completion of the work, charging the Contractor in default with any additional cost. (l) Subcontract
s. The Contractor agrees to insert this clause in all subcontracts subject to the Service Contract Labor Standards statute.
(m) Collective Bargaining Agreements Applicable to Service Employees . If wages to be paid or fringe
benefits to be furnished any service employees employed by the Government prime Contractor or any subcontractor under the contract are provided for in a collective bargaining agreement which is or will be effective during any period in which the contract is being performed, the Government prime Contractor shall report such fact to the Contracting Officer, together with full information as to the application and accrual of such wages and fringe benefits, including any prospective increases, to service employees engaged in work on the contract, and a copy of the collective bargaining agreement.

Such report shall be made upon commencing performance of the contract, in the case of collective bargaining agreements effective at such time, and in the case of such agreements or provisions or amendments thereof effective at a later time during the period of contract performance such agreements shall be reported promptly after negotiation thereof.
(n) Seniority List
. Not less than 10 days prior to completion of any contract being performed at a Federal facility where service employees may be retained in the performance of the succeeding contract and subject to a wage determination which contains vacation or other benefit provisions based upon length of service with a Contractor (predecessor) or successor (29 CFR 4.173), the incumbent prime Contractor shall furnish to the Contracting Officer a certified list of the names of all service employees on the Contractor's or subcontractor's payroll during the last month of contract performance. Such list shall also contain anniversary dates of employment on the contract either with the current or predecessor Contractors of each such service employee. The Contracting Officer shall turn over such list to the successor Contractor at the commencement of the succeeding contract. (o) Ruling and Interpretations
. Rulings and interpretations of the Service Contract Labor Standards statute are contained in Regulations, 29 CFR Part 4.
(p) Contractor's Certification
. (1) By entering into this contract, the Contractor (and officials thereof) certifies that neither it nor any person or firm who has a substantial interest in the Contractor’s firm is a person or firm ineligible to be awarded Government contracts by virtue of the sanctions imposed under 41 U.S.C. 6706.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 33 of 204

ATTACHMENT A

479
(2) No part of this contract shall be subcontracted to any person or firm ineligible for award of a Government contract under 41 U.S.C. 6706.
(3) The penalty for making false statements is prescribed in the U.S. Criminal Code, 18 U.S.C. 1001.
(q) Variations, Tolerances, and Exemptions Involving Employment . Notwithstanding any of the
provisions in paragraphs (b) through (o) of this clause, the following employees may be employed in accordance with the following variations, tolerances, and exemptions, which the Secretary of Labor, pursuant to
41 U.S.C. 6707 prior to its amendment by Pub. L. 92-473, found to be necessary and proper in the public interest or to avoid serious impairment of the conduct of Government business:
(1) Apprentices, student-learners, and workers whose earning capacity is impaired by age, physical or mental deficiency, or injury may be employed at wages lower than the minimum wages otherwise required by
41 U.S.C. 6703(1) without diminishing any fringe benefits or cash payments in lieu thereof required under 41 U.S.C. 6703(2), in accordance with the conditions and procedures prescribed for the employment of apprentices, student-learners, persons with disabilities, and disabled clients of work centers under section 14 of the Fair Labor Standards Act of 1938, in the regulations issued by the Administrator (29 CFR parts 520, 521, 524, and 525). (2) The Administrator will issue certificates under the statute for the employment of apprentices, student-learners, persons with disabilities, or disabled clients of work centers not subject to the Fair Labor Standards Act of 1938, or subject to different minimum rates of pay under the two statutes, authorizing appropriate rates of minimum wages (but without changing requirements concerning fringe benefits or supplementary cash payments in lieu thereof), applying procedures prescribed by the applicable regulations issued under the Fair Labor Standards Act of 1938 (29 CFR parts 520, 521, 524, and 525).
(3) The Administrator will also withdraw, annul, or cancel such certificates in accordance with the regulations in 29 CFR Parts 525 and 528.
(r) Apprentices
. Apprentices will be permitted to work at less than the predetermined rate for the work they perform when they are employed and individually registered in a bona fide apprenticeship program registered with a State Apprenticeship Agency which is recognized by the U.S. Department of Labor, or if no such recognized agency exists in a State, under a program registered with the Office of Apprenticeship Training, Employer, and Labor Services (OATELS), U.S. Department of Labor. Any employee who is not registered as an apprentice in an approved program shall be paid the wage rate and fringe benefits contained in the applicable wage determination for the journeyman classification of work actually performed. The wage rates paid apprentices shall not be less than the wage rate for their level of progress set forth in the registered program, expressed as the appropriate percentage of the journeyman's rate contained in the applicable wage determination. The allowable ratio of apprentices to journeymen employed on the contract work in any craft classification shall not be greater than the ratio permitted to the Contractor as to his entire work force under the registered program. (s) Tips
. An employee engaged in an occupation in which the employee customarily and regularly receives more than $30 a month in tips may have the amount of these tips credited by the employer against the minimum wage required by 41 U.S.C. 6703(1), in accordance with section 3(m) of the Fair Labor Standards Act and Regulations, 29 CFR Part 531. However, the amount of credit shall not exceed $1.34 per hour beginning January 1, 1981. To use this provision — (1) The employer must inform tipped employees about this tip credit allowance before the credit is utilized;
(2) The employees must be allowed to retain all tips (individually or through a pooling arrangement and regardless of whether the employer elects to take a credit for tips received); (3) The employer must be able to show by records that the employee receives at least the applicable Service Contract Labor Standards minimum wage through the combination of direct Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 34 of 204

ATTACHMENT A

480
wages and tip credit;
(4) The use of such tip credit must have been permitted under any predecessor collective bargaining agreement applicable by virtue of 41 U.S.C. 6707(c). (t) Disputes Concerning Labor Standards. The U.S. Department of Labor has set forth in 29 CFR Parts 4, 6, and 8 procedures for resolving disputes concerning labor standards requirements. Such disputes shall be resolved in accordance with those procedures and not the Disputes clause of this contract.

Disputes within the meaning of this clause include disputes between the Contractor (or any of its subcontractors) and the contracting agency, the U.S. Department of Labor, or the employees or their representatives.

Note: Regulation 52.222-41
NOTE: This clause does not apply to the following 5 subcategories under Large Category C - Furniture and Furnishings: Office Furniture; Healthcare Furniture; Household, Dormitory & Quarters Furniture; Packaged Furniture; Miscellaneous Furniture.

52.222-43 FAIR LABOR STANDARDS ACT AND SERVICE
CONTRACT LABOR STANDARDS—PRICE ADJUSTMENT
(MULTIPLE YEAR AND OPTION CONTRACTS) (AUG 2018)
(a) This clause applies to both contracts subject to area prevailing wage determinations and contracts subject to collective bargaining agreements.
(b) The Contractor warrants that the prices in this contract do not include any allowance for any contingency to cover increased costs for which adjustment is provided under this clause. (c) The wage determination, issued under the Service Contract Labor Standards statute, ( 41 U.S.C.
chapter 67), by the Administrator, Wage and Hour Division, U.S. Department of Labor, current on the anniversary date of a multiple year contract or the beginning of each renewal option period, shall apply to this contract. If no such determination has been made applicable to this contract, then the Federal minimum wage as established by section 6(a)(1) of the Fair Labor Standards Act of 1938, as amended, (
29 U.S.C. 206) current on the anniversary date of a multiple year contract or the beginning of each renewal option period, shall apply to this contract.
(d) The contract price, contract unit price labor rates, or fixed hourly labor rates will be adjusted to reflect the Contractor’s actual increase or decrease in applicable wages and fringe benefits to the extent that the increase is made to comply with or the decrease is voluntarily made by the Contractor as a result of:
(1) The Department of Labor wage determination applicable on the anniversary date of the multiple year contract, or at the beginning of the renewal option period. For example, the prior year wage determination required a minimum wage rate of $4.00 per hour. The Contractor chose to pay $4.10. The new wage determination increases the minimum rate to $4.50 per hour. Even if the Contractor voluntarily increases the rate to $4.75 per hour, the allowable price adjustment is $.40 per hour;
(2) An increase or decrease wage determination otherwise applied to the contract by operation of law; or
(3) An amendment to the Fair Labor Standards Act of 1938 that is enacted after award of this contract, affects the minimum wage, and becomes applicable to this contract under law. (e) Any adjustment will be limited to increases or decreases in wages and fringe benefits as described in Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 35 of 204

ATTACHMENT A

481
paragraph (d) of this clause, and the accompanying increases or decreases in social security and unemployment taxes and workers’ compensation insurance, but shall not otherwise include any amount for general and administrative costs, overhead, or profit. (f) The Contractor shall notify the Contracting Officer of any increase claimed under this clause within 30 days after receiving a new wage determination unless this notification period is extended in writing by the Contracting Officer. The Contractor shall promptly notify the Contracting Officer of any decrease under this clause, but nothing in the clause shall preclude the Government from asserting a claim within the period permitted by law. The notice shall contain a statement of the amount claimed and the change in fixed hourly rates (if this is a time-and-materials or labor-hour contract), and any relevant supporting data, including payroll records, that the Contracting Officer may reasonably require.

