Staff Report - Cooperative Purchase Contract - Replacement Fire Apparatus [Published for 10-day Review 06-09-2022] — Sacramento City Council, June 21, 2022 (part 3 of 4)

WHAT IS NOT COVERED
 DAMAGE DUE TO ACCIDENT, MISUSE, or ALTERATION — Defects and damage caused as the result of any of the following are not covered:
— Flood, collision, fire, theft, freezing, vandalism, riot, explosion, or objects striking the vehicle; — Misuse of the vehicle;
— Installation into unapproved a pplications and installations; — Alterations or modification of th e transmission or the vehicle, and — Damage resulting from improper storage (refer to long-term st orage procedure outlined in the applicable Allison Service Manual) — Anything other than defects in Allison Transmission material or workmanship NOTE: This warranty is void on transmissions used in vehicles currently or previously titled as salvaged, scrapped, junked, or totale d.  CHASSIS, BODY, and COMPONENTS — The chassis and body company (assemblers) and other component and equipment manufacturers are solely responsible for warranties on the chassis, body, component(s), and equipment they provide. Any transmission repair caused by an alteration(s) made to the Allison transmission or the vehicle which allows the transmission to be installed or operated outside of the limits defined in the appropriate Allison Installation Guideline is solely the responsibility of the entity making the alteration(s).  DAMAGE CAUSED by LACK of MAINTENANCE or by th e USE of TRANSMISSION FLUIDS NOT RECOMMENDED in the OPERATOR’S MANUAL — Defects and damage caused by any of the following are not covered:
— Failure to follow the recommendations of the maintena nce schedule intervals applicable to the transmission; — Failure to use transmission fluids or maintain transm ission fluid levels recommended in the Operator’s Manual.  MAINTENANCE — Normal maintenance (such as replacement of filters, screens, and transmission fluid) is not covered and is the owner’s responsibility.
 REPAIRS by UNAUTHORIZED DEALERS — Defects and damage caused by a service outlet that is not an authorized Allison Transmission Distributor or Dealer are not covered.
 USE of OTHER THAN GENUINE ALLISON TRANSMISSION PARTS — Defects and damage caused by the use of parts that are not genuine Allison Transmission parts are not covered.  EXTRA EXPENSES — Economic loss and extra expenses are not covered. Examples include but are not limited to: loss of vehicle use; inconvenience; storage; payment for loss of time or pay; vehicle rental expense; lodging; meals; or other travel costs.  “DENIED PARTY” OWNERSHIP — Warranty repair parts and labor costs are not reimbursed to any participating or non-participating OEMs, dealers or distributors who perform warranty work for, or on behalf of, end users identified by the United States as being a “denied party” or who are citizens of sanctioned or embargoed countries as defined by the U.S. Department of Treasury Office of Foreign Assets Control. Furthermore, warranty reimbursements are not guaranteed if the reimbursement would be contrary to any United States export control laws or regulations as defined by the U.S. Department of Commerce, the U.S. Department of State, or the U.S. Department of Treasury.

OTHER TERMS APPLICABLE TO CONSUMERS AS DEFINED by the MAGNUSON-MOSS WARRANTY ACT This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Allison Transmission does not authorize any person to create for it any other obligation or liability in connection with these transmissions.

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THESE TRANSMISSIONS IS LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN WARRANTY.

PERFORMANCE OF REPAIRS AND NEEDED ADJUSTMENTS IS THE EXCLUSIVE REMEDY UNDER THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY. ALLISON TRANSMISSION SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, LOST WAGES OR VEHICLE RENTAL EXPENSES) RESULTING FROM BREACH OF THIS WRITTEN WARRANTY OR ANY IMPLIED WARRANTY.** ** Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

OTHER TERMS APPLICABLE TO OTHER END-USERS

THIS WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE ALLISON TRANSMISSION MODELS LISTED

ABOVE AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALLISON

TRANSMISSION DOES NOT AUTHORIZE ANY PERSON TO CREATE FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SUCH TRANSMISSIONS. ALLISON TRANSMISSION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY.

QUESTIONS
If you have any questions regarding this warranty or the performance of warranty obligations, you may contact any Allison Transmission Distributor or Dealer or write to:

Allison Transmission, Inc.

P.O. Box 894
Indianapolis, IN 46206-0894
Attention: Warranty Administration PF-9

Form SE0616EN (201009)

Page 2 of 2 ends

United Plastic Fabricating, Inc. (hereinafter called “UPF”) warrants each POLY-TANK®, Booster/Foam Tank POLYSIDE® Wetside Tank, Integrator Tank/Body, ELLIPSE™ Elliptical Tank, Ellip-T-Tank Tank and DEFENDER™ Skid Tank to be free from defects in material and workmanship for the service life of the original vehicle (vehicle must be actively used in an emergency re- sponse for fire suppression). All UPF Tanks must be installed and operated in accordance with the UPF Installation and Operating Guidelines. Failure to do so can void the warranty.

Every UPF Tank is inspected and tested before leaving our facility. Should your UPF Tank require service, please notify UPF via email, fax, in writing or by calling UPF at 1-978-975-4520. Please provide the serial number, a de - scription of the service request, the location along with the phone number and name of the contact person. Our goal is to have scheduled work completed within a reasonable time period.

Under a valid warranty claim, UPF will cover the cost to repair the UPF Tank including the customary and reasonable costs to make the tank accessible such as the removal and reinstallation of the tank if authorized in advance (pre-approved) by UPF. The warranty will not cover tanks that have been im- properly installed, operated, misused, abused, or modified from its intended or designed use. Serial number must not have been altered, defaced or re - moved. Tanks that are not stored or installed properly which results in the tank suffering UV damage will not be covered by this agreement.

Should UPF determine that the service claim is valid under this warranty for a tank located outside of the United States and Canada, UPF will assume the costs for labor and material for the warranty repair as described above plus all travel costs to the U.S. port of embarkation. Costs for airline travel outside of the U.S. and Canada will not be the responsibility of UPF.

In the event the tank shall become stationed in an area of the world that is considered to be a war zone or where unsafe conditions exist for the safe passage of United States Nationals, as reported by the United States Depart- ment of State, (http://www.state.gov), and a request to perform service or warranty repairs, UPF reserves the right to refuse to honor such requests. It is the purchaser’s responsibility to relocate the tank to an area where such repairs can be performed without undue risk to UPF employees or their des - ignee. UPF will make every reasonable effort to support our products though alternative means.

For Ellipse™ elliptical tanks, a separate five year warranty provided by the subcontractor is applied to the sub-frames, chute linings (rubber isolation strips) and metal components. The stainless steel wrap provided by UPF shall be warranted by the subcontractor performing the wrap installation in accordance with their warranty in place at the time of the installation. UPF will not be liable for any warranty costs associated with the wrap, sub-frames, chute linings (rubber isolation strips) and metal components but will assist with all claims on behalf of its customer.

For PolySide® wetsided tanks and Integrator™ Tank/Body units, all polypro- pylene components related to the tank shall carry the standard UPF lifetime FOR: POLY-TANK®, POLYSIDE®, INTEGRATOR™, ELLIPSE™, ELLIP-T-TANK™ & DEFENDER™

WARRANTY
UNITED PLASTIC FABRICATING, INC.

LIFETIME SERVICE WARRANTY
Continued on back
E f f e c t i v e 1 A u g u s t , 2 0 0 9
service warranty. Other polypropylene components, including but not limited to compartments, wheel wells, fenders and other body related components shall be warranted by UPF for a period of ten years. The warranty for the PolySide® and Integrator™ units excludes paint or hardware, which shall be covered by the manufacturer of the paint/hardware.

All UPF tanks 50 gallons or less utilized for non-fire applications and installed on specialty vehicles such as ATVs, trailers, boats, etc. are covered under a separate warranty policy available from UPF. Further, UPF Protector™ foam and water trailers are warranted under a separate warranty policy available from UPF.

This UPF warranty is transferable within the United States only with prior writ- ten approval by UPF (except an original apparatus manufacturer may assign this warranty to the first titled owner/lessee of the apparatus).

UPF will NOT reimburse any unnecessary work and/or work that has not been pre-approved. Any and all third party charges must be pre- authorized and approved in writing by UPF prior to commencing the work. Any unauthorized third party repairs, alterations, actions or modi- fications will not be covered and can void the warranty. UPF will be the sole determining authority as to whether a service claim will be valid and covered under this warranty.

In no event will UPF be liable for an amount in excess of the purchase price of the booster/foam tank at the time of manufacture or for any loss or dam - age, whether direct, indirect, incidental, consequential, or otherwise arising out of failure of its product. Loss of contents (water, foam, etc.) shall not be the responsibility of UPF. Further, UPF is not responsible for costs associated with service repairs to chassis, sub-frames, bodies, valves, dumps, hoses, pressure vacuum vents, and other components (i.e. liquid level transducers, etc.). Further, UPF will not cover the cost for travel of the vehicle to and from a repair facility.

This warranty contains the entire warranty. It is the sole warranty and price agreements or representation, whether oral or written, are either merged herein or expressly cancelled. UPF neither assumes, nor authorizes any per- son supposing to act on its behalf to change, nor assume for it, any warranty or liability concerning its product.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow exclusion or limitation or incidental or consequential damage, so the above limitation or exclusion may not apply to you. Since some states do not allow limitations on the length of an implied warranty, the above limitation may not apply to you.

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EX - TEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. THERE IS

NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITION -

ALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATION OR LIABILITIES ON THE PART OF UPF.

FOR: POLY-TANK®, POLYSIDE®, INTEGRATOR™, ELLIPSE™, ELLIP-T-TANK™ & DEFENDER™

WARRANTY
UNITED PLASTIC FABRICATING, INC.

POLY-TANK®,& POLYSIDE® are registered trademarks of UPF, Inc. INTEGRATOR™, ELLIPSE™, ELLIP-T-TANK™ & DEFENDER™ are trademarks of UPF, Inc. © 08/01/09 UPF, Inc. Printed in the USA 2 6 0 0 A M E R I C A N D R I V E • A P P L E T O N , W I 5 4 9 1 2- 2 0 1 7 • 9 2 0- 832 - 3 000

P I E R C E M A N U F A C T U R I N G I N C .

B U L L E T I N

TO: All Dealer Service Representatives

From: Kevin Hanegraaf

DATE: January 4, 2010

RE: UPF Tank Warranty Policy – Truck in Accident

Service Topic #292

To keep the UPF tank warranty valid on trucks that have been involved in a vehicular accident, it is UPF’s policy that the customer must remove the tank from the truck and send it back to one of UPF’s facilities for inspection. In the event that this does not take place, the warranty will be considered null and void.

The customer must remove and send the tank back to UPF for inspection in order to maintain the original warranty coverage, at which time it will be:
- Filled with water
- Visually inspected
- Ultraviolet spark tested on articulating test stand in the dark - Recommendation for repairs if necessary provided by UPF - Fully evaluated and repaired by UPF

If your customer chooses to leave the tank on the truck and wants a technician to inspect and/or repair the tank in the field, then the warranty is no longer in effect.

This direction is upheld by UPF because the technician cannot inspect the entire tank when it is still installed on the truck.

Note: This memo is intended to relay the information Pierce has received on UPF’s tank warranty for trucks that are in a vehicular accident. In the event of an actual claim, we direct you to consult with UPF’s service Manager Maura Watts (800-638-8265 x253)

Note: Any Surety Bond, if a part of the sale of the vehicle as to which this limited warranty is provided, applies only to this Pierce Basic One Year Limited Warranty for such vehicle, and not to other warranties made by Pierce in a separate document (if any) or to the warranties (if any) made by any manufacturer (other than Pierce) of any part, component, attachment or accessory that is incorporated into or attached to the vehicle. 2/8/2010 WA0009

1. LIMITED WARRANTY
THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL

OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.

2. DISCLAIMERS OF WARRANTIES
The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty.

This limited warranty shall apply only if the product is properly maintained in accordance with Pierce's maintenance instructions and manuals and is used in service which is normal to the particular model. Normal service means service which does not subject the product to stresses or impacts greater than normally result from careful use. If the Buyer discovers a defect or nonconformity, it must notify Pierce in writing within thirty (30) days after the date of discovery, but in any event prior to the expiration of the warranty period.

THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE

TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY.

This warranty applies only to the body tubular support and mounting structures and other structural components of the body of the vehicle model, as identified in the Pierce
specifications for the Fire and Rescue Apparatus.

This warranty does not apply to damage caused by corrosion.

Conditions and
Exclusions:

See Also
Paragraphs
2 thru 4
Limited Warranty
Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer:
(c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or
(a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to:

Fire and Rescue Apparatus
Coverage:

Ten (10) Year Structural Integrity
Apparatus Body
Ten (10) Years
- or -
100,000 Miles
Warranty Period
Ends After:

The date of the original purchase invoice (issued when the product ships from the factory).Warranty Begins:

The apparatus body shall be free from structural failures caused by defects in material and workmanship
(d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot;

4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.

Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL,

INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER,

WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW

OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY

PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS

THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO,

REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages.

If the product fails to conform to the warranty set forth in paragraph 1 during the warranty period, and such nonconformity is not due to misuse, neglect, accident or improper maintenance, Buyer must notify Pierce within the time period specified in paragraph 1, and shall make the product available for inspection by Pierce or its designated agent. At the request of Pierce, any allegedly defective product shall be returned to Pierce by Buyer for examination and/or repair. Buyer shall be responsible for the cost of such transportation, and for risk of loss of or damage to the product during transportation.

Within a reasonable time, Pierce shall repair or replace (at Pierce's option and expense) any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance in writing by Pierce. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY.

3. BUYER'S EXCLUSIVE REMEDY.

Warranty Begins:

Stainless steel piping shall be free from structural failures caused by defects in material and workmanship, or
perforation caused by corrosion.
(b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot; (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce.

Ten (10) Years
- or -
100,000 Miles
Warranty Period
Ends After:

Fire and Rescue Apparatus
Coverage:

Ten (10) Year Material and Workmanship
Stainless Steel Piping

1. LIMITED WARRANTY
The original purchaser may void this warranty in part or in its entirety if the product is repaired or replaced (a) without prior written approval of the Pierce Customer Service Department; or (b) at a facility which has not been approved by Pierce as to technical Limited Warranty
Subject to the limitations and exclusions set forth below, Pierce Manufacturing provides the following warranty to the Buyer:
(c) any vehicle, chassis or component, part, attachment or accessory that has been repaired, altered or assembled in any way by any person or entity other than Pierce which, in the sole judgment of Pierce, adversely affects the performance, stability or purpose for which it was manufactured; or
(a) any integral parts, components, attachments or trade accessories of or to the product that are not manufactured by Pierce, including but not limited to engines, transmissions, drivelines, axles, water pumps and generators; with respect to all such parts, components, attachments and accessories, Pierce shall assign to Buyer the applicable warranties, if any, made by the respective manufacturers thereof; Notwithstanding anything to the contrary herein, Pierce makes no warranty whatsoever as to:

The date of the original purchase invoice (issued when the product ships from the factory).

THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE

TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY.

Pierce’s obligation under this warranty is limited to repairing or replacing without charge, as Pierce may elect, the
stainless steel piping or components which Pierce
determines to have failed due to defective material and workmanship, or perforation caused by corrosion.

This warranty does not cover the use of fluoroprotein (FP) type foam. The sodium chloride within FP foam can cause long-term damage to system components if not thoroughly flushed immediately after use.

Conditions and
Exclusions:

See Also
Paragraphs
2 thru 4

4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.

Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL,

INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER,

WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW

OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY

PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS

THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO,

REGARDLESS OF WHETHER PIERCE HAS BEEN INFORMED OF THE
POSSIBILITY OF ANY SUCH DAMAGES. Without limiting the generality of the foregoing, Pierce specifically disclaims any liability for property or personal injury damages, penalties, damages for lost profits or revenues, loss of vehicles or products or any associated equipment, cost of substitute vehicles or products, down-time, delay damages, any other types of economic loss, or for any claims by any third party for any such damages.

3. BUYER'S EXCLUSIVE REMEDY.

ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.

2. DISCLAIMERS OF WARRANTIES
capability. Any repairs, modifications, alterations or aftermarket parts added after manufacture without the authorization of Pierce may void this warranty.

1. LIMITED WARRANTY
THE WARRANTY SET FORTH IN PARAGRAPH 1 IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY PIERCE. PIERCE HEREBY DISCLAIMS AND EXCLUDES ALL

OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY,

INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, ANY

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE.

THIS LIMITED WARRANTY MAY NOT BE ASSIGNED OR OTHERWISE

TRANSFERRED BY THE BUYER TO ANY SUBSEQUENT USER OR PURCHASER OR TO ANY OTHER PERSON OR ENTITY.

This limited warranty is applicable to the vehicle in the following percentage costs of warranty repair, if any:

Topcoat Durability & Appearance: Gloss, Color Retention & Cracking
0-72 months 100%
73-96 months 50%
97-120 months 25%
Integrity of Coating System: Adhesion, Blistering/Bubbling 0-36 months 100%
37-84 months 50%
85-120 months 25%
Corrosion: Dissimilar Metal and Crevice
0-36 months 100%
37-48 months 50%
49-72 months 25%
73-120 months 10%
Corrosion Perforation
0-120 months 100%
This limited warranty applies only to exterior paint. Paint on the vehicle's interior is warranted only under the Pierce Basic One Year Limited Warranty.

Items not covered by this warranty include:
(a) Damage from lack of maintenance and cleaning (proper cleaning and maintenance procedures are detailed in the Pierce operation and maintenance manual).
(b) UV paint fade.
(c) Any cab not manufactured by Pierce.

Conditions and
Exclusions:

Fire and Rescue Apparatus
Coverage:

Ten (10) Year Pro-Rated Paint and Corrosion
Custom Body
Ten (10) YearsWarranty Period
Ends After:

The date of the original purchase invoice (issued when the product ships from the factory).Warranty Begins:

Exterior surfaces of the body shall be free from blistering, peeling, corrosion or any other adhesion defect caused by defective manufacturing methods or paint material selection. (d) products or parts which may in the ordinary course wear out and have to be replaced during the warranty period, including, but not limited to, tires, fluids, gaskets and light bulbs. Pierce assumes no responsibility for the assembly of its parts or subassemblies into finishing products or vehicles unless the assembly is performed by Pierce. (b) any vehicle, chassis, or component, part, attachment or accessory damaged by misuse, neglect, fire, exposure to severe environmental or chemical conditions, acidic environment, improper maintenance, accident, crash, or force majeure such as natural disaster, lightning, earthquake, windstorm, hail, flood, war or riot;

4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.

Notwithstanding anything to the contrary herein or in any agreement between Pierce and Buyer, IN NO EVENT SHALL PIERCE BE LIABLE FOR ANY CONSEQUENTIAL,

INCIDENTAL, SPECIAL, INDIRECT, OR PUNITIVE DAMAGES WHATSOEVER,

WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORY OF LAW

OR EQUITY, WITH RESPECT TO VEHICLES OR OTHER PRODUCTS SOLD BY

PIERCE, OR THEIR OPERATION OR FAILURE TO OPERATE, OR ANY DEFECTS

THEREIN, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATED THERETO,

3. BUYER'S EXCLUSIVE REMEDY.

Revised 6.1.18

AMENDMENT No. 1 to CONTRACT No. FS12-19
For
Fire Service Apparatus (All Types)
Between

HOUSTON-GALVESTON AREA COUNCIL
And
Golden State Fire Apparatus, Inc.

THIS AMENDMENT modifies the above referenced Contract as follows:

This contract is extended through May 31, 2022 Midnight CT.

Unless otherwise noted, this amendment goes into effect on the date signed by H-GAC. All other terms and conditions of this Contract shall remain unchanged and in full force and effect.

IN WITNESS WHEREOF, the parties have caused this Agreement to be executed by their respective duly authorized representatives.

Signed for Houston-Galveston Area Council, ____________________________________ Houston, Texas Chuck Wemple, Executive Director

Date: _______________________________

Signed for: Golden State Fire Apparatus, Inc. ____________________________________

Printed Name & Title: ____________________________________

Date: _______________________________

DocuSign Envelope ID: 0474627D-9727-4E3E-BD94-14C83018E5A7 Ryan Wright President
9/30/2021
10/12/2021
Revised 6.1.18

AMENDMENT No. 2 to CONTRACT No. FS12-19
For
Fire Service Apparatus (All Types)
Between

HOUSTON-GALVESTON AREA COUNCIL
And
Golden State Fire Apparatus, Inc.

THIS AMENDMENT modifies the above referenced Contract as follows:

This contract is extended through May 31, 2023 Midnight CT.

Unless otherwise noted, this amendment goes into effect on the date signed by H-GAC. All other terms and conditions of this Contract shall remain unchanged and in full force and effect.

IN WITNESS WHEREOF, the parties have caused this Agreement to be executed by their respective duly authorized representatives.

Signed for Houston-Galveston Area Council, ____________________________________ Houston, Texas Chuck Wemple, Executive Director

Date: _______________________________

Signed for: Golden State Fire Apparatus, Inc. ____________________________________

Printed Name & Title: ____________________________________

Date: _______________________________

DocuSign Envelope ID: 9F37BB4F-6592-4452-B68D-94B60F39A613 5/12/2022
Ryan Wright President
5/16/2022

H-GAC
Houston-Galveston Area Council
P.O. Box 22777 · 3555 Timmons · Houston, Texas 77227-2777 Cooperative Agreement - Golden State Fire Apparatus, Inc. - Public Services - -

Page 1 of 7 ends

GENERAL PROVISIONS

This Agreement is made and entered into, by and between the Houston-Galveston Area Council hereinafter referred to as H-GAC having its principal place of business at 3555 Timmons Lane, Suite 120, Houston, Texas 77027 and Golden State Fire Apparatus, Inc., hereinafter referred to as the Contractor, having its principal place of business at 7400 Reese Road, Sacramento, CA 95828.

WITNESSETH:

WHEREAS, H-GAC hereby engages the Contractor to perform certain services in accordance with the specifications of the Agreement; and

WHEREAS, the Contractor has agreed to perform such services in accordance with the specifications of the Agreement;

NOW, THEREFORE, H-GAC and the Contractor do hereby agree as follows:

ARTICLE 1: LEGAL AUTHORITY
The Contractor warrants and assures H-GAC that it possesses adequate legal authority to enter into this Agreement. The Contractor's governing body, where applicable, has authorized the signatory official(s) to enter into this Agreement and bind the Contractor to the terms of this Agreement and any subsequent amendments hereto.

ARTICLE 2: APPLICABLE LAWS
The Contractor agrees to conduct all activities under this Agreement in accordance with all applicable rules, regulations, directives, standards, ordinances, and laws, in effect or promulgated during the term of this Agreement, including without limitation, workers’ compensation laws, minimum and maximum salary and wage statutes and regulations, and licensing laws and regulations. When required, the Contractor shall furnish H-GAC with satisfactory proof of its compliance therewith.

ARTICLE 3: INDEPENDENT CONTRACTOR
The execution of this Agreement and the rendering of services prescribed by this Agreement do not change the independent status of H-GAC or the Contractor. No provision of this Agreement or act of H- GAC in performance of the Agreement shall be construed as making the Contractor the agent, servant or employee of H-GAC, the State of Texas or the United States Government. Employees of the Contractor are subject to the exclusive control and supervision of the Contractor. The Contractor is solely responsible for employee related disputes and discrepancies, including employee payrolls and any claims arising therefrom.

ARTICLE 4: WHOLE AGREEMENT
The General Provisions, Special Provisions, and Attachments, as provided herein, constitute the complete Agreement (“Agreement”) between the parties hereto, and supersede any and all oral and written agreements between the parties relating to matters herein. Except as otherwise provided herein, this Agreement cannot be modified without written consent of the parties.

ARTICLE 5: SCOPE OF SERVICES
DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 2 of 7 ends

The services to be performed by the Contractor are outlined in an Attachment to this Agreement.

ARTICLE 6: PERFORMANCE PERIOD
This Agreement shall be performed during the period which begins Dec 01 2019 and ends Nov 30 2021.

All services under this Agreement must be rendered within this performance period, unless directly specified under a written change or extension provisioned under Article 14, which shall be fully executed by both parties to this Agreement.

ARTICLE 7: PAYMENT OR FUNDING
Payment provisions under this Agreement are outlined in the Special Provisions.

ARTICLE 8: REPORTING REQUIREMENTS
If the Contractor fails to submit to H-GAC in a timely and satisfactory manner any report required by this Agreement, or otherwise fails to satisfactorily render performances hereunder, H-GAC may terminate this agreement with notice as identified in Article 15 of these General Provisions. H-GAC has final determination of the adequacy of performance and reporting by Contractor. Termination of this agreement for failure to perform may affect Contractor’s ability to participate in future opportunities with H-GAC. The Contractor's failure to timely submit any report may also be considered cause for termination of this Agreement.

Any additional reporting requirements shall be set forth in the Special Provisions of this Agreement.

ARTICLE 9: INSURANCE
Contractor shall maintain insurance coverage for work performed or services rendered under this Agreement as outlined and defined in the attached Special Provisions.

ARTICLE 10: SUBCONTRACTS and ASSIGNMENTS
Except as may be set forth in the Special Provisions, the Contractor agrees not to subcontract, assign, transfer, convey, sublet or otherwise dispose of this Agreement or any right, title, obligation or interest it may have therein to any third party without prior written approval of H-GAC. The Contractor acknowledges that H-GAC is not liable to any subcontractor or assignee of the Contractor. The Contractor shall ensure that the performance rendered under all subcontracts shall result in compliance with all the terms and provisions of this Agreement as if the performance rendered was rendered by the Contractor. Contractor shall give all required notices, and comply with all laws and regulations applicable to furnishing and performance of the work. Except where otherwise expressly required by applicable law or regulation, H-GAC shall not be responsible for monitoring Contractor's compliance, or that of Contractor’s subcontractors, with any laws or regulations.

ARTICLE 11: AUDIT
Notwithstanding any other audit requirement, H-GAC reserves the right to conduct or cause to be conducted an independent audit of any transaction under this Agreement, such audit may be performed by the H-GAC local government audit staff, a certified public accountant firm, or other auditors designated by H-GAC and will be conducted in accordance with applicable professional standards and practices. The Contractor understands and agrees that the Contractor shall be liable to the H-GAC for any findings that result in monetary obligations to H-GAC.

ARTICLE 12: EXAMINATION OF RECORDS
The Contractor shall maintain during the course of the work complete and accurate records of all of the Contractor's costs and documentation of items which are chargeable to H-GAC under this Agreement.

H-GAC, through its staff or designated public accounting firm, the State of Texas, and United States Government, shall have the right at any reasonable time to inspect, copy and audit those records on or DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 3 of 7 ends

off the premises by authorized representatives of its own or any public accounting firm selected by H- GAC. The right of access to records is not limited to the required retention period, but shall last as long as the records are retained. Failure to provide access to records may be cause for termination of the Agreement. The records to be thus maintained and retained by the Contractor shall include (without limitation): (1) personnel and payroll records, including social security numbers and labor classifications, accounting for total time distribution of the Contractor's employees working full or part time on the work, as well as cancelled payroll checks, signed receipts for payroll payments in cash, or other evidence of disbursement of payroll payments; (2) invoices for purchases, receiving and issuing documents, and all other unit inventory records for the Contractor's stocks or capital items; and (3) paid invoices and cancelled checks for materials purchased and for subcontractors' and any other third parties' charges.

The Contractor further agrees that the examination of records outlined in this article shall be included in all subcontractor or third-party agreements.

ARTICLE 13: RETENTION OF RECORDS
The Contractor and its subcontractors shall maintain all records pertinent to this Agreement, and all other financial, statistical, property, participant records, and supporting documentation for a period of no less than seven (7) years from the later of the date of acceptance of the final payment or until all audit findings have been resolved. If any litigation, claim, negotiation, audit or other action involving the records has been started before the expiration of the retention period, the records shall be retained until completion of the action and resolution of all issues which arise from it, or until the end of the seven (7) years, whichever is later, and until any outstanding litigation, audit, or claim has been fully resolved.

ARTICLE 14: CHANGES AND AMENDMENTS
A. Any alterations, additions, or deletions to the terms of this Agreement, which are required by changes in federal or state law or by regulations, are automatically incorporated without written amendment hereto, and shall become effective on the date designated by such law or by regulation.

B. To ensure the legal and effective performance of this Agreement, both parties agree that any amendment that affects the performance under this Agreement must be mutually agreed upon and that all such amendments must be in writing. After a period of no less than 30 days subsequent to written notice, unless sooner implementation is required by law, such amendments shall have the effect of qualifying the terms of this Agreement and shall be binding upon the parties as if written herein.

ARTICLE 15: TERMINATION PROCEDURES
The Contractor acknowledges that this Agreement may be terminated for Convenience or Default.

A. Convenience
H-GAC may terminate this Agreement at any time, in whole or in part, with or without cause, whenever H-GAC determines that for any reason such termination is in the best interest of H- GAC, by providing written notice by certified mail to the Contractor. Upon receipt of notice of termination, all services hereunder of the Contractor and its employees and subcontractors shall cease to the extent specified in the notice of termination.

The Contractor may cancel or terminate this Agreement upon submission of thirty (30) days written notice, presented to H-GAC via certified mail. The Contractor may not give notice of cancellation after it has received notice of default from H-GAC.

B. Default
DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 4 of 7 ends

H-GAC may, by written notice of default to the Contractor, terminate the whole or any part of the Agreement, in any one of the following circumstances:
(1) lf the Contractor fails to perform the services herein specified within the time specified herein or any extension thereof; or
(2) If the Contractor fails to perform any of the other provisions of this Agreement for any reason whatsoever, or so fails to make progress or otherwise violates the Agreements that completion of services herein specified within the Agreement term is significantly endangered, and in either of these two instances does not cure such failure within a period often (10) days (or such longer period of time as may be authorized by H-GAC in writing) after receiving written notice by certified mail of default from H-GAC.

ARTICLE 16: SEVERABILITY
H-GAC and Contractor agree that should any provision of this Agreement be determined to be invalid or unenforceable, such determination shall not affect any other term of this Agreement, which shall continue in full force and effect.

ARTICLE 17: FORCE MAJEURE
To the extent that either party to this Agreement shall be wholly or partially prevented from the performance of any obligation or duty placed on such party by reason of or through strikes, stoppage of labor, riot, fire, flood, acts of war, insurrection, accident, order of any court, act of God, or specific cause reasonably beyond the party's control and not attributable to its neglect or nonfeasance, in such event, the time for the performance of such obligation or duty shall be suspended until such disability to perform is removed. Determination of force majeure shall rest solely with H-GAC.

ARTICLE 18: CONFLICT OF INTEREST
No officer, member or employee of the Contractor or subcontractor, no member of the governing body of the Contractor, and no other public officials of the Contractor who exercise any functions or responsibilities in the review or Contractor approval of this Agreement, shall participate in any decision relating to this Agreement which affects his or her personal interest, or shall have any personal or pecuniary interest, direct or indirect, in this Agreement.

