Cities Index.
09_Riverview Marketplace Commercial Project_DEIR.pdf

Bakersfield City Council
November 4, 2026

Document
09_Riverview Marketplace Commercial Project_DEIR.pdf
Meeting
November 4, 2026
Body
Bakersfield City Council
Pages
223
Original file
283.1 MB
Text extracted from the city's file for reading and search. Open the original on pub-bakersfield.escribemeetings.com. That file is the official record.

Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Ashley Knight, Assistant Planner
November 26, 2025

Page 10 ends

Editorial Comments and/or Suggestions
Nesting birds: CDFW encourages that Project ground-disturbing activities occur during the bird non-nesting season; however, if ground-disturbing or vegetation-disturbing activities must occur during the nesting season (February 1st through September 15th), the Project applicant is responsible for ensuring that implementation of the Project does not result in violation of the Migratory Bird Treaty Act or relevant Fish and Game Code sections as referenced above.

CDFW further recommends that a qualified biologist conduct a pre-construction survey for active nests no more than 10 days prior to the start of ground or vegetation disturbance to maximize the probability that nests that could potentially be impacted are detected. CDFW also recommends that surveys cover a sufficient area around the Project site to identify nests and determine their status. A sufficient area means any area potentially affected, either directly or indirectly, by the Project. In addition to direct impacts (i.e., nest destruction), noise, vibration, and movement of workers or equipment could also affect nests. CDFW recommends that a qualified biologist establish a behavioral baseline of all identified nests. Once Project activities begin, CDFW recommends having a qualified biologist continuously monitor nests to detect behavioral changes resulting from the Project. If behavioral changes occur, CDFW recommends halting the work causing that change and consulting with CDFW for additional avoidance and minimization measures.

If continuous monitoring of identified nests by a qualified biologist is not feasible, COFW recommends a minimum no-disturbance buffer of 250 feet around active nests of non-listed bird species and a 500-foot no-disturbance buffer around active nests of non-listed raptors. These buffers are advised to remain in place until the breeding season has ended or until a qualified biologist has determined the birds have fledged and are no longer reliant upon the nest or on-site parental care for survival. Variance from these no-disturbance buffers is possible when there is a compelling biological or ecological reason to do so, such as when the Project site would be concealed from a nest site by topography. CDFW recommends that a qualified biologist advise and support any variance from these buffers and notify CDFW in advance of implementing a variance.

Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2

ENVIRONMENTAL DATA

FILING FEES
Project Alternative Analysis: CDFW recommends that the information and results obtained from the biological technical surveys, studies, and analysis conducted in support of the Project’s CEQA document be used to develop and modify the Project’s alternatives to avoid and minimize impacts to biological resources to the maximum extent possible. When efforts to avoid and minimize have been exhausted, remaining impacts to sensitive biological resources should be mitigated to reduce impacts to a less than significant level, if feasible.

The Project, as proposed, could have an impacton biological resources, and an assessment of filing fees is necessary. Fees are payable upon filing of the Notice of Determination by the Lead Agency and serve to help defray the cost of environmental review by CDFW. Payment of the fee is required in order for the underlying project approval to be operative, vested, and final (Cal. Code Regs, tit. 14, § 753.5; Fish & G.

Code, § 711.4; Pub. Resources Code, § 21089).

CEQA requires that information developed in environmental impact reports and negative declarations be incorporated into a database, which may be used to make subsequent or supplemental environmental determinations (Pub. Resources Code, § 21003, subd. (e)). Accordingly, please report any special-status species and natural communities detected during Project surveys to the CNDDB. The CNDDB field survey form can be found at the following link:
https://www.wildlife.ca.gov/Data/CNDDB/Submitting-Data. The completed form can be mailed electronically to the CNDDB at the following email address:

[email protected]. The types of information reported to the CNDDB can be found at the following link: https://www.wildlife.ca.gov/Data/CNDDB/Plants-and-Animals.

CNDDB: Please note that the CNDDB is populated by records through voluntary submissions of species detections. As a result, species may be present in locations not depicted in the CNDDB but where there is suitable habitat and features capable of supporting species. A lack of an occurrence record in the CNDDB does not mean a species is not present. In order to adequately assess any potential Project related impacts to biological resources, surveys conducted by a qualified biologist during the appropriate survey period(s) and using the appropriate protocol survey methodology are warranted in order to determine whether or not any special-status species are present at or near the Project site.

Ashley Knight, Assistant Planner
November 26, 2025

Page 11 ends

Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Ashley Knight, Assistant Planner
November 26, 2025

Page 11 ends

Project Alternative Analysis: CDFW recommends that the information and results obtained from the biological technical surveys, studies, and analysis conducted in support of the Project's CEQA document be used to develop and modify the Project's alternatives to avoid and minimize impacts to biological resources to the maximum extent possible. When efforts to avoid and minimize have been exhausted, remaining impacts to sensitive biological resources should be mitigated to reduce impacts to a less than significant level, if feasible.

CNDDB: Please note that the CNDDB is populated by records through voluntary submissions of species detections. As a result, species may be present in locations not depicted in the CNDDB but where there is suitable habitat and features capable of supporting species. A lack of an occurrence record in the CNDDB does not mean a species is not present. In order to adequately assess any potential Project related impacts to biological resources, surveys conducted by a qualified biologist during the appropriate survey period(s) and using the appropriate protocol survey methodology are warranted in order to determine whether or not any special-status species are present at or near the Project site.

ENVIRONMENTAL DATA
CEQA requires that information developed in environmental impact reports and negative declarations be incorporated into a database, which may be used to make subsequent or supplemental environmental determinations (Pub. Resources Code, § 21003, subd. (e)). Accordingly, please report any special-status species and natural communities detected during Project surveys to the CNDDB. The CNDDB field survey form can be found at the following link:
https://www.wildlife.ca.gov/Data/CNDDB/Submitting-Data. The completed form can be mailed electronically to the CNDDB at the following email address:

[email protected]. The types of information reported to the CNDDB can be found at the following link: https://www.wildlife.ca.gov/Data/CNDDB/Plants-and-Animals.

FILING FEES
The Project, as proposed, could have an impact on biological resources, and an assessment of filing fees is necessary. Fees are payable upon filing of the Notice of Determination by the Lead Agency and serve to help defray the cost of environmental review by CDFW. Payment of the fee is required in order for the underlying project approval to be operative, vested, and final (Cal. Code Regs, tit. 14, § 753.5; Fish & G.

Code, § 711.4; Pub. Resources Code, § 21089).

Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2

CONCLUSION
ATTACHMENT 1: Mitigation Monitoring and Reporting Program ec:

More information on survey and monitoring protocols for sensitive species can be found at CDFW’s website (https://www.wildlife.ca.gov/Conservation/Survey-Protocols). If you have any questions regarding this letter or further coordination, please contact Marile Colindres, Environmental Scientist, at the address provided on this letterhead, by telephone at (559) 974-3452, or by electronic mail at [email protected].

CDFW appreciates the opportunity to comment on the NOP to assist the City of Bakersfield in identifying and mitigating Project impacts on biological resources. A Mitigation Monitoring and Reporting Program (Attachment 1) is included below to assist the City of Bakersfield with incorporating the recommended mitigation measures provided above.

State Clearinghouse
Governor’s Office of Land Use and Climate Innovation
[email protected]
v
------ FA83F09FE08945A...

Julie A. Vance
Regional Manager
Ashley Knight, Assistant Planner
November 26, 2025

Page 12 ends

Sincerely,
A-----DocuSigned by:

P4. JAnes
Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Ashley Knight, Assistant Planner
November 26, 2025

Page 12 ends

CONCLUSION
CDFW appreciates the opportunity to comment on the NOP to assist the City of Bakersfield in identifying and mitigating Project impacts on biological resources. A Mitigation Monitoring and Reporting Program (Attachment 1) is included below to assist the City of Bakersfield with incorporating the recommended mitigation measures provided above.

More information on survey and monitoring protocols for sensitive species can be found at CDFW’s website (https://www.wildlife.ca.gov/Conservation/Survey-Protocols). If you have any questions regarding this letter or further coordination, please contact Marile Colindres, Environmental Scientist, at the address provided on this letterhead, by telephone at (559) 974-3452, or by electronic mail at [email protected].

Sincerely,
DocuSigned by:

Olen vine
FA83F09FEQ8945A...

Julie A. Vance
Regional Manager
ATTACHMENT 1: Mitigation Monitoring and Reporting Program ec: State Clearinghouse
Governor's Office of Land Use and Climate Innovation
[email protected]
Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2

REFERENCES
Ashley Knight, Assistant Planner
November 26, 2025

Page 13 ends

California Department of Fish and Wildlife. 2025. Biogeographic information and observation system (BIOS). https://wildlife.ca.gov/Data/BIOS. Accessed 13 November 2025.

California Department of Fish and Wildlife. 2016. Five-year status review for Swainson’s Hawk (Buteo swainsoni). California Department of Fish and Wildlife, Sacramento, California, USA.

California Department of Fish and Wildlife. 2023. Survey considerations for California Endangered Species Act candidate bumble bee species. California Department of Fish and Wildlife, Sacramento, California, USA.

Cypher, B., S. Phillips, and P. Kelly. 2013. Quantity and distribution of suitable habitat for endangered San Joaquin kit foxes: conservation implications. Canid Biology and Conservation 16(7): 25-31.

United States Fish and Wildlife Service. 2011. Standard Recommendations for the Protection of the San Joaquin Kit Fox Prior to or During Ground Disturbance.

U.S. Fish and Wildlife Service, Sacramento, California.

California Department of Fish and Game. 1994. Staff report regarding mitigation for impacts to Swainson’s hawks (Buteo Swainsoni) in the Central Valley of California. California Department of Fish and Game, Sacramento, California, USA.

Swainson’s Hawk Technical Advisory Committee. 2000. Recommended timing and methodology for Swainson’s hawk nesting surveys in California’s Central Valley.

Swainson’s Hawk Technical Advisory Committee.

Cypher B., E. Noel, E. Kelly, T. Westall, N. Deatherage, and A. Gabaldon. 2023.

Response of San Joaquin kit foxes to road construction sites. California State University-Stanislaus - Endangered Species Recovery Program, Turlock, California, USA.

California Department of Fish and Game. 2012. Staff report on burrowing owl mitigation.

California Department of Fish and Game, Sacramento, California, USA.

Estep, James A. 1989. Biology, movements, and habitat relationships of the Swainson’s hawk in the Central Valley of California 1986-1987. State of California, The Resources Agency, Department of Fish and Game, Wildlife Management Division.

Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Ashley Knight, Assistant Planner
November 26, 2025

Page 13 ends

REFERENCES
California Department of Fish and Game. 1994. Staff report regarding mitigation for impacts to Swainson’s hawks (Buteo Swainson) in the Central Valley of California. California Department of Fish and Game, Sacramento, California, USA.

California Department of Fish and Game. 2012. Staff report on burrowing owl mitigation.

California Department of Fish and Game, Sacramento, California, USA.