Upon agreement of the parties, the contract price, contract unit price labor rates, or fixed hourly rates shall be modified in writing. The Contractor shall continue performance pending agreement on or determination of any such adjustment in its effective date. (g) The Contracting Officer or an authorized representative shall have access to and the right to examine any directly pertinent books, documents, papers and records of the Contractor until the expiration of 3 years after final payment under the contract.

52.232-33 PAYMENT BY ELECTRONIC FUNDS
TRANSFER-SYSTEM FOR AWARD MANAGEMENT (OCT 2018)
(a) Method of payment.
(1) All payments by the Government under this contract shall be made by electronic funds transfer (EFT), except as provided in paragraph (a)(2) of this clause. As used in this clause, the term “EFT” refers to the funds transfer and may also include the payment information transfer. (2) In the event the Government is unable to release one or more payments by EFT, the Contractor agrees to either—
(i) Accept payment by check or some other mutually agreeable method of payment; or (ii) Request the Government to extend the payment due date until such time as the Government can make payment by EFT (but see paragraph (d) of this clause). (b) Contractor's EFT information
. The Government shall make payment to the Contractor using the EFT information contained in the System for Award Management (SAM). In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to SAM. (c) Mechanisms for EFT payment
. The Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in 31 CFR Part 210.
(d) Suspension of payment
. If the Contractor’s EFT information in SAM is incorrect, then the Government need not make payment to the Contractor under this contract until correct EFT information is entered into SAM; and any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply. (e) Liability for uncompleted or erroneous transfers.
(1) If an uncompleted or erroneous transfer occurs because the Government used the Contractor’s EFT information incorrectly, the Government remains responsible for— (i) Making a correct payment;
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 36 of 204

ATTACHMENT A

482
(ii) Paying any prompt payment penalty due; and
(iii) Recovering any erroneously directed funds.
(2) If an uncompleted or erroneous transfer occurs because the Contractor’s EFT information was incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and—
(i) If the funds are no longer under the control of the payment office, the Government is deemed to have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or
(ii) If the funds remain under the control of the payment office, the Government shall not make payment, and the provisions of paragraph (d) of this clause shall apply. (f) EFT and prompt paymen
t. A payment shall be deemed to have been made in a timely manner in accordance with the prompt payment terms of this contract if, in the EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System.
(g) EFT and assignment of claims
. If the Contractor assigns the proceeds of this contract as provided for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall register separately in SAM and shall be paid by EFT in accordance with the terms of this clause. Notwithstanding any other requirement of this contract, payment to an ultimate recipient other than the Contractor, or a financial institution properly recognized under an assignment of claims pursuant to
Subpart 32.8, is not permitted. In all respects, the
requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause.
(h) Liability for change of EFT information by financial agent . The Government is not liable for errors
resulting from changes to EFT information made by the Contractor’s financial agent. (i) Payment information
. The payment or disbursing office shall forward to the Contractor available payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address contained in SAM. 552.238-107 TRAFFIC RELEASE (SUPPLIES) (MAY 2019)
Supplies ordered by GSA for export will not be shipped by the Contractor until shipping instructions are received from GSA. To obtain shipping instructions, the Contractor shall forward completed copies of GSA Form 1611, Application for Shipping Instructions and Notice of Availability, to the GSA office designated on the purchase order at least 15 days prior to the anticipated shipping date. Copies of GSA Form 1611 will be furnished to the Contractor with the purchase order. Failure to comply with this requirement could result in nonacceptance of the material by authorities at the port of exportation. When supplies for export are ordered by other Government agencies the Contractor should obtain shipping instructions from the ordering agency.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 37 of 204

ATTACHMENT A

483
552.238-86 DELIVERY SCHEDULE (MAY 2019)
(a) Time of delivery. The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO) in the case of F.O.B. Destination prices; or to place of shipment in transit in the case of F.O.B. Origin prices, as set forth below. Offerors shall insert in the ''Time of Delivery (days ARO)'' column in the schedule of Items a definite number of calendar days within which delivery will be made. In no case shall the offered delivery time exceed the Contractor's normal business practice. The Government requires the Contractor's normal delivery time, as long as it is less than the ''stated'' delivery time(s) shown below. If the Offeror does not insert a delivery time in the schedule of items, the Offeror will be deemed to offer delivery in accordance with the Government's stated delivery time, as stated below [
The contracting officer shall insert the solicited items or Special Item Numbers (SIN) as well as a reasonable delivery time that corresponds with each item or SIN, if known]:

Items or group of items (special item no. or nomenclature) ______
Government's stated delivery time (days ARO)
______
Contractor's delivery time
______
(b) Expedited delivery times
. For those items that can be delivered quicker than the delivery times in paragraph (a) of this clause, the Offeror is requested to insert below, a time (hours/days ARO) that delivery can be made when expedited delivery is requested.

Items or group of items (special item no. or nomenclature) ______
Expedited delivery time (hours/days ARO)
______
(c) Overnight and 2-Day delivery times. Ordering activities may require overnight or 2-day delivery.

The Offeror is requested to annotate its price list or by separate attachment identify the items that can be delivered overnight or within 2 days. Contractors offering such delivery services will be required to state in the cover sheet to its FSS price list details concerning this service. 552.238-89 DELIVERIES TO THE U.S. POSTAL SERVICE (MAY
2019)
(a) Applicability
. This clause applies to orders placed for the U.S. Postal Service (USPS) and accepted by the Contractor for the delivery of supplies to a USPS facility (consignee). (b) Mode/method of transportation. Unless the Contracting Officer grants a waiver of this requirement, any shipment that meets the USPS requirements for mailability (i.e., 70 pounds or less, combined length and girth not more than 108 inches, etc.) delivery shall be accomplished via the use of the USPS.

Other commercial services shall not be used, but this does not preclude the Contractor from making delivery by the use of the Contractor's own vehicles.
(c) Time of delivery
. Notwithstanding the required time for delivery to destination as may be specified elsewhere in this contract, if shipments under this clause are mailed not later than five (5) calendar days before the required delivery date, delivery shall be deemed to have been made timely. 552.238-90 CHARACTERISTICS OF ELECTRIC CURRENT (MAY
2019)
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 38 of 204

ATTACHMENT A

484
Contractors supplying equipment which uses electrical current are required to supply equipment suitable for the electrical system at the location at which the equipment is to be used as specified on the order.
552.238-91 MARKING AND DOCUMENTATION REQUIREMENTS
FOR SHIPPING (MAY 2019)
(a) Responsibility
. It shall be the responsibility of the ordering activity to determine the full marking and documentation requirements necessary under the various methods of shipment authorized by the contract.
(b) Documentation. In the event the ordering activity fails to provide the essential information and documentation, the Contractor shall, within three days after receipt of order, contact the ordering activity and advise them accordingly. The Contractor shall not proceed with any shipment requiring transshipment via U.S. Government facilities without the prerequisites stated in paragraph (c) of this section.
(c) Direct shipments
. The Contractor shall mark all items ordered against this contract with indelible ink, paint or fluid, as follows:
(1) Traffic Management or Transportation Officer at FINAL destination. (2) Ordering Supply Account Number.
(3) Account number.
(4) Delivery Order or Purchase Order Number.
(5) National Stock Number, if applicable; or Contractor's item number. (6) Box ______ of ______ Boxes.
(7) Nomenclature (brief description of items).
552.238-92 VENDOR MANAGED INVENTORY (VMI) PROGRAM
(MAY 2019)
(a) The term “Vendor Managed Inventory” describes a system in which the Contractor monitors and maintains specified inventory levels for selected items at designated stocking points. VMI enables the Contractor to plan production and shipping more efficiently. Stocking points benefit from reduced inventory but steady stock levels.
(b) Contractors that commercially provide a VMI-type system may enter into similar partnerships with ordering agencies under a Blanket Purchase Agreement.
552.238-93 ORDER ACKNOWLEDGMENT (MAY 2019)
Contractors shall acknowledge only those orders which state “Order Acknowledgment Required.” These orders shall be acknowledged within 10 calendar days after receipt. Such acknowledgment shall be sent to the ordering activity placing the order and contain information pertinent to the order, including the anticipated delivery date.
552.238-94 ACCELERATED DELIVERY REQUIREMENTS (MAY
2019)
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 39 of 204

ATTACHMENT A

485
When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, the ordering activity is encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within three (3) business days after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract. 552.238-95 SEPARATE CHARGE FOR PERFORMANCE
ORIENTED PACKAGING (POP) (MAY 2019)
(a) Offerors are requested to list the hazardous material item to which the separate charge applies in the spaces provided in this paragraph or on a separate attachment. The final price shall be quoted separately at the order level and, if considered reasonable, will be accepted as part of the order.

