QTY: 1
ONE ( 1) HANDRAIL, BELOW HOSE BED LEVEL
QTY: 1
One ( 1) horizontal, full width handrail shall be installed on the rear, below the level of the hose bed.
TWO ( 2) 18" HORIZONTAL HANDRAILS REAR TOP OF BODY
QTY: 1
Two ( 2) 18" horizontal handrails shall be provided and installed one ( 1) on each side at rear top of body.
HANDRAIL ABOVE PUMP PANEL, EACH SIDE
Two ( 2) horizontal handrails shall be mounted above each pump panel, ( 1) each side.
INNOVATIVE CONTROLS LIGHTED STEP( S), BODY FRONT, D
QTY: 1
QTY: 1
Innovative Controls large lighted folding step( s), with a textured chrome plate finish, shall be provided on driver side body front to provide NFPA compliant access ( maximum 18" height between steps) to an upper horizontal walking surface ( compartment cap, dunnage area, fabricated step, or upper body compartments).
INNOVATIVE CONTROLS LIGHTED FOLDING STEP( S), BODY
QTY: 1
Innovative Controls large lighted folding step( s), with a textured chrome plate finish, shall be provided on driver side body rear to provide NFPA compliant access ( maximum 18" height between steps) to an upper horizontal walking surface ( compartment cap, dunnage area, fabricated step, or upper body compartments).
INNOVATIVE CONTROLS LIGHTED FOLDING STEP( S), BODY
QTY: 1
Innovative Controls large lighted folding step( s), with a textured chrome plate finish, shall be provided on officer side body rear to provide NFPA compliant access ( maximum 18" height between steps) to an upper horizontal walking surface ( compartment cap, dunnage area, fabricated step, or upper body compartments).
PAINTED REAR TOW EYES, BELOW BODY
QTY: 1
Two ( 2) painted tow eyes shall be furnished on the rear of the vehicle. The tow eyes shall be made from plate steel and shall be bolted directly to the chassis frame rails with grade 8 bolts. The tow eyes will extend below the body. The tow eyes shall be smooth and free from sharp edges. They will have a minimum eyelet hole of 2- 1/ 2". The tow eyes shall be painted.
LOWERED HOSEBED: 42" WIDE
QTY: 1
The hose bed shall be located directly above the booster tank and be free from all sharp objects such as bolts, nuts, and so on, in avoidance of damage to the fire hose. For added strength the hose bed side walls shall be approximately 2" thick, providing a mounting surface for devices such as warning and scene lights. The inner hose bed side walls shall be brushed aluminum panels, which will help prevent damage to painted surfaces when the hose is deployed. The front wall shall be flanged inward 2" with a 1" downward return, providing additional rigidity to the front wall.
NFPA MINIMUM HOSEBED CAPACITY
QTY: 1
The hose bed shall provide a minimum of 30 cubic feet hose storage area for 2- 1/ 2" or larger fire hose in order to meet NFPA- 1901 minimum pumper hose storage requirement. The apparatus weight analysis -98-
Quote # QUO0000007757 ( Rev 1) April 27, 2022 Page 95
shall be based on 800' of 2- 1/ 2" hose, unless otherwise specified. If the hose load carried exceeds this minimum, the purchaser should advise the manufacturer prior to contract so that adequate chassis carrying capacity can be provided.
HOSEBED FLOORING - ALUMINUM SLATS
QTY: 1
Flooring is to be constructed from extruded aluminum and have proper spaces for ventilation purposes.
The flooring shall be smooth and free from sharp edges to avoid any hose damage. The hose bed floor shall be removable, providng access to the inner body framework.
THREE ( 3) - 1/ 4" ADJUSTABLE HOSEBED PARTITIONS
QTY: 1
Three ( 3) fully adjustable 1/ 4" aluminum hose bed partitions shall be provided. The partition shall be easily adjustable by channels, located at the front and rear of the hose bed. The partition shall be removable for access to the booster tank.
HOSEBED BLANK PANEL
QTY: 1
A full width divider shall be installed in the hose bed located approximately 2" beyond the end of the water fill tower.
This divider shall be constructed of smooth aluminum and shall be fixed.