California Department of Fish and Wildlife. 2016. Five-year status review for Swainson’s Hawk (Buteo swainsoni). California Department of Fish and Wildlife, Sacramento, California, USA.

California Department of Fish and Wildlife. 2023. Survey considerations for California Endangered Species Act candidate bumble bee species. California Department of Fish and Wildlife, Sacramento, California, USA.

California Department of Fish and Wildlife. 2025. Biogeographic information and observation system (BIOS). https://wildlife.ca.gov/Data/BIOS. Accessed 13 November 2025.

Cypher, B., S. Phillips, and P. Kelly. 2013. Quantity and distribution of suitable habitat for endangered San Joaquin kit foxes: conservation implications. Canid Biology and Conservation 16(7): 25-31.

Cypher B., E. Noel, E. Kelly, T. Westall, N. Deatherage, and A. Gabaldon. 2023.

Response of San Joaquin kit foxes to road construction sites. California State University-Stanislaus — Endangered Species Recovery Program, Turlock, California, USA.

Estep, James A. 1989. Biology, movements, and habitat relationships of the Swainson’s hawk in the Central Valley of California 1986-1987. State of California, The Resources Agency, Department of Fish and Game, Wildlife Management Division.

Swainson’s Hawk Technical Advisory Committee. 2000. Recommended timing and methodology for Swainson’s hawk nesting surveys in California's Central Valley.

Swainson’s Hawk Technical Advisory Committee.

United States Fish and Wildlife Service. 2011. Standard Recommendations for the Protection of the San Joaquin Kit Fox Prior to or During Ground Disturbance.

U.S. Fish and Wildlife Service, Sacramento, California.

Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2 Attachment 1
Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Attachment 1
Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2 Attachment 1
San Joaquin Kit Fox (SJKF)
Swainson’s Hawk (SWHA)
Western Burrowing Owl (BUOW)
Crotch’s Bumble Bee (CBB)
State Species of Special Concern
Recommended Mitigation Measure 4:

SWHA Surveys Prior to Construction
Recommended Mitigation Measure 7:

SWHA Foraging Habitat Mitigation
Recommended Mitigation Measure 8:

BUOW Preconstruction Surveys
Recommended Mitigation Measure 10:

BUOW Take Authorization
Recommended Mitigation Measure 6:

SWHA Take Authorization
Recommended Mitigation Measure 13:

CBB Take Authorization
Recommended Mitigation Measure 11:

CBB Surveys
Recommended Mitigation Measure 1:

SJKF preconstruction surveys_______
Recommended Mitigation Measure 3:

SJKF Take Authorization

CALIFORNIA DEPARTMENT OF FISH AND WILDLIFE

RECOMMENDED MITIGATION MONITORING AND REPORTING PROGRAM (MMRP)
PROJECT: Riverview Market Commercial Project (Project)
Notice of Preparation (NOP)
SCH No.: 2025101507

RECOMMENDED MITIGATION MEASURE STATUS/DATE/INITIALS
Before Disturbing Soil or Vegetation
Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Attachment 1

CALIFORNIA DEPARTMENT OF FISH AND WILDLIFE

RECOMMENDED MITIGATION MONITORING AND REPORTING PROGRAM (MMRP)
PROJECT: Riverview Market Commercial Project (Project)
Notice of Preparation (NOP)
SCH No.: 2025101507
RECOMMENDED MITIGATION MEASURE | STATUS/DATEI/INITIALS
Before Disturbing Soil or Vegetation
San Joaquin Kit Fox (SJKF)
Recommended Mitigation Measure 1:

SJKF preconstruction surveys
Recommended Mitigation Measure 3:

SJKF Take Authorization
Swainson’s Hawk (SWHA)
Recommended Mitigation Measure 4:

SWHA Surveys Prior to Construction
Recommended Mitigation Measure 6:

SWHA Take Authorization
Recommended Mitigation Measure 7:

SWHA Foraging Habitat Mitigation
Western Burrowing Owl (BUOW)
Recommended Mitigation Measure 8:

BUOW Preconstruction Surveys
Recommended Mitigation Measure 10:

BUOW Take Authorization
Crotch’s Bumble Bee (CBB)
Recommended Mitigation Measure 11:

CBB Surveys
Recommended Mitigation Measure 13:

CBB Take Authorization
State Species of Special Concern
Docusign Envelope ID: FEE0AC31-88AB-4B90-9B0C-87C4623472B2 During Construction
San Joaquin Kit Fox (SJKF)
Recommended Mitigation Measure 2:

SJKF Avoidance Buffer
Crotch’s Bumble Bee (CBB)
Recommended Mitigation Measure 12:

CBB Avoidance
Western Burrowing Owl (BUOW)
Recommended Mitigation Measure 9:

BUOW Avoidance Buffer
State Species of Special Concern
Recommended Mitigation Measure 15:

Avoidance
Swainson’s Hawk (SWHA)
Recommended Mitigation Measure 5:

SWHA Avoidance Buffer
Recommended Mitigation Measure 14:

Surveys
Docusign Envelope ID: FEEOAC31-88AB-4B90-9B0C-87C4623472B2 Recommended Mitigation Measure 14:

Surveys
During Construction
San Joaquin Kit Fox (SJKF)
Recommended Mitigation Measure 2:

SJKF Avoidance Buffer
Swainson’s Hawk (SWHA)
Recommended Mitigation Measure 5:

SWHA Avoidance Buffer
Western Burrowing Owl (BUOW)
Recommended Mitigation Measure 9:

BUOW Avoidance Buffer
Crotch’s Bumble Bee (CBB)
Recommended Mitigation Measure 12:

CBB Avoidance
State Species of Special Concern
Recommended Mitigation Measure 15:

Avoidance
Yes, "blight" (often referred to as urban decay) is part of an Environmental Impac Report (EIR) study under the California Environmental Quality Act (CEQA). foreseeable indirect consequence of a proposed project.

Key Aspects of Blight in an EIR
opinions to determine if the impact is significant.

In essence, if there is a "fair argument" that a project may lead to physical blight, s must study and mitigate that potential effect.

While CEQA primarily focuses on physical environmental impacts, it mandates th; economic or social effects be considered if they would result in, or are caused b adverse physical impact on the environment. Urban decay or blight is considered potential physical environmental impact that must be analyzed if it is a reasonabl • Urban Decay Analysis: EIRs often contain a dedicated "Urban Decay" section t analyze these potential impacts, sometimes involving robust studies and expe From: James Davis <[email protected]>
Sent: Wednesday, December 10, 2025 2:06 PM
To: Ashley Knight <[email protected]>
Subject: RE: Scoping Meeting for Rosedale/Coffee
• Economic vs. Environmental Impact: A project's effect on property values or hi prices alone is generally an economic impact and not a physical environments under CEQA, unless it demonstrably leads to physical blight.

Hi Ashley, as a follow-up to the emai below, I have cut and pasted information on "blight" from the internet. Let me know if this will be part of the EIR. Thank you. • Causation Chain: An EIR must establish a clear chain of causation where the p economic or social change (e.g., a new large retail center causing nearby smal businesses to close) leads to a physical impact (e.g., long-term commercial va leading to building deterioration and vandalism).
• Physical Deterioration: The analysis focuses on whether a project would caust significant physical deterioration of properties or structures. e
0 0
From: James Davis <[email protected]>
Sent: Wednesday, December 10, 2025 2:06 PM
To: Ashley Knight <[email protected]>
Subject: RE:Scoping Meeting for Rosedale/Coffee
Hi Ashley, as a follow-up to the emai below, | have cut and pasted information on “blight” from the internet. Let me know if this will be part of the EIR. Thank you.

Yes,"blight"(often referredto as urbandecay)is partof anEnvironmentalImpac Report(EIR)study underthe CaliforniaEnvironmentalQualityAct(CEQA). # While CEQAprimarily focuses on physical environmental impacts, it mandates th:
economicor socialeffectsbe consideredif theywouldresult in, orarecausedbv adverse physical impact on the environment. Urban decay or blight is considered potential physical environmental impact that must be analyzed if it is a reasonabl foreseeable indirect consequence of a proposed project. # Key Aspects of Blight in an EIR
Physical Deterioration:The analysis focuses on whether a project would caus:
significant physical deterioration of properties or structures.

Causation Chain: An EIRmust establish a clear chain of causation where the p economic or social change (e.g., a new large retail center causing nearby smal businesses to close) leads to a physical impact (e.g., long-term commercial va leading to building deterioration and vandalism).

Economic vs.Environmental Impact: A project's effect on property values or hu prices alone is generally an economic impact and not a physical environmenia under CEQA,unless it demonstrably leads to physical blight.

Urban Decay Analysis:EIRsoften contain a dedicated "UrbanDecay” section t« analyze these potential impacts, sometimes involving robust studies and expe opinions to determine if the impact is significant. #
In essence,if there is a “fair argument” that a project may lead to physical blight,:
must study and mitigate that potential effect. #
Hi Ashley,
Thank you,
From: James Davis
Sent: Wednesday, December 10, 2025 1:40 PM
To: 'Ashley Knight' <[email protected]>
Subject: RE: Scoping Meeting for Rosedale/Coffee
I don't know if it's too late but I wanted to mention that part of the CEQA and EIR process might include a study on how the new future shopping center could cause blight in other shopping centers by taking away existing tenants. I don't know if that is something that is normally looked into or not.

Jim Davis
Vice President of Real Estate
Jaco Oil Company
0: 661-633-75661 M: 661-529-6793
3101 State Road | Bakersfield | CA 93308
[email protected]
From: James Davis
Sent: Wednesday, December 10, 20251:40 PM
To: 'Ashley Knight' <[email protected]>
Subject: RE:Scoping Meeting for Rosedale/Coffee
Hi Ashley,
| don’tknow if it’s too late but| wanted to mention that part of the CEQA and EIR process might include a study on how the new future shopping center could cause blight in other shopping centers by taking away existing tenants. | don’t know if that is something that is normally looked into or not.