ARTICLE 19: FEDERAL COMPLIANCE
Contractor agrees to comply with all federal statutes relating to nondiscrimination, labor standards, and environmental compliance. Additionally, for work to be performed under the Agreement or subcontract thereof, including procurement of materials or leases of equipment, Contractor shall notify each potential subcontractor or supplier of the Contractor's federal compliance obligations. These may include, but are not limited to: (a) Title VI of the Civil Rights Act of 1964 (P.L. 88-352) which prohibits discrimination on the basis of race, color or national origin; (b) Title IX of the Education Amendments of 1972, as amended (20 U.S.C. §§ 1681-1683, and 1685-1686), which prohibits discrimination on the basis of sex; (c) the Fair Labor Standards Act of 1938 (29 USC 676 et. seq.), (d) Section 504 of the Rehabilitation Act of 1973, as amended (29 U.S.C. § 794), which prohibits discrimination on the basis of handicaps and the Americans with Disabilities Act of 1990; (e) the Age Discrimination in Employment Act of 1967 (29 USC 621 et. seq.) and the Age Discrimination Act of 1974, as amended (42 U.S.C. §§ 6101-6107), which prohibits discrimination on the basis of age; (f) the Drug Abuse Office and Treatment Act of 1972 (P.L. 92-255), as amended, relating to nondiscrimination on the basis of drug abuse; (g) the Comprehensive Alcohol Abuse and Alcoholism Prevention, Treatment and Rehabilitation Act of 1970 (P.L. 91-616), as amended, relating to the nondiscrimination on the basis of alcohol abuse or alcoholism; (h) §§ 523 and 527 of the Public Health Service Act of 1912 (42 U.S.C. 290 dd-3 and 290 ee- 3), as amended, relating to confidentiality of alcohol and drug abuse patient records; (i) Title VIII of the Civil Rights Act of 1968 (42 U.S.C. § 3601 et seq.), as amended, relating to nondiscrimination in the sale, rental or financing of housing; (j) any other nondiscrimination provisions in any specific statute(s) DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 5 of 7 ends

applicable to any Federal funding for this Agreement; (k) the requirements of any other nondiscrimination statute(s) which may apply to this Agreement; (l) applicable provisions of the Clean Air Act (42 U.S.C. §7401 et seq.), the Federal Water Pollution Control Act, as amended (33 U.S.C. §1251 et seq.), Section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and the Environmental Protection Agency regulations at 40 CPR Part 15; (m) applicable provisions of the Davis- Bacon Act (40 U.S.C. 276a - 276a-7), the Copeland Act (40 U.S.C. 276c), and the Contract Work Hours and Safety Standards Act (40 U.S.C. 327-332), as set forth in Department of Labor Regulations at 20 CPR 5.5a; (n) the mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act (P.L. 94-163).

ARTICLE 20: CRIMINAL PROVISIONS AND SANCTIONS
The Contractor agrees to perform the Agreement in conformance with safeguards against fraud and abuse as set forth by the H-GAC, the State of Texas, and the acts and regulations of any related state or federal agency. The Contractor agrees to promptly notify H-GAC of any actual or suspected fraud, abuse, or other criminal activity through the filing of a written report within twenty-four (24) hours of knowledge thereof. Contractor shall notify H-GAC of any accident or incident requiring medical attention arising from its activities under this Agreement within twenty-four (24) hours of such occurrence. Theft or willful damage to property on loan to the Contractor from H-GAC, if any, shall be reported to local law enforcement agencies and H-GAC within two (2) hours of discovery of any such act.

The Contractor further agrees to cooperate fully with H-GAC, local law enforcement agencies, the State of Texas, the Federal Bureau of Investigation and any other duly authorized investigative unit, in carrying out a full investigation of all such incidents.

The Contractor shall notify H-GAC of the threat of lawsuit or of any actual suit filed against the Contractor pertaining to this Agreement or which would adversely affect the Contractor’s ability to perform services under this Agreement.

ARTICLE 21: INDEMNIFICATION AND RECOVERY
H-GAC’s liability under this Agreement, whether for breach of contract, warranty, negligence, strict liability, in tort or otherwise, is limited to its order processing charge. In no event will H-GAC be liable for any loss of use, loss of time, inconvenience, commercial loss, lost profits or savings or other incidental, special or consequential damages to the full extent such use may be disclaimed by law.

Contractor agrees, to the extent permitted by law, to defend and hold harmless H-GAC, its board members, officers, agents, officials, employees and indemnities from any and all claims, costs, expenses (including reasonable attorney fees), actions, causes of action, judgements, and liens arising as a result of Contractor’s negligent act or omission under this Agreement. Contractor shall notifiy H-GAC of the threat of lawsuit or of any actual suit filed against Contractor relating to this Agreement.

ARTICLE 22: LIMITATION OF CONTRACTOR’S LIABILITY
Except as specified in any separate writing between the Contractor and an END USER, Contractor’s total liability under this Agreement, whether for breach of contract, warranty, negligence, strict liability, in tort or otherwise, but excluding its obligation to indemnify H-GAC, is limited to the price of the particular products/services sold hereunder, and Contractor agrees either to refund the purchase price or to repair or replace product(s) that are not as warranted. In no event will Contractor be liable for any loss of use, loss of time, inconvenience, commercial loss, loss of profits or savings or other incidental, special or consequential damages to the full extent such use may be disclaimed by law.

Contractor understands and agrees that it shall be liable to repay and shall repay upon demand to DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 6 of 7 ends

END USER any amounts determined by H-GAC, its independent auditors, or any agency of State or Federal government to have been paid in violation of the terms of this Agreement.

ARTICLE 23: TITLES NOT RESTRICTIVE
The titles assigned to the various Articles of this Agreement are for convenience only. Titles shall not be considered restrictive of the subject matter of any Article, or part of this Agreement.

ARTICLE 24: JOINT WORK PRODUCT
This Agreement is the joint work product of H-GAC and the Contractor. This Agreement has been negotiated by H-GAC and the Contractor and their respective counsel and shall be fairly interpreted in accordance with its terms and, in the event of any ambiguities, no inferences shall be drawn against any party.

ARTICLE 25: DISPUTES
All disputes concerning questions of fact or of law arising under this Agreement, which are not addressed within the Whole Agreement as defined pursuant to Article 4 hereof, shall be decided by the Executive Director of H-GAC or his designee, who shall reduce his decision to writing and provide notice thereof to the Contractor. The decision of the Executive Director or his designee shall be final and conclusive unless, within thirty (30) days from the date of receipt of such notice, the Contractor requests a rehearing from the Executive Director of H-GAC. In connection with any rehearing under this Article, the Contractor shall be afforded an opportunity to be heard and offer evidence in support of its position. The decision of the Executive Director after any such rehearing shall be final and conclusive. The Contractor may, if it elects to do so, appeal the final and conclusive decision of the Executive Director to a court of competent jurisdiction. Pending final decision of a dispute hereunder, the Contractor shall proceed diligently with the performance of the Agreement and in accordance with H- GAC's final decision.

ARTICLE 26: CHOICE OF LAW: VENUE
This Agreement shall be governed by the laws of the State of Texas. Venue and jurisdiction of any suit or cause of action arising under or in connection with the Agreement shall lie exclusively in Harris County, Texas. Disputes between END USER and Contractor are to be resolved in accordance with the law and venue rules of the state of purchase. Contractor shall immediately notify H-GAC of such disputes.

ARTICLE 27: ORDER OF PRIORITY
In the case of any conflict between or within this Agreement, the following order of priority shall be utilized: 1) General Provisions, 2) Special Provisions, 3) Scope of Work, and, 4) Other Attachments.

DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 7 of 7 ends

SIGNATURES:

H-GAC and the Contractor have read, agreed, and executed the whole Agreement as of the date first written above, as accepted by:

Golden State Fire Apparatus, Inc.

Signature $docusign:SignHere::Customer1

Name Ryan Wright

Title President

Date $docusign:DateSigned::Customer1

H-GAC

Signature $docusign:SignHere::InternalSigner

Name Chuck Wemple

Title Executive Director

Date $docusign:DateSigned::InternalSigner

DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

H-GAC
Houston-Galveston Area Council
P.O. Box 22777 · 3555 Timmons · Houston, Texas 77227-2777 Cooperative Agreement - Golden State Fire Apparatus, Inc. - Public Services -

Page 1 of 4 ends

SPECIAL PROVISIONS

Incorporated by attachment, as part of the whole agreement, H-GAC and the Contractor do, hereby agree to the Special Provisions as follows:

ARTICLE 1: BIDS/PROPOSALS INCORPORATED

In addition to the whole Agreement, the follo wing documents listed in order of priority are incorporated into the Agreement by reference: Bid/Proposal Specifications and Contractor’s Response to the Bid/Proposal.

ARTICLE 2: END USER AGREEMENTS (“EUA”)

H-GAC acknowledges that the END USER may choose to enter into an End User Agreement (“EUA) with the Contractor through this Agreement, and that the term of the EUA may exceed the term of the current H-GAC Agreement. H-GAC’s acknowledgement is not an endorsement or approval of the End User Agreement’s terms and conditions. Contractor agrees not to offer, agree to or accept from the END USER, any terms or conditions that conflict with those in Contractor’s Agreement with H-GAC. Contractor affirms that termination of its Agreement with H-GAC for any reason shall not result in the termination of any underlying EUA, which shall in each instance, continue pursuant to the EUA’s stated terms and duration. Pursuant to the terms of this Agreement, termination of this Agreement will disallow the Contractor from entering into any new EUA with END USERS. Applicable H-GAC order processing charges will be due and payable to H-GAC on any EUAs, surviving termination of this Agreement between H-GAC and Contractor.

ARTICLE 3: MOST FAVORED CUSTOMER CLAUSE

Contractor shall provide its most favorable pricing and terms to H-GAC. If at any time during this Agreement, Contractor develops a regularly followed standard procedure of entering into agreements with other governmental customers within the State of Texas, and offers the same or substantially the same products/services offered to H-GAC on a basis that provides prices, warranties, benefits, and or terms more favorable than those provided to H-GAC, Contractor shall notify H-GAC within ten (10) business days thereafter, and this Agreement shall be deemed to be automatically retroactively amended, to the effective date of Contractor’s most favorable past agreement with another entity. Contractor shall provide the same prices, warranties, benefits, or terms to H-GAC and its END USER as provided in its most favorable past agreement.

H-GAC shall have the right and option at any time to decline to accept any such change, in which case the amendment shall be deemed null and void. If Contractor claims that a more favorable price, warranty, benefit, or term that was charged or offered to another entity during the term of this Agreement, does not constitute more favorable treatment, than Contractor shall, within ten (10) business days, notify H-GAC in writing, setting forth the detailed reasons Contractor believes the aforesaid offer is not in fact most favored treatment.

H-GAC, after due consideration of Contractor’s written explanation, may decline to accept such explanation and thereupon this Agreement between H-GAC and Contractor shall be automatically amended, effective retroactively, to the effective date of the most favored agreement, to provide the same prices, warranties, DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 2 of 4 ends

benefits, or terms to H-GAC and the END USER.

EXCEPTION: This clause shall not be applicable to prices and price adjustments offered by a bidder, Proposer or contractor, which are not within bidder's/proposer’s control [example; a manufacturer's bid concession], or to any prices offered to the Federal Government and its agencies.

ARTICLE 4: PARTY LIABILITY

Contractor’s total liability under this Agreement, whether for breach of contract, warranty, negligence, strict liability, in tort or otherwise, is limited to the price of the particular products/services sold hereunder.

Contractor agrees either to refund the purchase price or to repair or replace product(s) that are not as warranted.

Contractor accepts liability to repay, and shall repay upon demand to END USER, any amounts determined by H-GAC, its independent auditors, or any state or federal agency, to have been paid in violation of the terms of this Agreement.

ARTICLE 5: GOVERNING LAW & VENUE

Contractor and H-GAC agree that Contractor will make every reasonable effort to resolve disputes with the END USER in accord with the law and venue rules of the state of purchase. Contractor shall immediately notify H- GAC of such disputes.

ARTICLE 6: SALES AND ORDER PROCESSING CHARGE

Contractor shall sell its products to END USERS based on the pricing and terms of this Agreement. H-GAC will invoice Contractor for the applicable order processing charge when H-GAC receives notification of an END USER order. Contractor shall remit to H-GAC the full amount of the applicable order processing charge, after delivery of any product or service and subsequent END USER acceptance. Payment of the Order Processing Charge shall be remitted from Contractor to H-GAC, within thirty (30) calendar days or ten (10) business days after receipt of an END USER’s payment, whichever comes first, notwithstanding Contractor’s receipt of invoice. For sales made by Contractor based on this Agreement, including sales to entities without Interlocal Agreements, Contractor shall pay the applicable order processing charges to H-GAC. Further, Contractor agrees to encourage entities who are not members of H-GAC’s Cooperative Purchasing Program to execute an H-GAC Interlocal Agreement. H-GAC reserves the right to take appropriate actions including, but not limited to, Agreement termination if Contractor fails to promptly remit the appropriate order processing charge to H-GAC. In no event shall H-GAC have any liability to Contractor for any goods or services an END USER procures from Contractor. At all times, Contractor shall remain liable to pay to H-GAC any order processing charges on any portion of the Agreement actually performed, and for which compensation was received by Contractor.

ARTICLE 7: LIQUIDATED DAMAGES

Contractor and H-GAC agree that Contractor shall cooperate with the END USER at the time an END USER purchase order is placed, to determine terms for any liquidated damages.

ARTICLE 8: INSURANCE

Unless otherwise stipulated in Secti on B of the Bid/Proposal Specifications, Contractor must have the following insurance and coverage minimums:
a. General liability insurance with a Single Occ urrence limit of at least $1,000,000.00, and a General DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 3 of 4 ends

Aggregate limit of at least two times the Single Occurrence limit.

Product liability insurance with a Single Occurrence limit of at least $1,000,000.00, and a General Aggregate limit of at least two times the Sing le Occurrence limit for all Products except Automotive Fire Apparatus. For Automotive Fire Apparatus, see Section B of the Bid/Proposal Specifications.

Property Damage or Destruction insurance is required for coverage of End User owned equipment while in Contractor's possession, custody or control. The minimum Single Occurrence limit is $500,000.00 and the General Aggregate limit must be at least two times the Single Occurrence limit. This insurance may be carried in several ways, e.g. under an Inland Marine policy, as art of Automobile coverage, or under a Garage Keepers policy. In any event, this coverage must be specifically and clearly listed on insurance certificate(s) submitted to H-GAC. b. Insurance coverage shall be in effect for the length of any contract made pursuant to the Bid/Proposal, and for any extensions thereof, plus the number of days/months required to deliver any outstanding order after the close of the contract period.
c. Original Insurance Certificates must be furnished to H-GAC on request, showing Contractor as the insured and showing coverage and limits for the insurances listed above. d. If any Product(s) or Service(s) w ill be provided by parties other than Contractor, all such parties are required to carry the minimum insurance c overages specified herein, and if requested by H-GAC, a separate insurance certificate must be submitted for each such party. e. H-GAC reserves the right to contact insurance underw riters to confirm policy and certificate issuance and document accuracy.

ARTICLE 9: PERFORMANCE AND PAYMENT BONDS FOR INDIVIDUAL ORDERS

H-GAC’s contractual requirements DO NOT include a Performance & Payment Bond (PPB); therefore, Contractor shall offer pricing that reflects this cost savings. Contractor shall remain prepared to offer a PPB to cover any order if so requested by the END USER. Contractor shall quote a price to END USER for provision of any requested PPB, and agrees to furnish the PPB within ten business (10) days of receipt of END USER's purchase order.

ARTICLE 10: CHANGE OF STATUS

Contractor shall immediately notify H-GAC, in writing, of ANY change in ownership, control, dealership/franchisee status, Motor Vehicle license status, or name. Contractor shall offer written guidance to advise H-GAC if this Agreement shall be affected in any way by such change. H-GAC shall have the right to determine whether or not such change is acceptable, and to determine what action shall be warranted, up to and including cancellation of Agreement.

ARTICLE 11: TEXAS MOTOR VEHICLE BOARD LICENSING

All that deal in motor vehicles shall maintain current licenses that are required by the Texas Motor Vehicle Commission Code. If at any time during this Agreement term, any required Contractor license is denied, revoked, or not renewed, Contractor shall be in default of this Agreement, unless the Texas Motor Vehicle DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0

Page 4 of 4 ends

Board issues a stay or waiver. Contractor shall promptly provide copies of all current applicable Texas Motor Vehicle Board documentation to H-GAC upon request.

DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0 Attachment A
Golden State Fire Apparatus, Inc.

Fire Service Apparatus (All Types)
Contract No. FS12-19
A. Aerials (Booms/Platforms, Ladders, Ladder/Platforms
FS19VA01 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 75' Steal Rear-Mounted Telescoping Ladder (500#) $841,899.00 FS19VA02 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 75' Steal Rear-Mounted Telescoping Ladder (500#) $875,497.00 FS19VA03 Pierce Enforcer Chassis 4-Door 75' Aluminum Rear Mounted Telescoping Ladder, Formed Aluminum Body $827,652.00
FS19VA04 Pierce Arrow Chassis 4-Door 100' Aluminum Rear Mount Aerial, Aluminum Body, Tandem Axle $1,126,674.00
FS19VA05 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 107' Rear-Mounted Telescoping Ladder $936,103.00 FS19VA06 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Rear Axle, 107' Rear-Mounted Telescoping Ladder $981,819.00 FS19VA07 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Rear Axle, 110' Rear-Mounted Telescoping Platform $1,031,013.00 FS19VA08 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 105' Rear-Mounted Telescoping Ladder (500#) $982,626.00 FS19VA09 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 100' Mid-Mounted Telescoping Ladder with Platform $1,322,460.00 FS19VA10 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 100' Rear-Mounted Telescoping Ladder with Platform (750#) $1,254,844.00 FS19VA11 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 107' Tractor Drawn - Mid-Mounted Telescoping Ladder (#500) $1,266,367.00 FS19VB01 Pierce Brush Fire Apparatus, Ford F450, Formed Aluminum Utility Body $138,870.00 FS19VB02 Pierce Brush Fire Apparatus, Ford F-550 Mini Pumper 500 gpm, 300 tank $215,358.00 FS19VB03 Freightliner 4-Door 4 x 4 Wildland, 500 water, 1000 gpm Pump $364,240.00 FS19VC01 M2 Freightliner, 2-Door, OEM Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper $264,379.00
FS19VC02 IHC, 2-Door, OEM Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper $273,152.00
FS19VC03 KW, 2-Door, OME Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper $267,171.00
FS19VC04 Peterbilt, 2-Door, OME Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper $275,936.00
FS19VC06 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper $456,160.00
FS19VC07 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper $492,768.00
V. Pierce
C. Pumper Fire Apparatus
B. Wildland Fire Apparatus
**These units can only be sold outside Texas**
DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0 FS19VC08 Pierce Velocity, 4- Door Fulll Tilt Cab, Aluminum Long Body, 1250 gpm mid- mounted Pump $578,586.00
FS19VC09 Pierce Dash CF, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, PUC Body Pumper $643,725.00
FS19VD01 Ford F-550 4- Door, 12 'Non-Walk-in Formed Aluminum Body $154,273.00 FS19VD02 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk- In Body $208,337.00
FS19VD03 IHC, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body $210,190.00 FS19VD04 Kenworth, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body $204,051.00
FS19VD05 Peterbilt, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body $214,955.00
FS19VD06 Pierce Saber FR, Full-Tilt, Aluminum Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Encore Body 18.5' $396,673.00
FS19VD07 Pierce Enforcer 4-Door, Aluminum Cab, Single Axle, Formed Aluminum Body, Non Walk-in HDR Body $497,432.00
FS19VD08 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Non-Walk-in HDR Body $609,953.00 FS19VD09 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body $300,407.00
FS19VD10 IHC, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body $302,928.00 FS19VD11 Kenworth, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body $298,047.00 FS19VD12 Peterbilt, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body $305,177.00 FS19VD13 Pierce Enforcer 4-Door, Full Tilt, Aluminum Cab, Single Axle, Formed Aluminum Body, Walk-in HDR Body $598,680.00
FS19VD14 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Walk-in HDR Body $704,579.00 FS19VD15 Pierce Velocity 2-Door, Aluminum Cab, Tandem Axle, Combination Formed Aluminum Body $747,407.00
FS19VD16 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Walk-in Communications Body $776,914.00 E. Pumper/Tankers & Tankers
FS19VE01 Freightliner 2 Door, Single Axle Tanker, Aluminum Body w/2000 water & 500 pump $276,292.00 FS19VE02 IHC 2dr Single Axle Tanker, Aluminum Body w/2000 water & 500 pump $279,029.00 FS19VE03 Kenworth 2dr Single Axle Tanker, Aluminum Body w/2000 water & 500 pump $276,490.00 FS19VE04 Peterbilt 2dr Single Axle Tanker, Aluminum w/2000 water & 500 pump $303,543.00 FS19VE05 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Pumper/Tanker, Aluminum Body, Single Axle, 1000 GPM Pump, Mid-Mounted $508,722.00
FS19VE06 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Pumper/Tanker, Aluminum Body, Tandem Axle, 1000 GPM Pump, Mid-Mounted $584,155.00
FS19VE07 Freightliner 2dr, Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump $304,897.00 FS19VE08 IHC 2dr Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump $317,114.00 FS19VE09 Kenworth 2dr Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump $294,582.00 FS19VE10 Peterbilt 2dr Tandem Axle Tanker, Aluminum w/3000 water & 500 pump $305,758.00 FS19VE11 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1000 GPM Pump, Mid-Mounted Elliptical Tanker $507,029.00 D. Special Service Apparatus (Walk-In Bodies) Multi-use: Rescue, RE-Hab, Hazmat, Mobile Command Center DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0 FS19VE12 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Tandem Axle, 1000 GPM Pump, Mid-Mounted Elliptical Tanker $602,900.00 FS19VE13 Pierce Velocity, 4-Door Aluminum Cab, Tandem Axle, Aluminum Pumper/Tanker 2000 Gallon Body, 1500 GPM Pump $630,280.00
FS19BBB01 Slip In Unit: Complete Slip in firefighting package for flatbed or pickup bed. 100 GPM pump, 250 gallon poly tank. 150’ hose reel. $12,975.00
FS19BBB02
Skeeter Type 3 or 4 F-650: Brush unit, Large (33,000 gvw). Custom firefighting body. 750 gallon poly tank. 200-750 gpm pump. 150’ hose reel. Stainless steel plumbing. Hose tray.

Tool tray. Side body compartments.
$167,512.28
FS19BBB03
Skeeter Type 5 F-550: Brush unit, Medium (19,500 gvw). Custom firefighting body. 400 gallon poly tank. 200 gpm pump. 150’ hose reel. Stainless steel plumbing. Hose tray. Tool tray. Side body compartments.
$104,340.00
FS19BBB04
Skeeter Type 6 F-350: Brush unit, Small (13,000 gvw). Custom firefighting body. 300 gallon poly tank. 200 gpm pump. 150’ hose reel. Stainless steel plumbing. Hose tray. Tool tray.

Side body compartments.
$97,084.00
FS19BBB05 Type 5 Ram 5500 (19,000 GVW) Brush Unit Medium – 400 gallons/200 GPM pump.

Hose Reel. $103,040.00
FS19BBB06 Type 6 Ram 3500 (12,500 GVW) Brush Unit Small – 300 gallons/200 GPM pump.

Hose Reel $101,932.00
FS19BBB07 Type 3 International 7400 (35,000 GVW) Brush Unit Large – 750 gallons/200-750 GPM Pump. Hose reel. $153,692.00
FS19BBB08 Type 3 Freightliner M2 (37,000 GVW) Brush Unit Large – 750 gallons/200-750 GPM Pump. Hose reel. $153,089.00
FS19BBB09 Squad Rescue Ford F-450 - Small Rescue Body with (2) Front Vertical Compartments, (2) Rear Veritical Compartments and (2) Center Compartments $93,222.00
FS19BBB10 Squad Rescue Ram - 4500 Small Rescue Body with (2) Front Vertical Compartments, (2) Rear Veritical Compartments and (2) Center Compartments $95,822.00
FS19BBB11 Type 5 Chevy 5500 (19,000 GVW) Brush Unit Medium – 400 gallons/200 GPM pump. Hose Reel. $103,579.00
FS19BBB12 Type 6 Chevy 4500 (12,500 GVW) Brush Unit Small – 300 gallons/200 GPM pump.

Hose Reel $101,109.00
FS19BBB13 Type 3 Chevy 6500 (22,900 GVW) Brush Unit Large – 750 gallons/200-750 GPM Pump. Hose reel. $114,056.28
B. Wildland Fire Apparatus (Brush Fire)
BB. Skeeter
**These units can only be sold outside Texas**
DocuSign Envelope ID: CDB7A818-ECBC-480F-AB71-FDE7555316B0 p

COOPERATIVE PURCHASING PROGRAM
Houston-Galveston Area Council of Governments
3555 Timmons, Suite 120, Houston, TX 77027
Phone: 800-926-0234 Fax: 713-993-4548
www.hgacbuy.org
INVITATION TO SUBMIT COMPETITIVE: BIDS PRE-PROPOSAL INVITATION NO.: FS12-19 ISSUE DATE: June 27, 2019
CATEGORY: Fire Service Apparatus (All Types)

PURPOSE OF THIS INVITATION
The Cooperative Purchasing Program ( HGACBuy) of the Houston-Galveston Area Council of Governments is soliciting offerings for the furnishing of products/services as d e s c r i b e d h e r e i n . T h e s e p r o d u c t s / s e r v i c e s m a y b e purchased by any of more than 7000 member local governments, districts, agencies in 49 states across the nation.

Responses must be submitted in an original and one (1) copy, an d shall be subject to the terms, conditions, requirements and specifications detailed in the documents comprising this Invitation. Responses are scheduled to be opened publicly at H-GAC offices on the date indicated. For Bid Invitations, responses will be available for public review until 4:00 p.m. CT that day, and on subsequent days by appointment only. Any Responses submitted later than 1:00 p.m. on the due date will be returned unopened to the bidder/proposer.

PROCUREMENT SCHEDULE & DETAILS
DRAFT SPECIFICATION / INVITATION: May 1, 2019
PRE-BID/PROPOSAL CONFERENCE: June 5, 2019 @ 9:00 a .m. CT; H-GAC Offices FINAL SPECIFICATION / INVITATION: June 27, 2019
BID/PROPOSAL RESPONSES DUE: July 24, 2019 @ 1:00 p.m. CT; H-GAC Clock PUBLIC RESPONSE OPENING: July 24, 2019 @ 2:00 p.m. CT; H-GAC Clock RECOMMENDATIONS TO BOARD: October 15, 2019
CONTRACT START DATE & TERM: December 01, 2019 through November 30, 2021 The documents comprising this Invitation are available via web download at: https://www.hgacbuy.org/bids/ For assistance regarding this Invitation, please contact:

Name: Jackie Palmer Phone: 713-993-2466 E-mail: [email protected]

CONTENTS OF THIS INVITATION
SECTION A - General Terms & Conditions
SECTION B - Product/Service Specific Requirements & Specifications (Final) SECTION C - HGACBuy FORMS (Final)
SECTION D - Pro-Forma (Sample) Contract
This procurement conforms to government requirements for Competitive Procurement.

LABELING OF SEALED RESPONSE PACKAGE

IMPORTANT:

You must affix an identifying label to the outside of your Sealed Response Package to ensure proper identification and log-in at HGACBuy offices on receipt. HGACBuy i s n o t responsible for any response that might be lost or misdirected due to improper or unclear labeling. Your label should look as follows and should be affi xed conspicuously to the package.

H-GAC Cooperative Purchasing
Sealed Bid/Proposal No. FS12-19

DO NOT OPEN IN MAIL ROOM

Responses by E-mail or FAX will not be acceptable. Hard copies , as described herein, plus appropriate electronic media are required.

Revised: 04/16/18 Page 1 of 20

SECTION A

GENERAL TERMS & CONDITIONS

FOR BIDS AND PROPOSALS
INVITATION NO. FS12-19
DESCRIPTION: Fire Service Apparatus (All Types)

TABLE OF CONTENTS

1. INTRODUCTION ................................................................................................................................................ 2

2. DEFINITIONS, ABBREVIATIONS & ACRONYMS ........................................................................................ 2

3. NON-BINDING ORAL COMMENTS ................................................................................................................ 4

4. STRUCTURE OF RESPONSE ............................................................................................................................ 4

5. BASIC REQUIREMENTS & CONDITIONS ...................................................................................................... 4

6. OFFEROR'S AUTHORIZED SIGNATORY ....................................................................................................... 5

7. SURETY FOR INSURANCE .............................................................................................................................. 6

8. CONFIDENTIAL / PROPRIETARY MATERIALS ........................................................................................... 6

9. REFERENCES ..................................................................................................................................................... 6

10. INSURANCE ................................................................................................................................................... 6

11. OFFEROR CERTIFICATIONS ....................................................................................................................... 7

12. HISTORICALLY UNDERUTILIZED BUSINESS (HUB) PARTICIPATION.............................................. 7

13. NON-RESIDENT RECIPROCAL SALES ACT ............................................................................................. 8

14. TEXAS MOTOR VEHICLE COMMISSION CODE & LICENSING ............................................................ 8

15. INTENT AND SCOPE OF SPECIFICATIONS .............................................................................................. 8

16. REQUIREMENTS APPLICABLE TO PHYSICAL GOODS ......................................................................... 8

17. PRODUCT CODES ......................................................................................................................................... 8

18. SPECIFIC DESCRIPTIVE REFERENCES ..................................................................................................... 9

19. MANUALS ...................................................................................................................................................... 9

20. STANDARD FEATURES & OPTIONS ......................................................................................................... 9

21. WARRANTIES, SALES & SERVICE .......................................................................................................... 10

22. H-GAC ORDER PROCESSING CHARGE .................................................................................................. 11

23. PRE-PAYMENTS AND DISCOUNTS ......................................................................................................... 11

24. INSPECTION / TESTING ............................................................................................................................. 11

25. PRODUCT DELIVERY ................................................................................................................................ 11

26. OFFERED PRODUCT ITEM VARIANCES ................................................................................................ 11

27. REQUIREMENTS FOR SUBMISSION OF A RESPONSE ......................................................................... 11

28. CLARIFICATION TO SPECIFICATIONS & REQUIREMENTS ............................................................... 13

29. INCONSISTENT INFORMATION ............................................................................................................... 14

30. REJECTION OF RESPONSES ...................................................................................................................... 14

31. WITHDRAWAL OR MODIFICATION OF RESPONSES .......................................................................... 14

32. RESPONSE EVALUATION ......................................................................................................................... 14

33. ORDER OF PRECEDENCE PRIOR TO CONTRACT AWARD ................................................................ 15

34. AWARD OF CONTRACT ............................................................................................................................ 15

35. PRO-FORMA CONTRACT .......................................................................................................................... 15

36. CONTRACT TERM ...................................................................................................................................... 15

Revised: 04/16/18 Page 2 of 20

37. PERFORMANCE & PAYMENT BOND ...................................................................................................... 15

38. CHANGE ORDERS ....................................................................................................................................... 15

39. DUPLICATION OF TERMS OR STATEMENTS ........................................................................................ 15

40. PUBLICITY ................................................................................................................................................... 15

41. TAXES ........................................................................................................................................................... 16

42. DRUG FREE WORKPLACE ........................................................................................................................ 16

43. PRODUCT NOTICES & MAILINGS ........................................................................................................... 16

44. HANDLING OF ORDERS & PAYMENTS .................................................................................................. 16

45. PRICE CHANGES ......................................................................................................................................... 17

46. CONTRACT ITEM CHANGES .................................................................................................................... 17

47. FORCE MAJEURE ........................................................................................................................................ 18

48. PERFORMANCE UNDER CONTRACT ..................................................................................................... 18

49. CONTRACTOR ORIENTATION/TRAINING ............................................................................................. 18

50. LEGAL & CONTRACTUAL REMEDIES ................................................................................................... 19

51. NATIONWIDE SALES OPPORTUNITIES .................................................................................................. 20

1. INTRODUCTION
The Houston-Galveston Area Council ( H-GAC) is a "Government-to-Government" procurement service for States , State Agencies, Local Governments, Districts, Authorities, and qualifying Not-for-Profit Corporations (End Users).

End Users become Members o f t h e H-GAC Cooperative Purchasing Program ( HGACBuy) by executing an Interlocal Contract, which is free of cost and evergreen unless cancelled. HGACBuy, acting on behalf of Members, is soliciting competitive offerings for the furnishing of pro ducts and/or services, as described elsewhere, which MAY be purchased by Members during the contract term. Members using the Program issue purchase orders directly to HGACBuy contractors.

2. DEFINITIONS, ABBREVIATIONS & ACRONYMS
The following definitions, abbreviations and acronyms may be found in these specifications, and shall be interpreted herein as specified below.