The adjustable hose bed dividers shall be installed up to this divider with the adjustment tracking attached to the fixed divider.
TUBING REINFORCEMENT ON PARTITION( S) - 3/ 4"
QTY: 3
The top and rear edge of each of the hose bed partitions shall have a 3/ 4" integral tubing reinforcement welded on for additional support.
HOSE PARTITION HANDHOLD CUTOUTS [ PER QTY1
The hose bed partition( s) shall have a vertical handhold cutout at upper rear edge of the partition.
HOSEBED COVER - LOCK- N- LOAD SLIDING COVER
QTY: 3
QTY: 1
The top of the hose bed shall have an NFPA compliant cover installed in order to secure the hose from unintentionally deploying from the top or rear. The cover shall be a polished, tread plate with a combination between a roller and lift -up style. The cover shall be strong enough to support 250 pounds over the entirety. The rear half of the cover shall be able to roll over the forward half of the cover on channel tracks and are sealed with ball bearing rollers. When rolled opened, the entire cover shall be capable of being lifted up on a stainless steel piano hinge installed across the front of the body. The cover shall rise no less than 60 degrees in order to load the hose. The cover shall lock when closed. When unlocked the roller portion of the cover shall be capable of rolling forward and lock into the open rolled position. The lift portion shall be assisted and supported by non locking gas shocks and shall be supported by a prop rod to prevent the cover from inadvertently closing. The handles shall be installed on the end of the cover to assist with rolling and lifting. All switches shall be installed on each side of the cover, so that when the cover is opened it indicates which switches shall activate the " Do Not Move Apparatus" warning inside the cab.
An individual hinged access door shall be provided over the water tank fill tower area. This door shall be hinged at the front, preventing the door from opening while the apparatus is in motion. The door shall not latch, so that it allows the door to open in the event of over pressurization in the tank. -99-
Quote # QUO0000007757 ( Rev 1) April 27, 2022 Page 96
VINYL FLAPS AT REAR EDGE OF TREADPLATE COVER
QTY: 1
Two ( 2) vinyl flaps at the rear of the tread plate hose bed cover. They shall be secured to the hose bed cover with quarter turn fasteners and to the rear body with bungee cords.
VINYL MATERIAL COLOR - BLACK
The vinyl material shall be black in color.
HOSEBED STORAGE MODULE
QTY: 1
QTY: 1
A storage module shall be provided in the lower hose bed on the driver side, 12" W x 30" H and full length. This module shall be constructed of brushed aluminum material and shall have storage space for:
The compartment will provide storage for 2 hose bundles 100' 1. 75" ea., hooks, and back board.
A hinged tread plate door shall be installed to cover the entire storage area. The door shall hinge to the officer side of the body and shall be equipped with a sensor tied into the door ajar circuit.
ZICO " DUAL ARM" HYDRAULIC LADDER RACK ( OFFICER SID
QTY: 1
A Ziamatic Quic Lift " Outside Arm Ladder System", a hydraulically actuated, dual arm, swing down ladder rack for use with ladders that have a combined weight of approximately 300 pounds, depending on the boom length, shall be provided. The ladders shall be stored horizontally, directly above the officer side compartments. The ladders shall be lowered and raised by means of dual 8" stroke hydraulic cylinders.
The ladder raising and lowering mechanism requires 7" wide x 10" deep on the inside wall of the forward and rear compartment and requires 4- 1/ 2" wide x 5" deep on the outside wall of the forward and rear compartment. Two (2) 2" x 4" heavy wall booms connect the hydraulic cylinders to the ladder rack. The mechanism that rotates the booms to raise and lower the ladder rack uses bronze bearings for years of trouble free service.
The actuator switch and power on/ off switch for the ladder rack shall be located in the pump panel area in an enclosed housing. This provides the operator full view of the rack during the raising or lowering operation. A warning alarm shall activate when the rack is in motion. The warning alarm shall be installed on the rack side rear body panel. An interlock system shall be provided whereas if any hinged compartment door on the right side of the body is open, the rack shall not operate. A flashing warning light labeled: " Do Not Move Apparatus When Light Is On", shall be provided on the cab dash to indicate when the rack is not in the raised, travel position The forward and rear ends of the ladder rack shall be equipped with red flashing lights, as a warning when the rack is down. These lights shall automatically activate when the rack is not locked in the travel position. Pneumatic power clamps lock booms in the stored position that shall automatically engage when the ladder rack is nested.