ITEMS
SINS or Descriptive Name of Articles (as
appropriate)
Charge for Performance Oriented
(b) Ordering activities will not be obligated to utilize the Contractor's services for Performance Oriented Packaging, and they may obtain such services elsewhere if desired. However, the Contractor shall provide items in Performance Oriented Packaging when such packing is specified on the delivery order. The Contractor's contract price and the charge for Performance Oriented Packaging will be shown as separate entries on the delivery order.
552.238-96 SEPARATE CHARGE FOR DELIVERY WITHIN
CONSIGNEE'S PREMISES (MAY 2019)
538.273(d)(20)
(a) Offerors are requested to insert, in the spaces provided below or by attachment hereto, a separate charge for “Delivery Within Consignee's Premises” applicable to each shipping container to be shipped. (Articles which are comparable in size and weight, and for which the same charge is applicable, should be grouped under an appropriate item description.) These additional charges will be accepted as part of the award, if considered reasonable, and shall be included in the Contractor's published catalog and/or price list.
(b) Ordering activities are not obligated to issue orders on the basis of “Delivery Within Consignee's Premises,” and Contractors may refuse delivery on that basis provided such refusal is communicated in writing to the ordering activity issuing such orders within 5 days of the receipt of such order by the Contractor and provided further, that delivery is made in accordance with the other delivery requirements of the contract. Failure of the Contractor to submit this notification within the time specified shall constitute acceptance to furnish “Delivery Within Consignee's Premises” at the additional charge awarded. When an ordering activity issues an order on the basis of “Delivery Within Consignee's Premises” at the accepted additional charge awarded and the Contractor accepts such orders on that basis, the Contractor will be obligated to provide delivery “F.o.b. Destination, Within Consignee's Premises” in accordance with FAR 52.247-35, which is then incorporated by reference, with the exception that an additional charge as provided herein is allowed for such services. Unless otherwise stipulated by the Offeror, the additional charges awarded hereunder may be applied to any delivery within the 48 contiguous States and the District of Columbia. (c) When exercising their option to issue orders on the basis of delivery service as provided herein, ordering activities will specify “Delivery Within Consignee's Premises” on the order, and will indicate the exact location to which delivery is to be made. The Contractor's delivery price and the additional Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 40 of 204

ATTACHMENT A

486
charge(s) for “Delivery Within Consignee's Premises” will be shown as separate entries on the order..

ITEMS
(NSNs or Special Item Numbers or Descriptive Name of
Articles)
Additional Charge (Per shipping container)
FOR “DELIVERY WITHIN CONSIGNEE'S PREMISES”
552.238-100 TRANSSHIPMENTS (MAY 2019)
(a) The Contractor shall complete two (2) DD Forms 1387, Military Shipment Labels and, if applicable, four copies of DD Form 1387-2, Special Handling/Data Certification-used when shipping chemicals, dangerous cargo, etc.
(1) Two copies of the DD Form 1387 will be attached to each shipping container delivered to the port Transportation Officer for subsequent transshipment by the Government as otherwise provided for under the terms of this contract.
(2) These forms will be attached to one end and one side, not on the top or bottom, of the container.
(3) The Contractor will complete the bottom line of these forms, which pertains to the number of pieces, weight and cube of each piece, using U.S. weight and cubic measures. Weights will be rounded off to the nearest pound. (One kg = 2.2 U.S. pounds; one cubic meter = 35.3156 cubic feet.)
(b) In addition, if the cargo consists of chemicals, or is dangerous, one copy of the DD Form 1387-2 will be attached to the container, and three copies will be furnished to the Transportation Officer with the Bill of Lading.
(c) Dangerous cargo will not be intermingled with non-dangerous cargo in the same container. (d) Copies of the above forms and preparation instructions will be obtained from the ordering activity issuing the Delivery Order. Reproduced copies of the forms are acceptable. (e) Failure to include DD Form 1387, and DD Form 1387-2, if applicable, on each shipping container will result in rejection of shipment by the port Transportation Officer. 552.238-101 FOREIGN TAXES AND DUTIES (MAY 2019)
Prices offered must be net, delivered, f.o.b. to the destinations accepted by the Government. (a) The Contractor warrants that such prices do not include any tax, duty, customs fees, or other foreign Governmental costs, assessments, or similar charges from which the U.S. Government is exempt. (b) Standard commercial export packaging, including containerization, if necessary, packaging, preservation, and/or marking are included in the pricing offered and accepted by the Government. 552.238-102 ENGLISH LANGUAGE AND U.S. DOLLAR
REQUIREMENTS (MAY 2019)
(a) All documents produced by the Contractor to fulfill requirements of this contract including, but not Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 41 of 204

ATTACHMENT A

487
limited to, Federal Supply Schedule catalogs and price lists, must reflect all terms and conditions in the English language.
(b) U.S. dollar equivalency, if applicable, will be based on the rates published in the “Treasury Reporting Rates of Exchange” in effect as of the date of the agency's purchase order or in effect during the time period specified elsewhere in this contract.
552.238-103 ELECTRONIC COMMERCE (MAY 2019)
(a) General background. The Federal Acquisition Streamlining Act (FASA) of 1994 requires the Government to evolve its acquisition process from one driven by paper to an expedited process based on electronic commerce/electronic data interchange (EC/EDI). EC/EDI encompasses more than merely automating manual processes and eliminating paper transactions. EC/EDI improves business processes (e.g. procurement, finance, logistics) into a fully electronic environment and fundamentally changes the way organizations operate.
(b) Trading partners and Value-Added Networks (VAN's).
(1) Within the electronic commerce architecture, electronic documents (e.g., orders, invoices, etc.) are carried between the Federal Government's procuring office and Contractors (now known as “trading partners”). These transactions are carried by commercial telecommunications companies called Value-Added Networks (VAN's).
(2) EDI can be performed using commercially available hardware, software, and telecommunications. The selection of a VAN is a business decision Contractors must make.

There are many different VAN's which provide a variety of electronic services and different pricing strategies. If the VAN only provides communications services, you may also need a software translation package.
(c) Registration instructions. To perform EDI with the Government, Contractors shall register as a trading partner. Contractors will provide regular business information, banking information, and EDI capabilities to all agencies in this single registration. A central repository of all trading partners is the Systems for Award Management (SAM)
http://www.sam.gov. Contractors shall follow the instructions on the SAM website regarding how to register for EDI.
(d) Implementation conventions. All EDI transactions must comply with the Federal Implementation Conventions (ICs). The ICs are available on a registry maintained by the National Institute of Standards and Technology (NIST). It is accessible via the INTERNET at http://www.nist.gov/itl. ICs are available
for common business documents such as Purchase Order, Price Sales Catalog, Invoice, Request for Quotes, etc.
(e) Additional information. GSA has additional information available for Contractors who are interested in using EC/EDI on its website,
http://www.gsa.gov.
(f) GSA Advantage!®.
(1) GSA Advantage!® uses electronic commerce to receive catalogs, invoices and text messages; and to send purchase orders, application advice, and functional acknowledgments.