Definitions and Abbreviations:

Acceptance. Acceptance takes place when the End User agrees with the Contractor that the terms and conditions of the contract have been met and verified. Acceptance is not the same as Receipt, and can only occur after intact shipping, inspection by End User, and any onsite testing that has been stipulated as part of the order Aggregate/Single Occurrence. The term "aggregate" in insurance terms is the sum of all claims against a specific policy for a specific loss incident. The term "single occurrence" differentiates between multiple claims and single claims against a specific policy. The inherent value of a poli cy's aggregate value is less important to an End User than is the value of a single claim as stated under "single occurrence." Approved. Acceptable to the "authority having jurisdiction." ARO. “After Receipt of Order”. Use d in conjunction with a defined t i m e p e r i o d ( u s u a l l y d a y s o r w e e k s ) t o establish the delivery or lead time pursuant to any individual purchase transaction. In the case of orders for bodies which will be mounted on a customer furnished cab/chassis, the t e r m A R O s h a l l b e c o n s t r u e d t o m e a n “ A f t e r Receipt Of Cab/Chassis”.

Authority Having Jurisdiction. The authority shall be either H-GAC or the relevant End User based on the requirements as stated in each specification item. Unless specifically stated, the authority shall be H-GAC.

Bidder. Any entity that submits a competitive bid to this Invitation. (See also "Offeror") Change Order. Request by an End User for a change in the composition of an already submitted purcha se order, for example to change quantity ordered, add or delete items, etc.

Contract. Specifically, a contract between H-GAC and a successful Offeror which is executed based on an award made pursuant this Invitation.

Revised: 04/16/18 Page 3 of 20

Contract Pricing Worksheet. The standard H-GAC form to by used by Contractor in preparing a quotation to an End User, upon which End User's purchase order will be based. Contractor may use another quotation form provided it contains required information, and only if approved by H-GAC.

Contractor. The contracted business entity responsible for fulfilling a contract executed pursuant to this Invitation.

Dealer/Distributor. A duly authorized and/or franchised business entity which sel ls and services a manufacturer’s product in a specified marketing area.

Defect. A discontinuity in a part or a failure to function that inter feres with the service or reliability for which the part was intended.

Electronic Media. As used herein, means computer based media such as 100mb Zip Disk, CDRom, e-mail, e-mail attachment, file downloaded from the web, etc.

End User. (See "Participant" and “Member”)
Listed. Equipment or materials included in a list published by an orga nization, acceptable to the "Authority Having Jurisdiction" and concerned with product evaluation, that condu cts periodic inspection of production of listed equipment or materials and whose listing states either that the equipment or materials meet appropriate standards or has been tested and found suitable for use in a specified manner. NOTE: The means for identifying listed equipment may vary for each organization concerned with product evaluatio n, some of which do not recognize equipment as listed unless it is also labeled. The "authority having jurisd iction" should utilize the system employed by the listing organization to identify a listed product.

Manufacturer. The person or persons, company firm, corporation, partnership, or other organization responsible for taking raw materials or components and making a finished product.

May. A term indicating a permissive use or an acceptable alternative to a specified requirement.

Member. An authorized Participant in the Program. (See "Participant" and “End User”) Motor Vehicle. The meaning of this term shall be based on the legal definiti on ascribed to it by the laws and/or regulations of the state in which any specific sale made pursuant to a Contract takes place.

Must. A term indicating a mandatory requirement.

Offer or Offering. Any product or service offered in reply to this Invitation.

Offeror. Any entity that submits a competitive bid or proposal in response to this Invitation. Bidder or Proposer.

Participant. Generally, any qualifying governmental or non-profit entity which has executed an Interlocal Contract for cooperative purchasing services with H-GAC.

Product Liability Insurance. Failure of Components and/or assembled equipment resulting in personal injury, disability or death and/or property damage is covered under the product liability insurance provisions.

Product or Product Item. Any of the specific goods, materials, equipment or service(s) specified in this Invitation.

This term encompasses the base line item itself, and any and al l accessories, options, modifications, ancillary services, assembly, testing, etc. that may be included in the delivered Product.

Proposer. Any entity that submits a competitive proposal in response to this Invitation. (See also "Offeror") Purchaser. The End User having responsibility for the specification, requisition, orde ring and acceptance of the Product or Service. (See also "End User")
Purchasing Authority. The agency that has sole responsibility and authority for neg otiating, placing and, if necessary, modifying any solicitation, purchase order, or other award issued by a governing body [H-GAC].

Quotation. See "Contract Pricing Worksheet".

Receipt. Receipt takes place when a Product or Service is delivered to an End User and a document is executed that establishes that the Produ ct is now in the possession of t he End User or that the Service has been completed.

Receipt DOES NOT connote or imply Acceptance.

Response. All or part of any offering submitted in response to this Invitation.

Shall. A term indicating a mandatory requirement or action.

Should. A term indicating a recommended or advised response to a specified requirement.

Vendor. A manufacturer's representative or dealer authorized to make sales and supply parts and service.

Acronyms:

ANSI = American National Standards Institute
ASTM = American Society for Testing and Materials
ASME = American Society of Mechanical Engineers
CFR = U.S. Code of Federal Regulations

Revised: 04/16/18 Page 4 of 20

DOJ = U.S. Department Of Justice
DOT = U.S. Department Of Transportation
EPA = U.S. Environmental Protection Agency
FAA = Federal Aviation Administration
FMVSS = U.S. Federal Motor Vehicle Safety Standards
H-GAC = Houston-Galveston Area Council of Governments
IEEE = Institute of Electrical and Electronics Engineers MVD = Motor Vehicle Division of Texas Department of Transportation NFPA = National Fire Protection Association
NHTSA = National Highway Traffic Safety Administration
NIOSH = National Institute For Occupational Safety And Health NIST = National Institute of Standards and Technology
NTEA = National Truck Equipment Association
OSHA = U.S. Occupational Safety and Health Administration RRC = Railroad Commission of Texas
SAE = Society of Automotive Engineers
TBPC = Texas Building and Procurement Commission (formerly GSC) TxDOT = Texas Department Of Transportation
UL = Underwriter's Laboratories Inc.

VTCS = Vernon's Texas Civil Statutes

3. NON-BINDING ORAL COMMENTS
No oral comment, utterance or response made by any employee, member, or agent of H-GAC or any Member of the Cooperative Purchasing Program shall be considered factual or binding with regard to this Invitation, or any contract awarded as a result of this Invitation. Valid and binding term s, conditions, provisions, changes or clarifications, or requests thereof, shall ONLY be communicated written form.

4. STRUCTURE OF RESPONSE
Depending on the Product or Servi ce, market structures and sale s practices can differ substantially. For example, dealers may sell into any market or may be restricted to certai n territories, manufacturers may sell direct or may be limited by law to selling thru independent dealerships, etc. H-GAC’s objective is to ensure that End Users , no matter where located, can buy contracted products/services and receive quality and timely service and support, while at the same time allowing for the most appropriate and effectiv e response to this Invitation. Therefore, responses to this Invitation will be accepted in conformance with the following scenarios and requirements:

A. Single Respondent Acting Alone Or As "Lead" For A Group:

Offeror shall complete and sign a Form A and, if contracted, shall be solely responsible for all contra ctual requirements including administration, processing of purchase o rders and handling of payments for transactions which may involve other dealers who actually deliver the products or services.

B. Multiple Respondents Acting Jointly:

A single Response shall be submitted, and each party to the Response shall complete and sign a separate Form A to be included in the single Response. If the Response is suc cessful each party shall sign a separate contract with H-GAC and shall be responsible for compliance with all terms and con ditions. Only those which have executed a written contract with H-GAC may process purchase orders and payments.

In any event, Offeror may be a party to one, and only one, response.

5. BASIC REQUIREMENTS & CONDITIONS
a. The final requirements and specifications contained herein may be different, perhaps materially, from those in the “Invitation To Attend Pre-Bid / Pre-Proposal Conference”, i f any. It is Offeror’s sole responsibility to thoroughly examine and review a ll documentation associated with this Invitation, including any Addendums, and to insure that any response submitted complies in every respect with all requirements.

Revised: 04/16/18 Page 5 of 20

b. Any Addendum to this Invitation which may be required prior to the Response due date will be delivered to those prospective Offerors of record who have previously obtain ed a copy of this Invitation from H-GAC.

Prospective Offerors shall be responsible for obtaining all documents relating to submission of a Response. c. Offeror shall thoroughly examine any drawings, specifications, schedul es, instructions and any other documents, supplied as a part of this Invitation, and is solely responsible for understanding and compliance. d. H-GAC shall not be liable for Offeror's incomplete documentation, or for any costs associated with preparation and submission of any Response hereto. Additionally, all components of any Response become the property of H-GAC, and shall be considered to be in the public domain. e. Offeror shall make all investigations necessary to become thoroughly i nformed regarding any plan and/or infrastructure that may be required to support delivery of any Product or Service covered by this Invitation. No plea of ignorance by Offeror stemming from failure to investigate conditions that may now o r hereafter exist, shall be accepted as a basis for varying H-GAC's requirements , or Offeror's/Contractor's obligations or entitlements.
f. Requests for changes to the requirements or specifications here in must be in writing (e-mail, fax, letter) and must be received by H-GAC no later than fifteen (15) calendar days prior to the Response Due Date. H-GAC will review such requests, but may or may not make changes at its sole discretion. Changes, if any, will only be made by written Addendum sent to addressees of record. In any event, it is Offeror's sole responsibility to insure that any and all Addendums which may have been issued have been received and addressed. g. By submission of a response, Offeror expressly understands and agrees that all terms and conditions herein will be part of any subsequent contract that is executed pursuant to this Invitation. h. Offeror is advised that all H-GAC contracts are subject to the le gal requirements established in any applicable Local, State or Federal statute.
i. Offeror/Contractor must be in compliance with all licensing, permitting, registra tion and other applicable legal or regulatory requirements imposed by any governmental au thority having jurisdiction. It is Offeror/Contractor’s responsibility to insure that this requirement is met, and to supply to H-GAC upon request, copies of any license, permit or other documentation bearing on such compliance. j. Unless otherwise established elsewhere in this Invitation, NO m inimum purchase quantities or spending levels are provided or guaranteed by H-GAC or any End User.
k. This Invitation is not meant to restrict competition, but rather is intended to allow for a wide range of responses. l. Responses which are 'qualified' with conditional clauses or alt erations of or exceptions to any of the terms and conditions in this Invitation may be deemed non-compliant at H-GAC's sole discretion. m. The term ‘ Offeror’, or derivative thereof, shall become synonymous with ‘ Contractor’ for any successful Offeror recommended for a contract pursuant to this Invitation. n. H-GAC reserves the right to:
 Reject any and all offers received in response to this Invitation.  Reject any part of an offer received in response to this Invitation.  Determine the correct price and/or terminology in the event of any discrepancies in any response.  Accept a response from, and enter into agreement with, other than the lowest price Offeror.  Accept responses and award contracts to as many or as few Offerors as H-GAC may select.  Amend, waive, modify, or withdraw (in part or in whole) this Invitation, or any requirements herein.  Hold discussions with Offerors, although award may be made without discussion.  Request an Offeror to give a presentation of the Response at a time and place scheduled by H-GAC.  Exercise any of these rights at any time without liability to any Offeror. o. H-GAC reserves the right to determine that conditions exist which pr event the public opening of responses on the date and at the time advertised, and to reschedule the publ ic opening for a future date and time. Responses received by H-GAC by the original deadline will be secured unopened until the re scheduled opening date and time, and those having timely submitted such responses will be notified.

6. OFFEROR'S AUTHORIZED SIGNATORY
The signatory shall be authorized to sign and contractually bin d Offeror, and shall sign any and all Response documentation requiring a signature.

Revised: 04/16/18 Page 6 of 20

7. SURETY FOR INSURANCE
Contractor shall be responsible for using a surety company properly licens ed by any and all states in which Contractor will do business with Participants. The surety company shall not expose itself to any loss on any one risk in an amount exceeding ten percent (10%) of its surplus to poli cy holders, provided any risk or portion of any risk shall have been reinsured, and such reinsurance shall be deduct ed in determining the limitation of risk applicable to H-GAC's insurance requirements.

8. CONFIDENTIAL / PROPRIETARY MATERIALS
All documentation submitted as part of Offeror's response to this Invitation will be considered to be in the pu blic domain and may be made available to Members and others, after contract award, upon properly submitted request. If Offeror submits documents marked “confidential” or “proprietary”, the Response may be deemed non-compliant.

9. REFERENCES
a. Offeror shall list the names of at least five government agencies with in the continental United States which have purchased from Offeror products or services similar to those covered by this Invitation, within the last two years. H-GAC reserves the right to determine if such products or services are appropriately similar. b. Offeror may provide reference informati on in whatever format desired, but each should include the following specific information:
 Agency name
 Contact person name
 Address
 Phone & Fax numbers
 Description of product(s) or service(s) and date sold c. Other information, including criticism however learned, may be used by H-GAC in evaluation of responses.

10. INSURANCE
a. Unless otherwise stipulated in Section B, Offeror/Contractor must have the following insurance and coverage minimums:

General liability insurance with a Single Occurren ce limit of at least $1,000,00 0.00, and a General Aggregate limit of at least two times the Single Occurrence limit.

Product liability insurance with a Single Occurren ce limit of at least $1,000,00 0.00, and a General Aggregate limit of at least two times the Single Occurrence limit for all Products except Automotiv e Fire Apparatus. For Automotive Fire Apparatus, see Section B – Product Specific of this Invitation.

Property Damage or Destruction insurance is required for coverage of End User owned equipment while in Contractor's possession, custody or control. The minimum Single Occurren ce limit is $500,000.00 and the General Aggregate limit must be at least two times the Single O ccurrence limit. This insurance may be carried in several ways, e.g. under an Inland Marine policy, as part of Automobile coverage, or under a Garage Keepers policy. In any event, this coverage must be specifically and c learly listed on insuran ce certificate(s) submitted to H-GAC.
b. Insurance coverage shall be in effect for the length of any con tract made pursuant to this Invitation, and for any extensions thereof, plus the number of days/months required to deliver any outstanding order after the close of the contract period.
c. Original Insurance Certificates must be furnished to H-GAC on request, showing Offeror/Contractor as the insured and showing coverage and limits for the insurances listed above. d. If any Product(s) or Service(s) will be provided by parties oth er than Offeror/Contractor, all such parties are required to carry the minimum insurance coverages specified her ein, and if requested by H-GAC, a separate insurance certificate must be submitted for each such party. e. H-GAC reserves the right to contact insurance underwriters to confir m policy and certificate issuance and document accuracy.

Revised: 04/16/18 Page 7 of 20

11. OFFEROR CERTIFICATIONS
Offeror, by submission of a Response hereto, makes the followin g certifications under penalty of perjury and possible contract termination if any of these certifications are found to be false.

Non-Collusive Response
a. The prices in the Response have been arrived at independently without collusion, consultation, communication, or agreement for the purpose of restricting competition, as to any matter relating to such prices with any other Offeror or potential competitor.
b. The prices which have been quoted in the Response (unless other wise required by law), have not been knowingly disclosed by Offeror and will not be knowingly disclosed by Offeror prior to the public response opening, either directly or indirectly, to any other Offeror or competitor. c. No attempt has been made or will be made by Offeror to induce any other person, partnership or corporation to submit or not to submit a response for the purpose of restricting competition.

Non-Biased Specifications
This Invitation contains no requirements considered to be undul y biased in favor of Offeror or any other Offerors that may be competing for this procurement.

No Financial Interest or Other Conflict
a. No H-GAC officer, employee, Board of Directors member or member of any H-GAC board or commission, nor family member of any such person, has a financial interest, direct or indirect, in Offeror or in any contract Offeror might enter into with H-GAC.
b. No economic or employment opportunity, gift, loan, gratuity, special discount, trip, favor or service has been, or will be, offered or given to any officer, employee, Board of Directors member, or member of any H-GAC board or commission, nor to any family member of any such person.

Debarment and Suspension Status
a. Offeror is not currently debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded from covered transactions by any government agency, no r is Offeror an agent of any person or entity that is currently debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded from covered transaction by any government agency.
b. Offeror has not within a three year period preceding this Invitation b een convicted of or had a civil suit judgement renedered against Offeror for commission of fraud or a cr iminal offense in connection wi th obtaining, attempting to obtain or performing a public transact ion or contract under a public transaction; violation of federal or state antitrust statutes or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statement, or receiving stolen property. c. Offeror is not presently indicted for or otherwise criminally or civil ly charged by a government entity (federal, state, or local) with commission of any of the offenses enumerated above. d. Offeror has not, within a three year period preceding this Invi tation, had any government (federal, state, or local) transactions terminated for cause or default.

Insurance Coverages
Offeror has and will maintain insurance coverage in accordance with the requirements of this Invitation.

Licensing & Permits
Offeror(s) has (have) all licenses and/or permits, required by any and al l governmental entities having jurisdiction, to legally sell the products/services offered.

12. HISTORICALLY UNDERUTILIZED BUSINESS (HUB) PARTICIPATION a. To satisfy Texas' statutory requirements [Government Code, Chapter 2161, Subchapter D], H-GAC requires all Offerors to supply information in any bid/proposal response listing (1) the total number of subcontracts and (2) the total number of HUB contracts applicable to the Products or S e r v i c e s o f f e r e d i n t h e r e s p o n s e . L o c a l governments often require this information for their own report ing requirements prior to placing orders through the H-GAC Cooperative Purchasing Program.
b. Offeror must complete Form B and include subcontracts with HUB’s that provide any materials or services related to sales that may be made thru H-GAC’s Cooperative Purchasing Program.

Revised: 04/16/18 Page 8 of 20

13. NON-RESIDENT RECIPROCAL SALES ACT
As required by Texas Civil Statutes in the award of contracts, an offeror which is not a Texas resident business must determine if its state of residence prohibits award of governme nt contracts to Texas resident offerors without penalty. If Offeror’s resident state DOES penalize Texas offerors, Offeror must provide this information along with a copy of its applicable resident state's statute in the Response.

14. TEXAS MOTOR VEHICLE COMMISSION CODE & LICENSING
Sales of motor vehicles in the State of Texas are subject to th e Texas Motor Vehicle Commission Code. If this Invitation includes any motor vehicle to be sold in the State o f Texas, Offeror certifies by submission of a response hereto that all required Texas Motor Vehicle Commission license s are in place and current, and that copies of all such licenses have been submitted with the Response. Further, it shall be Contractor's responsibility to keep current all required Texas Motor Vehicle Commission licensing d uring the term of the contract, and to furnish license copies at any time on request by H-GAC. I f Contractor does not maintain current licensing, H-GAC reserves the right to immediately terminate the contract.

NOTE: In accordance with the Texas Motor Vehicle Commission Code, c ontracts for motor vehicles to be sold within the state of Texas may be made ONLY with properly licensed Texas Motor Vehicle Dealers. Therefore, to be considered for a contr act covering Texas End Users, the Response must include a Form A from a licensed Texas Motor Vehicle Dealer

15. INTENT AND SCOPE OF SPECIFICATIONS
a. The intent of the specificat ions herein is to provide Offeror with sufficient information concerning the Products/Services to be contracted such that Offeror can prepare and submit an acceptable Response. b. The specifications may be detailed or general in nature with regard to any particular Product/Service. Where not otherwise specified, details of construction, materials, or the way in which services will be provided, are left to the discretion of the Offeror, provided only that any offering shall conform, as a minimum, to best Industry standards and practices and to what is currently being sold in the marketplace. c. Responses shall be considered only from Offerors that have established good reputations in their markets, and who furnish satisfactory evidence of ability to supply the Products/Services specified herein. d. Offeror shall show proof of ability to provide to End Users prompt and competent service, including parts if applicable, for all Products/Services covered by this Invitatio n, by proper completion of a Service Organization Document as described elsewhere herein.

16. REQUIREMENTS APPLICABLE TO PHYSICAL GOODS
In the case of physical goods (e.g. equipment, material, suppli es, as opposed to services), all Products offered must, unless otherwise stipulated in Section B:
a. Be new, unused, and not refurbished.
b. Not be a prototype insofar as the general design, operation and performance. This requirement is NOT meant to preclude Offeror from offering new models or configurations which incorporate i mprovements in a current design or add functionality, but which in such new model or configuration may be new to the marketplace. c. Include any and all accessories which may or may not be specifi cally mentioned herein, but which are normally furnished or which are necessary to make a delivered Product re ady for its intended use. Such accessories shall be assembled, installed and adjusted such that the Product is ready for continuous operation at time of delivery. d. Have assemblies, sub-assemblies and component parts that are st andard and interchangeable throughout the entire quantity of a particular Product as may be purchased simultaneously by any individual End User. a. Be designed and constructed using current industry accepted engineering and safety practices, and materials. b. Be available for inspection at any time prior to or after procurement.

17. PRODUCT CODES
Unless otherwise addressed in Section B of this Invitation, the following requirements shall apply:

Revised: 04/16/18 Page 9 of 20

a. Each Product/Service offered shall be uniquely identified using a n H-GAC Product Code, which shall be determined as described in Section B of this Invitation. Offeror s h a l l o f f e r O N L Y O N E P r o d u c t f o r a n y particular Product Code. For example, Offeror may wish to submit a bid for Product Code ABC and may have another offering that also meets the requirements for ABC. Offeror MAY NOT submit two offerings for ABC.

The alternate offering that also meets the requirements for ABC must be offered as an option "upgrade/downgrade" to ABC on Form E.
b. Pricing for optional upgrades or downgrades to base bid items s hould be quoted as an “adder” or “deduct” amount as appropriate, to be applied to the offered price of the base Product Item listed on Form D. c. Base bid items and their associated HGACBuy Product Codes are included in the Section B and/or on Form D. d. Selection of Product Codes for which to submit an offer is at Offeror’s sole discretion.

18. SPECIFIC DESCRIPTIVE REFERENCES
Except for Base Product Items listed on Form D, any reference to a specific cat alog, data sheet, form, brochu re, model name or number, etc. used herein to describe an item such as an option or accessory is only descriptive and is not to be considered restrictive unless otherwise noted. Such references are normally used only to indicate a type, general description, level of quality and/or required performance standards.

19. MANUALS
Unless otherwise specified or superceded herein, each Product d elivered under an H-GAC contract, and if applicable any options thereto, shall be supplied with at least one (1) copy of a safety and operating manual. The cost of any such manuals must be included in the base price for any Product Item offered hereunder. If more detailed and technically orientated parts and maintenance manua ls are available for a Product or option, at a cost, they shall be offered as options on the FORM designated herein for such options, or elsewhere in the Respon se as may be directed herein.

20. STANDARD FEATURES & OPTIONS
The following requirements are applicable primarily to physical goods.

Standard Features
a. The stated minimum requirements for all Products listed herein include what H-GAC c o n s i d e r s t o b e “standard” features. Even though such features might normally be offered as options rather than as standard, they are nonetheless considered to be standard in this Invitati on, and must be included in the base price for any Product offered. Such features SHOULD NOT be offered as options except as deducts for their omission fro m the base Product.
b. If it is unclear in the Response that an H-GAC standard feature is included in the base price, it will be ass umed that such is the case. If awarded a contract Offeror will be expected to sell the Product with all H-GAC specified standard features included in the base price. c. Any feature or accessory normally offered by manufacturer as "standard" shall be considered a standard feature and shall be included in the base price of any offering, even t hough not specifically listed as a requirement in H-GAC’s specifications. Such features SHOULD NOT be offered as options except as deducts for their omission from the base Product.

Options - General
a. Options are considered to be any features or accessories, other than H-GAC's and Manufacturer's "standard" features or accessories.
b. Options should be offered on the FORMS designated for quoting options. Each option should be listed and described on a separate line , and should include any Manufacturer's/Dealer's code number. I f no Manufacturer's/Dealer's code number exists, Offeror should create one. c. Prices for all offered options shall be assumed to include any installation or mounting required to make it a fully functional component of the Product, unless otherwise stated in Offeror's response.

Required Options

Revised: 04/16/18 Page 10 of 20

a. Product specifications in this Invitation may include H-GAC "Required Options". If so, Offeror must quote a price for ALL such options, and, if there is an H-GAC Option Code provided in this Invitation for such options, it MUST be used as part of the description.
b. For any specific "Required Option", Offeror may quote an equivalent so long as its design and performance are as good as, or better than, the specified option item. Response s which do not include pricing for Required Options may be considered non-compliant.

Other Options
a. "Suggested" or "Other" options may be listed for any particular Product in this Invitation, and Offeror i s encouraged to quote pricing for such options. The extent of of fered options in any response may be taken into consideration as part of the award criteria, at H-GAC's sole discretion. b. Offeror is encouraged to include options for non-equipment items that may be applicable to a sale, such as:

Extended Warranties, Maintenance Agreements, Buy-back or Trade- In Agreements, Out-of-state Delivery Charges, Quantity or Special Discounts, Extended Training Classes, etc.

Published & Unpublished Options
a. H-GAC Cooperative Purchasing Program (Program) contracts are aw arded through a public competitive bid or proposal (RFP) process. Further to that process, Program polic y considers an 'option' listed and priced in a bid or RFP Response: (1) To be a " Published Option"; (2) To be part of any awarded contract; and (3) To be available for purchase by Program members separately and indepe ndently from associated base line items.

However, since Published Options may have not been subjected to the same scrutiny as the associated base line items, it cannot be concluded they were directly competed. The refore, pursuant to Local Government Code 252.021(a), purchase of a published option costing more than $5 0,000 shall not be allowed. Furthermore, H-GAC reserves the right at its sole discretion to disallow purchase of any Published Option through the Program if deemed contrary to the intent of the law.
b. Any option that has not been listed and priced in the Response is considered to be an “ Unpublished Option”.

Unpublished Options may be sold, but only in connection with th e sale of a base Product Item, and only insofar as the total cost of all Unpublished Options remains below twen ty five percent (25%) of the total summed cost of the base Product(s) plus any Published Options.
c. No Published or Unpublished Option may be sold which essentiall y converts a Product such that it competes with a Product Item awarded to another contractor.

21. WARRANTIES, SALES & SERVICE
Unless otherwise addressed in Section B, the following requirements shall apply:
a. Offeror must be a properly franchised dealer authorized to sell and service, including warranty service, all products offered and sold in response to the bid invitation or under any H-GAC contract. b. Offeror shall provide detailed Parts and Labor Warranty information wi th the Response. If Offeror submits a warranty with the Response which does not meet the minimum requ irements herein, Offeror agrees by submission of a Response that such warranty shall be considered to be amended to meet those minimums. c. Warranties shall be manufacturer's standard and shall be inclus ive of any other warranty requirements which may be stipulated elsewhere herein.
d. Any warranties offered by a dealer shall be in addition to the manufacturer’s standard warranty, and shall not be a substitute for such. Offeror's base price for any Product shall be inclusive of the standard warranty. e. Complete warranty information will be supplied to End User with each Product sold. a. Warranties need not apply to normal maintenance service or adjustments, or to any product reasonably shown to have been repaired or altered in any way so as to affect its st ability, or to any product which has been subject to misuse, negligence, or accident.
f. Offeror/Contractor is encouraged to offer extended warranties as an option. g. Neither H-GAC n o r End User assume any warranty or liability on Contractor’s behalf unless made or assumed in writing, initiated by Contractor, and agreed to in writing by H-GAC or the End User respectively. h. Contractor shall be responsible for the execution and effectiveness of all product warranty, and shall be the sole source for solution to problems arising from warranty clai ms. Contractor agrees to respond directly to correct warranty claims and to ensure reconciliation of warranty claims that have been assigned to a third party.

Revised: 04/16/18 Page 11 of 20

22. H-GAC ORDER PROCESSING CHARGE
H-GAC will levy an Order Processing Charge on Contractor for each sale done thru the H-GAC contract, with the exception of orders for motor vehicles . Any bid pricing submitted will be considered to include the Charge. The amount of the applicable charge shall be per the most current H-GAC schedule. For motor vehicle orders, the Processing Charge shall be levied on and paid by the End User.

23. PRE-PAYMENTS AND DISCOUNTS
a. Progress, pre-payment and special discounts of any kind may be offered and detailed in the Response. Such discounts shall be clearly explained, but shall not be a determ ining factor in awarding contracts except in the case of tie offerings.
b. Quantity discounts applicable to similar Products sold to one o r more End User Departments may be offered.

Determination as to product similarity shall rest solely with Contractor. c. For specific purchases, any proposed quantity, pre-payment or s pecial discounts shall be clearly shown on the Contract Pricing Worksheet.

24. INSPECTION / TESTING
All Products sold pursuant to this Invitation shall be subject to inspection/testing by or at the direction of H-GAC and/or the ordering End User, either at the delivery destination or the place of manufactur e. In the event a Product fails to meet or exceed all requirements of this Invitation, an d unless otherwise agreed in advance, the cost of any inspection and/or testing, shall be borne by the Contractor.

25. PRODUCT DELIVERY
Unless otherwise addressed in Section B, the following requirements shall apply:
a. Title to goods, and responsibility and liability for loss and/o r damage in shipping pass to End User at the delivery destination after receipt and acceptance have taken pl ace. Cost of shipping/delivery shall be paid by End User unless otherwise agreed to by Contractor. If Contractor will be paying for shipping/delivery, shipping terms must be "F.O.B. Destination, Freight Prepaid". If End User will be paying for shipping/delivery, shipping terms must be “F.O.B. Destination – Freight Collect”. b. The details for the application and calculation of shipping and delivery charges must be stated in the Response on Form E. Any freight, shipping or delivery charged to End User will be prepaid and added to the invoice, and will be clearly shown an any Contract Pricing Worksheet or other quote presented to the End User. c. The estimated delivery time afte r receipt of order (ARO), inclu sive of Saturdays, Sundays and holidays, for all Products offered must be stated in the Response. Actual delive ry for any particular order must be confirmed with End User at time of order placement, and must be stated clearly on the Contract Pricing Worksheet. d. Contractor shall be responsible for delivery and Acceptance according to the requirements of the Contract and the Purchase Order.
e. Contractor shall advise End User prior to making any shipment/delivery, and shall make such shipment/delivery in accordance with End User's requirements, providing only that such arrangements do not contravene any requirement of the H-GAC contract unless agreed to by Contractor. f. The execution of all required tests, certifications and/or lice nsing, and costs thereof, shall be the responsibility of Contractor. Upon request by End User o r H-GAC, Contractor shall provide any documentation or certification related to such tests, certifications or licensing.

26. OFFERED PRODUCT ITEM VARIANCES
Any variance in the specifications or performance of Products o ffered pursuant to this Invitation shall be acceptable to H-GAC only insofar as it MEETS or EXCEEDS the specifications and requirements of this Invitation.

27. REQUIREMENTS FOR SUBMISSION OF A RESPONSE
Unless otherwise addressed in Section B, the following requirements shall apply:
a. Responses shall be submitted in two complete printed sets inclu ding an Original and one (1) Copy in separate "hard side" three-ring binders. The outer spine of each binder shall be labeled showing this Invitation No., Offeror Name, and either "Original" or " Copy", as applicable. The Ori ginal printed response will be

Revised: 04/16/18 Page 12 of 20

considered to be the binding Response in case of any conflicts between printed copies and electronic copies.