DUO -SAFETY 900- A 24' 2- SECTION EXTENSION LADDER
A Duo -Safety series 900-A, 24', aluminum, two ( 2) section extension ladder shall be provided.
DUO -SAFETY 775- A 14' ROOF LADDER W/ FOLDING HOOKS
QTY: 1
QTY: 1
A Duo -Safety series 775- A, 14', aluminum, straight roof ladder with folding hooks shall be provided.
DUO -SAFETY 585- A 10' FOLDING ATTIC LADDER ( ALUM)
A Duo -Safety series 585-A, 10', folding, aluminum, attic ladder shall be provided.
ADJUSTABLE SHELF DESCRIPTION - RESCUE
QTY: 1
-100-
Quote # Q000000007757 ( Rev 1) April 27, 2022 Page 97
QTY: 1
Compartment shelving shall be constructed of 3/ 16" brush finish aluminum with a 2" upward bend at front and rear, and side supports. Shelving shall be vertically adjustable with spring nuts in aluminum strut channel.
Adjustable shelves shall be located as indicated at each compartment description.
ADJUSTABLE SHELF( S) LOCATED L- 1
Located in the left side compartment # 1
ADJUSTABLE SHELF( S) LOCATED L- 1
Located in the left side compartment # 1
ADJUSTABLE SHELF( S) LOCATED L- 2
Located in the left side compartment # 2
ADJUSTABLE SHELF( S) LOCATED L- 3
Located in the left side compartment # 3
ADJUSTABLE SHELF( S) LOCATED R- 1
Located in the right side compartment # 1
ADJUSTABLE SHELF( S) LOCATED R- 3
Located in the right side compartment # 3
250#, FLOOR MOUNTED, ROLLOUT TRAY DESCRIPTION
QTY: 1
QTY: 1
QTY: 1
QTY: 1
QTY: 2
QTY: 1
QTY: 1
Slide out floor mount compartment shelving shall be constructed of 3/ 16" brush finish aluminum with a 2" upward bend at front and rear, and side supports attached to # 250 rated slides. Slide out floor mount shelving shall have gas shocks to hold the tray in and out.
Slide out floor mount shelving shall be as indicated at each compartment description.
ROLLOUT TRAY, LOCATED R- 3
Located in the right side compartment # 3
250# ROLLOUT TRAY, LOCATED REAR COMPARTMENT
Located in the rear compartment
TURTLE TILE MATERIAL ON ALL COMPARTMENT FLOOR
Turtle Tile brand floor material shall be installed on all compartment floors.
The Turtle Tile shall be custom installed to provide full floor coverage.
FLOORING MATERIAL ON SHELF( S) OR TR
QTY: 1
QTY: 1
QTY: 1
QTY: 10
Floor matting material shall be provided on the noted quantity of specified shelves or roll -out trays. -101-
Quote # QUO0000007757 ( Rev 1) April 27, 2022 Page 98
FLOORING MATERIAL COLOR ( BLACK IS DEFAULT)
The compartment flooring color shall be black.
ROLL -OUT/ DROP DOWN ADJUSTABLE TRAY
QTY: 1
QTY: 1
The roll out/tilt tray shall consist of a 3/ 16" brushed aluminum finished aluminum tray with a minimum 2" lip on all four sides. Heavy duty aluminum Unistrut "C" channel tracking material shall be utilized to securely fasten the slide tracks to the compartment walls, while allowing height adjustment.
The rear of the tip down tray shall be mounted on a slider with an integral pivot plate. This slider and pivot plate shall be mounted inside an aluminum rail for maximum strength. The tray shall be released from the stowed position with the use of a push button and shall be capable of auto latching to the stowed position. The front handle/ latch shall be designed with a double hand hold to control the tray when deployed or stowed.
Roll out/ Tilt trays be as indicated at each compartment description.