GSA Advantage!® enables customers to:
(i) Perform database searches across all contracts by manufacturer; manufacturer's model/part number; Contractor; and generic supply categories. (ii) Generate EDI delivery orders to Contractors, generate EDI delivery orders from the Federal Supply Service to Contractors, or download files to create their own delivery orders.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 42 of 204

ATTACHMENT A

488
(iii) Use the credit card.
(2) GSA Advantage!® may be accessed via the GSA Home Page. The Internet address is:
http://www.gsa.gov.

Note: Regulation 552.238-103
Note: All contractors are required to comply with GSA's established catalog submission and maintenance rules to ensure accurate and complete electronic commerce representation.

Detailed instructions and guidance can be found in the FAS Catalog Platform (FCP) Help Page at: https://catalog.gsa.gov/help.
552.238-104 DISSEMINATION OF INFORMATION BY
CONTRACTOR (MAY 2019)
The Government will provide the Contractor with a single copy of the resulting Federal Supply Schedule contract award documents. However, it is the responsibility of the Contractor to furnish all sales outlets authorized to participate in the performance of the contract with the terms, conditions, pricing schedule, and other appropriate information.
552.238-106 INTERPRETATION OF CONTRACT REQUIREMENTS
(MAY 2019)
No interpretation of any provision of this contract, including applicable specifications, shall be binding on the Government unless furnished or agreed to in writing by the Contracting Officer or his designated representative.
552.238-70 COVER PAGE FOR WORLDWIDE FEDERAL SUPPLY
SCHEDULES (MAY 2019) FOR ALL GEOGRAPHIC AREAS
Solicitation No. 47QSMD20R0001 Refresh 0030
Federal Supply Schedule Contract for All Geographic Areas. (a) Federal Supply Classification (FSC) GROUP: Various
PART: Various
SECTION: Various
SUPPLY: Various
FSC CLASS(ES)/PRODUCT CODE(S)/NAICS: Various
(b) STANDARD INDUSTRY GROUP: Various
SERVICE: Various
SERVICE CODE(S)/NAICS: Various
552.238-79 CANCELLATION (MAY 2019)
Either party may cancel this contract in whole or in part by providing written notice. The cancellation will take effect 30 calendar days after the other party receives the notice of cancellation. If the Contractor elects to cancel this contract, the Government will not reimburse the minimum guarantee. 552.238-81 PRICE REDUCTIONS (MAY 2019)
(a) Before award of a contract, the Contracting Officer and the Offeror will agree upon (1) the customer Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 43 of 204

ATTACHMENT A

489
(or category of customers) which will be the basis of award, and (2) the Government's price or discount relationship to the identified customer (or category of customers). This relationship shall be maintained throughout the contract period. Any change in the Contractor's commercial pricing or discount arrangement applicable to the identified customer (or category of customers) which disturbs this relationship shall constitute a price reduction.
(b) During the contract period, the Contractor shall report to the Contracting Officer all price reductions to the customer (or category of customers) that was the basis of award. The Contractor's report shall include an explanation of the conditions under which the reductions were made. (c) (1) A price reduction shall apply to purchases under this contract if, after the date negotiations conclude, the Contractor
(i) Revises the commercial catalog, pricelist, schedule or other document upon which contract award was predicated to reduce prices;
(ii) Grants more favorable discounts or terms and conditions than those contained in the commercial catalog, pricelist, schedule or other documents upon which contract award was predicated; or
(iii) Grants special discounts to the customer (or category of customers) that formed the basis of award, and the change disturbs the price/discount relationship of the Government to the customer (or category of customers) that was the basis of award. (2) The Contractor shall offer the price reduction to the eligible ordering activity with the same effective date, and for the same time period, as extended to the commercial customer (or category of customers).
(d) There shall be no price reduction for sales —
(1) To commercial customers under firm, fixed-price definite quantity contracts with specified delivery in excess of the maximum order threshold specified in this contract; (2) To Federal agencies;
(3) Made to Eligible Ordering Activities identified in GSAR Clause 552.238-113 when the order is placed under this contract (and the Eligible Ordering Activities identified in GSAR Clause 552.238-113 is the agreed upon customer or category of customer that is the basis of award); or (4) Caused by an error in quotation or billing, provided adequate documentation is furnished by the Contractor to the Contracting Officer.
(e) The Contractor may offer the Contracting Officer a voluntary Governmentwide price reduction at any time during the contract period.
(f) The Contractor shall notify the Contracting Officer of any price reduction subject to this clause as soon as possible, but not later than 15 calendar days after its effective date. (g) The contract will be modified to reflect any price reduction which becomes applicable in accordance with this clause.

Note: Regulation 552.238-81
This clause does not apply to contracts participating in the Transactional Data Reporting (TDR) Pilot. Please refer to clause 552.238-81 Alternate I.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 44 of 204

ATTACHMENT A

490
552.238-81 PRICE REDUCTIONS (MAY 2019) (ALTERNATE I -
APR 2014)
(a) The Government may request from the Contractor, and the Contractor may provide to the Government, a temporary or permanent price reduction at any time during the contract period. (b) The Contractor may offer the Contracting Officer a voluntary price reduction at any time during the contract period.

Note: Regulation 552.238-81
This clause applies to contracts participating in the Transactional Data Reporting (TDR) Pilot.
552.238-83 EXAMINATION OF RECORDS BY GSA (FEDERAL
SUPPLY SCHEDULES) (MAY 2019)
The Contractor agrees that the Administrator of General Services or any duly authorized representative shall have access to and the right to examine any books, documents, papers and records of the contractor involving transactions related to this contract for overbillings, billing errors, compliance with contract clauses 552.238-81, Price Reductions and 552.238-80, Industrial Funding Fee and Sales Reporting. This authority shall expire 3 years after final payment. The basic contract and each option shall be treated as separate contracts for purposes of applying this clause.

Note: Regulation 552.238-83
The types of books, documents, papers and records shall include but are not to be limited to:
- Eligible users of the GSA Sources of Supply and Services, as defined by OGP 4800.2I and/or subsequent orders,
- Basis of Award customers, 552.238-81 Price Reductions, and 552.238-80 Industrial Funding Fee and Sales Reporting,
- Verifying CSP-1 Form accuracy and completeness,
- GSA MAS Contractor Team Arrangements (CTAs), and
- Authorized Dealers incorporated into the MAS contract by the Contracting Officer. 552.238-84 DISCOUNTS FOR PROMPT PAYMENT (MAY 2019)
(a) Discounts for early payment (hereinafter referred to as “discounts” or “the discount”) will be considered in evaluating the relationship of the Offeror's concessions to the Government vis-a-vis the Offeror's concessions to its commercial and Federal non-schedule customers, but only to the extent indicated in this clause.
(b) Discounts will not be considered to determine the low Offeror in the situation described in the “Offers on Identical Products” provision of this solicitation. (c) Uneconomical discounts will not be considered as meeting the criteria for award established by the Government. In this connection, a discount will be considered uneconomical if the annualized rate of return for earning the discount is lower than the “value of funds” rate established by the Department of the Treasury and published quarterly in the Federal Register. The “value of funds” rate applied will be the rate in effect on the date specified for the receipt of offers.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 45 of 204

ATTACHMENT A

491
(d) Discounts for early payment may be offered either in the original offer or on individual invoices submitted under the resulting contract. Discounts offered will be taken by the ordering activity if payment is made within the discount period specified.
(e) Discounts that are included in offers become a part of the resulting contracts and are binding on the Contractor for all orders placed under the contract. Discounts offered only on individual invoices will be binding on the Contractor only for the particular invoice on which the discount is offered. (f) In connection with any discount offered for prompt payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the date on which an electronic funds transfer was made.
552.238-85 CONTRACTOR'S BILLING RESPONSIBILITIES
(MAY 2019)
(a) The Contractor is required to perform all billings made pursuant to this contract. However, if the Contractor has dealers that participate on the contract and the billing/payment process by the Contractor for sales made by the dealer is a significant administrative burden, the following alternative procedures may be used. Where dealers are allowed by the Contractor to bill ordering activities and accept payment in the Contractor's name, the Contractor agrees to obtain from all dealers participating in the performance of the contract a written agreement, which will require dealers to (1) Comply with the same terms and conditions as the Contractor for sales made under the contract;
(2) Maintain a system of reporting sales under the contract to the manufacturer, which includes (i) The date of sale;
(ii) The ordering activity to which the sale was made;
(iii) The service or supply/model sold;
(iv) The quantity of each service or supply/model sold; (v) The price at which it was sold, including discounts; and (vi) All other significant sales data.
(3) Be subject to audit by the Government, with respect to sales made under the contract; and (4) Place orders and accept payments in the name of the Contractor in care of the dealer. (b) An agreement between a Contractor and its dealers pursuant to this procedure will not establish privity of contract between dealers and the Government. 552.238-87 DELIVERY PRICES (MAY 2019)
(a) Prices offered must cover delivery as provided below to destinations located within the 48 contiguous States and the District of Columbia.
(1) Delivery to the door of the specified Government activity by freight or express common carriers on articles for which store-door delivery is provided, free or subject to a charge, pursuant to regularly published tariffs duly filed with the Federal and/or State regulatory bodies governing such carrier; or, at the option of the Contractor, by parcel post on mailable articles, or by the Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 46 of 204