Except for required forms, H-GAC Invitation documents should not be included in the Response. b. The Original and the Copy shall be submitted complete, except t hat the Electronic Media should be submitted only with the Copy.
c. All required H-GAC FORMS and documents shall be properly completed, without exception o r Offeror’s Response may be deemed non-compliant. Offeror may not modify the format of any H-GAC FORM in any way. Offeror may photocopy or print blank FORMS as needed. Information submitted on the printed copies of the FORMS may not be handwritten except for signatures and initials. It is Offeror's responsibility to insure that printed FORMS are clear and legible. Handwritten and illegible entries may be rejected. Offeror's printed, stamped or typed name shall appear on every FORM submitted in the Response. d. The entire response submission shall also be submitted on electronic media, including all requ ired H-GAC FORMS. Offeror is strongly advised to make and work with copies of the origin al electronic FORMS. The originals can then be used to make additional electronic or pri nted copies of the blank FORMS. Signatures are not required on the electronic FORMS.
e. The Response shall include ample written evidence, in the form of technical specifications, cut/tear sheets, brochures, pictures, drawings, etc., to demonstrate that all specifications herein have been met and/or exceeded. f. The Response shall include, in any format desired, an overview of the Service Organization which will support Products sold under any H-GAC contract. The overview must include facility locations, phone numbers and Service Manager names, as well as the following:
- The procedure to be used by an End User requiring repairs. - Typical turn-around time on repairs.
- Service Department days and hours of operation.
- Number of qualified / factory trained service personnel normally on hand. - Description of the parts inventory on hand.
- Training services, facilities and personnel available. g. Responses shall be enclosed in a sealed package(s) addressed to the Houston-Galveston Area Council, Cooperative Purchasing. The following information shall be stated on the exterior of the package(s):
 Name and address of Offeror.
 Date and hour of public response opening.
 Bid/Proposal Invitation number.
 The statement: "SEALED BID/PROPOSAL, DO NOT OPEN IN MAIL ROOM".

H-GAC shall not be responsible for any Response not properly labeled. h. Submission of a COMPLETE Response by telegraphic or electronic transmission is not acceptable. However, Responses may be modified by telegraphic or electronic notice i f such notice is received prior to the deadline for submission.
i. Samples, when required, shall be submitted within the time spec ified and at no expense to H-GAC. If not destroyed or consumed during testing, samples will be returned upon request at Offeror's expense. j. Offeror shall provide firm contract pricing for all Products and Options being offered. k. If applicable, responses shall include copies of all current li censing which may be requ ired by the Texas Motor Vehicle Division for execution of sales pursuant to any contract with H-GAC. l. Due to the complexity of responses and to aid in evaluation, th e Response should contain ALL required information in tabbed sections as detailed below. Omission of any required FORM or information will be sufficient grounds for H-GAC to consider your response to be non-compliant. m. First Section:
 Form(s) A – Offeror Identification & Signatory: Identifies the offering party(ies), and should be completed by each party to the Response. If awarded, a contract will be executed with each.  Form B – Historically Underut ilized Business Enterprises: Used to collect information about disadvantaged and minority suppliers and subcontractors, and to commit Offeror to working with Participants toward their program goals.
 Form C – Response Checklist: Certification, and also an aid, to insure that all required i nformation has been included in your Response.

Revised: 04/16/18 Page 13 of 20

 Form W-9 – Request for Taxpayer Id entification Number and Certi fication: Should be completed by each party to the response.
 Form CIQ – Conflict Of Interest Questionnaire: Chapter 176 of the Texas Local Government Code requires vendors and consultants contracting or seeking to cont ract with H-GAC to file a Conflict of Interest Questionnaire (CIQ) if they have an employment or othe r business relationship with an H-GAC officer or an officer’s close family member. The required ques tionnaire is located at the Texas Ethics Commission website: http://www.ethic s.state.tx.us/whatsnew/conflict_forms.htm. It is Bidder's responsibility to download the form and furnish a completed copy with the Response.  Form 1295 – Certificate of Interested Parties – Must be filled out electronically with the Texas Ethics Commission’s online filing application, printed out, signed and provided from each entity that has submitted a Form A for this submission.
 House Bill HB 89 Verification Form – completed and signed and provided from each entity that has submitted a Form A for this submission.
 References, formatted as described elsewhere herein.
 Service Organization Document, formatted as described elsewhere herein.

Second Section:
 Form D – Offered Items Pricing: For Bids, contains the list of the Product Items covered by thi s Invitation. Select the items offered and fill in the price for each. (For RFPs, follow the instructions in Section B as this Form may or may not be used.)
 Form E – Published Options: Used to list and price all offered options. List, each on a se parate line, all upgrades, downgrades, optional equipment, features, accessories and services which you desire to sell thru the H-GAC contract, if awarded. Published catalogs/price sheets may be listed, along with the discount structure that will apply. (For RFPs, follow the instructions i n Section B as this Form may or may not be used.)
Third Section:
 Technical Specifications, Product Brochures, Tear Sheets, Cut Sheets, Strippers, etc. which clearly list and show all the standard features and capabilities of each Product Item offered on Form D.  Warranty Documentation, as described elsewhere herein, for all items offered.

Fourth Section:
 Copies of any applicable Texas MVD Licenses.
 Electronic Media, containing the complete response including all required FORMS, stored in a pouch or an envelope such that it will not fall out of the binder. (Required in 'Copy' only, not in 'Original'.) n. By submittal of Response, Offeror certifies to the best of its knowledge that all information is true and correct.

28. CLARIFICATION TO SPECIFICATIONS & REQUIREMENTS
a. If Offeror is in doubt as to the meaning of any item in this Invitation, a written request for clarification may be submitted to H-GAC up to fifteen (15) calendar days prior to the deadline for res ponse submission. H-GAC shall not be responsible for late delivery. Requests may be tr ansmitted by FAX or e-mail to the assigned Specification Specialist, and should clearly reference this Invitation number and the specific page and paragraph in question. If there are multiple questions, they should be stated separately and numbered. b. Any interpretation of Invitation documents, if made, will be by written Addendum duly issued. A copy of such Addendum will be mailed or delivered to each person officially on record as having been sent a copy of this Invitation. H-GAC will not be responsible for any other explanation or interpret ation of the Invitation documents made or given prior to the award of the contract. c. Any objections to the Invitation documents must be filed in wri ting with H-GAC on or before fifteen (15) calendar days prior to the deadline for submission of responses. d. P r o s p e c t i v e o f f e r o r s a r e a d v i s e d t h a t , a f t e r a d r a f t s p e c i f i c a tion has been issued, the Pre-Bid/Proposal Conference is the primary forum through which comments and suggestions may be offered for consideration by H-GAC prior to issuance of the final invitation and specifications.

Revised: 04/16/18 Page 14 of 20

e. All best efforts have been made to insure that the product/serv ice descriptions and associated specification information in Sections B & C are correct, and adequate time ha s been given to prospective Offerors to point out mistakes. However, if an error remains and is caught by Offeror before the scheduled bid/proposal opening, Offeror shall make note of the required correction in the Respo nse, and shall also notify H-GAC prior to the opening of responses.

29. INCONSISTENT INFORMATION
H-GAC review of responses supplied on H-GAC FORMS is a significant part of the evaluation process. Offeror shall state clearly all information required on the FORMS. Offeror's information supplied on the FORMS shall take precedence in the event any standard “boilerplate” type language included in Offeror's response is inconsistent with the information supplied by Offeror o n t h e H-GAC FORMS. In all cases, information on H-GAC's printed FORMS supplied as part of Offeror's response shall take precedence over information supplied on electronic media.

30. REJECTION OF RESPONSES
a. H-GAC may reject a response if:
 Offeror misstates or conceals any material fact in the Response, or if,  Offeror does not strictly conform to law or the requirements of this Invitation. b. H-GAC may reject any and all responses, and may reject any part of a response. c. H-GAC, at it's sole discretion, may also waive any formalities or irregularities in any respon se, or ask for corrected information except for pricing.
d. The following occurrences require disqualification of the bid/proposals:
 Unsigned or unauthorized signatures on bids/proposals;  Bids received after the date and time for opening
 Bids where prices are conditional on award of another bid or are subject to unlimited escalation e. H-GAC may refuse to award a contract t o or enter into a transaction w ith an apparent low bidder if that bidder is indebted to H-GAC.

31. WITHDRAWAL OR MODIFICATION OF RESPONSES
Once received by H-GAC, responses may be modified or withdrawn prior to the submissio n deadline only if the request to do so is in writing submitted by Offeror's authorized representative. Responses and requests for modification received after the submission deadline will not be accepted. Requests for response withdrawal received after the submission deadline will be accepted if the request to do so is in writing submitted by Offeror's authorized representative.

32. RESPONSE EVALUATION
For Bid Responses:
a. Section B will state whether the contract will be awarded to th e lowest responsible bidder or to the bidder who provides goods or services at the best value for H-GAC and its participants. b. If the contract will be awarded based on best value, Section B will state any relevant criteria which H-GAC will consider.
c. For each offered Product Item, H-GAC may use the offered price, prices for Required Options, and th e prices of selected common Published Options to determine the lowest responsible offer. d. Failure of Offeror to submit pricing for frequently purchased options and any H-GAC required options may cause response to be considered non-compliant at H-GAC’s sole discretion.

For Proposal Responses:
e. H-GAC will evaluate proposals as detailed in Section B. f. By submission of a Response Offe ror indicates acceptance of the evaluation technique, and recognizes and accepts that H-GAC may at it's sole discretion make subjective judgments during the evaluation process.

Revised: 04/16/18 Page 15 of 20

33. ORDER OF PRECEDENCE PRIOR TO CONTRACT AWARD
In the event of conflict between this document and any referenc es or documents cited herein, this document shall take precedence prior to contract award.

34. AWARD OF CONTRACT
a. H-GAC reserves the right to accept or reject any Product Item or opt ion offered. Additionally, all options included in Offeror's response and accepted by H-GAC are understood to be included in any contract. b. H-GAC shall award contract(s) for line items or groups of line items, at its sole discretion. c. With authority granted by the H-GAC Board of Directors, a written contract shall be presented to the successful Offeror(s) and shall be subject to acceptance by the successful Offeror(s) within forty-five (45) calendar days after presentation by H-GAC. If a contract is not executed within forty-five (45) calenda r days, H-GAC may rescind the contract offer and award a contract to the next Offeror in order of rank as determined by H-GAC. d. Delivery time and prompt payment discounts, including time allo wed for payment, may be considered in tie- breaking of offers which are judged by H-GAC to be equal in all other criteria. e. The contract shall include the following documents in the stated order of precedence:
1st The contract document signed by H-GAC and Offeror.
2nd This Invitation and all specifications referenced herein. 3rd Offeror's response to this Invitation.

35. PRO-FORMA CONTRACT
This Invitation includes a Pro-Forma (sample) Contract which su ccessful offerors will be expected to sign. The actual final contract will be the same or nearly the same as th e Pro-Forma. NOTE: Successful Offerors MAY NOT process any purchase orders until the contract documents have been executed and returned to H-GAC.

36. CONTRACT TERM
The contract shall be in effect t hroughout the period stated elsewhere in the contract documents, and thereafter until such time as any outstanding ord ers against the contract have b een fulfilled. The contract may be extended if deemed by H-GAC to be in the best interests of the Program, and subject to mutual agreement of the parties.

37. PERFORMANCE & PAYMENT BOND
H-GAC's contractual requirements DO NOT include a Performance & Paym ent Bond (PPB), and offered pricing should reflect this cost saving. However, Contractor must be prepared to offer a PPB to cover any specific order if so requested by End User. Contractor shall quote a price to End User for provision of any requested PPB, and agrees to furnish the PPB within ten business (10) days of receipt of End User's purchase order.

38. CHANGE ORDERS
End User s shall have the right to make additions by addenda for the pur pose of clarification or inclusion of additional specifications, qualifications, conditions, etc. An y such addenda shall be made in writing and agreed upon by Contractor and the End User agency prior to issuance of any Change Order. A copy of any s uch Change Order shall be furnished by Contractor to H-GAC.

39. DUPLICATION OF TERMS OR STATEMENTS
Where statements or terms are du plicated or are extremely simil ar, H-GAC and the End User reserve the right to use the statement or term most favorable to H-GAC and/or the End User.

40. PUBLICITY
H-GAC encourages contractors to "market" the Program, and can provide some information and artwork to be used in published promotional materials. However, any publicity or published material released by Contractor referencing the contract, whether in the form of a press releas e, brochure, photographic coverage, or verbal announcement, shall be issued only with prior review and approval by H-GAC.

Revised: 04/16/18 Page 16 of 20

41. TAXES
HGAC and End User participants are either units of government or qualified non-p rofit agencies, and are generally exempt from Federal and State sales, excise or use taxes. Offeror shall not include any such taxes in the Response.

Further, it shall be the responsibility of Contractor to determine the applicability of any taxes to a particular or der and act accordingly. Exemption certificates will be provided upon request.

42. DRUG FREE WORKPLACE
Contractor shall provide notice to its employees and sub-contractors, as required under the D rug-Free Workplace Act of 1988. A copy of Contractor's Drug-Free Workplace policy shall, on request, be furnished to any End User.

43. PRODUCT NOTICES & MAILINGS
H-GAC is NOT the owner of Products sold pursuant to this Invitation, but acts only in the capacity of purchasing agent. In that regard, Contractor accepts sole responsibility for i nsuring that notices and mailings, such as Safety Alerts, Safety Recall Notices and Customer Surveys, are sent directly to the End User of record.

44. HANDLING OF ORDERS & PAYMENTS
In general, orders and payments will be handled as described be low. More s pecific instructions a nd inf orm ation regarding handling of purchase orders and the Order Processing Charge may be provided after contract award.

Established procedures may be changed at any time by H-GAC as may be dictated by efficient business practice.

The particulars of any sale, e.g. specific products, pricing, d elivery, warranty, etc., will be in strict accordance with the terms and conditions of this Invitation and the specific contract awarded to Contractor. Beyond that:
a. For any particular procurement to be made under the provisions of an H-GAC contract, End User a n d Contractor will discuss requirements and agree as to what will be provided. b. Contractor will prepare a Contract Pricing Worksheet and provide it to End User. The Worksheet will list everything being purchased including the base bid item(s), all published and unpublished options and the delivery date. All pricing shall be per the current contract. c. End User will send a purchase document to Contractor, which Contractor will send H-GAC together with the Contract Pricing Worksheet. NOTE: Contractor agrees not to offer, agree to or accept from End User any terms or conditions that conflict with or contravene those in Contractor’s H-GAC contract, except for pricing discounts.
d. H-GAC will prepare an "Order Confirmation" and send it to End User a n d t o Contractor. T h e O r d e r Confirmation verifies that Contractor has a valid H-GAC contract and that the order is in compliance with the requirements of the H-GAC Cooperative Purchasing Program. Contractor will not ship any goods before receipt of both End User's purchase document and H-GAC's Order Confirmation. e. On notification that Contractor has received an order, H-GAC will invoice Contractor f o r t h e a p p l i c a b l e Order Processing Charge. NOTE: The Order Processing Charge is charged to Contractor, EXCEPT in the case of motor vehicles. For all sales of motor vehicles the Order Processing Charge is levied on the End User, collected by Contractor, and remitted to H-GAC by Contractor. f. Contractor will deliver products/services ordered, and will invoice End User for products/services accepted by End User. (See other Sub-Section herein dealing with Product Delivery. ) Contractor will not invoice before shipment has been made.
g. End User will pay Contractor for those products and/or services ordered which have been rec eived and accepted. Under no circumstances shall any check be made payab le to a representative or agent. Should a representative or agent submit an invoice to End User for any cost related to a purchase order issued to Contractor for products/services covered by an H-GAC contract, such invoice shall be forwarded to Contractor and Contractor will take action to correct the error. h. Upon delivery of any product/service by Contractor and acceptance by End User, Contractor shall remit to H-GAC the full amount of the applicable Order Processing Charge in a ccordance with the payment terms established in the H-GAC contract. Note, the Order Processing Charge is due whether or not Contractor has ever received an invoice from H-GAC. Sales executed based on the particulars of Contractor's H-GAC contract, without payment of the Order Processing Charge, may constitute fraud.

Revised: 04/16/18 Page 17 of 20

45. PRICE CHANGES
a. Any permanent increase or decrease in offered pricing for a base contract item or published option is considered to be a price change. Temporary increases in pricing by whatev er name (e.g. ‘surcharge’, ‘adjustment’, ‘equalization charge’, ‘compliance charge’, ‘recovery charge’, etc.), are also considered to be price changes. b. Except in the case of contracted published catalogs and price s heets, prices for Base Bid Items and Published Options a re e xpected t o be held firm for a m inim um of 90 days from the date an awarded Offeror signs the H-GAC contract. Thereafter, cha nges will be considered if acco mpanied by justifying documentation satisfactory to H-GAC. For pub lished catalogs and price sheets which are on an H-GAC contract, requests to amend the contract to reflect any new published catalog or pric e sheet may be submitted whenever the manufacturer publishes the new document. Any such request must include the new catalog or price sheet. c. If Contractor routinely offers discounted contract pricing, H-GAC may request Contractor to accept amended contract pricing equivalent to the routinely discounted pricing. d. No price change will be allowed unless it has been reviewed and approved by H-GAC in writing. Contractor must have received H-GAC's written approval of any change prior to charging the new price or using it in any quotation prepared for an End User.
e. Price change requests must be submitted to H-GAC in writing and must be received by H-GAC at least thirty (30) calendar days prior to the requested effective date of the change, and must state the time period for which the requested pricing will remain firm.
f. Price change requests shall include H-GAC Forms D and E, or whatever documentation was used to submit pricing in the original Response hereto, showing all affected i tems with current contract price, requested price, and percentage change shown clearly for each. This documentati on should be submitted in MSExcel format to facilitate analysis and updating of the website.
g. Price change requests MUST be supported with substantive documentation (e.g. manufacturer's price increase notices, copies of invoices from suppliers, etc.) showing that Contractor's actual costs have increased. The Producer Price Index (PPI) may be used as partial justification , subject to approval by H-GAC, but no price increase based solely on an increase in the PPI will be allowed. h. All Products shall, at time of sale, be equipped as may be required under any then current applicable local, state, and federal government requirements. If, during the course of any contract, changes are made to such government requirements which cause a manufacturer's costs of p roduction to increase, Contractor m a y increase Product pricing to the extent of Contractor’s actual cost increase. The increase must be substantiated with support documentation acceptable to H-GAC prior to taking effect. Modifications to a Product required to comply with such requirements which become effective after the date of any sale shall be the responsibility of the End-User.
i. In cases involving contract extensions exceeding sixty-one (61) days beyond the stated expiration date of the contract, Contractor may request a price change based on the same conditions as sta ted above. However the thirty (30) day prior notice is waived and H-GAC will consider the request immediately on receipt. j. H-GAC reserves the right to accep t or reject any price change r equest. Acceptance, if granted, will be in writing and the approved changes will become part of the contract.

46. CONTRACT ITEM CHANGES
a. If a manufacturer discontinues a contracted item, that item wil l automatically be considered to be deleted from the contract with no penalty to Contractor. However, H-GAC may at it's sole discretion elect to make a contract award to the next low offeror for the item, or take any other action deemed by H-GAC to be in the best interests of End Users, at its sole discretion.
b. If a manufacturer makes any chang e in a contracted item which d oes not affect the con tract price, Contractor shall advise H-GAC of the details. If the 'new' item is equal to or better than the originally contracted item, the 'new' item shall be approved as a replacement. Otherwise H-GAC may allow or reject the change, or take any other action deemed by H-GAC to be in the best interests of End Users, at its sole discretion. If the change is rejected there will be no penalty to Contractor.
c. If a manufacturer makes any kind of change in a contracted item which affects the cont ract price, Contractor shall advise H-GAC of the details. H-GAC may allow or reject the change at its sole discretion. If the change is rejected there will be no penalty to Contractor. However, H-GAC may elect to make a contract award to the next low offeror for the item, or take any other action deemed by H-GAC to be in the best interests of End Users, at its sole discretion.

Revised: 04/16/18 Page 18 of 20

d. In the case of specifically identified catalogs or price sheets which have been contracted as base bid items or as published options, routine published changes to products and pr icing shall be automatically incorporated into the contract. However, Contractor must still provide thirty (30) calendar days written notice an d an explanation of the changes to products and pricing. H-GAC will respond with written approval.

47. FORCE MAJEURE
If either party shall be wholly or partially prevented from the performance of any contractual obligation or duty by reason of or through strikes, stoppage of labor, riot, fire, fl ood, acts of war, insurrection, accident., order of any court, act of God, or specific cause reasonably beyond the part y's control and not attributable to its neglect or nonfeasance, in such event, the time for the performance of suc h obligation or duty shall be suspended until such disability to perform is removed. Determination of Force Majeure shall rest solely with H-GAC..

48. PERFORMANCE UNDER CONTRACT
H-GAC is committed to insuring that Contractor provides effective and efficien t service to all Participants i n the Cooperative Purchasing Program, an d expects that certain Perfor mance Conditions must be met. Failure to meet these conditions may result in contract termination. In that regard, Contractor shall:
a. Appoint a dedicated representative to be the contact person and focal point for all matters relating to End User quotations and orders. The representative shall have: A toll free phone number with voice mail; A fax number; A working e-mail address; and A postal address. b. Insure that the representative timely monitors all communication modes listed above, and promptly responds to communications from End Users and H-GAC in any of these modes. Phone calls will be promptly returned, in any event not later than the next business day. Acceptable failure will be due only to Force Majeure. c. Maintain sufficient qualified staff to promptly process all com munications from H-GAC or End Users, and to efficiently, effectively and accurately service all requirements of the contract. d. As may be requested by H-GAC, replace any staff members who are not providing the service a nd expertise deemed necessary by H-GAC for acceptable support of End Users. e. Properly prepare and provide to End User a Contract Pricing Worksheet, or a quotation in other format a s approved by H-GAC, for each and every order that is to be executed. f. Furnish, on request of H-GAC, reasonable data, forms and graphic material to be used in bro chures or other print media, or on H-GAC's website.
g. Allow access to H-GAC authorized personnel for inspection of operating facilities, a nd auditing of purchase orders during the contract period, and for a period extending thru the completion of any outstanding orders. Site inspection may be arranged not less than ten (10) calendar days prior, shall include the names of all participants, and shall be at no expense to Contractor.
h. Reporting Requirements:
 Contractor agrees to submit written quarterly reports to H-GAC detailing all transactions during the previous three month period. Such reports shall include, but are not limited to the following:
 End User name
 Product/Service purchased, including Product Code if applicable  End User Purchase Order Number
 Purchase Order Date
 Product/Service dollar amount
 HGACBuy Order Processing Charge amount
 Reports must be provided to H-GAC in MSExcel or other acceptable electronic format, and are due by the 30th day of the month following the applicable quarter being reported. i. Should Contractor default in providing Products or Services as required by this Invitation and the contract, recourse may be exercised thru cancellation of the contract and other legal remedies as may be appropriate.

49. CONTRACTOR ORIENTATION/TRAINING
H-GAC believes that Contractor's familiarity with the operational policies and requirements of the Cooperative Purchasing Program is a key factor in achieving End User satisfaction. In that regard, the Contact Person listed on Form A , or an alternate, shall be required to participate in an H-GAC vendor orientation/training as soon as

Revised: 04/16/18 Page 19 of 20

possible after contract award. In addition, any other of Contr actor's staff who will be involved in any way with the HGACBuy Program should participate in orientation. The orienta tion may be presented as a teleconference or webinar, or may be held in H-GAC's offices as may be determined by H-GAC and Contractor to be the most efficient and effective form of delivery.

50. LEGAL & CONTRACTUAL REMEDIES

RESOLUTION OF PROTESTED SOLICITATIONS AND AWARDS
Procedure
Any actual or prospective Offeror or Contractor who is aggrieved in connection with a purchase transaction may file a grievance. The griev ance may be filed at any phase of the procurement. In order for an above mentioned party to enter the grievance process, a written compl aint must be sent to the Chief Operations Officer (COO) of H-GAC by certified mail which identifies the following:

1. Name, mailing address and business phone number of the complainant.

2. Appropriate identification of the procurement being questioned.

3. A precise statement of reasons for the protest.

4. Supporting exhibits evidence or documents to substantiate any claims.

The grievance must be based on an alleged violation of H-GAC’s Procurement Procedures, a violation of State or Federal law (if applicable), o r a violation of applicable gr ant or contract agreements to which H-GAC is a party. Failure to receive a procurement award from H-GAC in and of itself does not constitute valid grievance. Upon receipt of grievance, the Chief Operations Officer will initiate the informal resolution process.

Expedited Resolution
The Procurement Officer or Depart mental Director responsible fo r the solicitation shall contact the complainant and all interested parties and attempt to resolve the allegations informally within ten (10) working days from date of complaint. If the allegations are successful ly resolved by mutual agreement, documentation will be forwarded to the Chief Operations Officer of the resolu tion with specifics on each point addressed in the original complaint.

If the Procurement Officer or Dep artmental Director is not succ essful in resolving the allegations, the complaint along with the comments will be forwarded to the Chie f Operations Officer immediately. The Chief Operations Officer will review all documentation. All interested parties will be given written notice of the date, time, and place of the hearing and an opportunity to present evidence. A written decision will be issued within five (5) working days after the hearing along with notice of appeal rights.

Appeals
The complainant may appeal the Chief Operations Officer’s decis ion by submitting a written appeal, within five (5) working days, to the Executive Director of H-GAC. The Executive Director, upon receipt of a written notice of appeal, shall contact the complainant and schedule a hearing within ten (10) working days. The Executive Director of H-GAC has the option of appointing a Hearing Officer to preside over the hearing. If appointed, the Hearing Officer shall conduct a hearing and forward a summary and recommended resolution to the Executive Director.

The decision reached by the Executive Director or his designee shall be final and conclusive. This decision will be forwarded to the complainant in writing within thirty (30) working days.

The Contractor may, if it elects to do so, app eal the final and conclusive decision of the Executive Director to a Court of competent jurisdiction.

RESOLUTION OF CONTRACT DISPUTES
Upon breach or default, H-GAC shall give the Contractor written notice of default. If t he default is not remedied, within a reasonable specified time from date of notification, t o the satisfaction and approval of H-GAC, default will be declared.

Upon breach of contract or default, H-GAC may exercise any and all of its rights afforded by law, includ ing but not limited to those referenced in the General Contract Provisions.

SOLICITATIONS OR AWARDS IN VIOLATION OF THE LAW
Contracts awarded in violation of the competitive process or ot herwise in violation of the law are voidable by H-GAC.

Revised: 04/16/18 Page 20 of 20

51. NATIONWIDE SALES OPPORTUNITIES
HGACBuy provides purchasing services to local governments qualifying n on-profits throughout the nation, and desires to make established contracts available to them whereve r and whenever practicable. Therefore, once a contract is awarded, Contractor is expected to expand the scope of its marketing effort to inc lude sales to End Users in all areas of the United States, and/or to assign any H-GAC contract to another contractor(s) as deemed appropriate by H-GAC in the interest of its End Users.
 Contractor may sell through HGACBuy anywhere subject to complian ce with applicable laws and regulations. If the market structure in which Contractor operates requires a contract assignment for any particular sale, H-GAC will expect Contractor to assign the contract to a Manufacturer or to another Dealer(s). Such assignment must be approved by H-GAC.
 Contractor’s differential costs (e.g. transportation & delivery charges) and allowances (e.g. manufacturer’s sales incentives) related to any sale may be charged to buyer.

End of Section A General Terms And Conditions
FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 1 of 11

SECTION B - PRODUCT SPECIFIC REQUIREMENTS
For

FIRE SERVICE APPARATUS (ALL TYPES)

TABLE OF CONTENTS
Subsection Page

1. INTRODUCTION ............................................................................................................................................... 1

2. STRUCTURE OF RESPONSE AND REQUIRED INFORMATION…………………………………....... 2

3. GENERAL ........................................................................................................................................................... 4

4. DETAILED PRODUCT SPECIFICATIONS ................................................................................................... 4

5. LEGAL REQUIREMENTS…………………………………………………………………………………….4 I. WILDLAND FIRE APPARATUS (BRUSH FIRE) ..................................................................................... 6 II. SPECIAL SERVICE FIRE APPARATUS (RESCUE) ................................................................................ 7 III. AERIAL FIRE APPARATUS ........................................................................................................................ 8 IV. PUMPER FIRE APPARATUS ....................................................................................................................... 9 V. AIRCRAFT RESCUE & FIRE FIGHTING VEHICLES ……………………………………………….10

6. EVALUATION AND BID AWARDS...……………………………………………………………………....10

1. INTRODUCTION
It is the intent of this bid solicitation to acquire pricing th at will be used to establish purchase order contracts for various types of fire apparatus. These specifications describe various categories and specific types of Fire Apparatus, including minimum design and construction characteri stics considered necessary to perform desired functions. Any products bid hereunder must meet or exceed all requirements listed or refer enced in this Invitation.

The basic Product categories covered by this Invitation are:

A. Aerial Fire Apparatus (Boom/Platform, Ladder, Ladder/Platform) B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus
D. Special Service Apparatus (Rescue, Re-Hab, Hazmat, Mobile Command Center, etc.) E. Pumper-Tanker / Elliptical-Tanker Fire Apparatus
F. Aircraft Rescue & Fire-Fighting Vehicles
Specific Product items have been pre-listed on Form D to be bid. If options (see below) other than the Base Product Items on Form D are being offered, they should be listed on Form E as upgrades, downgrades, or modifications to the base Product Item on Form D and should be priced using a differential amount based on the bid price for the base Product Item.

Note: All products listed on Form D shall be considered as base models/units. Bidders shall provide pricing on all options where applicable as they pertain but not limited to the following:
 Chassis/Cab Builder (manufacturer)
 Cab Designs (2/4 Door/Tilt Cab etc.)
 Cab/Body Sheet Metals (Galvanneal, Formed/Extruded Aluminum, Stainless Steel)  Rear Axle Configuration (Single/Tandem/Tandem Front Steering/Triple Rear)  Fire Pump Capacities & Mounting Locations (1250/1500/2500 GPM Pump/rear and mid-mounted) FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 2 of 11

 Body Configurations (Walk-In/Non-Walk-In Body)
 Aerial Categories (Construction/Turntable Positions/Aerial Device Functions) Note: Customer Quotations – If Requested by an End User , the contractor shall be prepared to provide itemized pricing of the base specification (product code) allowing End U ser verification of credits/deducts due as a result of upgrades/downgrades to features included in the base specification.

2. STRUCTURE OF RESPONSE AND REQUIRED INFORMATION
The following core areas must be addressed specifically in any response to this bid:

 Proposals (1-original and 1-copy) , marked accordingly and in hard-sided 3-ring binders, shall be organized in tabbed sections, each containing ALL required info rmation and/or FORMS as described below.

 In addition, complete responses shall also be provided in an el ectronic format such as; CD, thumb-drive, flash-drive, etc., such that the entire response can be uploade d to H-GAC’s data system and be made available to End Users as may be requested. A single electronic copy of the solicitation will suffice and should be put with/in the copy binder.

 Forms D & E must be provided in an Excel format. NOTE: Keep in mind, the 3-ringed binder marked ORIGINAL is locked away and the entire evaluation process is done from the COPY a s w e l l a s t h e electronic copy. Therefore, the 3-ringed binder marked copy mu st be an exact duplicate of the original including all the signatures and other markings.

Bidder shall provide the information described below, labeled and tabbed to correspond with the designated Segment (Tab) Headings (A thru G) being bid. The items in these Tabs (A-G) must be addressed completely.

** For example, Tab D will be tabbed and have three (3) items to be addressed (1, 2, 3) for this segment. It is this information that will be evaluated and determine the proposers final score.

Note: It is extremely important to set-up the binders as instr ucted. Responses not organized in the prescribed manner may be eliminated from consideration.

Bid Format

TAB - A. Proposer Identification / HUB Status / Checklist.

Forms A, B, C, G, H, W9, CIQ, 1295, HB89 & CCI . A 1295, W9, CIQ, HB89 & CCI form must be provided from each entity that has submitted a Form A for this submission.

Tab B: Licensing & Electronic Media
Copies of all applicable Texas MVD Licenses. Electronic Media containing the complete response including all required FORMS, stored in a pouch or an envelope such as not to fall out of the binder. (Required in “Copy” only, not “Original”)

FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 3 of 11

Tab C: Products & Pricing

Bidder shall provide:

1. Form D (Offered Items Pricing) and Form E (Published Options). Forms D & E must be in an excel format.
 Bidder must provide an electronic copy of the complete submissi on. Electronic copy to be put in the “Copy” binder.

2. Technical Specifications, Product Brochures, Tear Sheets, Cut S heets, Strippers, etc. which clearly show all the standard features and capabilities of each Product Code bid on Form D.