ROLLOUT DROP DOWN TRAY, LOCATED R- 2
Located in the right side compartment # 2
GENERAL PAINT DESCRIPTION
QTY: 1
QTY: 1
The apparatus body shall be painted with Sikkens paint product. The paint process shall meet or exceed current state regulations concerning paint operations. Pollution control shall include measures to protect the atmosphere, water, and soil. Contractor shall, upon demand, provide evidence that the manufacturing facility is in compliance with State EPA rules and regulations.
The exterior shall have no mounted components prior to painting to assure full coverage of metal treatments and paint to the exterior surfaces of the body. Any vertically or horizontally hinged smooth - plate compartment doors shall be painted separately to assure proper paint coverage on body, door jambs and door edges.
Paint process shall feature Sikkens high solid LV products and be performed in the following steps:
Corrosion Prevention - all aluminum surfaces shall be pre- treated with the Alodine 5700 conversion coating to provide superior corrosion resistance and excellent adhesion of the base coat.
Sikkens Sealer/ Primer LV - acrylic urethane sealer/ primer shall be applied to guarantee excellent gloss hold -out, chip resistance and a uniform base color.
Sikkens High Solid LVBT650 ( Base coat) - a lead- free, chromate - free high solid acrylic urethane base coat shall be applied, providing excellent coverage and durability. A minimum of two ( 2) coats shall be applied.
Sikkens High Solid LVBT650 ( Clear coat) - high solid LV clear coat shall be applied as the final step in order to ensure full gloss and color retention and durability. A minimum of two ( 2) coats shall be applied.
Any location where the material is penetrated after painting, for the purpose of mounting steps, hand rails, doors, lights, or other specified components shall be treated at the point of penetration with a corrosion inhibiting pre- treatment ( ECK Corrosion Control). The pre- treatment shall be applied to the aluminum sheet metal or aluminum extrusions in all locations where the aluminum has been penetrated. All -102-
Quote # QU00000007757 ( Rev 1) April 27, 2022 Page 99
hardware used in mounting steps, hand rails, doors, lights, or other specified components shall be individually treated with the corrosion inhibiting pre- treatment.
After the paint process is complete, the gloss rating of the unit shall be tested with a 20 degree gloss meter. Coating thickness shall be measured with a digital MIL gauge and the orange peel with a digital wave scan device.
GENERAL PRIMER & PREP DESCRIPTION
All exposed welds shall be ground smooth for final finishing of areas to be painted.
The compartments and doors are totally degreased and phosphatized.
After final body work is completed, grinding ( 36 and 80 grit), and finish sanding shall be used in preparation for priming.
GENERAL FINISH PAINT DESCRIPTION
The body shall be finish sanded and prepared for final paint.
QTY: 1
QTY: 1
Upon completion of final preparation, the body shall be painted utilizing the highest quality, state of the art, low V.O. C., polyurethane base paint.
Finish paint shall be applied in multiple coats to ensure proper paint coverage with a high gloss finish.
FINISH PAINT & PREP
The applicable areas of the cab shall be finish sanded and prepared for final paint.
Upon completion of final preparation, the cab shall be painted utilizing the highest quality, state of the art, low V.O. C., polyurethane base paint.
Finish paint shall be applied in multiple coats to ensure proper paint coverage with a high gloss finish.
CAB PRIMER & PREP
QTY: 1
The cab primer shall be a two ( 2) stage process.
QTY: 1
First stage shall be a coating with a two part component, self etching, and corrosion resistant primer to chemically bond the surface of the metal for increased adhesion.
Second stage shall be multiple coats of a catalyzed, two component, polyurethane primer applied for leveling of small imperfections and top coat sealing.
CAB UNDERSIDE PAINT - JOB COLOR
QTY: 1
The exposed areas under the cab shall be painted job color to match the exterior cab.
On two tone cabs, this shall match the primary color.
CAB BUFFING & FINISH
QTY: 1
The exposed exterior finish of the cab shall be buffed and detailed.
CAB INTERIOR PAINT
QTY: 1
-103-
Quote # QU00000007757 ( Rev 1) April 27, 2022 Page 100
The exposed interior metal surfaces of the cab shall be finish painted with a textured gray paint.
BODY BUFFING & FINISH
The visable and exposed areas of the body shall be buffed and detailed.