ATTACHMENT A

492
Contractor's vehicle. Where store-door delivery is subject to a charge, the Contractor shall place the notation “Delivery Service Requested” on bills of lading covering such shipments, and pay such charge and add the actual cost thereof as a separate item to his invoice. (2) Delivery to siding at destinations when specified by the ordering office, if delivery is not covered under paragraph (a)(1) of this section.
(3) Delivery to the freight station nearest destination when delivery is not covered under paragraph (a)(1) or (2) of this section.
(b) The Offeror shall indicate in the offer whether or not prices submitted cover delivery f.o.b. destination in Alaska, Hawaii, and the Commonwealth of Puerto Rico. (c) When deliveries are made to destinations outside the contiguous 48 States; i.e., Alaska, Hawaii, and the Commonwealth of Puerto Rico, and are not covered by paragraph (b), above, the following conditions will apply:
(1) Delivery will be f.o.b. inland carrier, point of exportation (FAR 52.247-38), with the transportation charges to be paid by the Government from point of exportation to destination in Alaska, Hawaii, or the Commonwealth of Puerto Rico, as designated by the ordering office. The Contractor shall add the actual cost of transportation to destination from the point of exportation in the 48 contiguous States nearest to the designated destination. Such costs will, in all cases, be based upon the lowest regularly established rates on file with the Interstate Commerce Commission, the U.S. Maritime Commission (if shipped by water), or any State regulatory body, or those published by the U.S. Postal Service; and must be supported by paid freight or express receipt or by a statement of parcel post charges including weight of shipment. (2) The right is reserved to ordering agencies to furnish Government bills of lading. 552.238-97 PARTS AND SERVICE (MAY 2019)
(a) For equipment under items listed in the schedule of items or services on which offers are submitted, the Contractor represents by submission of this offer that parts and services (including the performing of warranty or guarantee service) are now available from dealers or distributors serving the areas of ultimate overseas destination or that such facilities will be established and will be maintained throughout the contract period. If a new servicing facility is to be established, the facility shall be established no later than the beginning of the contract period. (b) Each Contractor shall be fully responsible for the services to be performed by the named servicing facilities, or by such facilities to be established, and fully guarantees performance of such services if the original service proves unsatisfactory.
(c) Contractors are requested to provide the Ordering Activity, the names and addresses of all supply and service points maintained in the geographic area in which the Contractor will perform. Please indicate opposite each point whether or not a complete stock of repair parts for items offered is carried at that point, and whether or not mechanical service is available. 552.238-98 CLAUSES FOR OVERSEAS COVERAGE (MAY 2019)
(a) 52.214-34 Submission of Offers in the English Language (b) 52.214-35 Submission of Offers in U.S. Currency
(c)
552.238-90 Characteristics of Electric Current
(d) 552.238-91 Marking and Documentation Requirements Per Shipment Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 47 of 204

ATTACHMENT A

493
(e) 552.238-97 Parts and Service
(f) 552.238-99 Delivery Prices Overseas
(g) 552.238-100 Transshipments
(h) 552.238-101 Foreign Taxes and Duties
(i) 52.247-34 FOB Destination
(j) 52.247-38 FOB Inland Carrier, Point of Exportation
(k) 52.247-39 FOB Inland Point, Country of Importation
552.238-99 DELIVERY PRICES OVERSEAS (MAY 2019)
(a) Prices offered must cover delivery to destinations as provided as follows:
(1) Direct delivery to consignee. F.O.B. Inland Point, Country of Importation (FAR 52.247-39). (Offeror should indicate countries where direct delivery will be provided.) (2) Delivery to overseas assembly point for transshipment when specified by the ordering activity, if delivery is not covered under paragraph (1), above. (3) Delivery to the overseas port of entry when delivery is not covered under paragraph (a)(1) or (2) of this section.
(b) Geographic area(s)/countries/zones which are intended to be covered must be identified in the offer.

52.216-32 TASK-ORDER AND DELIVERY-ORDER OMBUDSMAN (SEP 2019) (ALT I SEP 2019)
(a) In accordance with 41 U.S.C. 4106(g), the Agency has designated the following task-order and delivery-order Ombudsman for this contract. The Ombudsman must review complaints from the Contractor concerning all task-order and delivery-order actions for this contract and ensure the Contractor is afforded a fair opportunity for consideration in the award of orders, consistent with the procedures in the contract. [Contracting Officer to insert name, address, telephone number, and email address for the Agency Ombudsman or provide the URL address where this information may be found.] (b) Consulting an ombudsman does not alter or postpone the timeline for any other process (e.g., protests).
(c) Before consulting with the Ombudsman, the Contractor is encouraged to first address complaints with the Contracting Officer for resolution. When requested by the Contractor, the Ombudsman may keep the identity of the concerned party or entity confidential, unless prohibited by law or agency procedure. (d) Contracts used by multiple agencies.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 48 of 204

ATTACHMENT A

494
(1) This is a contract that is used by multiple agencies. Complaints from Contractors concerning orders placed under contracts used by multiple agencies are primarily reviewed by the task-order and delivery-order Ombudsman for the ordering activity.
(2) The ordering activity has designated the following task-order and delivery-order Ombudsman for this order:
[The ordering activity's contracting officer to insert the name, address, telephone number, and email address for the ordering activity's Ombudsman or provide the URL address where this information may be found.]
(3) Before consulting with the task-order and delivery-order Ombudsman for the ordering activity, the Contractor is encouraged to first address complaints with the ordering activity's Contracting Officer for resolution. When requested by the Contractor, the task-order and delivery-order Ombudsman for the ordering activity may keep the identity of the concerned party or entity confidential, unless prohibited by law or agency procedure.

End of clause

52.219-13 NOTICE OF SET-ASIDE OF ORDERS (MAR 2020)
(a) The Contracting Officer may set aside orders for the small business concerns identified in 19.000(a)(3). (b) The Contracting Officer will give notice of the order or orders, if any, to be set aside for small business concerns identified in

19.000(a)(3) and the applicable small business program. This notice, and its restrictions, will apply only to the specific orders that have been set aside for any of the small business concerns identified in

19.000(a)(3).

End of clause
552.238-77 SUBMISSION AND DISTRIBUTION OF AUTHORIZED
FEDERAL SUPPLY SCHEDULE PRICE LISTS (MAR 2020)
(a) The Contractor shall submit its Authorized Federal Supply Schedule Price List on a common-use electronic medium as prescribed by GSA. Some structured data entry in a prescribed format may be required.
(b) Eligible ordering activities will utilize GSA’s online shopping and ordering system to review a Contractors’ price lists.

End of clause
Note: Regulation 552.238-77
Contractors must follow the detailed guidance and requirements provided in the Requirements after getting a MAS contract page
(https://www.gsa.gov/buy-through-us/purchasing-programs/multiple-award-schedule/help -with-mas-contracts-to-sell-to-government/requirements
-after-getting-a-mas-contract?gsaredirect=mascontractrequirements) when submitting electronic data for inclusion on the GSA Advantage! website.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 49 of 204

ATTACHMENT A

495

52.202-1 DEFINITIONS (JUN 2020)
When a solicitation provision or contract clause uses a word or term that is defined in the Federal Acquisition Regulation (FAR), the word or term has the same meaning as the definition in FAR 2.101 in effect at the time the solicitation was issued, unless-
(a) The solicitation, or amended solicitation, provides a different definition; (b) The contracting parties agree to a different definition; (c) The part, subpart, or section of the FAR where the provision or clause is prescribed provides a different meaning;
(d) The word or term is defined in FAR part 31, for use in the cost principles and procedures; or (e) The word or term defines an acquisition-related threshold, and if the threshold is adjusted for inflation as set forth in FAR 1.109(a), then the changed threshold applies throughout the remaining term of the contract, unless there is a subsequent threshold adjustment; see FAR 1.109(d).