Thank you,
Jim Davis
Vice President of Real Estate
Jaco Oil Company
0: 661-633-7566| M: 661-529-6793
3101 State Road | Bakersfield | CA 93308
[email protected]
Appendix B
Air Quality, Greenhouse Gas Emissions, and Energy
Technical Study
Klmley>»Horn
May 2026 | Air Quality, Greenhouse Gas Emissions, and Energy Technical Study

RIVERVIEW MARKET PROJECT
Bakersfield, California
Prepared for:

City of Bakersfield: Development Services – Planning Division Contact: Roque Nino, Principal Planner
1715 Chester Avenue, 2nd Floor
Bakersfield, California 93301
Prepared by:

PlaceWorks
Contact: Nicole Vermilion, Principal
3 MacArthur Place, Suite 1100
Santa Ana, California 92707
714.966.9220
[email protected]
www.placeworks.com
88PLACEWORKS

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS E MISSIO NS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION Table of Contents
May 2026 Page i
Section Page

1. INTRODUCTION.............................................................................................................1

1.1 PROJECT LOCATION...................................................................................................................... 1

1.2 PROJECT DESCRIPTION............................................................................................................... 1

1.3 CONSTRUCTION PHASING......................................................................................................... 7

2. REGULATORY SETTING ...............................................................................................9

2.1 AIR QUALITY..................................................................................................................................... 9

2.2 GREENHOUSE GAS EMISSIONS ............................................................................................. 24

2.3 ENERGY............................................................................................................................................. 40

3. ENVIRONMENTAL SETTING .......................................................................................45

3.1 SAN JOAQUIN VALLEY AIR BASIN......................................................................................... 45

3.2 SJVAB AREA DESIGNATIONS................................................................................................... 47

3.3 EXISTING AMBIENT AIR QUALITY....................................................................................... 48

3.4 EXISTING SITE EMISSIONS ...................................................................................................... 49

3.5 ELECTRIC AND NATURAL GAS UTILITIES ....................................................................... 49

3.6 EXISTING SITE ENERGY DEMAND...................................................................................... 50

3.7 SENSITIVE RECEPTORS ............................................................................................................. 50

4. CEQA THRESHOLDS...................................................................................................53

4.1 CEQA APPENDIX G THRESHOLDS ....................................................................................... 53

4.2 SAN JOAQUIN VALLEY AIR POLLUTION CONTROL DISTRICT SIGNIFICANCE CRITERIA........................................................................................................................................... 54

5. ENVIRONMENTAL IMPACTS.......................................................................................61

5.1 METHODOLOGY........................................................................................................................... 61

5.2 ENVIRONMENTAL IMPACTS.................................................................................................... 63

5.3 RECOMMENDED REDUCTION MEASURES...................................................................... 80

5.4 RESULTS WITH REDUCTION MEASURES........................................................................... 83

5.5 CUMULATIVE IMPACTS .............................................................................................................. 86

6. REFERENCES..............................................................................................................89

APPENDICES
Appendix A Modeling Summaries and Assumptions
Appendix B CalEEMod Outputs
Appendix C Off-Road Equipment and On-Road Vehicle Fuel Consumption Appendix D Ambient Air Quality Analysis & Construction Health Risk Assessment RIVERVIEW MARKET PROJECT AIR QUALITY . GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION Table of Contents
Page ii PlaceWorks
List of Figures
Figure Page
Figure 1 Aerial Photograph................................................................................................................................. 3 Figure 2 Project Phasing Plan............................................................................................................................. 5 Figure 3 Project Sources and Off-Site Receptor Locations......................................................................... 71 List of Tables
Table Page
Table 1 Proposed Project Land Uses............................................................................................................... 1 Table 2 Criteria Air Pollutant Health Effects Summary ............................................................................. 12 Table 3 Ambient Air Quality Standards for Criteria Pollutants................................................................. 14 Table 4 GHG Emissions and Their Relative Global Warming Potential Compared to CO2 ............. 25 Table 5 Summary of GHG Emissions Risks to California......................................................................... 28 Table 6 Priority Strategies for Local Government Climate Action Plans................................................ 32 Table 7 Attainment Status of Criteria Pollutants in the San Joaquin Valley Air Basin.......................... 48 Table 8 Ambient Air Quality Monitoring Summary.................................................................................... 49 Table 9 SJVAPCD Regional Criteria Air Pollutants Significance Thresholds ........................................ 54 Table 10 Ambient Air Quality Thresholds...................................................................................................... 55 Table 11 SJVAPCD Significant Impact Levels............................................................................................... 56 Table 12 SJVAPCD Screening Levels for Potential Odor Sources ............................................................ 57 Table 13 SJVAPCD Toxic Air Contaminants Incremental Risk Thresholds............................................ 58 Table 14 Annual Regional Construction Emissions...................................................................................... 64 Table 15 Average Daily Construction-Related Emissions............................................................................ 65 Table 16 Annual Regional Operation Emissions........................................................................................... 66 Table 17 Average Daily Operation-Related Emissions................................................................................. 67 Table 18 Ambient Air Quality Analysis Summary ......................................................................................... 67 Table 19 Comparison of Concentrations to Significant Impact Levels ..................................................... 68 Table 20 Construction Risk Summary ............................................................................................................. 70 Table 21 Project Operation GHG Emissions Inventory.............................................................................. 74 Table 22 Construction-Related Fuel Usage..................................................................................................... 77 Table 23 Project Electricity Demand............................................................................................................... 78 Table 24 Project Natural Gas Demand ........................................................................................................... 79 Table 25 Project Annual Operation-Related Fuel Usage.............................................................................. 80 Table 26 Annual Regional Operation Emissions With Reduction Measures AQ-2 and GHG-3 .......... 83 Table 27 Project Operation GHG Emissions Inventory With Reduction Measures GHG-1 and GHG-3 ................................................................................................................................................. 85 April 2026 Page 1

1. Introduction
This Air Quality, Greenhouse Gas (GHG) Emissions, and Energy Technical Study (technical study) is prepared for the City of Bakersfield (City) to evaluate the potential air quality and GHG emissions impacts pursuant to the California Environmental Quality Act (CEQA) from the development and operation of the Riverview Market (proposed project) in the City.

1.1 PROJECT LOCATION
As shown on Figure 1, Aerial Photograph, the approximately 46-acre project site (46.16 net acres) is an undeveloped L-shaped property that is generally situated along the south side of Rosedale Highway, north of the railroad tracks, west of Coffee Road, and east of El Toro Viejo Road in the City of Bakersfield. The project site comprises Parcel 2 of Tentative Parcel Map No. 12264. It is currently undeveloped but highly disturbed and does not currently generate emissions.

1.2 PROJECT DESCRIPTION
The proposed project involves construction and operation of commercial and retail uses. Development of the proposed project would occur over two development phases and encompass 405,531 square feet of total building space. Table 1, Proposed Project Land Uses, and Figure 2, Project Phasing Plan, show the types of land uses proposed by each development phase.

Table 1 Proposed Project Land Uses
Land Uses Amount (Building Square Feet)
Phase 1
Retail 196,331
Restaurant (sit down and fast casual) 22,996
Car Wash 4,100
Drive-Thru Restaurants 16,495
Health Club 24,993
Medical Office 8,996
Public Storage 40,000
Gas Filling Station (20 dual-sided fuel pumps) 428
Electrical and Fire Riser Rooms 1,672
Subtotal 316,007
Phase 2
Retail 80,871
Restaurant (sit down and fast casual) 8,799
Electrical and Fire Riser Rooms 277
RIVERVIEW MARKET PROJECT AIR QUALITY.GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

1. Introduction

Page 2 ends

Table 1 Proposed Project Land Uses
Land Uses Amount (Building Square Feet)
Subtotal 89,952
Full Buildout
Retail1. 2 277,202
Restaurant (sit down and fast casual) 31,795
Car Wash 4,100
Drive-Thru Restaurants3 16,495
Health Club 24,993
Medical Office 8,996
Public Storage 40,000
Gas Filling Station (20 dual-sided fuel pumps) 428
Electrical and Fire Riser Rooms4 1,949
Total 405,531
Notes:
1 Accounts for the proposed bank land use of 9,120 BSF. 2 For purposes of modeling, 277,230 BSF of retail space was modeled. 3 For purposes of modeling, 16,487 BSF of drive-thru restaurant space was modeled. 4 For purposes of modeling, 1,930 BSF of electrical and fire riser room space was modeled.

Other project components include vehicular access and circulation improvements (both on- and off-site); surface parking areas (up to 2,126 spaces) and drive aisles; pedestrian access and circulation improvements; various landscaping and green space (up to 379,446 square feet), hardscape, and lighting improvements; site and tenant signage; and infrastructure and utility improvements. The proposed green space improvements would include green space areas that consist of seating, shade structures, public art installations, and children’s play areas.

Proposed offsite vehicular access and circulation improvements include modification to the existing signalized intersection of Coffee Road and Jet Way. Specifically, the improvements will include the installation of a new traffic light pole/structure at the southeast corner of the Coffee Road and Jet Way intersection and any related roadway improvements (i.e., modification to the existing raised median to provide a dedicated left-turn lane, roadway striping). The project applicant would also improve a portion of the raised median on Rosedale Highway (the portion between Northwest Promenade and Coffee Road) by modifying it to provide a dedicated left-turn lane for west-bound traffic entering the project site at the signalized intersection. Other roadway improvements at this intersection will include striping.

All the uses proposed, as described in Table 1, are permitted uses pursuant to the provisions of Chapter 17.30 (M-2 General Manufacturing Zone), Section 17.30.020 (Permitted Uses) of the Bakersfield Zoning Code.

However, the proposed project includes an amendment to the City’s General Plan to change the project site land use designation from P (Public Facilities) to LI (Light Industrial). This change would facilitate the proposed use and create alignment with the site’s M-2 zoning designation, which under the City’s stacked zoning code allows, by right, all uses permitted under the City’s commercial zoning designations. Therefore, to proceed with the proposed project and its proposed uses and to provide consistency with the project site’s M-2 zoning designation, the LI designation has been determined to be the appropriate land use designation.

PlaceWorks
S
Y
ource: Nearmap, Inc., 2022.
0 Scale (Feet)
500
Figure 1 - Aerial Photograph
Residential
Residential
Commercial
Commercial
Coffee Rd
Rosedale Hwy
Ribston Ave
Wolf River Ave
Bolero A
Mcintosh
Wy
Crispin
St
Pink Lady
Wy
Firant-Kern Canal
Industrial
Commercial
Project Boundary
El Toro Viejo Rd

RIVERVIEW MARKET PROJECT AIR QUALITY, GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUD CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION Jet Wy
— ---- r - •. 1
2uit" a •
. a fr I. 3 fl
T
(3 Pl
' «
thieg I
7 or . s’ i
IG.GNaa/C ‘ $ J volin 3 7 A
1 HI
•J Ir/ 13 85 ’ ditint ) 1 - » rt l
* A
1 rdi 11 1 — - fa
. Jathy
AD h
NS
CU" r
* = r
i
I
*
- . \-
U PE/ F chigr
Menmmmn)
)0l) /
1 ;
or !■ 335
- 151. -rfnn" ec
r. : —
At e A
. Js .

I
_______________
2 tild
S
ft
ves
~ wo
i"
— 4
" * ff s j
• 3
• ;
I
en
r
±2
- -- —TSA/SII
E-rg ' Aflns 1 J 1 1 t
1” '
JO
I
a
fros,
20 y‘m f*a (4
t e ”
‘i Hamas sutr 4 5
. ■
— •
Pern) i • - — ! ’
I
4 0
?
a
3 I
m2
-
eryua
ar
. -Mey
atte
th =wn.-.

E i
Chas '
' ■ | (i
, — %
I n
“ftepe
— -e - ,
Ri
RIVERVIEW MARKET PROJECT AIR QUALITY.GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

1. Introduction

Page 4 ends

This page intentionally left blank.

S
Y
ource: DJM 2025.