INSIDE/ UNDERSIDE BODY PAINT
QTY: 1
QTY: 1
The inside and underside of the complete body assembly shall be painted job color using a Sikkens paint system, prior to installation of the body on the chassis or torque box.
COMPARTMENT INTERIOR FINISH
The interior of the aluminum body compartments shall have an unpainted " DA" finish inside.
All seams shall be caulked with a clear silicone type caulking.
FENDER COMPARTMENT INTERIOR
QTY: 1
QTY: 1
The interior of the fender storage compartments ( if fender compartments are specified) shall be finish painted job color.
CAB PAINT SCHEME - TBD
QTY: 1
The cab exterior shall be finish painted with Sikkens paint system, single color, to match purchaser' s furnished paint code.
PUMP PAINTED / UNPAINTED PLUMBING
QTY: 1
The pump shall be painted per the pump manufacturer' s standard. The stainless steel plumbing will remain unpainted. The pump area interior will match the body underside finish as described elsewhere in these specifications.
SINGLE COLOR BODY PAINT SCHEME - TBD
QTY: 1
The body paint finish shall be Sikkens paint system in a single color to match customer furnished paint codes and requirements.
PINT OF TOUCH- UP PAINT
QTY: 1
One ( 1) pint of each exterior color paint for touch- up purposes shall be supplied when the apparatus is delivered to the end user.
FINALIZATION & DETAILING
QTY: 1
Prior to delivery the vehicle, the interior and exterior be cleaned and detailed.
The finalization process detailing shall include installation of NFPA required labels, checking fluid levels, sealing and caulking required areas of the cab and body, rust proofing, paint touch- up, etc
FRAME RAIL FINISH
QTY: 1
The chassis frame rails, suspension, axles, and drivelines ( with the exception of any PTO drivelines which shall be safety yellow) shall be painted black with a polyurethane base paint prior to installation of any air lines or electric systems to ensure proper serviceability. -104-
Quote # Q000000007757 ( Rev 1) April 27, 2022 Page 101
SCOTCH- LITE STRIPE
QTY: 1
A six ( 6) inch high " Scotch- Lite" stripe shall be provided.
The stripe shall be applied on a minimum of 60 percent of each side of the unit, 60 percent on the rear of the unit and 40 percent on the front of the unit.
The Scotch- Lite stripe layout shall be determined by the Fire Department.
WHITE SCOTCH- LITE
QTY: 1
The Scotch- Lite shall be white in color.
DUAL 1" SCOTCH- LITE ACCENT ON MAIN STRIPE
QTY: 1
A 1" high Scotch- Lite material accent stripe shall be incorporated into the Scotch- Lite scheme to border the primary Scotch- Lite stripe on the top and bottom edges.
Final layout of this configuration shall be determined by the Fire Department.
REAR CHEVRON STRIPING
REAR CHEVRON STRIPING
ENTIRE REAR
The entire rear of the truck shall be covered with alternating strips of reflective striping. 6" FULL REAR ORALITE CHEVRON STRIPING
The striping shall be 6" Oralite reflective striping.
RED & YELLOW ORALITE V98
The Oralite V98 reflective tape shall be # 12 red and # 18 yellow in color.
MISCELLANEOUS EQUIPMENT
The following equipment shall be mounted as specified or as loose equipment provided with the completed apparatus at the time of delivery:
ROAD SAFETY KITS
A road safety kit shall be furnished with the following equipment:
2 1/ 2 Ib. B- C fire extinguisher
Triangle safety reflectors.
SCBA CYLINDER STORAGE
A Zico SCBA bottle brackets mounted as directed by the fire department.
HANDLIGHT/ S
QTY: 1
QTY: 1
QTY: 1
QTY: 1
QTY: 1
QTY: 1
QTY: 3
QTY: 2
-105-
Quote # Q000000007757 ( Rev 1) April 27, 2022 Page 102
A Streamlight model 44451 orange " Fire Vulcan" C4 LED rechargeable hand light(s) and 12 volt charger shall be installed as directed by the purchaser.
Charger shall be wired to the chassis battery system.
WHEEL CHOCKS
QTY: 1
Two ( 2) ZICO # SAC- 44 folding wheel chocks shall be mounted forward of the rear wheels on the driver side below the side running board compartments.