52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission Outside the United States (MaY 2020)
(a) Definitions. As used in this clause--
Chief of mission means the principal officer in charge of a diplomatic mission of the United States or of a United States office abroad which is designated by the Secretary of State as diplomatic in nature, including any individual assigned under section 502(c) of the Foreign Service Act of 1980 (Pub. L. 96-465) to be temporarily in charge of such a mission or office.

Combatant commander means the commander of a unified or specified combatant command established in accordance with 10 U.S.C. 161. Designated operational area means a geographic area designated by the combatant commander or subordinate joint force commander for the conduct or support of specified military operations.

Supporting a diplomatic or consular mission means performing outside the United States under a contract administered by Federal agency personnel who are subject to the direction of a chief of mission.
(b) General
.
(1) This clause applies when Contractor personnel are required to perform outside the United States--
(i) In a designated operational area during--
(A) Contingency operations;
(B) Humanitarian or peacekeeping operations; or
(C) Other military operations; or military exercises, when designated by the Combatant Commander; or
(ii) When supporting a diplomatic or consular mission-- Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 50 of 204

ATTACHMENT A

496
(A) That has been designated by the Department of State as a danger pay post (see https://aoprals.state.gov/); or
(B) That the Contracting Officer has indicated is subject to this clause. (2) Contract performance may require work in dangerous or austere conditions. Except as otherwise provided in the contract, the Contractor accepts the risks associated with required contract performance in such operations.
(3) Contractor personnel are civilians.
(i) Except as provided in paragraph (b)(3)(ii) of this clause, and in accordance with paragraph (i)(3) of this clause, Contractor personnel are only authorized to use deadly force in self-defense.
(ii) Contractor personnel performing security functions are also authorized to use deadly force when use of such force reasonably appears necessary to execute their security mission to protect assets/persons, consistent with the terms and conditions contained in the contract or with their job description and terms of employment. (4) Service performed by Contractor personnel subject to this clause is not active duty or service under 38 U.S.C. 106 note.
(c) Support. Unless specified elsewhere in the contract, the Contractor is responsible for all logistical and security support required for Contractor personnel engaged in this contract. (d) Compliance with laws and regulations. The Contractor shall comply with, and shall ensure that its personnel in the designated operational area or supporting the diplomatic or consular mission are familiar with and comply with, all applicable--
(1) United States, host country, and third country national laws; (2) Treaties and international agreements;
(3) United States regulations, directives, instructions, policies, and procedures; and (4) Force protection, security, health, or safety orders, directives, and instructions issued by the Chief of Mission or the Combatant Commander; however, only the Contracting Officer is authorized to modify the terms and conditions of the contract. (e) Preliminary personnel requirements.
(1) Specific requirements for paragraphs (e)(2)(i) through (e)(2)(vi) of this clause will be set forth in the statement of work, or elsewhere in the contract. (2) Before Contractor personnel depart from the United States or a third country, and before Contractor personnel residing in the host country begin contract performance in the designated operational area or supporting the diplomatic or consular mission, the Contractor shall ensure the following:
(i) All required security and background checks are complete and acceptable. (ii) All personnel are medically and physically fit and have received all required vaccinations.
(iii) All personnel have all necessary passports, visas, entry permits, and other documents required for Contractor personnel to enter and exit the foreign country, including those Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 51 of 204

ATTACHMENT A

497
required for in-transit countries.
(iv) All personnel have received--
(A) A country clearance or special area clearance, if required by the chief of mission; and
(B) Theater clearance, if required by the Combatant Commander. (v) All personnel have received personal security training. The training must at a minimum--
(A) Cover safety and security issues facing employees overseas; (B) Identify safety and security contingency planning activities; and (C) Identify ways to utilize safety and security personnel and other resources appropriately.
(vi) All personnel have received isolated personnel training, if specified in the contract.

Isolated personnel are military or civilian personnel separated from their unit or organization in an environment requiring them to survive, evade, or escape while awaiting rescue or recovery.
(vii) All personnel who are U.S. citizens are registered with the U.S. Embassy or Consulate with jurisdiction over the area of operations on-line at http://www.travel.state.gov.
(3) The Contractor shall notify all personnel who are not a host country national or ordinarily resident in the host country that--
(i) If this contract is with the Department of Defense, or the contract relates to supporting the mission of the Department of Defense outside the United States, such employees, and dependents residing with such employees, who engage in conduct outside the United States that would constitute an offense punishable by imprisonment for more than one year if the conduct had been engaged in within the special maritime and territorial jurisdiction of the United States, may potentially be subject to the criminal jurisdiction of the United States (see the Military Extraterritorial Jurisdiction Act of 2000 (18 U.S.C. 3261 et seq.);
(ii) Pursuant to the War Crimes Act, 18 U.S.C. 2441, Federal criminal jurisdiction also extends to conduct that is determined to constitute a war crime when committed by a civilian national of the United States; and
(iii) Other laws may provide for prosecution of U.S. nationals who commit offenses on the premises of United States diplomatic, consular, military or other United States Government missions outside the United States (18 U.S.C. 7(9)). (f) Processing and departure points. The Contractor shall require its personnel who are arriving from outside the area of performance to perform in the designated operational area or supporting the diplomatic or consular mission to--
(1) Process through the departure center designated in the contract or complete another process as directed by the Contracting Officer;
(2) Use a specific point of departure and transportation mode as directed by the Contracting Officer; and
Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 52 of 204

ATTACHMENT A

498
(3) Process through a reception center as designated by the Contracting Officer upon arrival at the place of performance.
(g) Personnel data.
(1) Unless personnel data requirements are otherwise specified in the contract, the Contractor shall establish and maintain with the designated Government official a current list of all Contractor personnel in the areas of performance. The Contracting Officer will inform the Contractor of the Government official designated to receive this data and the appropriate system to use for this effort.
(2) The Contractor shall ensure that all employees on this list have a current record of emergency data, for notification of next of kin, on file with both the Contractor and the designated Government official.
(h) Contractor personnel. The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor personnel who fail to comply with or violate applicable requirements of this contract. Such action may be taken at the Government's discretion without prejudice to its rights under any other provision of this contract, including termination for default or cause.
(i) Weapons.
(1) If the Contracting Officer, subject to the approval of the Combatant Commander or the Chief of Mission, authorizes the carrying of weapons--
(i) The Contracting Officer may authorize an approved Contractor to issue Contractor-owned weapons and ammunition to specified employees; or (ii) The To be determined at the task order level [
Contracting Officer to specify
individual, e.g., Contracting Officer Representative, Regional Security Officer, etc,] may issue Government-furnished weapons and ammunition to the Contractor for issuance to specified Contractor employees.
(2) The Contractor shall provide to the Contracting Officer a specific list of personnel for whom authorization to carry a weapon is requested.
(3) The Contractor shall ensure that its personnel who are authorized to carry weapons-- (i) Are adequately trained to carry and use them--
(A) Safely;
(B) With full understanding of, and adherence to, the rules of the use of force issued by the Combatant Commander or the Chief of Mission; and (C) In compliance with applicable agency policies, agreements, rules, regulations, and other applicable law;
(ii) Are not barred from possession of a firearm by 18 U.S.C. 922; and (iii) Adhere to all guidance and orders issued by the Combatant Commander or the Chief of Mission regarding possession, use, safety, and accountability of weapons and ammunition.
(4) Upon revocation by the Contracting Officer of the Contractor's authorization to possess weapons, the Contractor shall ensure that all Government-furnished weapons and unexpended Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 53 of 204