3. Product information covering basic/standard warranty on equipment/products being offered.

Tab D: References
Further to the requirements for references as detailed in Secti on A, General Terms & Conditions, Bidder must provide references from at least five (5) loca l government entities which have purchased offered Products within the past two years. Information provided shall include, as a minimum:

1. Entity name

2. Contact person’s name, address & phone number

3. Description and value of product(s) purchased

Bidder is encouraged to include any letters of endorsement whic h may be available from the supplied references. In any event, H-GAC reserves the right to consider historic information and other facts in its proposal evaluations, whether gained from this proposal, references, or any other source.

Tab E: Geographic Areas Served

1. HGACBuy is a nationwide program. Describe you Geographic Coverage so H-GAC may evaluate your ability to meet the needs of End Users throughout the United States.

2. Explain how you will market the HGACBuy program. Contractors are allowed to use the HGACBuy logo on brochures and other printed literature as well as websites and trade shows; subject to prior review and approval by H-GAC.

3. Detail your dealer network (nationwide) and describe how it will be used to promote this program and provide products/services to H-GAC members nationwide.

Tab F: Service Facilities & Personnel

1. Sales office locations.

2. Factory and Service Center Locations.

3. Technical and maintenance services provided after a sale, and on what basis

4. Warranties, policies and procedures for handling problems

5. Customer training provided, and on what basis?

Tab G: Customer Contract/Agreement Documents
Bidder shall provide copies of all documentation that a custome r would be required to sign in the event a purchase is made. H-GAC shall review documentation relative to consistency with indust ry/Bidders’ norms, and restrictiveness relative to the best interests of H-GAC members.

FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 4 of 11

3. GENERAL
 Third Party Specification(s) By Reference
This specification is based on the latest editions of NFPA 1901 Standard for Automotive Fire Apparatus, NFPA 1906 Standard for Wildland Fire Apparatus and NFPA 414 Standard for Aircraft Rescue and Fire-Fighting Vehicles.
 Form A’s
An originally signed Form A from the all entities who are party to this submission and who should be offered a contract if this submission is successful. These entities should include the Apparatus Manufacturer, Franchised Texas Dealer and those dealers outside Texas who have current or past sales through the program (Note: All other sales outside Texas should be coordinated through the manufacturer when possible). In those cases where sales must go through a dealer due to franchise agreements, Form A’s will be accepted from those dealers. For those only bidding conversions (i.e. brush trucks, light rescues), Form A's from in-state commercial chassis dealers for the underlying chassis make being quoted should be provided.  Product Liability Insurance.

The requirements for Product Liability Insurance in Section A are superceded as follows:

For Brush Fire Apparatus, Mini-Pumpers, Class A Pumpers, Heavy Duty Rescues, and HazMat & Mobile Command Centers, Bidder must have in place Product Liability In surance with a Single Occurrence limit of at least $1,000,000 per seating position. For Aerial Apparatus, t he requirement is $5,000,000 plus an additional $1,000,000 for each seating positio n. [e.g. An aerial ladder t ruck with six (6) seating position would require Product Liability Insurance with a Single Occurrence limit of $ 11,000,000.] For Slip-In Pump/Tank Units, the requirement is a Single Occurren ce limit of $1,000,000 total. The General Aggregate limit for all Apparatus categories must be at least two times the Single Occurrence limit.

Note: Product liability listed above shall be the responsibility of the manufacturer.  Fire Apparatus Options, Accessories & Loose Equipment Offered.

H-GAC bid specifications for fire apparatus include FORM E “Priced Options.” Equipment not offered in the bid response as Priced Options shall be classified as “Unpriced /unpublished” and may not be sold except as subject to the 25% restriction imposed by Texas statutes.

N o t e : A l l p r i c e d o p t i o n s ( F o r m E ) m a y b e o f f e r e d f o r s e p a r a t e purchase to End Users . Individual purchase orders for these options cannot exceed $50,000.00 (H-GACBuy Fee – 1.5%)  Product Code
Each base Product item covered by this Invitation has been pre- listed on Form D, and is identified by a unique H-GAC alphanumeric Product Code. Bidder shall decide which line ite ms to bid and shall fill in a bid price in the appropriate cell on Form D.
 Training - On the initial delivery of the f ire apparatus, the contractor s hall supply a qualified representative to demonstrate the apparatus and provide initial instruction to re presentatives of the purchaser regarding the operation, care, and maintenance of the apparatus and equipment supplied (NFPA 1901. 4.4.3).

Note: Contractor shall quote as an option on Form E any optional instruction/training regarding service/maintenance that may be available for the delivered apparatus.  Manuals – The contractor shall supply at the time of delivery, at least two (2) sets of complete operations and service documentation covering the completed apparatus as delivered and accepted (NFPA Sec. 4.19.2.1)  COMMITMENT
Offeror is required to make some basic commitments to insure the overall success of this program. By submission of a response, offeror commits to the following:

 Corporate/Sales Commitment – A commitment that HGACBuy has the support of senior management and that HGACBuy will be the primary government contracting vehicle when offeri ng services/products awarded from this solicitation to eligible end users nationwide . A further commitment to aggressively market the program, both independently as well in partnership with HGACBuy.

FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 5 of 11

 HUB Participation – It is H-GAC’s goal to have Historically Underutilized Business Enterprise (HU B) participation in providing services under a contract. IF Offeror(s) intends to employ subcontractors in providing services/products related to this solicitation, Offeror(s) shall make and demonstrate a good faith effort to include HUB par ticipation under a contract. Offeror(s) good faith effort shall include, but is not limited to the following affirmative steps (ref. 2CFR 200.321):

1) Placing qualified small and minority businesses and women’s business enterprises on solicitation list;

2) Assuring that small and minority businesses and women’s business enterprises are solicited whenever they are potential sources;

3) Dividing total requirements, when economically feasible, into s maller task or quantities to permit maximum participation by small and minority businesses, and women’s business enterprises;

4) Establishing delivery schedules, where the requirement permits, which encourage participation by small and minority businesses, and women’s business enterprises;

5) Using the services and assistan ce as appropriate, of such organ izations as the Small Business Administration and the Minority Business Development Agency of the Department of Commerce;

NOTE: The term HUB as used in this solicitation is understood to enco mpass all programs/business enterprises such as Small Disadv antaged Business (SDB), Disadva ntage Business Enterprise (DBE), Minority Owned Business Enterprise (MBE), Women Owned Business Enterprise (WBE) and Disabled Veteran Business Enterprise (DVBE).

 Past Sales – On Joint Bids, Contractors (exclu ding manufacturers) outside Te xas must have sales on the current contract in order to participate in the upcoming solicitation.

4. DETAILED PRODUCT SPECIFICATIONS
The specifications detailed belo w for the various categories of apparatus are to be considered the minimum requirements unless there is a c onflict with descriptive inform ation detailed on Form D . In that event, the requirements of Form D shall govern.

Note: Bidder shall supply a spec/quote sheet for each product c ode bid on Form D. These sheets should detail what features are included in the price quoted on Form D.

5. LEGAL REQUIREMENTS
a) In addition to NFPA 1901,1906 and 414 (latest editions), all ap paratus offered shall comply with all applicable federal (i.e. FMVSS, SAE, DOT, TREA, EPA, ASTM, AWS, ASNT, UL, & N F P A + e t c . ) a n d s t a t e { T e x a s Department of Transportation, Division of Motor Vehicles, Motor Vehicles Division Code [Latest version]} regulations and rules, and have all components incorporated int o and/or on the apparatus as required for a Texas State Safety Inspection (i.e. front and rear mud flaps, inspection certificate, etc). b) Bidders, shall have on file at H-GAC prior to, or included with the bid response, the correct license(s) as required by the State of Texas, Department of Transportation, Division o f Motor Vehicles, Motor Vehicle Commission Code [latest edition] which is applicable to the bidder’s operations. c) The prescribed licenses will include the manufacturer/bidder, a nd any and all dealers and their representatives as may be required by the Motor Vehicle Division.
d) The Houston-Galveston Area Council (H-GAC) Cooperative Purchasing contract requires that you maintain all licensing required by the Texas Motor Vehicle Commission Code as may be applicable to your business. If at any time during the contract period such licensing lapses for any reason, you will be in default of the contract unless the TMVD issues a stay or waiver. It is your sole responsibility as the Contractor to maintain current licensing during the entire contract period. Failure to do so may result in contract termination.

FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 6 of 11

H-GAC will continue to require that copies of all current TMVD licenses as may be applicable be submitted with bid responses. Contracts will not be awarded to any contractor who does not supply the required copies. After initial submission of the bid response, contractors will only need to furnish copies to H-GAC upon request.

Note: All units offered in this solicitation must be available to our Texas members through in-state licensed franchised motor vehicle dealers. Form A’s are required with t he submission from each d ealer (e.g. apparatus, chassis as required) in order to receive a contract. Form A’s will not be accepted after the bid has been submitted.

Note: It is the contractor’s responsibility to ensure all appar atus sales are in accordance with the motor vehicle laws of the state where the acquisition is made.

I. WILDLAND FIRE APPARATUS (BRUSH FIRE)
A. WILDLAND/BRUSH FIRE APPARATUS -
In addition to the latest edition of NFPA Standard 1906, Produc ts bid hereunder must also comply with all H-GAC specifications and requirements herein. The wildland fire appa ratus covered by this Invitation are defined by the Product Codes that have been pre-listed on FORM D.

1. Minimum Standard Features Required in Base Product Item Bid:
a) Wildland/Brush Fire Apparatus Bids:
• Aluminum or Steel Flat Bed body style shall have mesh bulk head • Utility body shall be of steel, aluminum or composite fiberglass laminate • Composite Utility body shall be constructed of composite fiberglass laminate with closed cell structural PVC foam core. Comprising a laminate of ½” thick.
• Poly Utility body shall be ½” thickness copolymer sheet material. • 150 gpm single stage, auxiliary engine-driven pump with pump panel (2 stage pumps to be quoted as optional on Form E). The pump operator's panel shall be located on the left side or rear of the apparatus. • 300 gal polypropylene water tank (250 gal. on slip-on unit). Tank shall be polypropylene with lifetime warranty.

Note: Other sizes shall be offered as Priced Options on FORM E. Provide sizes up through at least 400 gal. • 1 Transverse preconnect hose bed (minimum)
• 20 cu ft Compartmentation including, but not limited to, left and right sides and rear (12 cu ft for slip-on units) • Heater/Defroster and Air Conditioning in Cab area
• Base Cab/Chassis GVWR – 13,000 lbs.
• V8 Diesel Engine
• 5 speed manual transmission (automatic transmission to be quoted as optional on Form E) • Completed apparatus must be NFPA 1906 Compliant
(b) Self-contained, Slip-on Unit Bids:
• 100 gpm @ 100psi single stage, auxiliary engine-driven pump with pump panel • 250 gal polypropylene water tank
• Hose reel, 150 ft. of 1” hose
• Slip-on Unit to be mounted on pickup supplied by End User OR H-GAC Contractor

2. Apparatus Accessories & Loose Equipment. Bid specification documents include Priced Option f orm s f or bidder to list prices for specific optional engines, fire pumps , body changes, accessories, and loose equipment.

Equipment not offered in the base bid or as an option shall be classified as "Unpublished Options" and subject to 25% cap permitted under "Non-Published" provisions for competitive bids. [See Terms & Conditions] FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 7 of 11

3. Options to Base Bid for additional apparatus. A thorough listing of options is recommended. Examples of options to include on FORM E are:
(a) Options to Brush Fire Bids only:
• Alternate GVWR Chassis
• Gas engine (as well as other engine sizes)
• 4-wheel drive
(b) Options to Slide-In Unit Bids only:
• Different pump sizes (e.g. 150 gpm @ 100 psi)
• Different tank sizes (+/- increments of 50 gallons.)
These options are in addition to any and all other options listed in this document or H-GAC Forms included.

II. SPECIAL SERVICE FIRE APPARATUS (RESCUE)
In addition to the latest edition of NFPA Standard 1901, Produc ts bid hereunder must also comply with all H-GAC specifications and requirements herein. The Products covered b y this Invitation are defined by the Product Codes listed on FORM D.

1. Standard Features Required in Base Bid for a special service fire apparatus. (a) Custom Cabs:
• Minimum four (4) SCBA seats in Tilt & Split Tilt cabs • Minimum three (3) SCBA seats in Stationary cabs
Note: Additional SCBA seats are to be priced as options on Form E) • Minimum 380 bhp diesel engine (optional engines to be priced on Form E) • Allison EVS-3000 Automatic Transmission (optional transmissions to be priced on Form E) • Front axle rating (min.) – 14,600 lbs. (stationary cabs), 16,000 lbs. (tilt cabs), 18,000 lbs. (split-tilt cabs) • Single Rear axle rating (min.) – 24,000 lbs.
• Full Anti-Lock Braking System
• Power Steering
• ABS Braking System
• Heater/Defroster/Vent/Air Conditioning
• Constructed on standard straight frame rail or drop-pinch chassis. • Fuel Tank – 50 gallon (minimum).
(b) Commercial Cabs:
• 2 Door Models (4 Door Models may be listed as options) • 3 to 4 SCBA seats (depending on seating capacity) 4 Door Models only • 300 to 330 bhp diesel engine (optional engines to be priced on Form E) • Allison EVS-3000 Automatic Transmission (optional transmissions to be priced on Form E) • Front axle rating (min.) – 12,000 lbs. (2-Door Cab)
• Single Rear axle rating (min.) – 21,000 lbs. (2-Door Cab) • Heater/Defroster/Vent/Air Conditioning
• Constructed on standard straight frame rail chassis.
• Fuel Tank – 40 gallon (minimum).

(c) Commercial Cabs (Light /Medium)
• 2 Door Models (4 Door Models may be listed as options) • 300 bhp diesel engine (optional engines to be priced on Form E) • Automatic Transmission (optional transmissions to be priced on Form E) • Front axle rating (min.) – 7,000 lbs. (2-Door Cab)
FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 8 of 11

• Single Rear axle rating (min.) – 12,000 lbs. (2-Door Cab) • Heater/Defroster/Vent/Air Conditioning
• Constructed on standard straight frame rail chassis.
• Fuel Tank – 40 gallon (minimum).
• ABS Braking System.

2. Options to Base Bid for apparatus . Contractors are encouraged to provide a thorough listing of options on Form E. Below are just a few examples of options to include on FORM E:

Options to Walk-In Bids:
(a) Haz-Mat Configuration
(b) 2 Person Command Center Configuration
(c) Walk-Through option

3. Special Service Fire Apparatus
Equipment Storage
(a) Non Walk-in - 640 ft3
(b) Walk-in bids - 320 ft3

4. To be bid as options on Form E.
(a) Optical Warning Devices
(b) Generators
(c) Breathing Air Systems
(d) Winches
(e) Additional Ground Ladders
Note: All optional apparatus models offered in any bid response sha ll be in compliance with NFPA 1901 (latest edition) for the specific apparatus offered.

III. AERIAL FIRE APPARATUS
In addition to the latest edition of NFPA Standard 1901, Produc ts bid hereunder must also comply with all H-GAC specifications and requirements herein. The Aerials (Booms/Pla tforms, Ladders, Ladder/Platforms) covered by this Invitation are defined by Product Codes that have been pre-listed on FORM D.

1. Standard Features. The following features must be included in all items bid pursuant to this Invitation:
 Seating for a minimum of five (5) firefighters.
 A Minimum of three (3) SCBA seats in stationary cabs, four (4) SCBA seats in all others.  For 75-99 ft., 500 lb. capacity apparatus (For Steel & Aluminum), a minimum 400 bhp diesel engine.  For all other Products, minimum 450 bhp diesel engine (w/EVS4000 Transmission)  All engines must meet current EPA standards.
 Allison EVS-3000 Automatic Transmission
 Engine exhaust auxiliary brake
 Full Anti-Lock Braking System
 Power Steering
 Air Brakes with min. 16 cfm compressor
FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 9 of 11

 1500 gpm single stage fire pump
 Polypropylene/fiberglass water tank:
 For 75-99 ft. Aerials, Single Axle, with a rated capacity of 500/750 lbs. (steel or aluminum construction), a 300 gallon minimum polypropylene or fiberglass water tank.
 For 75-99 ft. Aerials, Tandem Axle, with a rated capacity of 500/750 lbs. (steel or aluminum construction), a 500 gallon minimum polypropylene or fiberglass water tank.  For all 100’+ apparatus with platform, a 150 gallon minimum polypropylene or fiberglass water tank.  Two (2) Transverse preconnect hose beds.
 Ground ladders mounted in totally enclosed compartment(s) with doors, and providing access from the rear of the apparatus.
 Left side pump operator’s control panel.
 Heater/Defroster in Cab area.
 Air Conditioning in Cab area.
 For 45-65 ft. Mini-Aerials, Tandem Axle (19,000 lb. GVW), 1250 gpm single stage fire pump, (steel or aluminum construction), 300 gallon minimum polypropylene or fiberglass water tank, aluminum body.

2. Requirements by Apparatus Type.
(a) Aerials Fire Apparatus with 1,500 gpm single-stage fire pumps shall be compliant with the following NFPA 1901 chapters regarding apparatus requirements:

Chapter 5: Pumper Fire Apparatus
Chapter 8: Aerial Fire Apparatus
 All optional apparatus models offered in any bid response shall be in compliance with NFPA 1901, latest edition for the specific apparatus offered.

Note: Optional deletion of fire pump shall be offered as a priced option on FORM E.

IV. PUMPER FIRE APPARATUS
In addition to the latest edition of NFPA Standard 1901, Produc ts bid hereunder must also comply with all H-GAC specifications and requirements herein. The Pumper Fire Appara tus covered by this Invitation are defined by the Product Codes that have been pre-listed on Form D.

1. Standard Features Required in Base Bid Response.
• Commercial Cabs: 2 or 4 door cab with doors on left and right sides of apparatus • Custom Cabs: 4 door cab with doors on left and right sides of apparatus • Minimum three (3) SCBA seats in stationary cabs, four (4) SCBA seats in all others; there is no requirement for SCBA seating in 2-doo r Commercial Cabs
• Minimum 300 bhp diesel engine, 2-Door Commercial Cabs. • Minimum 320 bhp diesel engine, 4-Door Commercial Cabs. • Minimum 325 bhp diesel engine, Custom Cabs w/1250 gpm pump • Minimum 380 bhp diesel engine, Custom Cabs w/1500 to 2500 gpm pump Note: All engines offered shall meet current EPA standards. • Allison EVS-3000 Automatic Transmission for apparatus w 1250 gpm pump • Allison EVS-3000 Automatic Transmission for apparatus w/1500 to 2500 gpm pump • Engine exhaust auxiliary brake shall be provided in all apparatus • Full Anti-Lock Braking System
• Power Steering
• Air Brakes
• Minimum 750 gallon polypropylene or fiberglass water tank for pumper bodies, 300 gallon (mini-pumper) • Minimum 1800 gallon polypropylene, fiberglass or stainless steel water tank for pumper/tanker bodies on single rear axle
• 1250 gpm single stage fire pump, Commercial Cabs.
• 1250, 1500 to 2500 gpm single stage fire pump, Custom Cabs • Fuel Tank (minimum) – 40 gallon (commercial chassis), 50 gallon (custom chassis) FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 10 of 11

• Commercial Cabs (Light/Medium)
• 2 Door Models (4 Door Models may be listed as options) • 300 bhp diesel engine (optional engines to be priced on Form E) • Automatic Transmission (optional transmissions to be priced on Form E) • Front axle rating (min.) – 7,000 lbs. (2-Door Cab)
• Single Rear axle rating (min.) – 12,000 lbs. (2-Door Cab) • Heater/Defroster/Vent/Air Conditioning
• Constructed on standard straight frame rail chassis.
• Fuel Tank – 40 gallon (minimum).
• ABS Braking System.

2. Tanker Apparatus Pumps
Pumps, portable and PTO will be allowed on tankers. Minimum pump capability will be 250 gmp@150 psi, per NFPA 1901, 2009 Mobile Water Supply Apparatus, Chapter 14.  250, 350, 450, 500, 750 or 1000 gpm single state PTO or portable fire pump.

Note: Bidder shall list optional pumps as priced options on Form E.

3. Water Tanks
(a)Tank Construction.

Water tank capacity (pumpers) shall be a minimum rated 750 gal (2850 L) as provided in the base bid response.

Mini-Pumpers 300 gallon. Other sizes shall be offered as Priced Options on FORM E.

4. Mobile Water Supply Apparatus Water.

Water Transfer ( M o b i l e W a t e r S u p p l y ) . T h e b idder shall provide pricing for t anker configurations of 1,800 gallons to 4,000 gallons including chassis requirement changes to accommodate the extra weight.

V. AIRCRAFT RESCUE & FIRE FIGHTING VEHICLES
Products bid hereunder must comply with the latest Edition of NFPA Standard 414 (Standard for Aircraft Rescue and Fire-Fighting Vehicles). The Aircraft Rescue & Fire-Fighting Vehicles covered by this Invitation are defined by the Product Codes that have been pre-listed on Form D.

6. EVALUATION AND BID AWARDS

Bids will be evaluated by H-GAC Staff in compliance with stated requirements. Contracts will be awarded to the “lowest responsive responsible Bidder(s) providing best value” for each base line item offered. A minimum threshold score of 75 points will be required before a contract may be offered. Bids will be evaluated in two (2) stages.

The first stage will be a general evaluation of the overall compliance with Se ction B requirements (Tabs A-G).

Bids deemed to be responsive and scoring a minimum of 70 points will then be passed to the second stage.

The second stage, Pricing. An analysis of Bidder’s submitted bid price will be conducted for each base line item submitted on Form D. Bidders with the lowest total price for each line item will receive a maximum score of 75 points.

PAST PERFORMANCE – An evaluation will be conducted of the Bidder’s previous contract performance as an HGACBuy contractor based on the performance measured listed below. Maximum score is 25 points.

FS12-19 Fire Service Apparatus (All Types)

June 27, 2019 ----------Final ---------- Pa ge 11 of 11

PERFORMANCE MEASURES
Timely response to request for information and/or request for quotes/pricing (Sec A, 48b) Accurate preparation of Contract Pricing Worksheet(s) (Sec A 48e) Timely delivery of product or services (as quoted at time of order placement) (Sec A, 25c) Quality of products/service (Sec A, 25d, 44f)
Timely and accurate submission of Contractor’s Activity Report (Sec A, 48h) Timely payment of order processing charge (Sec A, 44g, 44h)

NOTE: For Joint Bids, each Form A submitted in the Bidders response will be scored per the above criteria and an overall average will be taken of all Form A’s submitted to determine the Performance score for each submission.

Evaluation Criteria Scoring Table

Maximum Points
P R I C E 7 5
PERFORMANCE MEASURES 25

T O T A L 100

----- End of Section B -----

Specifications prepared by

Houston-Galveston Area Council
Cooperative Purchasing Program

For questions about this Invitation, please contact:

Jackie Palmer
Ph: 713-993-2466
Email: [email protected]

Invitation No.: FS12-19
Title:

This Section contains the following H-GAC FORMS .

FORM DESCRIPTION
Form A: Offeror Identification and Authorized Signatory Form B: Historically Underutilized Business Enterprises Form C: Response Checklist
Form D: Offered Items Pricing
Form E: Published Options
Form G: Special Statement of Warranty
Form H: Marketing Plan
Form W-9 Request for Taxpayer Identification Number and Certification
Form CIQ Conflict of Interest Questionnaire
Form 1295 Certificate of Interested Parties
HB 89
Prohibition on Contracts with Companies Boycotting
Israel
CCI Contractor Contact Information

SECTION C - H-GAC FORMS
(Rev 12/02/09)
For Use In Responding To Competitive Bid And Proposal Invitations These FORMS are hereby made available in electronic format. They should be copied to Offeror's computer for completion and/or printout as required. The FORMS may not be changed or altered in any way, except as may be specified on the FORM .

ALL completed FORMS must also be submitted electronically on electronic media ( DVD, CDRom, flash/thumb drive), excepting of course for signatures. Th e printed "Original" of the response will be considered as the official copy in case of any discrepancy be tween the electronic version and the printed Original.

Fire Service Apparatus (All Types)

Invitation No.: FS12-19
Invitation Title:

Offeror Company:

Offeror Status:

Response Type(1):

Contract Signatory(2): Title:

Mailing Address(3):

Street/PO Box City State & Zip
Physical Address:

Street City State & Zip
Phone: Fax:

Email Address:

Federal Tax ID No.: Web Page URL:
(1) If Joint Offering, all parties must submit a signed Form A. A contract will be offered to each. (2) Person who will sign final contract documents if an award is made. (3) Address to which final contract documents would be sent for signature.

Contact Person(4): Title:

Mailing Address:

Street/PO Box City State & Zip
Physical Address:

Street City State & Zip
Toll Free Phone: Fax:

Email Address:
(4) Person who End Users will contact for product information and to get pricing quotes.

The Signatory below, on behalf of Offeror:

Signature: Title:

Printed Name: Date:

FORM A - OFFEROR IDENTIFICATION & AUTHORIZED SIGNATORY
(DO NOT handwrite this Form. Information must be typed in.) Fire Service Apparatus (All Types)
(Legal name of business which will appear on contract, if awarded) - Acknowledges having thoroughly reviewed the Invitation; - Attests to having the authority to sign this response and commit Offeror to honor all requirements; - Makes, under penalty of perjury, all required Offeror Certifications as detailed in General Terms; - Certifies that all information provided in this Response is true and correct.

Member Contact Information
Dealer/Distributor Manufacturer Other
Multiple Offerors
Acting Jointly
Single Offeror Acting
Alone Or As Lead
Procurement No.: FS12-19
Title:

Offeror:

Title: Date:

FORM B - HISTORICALLY UNDERUTILIZED BUSINESS ENTERPRISES Note 2: The terms "Certified" and "Listed" as used in conjunc tion with HUB programs relate to the process of HUB qualifica tion review. Jurisdictions usually require that companies clai ming HUB status be reviewed and confirmed as meeting certain minimum requirements to claim that status, and that the review and co nfirmation process be carried out by certain designated ent ities. They are then "Certified" or "Listed" by having their name included on an official listing published by the Certifying or Listing Authority.

HGACBuy is comitted to promoting full and equal business opp ortunities for HUB contractors, and to assisting Cooperati ve Purchasing Program (COOP) Members in meeting mandated HUB g oals. In that regard, Contractor shall make a good faith effo rt to use the services of Certified/Listed (See Note 2) HUBs whenever possible.

As part of a good faith effort, Contractor agrees to work with and assist HGACBuy Members in meeting HUB targets and goals, as may be required by any rules, processes or programs they migh t have in place. Such assistance may include such things as compliance with reporting requirements, provision of documentation, consideration of 'Certified/Listed' subcontractors, provision of documented evidence that an active participatory role for a HUB entity was considered in a procurement transaction, etc.

Most, if not all, of the Members of HGACBuy are subject to vari ous requirements relative to purchasing goods and services from Historically Underutilized Business Enterprises (HUBs)( See Note 1). These requirements are promulgated by federal a nd state governmental authorities, and include measureable criter ia such as 'percentage of total dollars spent directed to HUB s', 'number of HUB contractors used', 'HUB subcontractors employed by pri mary contractors', etc. These requirements are generally f ormalized in goal oriented programs.

Note 1: There are many designations other than "HUB" used acr oss the country within various jurisdictions. Examples inc lude terms such as Disadvantaged Business Enterprise (DBE), Min ority Owned Business Enterprise (MBE), Woman Owned Busines s Enterprise (WBE), Small Disadvantaged Business (SDB), Sma ll, Woman or Minority-owned Business (SWAM), etc. Regardle ss of the formal designation, the overall objective of the rela vant programs is basically the same, i.e. to insure that disa dvantaged and underutilized members of the business community receive a f air share of public spending. The term HUB as used herein shal l be understood to encompass all such programs/business enterprises, no matter what terminology is used by the Member.

Fire Service Apparatus (All Types)
Accepted and Agreed By:

On a separate sheet, list any subcontractors that would be em ployed in providing products or services related to this pro curement.

Include subcontractor name, designation (HUB, DBE, etc.) and certifying/listing authority.

HUB Status Of Offeror
Designation(s):

Certifying/Listing Authority(s):

Subcontracts
HUB DBE MBE WBE Other
Subcontractor List attached. No Subcontractors will be used.

Offeror is a HUB, as detailed below. Offeror is not a HUB.

Procurement No.: FS12-19
Title:

Offeror:

This Response Includes: Init.
1 2
3 4
5 6
7 8
9 10
11 n/a
A Bid/Proposal Bond, or Cashier’s Check in the amount of $3000. (A percentage bond is NOT acceptable.)
The required list of References .

Details of "Service Organization" , including locations, hours, personnel and parts/service availability. (Applies to hard goods only.)
Complete Warranty Documentation for all Products offered.

The manufacturer’s latest Specification Documents detailing standard features, op erating
characteristics, etc., for all products offered. Note: Bidder shall supply a spec/quote sheet for each product code bid on Form D. These sheets should detail what features are included in th e price quoted on Form D .

If the Non-Resident Reciprocal Bid Act applies, a copy of your state statute and a determination of t he status of Texas bidders/proposers in your home state. If not applicable, indicate "N/A" Forms A, B, C, D, E, G, H, (EXCEL FORMAT) , 1295 , W-9, CIQ, HB89, CCI. A 1295, W-9, CIQ, HB89 & CCI form shall be provided from each entity that has submitted a Form A for this submission.

An "Original" hard copy of the COMPLETE submission, including all required FORMS, plus one COMPLETE copy, each in a separate hard-sided 3-ring binder.

A copy of the COMPLETE submission, including all required FORMS , in electronic format (CD, DVD, flash drive). Forms D & E are to be provided in an excel format.

An originally signed Form A from the all entities who are party to this submission and who should be offered a contract if this submission is successful. These e ntities should include the Apparatus Manufacturer , Franchised Texas Dealer and those dealers outside Texas who have current or past sales through the program ( Note: All other sales outside Texas should be coordinated through the manufacturer when possible) . In those cases where sales must go through a dealer due to fra nchise agreements, Form A's will be accepted from those dealers. For those only bidding c onversions (i.e. brush trucks, light rescues), Form A's from in-state commercial chassis dealers for the underlyin g chassis make being quoted should be provided.

If offer includes motor vehicles to be sold in Texas, copies o f all current licenses as required by the Texas Motor Vehicle Commission.

FORM C - RESPONSE CHECKLIST
Fire Service Apparatus (All Types)
This FORM is provided to help insure that all required Response elemen ts have been completed and included, or certified as being available upon request. Responses that do not comply with all requirements may be considered non-compliant. Offeror's signatory must review each item below, and certify by initialing in the space to the right.

H-GAC 'FORM D' - PRODUCT ITEM BASE OFFERING PRICES Procurement No. FS12-19 Offeror Name:

Invitation No.: FS12-19 - Fire Service Apparatus (All Types) Product
Code
Model & Description
(Note: Bid only the base Item/Model on this Form . No changes/modifications to Form D descriptions will be accepted and will result in bid item being deemed non-compliant . Bid available options noted above on Form E )
Base Offered
Price
FS19AA01
Spartan, 4-Door Custom Full Tilt Aluminum Cab Single axle, 75' rear mount aerial, stainless steel body, 300 gallons, side stack hose bed, single stage 1500 gpm pump mid mounted
FS19AA02
Spartan, 4-Door Custom Full Tilt Aluminum Cab Tandem axle, 110' rear mount aerial with stainless steel body, 300 gallons of water, side stack hose bed, single stage 1500 gpm pump mid mounted
FS19AA03
Spartan, 4-Door Custom Full Tilt Aluminum Cab Tandem axle, rear mount 100' platform, stainless steel body, 300 gallons of water, hose bed, single stage 1500 gpm pump mid mounted
FS19AA04
Spartan, 4-Door Custom Full Tilt Aluminum Cab Tandem axle, mid-mount 100' platform, stainless steel body, 300 gallons of water, hose bed, single stage 1500 gpm pump mid mounted
FS19AB01
Ford F550 4x4, aluminum flatbed body, portable pump, 300 gallons of water FS19AB02
Ford F550, 4x4 2-door,stainless steel Body, Rescue Unit with Skid (1) A copy of each participating bidder/dealer's TxMVD dealer license identifying the make/brand of apparatus being bid.