PlaceWorks
0 Scale (Feet)
225

RIVERVIEW MARKET PROJECT AIR QUALITY, GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUD CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION Figure 2 - Project Phasing Plan

PACFOSEDLEFT
PADS
PAD 4 _____ DT/FAST CASUAL_______ PAD 8 _ _ PAD 7 _ -------- ------------------

DT RESTAURANT - RETAIL ROSEDALE HIGHWAY SIGNAL
4694 SF

SPRINKLEREO SPRINKLERED
PG&E SETBACK A“,
k
PROPERTY UNE - -10 wide 10 SETBACK 15 LANDSCAPE SETBACK 3 SETBACK MULTLuSE PAIN —-5—= ===*== - OHE --— ~ ca- E
Jz j y--------** *e— aft Fi = 1 5 L NDSCAPE SETBACK IT 1 J
L PPP 127y 8 n a I X 1
i
Iw minnide BL 20%, WJUU 1. P
— Us IAJ
2 3
pp nrgrme w
J 1 - •
g 1.
1 5
RETAIL 3
rtt oPP 2
r~ |l (t T
5 b P [ 0-eJ ta26.

I, %
—7“b t
— I- S Popor,. 14411 J 2: w .0 AYx r
15—5 $ 1 PG&E SETBACK o WENUI Site Summary U 5 <7 0/ PEN GREEN SPACE 1 S’ ’ cit Pol c
1 J J • "22 t l"Lel t
8 4-) 1__ s S
L
r
s %e G <0 PLAZA — I--------- W

CONTROLLER FUEL CANOPY CONTROLLER I
OFFICE 20 DUAL SIDED STORAGE PP
I
PROPERTY LNE 308 SF DISPENSERS 120 SF 6 • 120 7
SHOPS 2 1
-=fn8 C
PLAZA
”1 1000
CASUAL REST.

TOTAL SITE AREA
#

46.16 Ac
4’^X4 i
l
I 38-0 2
I
d
— - ■ 6 I
12 SPRINKLERED ' 3mm IB zu 2 I % / 200
Site Summary - Future Expansion —T 200-g; 6 t 1000
1 11 0
=
MAJOR D " 0
I 1
7 0 Si 1
19 ?0“, TOT 1
35 ■ 3
e
61 oro > as— ol 45010, PARKING REQUIRED te i 5 1
6+
; i
8 1 REO. AREA(SF) STALLS
2 II
1/300 SF 206,543 688
I
20 0 “"(l I
a5y l 02—f 6
ts6-o
l
. PROPOSED MAJOR F — PP*Pe— wr 3
213 o TRAFF) - SIGNAL
I
RETAIL U. a 46.16 Ac 18.012 SF C
a? 20 0 4/0, I
I
SPRINKLERED PG&E SETBACK /0 f;?t I
1,547
0241 - 1 ■ I
I
n
munat. I d 2
6 U—H. -.f -JJI
rmtBed I
I
1-8
I II (. t07—
2 PARKING REQUIRED
I
I I 0; REQ. AREA (SF) STALLS
I
V300 SF 270,160 901
04 . d
all 8 I 6 1 k — I t. 0
"Res “I SPPNKLERED vo %2 s • A
0 1# n50 I
torr

1.740 1 5 I P 1
22 owake 1
I
I
p
o,, -o. *20% LEGEND 15-g
INMA TN U 0 o I
.Njis B i l"J ")

MAJOR J
. 14,176 SF £
J 1 WIT
137
Fl PHASE 1 s
40,000 -

1.949
ar’*5 U 1
PHASE 2 FUTURE EXPANSION 1 ---
IL+—
0 I
I
I
I
0 ,G
1 t
LU
LU

PARKING

SURPLUS A
100
044
45 400,582 S
406,531 SF
?
o
O
MAJOR 1
RETAIL

25.013 SF
s
8 MAJOR I
RETAIL
25013 SF
I

MAJOR H
RETAIL
19221SF
100
644
45 S
5 RETAIL

10.000 SF

SPRINKLERED
it
a
oMex.
vamatye
' wdwaa --
w-TOTAL GROSS FLOOR AREA

TOTAL GROSS FLOOR FOOTPRINT AREA

LAND TO BUILDING RATIO

BUILDING COVERAGE
1 fl- •
□

MAJOR G
RETAIL

15.562 SF

MAJOR G
RETAIL
15,562 SF

SPRINKLERED
1753
s0.g
10-g

SETBACK
339,957 $5
341,906 SF

TOTAL GROSS FLOOR FOOTPRINT AREA

LAND TO BUILDING RATIO

BUILDING COVERAGE SQUARE FOOTAGE/UNIT
Win
31,756
16,495
*.100
24,993
8936
40,000
1,949

RESTAURANT

6.698 SF

SPRINKLERED

PRELIMINARY

RETENTION BASIN
1/200 SF
1/75 SF
1/200
1/Employco
1 /Employee
N/A
TOTAL:

RETAIL
4,094 SP
2 *

TOTAL SITE AREA

TOTAL GROSS FLOOR AREA
APN: 368-010-05
ZONING USE: (M-2) GENERAL MANUFACTURING
LAND USE DESIGNATION: (LI-1) LIGHT INDUSTRIAL
REQUIRED SETBACKS:

Front 10 Ft
Rear;n/n
Side: 10 Ft
BLDG. HEIGHT: 90 Ft Max
PARKING DIMENSIONS: 9FL*18Ft
DRIVE AISLE WIDTH: 25 Ft
FIRELANE ACCESS WIDTH: 20 Ft Min
LANDSCAPE SETBACK: 10 Fl Mr
TREE PLANTING: ’TREE PER 6 PARKING SPACES MAJOR E
RETAIL
25,047 SF

MAJOR J

14.176 SF

SPRINKLERED
2,102 State
24 State
2,126 Stalls

6.22 1,000S1
Q
<
o
cr
rorswngA AU.

APN: 368-010-05
ZONING USE: (M-2) GENERAL MANUFACTURING
LAND USE DESIGNATION (LI-1) LIGHT INDUSTRIAL
REQUIRED SETBACKS:

Front 10 F1
Haar n a
Sde: 10 Ft
BLDG. HEIGHT: 90 Ft Max
PARKING DIMENSIONS 9 Ft x 18 Ft
DRIVE AISLE WIDTH: 25 Ft.

FIRELANE ACCESS WIDTH; 20 Ft LU
LANDSCAPE SETBACK: 10 Ft LU
TREE PLANTING: ’TREE PER 6 PARKING SPACES

SQUARE FOOTAGE/UNIT
277,202
31,79
16,495

4.100
24,933
8,996
PADS
REST.
7,967 SF

SPRINKLERED
10-0

SETBACK
—10WiDE

MULTHUSEPATH

2.010,574 St
405,531 st
385,531 st
398 n

19.18 %

32.027
48,201
8,905

4.100

40.000

1.949
341.904
PARKING PROVIDED__________________

PROPOSED PARKING STALLS

PICK-UP WINDOW CREDIT
OVERALL PROPOSED PARKING STALLS:

PROPOSED PARKING RATIO:
2,010,574 St
341,906 st
321,906 St
4 88 /
1801 %
PAD 13

RESTAURANT

6.533 SF

SPRINKLERED
PARKING PROVIDED______________________________

PROPOSED PARKING STALLS

PICK-UP WINDOW CREDIT
OVERALL PROPOSED PARKING STALLS:

PROPOSED PARKING RATIO:

32.027
48,291

8.906

4.100

40.000

1.949
405,531
I
I
nne
aaiiacn

MAJOR H
RETAIL

19.221 SF
SPRINKLERED ""
211-0
1/200 SF
1/78 SF
1/200
1/Employee
1/Employee
N/A___
TOTAL:

2.057 Stalls
-24Stals__
2,081 Stalls
S.13 /1.0008F
PAD 11

DT REST RETAIL
11,719 SF

SPRINKLERED
PROJECT SITE USES_____________
Retadl
Restaurant (Sit Down and Fast Casual)
Restaurant (Drio-Thru)
Car Wash
Heath Club
Modical Office
Public Storage
Elec, & Fire Room_________
TOTAL LEASEABLE AREA__

TOTAL GROSS FLOOR AREA
2224
•tt-tr

PROJECT SITE USES
Retail
Restaurant (Sit Down and Fast Casual)
Restaurant (Dnve-Thru)
Car Wash
HoalthCaub
Medical Office
Public Storage
Elec. & Fire Room

TOTAL LEASEABLE AREA

TOTAL GROSS FLOOR AREA
10WDE

MULTIUSE PATH
""BA
LexsnNaTRAFFIC SIGNAL
M WIDE

MULTI-USE PATH
MAJOR c y

10.000 SF 8
I
1 •
'l
•IL
Fi
•?
1 PAD 12
MED. OFFICE
9,129 SF

SPRINKLERED
PAD 2

CAR WASH
4,100 SF
USE
Retal- Singlo Tenant
/Bank/Fanees/Olfce
Rotal- Mut Tenant/Shops
Restaurant / O/T
Medical Cue
Cawash
Publo Storage
Elec. & Fire Room
SHOPS 2
RETAIL/FAST —
CASUAL REST.

10.858 SF
48-10,

MAJOR E
RETAIL
25047SF

SPRINKLERED
me
-
I

SPR NKLERED
y.3
.0 e?
H166
th

MAJOR B
MARKET s

36.098 8F "

SPRINKLERED
---------- |I
&
PAD 10

DT/FAST
CASUAL REST.

RETAIL
10 110 SF

SPRINKLERED
& 9 4 s

4.277 SF

NON SPRINKLERED
7 .

I ero 7
eWEc StAM
- MAJORC
10,000 SF
PAD 14

REST/RETAIL

7.138 SF

SPRINKLERED
h
s. a
USE
Retni- Single. Tenant
/BankFmness/Olfce
Retad- Mult Tenant/Shops
Restaurants / D/T
Medical Cinic
Carwash
Public Storage
Elec 8 Fir Room

DT RESTAURANT

2.578 SF

NON SPRINKLERED
toe3o
______ 01 /FAST CASUAL _ _

RESTAURANT
8,224 SF

SPRINKLERED
I
I

MAJOR A

HEALTH CLUB
24,993 SF

SPRINKLEREO
' "V----------------------—
MW’ t
9 I
I
I
I
I
I
E

MAJOR D
RETAIL
10000 SF
8 s -
“=r si
. ■
il
I
I
I
I
I
I
I
I
I
I
I

MAJOR F
RETAIL
18,012 SF
vmr
----
- - PAP 3________________

DTRESTAURANT
760 SF

NON SPRINKLERED
0"- • 0 ON GRADE LOADING
C ‘
TORPOckEY
E
(T SHOPS 2 — RETAIL FAST •
A ■b
RIVERVIEW MARKET PROJECT AIR QUALITY.GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

1. Introduction

Page 6 ends

This page intentionally left blank.