KME WARRANTY, STARTING ON IN- SERVICE DATE
QTY: 1
Warranty coverage by KME will begin when the customer places the unit in service. This date may not exceed 60 days from the date of delivery to the customer.
The Customer must email kmeservice@kmefire. com within 60 days of delivery, or the warranty start date will default to the original delivery date.
GENERAL TWO ( 2) YEAR WARRANTY
QTY: 1
Purchaser shall receive a General Two ( 2) Years or 36, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0002. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
REGULATED EMISSIONS SYSTEMS FIVE ( 5) YEARS OR CARB
QTY: 1
Purchaser shall receive a Regulated Emissions Systems Five ( 5) Years or CARB Mileage limited warranty in accordance with, and subject to, warranty certificate RFW0140. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
ELECTRICAL ONE ( 1) YEAR WARRANTY
QTY: 1
Purchaser shall receive a Electrical One ( 1) Year or 18, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0201. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
FRAME ASSEMBLY STRUCTURAL TWENTY ( 20) YEAR WTY
QTY: 1
Purchaser shall receive a Frame Assembly Structural Twenty ( 20) Years or 100, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0304. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
FRAME RAIL CORROSION ( PAINTED) THREE ( 3) YEAR WTY
QTY: 1
Purchaser shall receive a Frame Rail Corrosion ( Painted) Three ( 3) Years or 48, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0310. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
BODY STRUCTURE ( ALUMINUM) TEN ( 10) YEAR WARRANTY
QTY: 1
Purchaser shall receive a Body Structure (Aluminum) Ten ( 10) Years or 100, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0502. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
PAINT AND FINISH ( EXTERIOR CLEAR COATED) WARRANTY
QTY: 1
-106-
Quote # Q000000007757 ( Rev 1) April 27, 2022 Page 103
Purchaser shall receive a Paint and Finish ( Exterior Clear coated) Seven ( 7) Years limited warranty in accordance with, and subject to, warranty certificate RFW0707. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
PLUMBING AND PIPING ( STAINLESS STEEL) WARRANTY
QTY: 1
Purchaser shall receive a Plumbing and Piping ( Stainless Steel) Ten ( 10) Years or 100, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0800. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
PLUMBING AND PIPING CORROSION -FREE WARRANTY
QTY: 1
Purchaser shall receive a Plumbing and Piping Corrosion -Free ( Stainless Steel) Ten ( 10) Years or 100, 000 Miles limited warranty in accordance with, and subject to, warranty certificate RFW0801. The warranty certificate is incorporated by reference into this proposal, and included with this proposal or available upon request.
5 YEAR CUMMINS BASE WARRANTY
QTY: 1
The proposed unit will be equipped with a Fire Service rated engine, which will come furnished with a five 5) year Engine Manufacturer' s warranty. A copy of the manufacturer' s warranty will be supplied to define additional details of the warranty provisions.
5 YEAR ALLISON EVS TRANSMISSION WARRANTY
QTY: 1
The proposed Allison transmission will be provided with a five ( 5) year warranty. A copy of the Allison transmission warranty will be supplied to the purchaser to define additional details of the warranty provisions.
3 YEAR COOLING SYSTEM WARRANTY - CUSTOM
QTY: 1
Kovatch Mobile Equipment ( KME) warrants all Cooling System Equipment components used in the construction of KME Fire Apparatus against defects and workmanship provided the apparatus is used in a normal and reasonable manner. This warranty is extended only to the original user -purchaser for a period of three ( 3) years from the date of delivery/ acceptance to the original user -purchaser, whichever occurs first.
This warranty applies to both purchased and fabricated, manufacturer supplied coolant system components and is not provided in lieu of any Vendor provided warranties. All coolant system components provided by the engine manufacturer are covered by the engine manufacturer' s warranty only.