IMPORTANT : Bidder MUST submit copies of the following with their bid:

Note: All products listed below are to be considered as base model/ units for purposes of this Invitation and any subsequent con tract. The Bidder shall determine which Product Codes to bid and shall fill in a bid price in the appropriate cell. Bidder may then bid upgrad es or downgrades to different product codes as options on Form E, with pricing equal to the differential amount between the b ase Product Item price and the upgrade or downgrade being offered. Bidders are to provide pricing for options and accessories as explained in Sections A and B, as w ell as specific apparatus variations as listed below:

1. Other available Cab/Chassis manufacturer choices for apparatus built on a commercial cab/chassis.

2. Different available cab designs (2/4 Door/Tilt Cab etc.)

3. Cab/Body sheet and structural metal choices (Galvanneal, Formed/Extruded Aluminum, Stainless Steel)

4. Available rear axle configurations (Single/Tandem/Tandem Front Steering/Triple Rear) (3) A copy of the bidders and/or manufacturers's Texas Motor Vehicle Converter license (where applicable).

Note: The above requirements must be met prior to any contracts being issued. (2) An originally signed Form A from the all entities who are party to this submission and who should be offered a contract if this submission is successful. These entities should include the Apparatus Manufacturer , Franchised Texas Dealer and those dealers outside Texas who have current or past sales through the program ( Note: All other sales outside Texas should be coordinated through the manufacturer when possible) .

In those cases where sales must go through a dealer due to fran chise agreements, Form A's will be accepted from those dealers. For those only bidding conversions (i.e. brush trucks, light rescues), Form A's from in-state commercial chassis dealers for the underlyin g chassis make being quoted should be provided.

A. Alexis
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) B. Wildland Fire Apparatus (Brush Fire)

5. Different fire pumps and mounting locations (1250/1500/2500 GPM Pump/Rear and Mid-Mounted)

6. Various body configurations (Walk-In/Non-Walk-In Body) for Rescue, Re-Hab, Hazmat, Mobile Command Centers

7. Aerial Categories (Construction/Turntable Positions/Aerial Device Functions)

Page 5 of 47 ends

FS19AB03
Ford F600 4x4, aluminum flatbed body, portable pump, 300 gallons of water FS19AB04
Ford F600, 4x4 2-door,stainless steel Body, Rescue Unit with Skid FS19AC01 Freightliner, 2-Door, Commercial Cab, Stainless Steel Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19AC02 International 2-Door, Commercial Cab, Stainless Steel Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19AC03 Spartan, 4-Door Custom Full Tilt Aluminum Cab, Stainless Steel Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19AC04
Ford F-550 4x4 Mini Pumper 1250 gpm, 300 tank
FS19AC05
Ford F-600 4x4 Mini Pumper 1250 gpm, 300 tank
FS19AD01
Ford F550, 4x4 2-door,stainless steel Body, Non Walk-in Rescue Unit FS19AD02
Ford F550, 4x4 2-door,stainless steel Body, Walk-in Rescue Unit FS19AD03
Ford F600, 4x4 2-door,stainless steel Body, Non Walk-in Rescue Unit FS19AD04
Ford F600, 4x4 2-door,stainless steel Body, Walk-in Rescue Unit FS19AD05
Ford F750, 2-door,stainless steel Body, Non Walk-in Rescue Unit FS19AD06
Ford F750 2-door,stainless steel Body, Walk-in Rescue Unit FS19AD07
Freightliner, 2-door, stainless steel body, Heavy Duty Non Walk-in Rescue Unit FS19AD08
Freightliner, 2-door, Stainless Steel Body, Heavy Duty Walk-In Rescue Unit FS19AD09
International, 2-door, stainless steel body Heavy Duty Non Walk-in Rescue Unit FS19AD10
International, 2-door, Stainless Steel Body, Heavy Duty Walk-In Rescue Unit FS19AD11 Spartan, 4-Door Custom Full Tilt Aluminum Cab, Stainless Steel Body, Heavy Duty Non Walk-in Rescue Vehicle
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
C. Pumper Fire Apparatus

Page 6 of 47 ends

FS19AD12 Spartan, 4-Door Custom Full Tilt Aluminum Cab, Stainless Steel Body, Heavy Duty Walk-in Rescue Vehicle
FS19AE01 Freightliner, 2-Door Commercial Cab, Pumper/Tanker, Stainless Steel Body, 2000 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted
FS19AE02 Freightliner, 2-Door, Commercial Cab, Pumper/Tanker, Stainless Steel Body, 3000 Gallon Tank, Tandem Axle, 1250 GPM Pump, Mid-Mounted
FS19AE03 International 2-Door Commercial Cab, Pumper/Tanker, Stainless Steel Body, 2000 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted
FS19AE04 International, 2-Door, Commercial Cab, Pumper/Tanker, Stainless Steel Body, 3000 Gallon Tank, Tandem Axle, 1250 GPM Pump, Mid-Mounted FS19AE05 Spartan, 4-Door Custom Full Tilt Aluminum Cab Pumper/Tanker, Stainless Steel Body, 2000 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted FS19AE06 Spartan, 4-Door Custom Full Tilt Aluminum Cab Pumper/Tanker, Stainless Steel Body, 3000 Gallon Tank, Tandem Axle, 1250 GPM Pump, Mid-Mounted FS19BB01 B-3-F450 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 325 gals water mounted on a Ford F450 Chassis 60” CA.

FS19BB02 B-3- D3500 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 325 gals water mounted on a Dodge 3500 Chassis 60”CA.

FS19BB03 B-4-F550 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 400 gal poly tank mounted on Fo rd F550 chassis 60”CA.

FS19BB04 B-4-D5500 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 400 gal poly tank mounted on a Dodge 5500 chassis.

FS19BB05
B-5-F550 Welded steel bed with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 500 gal poly tank mounted on Ford F550 chassis 84” CA.

FS19BB06
B-5-D5500 Welded steel bed with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 500 gal poly tank mounted on a Dodge 5500 chassis 84” CA.

FS19BB07
B-8-Ford Welded steel bed with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 800 gal poly tank mounted on a Fo rd F-750 Chassis.

FS19BB08
B-24-F550 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 400 gal poly tank, single upswing door per side mounted on a Ford F550 60” CA.

FS19BB09
B-24-D5500 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor, 400 gal poly tank single upswing door per side mounted on a Dodge 5500 60” CA.

FS19BB10 B-24-F550 Welded steel body with crosswalk and pump and roll capabilities HPX200 pump driven by a 23HP briggs motor 400 gal poly tank, single upswing door per side FS19BD01
B-27-F550 Rescue first response. Welded steel superstructure transverse crosswalk with pump and roll capabilities dual swing up doors per side HPX2 00 pump driven by a 23HP briggs motor 400 gal poly tank, mounted on a ford F550 chassis 84” CA.

E. Pumper/Tankers & Tankers
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
B. Blanchat Manufacturing
B. Wildland Fire Apparatus (Brush Fire)

Page 7 of 47 ends

FS19BD02
B-27-D5500 Rescue first response. Welded steel superstructure transverse crosswalk with pump and roll capabilities dual swing up doors per side HPX2 00 pump driven by a 23HP briggs motor 400 gal poly tank, mounted on a Dodge F550 chassis 84” CA.

FS19BD03
B-56-Ford Rescue first response. Welded steel superstructure transverse crosswalk with pump and roll capabilities dual swing up doors per side, dua l HPX200 pump driven by 23HP briggs motors, 800 gal poly tank, mounted on a Ford F-750 chassis.

FS19CB01
Attack One Brush Truck, minimum 280 gallons of water, minimum 21HP rear mounted gasoline pump, Composite apparatus body, light duty chassis with minimum 16,000 GVWR, 4x4, 60.00-inch cab-to-axle
FS19CB02
Attack One Brush Truck, minimum 280 gallons of water, minimum 21HP rear mounted gasoline pump, metal apparatus body, light duty chassis with minimum 16,000 GVWR, 4x4, 60.00-inch cab- to-axle
FS19CB03
Attack One Brush Truck, minimum 280 gallons of water, minimum 21HP rear mounted gasoline pump, aluminum flatbed, light duty chassis with minimum 16,000 GVWR, 4x4, 60.00-inch cab-to- axle
FS19CB04
Attack One Brush Truck, minimum 280 gallons of water, minimum 21HP rear mounted gasoline pump, aluminum flatbed with exterior riding position, light duty chassis with minimum 16,000 GVWR, 4x4, 60.00-inch cab-to-axle
FS19CD01 Sentinel Support Vehicle, Helitack/Rescue, composite apparatus body, enclosed load bed, light duty chassis with minimum 16,000 GVWR, 4x4, 60.00-inch cab-to-axle FS19CD02 Sentinel Support Vehicle, Superintendent, composite apparatus body, open load bed, light duty chassis with minimum 11,400 GVWR, 4x4, 60.00-inch cab-to-axle FS19CD03 Sentinel Support Vehicle, Highland, composite appar atus body, enclosed load bed, light duty chassis with minimum 11,400 GVWR, 4x4, 60.00-inch cab-to-axle
FS19DB01 BME, Type 3, International HV, 4WD, 4-Door ,Crew Cab. 600 Gallon Water Tank, 25 Gallon Foam Tank, Hale CBP 250 PTO Pump, Pump and Roll Capabili ty, FoamPro 2001 Foam System, FS19DB02 BME, Type 3, Freightliner M2-106, 4WD, 4-Door ,Crew Cab. 600 Gallon Water Tank, 25 Gallon Foam Tank, Hale CBP 250 PTO Pump, Pump and Roll Cap ability, FoamPro 2001 Foam System, FS19DB03
BME, Type 3, Urban Interface (Model 34). International HV, 4WD, 4-Door, Crew Cab. 500 Gallon Water Tank, 25 Gallon Foam Tank, Darley JMP 500 2-Stage Pump, Darley 1-1/2AGE 24 HP Kubota D902 Diesel Auxiliary Pump
FS19DB04
BME, Type 3, Urban Interface (Model 34) Freightliner M2-106, 4WD, 4-Door, Crew Cab. 500 Gallon Water Tank, 25 Gallon Foam Tank, Darley JMP 500 2-Stage Pump, Darley 1-1/2AGE 24 HP Kubota D902 Diesel Auxiliary Pump
FS19DB05
BME, Type 4, International HV, 4WD, 4-Door, Crew Cab. 800 Gallon Water Tank, 25 Gallon Foam Tank, Rear Mounted Darley 1-1/2AGE 34HP Kubota Diesel Pump, Two (2) Hannay 150' Hose Reels, NFPA Compliant Whelen Light Package
FS19DB06
BME, Type 4, Freightliner M2-106, 4WD, 4-Door, Crew Cab. 800 Gallon Water Tank, 25 Gallon Foam Tank, Rear Mounted Darley 1-1/2AGE 34HP Kubota Diesel Pump, Two (2) Hannay 150' Hose Reels, NFPA Compliant Whelen Light Package
FS19DB07
BME, Type 6, Ford F550, 4WD, 4-Door 6.7L Diesel, 6- Speed A/T. 300 Gallon Water Tank Darley 1- 1/2AGE 24HP Kubota D902 Diesel Auxiliary Pump
FS19DB08
BME, Type 6, Dodge 5500, 4WD, 4-Door 6.7L Diesel, 6-Speed A/T. 300 Gallon Water Tank Darley 1-1/2AGE 24HP Kubota D902 Diesel Auxiliary Pump
FS19DB09
BME, Type 6, (Flatbed) Ford F550, 4WD, 4-Door 6.7L Diesel, 6-Speed A/T. 300 Gallon Water Tank Darley 1-1/2AGE 24HP Kubota D902 Diesel Auxiliary Pump
FS19DB10
BME, Type 6, (Flatbed) Dodge 5500, 4WD, 4-Door 6.7L Diesel, 6-Speed A/T. 300 Gallon Water Tank Darley 1-1/2AGE 24HP Kubota D902 Diesel Auxiliary Pump FS19DB11
BME, Type 6, "X-Treme" Dodge 5500, Full Aluminum Body, 300 Gallon Water Tank, Darley 1-1/2 AGE Pump, Off Road Package.

D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile D. Boise Mobile Equipment
B. Wildland Fire Apparatus (Brush Fire)
C. BFX
B. Wildland Fire Apparatus (Brush Fire)

Page 8 of 47 ends

FS19DB12 BME, Type 3, CalFire Model 34, International HV 4x4 chassis, 500 gallon water tank, JMP500 Darley pump, 1-1/2 AGE Darley Aux Pump
FS19DC01
BME, Commercial Pumper, Side Mount, Freightliner Chassis, 1000 Gallon Water Tank, 1500 GPM Pump
FS19DC02
BME, Commercial Pumper, Side Mount, International HV Chassis, 1000 Gallon Water Tank, 1500 GPM Pump
FS19DC03
BME, Commercial Pumper, Top Mount, Freightliner Chassis, 1000 Gallon Water Tank, 1500 GPM Pump
FS19DC04
BME, Commercial Pumper, Top Mount, International HV Chassis, 1000 Gallon Water Tank, 1500 GPM Pump
FS19DC05 BME, Custom Pumper, Side Mount, Custom Chassis, 100 0 Gallon Water Tank, 1500 GPM Pump FS19DC06 BME, Custom Pumper, Top Mount, Custom Chassis, 1000 Gallon Water Tank, 1500 GPM Pump FS19DD01 BME, Walk Around, Light Rescue, Ford F550
FS19DD02 BME, Walk Around, Medium Rescue, Freightliner M2-106, 2WD FS19DD03 BME, Walk Around, Medium Rescue, International MV FS19DE01
BME, Commercial Tender, Freightliner Chassis, Single Axle, 2000 Gallon Water Tank, 750GPM Pump
FS19DE02
BME, Commercial Tender, International Chassis, Single Axle, 2000 Gallon Water Tank, 750GPM Pump
FS19DE03
BME, Commercial Tender, Freightliner Chassis, Tandem Axle, 3000 Gallon Water Tank, 750GPM Pump
FS19DE04
BME, Commercial Tender, International Chassis, Tandem Axle, 3000 Gallon Water Tank, 750GPM Pump
FS19DE05
BME, Tender, Model 22, Freightliner, 2WD, 2-Door, S ingle Axle. 1500 Gallon Stainless Steel Eliptical Water Tank.

FS19DE06
BME, Tender, Model 22, International HV, 2WD, 2-Doo r, Single Axle. 1500 Gallon Stainless Steel Eliptical Water Tank.

FS19EB01 Ford F550 4 door 4x4, 150gpm Gas engine driven pump, 300 Gallon Poly Tank, CustomFIRE Stainless Steel Initial Attack Body
FS19EC01 Freightliner Single Axle, 1500gpm Side Mount, 750 Gallon Poly, CustomFIRE Stainless Steel Pumper Body
FS19EC02 Freightliner Single Axle, 1500gpm Enclosed Top Mount, 750 Gallon Poly, CustomFIRE Stainless Steel Pumper Body, Full Response Crew Cab FS19EC03 Spartan MFD 10" Single Axle, 1500gpm Side Mount, 750 Gallon Poly, CustomFIRE Stainless Steel Pumper Body
FS19EC04 Freightliner 4 door 4x4 Single Axle, 1250gpm Side Mount, 500 Gallon Poly, CustomFIRE Stainless Steel Interface Pumper Body
FS19EC05 Spartan MFD 20" Single Axle, 1500gpm Enclosed Top Mount, 750 Gallon Poly, CustomFIRE Stainless Steel Pumper Body
FS19ED01 Ford F550 4 door 4x4 Single Axle, CustomFIRE Stainless Steel Light Rescue Non-Walk-In Body
E. Pumper/Tankers & Tankers
C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk In Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
E. Custom Fire
B. Wildland Fire Apparatus (Brush Fire)

Page 9 of 47 ends

FS19ED02 Freightliner Single Axle, CustomFIRE Stainless Steel Heavy Rescue Walk-In Body FS19ED03 Freightliner Single Axle, CustomFIRE Stainless Steel Heavy Rescue Non-Walk-In Body FS19ED04 Spartan MFD 10" Single Axle, CustomFIRE Stainless Steel Heavy Rescue Non-Walk-In Body FS19ED05 Spartan MFD 10" Single Axle, CustomFIRE Stainless Steel Heavy Rescue Walk-In Body FS19EE01 Freightliner Single Axle, 500gpm Side Mount, 2000 Gallon Poly, CustomFIRE Stainless Steel Tender Body
FS19EE02 Freightliner Tandem Axle, 500gpm Side Mount, 3000 Gallon Poly, CustomFIRE Stainless Steel Tender Body
FS19EE03 Spartan MFD 10" Tandem, 1500gpm Side Mount, 3000 Gallon Poly, CustomFIRE Stainless Steel Pumper Tanker Body
FS19FB01 Self-Contained Slip-In Unit
FS19FB02 Brush Fire Apparatus, Ford F-550 Chassis, Steel Flatbed FS19FB03 Brush Fire apparatus, Ford F-550 Chassis, Formed Aluminum Flatbed FS19FB04 Brush Fire apparatus, Ford F-550 Chassis, Steel Uti ltiy Bed FS19FB05 Brush Fire apparatus, Ford F-550 Chassis, Formed Aluminum Utility Bed FS19FB06 Brush Fire apparatus Freightliner M-2 4 x4 Chassis Steel flatbed.

FS19FB07 Brush Fire apparatus Freightliner M-2 4 x 4 Chassis Formed Aluminum Flatbed.

FS19FB08 Brush Fire apparatus Freightliner M-2 4 x 4 Chassis Formed Aluminum Utility Bed.

FS19FB09 Brush Fire Apparatus, Dodge 5500 Chassis, Steel Flatbed FS19FB10 Brush Fire Apparatus, Dodge 5500 Chassis, Formed Aluminum Flatbed FS19FB11 Brush Fire Apparatus, Dodge 5500 Chassis, Formed Aluminum Utility Bed FS19FB12 Brush Fire Apparatus, IH HV507 Chassis, 4x4, Formed Aluminum Flatbed FS19FB13 Brush Fire Apparatus, IH HV507 Chassis, 4x4, Formed Aluminum Utility Bed FS19FB14 Brush Fire Apparatus, Chevrolet 5500 Chassis, Formed Aluminum Flatbed FS19FB15 Brush Fire Apparatus, Chevrolet 5500 Chassis, Formed Aluminum Utility Bed FS19GB01 Skid Unit, 250 gallon tank, 150 GPM pump, pump engine, booster reel with booster hose .

FS19GB02 High pressure skid unit
FS19GB03 Wildland Flatbed, Ford F550 4x4 chassis, aluminum flatbed, 300 gallon skid unit, 150 GPM pump FS19GB04 Wildland Flatbed, Ram 5500, 4x4 chassis, aluminum flatbed, 300 gallon skid unit, 150 GPM pump FS19GB05 Wildland quick attack body, Ford F550, 4x4 diesel, 3/16" aluminum body, 300 gallon skid, 150GPM pump.

FS19GB06 Wildland quick attack body, Ram 5500, 4x4 diesel, 3/16" aluminum body, 300 gallon skid, 150GPM pump.

FS19GB07 Wildland Flatbed, Freightliner/M2, 1000 gallon wate r, 300 GPM pump, aluminum flatbed, pump and roll.

FS19GB08 Wildland Flatbed, I-H chassis, 1000 gallon water, 300 GPM pump, aluminum flatbed, pump and roll.

FS19GB09 Wildland Flatbed, Peterbilt chassis, 1000 gallon water, 300 GPM pump, aluminum flatbed, pump and roll.

FS19GB10 Wildland Flatbed, Kenworth chassis, 1000 gallon water, 300 GPM pump, aluminum flatbed, pump and roll
FS19GB11 Danko Quick Attack, Ford F550 4x4 diesel, 3/16" painted aluminum body, 300 gallon water, 150GPM pump.

B. Wildland Fire Apparatus (Brush Fire)
B. Wildland Fire Apparatus (Brush Fire)
G. Danko
E. Pumper/Tankers & Tankers
F. DACO

Page 10 of 47 ends

FS19GB12 Danko Quick Attack, Ram 5500, 4x4 diesel, 3/16" painted aluminum body, 300 gallon water 150GPM pump.

FS19GD01 Rescue, Ford F550, 4x4 chassis, Non-Walk-In Rescue Body, 10' painted 3/16" aluminum body.

FS19GD02 Rescue, Ram 5500, 4x4 chassis, Non-Walk-In Rescue Body, 10' painted 3/16" aluminum body.

FS19GE01 Ford 550, Mini Pumper 4 door, 4x4, diesel chassis, 1250GPM pump, 300 gallon water, painted 3/16" aluminum body.

FS19GE02 IHC, 2-door chassis, Pumper Tanker, single axle, 750 GPM pump, 2000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE03 Freightliner, 2-door chassis, Pumper Tanker, single axle, 750 GPM pump, 2000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE04 Kenworth, 2-door chassis, Pumper Tanker, single axle, 750 GPM pump, 2000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE05 Peterbilt, 2-door chassis, Pumper Tanker, single axle, 750 GPM pump, 2000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE06 IHC, 2-door chassis, Pumper Tanker, tandem axle, 750 GPM pump, 3000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE07 Freightliner, 2-door chassis, Pumper Tanker, tandem axle, 750 GPM pump, 3000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE08 Kenworth, 2-door chassis, Pumper Tanker, tandem axle, 750 GPM pump, 3000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE09 Peterbilt, 2-door chassis, Pumper Tanker, tandem axle, 750 GPM pump, 3000 gallon poly tank, swivel dump valve, hose bed, LED lighting
FS19GE10 IHC, 2-door chassis, Tanker, single axle, 400 GPM auxiliary pump with diesel engine, 2000 gallon poly tank, stainless plumbing, swivel dump, LED lights
FS19GE11 Freightliner 2-door chassis, Tanker, single axle, 400 GPM auxiliary pump with diesel engine, 2000 gallon poly tank, stainless plumbing, swivel dump, LED lights FS19GE12 Kenworth, 2-door chassis, Tanker, single axle, 400 GPM auxiliary pump with diesel engine, 2000 gallon poly tank, stainless plumbing, swivel dump, LED lights FS19GE13 Peterbilt, 2-door chassis, Tanker, single axle, 400 GPM auxiliary pump with diesel engine, 2000 gallon poly tank, stainless plumbing, swivel dump, LED lights FS19GE14 IHC, 2-door chassis, Tanker, tandem axle, 400 GPM auxiliary pump with diesel engine, 3000 gallon poly tank, stainless plumbing, swivel dump, LED lights
FS19GE15 Freightliner, 2-door chassis, Tanker, tandem axle, 400 GPM auxiliary pump with diesel engine, 3000 gal poly tank, stainless plumbing, swivel dump, LED lights FS19GE16 Kenworth, 2-door chassis, Tanker, tandem axle, 400 GPM auxiliary pump with diesel engine, 3000 gallon poly tank, stainless plumbing, swivel dump, LED lights FS19GE17 Peterbilt, 2-door chassis, Tanker, tandem axle, 400 GPM auxiliary pump with diesel engine, 3000 gallon poly tank, stainless plumbing, swivel dump, LED lights FS19GE18 Ford 750 2-door chassis, Tanker, single axle, 400 GPM auxiliary pump with gas engine, 1800 gallon poly tank, stainless plumbing, swivel dump, LED lights.

FS19GE19 Freightliner, 2 door chassis, Crossmount pumper, single axle, 1000 GPM pump with V10 Gas Engine, 1000 gallon poly tank, top mount controls, ladder storage, LED lights, aluminum body.

FS19GE20 Freightliner, 4 door chassis, Pumper, single axle, 1250 GPM pump, 1000 gallon poly tank, aluminum body, ladder storage, hosebed, side mount controls, LED lights.

FS19GE21 Freightliner, 4 door chassis, Pumper/tanker, 1250 GPM pump, 1600 gallon poly tank, aluminum body, rear swivel dump, portable tank storage, hosebed, LED lights FS19HA01 Spartan Single Rear Axle Chassis, Poly Body, 1500 GPM Midship CAFS Pump, Rear Mount 78 ft Steel Aerial, 500 Gallon Tank
FS19HA02 Spartan Tandem Rear Chassis, Poly Body, 1500 GPM Midship CAFS Pump, Rear Mount 109 ft Steel Aerial, 300 Gallon Tank
E. Pumper/Tankers & Tankers
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
H. Darley

Page 11 of 47 ends

FS19HB01 Darley Wildland Attack Unit, Ford F550, Poly Body with Foam System FS19HC01 IH 2-Door Single Rear Axle Chassis, Poly Body, 1500 GPM CAFS Midship Pump, 1000 Gallon Tank
FS19HC02 Spartan Single Rear Axle Chassis, Poly Body, 1500 GPM CAFS Midship Pump, 1000 Gallon Tank FS19HC03 Spartan Tandem Rear Axle Chassis, Poly Body, 1500 GPM Midship Pump, 2500 Gallon Tank FS19HD01 IH 2-Door Single Rear Axle, Heavy Rescue Poly Body, Non-Walk-In Body FS19HD02 Spartan Single Rear Axle, Heavy Rescue Poly Body, Non-Walk-In Body FS19HE01 Spartan Single Rear Axle Chassis, Poly Body, 1000 GPM Midship Pump, 2000 Gallon Tank FS19HE02 IH 2-Door Tandem Rear Axle Chassis, Poly Body, 1250 GPM Midship Pump, 2500 Gallon Tank FS19HE03 Spartan Tandem Rear Axle Chassis, Poly Body, 1500 GPM Midship Pump, 3500 Gallon Tank FS19IB01 Deep South Wildland Fire Apparatus, Ford Gas F-550 Regular Cab, 4X4, - 9’ Alum. Flatbed Fire Body w/skid unit-150 GPM pump, 250 gallon tank.

FS19IB02 Deep South Wildland Fire Apparatus, IHC 4400 Regular Cab, 4X2, 15’ Alum. Flatbed Fire Body w/skid unit-150 GPM pump, 250 gallon tank.

FS19IB03 Skid Unit, 100 GPM pump, 250 gallon water tank, Hos e reel, 200' of 1" redline FS19IB04 Deep South Wildland Fire Apparatus, Ford Diesel F-350, Regular Cab, 4x4, 8' Factory Truck Bed w/skid unit, 150 GPM pump, 250 gallon water tank
FS19IC01 1000 Series Pumper / KW T-370 2 door. Hi/Low Series Pumper, 750 Gallon Poly Tank - 1/8" Hi/Low Alum. body. Side-mount 1250 GPM pump.

FS19IC02 1000 Series Pumper / Spartan Metro 4 door. Hi/Low Series Pumper, 750 Gallon Poly Tank - 1/8" Hi/Low Alum. Body. Side-mount 1250 GPM pump.

FS19ID01 Quick Response Rescue / Fire Apparatus, Ford Gas F-550 Regular cab, 4X4, 9’ – 1/8" Alum. 68” High Rescue / Fire Body.

FS19ID02 Medium-Duty "Walk-Around" Rescue Body / KW T-370 2- door 12’ – 1/8" Alum. 84” High Rescue / Fire Body.

FS19ID03 Heavy Duty "Walk-Around" Rescue Body/Spartan Metro 4 Door, 18' Alum. 84" High Rescue/Fire Body.

FS19IE01 Classic Series Mild Steel Tank / KW T-370 2 door - 3/16” Semi-Elliptical 1800 gallon coated mild steel tank body & subframe, 500 GPM PTO pump.

FS19IE02 Classic Series Poly Tank / KW T-370 2 door. 1800 gallon Poly Tank 1/8" Aluminum Body & Subframe, 500 GPM PTO pump.

FS19IE03 Classic Series Poly Tank / Spartan Metro 4 dr - 1800 gallon Poly Tank 1/8" Alum. Body & Subframe, 500 GPM PTO pump.

FS19JA01 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, 1500 GPM Single Stage Pump, 500 Gallon Tank, Welded Aluminum 50' Boom - 50 FT. 300# Tip Load, Mid Mount Telescoping Boom with Rescue Ladder I. Deep South
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
C. Pumper Fire Apparatus
J. Emergency One (E-One)
B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus
E. Pumper/Tankers & Tankers
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) E. Pumper/Tankers & Tankers
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
B. Wildland Fire Apparatus (Brush Fire)

Page 12 of 47 ends

FS19JA02 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, 1500 GPM Single Stage Pump, 500 Gallon Tank, Welded Extruded Aluminum HP75 - 75 FT. 550# Tip Load, Rear Mount Telescoping Ladder FS19JA03 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, 1500 GPM Single Stage Pump, 500 Gallon Tank, Welded Extruded Aluminum HP78 - 78 FT. 650# Tip Load, Rear Mount Telescoping Ladder FS19JA04 E-One Quest, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, 1500 GPM Single Stage Pump, 500 Gallon Tank, Welded Extruded Aluminum HP78 - 78 FT. 825# Tip Load, Rear Mount Telescoping Ladder FS19JA05 E-One Typhoon, 4 Door Full Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, No Pump, No Tank, Welded Extruded Aluminum Metro 100 - 100 FT. 300# Tip Load, Rear Mounted Telescopi ng Ladder.

FS19JA06 E-One Typhoon, 4 Door Full Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Single Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Extruded Aluminum HR100 - 100 FT. 300# Tip Load, Rear Mounted Telescoping Ladder.