RIVERVIEW MARKET PROJECT AIR QUALITY, GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

1. Introduction
May 2026 Page 7
In addition to applying for a general plan amendment, the project applicant also seeks approval of a tentative tract map (“Tract Map”) subdividing the project site in accordance with the California Subdivision Map Act and Title 16 of the Bakersfield Municipal Code. The Tract Map proposes to divide the project site into 30 separate legal parcels to accommodate the project’s layout as set forth in the project phasing plan. The Tract Map also accounts for a 20-foot-wide public utility easement that is required to tie into the public water system.

1.3 CONSTRUCTION PHASING
Upon City approval, project development is anticipated to be completed in two development phases, as illustrated by the proposed phasing plan. The first phase would consist of development of 36.95 acres located at the north end of the project site, as well as the associated off-site improvements. The second phase would develop the remaining 9.21 acres at the southeast end of the project site. It should be noted that the project applicant may decide to accelerate or postpone the second phase depending on market conditions. For purposes of this analysis, construction of the proposed project would commence in 2026 and be completed in 2027.

The anticipated general schedule for each of the development phases is as follows:
 Phase 1: Year 2026
 Phase 2: Year 2027
RIVERVIEW MARKET PROJECT AIR QUALITY.GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

1. Introduction

Page 8 ends

This page intentionally left blank.

May 2026 Page 9

2. Regulatory Setting

2.1 AIR QUALITY
Ambient air quality standards (AAQS) have been adopted at state and federal levels for criteria air pollutants.

In addition, both the state and federal governments regulate the release of toxic air contaminants (TAC).

Bakersfield is in the San Joaquin Valley Air Basin (SJVAB) and is subject to the rules and regulations imposed by the San Joaquin Valley Air Pollution Control District (SJVAPCD), the California AAQS adopted by the California Air Resources Board (CARB), and the National AAQS adopted by the United States Environmental Protection Agency (EPA). Federal, state, regional, and local laws, regulations, plans, or guidelines that are potentially applicable to the proposed project are summarized below.

2.1.1 Air Pollutants of Concern

2.1.1.1 CRITERIA AIR POLLUTANTS
The pollutants emitted into the ambient air by stationary and mobile sources are categorized as primary and/or secondary pollutants. Primary air pollutants are emitted directly from sources. Carbon monoxide (CO), volatile organic compounds (VOC), nitrogen oxides (NOX), sulfur dioxide (SO2), coarse inhalable particulate matter (PM10), fine inhalable particulate matter (PM2.5), and lead (Pb) are primary air pollutants. Of these, CO, SO2, nitrogen dioxide (NO2), PM10, and PM2.5 are “criteria air pollutants,” which means that AAQS have been established for them. VOC and NOX are criteria pollutant precursors that form secondary criteria air pollutants through chemical and photochemical reactions in the atmosphere. Ozone (O3) and NO2 are the principal secondary pollutants.

Each of the primary and secondary criteria air pollutants and its known health effects are described below.

Carbon Monoxide (CO) is a colorless, odorless gas produced by incomplete combustion of carbon substances, such as gasoline or diesel fuel. CO is a primary criteria air pollutant. CO concentrations tend to be the highest during winter mornings with little to no wind, when surface-based inversions trap the pollutant at ground levels. The highest ambient CO concentrations are generally found near traffic-congested corridors and intersections. The primary adverse health effect associated with CO is interference with normal oxygen transfer to the blood, which may result in tissue oxygen deprivation (USEPA 2026a). The SJVAB is designated as being in attainment/unclassified under both the California AAQS and National AAQS (CARB 2026a).

Nitrogen Oxides (NOX) are a byproduct of fuel combustion and contribute to the formation of O3, PM10, and PM2.5. The two major forms of NOX are nitric oxide (NO) and nitrogen dioxide (NO2). The principal form of NO2 produced by combustion is NO, but NO reacts with oxygen to form NO2, creating the mixture of NO and NO2 commonly called NOX. NO2 acts as an acute irritant and, in equal concentrations, is more injurious than NO. At atmospheric concentrations, however, NO2 is only potentially irritating. NO2 absorbs

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 10 ends

blue light; the result is a brownish-red cast to the atmosphere and reduced visibility. NO2 exposure concentrations near roadways are of particular concern for susceptible individuals, including asthmatics, children, and the elderly. Current scientific evidence links short-term NO2 exposures, ranging from 30 minutes to 24 hours, with adverse respiratory effects, including airway inflammation in healthy people and increased respiratory symptoms in people with asthma. Also, studies show a connection between elevated short-term NO2 concentrations and increased visits to emergency departments and hospital admissions for respiratory issues, especially asthma (USEPA 2026a). The SJVAB is designated in attainment/unclassified under the National AAQS and attainment under the California AAQS (CARB 2026a; SJVAPCD 2026c).

Sulfur Dioxide (SO2) is a colorless, pungent, irritating gas formed by the combustion of sulfurous fossil fuels.

It enters the atmosphere as a result of burning high-sulfur-content fuel oils and coal and chemical processes at plants and refineries. Gasoline and natural gas have very low sulfur content and do not release significant quantities of SO2. When sulfur dioxide forms sulfates (SO4) in the atmosphere, together these pollutants are referred to as sulfur oxides (SOX). Thus, SO2 is both a primary and secondary criteria air pollutant. At sufficiently high concentrations, SO2 may irritate the upper respiratory tract. Current scientific evidence links short-term exposures to SO2, ranging from 5 minutes to 24 hours, with an array of adverse respiratory effects, including bronchoconstriction and increased asthma symptoms. These effects are particularly adverse for asthmatics at elevated ventilation rates (e.g., while exercising or playing) at lower concentrations and when combined with particulates, SO2 may do greater harm by injuring lung tissue. Studies also show a connection between short-term exposure and increased visits to emergency facilities and hospital admissions for respiratory illnesses, particularly in at-risk populations such as children, the elderly, and asthmatics (US EPA 2026a). The SJVAB is designated attainment under the California and as attainment/unclassified under the National AAQS (CARB 2026a; SJVAPCD 2026c).

Suspended Particulate Matter (PM10 and PM2.5) consists of finely divided solids or liquids such as soot, dust, aerosols, fumes, and mists. Two forms of fine particulates are now recognized and regulated. Inhalable coarse particles, or PM10, include the particulate matter with an aerodynamic diameter of 10 microns (i.e., 10 millionths of a meter or 0.0004 inch) or less. Inhalable fine particles, or PM2.5, have an aerodynamic diameter of 2.5 microns (i.e., 2.5 millionths of a meter or 0.0001 inch) or less. Particulate discharge into the atmosphere results primarily from industrial, agricultural, construction, and transportation activities. However, wind action on arid landscapes also contributes substantially to local particulate loading (i.e., fugitive dust). Both PM10 and PM2.5 may adversely affect the human respiratory system, especially in people who are naturally sensitive or susceptible to breathing problems (South Coast AQMD 2005).

The EPA’s scientific review concluded that PM2.5, which penetrates deeply into the lungs, is more likely than PM10 to contribute to health effects and at concentrations that extend well below those allowed by the current PM10 standards. These health effects include premature death and increased hospital admissions and emergency room visits (primarily the elderly and individuals with cardiopulmonary disease); increased respiratory symptoms and disease (children and individuals with cardiopulmonary disease such as asthma); decreased lung functions (particularly in children and individuals with asthma); and alterations in lung tissue and structure and in respiratory tract defense mechanisms (South Coast AQMD 2005). There has been emerging evidence that ultrafine particulates, which are even smaller particulates with an aerodynamic diameter of <0.1 microns or less (i.e., ≤0.0001 millimeter) have human health implications because their toxic components may initiate or

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 11
facilitate biological processes that may lead to adverse effects to the heart, lungs, and other organs (South Coast AQMD 2013). However, the EPA and CARB have not adopted AAQS to regulate these particulates. Diesel particulate matter is classified by CARB as a carcinogen (CARB 1998). Particulate matter can also cause environmental effects such as visibility impairment, environmental damage, and aesthetic damage (USEPA 2026a). The SJVAB is a nonattainment area for PM2.5 under California and National AAQS and a nonattainment area for PM10 under the California AAQS and an attainment area under the National AAQS (CARB 2026a; SJVAPCD 2026c).

Ozone (O3) is a key ingredient of “smog” and is a gas that is formed when VOCs and NOX, both by-products of internal combustion engine exhaust, undergo photochemical reactions in sunlight. O3 is a secondary criteria air pollutant. O3 concentrations are generally highest during the summer months when direct sunlight, light winds, and warm temperatures create favorable conditions for its formation. O3 poses a health threat to those who already suffer from respiratory diseases as well as to healthy people. Breathing O3 can trigger a variety of health problems, including chest pain, coughing, throat irritation, and congestion. It can worsen bronchitis, emphysema, and asthma. Ground-level O3 also can reduce lung function and inflame the linings of the lungs.

Repeated exposure may permanently scar lung tissue. O3 also affects sensitive vegetation and ecosystems, including forests, parks, wildlife refuges, and wilderness areas. In particular, O3 harms sensitive vegetation during the growing season US EPA 2023a). The SJVAB is designated extreme nonattainment under the California AAQS (1-hour and 8-hour) and nonattainment under the National AAQS (8-hour) (CARB 2026a; SJVAPCD 2026c).

Volatile Organic Compounds (VOC) are composed primarily of hydrogen and carbon atoms. Internal combustion associated with motor vehicle usage is the major source of VOCs. Other sources include evaporative emissions from paints and solvents, asphalt paving, and household consumer products such as aerosols. There are no AAQS for VOCs. However, because they contribute to the formation of O3, SJVAPCD has established a significance threshold for this pollutant.

Lead (Pb) is a metal found naturally in the environment as well as in manufactured products. Once taken into the body, lead distributes throughout the body in the blood and accumulates in the bones. Depending on the level of exposure, lead can adversely affect the nervous system, kidney function, immune system, reproductive and developmental systems, and the cardiovascular system. Lead exposure also affects the oxygen-carrying capacity of the blood. The effects of lead most commonly encountered in current populations are neurological effects in children and cardiovascular effects in adults (e.g., high blood pressure and heart disease). Infants and young children are especially sensitive to even low levels of lead, which may contribute to behavioral problems, learning deficits, and lowered IQ (USEPA 2026a). The major sources of lead emissions have historically been mobile and industrial sources. As a result of the EPA’s regulatory efforts to remove lead from gasoline, emissions of lead from the transportation sector dramatically declined by 95 percent between 1980 and 1999, and levels of lead in the air decreased by 94 percent between 1980 and 1999. Today, the highest levels of lead in air are usually found near lead smelters. The major sources of lead emissions today are ore and metals processing and piston-engine aircraft operating on leaded aviation gasoline. However, in 2008 the EPA and CARB adopted stricter lead standards, and special monitoring sites immediately downwind of lead sources recorded very localized violations of the new state and federal standards. The SJVAB is designated attainment under the California AAQS for lead and No Designation/Classification under the National AAQS (CARB

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 12 ends

2026a; SJVAPCD 2026c). There are no lead-emitting sources associated with this project, and therefore, lead is not a pollutant of concern for the proposed project.

Table 2, Criteria Air Pollutant Health Effects Summary, summarizes the potential health effects associated with the criteria air pollutants.