ATTACHMENT A

499
ammunition are returned as directed by the Contracting Officer. (5) Whether or not weapons are Government-furnished, all liability for the use of any weapon by Contractor personnel rests solely with the Contractor and the Contractor employee using such weapon.
(j) Vehicle or equipment licenses
. Contractor personnel shall possess the required licenses to operate all vehicles or equipment necessary to perform the contract in the area of performance. (k) Military clothing and protective equipment.
(1) Contractor personnel are prohibited from wearing military clothing unless specifically authorized by the Combatant Commander. If authorized to wear military clothing, Contractor personnel must wear distinctive patches, armbands, nametags, or headgear, in order to be distinguishable from military personnel, consistent with force protection measures. (2) Contractor personnel may wear specific items required for safety and security, such as ballistic, nuclear, biological, or chemical protective equipment. (l) Evacuation.
(1) If the Chief of Mission or Combatant Commander orders a mandatory evacuation of some or all personnel, the Government will provide to United States and third country national Contractor personnel the level of assistance provided to private United States citizens. (2) In the event of a non-mandatory evacuation order, the Contractor shall maintain personnel on location sufficient to meet contractual obligations unless instructed to evacuate by the Contracting Officer.
(m) Personnel recovery
.
(1) In the case of isolated, missing, detained, captured or abducted Contractor personnel, the Government will assist in personnel recovery actions.
(2) Personnel recovery may occur through military action, action by non-governmental organizations, other Government-approved action, diplomatic initiatives, or through any combination of these options.
(3) The Department of Defense has primary responsibility for recovering DoD contract service employees and, when requested, will provide personnel recovery support to other agencies in accordance with DoD Directive 2310.2, Personnel Recovery. (n) Notification and return of personal effects.
(1) The Contractor shall be responsible for notification of the employee-designated next of kin, and notification as soon as possible to the U.S. Consul responsible for the area in which the event occurred, if the employee--
(i) Dies;
(ii) Requires evacuation due to an injury; or
(iii) Is isolated, missing, detained, captured, or abducted. (2) The Contractor shall also be responsible for the return of all personal effects of deceased or missing Contractor personnel, if appropriate, to next of kin.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 54 of 204

ATTACHMENT A

500
(o) Mortuary affairs. Mortuary affairs for Contractor personnel who die in the area of performance will be handled as follows:
(1) If this contract was awarded by DoD, the remains of Contractor personnel will be handled in accordance with DoD Directive 1300.22, Mortuary Affairs Policy. (2) (i) If this contract was awarded by an agency other than DoD, the Contractor is responsible for the return of the remains of Contractor personnel from the point of identification of the remains to the location specified by the employee or next of kin, as applicable, except as provided in paragraph (o)(2)(ii) of this clause. (ii) In accordance with 10 U.S.C. 1486, the Department of Defense may provide, on a reimbursable basis, mortuary support for the disposition of remains and personal effects of all U.S. citizens upon the request of the Department of State. (p) Changes
. In addition to the changes otherwise authorized by the Changes clause of this contract, the Contracting Officer may, at any time, by written order identified as a change order, make changes in place of performance or Government-furnished facilities, equipment, material, services, or site. Any change order issued in accordance with this paragraph shall be subject to the provisions of the Changes clause of this contract.
(q) Subcontracts. The Contractor shall incorporate the substance of this clause, including this paragraph (q), in all subcontracts that require subcontractor personnel to perform outside the United States-- (1) In a designated operational area during--
(i) Contingency operations;
(ii) Humanitarian or peacekeeping operations;or
(iii) Other military operations; or military exercises, when designated by the Combatant Commander; or
(2) When supporting a diplomatic or consular mission--
(i) That has been designated by the Department of State as a danger pay post (see https://aoprals.state.gov/);or
(ii) That the Contracting Officer has indicated is subject to this clause.

52.216-18 ORDERING (AUG 2020)
(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from TBD through TBD.
(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) A delivery order or task order is considered “issued” when-- (1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;
(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 55 of 204

ATTACHMENT A

501
(3) If sent electronically, the Government either--
(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or
(ii) Distributes the delivery order or task order via email to the Contractor's email address. (d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.

52.228-3 WORKER’S COMPENSATION INSURANCE (DEFENSE BASE ACT) (JUL 2014)
(a) The Contractor shall
(1) Before commencing performance under this contract, establish provisions to provide for the payment of disability compensation and medical benefits to covered employees and death benefits to their eligible survivors, by purchasing workers’ compensation insurance or qualifying as a self-insurer under the Longshore and Harbor Workers’ Compensation Act ( 33 U.S.C. 932) as
extended by the Defense Base Act (42 U.S.C.1651, etseq.), and continue to maintain provisions to provide such Defense Base Act benefits until contract performance is completed; (2) Within ten days of an employee’s injury or death or from the date the Contractor has knowledge of the injury or death, submit Form LS-202 (Employee’s First Report of Injury or Occupational Illness) to the Department of Labor in accordance with the Longshore and Harbor Workers’ Compensation Act (
33 U.S.C. 930(a), 20 CFR 702.201 to 702.203);
(3) Pay all compensation due for disability or death within the time frames required by the Longshore and Harbor Workers’ Compensation Act (
33 U.S.C. 914, 20 CFR 702.231 and 703.232);
(4) Provide for medical care as required by the Longshore and Harbor Workers’ Compensation Act (
33 U.S.C. 907, 20 CFR 702.402 and 702.419);
(5) If controverting the right to compensation, submit Form LS-207 (Notice of Controversion of Right to Compensation) to the Department of Labor in accordance with the Longshore and Harbor Workers’ Compensation Act (
33 U.S.C. 914(d), 20 CFR 702.251);
(6) Immediately upon making the first payment of compensation in any case, submit Form LS-206 (Payment Of Compensation Without Award) to the Department of Labor in accordance with the Longshore and Harbor Workers’ Compensation Act (
33 U.S.C. 914(c), 20 CFR 702.234);
(7) When payments are suspended or when making the final payment, submit Form LS-208 (Notice of Final Payment or Suspension of Compensation Payments) to the Department of Labor in accordance with the Longshore and Harbor Workers’ Compensation Act ( 33 U.S.C. 914(c) and
(g), 20 CFR 702.234 and 702.235); and
(8) Adhere to all other provisions of the Longshore and Harbor Workers’ Compensation Act as extended by the Defense Base Act, and Department of Labor regulations at 20 CFR Parts 701 to 704.
(b) For additional information on the Longshore and Harbor Workers’ Compensation Act requirements see
http://www.dol.gov/owcp/dlhwc/lsdba.htm.
(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts to which the Defense Base Act applies.
(End of clause)
552.238-80 INDUSTRIAL FUNDING FEE AND SALES REPORTING (JUL 2020)
(a)
Reporting of Federal Supply Schedule Sales. The Contractor shall report all contract sales under this contract as follows:

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 56 of 204

ATTACHMENT A

502
(1) The Contractor shall accurately report the dollar value, in U.S. dollars and rounded to the nearest whole dollar, of all sales under this contract by calendar quarter (January 1-March 31, April 1- June 30, July 1-September 30, and October 1-December 31). The dollar value of a sale is the price paid by the Schedule user for products and services on a Schedule task or delivery order.

The reported contract sales value shall include the Industrial Funding Fee (IFF). The Contractor shall maintain a consistent accounting method of sales reporting, based on the Contractor's established commercial accounting practice. The acceptable points at which sales may be reported include–
(i) Receipt of order;
(ii) Shipment or delivery, as applicable;
(iii) Issuance of an invoice; or
(iv) Payment.
(2) Contract sales shall be reported to Federal Acquisition Services (FAS) within 30 calendar days following the completion of each reporting quarter. The Contractor shall continue to furnish quarterly reports, including “zero” sales, through physical completion of the last outstanding task order or delivery order of the contract.
(3) ) Reportable sales under the contract are those resulting from sales of contract items to authorized users unless the purchase was conducted pursuant to a separate contracting authority such as a Governmentwide Acquisition Contract (GWAC); a separately awarded FAR Part 12, FAR Part 13, FAR Part 14, or FAR Part 15 procurement; or a non-FAR contract. Sales made to state and local governments under Cooperative Purchasing authority shall be counted as reportable sales for IFF purposes.
(4) The Contractor shall electronically report the quarterly dollar value of sales, including “zero” sales, by utilizing the automated reporting system at an Internet website designated by the General Services Administration (GSA)’s Federal Acquisition Service (FAS). Prior to using this automated system, the Contractor shall complete contract registration with the FAS Vendor Support Center (VSC). The website address, as well as registration instructions and reporting procedures, will be provided at the time of award. The Contractor shall report sales separately for each National Stock Number (NSN), Special Item Number (SIN), or sub-item. (5) The Contractor shall convert the total value of sales made in foreign currency to U.S. dollars using the “Treasury Reporting Rates of Exchange” issued by the U.S. Department of Treasury, Financial Management Service. The Contractor shall use the issue of the Treasury report in effect on the last day of the calendar quarter. The report is available from Financial Management Service, International Funds Branch, Telephone: (202) 874-7994, Internet:
http://www.fiscal.treasury.gov/fsreports/rpt/treasRptRateExch/treasRptRateExch_home.htm. (b) The Contractor shall remit the IFF at the rate set by GSA’s FAS. (1) The Contractor shall remit the IFF to FAS in U.S. dollars within 30 calendar days after the end of the reporting quarter; final payment shall be remitted within 30 days after physical completion of the last outstanding task order or delivery order of the contract. (2) The IFF represents a percentage of the total quarterly sales reported. This percentage is set at the discretion of GSA's FAS. GSA's FAS has the unilateral right to change the percentage at any time, but not more than once per year. FAS will provide reasonable notice prior to the effective date of the change. The IFF reimburses FAS for the costs of operating the Federal Supply Schedules Program. FAS recoups its operating costs from ordering activities as set forth in 40 U.S.C. 321: Acquisition Services Fund. Net operating revenues generated by the IFF are also applied to fund initiatives benefitting other authorized FAS programs, in accordance with 40 U.S.C. 321. Offerors must include the IFF in their prices. The fee is included in the award price(s) Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 57 of 204