FS19JA07 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 500 Gallon Tank, Welded Extruded Aluminum HP100 - 100 FT. 550# Tip Load, Re ar Mounted Telescoping Ladder FS19JA08 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Steel HPS105 - 105 FT. 575# Tip Load, Rear Mounted Telescoping Ladder FS19JA09 E-ONE Quest, 4 Door Full Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Extruded Aluminum CR137 - 137 FT. 300# Tip Load, Rear Mount Telescoping Ladder FS19JA10 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Extruded Aluminum L193 - 95' 1305# Tip Load, Mid-Mo unted Telescoping Ladder Platform FS19JA11 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Extruded Aluminum L095- 92' 1025# Tip Load, Rear Mounted Telescoping Ladder with Platform FS19JA12
E-ONE Typhoon, 4 Door full Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Extruded Aluminum HP100 - 100 FT. 1305# Tip Load, R ear Mounted Telescoping Ladder with Platform
FS19JA13 E-ONE Typhoon, 4 Door full Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Steel HPS100P - 100 FT. 1305# Tip Load, Rear Mounte d Telescoping Ladder with Platform FS19JA14 E-One Typhoon, 4-Door Full-Tilt Welded Extruded Aluminum Cab, Six (6) Man Seating, Welded Extruded Aluminum Body, Tandem Axle, 1500 GPM Single Stage Pump, 300 Gallon Tank, Welded Steel SM10 100' 1305# Tip Load, Mid Mounted Telesco ping Ladder with Platform FS19JA15 E-One Typhoon, 4-Door Full-Tilt Aluminum Cab, Extruded Aluminum Body, Tandem/Axle, 2000 GPM Single Stage Pump, 300 Gallon Tank, Bronto 116' + 1400# Tip Load Rear Mounted Telescoping & Articulating Steel Boom with Platform
FS19JB01 E-ONE Ford F550 4X4 Quick Attack Pumper, 500 GPM, Welded E xtruded Aluminum Body, Single Axle, Side Mount Pump Module
B. Wildland Fire Apparatus (Brush Fire)

Page 13 of 47 ends

FS19JC01 Freightliner M2, 2-Door Commercial Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module
FS19JC02 International 4400, 2-Door Commercial Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module
FS19JC03 Kenworth T370, 2-Door Commercial Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module
FS19JC04 Peterbilt 348, 2-Door Commercial Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module
FS19JC05 E-One Typhoon, 4-Door Custon Full-Tilt Welded Aluminum Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module FS19JC06 E-ONE Typhoon, 4 Door Custom Full Tilt Welded Aluminum Cab, Rear Engine Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module FS19JC07 E-ONE Quest, 4 Door Custom Full Tilt Welded Aluminum Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Rear Mount Pump Module FS19JC08 E-One Typhoon Urban Interface Pumper, 4-Door Custon Full-Tilt Welded Aluminum Cab, Pumper, Welded Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mount Pump Module FS19JD01 Ford F550, 2-Door, OEM Cab, Single Axle, Welded Ext ruded Aluminum Body, Non-Walk-In Rescue
FS19JD02 Freightliner M2, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Non-Walk-In Rescue
FS19JD03 International 4400, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Non-Walk- In Rescue
FS19JD04 Kenworth T370, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Non-Walk-In Rescue
FS19JD05 Peterbilt 348, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Non-Walk-In Rescue
FS19JD06 Kenworth T370, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Walk-In Rescue
FS19JD07 Peterbilt 348, 2-Door, OEM Cab, Single Axle, Welded Extruded Aluminum Body, Walk-In Rescue FS19JD08 Freightliner M2, 2-Door, OEM Cab, Single Axle, Welded Stainless Body, Walk-In Rescue FS19JD09 International 4400, 2-Door, OEM Cab, Single Axle, Welded Stainless Body, Walk-In Rescue FS19JD10
Kenworth T370, 2-Door, OEM Cab, Single Axle, Welded Stainless Body, Walk-In Rescue FS19JD11 Peterbilt 348, 2-Door, OEM Cab, Single Axle, Welded Stainless Body, Walk-In Rescue FS19JD12 E-One Typhoon, 4-Door Custom, Full-Tilt, Welded Aluminum Cab, Single Axle, Welded Extruded Aluminum Body, Non-Walk-In Rescue
FS19JD13 E-One Typhoon , 4-Door Custom, Full-Tilt, Welded Aluminum Cab, Single Axle, Welded Extruded Aluminum Body, Walk-In Rescue
FS19JE01 Freightliner M2, 2-Door, Commercial Cab, Pumper/Tanker, Welded Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pump Module
FS19JE02 International, 2-Door, Commercial Cab, Pumper/Tanker, Welded Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pump Module
FS19JE03 Kenworth T370, 2-Door, Commercial Cab, Pumper/Tanker, Welded Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pump Module
FS19JE04 Peterbilt 348, 2-Door, Commercial Cab, Pumper/Tanker, Welded Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pump Module
FS19JE05 International 4400, 2-Door Commercial Cab, 2000 Gallon Tanker, Wet Side Body, Single Axle, 500 GPM Pump, Stainless Steel Body
E. Pumper/Tankers & Tankers
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
C. Pumper Fire Apparatus

Page 14 of 47 ends

FS19JE06 Freightliner M2, 2-Door Commercial Cab, 2000 Gallon Tanker, Wet Side Body, Single Axle, 500 GPM Pump, Stainless Steel Body
FS19JE07 Kenworth T370, 2-Door Commercial Cab, 2000 Gallon Tanker, Wet Side Body, Single Axle, 500 GPM Pump, Stainless Steel Body
FS19JE08 Peterbilt 348, 2-Door Commercial Cab, 2000 Gallon Tanker, Wet Side Body, Single Axle, 500 GPM Pump, Stainless Steel Body
FS19JE09 International, 2-Door Commercial Cab, rear 3000 Gallon Tanker, Wet Side Body, Tandem Axle, 500 GPM Pump, Stainless Steel Body
FS19JE10 Freightliner M2, 2-Door Commercial Cab, rear 3000 Gallon Tanker, Wet Side Body, Tandem Axle, 500 GPM Pump, Stainless Steel Body
FS19JE11 Kenworth T370, 2-Door Commercial Cab, rear 3000 Gallon Tanker, Wet Side Body, Tandem Axle, 500 GPM Pump, Stainless Steel Body
FS19JE12 Peterbilt 348, 2-Door Commercial Cab, rear 3000 Gallon Tanker, Wet Side Body, Tandem Axle, 500 GPM Pump, Stainless Steel Body
FS19JE13 International 4400, 2-Door, Commercial Cab, 2000 Gallon Elliptical Vacuum Tanker, Welded Stainless Steel Body, Single Axle, 500 GPM Pump
FS19JE14 International, 2-Door, Commercial Cab, 3500 Gallon Elliptical Vacuum Tanker, Welded Stainless Steel Body, Tandem Axle, 500 GPM Pump
FS19JE15 Freightliner M2, 2-Door, Commercial Cab, 2000 Gallon Elliptical Vacuum Tanker, Welded Stainless Steel Body, Single Axle, 500 GPM Pump
FS19JE16 Freightliner, 2-Door, Commercial Cab, 3500 Gallon Elliptical Vacuum Tanker, Welded Stainless Steel Body, Tandem Axle, 500 GPM Pump
FS19JE17 E-ONE Typhoon, 4-Door, Custom Full-Tilt, Welded Aluminum Cab, Pumper/Tanker, Welded Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pump Module FS19JF01 E-ONE Titan 4x4 P801-Class 4 ARFF, Coil Spring Susp ension, 1585 water/205 foam gallons, 500 lbs dry chemical, NFPA 414 & FAA Compliant)
FS19JF02 E-ONE Titan 6x6 P811, Class 5 ARFF, Coil Spring Sus pension, 3170 water/420 foam gallons, 500 lbs dry chemical, NFPA 414 & FAA Compliant
FS19KD01 Ford F-550 2-Door, Single Axle | 10' Non-Walk-In Rescue (Aluminum) FS19KD02 Ford F-550 2-Door, Single Axle | 12' Non-Walk-In Rescue (Aluminum) FS19KD03 Ford F-550 4-Door, Single Axle | 12' Non-Walk-In Rescue (Aluminum) FS19KD04 Ford F-550 2-Door, Single Axle | 12' Walk-In Rescue (Aluminum) FS19KD05 Freightliner M2, 2-Door, Single Axle | 16' Non-Walk-In Rescue (Aluminum) FS19KD06 International 4400, 2-Door, Single Axle | 16' Non-Walk-In Rescue (Aluminum) FS19KD07 Freightliner M2, 4-Door, Single Axle | 16' Non-Walk-In Rescue (Aluminum) FS19KD08 Freightliner M2, 2-Door, Single Axle | 16' Walk-In Rescue (Aluminum) FS19KD09 International 4400, 2-Door, Single Axle | 16' Walk-In Rescue (Aluminum) FS19KD10 Freightliner M2, 4-Door, Single Axle | 18' Walk-In Rescue (Aluminum) FS19KD11 International 4400, 4-Door, Single Axle | 18' Walk-In Rescue (Aluminum) FS19KD12 Freightliner M2, 2-Door, Single Axle | 18' Crew-Body Rescue (Aluminum) FS19KD13 Freightliner M2, 2-Door, Single Axle | 18' Mobile Command Center (Aluminum) FS19KD14 Spartan, 4-Door Full Tilt, Single Axle | 21' Non-Walk-In Rescue (Aluminum) FS19KD15 Spartan, 4-Door Full Tilt, Single Axle | 21' Walk-In Rescue (Aluminum) FS19KD16 Freightliner M2, 4-Door, Single Axle | 25' Walk-In Rescue (Aluminum) FS19KD17 International 4400, 4-Door, Single Axle | 25' Walk-In Rescue (Aluminum) FS19KD18 Freightliner M2, 4-Door, Tandem Axle | 25' Walk-In Rescue (Aluminum) FS19KD19 International 4400, 4-Door, Tandem Axle | 25' Walk-In Rescue (Aluminum) FS19KD20 Spartan, 4-Door, Full Tilt, Tandem Axle | 30' Walk-In Rescue (Aluminum) FS19KD21 Freightliner M2, 2-Door, Tandem Axle | 30' Walk-In Command Center (Aluminum) D. Special Service Apparatus (Walk-In & Non-Walk In Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile K. Emergency Vehicles, Inc. (EVI)
F. Airport Rescue Fire-Fighting Vehicles

Page 15 of 47 ends

FS19KD22 Ford F-550 2-Door, Single Axle | 14' Crew-Body Rescue (Aluminum) FS19KD23 Ford F-550 4-Door, Single Axle | 12' 1250 GPM Mini- Pumper (Aluminum) FS19KD24 Ford F-550 2-Door, Single Axle | 10' Quick Attack (Aluminum) FS19KD25 Ford Expedition SUV Single Axle | Command Vehicle FS19KD26 Ford F-350 4-Door Pick Up, Single Axle | Command Vehicle FS19KD27 Ford F-550 2-Door, Single Axle | 16' Walk-In Special Service Unit (Aluminum) FS19KD28 Ford Transit 350, Single Axle | Command Unit
FS19KD29 Freightliner M2 2-Door, Single Axle | 32' Walk-In Command Center (Aluminum) FS19KD30 Spartan, 3-Door, Single Axle | 24' Crew-Body Haz-Mat Unit (Aluminum) FS19KD31 Spartan, 3-Door, Single Axle | 24' Non-Walk-In Haz-Mat Unit (Aluminum) FS19KD32 Spartan, 4-Door Tandem Axle | 26' Non-Wak-In Rescue (Aluminum) FS19KD33 International 4400 2-Door, Single Axle | 15' Air-Light Unit (Aluminum) FS19KD34 Ford F-550 Super Cab, Single Axle | 10' ESU Unit (Aluminum) FS19KD35 Ford Transit 350, single axle tactical unit
FS19LA01 Cinder, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 57' Rear Mounted Telescoping Ladder
FS19LA02 Igniter, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 57' Rear Mounted Telescoping Ladder
FS19LA03 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 57' Rear Mounted Telescoping Ladder
FS19LA04 Cinder, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 77' Rear Mounted Telescoping Ladder
FS19LA05 Igniter, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 77' Rear Mounted Telescoping Ladder
FS19LA06 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Single Axle, 77' Rear Mounted Telescoping Ladder
FS19LA07 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 107' Rear Mounted Telescoping Ladder
FS19LA08 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 127' Rear Mounted Telescoping Ladder
FS19LA09 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 100' Mid-Mounted Telescoping Ladder
FS19LA10 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 85' Mid-Mounted Telescoping Ladder with Platform
FS19LA11 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 85' Rear Mounted Telescoping Ladder with Platform
FS19LA12 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 100' Rear Mounted Telescoping Ladder with Platform
FS19LA13 Inferno, 4-Door Full-Tilt OEM Cab, Extruded Aluminum Body, Tandem Axle, 100' Mid-Mounted Telescoping Ladder with Platform
FS19LA14 Inferno, 4-Door Full-Tilt OEM Cab, Aluminum Body, Tandem Axle, 100' Tractor Drawn Ladder FS19LB01 Self-Contained Slip-In Unit
FS19LB02 Ferrara Brush Fire Apparatus, Ford Truck, Extruded Aluminum Flatbed FS19LB03 Ferrara Brush Fire Apparatus, Dodge Truck, Extruded Aluminum Flatbed FS19LC01 Freightliner M2, 2-Door, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19LC02 Freightliner M2, 4-Door, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19LC03 Custom Cinder, 4-Door, Full-Tilt Cab, Extruded Aluminum Body, Single Axle, 1500 GPM Pump, Mid-Mounted Pumper
FS19LC04 Custom Igniter, 4-Door, Full-Tilt Cab, Extruded Aluminum Body, Single Axle, 1500 GPM Pump, Mid-Mounted Pumper
L. Ferrara
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus

Page 16 of 47 ends

FS19LC05 Custom Inferno, 4-Door, Full-Tilt Cab, Extruded Aluminum Body, Single Axle, 1500 GPM Pump, Mid-Mounted Pumper
FS19LD01 Ford 550, 2-door Cab, Single Axle, Extruded Aluminu m Body, NON-Walk-In LIGHT Rescue FS19LD02
Ford 550, 2-door Super Cab, Single Axle, Extruded A luminum Body, NON-Walk-In LIGHT Rescue FS19LD03 Ford 550, 4-door Cab, Single Axle, Extruded Aluminu m Body, NON-Walk-In LIGHT Rescue FS19LD04 Freightliner M2, 2-door Cab, Single Axle, Extruded Aluminum Body, NON-Walk-In MEDIUM Rescue
FS19LD05 Freightliner M2, 4-door Cab, Single Axle, Extruded Aluminum Body, NON-Walk-In MEDIUM Rescue
FS19LD06 Freightliner M2, 2-door Cab, Single Axle, Extruded Aluminum Body, Walk-In MEDIUM Rescue FS19LD07 Freightliner M2, 4-door Cab, Single Axle, Extruded Aluminum Body, Walk-In MEDIUM Rescue FS19LD08 Cinder, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, NON Walk-In HEAVY Rescue
FS19LD09 Cinder, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, Walk-In HEAVY Rescue
FS19LD10 Igniter, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, NON Walk-In HEAVY Rescue
FS19LD11 Igniter, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, Walk-In HEAVY Rescue
FS19LD12 Inferno, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, NON Walk-In HEAVY Rescue
FS19LD13 Inferno, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, Walk-In HEAVY Rescue
FS19LD14 Inferno, 4-Door, Full-Tilt, OEM Cab, Single Axle, Extruded Aluminum Body, Incident Command Vehicle
FS19LE01 M2 Freightliner, 2-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pumper/Tanker (3000 Gallons)
FS19LE02 M2 Freightliner, 4-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pumper/Tanker (3000 Gallons)
FS19LE03 Custom Cinder 2, 4-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid- Mounted Pumper/Tanker (3000 Gallons)
FS19LE04 Custom Igniter, 4-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pumper/Tanker (3000 Gallons)
FS19LE05 Custom Inferno, 4-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, Mid-Mounted Pumper/Tanker (3000 Gallons)
FS19MB01 Firematic, RALLY B.R.A.T. ® Ford F550, 4WD, 4-Door , Aluminum flatbed body, 300 Gallon Water Tank, 18 HP Pump, Pump and Roll Capability, Super Single wheels and tires FS19MB02 Firematic, Rally B.R.A.T. ® Ford F550, 4WD, 4-Door , Aluminum compartment body, 300 Gallon Water Tank, 18 HP Pump, Pump and Roll Capability, Super Single wheels and tires FS19MB03 Firematic, Rally B.R.A.T. ® Ford F350, 4WD, 2-Door , Aluminum flatbed body, 250 Gallon Water Tank, Hale HPX200 Pump, Pump and Roll Capability, Super Single wheels and tires FS19MB04 Firematic, Army 2.5 ton Brush Breaker, 6WD, 2-Door , Steel flatbed and tube body, 600 Gallon Water Tank, Hale 30FS/Deutz Diesel Pump, Pump and Roll Capability FS19MB05
Firematic, Army 5 ton Brush Breaker, 6WD, 2-Door , Steel flatbed and tube body, 1000 Gallon Water Tank, Hale 30FS/Deutz Diesel Pump, Pump and Roll Capability, Super Single wheels and tires
E. Pumper/Tankers & Tankers
M. Firematic
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile B. Wildland Fire Apparatus (Brush Fire)

Page 17 of 47 ends

FS19MB06 Firematic, Rally B.R.A.T. ® Dodge 5500, 4WD, 4-Door , Aluminum flatbed body, 300 Gallon Water Tank, 18 HP Pump, Pump and Roll Capability, Super S ingle wheels and tires FS19MB07
Firematic, B.R.A.T. ® Ford F550, 4WD, 4-Door , Aluminum flatbed body, Aluminum investment protection cage, 300 Gallon Water Tank, 18 HP Pump, Pump and Roll Capability, Super Single wheels and tires
FS19MB08 Firematic, Rally Grass Rig Ford F450, 4WD, 2-Door , Aluminum flatbed body with walkway, 300 Gallon Water Tank, Hale HPX200 Pump, Pump and Roll Capability, Super Single wheels and tires FS19MC01 Firematic, B.R.A.T. ® 1000. Commercial Pumper, Aluminum compartment body, Mid Mount, Ford F550 4x4, 300 Gallon Water Tank, 1250 GPM Pump
FS19MC02 Firematic, Rally B.R.A.T. ® 1000. Commercial Pumper, Aluminum flatbed body, Mid Mount, Ford F550 4x4, 300 Gallon Water Tank, 1250 GPM Pump
FS19MC03 Firematic, Brute Commercial Pumper, Aluminum compartment body, Front Mount, Freightliner 4x4, 750 Gallon Water Tank, 1250 GPM Pump
FS19MC04 Firematic, Brute Commercial Pumper, Aluminum compartment body, Front Mount, International 7400 4x4, 750 Gallon Water Tank, 1500 GPM Pump
FS19MC05 Firematic, Brute Commercial Pumper, Aluminum compartment body, Mid Mount, 750 Gallon Water Tank, 1250 GPM Pump
FS19MD01 Firematic, Rescue B.R.A.T. ® Non Walk In, Aluminum Body Light Rescue, Ford F550 FS19MD02 Firematic, Rescue B.R.A.T. ® Walk In, Aluminum Body Light Rescue, Ford F550 FS19MD03 Firematic, Commercial Rescue, non Walk In, Aluminum Body FS19MD04 Firematic, Commercial Rescue, Walk In, Aluminum Body FS19MD05 Firematic, Special Purpose, Chief's Vehicle, Ford FS19MD06 Firematic, Special Purpose, Chief's Vehicle, Chevy FS19MD07 Firematic, Special Purpose, Chief's Vehicle, Dodge FS19NA01 Ahrens-Fox Fire Engine Co. AF1 Chassis, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, Stainless Steel Body, 1500 GPM Single Stage Pump, 400 Gallon Tank, Steel Ladder, 1000# Tip Load, Rear Mounted Telescoping Ladder FS19NA02
HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, Stainless Steel Body, 1500 GPM Single Stage Pump, 400 Gallon Tank, Steel Ladder HAF80L, 1000# Tip Load, Rear Mounted Telescoping Ladder
FS19NA03 Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Tandem Axle, Stainless Steel Body, 1500 GPM Single Stage Pump, 400 Gallon Tank, Steel Ladder, 1000# Tip Load, Rear Mounted Telescoping Ladder FS19NA04
HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Tandem Axle, Stainless Steel Body, 1500 GPM Single Stage Pump, 400 Gallon Tank, Steel Ladder HAF111L, 1000# Tip Load, Rear Mounted Telescoping Ladder FS19NA05
HME SFO, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, Stainless Steel Body, 1500 GPM Single Stage Pump, 500 Gallon Tank, HAF51T, 1000# Tip Load, Rear Mounted Steel Boom
FS19NA06
Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six Man Seating, Tandem Axle, Stainless Steel Body, 10GPM Single Stage Pump, 500 Gallon Tank, Stainless Platform, 500# Tip Load, Rear Mounted Telescoping Ladder FS19NB01 HME Ford F-550 4x4 Initial Attack MiniEvo, 1500 GPM Side Mounted Pump, Stainless Steel Body, 400 Gallons
N. HME
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk In Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center

Page 18 of 47 ends

FS19NB02 HME SFO Initial Attack Type I, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, 1250 GPM Side Mounted Pump, Stainless Stee l Body, Single Axle, 850 Gallons FS19NB03 HME International 4x4 Quick Attack Type III/34D, 500 GPM Side Mounted Pump, Stainless Steel Body, Single Axle, 500 Gallons
FS19NB04 Ahrens-Fox Fire Engine Co. WUI (Wildland Urban Interface), 4-Door Custom, SFO-MFDxl, 4x4 AWD, Extruded Aluminum Cab, Four (4) Man Seating, 1500 GPM Distributed Water System, Pump and Roll, Stainless Steel Body, 700 Gallons, Michelin 445/50R 22.5 Super Single Tires FS19NC01 Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Pumper, Stainless Steel Body, Single Axle, 1250 GPM Side Mounted Pump, 1045 Gallons FS19NC02 HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Pumper, Stainless Steel Body, Single Axle, 1250 GPM Side Mounted Pump, 1045 Gallons FS19NC03 HME SFO, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Pumper, Stainless Steel Body, Single Axle, 1250 GPM Side Mounted Pump, 1045 Gallons FS19NC04 HME International 2-Door Commercial Cab, Pumper, Stainless Steel Body, Single Axle, 1250 GPM Side Mounted Pump, 1045 Gallons
FS19NC05 HME International 4-Door Commercial Cab, Pumper, Stainless Steel Body, Single Axle, 1250 GPM Side Mounted Pump, 1045 Gallons
FS19NC06
HME 4x4 SFO H.X.R., 4-Door Custom Full-Tilt Extrude d Aluminum Cab, Six (4) Man Seating, Pumper, Stainless Steel Body, Single Axle, 1500 GPM Side Mounted Pump, 500 Gallon Tank, Michelin 445/50R 22.5 Super Single Tires
FS19ND01 Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 14' Stainless Steel Body, Non-Walk-In Rescue FS19ND02 HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 14' Stainless Steel Body, Non-Walk-In Rescue
FS19ND03 HME SFO, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 14' Stainless Steel Body, Non-Walk-In Rescue
FS19ND04 Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 18' Stainless Steel Body, Non-Walk-In Rescue FS19ND05 HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 18' Stainless Steel Body, Non-Walk-In Rescue
FS19ND06 HME SFO, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Single Axle, 18' Stainless Steel Body, Non-Walk-In Rescue
FS19ND07 HME Ford F-550 4x4 4-Door Light Rescue PackRat, Non -Walk-In Stainelss Steel Rescue Body FS19NE01
Ahrens-Fox Fire Engine Co. AF1, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Stainless Steel Body, Tandem Axle, 1250 GPM Side Mounted Pumper/Tanker, 3000 Gallons
FS19NE02 HME 1871W, 4-Door Custom Full-Tilt Extruded Aluminum Cab, Six (6) Man Seating, Stainless Steel Body, Tandem Axle, 1250 GPM Side Mounted Pumper/Tanker, 3000 Gallons FS19NE03 HME International 2-Door Commercial Cab, Stainless Steel Body, Tandem Axle, 1250 GPM Side Mounted Pumper/Tanker, 3000 Gallons
FS19NE04 HME International 4-Door Commercial Cab, Stainless Steel Body, Tandem Axle, 1250 GPM Side Mounted Pumper/Tanker, 3000 Gallons
FS19OA01 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 79' 500# Rear Mounted Telescoping Steel Ladder
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
E. Pumper/Tankers & Tankers
O. KME

Page 19 of 47 ends

FS19OA02 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 103', 4 Section, 500# Rear Mounted Telescoping Steel Ladder
FS19OA03 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 79' 750# Rear Mounted Telescoping Steel Ladder
FS19OA04 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 123' 500# Rear Mounted Telescoping Steel Ladder
FS19OA05 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 102' 1000# Rear Mounted Telescoping Ladder with Platform
FS19OA06 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 100' 1000# Mid- Mounted Telescoping Ladder with Platform
FS19OA07 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 100' 500# (Mid- Mount), Telescoping Steel Ladder
FS19OA08 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 55' Water Tower (FireStix)
FS19OA09 International 4400, 4-Door, Formed Aluminum Body, Single Axle, 55' Water Tower (FireStix) FS19OA10 KME, 4-Door Full-Tilt Aluminum Cab, Formed Aluminum Body, Tractor Drawn Aerial (TDA), 100', 4 Section 500# Steel Telescoping Ladder
FS19OB01 Ford F-550, 4 x 4, 2-Door, Skid Mounted Pumper Body FS19OB02 Ford F-550, 4 x 4, 2-Door, Flatbed Style Skid Mount ed Pumper FS19OB03 Ford F-550, 4 x 4, 2-Door, Aluminum Minipumper Body , 300 gal. Tank, 1000 gpm Midship PTO Pump
FS19OB04 International 7400, 4x4, 4-Door, Ridgerunner, Dual Pump, 500/20 Gals Water/Foam, NFPA 1901/1906
FS19OB05 International 7400, 4 x 4, 4-Door, OEM Interface Pu mper, Formed Alum Body, Single Axle, 750 GPM, 500 Gallon Water
FS19OC01 Freightliner M2, 2-Door, OEM Pumper, Formed Aluminum Body, Single Axle, 1250 GPM Pump, 750 Gal Tank-Challenger Series Pumper
FS19OC02 International 4400, 2-Door, OEM Pumper, Formed Alu minum Body, Single Axle, 1250 GPM Pump, 750 Gal Tank-Pumper
FS19OC03 KME Panther Chassis, 4-Door, Full-Tilt, Aluminum Cab, Formed Aluminum Body, Single Axle, 1250 GPM Pump, 750 Gal Tank-Pumper
FS19OC04 KME Predator Chassis, 4-Door, Full-Tilt, Aluminum Cab, Alum Body, Single Axle, 1250 GPM Pump, Pumper
FS19OC05 KME Severe Service Chassis, 4-Door, Full-Title, Aluminum Cab, Alum Body, Single Axle, 1250 GPM Pump, 750 Gal Tank Pumper
FS19OD01 Ford F-550 4 x 2 Chassis, 2 Door, Light Duty Walk-Around Body FS19OD02 Intl 4300, 4 x 2, 2-Door, Medium Duty Walk-Around Body FS19OD03 International 4400, 4 x 2, 2-Door, Medium Duty Walk-In Body FS19OD04 KME Predator Chasis, 4-Door, Full-Tilt, Aluminum Cab, Alum Body, Single Axle, Heavy Duty Walk-Around Body
FS19OD05 KME Custom, 4-Door, Full-Tilt, Aluminum Cab, Alum Body, Single Axle, Heavy Duty Combination Walk-in / Walk-Around Body
FS19OD06 International 4400 4x2, 2-Door, 10 person Crew Carr ier FS19OE01 International 4400, 2-Door, Aluminum Treadplate Body, Single Axle, 1250 GPM Pump, Painted 1800 Gal Elliptical Tanker
FS19OE02 International 7400, 2-Door, Aluminum Treadplate Body, Tandem Axle, 1250 GPM Pump, Painted 2500 Gal Elliptical Tanker
FS19OE03 International 4400, 2-Door, Aluminum Treadplate Body, Single Axle, 500 GPM Pump, Painted 1800 Gal Wetside Tanker
FS19OE04 International 7400, 2-Door, Aluminum Treadplate Body, Tandem Axle, 500 GPM Pump, Painted 2500 Gal Wetside Tanker
E. Pumper/Tankers & Tankers
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus

Page 20 of 47 ends

FS19OE05 International 4400, 2-Door, Formed Galvanneal Body, Single Axle, 750 GPM Pump, 1800 Gal Dryside Tanker
FS19OE06 International 7400, 2-Door, Formed Galvanneal Body, Tandem Axle, 750 GPM Pump, 3000 Gal Dryside Tanker
FS19OE07 International 4400, 2-Door, Formed Galvanneal Body, Single Axle, 1250 GPM Pump, 1800 Gal Pumper/Tanker
FS19OE08 International 7400, 2-Door, Formed Galvanneal Body, Tandem Axle, 1250 GPM Pump, 2500 Gal Pumper/Tanker
FS19OE09 KME Predator, 4-Door, Full-Tilt, Aluminum Cab, Alum Body, Tandem Axle, 3,000 Gallon, Pumper- Tanker with 1250gpm Pump
FS19OF01 Ford F550, 4 x 4, 4-Door, Class 1 RIV, 120 GAL AFFF Pre-mix FS19OF02 Ford F550, 4 x 4, 4-Door, Class 2 RIV, 500 GPM Pump , 300/40 Gal Water/Foam Tank FS19OF03 International 7400 4 x 4, 2-Door, Class 3 RIV, 500 GPM Pump, 500/75 Gal Water/Foam Tank FS19OF04 KME Custom Class 4 ARFF, 4 x 4, 2000 GPM, 1500/200 Gal Water/Foam Tank FS19OF05 KME Custom Class 5 ARFF, 6 x 6, 2000 GPM, 3000/400 Gal Water/Foam Tank FS19PA01 Spartan 4-Door, Aluminum Tilt Cab, Extruded Aluminum Body, 1500 GPM Pump, rear mount, 75' 3- section, telescopic steel ladder, Single Axle, 500#, 300 Gal. Tank FS19PA02 Spartan 4-Door, Aluminum Tilt Cab, Extruded Aluminum Body, 1500 GPM Pump, Rear Mount, 110' 4-section telescopic steel ladder, Tandem Axle, 750#, 300 Gal. Tank FS19PC01 IH 4400,2-Door, Pumper, Extruded Aluminum Body, Single axle,1250 GPM Pump, Side Mounted, 750 Gal. Tank
FS19PC02 Freightliner M2, 2-Door, Pumper, Extruded Aluminum Body, Single Axle,1250 GPM Pump, Side Mounted, 750 Gal. Tank
FS19PC03 Spartan 4-Door, Pumper, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side Mounted, 750 Gal.Tank
FS19PD01 Ford F550, 2-Door, Aluminum Extruded Body, Single Axle, Non-Walk-in, Roll up doors, Rescue 12' FS19PD02 IH4400, 2-Door, Aluminum Extruded Body, Single Axle, Non-Walk-in, Roll up doors, Rescue 17' FS19PD03 Spartan 4-Door, Aluminum Tilt Cab, 10" Raised Roof, Aluminum Extruded Body, Single Axle, Non- Walk-in, Roll up doors, Rescue 17'
FS19PD04 IH4400, 2-Door, Aluminim Extruded Body, Single Axle, Walk-in, Roll up doors, Rescue 19' FS19PD05 Spartan 4-Door, Aluminum Tilt Cab, 10" Raised Roof, Aluminum Extruded Body, Walk-in, Single Axle, Roll up doors, Rescue 19'
FS19PE01 IH4400, 2-Door, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, 1800 Gal. Tank, Single Dump Valve
FS19PE02 IH7400, 2-Door, Extruded Aluminum Body, Tandem Axle, 1250 GPM Pump, 3000 Gal. Tank, 3 Dump Valves
FS19PE03 Spartan 2-Door, CustomTilt Cab, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, 1800 Gal. Tank, Single Dump Valve
FS19QB01 Spitfire Series, Quick Attack, 300-Gallon Tank & CET Honda Pump, 9' All Aluminum Body on Ford F550 Diesel, 2-Door, 4X4 Chassis FS19QB02 Spitfire Series, Quick Attack, 300-Gallon Tank & CET Honda Pump, 9' All Aluminum Body on Ram 5500 Diesel, 2-Door, 4X4 Chassis A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
B. Wildland Fire Apparatus
F. Airport Rescue Fire-Fighting Vehicles
E. Pumper/Tankers & Tankers
Q. Maintainer Custom Bodies, Inc. (MCB)
P. Marion