Table 2 Criteria Air Pollutant Health Effects Summary
Pollutant Health Effects Examples of Sources
Carbon Monoxide (CO) • Chest pain in heart patients
• Headaches, nausea
• Reduced mental alertness
• Death at very high levels
Any source that burns fuel such as cars, trucks,
construction and farming equipment, and
residential heaters and stoves
Ozone (O3) • Cough, chest tightness
• Difficulty taking a deep breath
• Worsened asthma symptoms
• Lung inflammation
Atmospheric reaction of organic gases with
nitrogen oxides in sunlight
Nitrogen Dioxide (NO2) • Increased response to allergens • Aggravation of respiratory illness
Same as carbon monoxide sources
Particulate Matter (PM10
and PM2.5)
• Hospitalizations for worsened heart diseases
• Emergency room visits for asthma
• Premature death
Cars and trucks (particularly diesels)
Fireplaces and woodstoves
Windblown dust from overlays, agriculture, and
construction
Sulfur Dioxide (SO2) • Aggravation of respiratory disease (e.g., asthma and emphysema)
• Reduced lung function
Combustion of sulfur-containing fossil fuels,
smelting of sulfur-bearing metal ores, and industrial
processes
Lead (Pb) • Behavioral and learning disabilities in children • Nervous system impairment
Contaminated soil
Source: CARB 2026b.

2.1.1.2 TOXIC AIR CONTAMINANTS
People exposed to toxic air contaminants (TAC) at sufficient concentrations and durations may have an increased chance of getting cancer or experiencing other serious health effects. These health effects can include damage to the immune system as well as neurological, reproductive (e.g., reduced fertility), developmental, respiratory, and other health problems (USEPA 2026b). By the last update to the TAC list in December 1999, CARB had designated 244 compounds as TACs (CARB 1999). Additionally, CARB has implemented control measures for a number of compounds that pose high risks and show potential for effective control. There are no air quality standards for TACs. Instead, TAC impacts are evaluated by calculating the health risks associated with a given exposure. The majority of the estimated health risks from TACs can be attributed to relatively few compounds, the most relevant to the proposed project being particulate matter from diesel-fueled engines.

Diesel Particulate Matter
In 1998, CARB identified diesel particulate matter (DPM) as a TAC. Previously, the individual chemical compounds in diesel exhaust were considered TACs. Almost all diesel exhaust particles are 10 microns or less in diameter. Because of their extremely small size, these particles can be inhaled and eventually trapped in the

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 13
bronchial and alveolar regions of the lungs. Long-term (chronic) inhalation of DPM is likely a lung cancer risk.

Short-term (i.e., acute) exposure can cause irritation and inflammatory symptoms and may exacerbate existing allergies and asthma symptoms (USEPA 2002).

2.1.2 Regulatory Background
Ambient air quality standards have been adopted at the state and federal levels for criteria air pollutants. In addition, both the state and federal government regulate the release of TACs. The proposed project is in the SJVAB and is subject to the rules and regulations imposed by the SJVAPCD, the California AAQS adopted by CARB, and National AAQS adopted by the EPA. Federal, state, regional, and local laws, regulations, plans, or guidelines that are potentially applicable to the proposed project are summarized in this section.

2.1.2.1 FEDERAL AND STATE
Ambient Air Quality Standards
The Clean Air Act (CAA) was passed in 1963 by the US Congress and has been amended several times. The 1970 CAA amendments strengthened previous legislation and laid the foundation for the regulatory scheme of the 1970s and 1980s. In 1977, Congress again added several provisions, including nonattainment requirements for areas not meeting National AAQS and the Prevention of Significant Deterioration program. The 1990 amendments represent the latest in a series of federal efforts to regulate the protection of air quality in the United States. The CAA allows states to adopt more stringent standards or to include other pollution species.

The California Clean Air Act, signed into law in 1988, requires all areas of the state to achieve and maintain the California AAQS by the earliest practical date. The California AAQS tend to be more restrictive than the National AAQS.

These National AAQS and California AAQS are the levels of air quality considered to provide a margin of safety in the protection of the public health and welfare. They are designed to protect “sensitive receptors” most susceptible to further respiratory distress, such as asthmatics, the elderly, very young children, people already weakened by other disease or illness, and persons engaged in strenuous work or exercise. Healthy adults can tolerate occasional exposure to air pollutant concentrations considerably above these minimum standards before adverse effects are observed.

Both California and the federal government have established health-based AAQS for seven air pollutants. As shown in Table 3, Ambient Air Quality Standards for Criteria Pollutants, these pollutants are ozone (O3), nitrogen dioxide (NO2), carbon monoxide (CO), sulfur dioxide (SO2), coarse inhalable particulate matter (PM10), fine inhalable particulate matter (PM2.5), and lead (Pb). In addition, the state has set standards for sulfates, hydrogen sulfide, vinyl chloride, and visibility-reducing particles. These standards are designed to protect the health and welfare of the populace with a reasonable margin of safety.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 14 ends

Table 3 Ambient Air Quality Standards for Criteria Pollutants Pollutant Averaging Time
California
Standard1
Federal Primary
Standard2 Major Pollutant Sources
Ozone (O3)3 1 hour 0.09 ppm * Motor vehicles, paints, coatings, and solvents. 8 hours 0.070 ppm 0.070 ppm
Carbon Monoxide
(CO)
1 hour 20 ppm 35 ppm Internal combustion engines, primarily gasoline-powered motor vehicles.
8 hours 9.0 ppm 9 ppm
Nitrogen Dioxide
(NO2)
Annual Arithmetic
Mean

0.030 ppm 0.053 ppm Motor vehicles, petroleum-refining operations, industrial sources, aircraft, ships, and railroads.
1 hour 0.18 ppm 0.100 ppm
Sulfur Dioxide
(SO2)
Annual Arithmetic
Mean
* 0.030 ppm Fuel combustion, chemical plants, sulfur recovery plants, and metal processing.
1 hour 0.25 ppm 0.075 ppm
24 hours 0.04 ppm 0.14 ppm
Respirable Coarse
Particulate Matter
(PM10)
Annual Arithmetic
Mean
20 µg/m3 * Dust and fume-producing construction, industrial, and agricultural operations, combustion, atmospheric
photochemical reactions, and natural activities (e.g., wind-24 hours 50 µg/m raised dust and ocean sprays). 3 150 µg/m3 Respirable Fine
Particulate Matter
(PM2.5)4,6
Annual Arithmetic
Mean
12 µg/m3 9 µg/m3 Dust and fume-producing construction, industrial, and agricultural operations, combustion, atmospheric
photochemical reactions, and natural activities (e.g., wind-24 hours * 35 µg/m raised dust and ocean sprays). 3 Lead (Pb) 30-Day Average 1.5 µg/m3 * Present source: lead smelters, battery manufacturing & recycling facilities. Past source: combustion of leaded Calendar Quarter * 1.5 µg/m gasoline. 3
Rolling 3-Month
Average
* 0.15 µg/m3
Sulfates (SO4)5 24 hours 25 µg/m3 * Industrial processes.

Visibility Reducing
Particles
8 hours ExCo
=0.23/km
visibility of
10≥ miles
* Visibility-reducing particles consist of suspended
particulate matter, which is a complex mixture of tiny
particles that consists of dry solid fragments, solid cores with liquid coatings, and small droplets of liquid. These particles vary greatly in shape, size and chemical
composition, and can be made up of many different
materials such as metals, soot, soil, dust, and salt.

Hydrogen Sulfide 1 hour 0.03 ppm * Hydrogen sulfide (H2S) is a colorless gas with the odor of rotten eggs. It is formed during bacterial decomposition of sulfur-containing organic substances. Also, it can be
present in sewer gas and some natural gas and can be
emitted as the result of geothermal energy exploitation.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 15
Table 3 Ambient Air Quality Standards for Criteria Pollutants Pollutant Averaging Time
California
Standard1
Federal Primary
Standard2 Major Pollutant Sources
Vinyl Chloride 24 hours 0.01 ppm * Vinyl chloride (chloroethene), a chlorinated hydrocarbon, is a colorless gas with a mild, sweet odor. Most vinyl
chloride is used to make polyvinyl chloride (PVC) plastic and vinyl products. Vinyl chloride has been detected near landfills, sewage plants, and hazardous waste sites, due to microbial breakdown of chlorinated solvents.

Source: CARB 2024.

Notes: ppm: parts per million; μg/m3: micrograms per cubic meter * Standard has not been established for this pollutant/duration by this entity. 1 California standards for O3, CO (except 8-hour Lake Tahoe), SO2 (1 and 24 hour), NO2, and particulate matter (PM10, PM2.5, and visibility reducing particles), are values that are not to be exceeded. All others are not to be equaled or exceeded. California ambient air quality standards are listed in the Table of Standards in Section 70200 of Title 17 of the California Code of Regulations. 2 National standards (other than O3, PM, and those based on annual arithmetic mean) are not to be exceeded more than once a year. The O3 standard is attained when the fourth highest 8-hour concentration measured at each site in a year, averaged over three years, is equal to or less than the standard. For PM10, the 24-hour standard is attained when the expected number of days per calendar year with a 24-hour average concentration above 150 µg/m3 is equal to or less than one. For PM2.5, the 24-hour standard is attained when 98 percent of the daily concentrations, averaged over three years, are equal to or less than the standard. 3 On October 1, 2015, the national 8-hour ozone primary and secondary standards were lowered from 0.075 to 0.070 ppm. 4 On December 14, 2012, the national annual PM2.5 primary standard was lowered from 15 μg/m3 to 12.0 µg/m3. The existing national 24- hour PM2.5 standards (primary and secondary) were retained at 35 µg/m3, as was the annual secondary standard of 15 µg/m3. The existing 24-hour PM10 standards (primary and secondary) of 150 µg/m3 also were retained. The form of the annual primary and secondary standards is the annual mean, averaged over 3 years.
5 On June 2, 2010, a new 1-hour SO2 standard was established, and the existing 24-hour and annual primary standards were revoked. The 1- hour national standard is in units of parts per billion (ppb). California standards are in units of parts per million (ppm). To directly compare the 1-hour national standard to the California standard the units can be converted to ppm. In this case, the national standard of 75 ppb is identical to 0.075 ppm.
6 On February 7, 2024, the national annual PM2.5 standard was lowered from 12 μg/m3 to 9 µg/m3. The existing national 24-hour PM2.5 standards (primary and secondary), secondary annual PM2.5 standard, and PM10 standards (primary and secondary) were retained California has also adopted a host of other regulations that reduce criteria pollutant emissions:
 Assembly Bill (AB) 1493: Pavley Fuel Efficiency Standards. Pavley I is a clean-car standard that reduces greenhouse gas emissions from new passenger vehicles (light-duty auto to medium-duty vehicles) from 2009 through 2016. In January 2012, CARB approved the Advanced Clean Cars program (formerly known as Pavley II) for model years 2017 through 2025.
 Senate Bill (SB) 1078, SB 107, SB 350. SB 100, and SB 1020: Renewables Portfolio Standards. A major component of California’s Renewable Energy Program is the renewables portfolio standard (RPS) established under SB 1078 (Sher) and SB 107 (Simitian). Under the RPS, certain retail sellers of electricity were required to increase the amount of renewable energy each year by at least 1 percent to reach at least 20 percent by December 30, 2010. Subsequent RPS requirements include an RPS of 40 percent by 2024 set under SB 350 and RPS requirements of 50 percent by 2026, 60 percent by 2030, and 100 percent by 2045 under SB 100. In addition, SB 1020 sets RPS requirement of 90 percent by 2035 and 95 percent by 2040. Furthermore, SB 1020 also requires state agencies to procure 100 percent of electricity from renewable energy and zero-carbon resources by 2035.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 16 ends