SHEPPARD STEERING GEAR STANDARD - WARRANTY
QTY: 1
The proposed Sheppard steering gear will be warranted for a period of three ( 3) years from the first date of service or 150, 000 miles ( 241, 401 kilometers), whichever occurs first. The product will be free from defects in material and workmanship under normal use in applications approved in advance by Sheppard. 5 YEAR MERITOR 180 SERIES TANDEM AXLE REAR
QTY: 1
The Meritor axle/ s shall be provided with a five ( 5) year warranty. The first two ( 2) years shall be parts and labor; the remaining three ( 3) years shall be parts only. Wheel seals, gaskets and wheel bearings shall be covered for one year. A copy of Meritor' s warranty shall be supplied to define additional details of the warranty provisions. Vehicles that operate full or part- time outside the United States and Canada shall have a one ( 1) year, parts only warranty.
-107-
Quote # QUO0000007757 ( Rev 1) April 27, 2022 Page 104
3 YEAR MERITOR ABS - WARRANTY
QTY: 1
The Meritor ABS shall be provided with a three ( 3) year warranty, parts and labor. A copy of Meritor' s warranty shall be supplied to define additional details of the warranty provisions. Vehicles that operate full or part- time outside the United States and Canada shall have a one ( 1) year, parts only warranty. 5 YEAR LETTERING WARRANTY
QTY: 1
The apparatus manufacturer will provide a five ( 5) year warranty against defects in material and workmanship for all graphics processes. Any valid claims must be made in writing within 15 days of the determination of any defects to the manufacturer' s fire apparatus. The manufacturer will at its option make any necessary repairs either at a local authorized service center or at the factory if required. The manufacturer will make the final decision as to where the repairs are to be made and any transportation cost is the owner' s responsibility. The manufacturer will at its option, repair or replace any verified defects in workmanship or materials at no cost to the owner provided all the requirements of this warranty have been met.
The manufacturer will not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, downtime, loss of use or inconvenience. THE COMPANY MAKES NO OTHER WARRANTY, EXPRESSED OF IMPLIED,
AND SPECIFICALLY, DISCLAIMS ANY IMPLIED WARRANTY INCLUDING THE WARRANTY OF MERCHANTABILITY.
The manufacturer continually strives to improve its products and therefore, reserves the right to make improvements or changes without incurring any obligations to make such changes or additions to equipment previously sold.
1 YEAR BRIGHTWORK WARRANTY
QTY: 1
KME Fire Apparatus ( KME) warrants all bright finish components used in the construction of KME Fire Apparatus against defects and workmanship provided the apparatus is used in a normal and reasonable manner. This warranty is extended only to the original user -purchaser for a period of one ( 1) year from the date of delivery/ acceptance to the original user -purchaser, whichever occurs first.
The expressed warranty excludes corrosion or degradation of bright finished components caused by damage to the component.
FRONT SUSPENSION - STEERTEK - 5 YEAR WARRANTY
QTY: 1
The Hendrickson Steertek NXT front axle shall be provided with a five ( 5) year parts and labor warranty and shall include the axle and kingpin assembly, the steering arm assembly, and the upper and lower steering knuckle assembly.
The warranty for the integrated suspension components shall be two ( 2) years or two hundred fifty thousand ( 250, 000) miles, whichever occurs first.
The integrated suspension components covered under this two year warranty are limited to:
Front Frame Hanger Assemblies
Rear Shackle Assemblies
Jounce Stop Assemblies
Rear Frame Hanger Assemblies
Shock Absorbers
Shock Absorber Brackets
-108-
Quote # QUO0000007757 ( Rev 1)
Leaf Spring Assemblies
April 27, 2022 Page 105
A copy of the Hendrickson Steertek NXT Warranty shall be provided to define additional details of the warranty provisions.
HENDRICKSON AIR RIDE - SGL AXLE - THREE YEAR
QTY: 1
Hendrickson warrants suspension products manufactured by it to be free from defects in material and workmanship which occur under normal use and service for a period of three( 3) years ( base year + 2 years).
This warranty will not apply and no warranty of any kind will exist as to any product which has been subject to abuse, misuse, neglect, misapplication or accident of any type or cause or which has been repaired, replaced, substituted or used with parts other than genuine Hendrickson parts or altered by anyone.
LIFETIME POLY TANK WARRANTY - ALL TANKS
QTY: 1
The proposed water tank will be warranted by the water tank manufacturer for the " Lifetime" of the unit. A copy of the manufacturer' s warranty will be supplied to define additional details of the warranty provisions.