Page 21 of 47 ends

FS19QB03 Spitfire Series, Quick Attack, 300-Gallon Tank & CET Honda Pump, 9' All Aluminum Body on Chevrolet MD Diesel, 2-Door, 4X4 Chassis FS19QB04 Responder Series, Quick Attack Urban Interface, 300-Gallon Tank & CET Honda Pump, 10' All Aluminum Body on Ford F550 Diesel, 2-Door, 4X4 Chassis FS19QB05 Responder Series, Quick Attack Urban Interface, 300-Gallon Tank & CET Honda Pump, 10' All Aluminum Body on Ram 5500 Diesel, 2-Door, 4X4 Chassis FS19QB06 Responder Series, Quick Attack Urban Interface, 300-Gallon Tank & CET Honda Pump, 10' All Aluminum Body on Chevrolet MD Diesel, 2-Door, 4X4 Chassis FS19QD01 MCB Responder Super Squad Series, 9' All Aluminum Walk-Around Squad on Ford F350 Diesel, Super Cab, 4X4 Chassis
FS19QD02 MCB Responder Series 10' All Aluminum Walk-Around Rescue on Ford F450 Diesel, 4-Door, 4X4 Chassis
FS19QD03 MCB Responder Series 10' All Aluminum Walk-Around Rescue on Dodge RAM 5500 Diesel, 4-Door, 4X4 Chassis
FS19QD04 MCB Responder Series 10' All Aluminum Walk-Around Rescue on Chevrolet MD Diesel, 4-Door, 4X4 Chassis
FS19QD05 MCB Responder Series 12' All Aluminum Walk-around Rescue on Ford F550 Diesel, 4-Door, 4X4 Chassis
FS19QD06 MCB Responder Series 12' All Aluminum Walk-Around Rescue on Ram 5500 Diesel, 4-Door, 4X4 Chassis
FS19QD07 MCB Responder Series 12' All Aluminum Walk-Around Rescue on Chevrolet MD Diesel, 4-Door, 4X4 Chassis
FS19QD08 MCB Responder Series 15' All Aluminum Walk-Around Rescue on Ford F550 Diesel, 2-Door, 4X4 Chassis
FS19QD09 MCB Responder Series 15' All Aluminum Walk-Around Rescue on Ram 5500 Diesel, 2-Door, 4X4 Chassis
FS19QD10 MCB Responder Series 15' All Aluminum Walk-Around Rescue on Chevrolet MD Diesel, 2-Door, 4X4 Chassis
FS19QD11 MCB Responder Series 15' Forward Crew Walk-In Rescue on Ford F550 Diesel, 2-Door, 4X2 Chassis
FS19QD12 MCB Responder Series 15' Forward Crew Walk-In Rescue on Ram 5500 4x2 Diesel, 2-Door, 4X4 Chassis
FS19QD13 MCB Responder Series 15' Forward Crew Walk-In Rescue on Chevrolet MD Diesel, 2-Door, 4X4 Chassis
FS19QD14 MCB Responder Series 18' All Aluminum Walk-Around Rescue on International MV607, 2-Door, 4X2 Chassis
FS19QD15 MCB Responder Series 18' All Aluminum Walk-Around Rescue on Freightliner M2-106, 2-Door, 4X2 Chassis
FS19QD16 MCB Responder Series 20' All Aluminum Walk-Around Rescue on International MV607, 2-Door, 4X2 Chassis
FS19QD17 MCB Responder Series 20' All Aluminum Walk-Around Rescue on Freightliner M2-106, 2-Door, 4X2 Chassis
FS19QD18 MCB Responder Series 22' All Aluminum Walk-Around Rescue on International MV607, 2-Door, 4X2 Chassis
FS19QD19 MCB Responder Series 22' All Aluminum Walk-Around Rescue on Freightliner M2-106, 2-Door, 4X2 Chassis
FS19QD20 MCB Responder Series 24' All Aluminum Walk-Around Rescue on International MV607, 2-Door, 4X2 Chassis
FS19QD21 MCB Responder Series 24' All Aluminum Walk-Around Rescue on Freightliner M2-106, 2-Door, 4X2 Chassis
FS19RB01 Self Contained Slide In Unit, 250 gallon
FS19RB02 Metro Brush Truck, Ford F450 2Dr, Aluminum Flat Bed, 300 Tank FS19RB03 Metro Brush Truck, Ford F550 2Dr, Aluminum Flat Bed, 300 Tank D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
R. Metro Fire Apparatus Specialists
B. Wildland Fire Apparatus (Brush Fire)

Page 22 of 47 ends

FS19RB04 Metro Brush Truck, Ford F600 2Dr, Aluminum Flat Bed, 300 Tank FS19RB05 Metro Brush Truck, Ford F650 2Dr, Aluminum Flat Bed, 300 Tank FS19RC01 Metro Mini-Pumper, Ford F550 2Dr, Aluminum Body, 12 50gpm pump, 500 Tank FS19RD01 Metro Light Rescue, Ford F550 2Dr, Aluminum Body, Non-Walk-In FS19RD02 Metro Light Rescue, Ford F600 2Dr, Aluminum Body, Non-Walk-In FS19RD03 Metro Light Rescue, Ford F650 2Dr, Aluminum Body, Non-Walk-In FS19RD04 Spartan Metro Star Chassis
FS19RD05 Spartan Gladiator Chassis
FS19SB01 Midwest Fire Brush Unit - F-550 Diesel, Aluminum Flatbed, Pump and Roll Capabilities, 400 GPM portable pump, 250 gallons, Regular Cab, 60" CA FS19SB02 Midwest Fire Brush Unit - F-550 Diesel, Aluminum Flatbed, Pump and Roll Capabilities, 400 GPM portable pump, 250 gallons, Regular Cab, 84" CA FS19SB03 Midwest Fire All-Poly Quick Attack - F-550 Diesel, Regular Cab, 400 GPM portable pump, 250 gallons, ROM Doors, 84" CA
FS19SC01 Midwest Fire All-Poly Pumper, 1000 Gallon, Rescue Style Lockers, Freightliner M2 Regular Cab, 1250 GPM Pump, Side Mounted Pump, Single Axle FS19SC02 Midwest Fire All-Poly Pumper, 1000 Gallon, Rescue Style Lockers, Freightliner M2 Crew Cab, 1250 GPM Pump, Side Mounted Pump, Single Axle FS19SE01 Midwest Fire All-Poly Tanker-Pumper, 2000 Gallon, Freightliner M2, 1000 GPM PTO, Pump and Roll, Single Axle
FS19SE02 Midwest Fire All-Poly Tanker-Pumper, 3000 Gallon, Freightliner M2, 1000 GPM PTO, Pump and Roll, Tandem Axle
FS19SE03 Midwest Fire All-Poly Tanker, 2000 Gallon, Freightliner M2, 750 GPM PTO pump, Pump and Roll, Single Axle, Under 30'
FS19SE04 Midwest Fire All-Poly Tanker, 3000 Gallon, Freightliner M2, 250 GPM portable pump, pump and roll
FS19SE05 Midwest Fire All-Poly Tactical Tender, 2000 Gallons, Freightliner M2, 750 GPM PTO Pump, Pump and Roll, Short Wheelbase Single Axle
FS19TB01 Brush Fire Apparatus, Ford F-450, 2 door, gas engine Steel Flatbed FS19TB02 Brush Fire Apparatus Ford F-550, 2 Door, Gas Engine, Steel Flatbed w/ work stations FS19TB03 Brush Fire Apparatus, Ford F-550 2 Dr, Diesel engine Extruded Aluminum Flatbed w/ Aluminum comparments
FS19TB04 Brush Fire Apparatus, Ford F-550, 2 Dr, Diesel engine Ply-Utility Body S. Midwest Fire
T. Nevada Pacific Services Inc.

B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus
B. Wildland Fire Apparatus (Brush Fire)
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center
E. Pumper/Tankers & Tankers
C. Pumper Fire Apparatus

Page 23 of 47 ends

FS19TB05 Brush Fire Apparatus, Ford F-550 2 Door, Diesel Engine, with Aluminum Flatbed w/ work stations, Aluminum Compartments
FS19TB06 Ford F-550 XL 4x4, 2-Dr, Gas Engine, 60" CA, Brush Truck,Aluminum flatbed and compartments 300 Gallon Tank, Water Pump, 200gpm Pump.

FS19TB07 Ford F-550 XL 4X4, 4-Dr.,60" CA, Gas engine Brush Truck, Aluminum flatbed w/ Aluminum Compartment., 300 Gallon Tank, 240 gpm water pump.

FS19TB08 Ford F-550 XL 4x4 Crew Cab, Diesel Engine, 60" CA, 9' Multi-Purpose Brush Truck/ Light Rescue 300 Gallon Tank, 300 gpm Water Pump.

FS19TB09 Ford F-550 XL 4x4, 2-Dr, Diesel Engine, 165" WB, 12 ' Rescue Brush Truck, 300 Gallon Tank, Diesel Driven 220 gpm Water Pump.

FS19TB10 Brush Fire Apparatus, Ford F-550, 60" CA, Crew Cab, Diesel Engine Steel Flatbed W/ work stations and Aluminum cabinets, 300 gal drop in tank 200 gpm pump FS19TB11 Brush Fire Apparatus, Ford F-550, Crew Cab, Diesel Engine 60" CA Aluminum Flatbed with work stations and Poly cabinets, 300 gal drop in tank 200 gpm pump FS19TB12 Brush Fire Apparatus, Ford F-550, 60" CA, 2 Door, G as Engine, Steel Flatbed W/ work stations and Aluminum cabinets, 300 gal drop in tank 200 gpm pump FS19TB13 Self- Contained Slip-In Unit,Fire skid unit 11hp Honda pump 200gal tank hose reel with hose (option foam cell system & gallon tank sizes).

FS19TB14 Self-Contained Slip-In-Unit, Fire skid unit 24 hp diesel pump 300 gal tank hose reel with hose, (option foam cell system & gallon tank sizes)
FS19TB15 Self-Contained Slip-In-Unit, Fire skid unit 18 hp gasoline pump 400 gal tank hose reel with hose, (option foam cell system & gallon tank sizes)
FS19TB16 Self-Contained Slip-In-Unit, Fire skid unit 18 hp gasoline pump 400 gal tank hose reel with hose, (option foam cell system & gallon tank sizes)
FS19TB17 Self-Contained Slip-In-Unit, Fire skid unit CAFS 400gal tank(STORED ENERGY) hose reel with hose (potion foam cell system & purple K, & gallon tank sizes).

FS19TB18 Self-Contained Glider Kit Aluminum flatbed, aluminum compartments, 300 gal Tank 200gpm pump, hose reel with hose.

FS19TB19 Self-Contained Glider Kit Aluminum flat bed, aluminum compartments, 300 gal Tank, 200gpm pump, hose reel with hose.

FS19TB20 Self-Contained Glider Kit Aluminum flatbed, Aluminum compartments, 300 gal Tank 200gpm pump, hose reel with hose.

FS19TB21 Brush fire appparatus Freightliner M2-106 4WD standard cab with aluminum flatbed, aluminum compartments, 800 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB22 Brush fire appparatus Freightliner M2-106 4WD EXTENDED cab with aluminum flatbed, aluminum compartments, 800 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB23 Brush fire appparatus Freightliner M2-106 4WD CREW CAB with aluminum flatbed, aluminum compartments, 800 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB24 Brush fire appparatus Freightliner SD-108 4WD STANDARD CAB with aluminum flatbed, aluminum compartments, 800 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB25 Brush fire appparatus Freightliner SD-108 4WD CREW CAB with aluminum flatbed, aluminum compartments, 800 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB26 Water Tender Freightliner SD-108 4WD STANDARD CAB with aluminum flatbed, aluminum compartments, 1600 gallon tank, Diesel 300 gpm pump. Emergency lighting packag.

FS19TB27 Freightliner, 2- door chassis, Tanker, tandem axile, 1000 GPM PTO pump, 4000 gal poly tank and body, stainless pumb,swivel dump, LED LIGHTS.

FS19TB28 Freightliner, 2 - door chassis, Tanker tandem axle, 750 GPM PTO Pump, 3000, gal poly tank and body,stainess plumb, swivel dump, LED LIGHTS
FS19TB29 Freightliner, 2 - door chassis, Tanker single axle, 750 GPM PTO Pump, 2000, gal poly tank and body,stainess plumb, swivel dump, LED LIGHTS
FS19UF01
Oshkosh Striker 4x4, 2-Door, Aluminum Cab, 2 Passenger Seating, Roof Turret (375/750 gpm), bumper Turret (300 gpm), One Handline (Foam/Water), Water Tank Capacity (1500 gal.), Foam Tank Capacity (210 gal.), Fire Pump (Power divider driven Waterous CRQB, Single Stage Centrifugal, 1950 gpm at 250 psi)
U. OshKosh
F. Airport Rescue Fire-Fighting Vehicles

Page 24 of 47 ends

FS19UF02
Oshkosh Striker 6x6, 2-Door, Aluminum Cab, 2 Passenger Seating, Roof Turret (600/1200 gpm), bumper Turret (300 gpm), One Handline (Foam/Water), Water Tank Capacity (3000 gal.), Foam Tank Capacity (420 gal.), Fire Pump (Power divider driven Waterous CRQB, Single Stage Centrifugal, 1950 gpm at 250 psi)
FS19UF03
Oshkosh Striker 8x8, 2-Door, Aluminum Cab, 2 Passenger Seating, Roof Turret (600/1200 gpm), bumper Turret (300 gpm), One Handline (Foam/Water), Water Tank Capacity (4500 gal.), Foam Tank Capacity (420 gal.), Fire Pump (Power divider driven Waterous CRQA, Single Stage Centrifugal, 1950 gpm at 240 psi)
FS19UF04
Oshkosh New Generation Striker 8x8, 2-Door, Aluminum Cab, 2 Passenger Seating, Roof Turret (600/1200 gpm), bumper Turret (300 gpm), One Handline (Foam/Water), Water Tank Capacity (4500 gal.), Foam Tank Capacity (420 gal.), Fire Pump (Waterous CRQB, Single Stage Centrifugal, 1950 gpm at 250 psi), dual engine driveline FS19UF05
Oshkosh Stinger Class 2 ARFF vehicle; 2-Door Ford 4x4 F550 Cab/chassis, 2 Passenger Seating, Bumper Turret, one (1) twin agent handline, Water Tank Capacity (300 gal.), Foam Tank Capacity (40 gal.), Dry Chemical 500 pounds.

FS19UF06 Oshkosh H-Series Chassis; 2-Door, Aluminum Cab, 2 Passenger Seating, 50,000 GVWR, Single Axle
FS19UF07 Oshkosh HT-Series Chassis; 2-Door, Aluminum Cab, 2 Passenger Seating, 55,000 GVWR, Single Axle
FS19UF08 Oshkosh P-Series Chassis; 2-Door, Aluminum Cab, 2 Passenger Seating, 51,000 GVWR, Single Axle
FS19VA01 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 75' Steal Rear-Mounted Telescoping Ladder (500#) FS19VA02 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 75' Steal Rear-Mounted Telescoping Ladder (500#) FS19VA03 Pierce Enforcer Chassis 4-Door 75' Aluminum Rear Mounted Telescoping Ladder, Formed Aluminum Body
FS19VA04 Pierce Arrow Chassis 4-Door 100' Aluminum Rear Mount Aerial, Aluminum Body, Tandem Axle
FS19VA05 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 107' Rear-Mounted Telescoping Ladder
FS19VA06 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Rear Axle, 107' Rear-Mounted Telescoping Ladder
FS19VA07 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Rear Axle, 110' Rear-Mounted Telescoping Platform FS19VA08 Pierce Enforcer Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 105' Rear-Mounted Telescoping Ladder (500#) FS19VA09 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 100' Mid-Mounted Telescoping Ladder with Platform FS19VA10 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Tandem Axle, 100' Rear-Mounted Telescoping Ladder with Platform (750#) FS19VA11 Pierce Arrow Chassis, 4-Door Full Tilt Aluminum Cab, Formed Aluminum Body, Single Axle, 107' Tractor Drawn - Mid-Mounted Telescoping Ladder (#500) V. Pierce
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) B. Wildland Fire Apparatus (Brush Fire)

Page 25 of 47 ends

FS19VB01 Pierce Brush Fire Apparatus, Ford F450, Formed Aluminum Utility Body FS19VB02 Pierce Brush Fire Apparatus, Ford F-550 Mini Pumper 500 gpm, 300 tank FS19VB03 Freightliner 4-Door 4 x 4 Wildland, 500 water, 1000 gpm Pump FS19VC01 M2 Freightliner, 2-Door, OEM Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19VC02 IHC, 2-Door, OEM Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper
FS19VC03 KW, 2-Door, OME Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper
FS19VC04 Peterbilt, 2-Door, OME Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid- Mounted Pumper
FS19VC05 Pierce Saber 4- Door Full Tilt Aluminum Cab, Ford Engine, Aluminum Body, 1250 gpm, mid-mounted Pump
FS19VC06 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19VC07 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, Mid-Mounted Pumper
FS19VC08 Pierce Velocity, 4- Door Fulll Tilt Cab, Aluminum Long Body, 1250 gpm mid- mounted Pump
FS19VC09 Pierce Dash CF, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1250 GPM Pump, PUC Body Pumper
FS19VD01 Ford F-550 4- Door, 12 'Non-Walk-in Formed Aluminum Body FS19VD02 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non- Walk-In Body
FS19VD03 IHC, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body FS19VD04 Kenworth, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body
FS19VD05 Peterbilt, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Body
FS19VD06 Pierce Saber FR, Full-Tilt, Aluminum Cab, Single Axle, Formed Aluminum Body, Non-Walk-In Encore Body 18.5'
FS19VD07 Pierce Enforcer 4-Door, Aluminum Cab, Single Axle, Formed Aluminum Body, Non Walk-in HDR Body
FS19VD08 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Non-Walk-in HDR Body FS19VD09 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body
FS19VD10 IHC, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body FS19VD11 Kenworth, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body FS19VD12 Peterbilt, 2-Door, OEM Cab, Single Axle, Formed Aluminum Body, Walk-In Body FS19VD13 Pierce Enforcer 4-Door, Full Tilt, Aluminum Cab, Single Axle, Formed Aluminum Body, Walk-in HDR Body
FS19VD14 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Walk-in HDR Body FS19VD15 Pierce Velocity 2-Door, Aluminum Cab, Tandem Axle, Combination Formed Aluminum Body
FS19VD16 Pierce Velocity 4-Door Aluminum Cab, Tandem Axle Walk-in Communications Body
C. Pumper Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center

Page 26 of 47 ends

FS19VE01 Freightliner 2 Door, Single Axle Tanker, Aluminum Body w/2000 water & 500 pump FS19VE02 IHC 2dr Single Axle Tanker, Aluminum Body w/2000 water & 500 pump FS19VE03 Kenworth 2dr Single Axle Tanker, Aluminum Body w/2000 water & 500 pump FS19VE04 Peterbilt 2dr Single Axle Tanker, Aluminum w/2000 water & 500 pump FS19VE05 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Pumper/Tanker, Aluminum Body, Single Axle, 1000 GPM Pump, Mid-Mounted
FS19VE06 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Pumper/Tanker, Aluminum Body, Tandem Axle, 1000 GPM Pump, Mid-Mounted
FS19VE07 Freightliner 2dr, Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump FS19VE08 IHC 2dr Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump FS19VE09 Kenworth 2dr Tandem Axle Tanker, Aluminum Body w/3000 water & 500 pump FS19VE10 Peterbilt 2dr Tandem Axle Tanker, Aluminum w/3000 water & 500 pump FS19VE11 Pierce Saber FR, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Single Axle, 1000 GPM Pump, Mid-Mounted Elliptical Tanker
FS19VE12 Pierce Enforcer, 4-Door, Full-Tilt, Aluminum Cab, Aluminum Body, Tandem Axle, 1000 GPM Pump, Mid-Mounted Elliptical Tanker
FS19VE13 Pierce Velocity, 4-Door Aluminum Cab, Tandem Axle, Aluminum Pumper/Tanker 2000 Gallon Body, 1500 GPM Pump
FS19WA01 Precision, Single Axle, Spartan Chassis, 75' Rear Mount Aerial, Welded Extruded Aluminum Body, 300 Gallon Tank, 1,500 GPM Single Stage Pump FS19WA02 Precision, Tandem Axle, Spartan Chassis, 110' Rear Mount Aerial, Welded Extruded Aluminum Body, 300 Gallon Tank, 1,500 GPM Single Stage Pump FS19WA03 Precision, Tamdem Axle, Spartan Chassis, 110' Rear Mount Platform, Welded Extruded Aluminum Body, 300 Gallon Tank, 1,500 GPM Single Stage Pump FS19WA04 Precision, Tamdem Axle, Spartan Chassis, 100' Mid- Mount Platform, Welded Extruded Aluminum Body, 300 Gallon Tank, 1,500 GPM Single Stage Pump FS19WA05 Precision , Spartan Chassis, 55' Snorkel Rear Mount Articulating Boom Platform, Welded Extruded Aluminum Body, Single Axle
FS19WB01 Precision, Dodge 5500 4x4, Quick Attack Pumper, 500 GPM, Welded Extruded Aluminum Body, 250 Gallon Tank
FS19WB02 Precision, Dodge 5500 4x4, Quick Attack Pumper, 500 GPM, Welded Extruded Aluminum Body, 250 Gallon Tank
FS19WC01 International 4400, 2-Door Cab, Pumper, Welded Extr uded Aluminum Body, 750 Gallon Tank, 1,250 GPM Single Stage Pump
FS19WC02 Freightliner M2, 2-Door Cab, Pumper, Welded Extruded Aluminum Body, 750 Gallon Tank, 1,250 GPM Single Stage Pump
FS19WC03 Kenworth, 2-Door Cab, Pumper, Welded Extruded Aluminum Body, 750 Gallon Tank, 1,250 GPM Single Stage Pump
FS19WC04 Precision, Spartan Chassis, 4-Door Custom Full Tilt Aluminum Cab, Pumper, Welded Extruded Aluminum Body, 1,250 GPM Single Stage Pump, 750 Gallon Tank FS19WC05 Precision, Spartan Chassis, 4-Door Custom Full Tilt Aluminum Cab, CAFS Pumper, Welded Extruded Aluminum Body, 1,500 GPM Single Stage Pump, 750 Gallon Tank W. Precision Fire Apparatus
E. Pumper/Tankers & Tankers
B. Wildland Fire Apparatus (Brush Fire)
C. Pumper Fire Apparatus
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms)

Page 27 of 47 ends

FS19WC06 Ford F550 Severe Duty 4x4, 4-Door, Rear Mount Pumper, 300 Gallon Tank, 1,250 GPM Single Stage Pump, 22,500 GVWR
FS19WD01 International 4400, 2-Door Cab, Welded Extruded Aluminum Body, Rescue Body FS19WD02 Freightliner M2, 2-Door Cab, Welded Extruded Aluminum Body, Rescue Body FS19WD03 Kenworth, 2-Door Cab, Welded Extruded Aluminum Body, Rescue FS19WD04 Precision, Spartan Chassis, 4-Door Custom Full Tilt Aluminum Cab, Welded Extruded Aluminum Body, Rescue Body
FS19WE01 International 4400, 2-Door Cab, Pumper/Tanker, Weld ed Extruded Aluminum Body, 2,000 Gallon Tank, 750 GPM Single Stage Pump
FS19WE02 Freightliner M2, 2-Door Cab, Pumper/Tanker, Welded Extruded Aluminum Body, 2,000 Gallon Tank, 750 GPM Single Stage Pump
FS19WE03 Kenworth, 2-Door Cab, Pumper/Tanker, Welded Extruded Aluminum Body, 2000 Gallon Tank, 750 GPM Single Stage Pump
FS19WE04 Precision, Spartan Chassis, 4-Door Custom Full Tilt Aluminum Cab, Pumper/Tanker, Welded Extruded Aluminum Body, 750 GPM Single Stage Pump, 2,500 Gallon Tank FS19XF01
Rosenbauer Panther 1500, 2-Door, Aluminum Cab, High Performance Off Road suspension, 3 Passenger Seating, Roof Turret (375/750 gpm), bumper Turret (300 gpm), One (1) left side pre- connected Handline (Foam/Water) one (1) right side twin agent handline, Water Tank Capacity (1600 gal.), Foam Tank Capacity (200 gal.), Dry Chemical 500 pounds, Fire Pump (Power divider driven Rosenbauer N80, Dual Stage Centrifugal high pressure, 2100 gpm) FS19XF02
Rosenbauer Panther 3000, 2-Door, Aluminum Cab, High Performance Off Road suspension, 3 Passenger Seating, Roof Turret (600/1200 gpm), bumper Turret (300 gpm), One (1) left side pre- connected Handline (Foam/Water) one (1) right side twin agent handline, Water Tank Capacity (3170 gal.), Foam Tank Capacity (400 gal.),Dry Chemical 500 pounds, Fire Pump (Power divider driven Rosenbauer N80, Dual Stage Centrifugal high pressure, 2100 gpm) FS19XF03
Rosenbauer Panther 3000 with HRET, 2-Door, Aluminum Cab, High Performance Off Road suspension, 2 Passenger Seating, 1000 gpm High Reach Extendable turret (500/1000 gpm), bumper Turret (300 gpm), One (1) left side pre-connected Handline (Foam/Water) one (1) right side twin agent handline, Water Tank Capacity (3000 gal.), Foam Tank Capacity (400 gal.),Dry Chemical 500 pounds, Fire Pump (Power divider driven Rosenbauer N80, Dual Stage Centrifugal high pressure, 2100 gpm)
FS19XF04
Rosenbauer Airwolf C2 2-Door Ford 4x4 F550 Cab/chassis, 2 Passenger Seating, bumper Turret, one (1) twin agent handline, Water Tank Capacity (300 gal.), Foam Tank Capacity (40 gal.), Dry Chemical 500 pounds, Fire Pump 300 gpm
FS19XF05
Rosenbauer Airwolf C3 2-Door International 7400 4x4 Cab/chassis, 2 Passenger Seating, bumper Turret, one (1) twin agent handline, Water Tank Capacity (500 gal.), Foam Tank Capacity (60 gal.), Dry Chemical 500 pounds, Fire Pump 300 gpm
FS19YA01 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 78' Rear Mount Steel Ladder
FS19YA02 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 78' Rear Mount Steel Ladder
FS19YA03 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 100' Rear Mount Steel Ladder
FS19YA04 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 109' Rear- Mount Steel Ladder
FS19YA05 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 100' Mid- Mount Steel Ladder
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) X. Rosenbauer
E. Pumper/Tankers & Tankers
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile F. Airport Rescue Fire-Fighting Vehicles
Y. Rosenbauer Minnesota LLC

Page 28 of 47 ends

FS19YA06 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 101' Rear Mount Steel Platform
FS19YA07 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 104' Rear Mount Steel Platform
FS19YA08 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 100' Mid Mount Steel Platform
FS19YA09 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 100' Tractor Drawn Steel Ladder
FS19YA10 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 65' Rear Mount Steel Ladder
FS19YA11 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 51' Rear Mount Boom
FS19YA12 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 68' Rear Mount Boom
FS19YA13 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 102' Raptor Rear Mount Ladder
FS19YA14 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 114' Articulating-Telescoping T-REX Platform
FS19YA15 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Tandem Axle, 100' Rear Mount KING COBRA Steel Platform,
FS19YA16 Rosenbauer Commander, 4-Door Tilt Cab, Extruded Aluminum Body, Single Axle, 75' Mid Mount Steel Ladder
FS19YB01 IH HV507, 4x4, 2-Door, OEM Timberwolf, Pumper, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Rear Mount
FS19YC01 M2 Freightliner, 2-Door, OEM, Pumper, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side-Mounted Pumper
FS19YC02 IH MV607, 2-Door, OEM, Pumper, Extruded Aluminum Bo dy, Single Axle, 1250 GPM Pump, Side- Mounted Pumper
FS19YC03 Kenworth, 2-Door, OEM, Pumper, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side- Mounted Pumper
FS19YC04 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Pumper, Extruded Aluminum Body, Single Axle, 1250 GPM Pump, Side-Mounted Pumper
FS19YC05 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Pumper, Extruded Aluminum Body, Single Axle, 1500 GPM Pump, Side-Mounted Pumper
FS19YC06 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Pumper, Extruded Aluminum Body, Single Axle, 1500 GPM Pump, Rear-Mounted Pumper
FS19YC07 Ford F550, 4x2, 2-Door OEM Cab, Mini Pumper, Formed Aluminum Body, 500 GPM PTO Pump, Side Mounted
FS19YD01 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Extruded Aluminum Body, Non-Walk-In Body FS19YD02 IH MV607, 2-Door, OEM Cab, Single Axle, Extruded Al uminum Body, Non-Walk-In Body FS19YD03 M2 Freightliner, 2-Door, OEM Cab, Tandem Axle, Extruded Aluminum Body, Non-Walk-In Body FS19YD04 Ford F-550, 2-Door, OEM Ccab, Single Axle, Extrude d Aluminum Body, Non-Walk-In Body FS19YD05 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Cab, Single Axle, Extruded Aluminum Body, Non-Walk-In Body
FS19YD06 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Cab, Tandem Axle, Extruded Aluminum Body, Non-Walk-In Body
FS19YD07 M2 Freightliner, 2-Door, OEM Cab, Single Axle, Extruded Aluminum Body, Walk-In Body FS19YD08 IH MV607, 2-Door, OEM Cab, Single Axle, Extruded Al uminum Body, Walk-In Body FS19YD09 M2 Freightliner, 2-Door, OEM Cab, Tandem Axle, Extruded Aluminum Body, Walk-In Body C. Pumper Fire Apparatus
B. Wildland Fire Apparatus
D. Special Service Apparatus (Walk-In & Non-Walk-in Bodies) Multi-use: Rescue, Re-Hab, Hazmat, Mobile Command Center

Page 29 of 47 ends

FS19YD10 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Cab, Single Axle, Extruded Aluminum Body, Walk-In Body
FS19YD11 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Cab, Tandem Axle, Extruded Aluminum Body, Walk-In Body
FS19YE01 M2 Freightliner, 2-Door, OEM Cab, Pumper/Tanker, Extruded Aluminum Body, 1800 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted
FS19YE02 IH MV607, 2-Door, OEM Cab, Pumper/Tanker, Extruded Aluminum Body, 1800 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted
FS19YE03 M2 Freightliner, 2-Door, OEM Cab, Pumper/Tanker, Extruded Aluminum Body, 2000 Gallon Tank, Tandem Axle, 1250 GPM Pump, Mid-Mounted
FS19YE04 Rosenbauer Commander, 4-Door Full-Tilt, Aluminum Cab, Pumper/Tanker, Extruded Aluminum Body, 1800 Gallon Tank, Single Axle, 1250 GPM Pump, Mid-Mounted FS19YE05 Rosenbaue Commander, 4-Door Full-Tilt, Aluminum Cab, Pumper/Tanker, Extruded Aluminum Body, 2000 Gallon Tank, Tandem Axle, 1250 GPM Pump, Mid-Mounted FS19ZA01 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Single Axle, 78' Rear Mount Steel Ladder
FS19ZA02 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 78' Rear Mount Steel Ladder
FS19ZA03 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 100' Rear Mount Steel Ladder
FS19ZA04 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 109' Rear Mount Steel Ladder
FS19ZA05 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 100' Mid-Mount Steel Ladder
FS19ZA06 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 101' Rear Mount Steel Platform
FS19ZA07 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 104' Rear Mount Steel Platform
FS19ZA08 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 100' Mid-Mount Steel Platform
FS19ZA09 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Single Axle, 65' Rear Mount Steel Ladder
FS19ZA10 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Single Axle, 51' Rear Mount Boom
FS19ZA11 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Single Axle, 68' Rear Mount Boom
FS19ZA12 Rosenbauer Commander 4-Door Tilt Cab, Formed Aluminum Body, Single Axle 75'Mid Mount Steel Ladder
FS19ZA13 Rosenbauer Commander 4-door Tilt Cab, Formed Aluminum Body, Single Axle, 75' Mid Mount Steel Platform
FS19ZA14 M2 Freightliner, 2-Door OEM Cab, Formed Aluminum Body, Single Axle, 51' Rear Mount Boom FS19ZA15 Rosenbauer Commander, 4-Door Tilt Cab, Formed Aluminum Body, Single Axle, 100' Rear Mount Steel Ladder
FS19ZA16 Rosenbauer Commander, 4-Door Tilt Cab, Formed Aluminum Body, Tandem Axle, 100' Rear Mount KING COBRA Steel Platform,
FS19ZB01 M2 Freightliner, 4x4, 2-Door OEM Cab, WILDLAND Pumper, FX Formed Aluminum Body, Single Axle, 1000 GPM Pump, Side Mounted
FS19ZB02 M2 Freightliner, 4x4, 2-Door OEM Cab, WILDLAND CT Pumper, Formed Stainless Steel Body, Single Axle, 1000 GPM Pump, Rear Mounted
FS19ZB03 IH MV607, 4x4, 2-Door OEM Cab, WILDLAND Pumper, FX Formed Aluminum Body, Single Axle, 1000 GPM Pump, Side Mounted
FS19ZB04 IH MV607, 4x4, 2-Door OEM Cab, WILDLAND CT Pumper, Formed Stainless Steel Body, Single Axle, 1000 GPM Pump, Rear Mounted
E. Pumper/Tankers & Tankers
Z. Rosenbauer South Dakota LLC
A. Aerials (Booms/Platforms, Ladders, Ladder/Platfo rms) B. Wildland Fire Apparatus

Page 30 of 47 ends

Sacramento City CouncilJune 21, 2022

Sacramento City Council
June 21, 2022