 Heavy-Duty (Tractor-Trailer) Greenhouse Gas Regulation. The tractors and trailers subject to this regulation must either use EPA SmartWay-certified tractors and trailers or retrofit their existing fleet with SmartWay-verified technologies. The regulation applies primarily to owners of 53-foot or longer box‐type trailers, including both dry‐van and refrigerated‐van trailers, and owners of the heavy‐duty tractors that pull them on California highways. These owners are responsible for replacing or retrofitting their affected vehicles with compliant aerodynamic technologies and low rolling resistance tires. Sleeper cab tractors model year 2011 and later must be SmartWay certified. All other tractors must use SmartWay-verified low-rolling-resistance tires. There are also requirements for trailers to have low-rolling-resistance tires and aerodynamic devices
 California Code of Regulations (CCR), Title 20: Appliance Energy Efficiency Standards. The 2006 Appliance Efficiency Regulations (20 CCR Sections 1601–1608) were adopted by the California Energy Commission on October 11, 2006, and approved by the California Office of Administrative Law on December 14, 2006. The regulations include standards for both federally regulated appliances and non– federally regulated appliances.
 24 CCR, Part 6: Building and Energy Efficiency Standards. Energy conservation standards for new residential and nonresidential buildings adopted by the California Energy Resources Conservation and Development Commission (now the California Energy Commission) in June 1977.  24 CCR, Part 11: Green Building Standards Code. Establishes planning and design standards for sustainable site development, energy efficiency (in excess of the California Energy Code requirements), water conservation, material conservation, and internal air contaminants. 1 Tanner Air Toxics Act and Air Toxics Hot Spot Information and Assessment Act Public exposure to TACs is a significant environmental health issue in California. In 1983, the California legislature enacted a program to identify the health effects of TACs and reduce exposure to them. The California Health and Safety Code defines a TAC as “an air pollutant which may cause or contribute to an increase in mortality or in serious illness, or which may pose a present or potential hazard to human health” (17 CCR Section 93000). A substance that is listed as a hazardous air pollutant pursuant to Section 112(b) of the federal Clean Air Act (42 US Code Section 7412[b]) is a TAC. Under state law, the California Environmental Protection Agency, acting through CARB, is authorized to identify a substance as a TAC if it is an air pollutant that may cause or contribute to an increase in mortality or serious illness or may pose a present or potential hazard to human health.

California regulates TACs primarily through Assembly Bill (AB) 1807 (Tanner Air Toxics Act) and AB 2588 (Air Toxics “Hot Spot” Information and Assessment Act of 1987). The Tanner Air Toxics Act sets forth a formal procedure for CARB to designate substances as TACs. Once a TAC is identified, CARB adopts an “airborne toxics control measure” for sources that emit designated TACs. If there is a safe threshold for a substance (i.e., a point below which there is no toxic effect), the control measure must reduce exposure to below 1 The green building standards became mandatory in the 2010 edition of the code.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 17
that threshold. If there is no safe threshold, the measure must incorporate toxics best available control technology to minimize emissions. To date, CARB has established formal control measures for 11 TACs that are identified as having no safe threshold.

Under AB 2588, TAC emissions from individual facilities are quantified and prioritized by the air quality management district or air pollution control district. High-priority facilities are required to perform a health risk assessment, and if specific thresholds are exceeded, are required to communicate the results to the public through notices and public meetings.

CARB has promulgated the following specific rules to limit TAC emissions:
 13 CCR Chapter 10 Section 2485: Airborne Toxic Control Measure to Limit Diesel-Fueled Commercial Motor Vehicle Idling. Generally restricts on-road diesel-powered commercial motor vehicles with a gross vehicle weight rating of greater than 10,000 pounds from idling more than five minutes.
 13 CCR Chapter 10 Section 2480: Airborne Toxic Control Measure to Limit School Bus Idling and Idling at Schools. Generally restricts a school bus or transit bus from idling for more than five minutes when within 100 feet of a school.
 13 CCR Section 2477 and Article 8: Airborne Toxic Control Measure for In-Use Diesel-Fueled Transport Refrigeration Units (TRU) and TRU Generator Sets and Facilities Where TRUs Operate. Regulations established to control emissions associated with diesel-powered TRUs.

AB 617, Community Air Protection Program
AB 617 (C. Garcia, Chapter 136, Statutes of 2017) requires local air districts to monitor and implement air pollution control strategies that reduce localized air pollution in communities that bear the greatest burdens. In response to AB 617, CARB has established the Community Air Protection Program.

Air districts are required to host workshops to help identify disadvantaged communities disproportionately affected by poor air quality. Once the criteria for identifying the highest priority locations have been identified and the communities have been selected, new community monitoring systems would be installed to track and monitor community-specific air pollution goals. In 2018 CARB prepared an air monitoring plan (Community Air Protection Blueprint), that evaluates the availability and effectiveness of air monitoring technologies and existing community air monitoring networks. Under AB 617, the Blueprint is required to be updated every five years.

Under AB 617, CARB is also required to prepare a statewide strategy to reduce TACs and criteria pollutants in impacted communities; provide a statewide clearinghouse for best available retrofit control technology; adopt new rules requiring the latest best available retrofit control technology for all criteria pollutants for which an area has not achieved attainment of California AAQS; and provide uniform, statewide reporting of emissions inventories. Air districts are required to adopt a community emissions reduction program to achieve reductions for the communities impacted by air pollution that CARB identifies.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 18 ends

2.1.2.2 SAN JOAQUIN VALLEY AIR POLLUTION CONTROL DISTRICT The state is divided into air pollution control districts/air quality management districts. These agencies are county or regional governing authorities that have primary responsibility for controlling air pollution from stationary sources. CARB and local air districts are also responsible for developing clean air plans to demonstrate how and when California will attain AAQS established under both the federal and California Clean Air Acts. For the areas in California that have not attained air quality standards, CARB works with air districts to develop and implement state and local attainment plans. In general, attainment plans contain a discussion of ambient air quality data and trends; a baseline emissions inventory; future year projections of emissions, which account for growth projections and already adopted control measures; a comprehensive control strategy of additional measures needed to reach attainment; an attainment demonstration, which generally involves complex modeling; and contingency measures. Plans may also include interim milestones for progress toward attainment. The SJVAB is managed by the SJVAPCD.

The primary role of SJVAPCD is to develop plans and implement control measures in the SJVAB to control air pollution. These controls primarily affect stationary sources such as industry and power plants. Rules and regulations have been developed by SJVAPCD to control air pollution from a wide range of air pollution sources. SJVAPCD also provides uniform procedures for assessing potential air quality impacts of projects and for preparing the air quality section of environmental documents.

Air Quality Management Planning
The EPA requires states that have areas that do not meet the National AAQS to prepare and submit air quality plans showing how the National AAQS will be met. If the states cannot show how the National AAQS will be met, then the states must show progress toward meeting the National AAQS. These plans are referred to as the State Implementation Plans (SIP). CARB requires regions that do not meet California AAQS for ozone to submit clean air plans that describe measures to attain the standard or show progress toward attainment. The following describes the air quality management plans (AQMP) prepared by the SJVAPCD, which are incorporated by reference per CEQA Guidelines Section 15150:
 2022 Plan for the 2015 8-Hour Ozone Standard. SJVAPCD adopted the 2022 plan for the 2015 8-hour ozone standard in December 2022. This plan satisfies CAA requirements and ensures expeditious attainment of the 70 parts per billion (ppb) 8-hour ozone standard.  2016 Plan for the 2008 8-Hour Ozone Standard. SJVAPCD adopted the 2016 plan for the 2008 8-hour ozone standard in June 2016. This plan satisfies CAA requirements and ensures expeditious attainment of the 75 ppb 8-hour ozone standard (SJVAPCD 2016a, 2026a).  2014 Reasonably Available Control Technology (RACT) SIP. SJVAPCD adopted the RACT demonstration for ozone SIP in June 2014 (SJVAPCD 2014, 2026a).  2013 Plan for the Revoked 1-Hour Ozone Standard. SJVAPCD adopted the 2013 Plan for the Revoked 1-hour ozone standard in September 2013. In 2013, the Valley had zero violations of the 1-hour federal ozone standard. On May 6, 2014 and July 13, 2015 SJVAPCD submitted formal requests that the EPA

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 19
determine that the Valley has attained the federal 1-hour ozone standard. On July 18, 2016, the EPA published in the Federal Register a final action determining that the San Joaquin Valley has attained the 1-hour ozone National AAQS (SJVAPCD 2013, 2026a).
 2009 Reasonably Available Control Technology (RACT) SIP. SJVAPCD adopted the RACT demonstration for ozone SIP in April 2009 (SJVAPCD 2009a, 2026a).  2007 Ozone Plan. SJVAPCD adopted the 2007 Ozone Plan in April 2007. This plan addresses the EPA’s 8-hour ozone standard of 84 ppb, which was established in 1997 (SJVAPCD 2007a, 2026a).  2015 8-Hour Ozone Standard. The EPA set the National AAQS for 8-hour ozone at 70 ppb effective December 28, 2015. The EPA designated the San Joaquin Valley as Extreme nonattainment for this standard in August 2018, with an attainment deadline of 2037. SJVACPD is mandated under federal CAA requirements to develop a new attainment plan for the revised ozone standard by 2022. Despite the significant air quality progress that has been made in the Valley, addressing the 2015 8-hour ozone standard will pose a challenge for the San Joaquin Valley given the naturally high background ozone levels and ozone transport into the Valley. Significant further emissions reductions will be needed to come into attainment of the stringent new standard. This will require concerted ongoing effort by the SJVAPCD working closely with Valley residents, businesses, and other stakeholders to continue implementing effective and efficient air quality measures. The attainment plan for the 2015 federal ozone standard will build upon comprehensive strategies already in place from adopted SJVAPCD plans and CARB statewide strategies.