ATTACHMENT A

503
and reflected in the total amount charged to ordering activities. FAS will post notice of the current IFF at https://srp.fas.gsa.gov/ or successor website as appropriate. (c) Within 60 days of award, an FAS representative will provide the Contractor with specific written procedural instructions on remitting the IFF. FAS reserves the unilateral right to change such instructions from time to time, following notification to the Contractor. (d) Failure to remit the full amount of the IFF within 30 calendar days after the end of the applicable reporting period constitutes a contract debt to the United States Government under the terms of FAR Subpart 32.6. The Government may exercise all rights under the Debt Collection Improvement Act of 1996, including withholding or setting off payments and interest on the debt (see FAR clause

52.232-17, Interest). Should the Contractor fail to submit the required sales reports, falsify them, or fail to timely pay the IFF, this is sufficient cause for the Government to terminate the contract for cause.

End of Clause
Note: Regulation 552.238-80
FSS contractors are required to report sales and remit IFF for Schedule items sold via FedMall, just as they would for any other Schedule sale. FedMall sales of Schedule items are treated no differently than sales earned via GSA Advantage! or from orders directly placed by an ordering activity.

This clause does not apply to contracts participating in the Transactional Data Reporting (TDR) Pilot. Please refer to clause 552.238-80 Alternate I. 552.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2021)
(DEVIATION FAR 52.252-6)
(a) Deviations to FAR clauses. This solicitation or contract identifies any authorized deviation to a Federal Acquisition Regulation (FAR) (48 CFR chapter 1) clause by the addition of “(DEVIATION FAR (clause number))” after the date of the clause.
(b) Deviations to GSAR clauses. This solicitation or contract identifies any authorized deviation to a General Services Administration Acquisition Regulation (GSAR) (48 CFR chapter 5) clause by the addition of “(DEVIATION)” after the date of the clause. (c) “Substantially the same as” clauses. Changes in wording of clauses prescribed for use on a “substantially the same as” basis are not considered deviations. (End of Clause)

52.245-1 GOVERNMENT PROPERTY (SEP 2021)
(a) Definitions. As used in this clause-
Cannibalize means to remove parts from Government property for use or for installation on other Government property.

Contractor-acquired property means property acquired, fabricated, or otherwise provided by the Contractor for performing a contract, and to which the Government has title.

Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 58 of 204

ATTACHMENT A

504
Contractor inventory means-
(1) Any property acquired by and in the possession of a Contractor or subcontractor under a contract for which title is vested in the Government and which exceeds the amounts needed to complete full performance under the entire contract;
(2) Any property that the Government is obligated or has the option to take over under any type of contract, e.g., as a result either of any changes in the specifications or plans thereunder or of the termination of the contract (or subcontract thereunder), before completion of the work, for the convenience or at the option of the Government; and
(3) Government-furnished property that exceeds the amounts needed to complete full performance under the entire contract.

Contractor’s managerial personnelmeans the Contractor’s directors, officers, managers, superintendents, or equivalent representatives who have supervision or direction of- (1) All or substantially all of the Contractor’s business; (2) All or substantially all of the Contractor’s operation at any one plant or separate location; or (3) A separate and complete major industrial operation.

Demilitarization means rendering a product unusable for, and not restorable to, the purpose for which it was designed or is customarily used.

Discrepancies incident to shipment means any differences (e.g., count or condition) between the items documented to have been shipped and items actually received.

Equipment means a tangible item that is functionally complete for its intended purpose, durable, nonexpendable, and needed for the performance of a contract. Equipment is not intended for sale, and does not ordinarily lose its identity or become a component part of another article when put into use.

Equipment does not include material, real property, special test equipment or special tooling.

Government-furnished property means property in the possession of, or directly acquired by, the Government and subsequently furnished to the Contractor for performance of a contract.

Government-furnished property includes, but is not limited to, spares and property furnished for repair, maintenance, overhaul, or modification. Government-furnished property also includes contractor-acquired property if the contractor-acquired property is a deliverable under a cost contract when accepted by the Government for continued use under the contract.

Government property means all property owned or leased by the Government. Government property includes both Government- furnished and Contractor-acquired property. Government property includes material, equipment, special tooling, special test equipment, and real property. Government property does not include intellectual property and software.

Loss of Government property means unintended, unforeseen or accidental loss, damage or destruction to Government property that reduces the Government’s expected economic benefits of the property. Loss of Government property does not include purposeful destructive testing, obsolescence, normal wear and tear or manufacturing defects. Loss of Government property includes, but is not limited to-
(1) Items that cannot be found after a reasonable search; (2) Theft;
(3) Damage resulting in unexpected harm to property requiring repair to restore the item to Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 59 of 204

ATTACHMENT A

505
usable condition; or
(4) Destruction resulting from incidents that render the item useless for its intended purpose or beyond economical repair.

Material means property that may be consumed or expended during the performance of a contract, component parts of a higher assembly, or items that lose their individual identity through incorporation into an end item. Material does not include equipment, special tooling, special test equipment or real property.

Nonseverable means property that cannot be removed after construction or installation without substantial loss of value or damage to the installed property or to the premises where installed.

Precious metals means silver, gold, platinum, palladium, iridium, osmium, rhodium, and ruthenium.

Production scrap means unusable material resulting from production, engineering, operations and maintenance, repair, and research and development contract activities. Production scrap may have value when re-melted or reprocessed, e.g., textile and metal clippings, borings, and faulty castings and forgings.

Property means all tangible property, both real and personal.

Property Administrator means an authorized representative of the Contracting Officer appointed in accordance with agency procedures, responsible for administering the contract requirements and obligations relating to Government property in the possession of a Contractor.

Property records means the records created and maintained by the contractor in support of its stewardship responsibilities for the management of Government property.

Provide means to furnish, as in Government-furnished property, or to acquire, as in contractor-acquired property.

Real property See Federal Management Regulation 102-71.20 (41 CFR 102-71.20).

Sensitive property means property potentially dangerous to the public safety or security if stolen, lost, or misplaced, or that shall be subject to exceptional physical security, protection, control, and accountability. Examples include weapons, ammunition, explosives, controlled substances, radioactive materials, hazardous materials or wastes, or precious metals.

Unit acquisition cost means-
(1) For Government-furnished property, the dollar value assigned by the Government and identified in the contract; and
(2) For contractor-acquired property, the cost derived from the Contractor’s records that reflect consistently applied generally accepted accounting principles. (b) Property management.
(1) The Contractor shall have a system of internal controls to manage (control, use, preserve, protect, repair, and maintain) Government property in its possession. The system shall be adequate to satisfy the requirements of this clause. In doing so, the Contractor shall initiate and maintain the processes, systems, procedures, records, and methodologies necessary for effective and efficient control of Government property. The Contractor shall disclose any significant changes to its property management system to the Property Administrator prior to implementation of the changes. The Contractor may employ customary commercial practices, voluntary consensus standards, or industry-leading practices Contract Clauses for Solicitation 47QSMD20R0001 Refresh Number 30 Contract Number:
47QTCA25D00DR
Page: 60 of 204

ATTACHMENT A