WATEROUS 7 YEAR PUMP WARRANTY PARTS ONLY
QTY: 1
Waterous warrants, to the original Buyer only, that products manufactured by Waterous shall be free from defects in material and workmanship under normal use and service for a period of seven ( 7) years from the date the product is first placed in service or seven and one- half ( 7 1/ 2) years from the date of shipment by Waterous, whichever period shall be the first to expire; provided the buyer notifies Waterous, in writing, of the defect in said product within the warranty period, and said product is found by Waterous to be nonconforming with the aforesaid warranty.
FOAM PRO 2000 SERIES STANDARD WARRANTY
QTY: 1
The liability of FoamPro under the foregoing warranty will be limited to the repair or replacement at FoamPro' s option without charge for labor or materials of any parts upon return of the entire pump, system or other product or of the particular part to the FoamPro factory within the warranty period, at the sole expense of the purchaser, which part will upon examination appear to FoamPro' s satisfaction to have been defective in material and workmanship.
AKRON - 5 YEAR LIMITED WARRANTY
QTY: 1
The limited warranty set forth here against defective materials or workmanship for a period of five ( 5) years will be given by Akron Brass Co. with respect to Akron Brass Co. products purchased and used in the United States and Canada respectively. All Akron valves are warranted for 10 years.
CLASS 1 - ELECTRICAL PRODUCT WARRANTY
QTY: 1
Class 1 warrants that any equipment of our own manufacture ( or manufactured for us pursuant to our specifications) found to have defects in material or workmanship during normal use and service, will be repaired or replaced ( at our option) free of charge, provided that written notice of such defect is received by us within two years ( three for liquid -filled gauges) after initial shipment.
All equipment requiring repair or replacement under this warranty will be returned prepaid to Class 1.
Such returned equipment will be examined by us and, if found to be defective as a result of materials failure or workmanship, will be repaired or replaced at no charge.
BOSTROM SEATING 5 YEAR WARRANTY
-109-
Quote # QU00000007757 ( Rev 1) April 27, 2022 Page 106
QTY: 1
H. O. Bostrom will warrant each new seat manufactured, to be free from defects in materials and workmanship when delivered to the original purchaser for a period of five ( 5) years.
Labor to remove or reinstall and transportation of defective items will not be covered by, or any allowance made for the said cost under this warranty.
CORROSION TREATMENT
QTY: 1
Upon apparatus completion, underside of the apparatus, from the pump enclosure - back, shall have anti corrosion film applied to help inhibit rust and the corrosion process. The semi -firm wax film shall be applied by air spray method. The film shall be applied as a minimum to the following areas: body substructure, underside of all body compartments, running board supports and rear step supports. No film shall be applied directly to the exhaust system or wheel wells.
NOTE: The film shall remain semi -firm to promote self-sealing. The film may leave a light tinted color to those areas treated.
ADDITIONAL ITEMS SHIPPED WITH VEHICLE
1 - Bag of assorted stainless steel nuts and bolts
VEHICLE CLASS TIER 0
QTY: 1
QTY: 1
-110-
DATE:
FROM:
PREPARED BY:
STAFF REPORT
TO THE CITY COUNCIL
May 10, 2022
Joseph A. Hughes, City Manager
Betty Hughes, MMC, City Clerk
SUBJECT: City Manager Report and Comments
Work Program, Regional/ Legislative/ Development Issues, Subcommittees, etc.)
RECOMMENDATION: Discussion and possible action.
Approved Motion Second Agenda Item No. r
Denied Ayes
Continued Noes File No.
Tabled Abstain
Absent
City Clerk / City Manager
-1-
DATE:
FROM:
PREPARED BY:
SUBJECT:
STAFF REPORT
TO THE CITY COUNCIL
May 10, 2022
Joseph A. Hughes, City Manager
Betty Hughes, MMC, City Clerk
Council Member Comments
Agency/ Committee/ AB1234 Reports, District Updates, etc.) RECOMMENDATION: Discussion and possible action.
Approved Motion Second Agenda Item No. ` g
Denied Ayes
Continued Noes File No.
Tabled Abstain
Absent
City Clerk City Manager
-1-