The NOx reduction commitments from the recent 2018 PM2.5 Plan, 2016 Ozone Plan, and other ongoing measures will assist the Valley in meeting the 70 ppb federal ozone standard. Strategies for attainment of the 2015 8-hour ozone standard will be developed through a public process, building on decades of effective control strategies (SJVAPCD 2026a).
 2018 Plan for the 1997, 2006, and 2012 PM2.5 Standards. SJVAPCD adopted the 2018 Plan for the 1997, 2006, and 2012 PM2.5 Standards on November 15, 2018. This plan addresses the EPA federal 1997 annual PM2.5 standard of 15 μg/m³ and 24-hour PM2.5 standard of 65 μg/m³, the 2006 24-hour PM2.5 standard of 35 μg/m³, and the 2012 annual PM2.5 standard of 12 μg (SJVAPCD 2018, 2026a).  2016 Moderate Area Plan for the 2012 PM2.5 Standard. SJVAPCD adopted the 2016 Moderate Area Plan for the 2012 PM2.5 standard on September 15, 2016. This plan addresses the EPA federal annual PM2.5 standard of 12 µg/m3, established in 2012. This plan includes an attainment impracticability demonstration and request for reclassification of the Valley from Moderate nonattainment to Serious nonattainment (SJVAPCD 2016b, 2026a).
 2015 Plan for the 1997 PM2.5 Standard. SJVAPCD adopted the 2015 Plan for the 1997 PM2.5 standard on April 16, 2015. This plan addresses the EPA’s annual PM2.5 standard of 15 µg/m3 and 24-hour PM2.5 standard of 65 µg/m3, established in 1997 (SJVAPCD 2015a, 2026a).  2012 PM2.5 Plan. SJVAPCD adopted the 2012 PM2.5 Plan in December 2012. This plan addresses the EPA’s 24-hour PM2.5 standard of 35 µg/m³, which was established by in 2006 (SJVAPCD 2012, 2026a).

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 20 ends

 2008 PM2.5 Plan. SJVAPCD adopted the 2008 PM2.5 Plan in April 2008. This plan addresses the EPA’s annual PM2.5 standard of 15 µg/m³, which was established in 1997 (SJVAPCD 2008, 2026a).  2007 PM10 Maintenance Plan. SJVAPCD adopted the 2007 PM10 Maintenance Plan in September 2007 to ensure the San Joaquin Valley’s continued attainment of the EPA’s PM10 standard. The EPA designated the Valley as an attainment/maintenance area for PM10 (SJVAPCD 2007b, 2026a).  2004 Revision to the California SIP for Carbon Monoxide. On July 22, 2004, CARB approved an update to the SIP that shows how the ten areas will maintain the standard through 2018, revises emission estimates, and establishes new on-road motor vehicle emission budgets for transportation conformity purposes (CARB 2004).

SJVAPCD Local Rules and Regulations
Assembly Bill 170, Reyes
AB 170 was adopted by State lawmakers in 2003, creating Government Code Section 65302.1, which requires cities and counties in the San Joaquin Valley to amend their general plans to include data, analysis, and comprehensive goals, policies, and feasible implementation strategies designed to improve air quality. The elements to be amended include, but are not limited to, the elements dealing with land use, circulation, housing, conservation, and open space. Section 65302.1.c identifies four areas of air quality discussion required in these amendments:
 A report describing local air quality conditions, attainment status, and State and federal air quality and transportation plans.
 A summary of local, district, State, and federal policies, programs, and regulations to improve air quality.  A comprehensive set of goals, policies, and objectives to improve air quality.  Feasible implementation measures designed to achieve these goals.

Rule 9510: Indirect Source Review
On December 15, 2005, SJVAPCD adopted the Indirect Source Review Rule (or Rule 9510) to reduce ozone precursors (i.e., VOC and NOX) and PM10 emissions from new land use development projects. Specifically, Rule 9510 targets the indirect emissions from vehicles and construction equipment associated with these projects and applies to both construction- and operational-related impacts. The rule applies to any applicant that seeks to gain a final discretionary approval for a development project, or any portion thereof, which upon full buildout would include any one of the following:
 50 residential units.
 2,000 square feet of commercial space.
 25,000 square feet of light industrial space.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 21
 100,000 square feet of heavy industrial space.
 20,000 square feet of medical office space.
 39,000 square feet of general office space.
 9,000 square feet of educational space.
 10,000 square feet of government space.
 20,000 square feet of recreational space.
 9,000 square feet of space not identified above.
 Transportation/transit projects with construction exhaust emissions of 2 or more tons of NOx or 2 or more tons of PM10.
 Residential projects on contiguous or adjacent property under common ownership of a single entity, in whole or in part, that is designated and zoned for the same development density and land use, regardless of the number of tract maps, and has the capability of accommodating more than 50 residential units.  Nonresidential projects on contiguous or adjacent property under common ownership of a single entity, in whole or in part, that is designated and zoned for the same development density and land use, and has the capability of accommodating development projects that emit 2 or more tons per year of NOX or PM10 during project operations.

The rule requires all subject, nonexempt projects 2 to mitigate both construction and operational period emissions by (1) applying feasible SJVAPCD-approved mitigation measures, or (2) paying any applicable fees to support programs that reduce emissions. Off-site emissions reduction fees (off-site fees) are required for projects that do not achieve the required emissions reductions through on-site emission reduction measures.

Phased projects can defer payment of fees in accordance with an Offsite Emissions Reduction Fee Deferral Schedule (FDS) approved by the SJVAPCD.

To determine how an individual project would satisfy Rule 9510, each project would submit an air quality impact assessment (AIA) to the SJVAPCD as early as possible, but no later than prior to the project’s final discretionary approval, to identify the project’s baseline unmitigated emissions inventory for indirect sources: on-site exhaust emissions from construction activities and operational activities from mobile and area sources of emissions (excludes fugitive dust and permitted sources). 3 Rule 9510 requires the following reductions, which are levels that the SJVAPCD has identified as necessary, based on its air quality management plans, to reach attainment for ozone and particulate matter.
2 Development projects that have a mitigated baseline below 2 tons per year of NOX and 2 tons per year of PM10 are exempt. 3 Stationary sources of air pollutant emissions are covered separately under SJVAPCD’s Rule 2201, New and Modified Stationary Source Review.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 22 ends

 Construction Equipment Emissions. The exhaust emissions for construction equipment greater than 50 horsepower (hp) used or associated with the development project shall be reduced by the following amounts from the statewide average as estimated by CARB:
 20 percent of the total NOX emissions
 45 percent of the total PM10 exhaust emissions
Mitigation measures may include those that reduce construction emissions on-site by using less-polluting construction equipment, which can be achieved by utilizing add-on controls; cleaner fuels; or newer, lower-emitting equipment.  Operational Emissions
 NOx Emissions. Applicants shall reduce 33.3 percent of the project’s operational baseline NOX emissions over a period of 10 years as quantified in the approved AIA.  PM10 Emissions. Applicants shall reduce of 50 percent of the project’s operational baseline PM10 emissions over a period of 10 years as quantified in the approved AIA. Mitigation measures may include those that reduce construction emissions on-site by using less-polluting construction equipment, which can be achieved by utilizing add-on controls; cleaner fuels; or newer, lower-emitting equipment.

These requirements can be met through any combination of on-site emission reduction measures. In the event that a project cannot achieve the above standards through imposition of mitigation measures, the project would be required to pay the applicable off-site fees. These fees are used to fund various incentive programs that cover the purchase of new equipment, engine retrofit, and education and outreach.

Rule 2201: New and Modified Stationary Source Review
SJVAPCD adopted Rule 2201, New and Modified Stationary Source Review, to control emissions from new stationary sources and all modifications to existing stationary sources that are subject to SJVAPCD’s permit requirements (i.e., “permit projects” for which the SJVAPCD is the lead agency). Permit projects that exceed the Source Performance Standards are required to install Best Available Control Technology to control emissions to the maximum extent practicable.

Regulation VIII: Fugitive PM10 Prohibitions
SJVAPCD controls fugitive PM10 through Regulation VIII, Fugitive PM10 Prohibitions. The purpose of this regulation is to reduce ambient concentrations of PM10 and PM2.5 by requiring actions to prevent, reduce, or mitigate anthropogenic (human caused) fugitive dust emissions.  Regulation VIII, Rule 8021, applies to any construction, demolition, excavation, extraction, and other earthmoving activities, including but not limited to land clearing, grubbing, scraping, travel on-site, and travel on access roads to and from the site.
 Regulation VIII, Rule 8031, applies to the outdoor handling, storage, and transport of any bulk material.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 23
 Regulation VIII, Rule 8041, applies to sites where carryout or trackout has occurred or may occur on paved roads or the paved shoulders of public roads.
 Regulation VIII, Rule 8051, applies to any open area having 0.5 acre or more in urban areas or 3.0 acres or more in rural areas and contains at least 1,000 square feet of disturbed surface area.  Regulation VIII, Rule 8061, applies to any new or existing public or private paved or unpaved road, road construction project, or road modification project.
 Regulation VIII, Rule 8071, applies to any unpaved vehicle/equipment traffic area.  Regulation VIII, Rule 8081, applies to off-field agricultural sources.

Sources regulated are required to provide Dust Control Plans that meet the regulation requirements. Under Rule 8021, a Dust Control Plan is required for any residential project that will include 10 or more acres of disturbed surface area, a nonresidential project with 5 or more acres of disturbed surface area, or a project that relocates 2,500 cubic yards per day of bulk materials for at least three days. The Dust Control Plan is required to be submitted to SJVAPCD prior to the start of any construction activity. The Dust Control Plan must also describe fugitive dust control measure to be implemented before, during, and after any dust-generating activity.

For sites smaller than those listed above, the project is still required to notify SJVAPCD a minimum of 48 hours prior to commencing earthmoving activities.

Rule 4102: Nuisance Odors
The SJVAPCD controls nuisance odors through implementation of Rule 4102, Nuisance. Pursuant to this rule, ... a person shall not discharge from any source whatsoever such quantities of air contaminants or other materials which cause injury, detriment, nuisance or annoyance to any considerable number of persons or to the public or which endanger the comfort, repose, health, or safety of any such person or the public or which cause or have a natural tendency to cause injury or damage to business or property.

Rule 9410: Employer Based Trip Reduction Program
The SJVAPCD has implemented Rule 9410, Employer Based Trip Reduction. The purpose of this rule is to reduce vehicle miles traveled (VMT) from private vehicles used by employees to commute to and from their worksites to in turn reduce emissions of NOx, VOC, and particulate matter (PM10 and PM2.5). The rule applies to employers with at least 100 eligible employees. Employers are required to implement an Employer Trip Reduction Implementation Plan (eTRIP) for each worksite with 100 or more eligible employees to meet applicable targets specified in the rule. Employers are required to facilitate the participation of the development of eTRIPs by providing information to their employees explaining the requirements and applicability of this rule. Employers are required to prepare and submit an eTRIP for each worksite to SJVAPCD. The eTRIP must be updated annually. Under this rule, employers shall collect information on the modes of transportation used for each eligible employee’s commutes both to and from work for every day of the commute verification period, as defined by using either the mandatory commute verification method or a representative survey method.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 24 ends

Annual reporting includes the results of the commute verification for the previous calendar year along with the measures implemented as outlined in the eTRIP and, if necessary, any updates to the eTRIP.

2.2 GREENHOUSE GAS EMISSIONS

2.2.1 Environmental Background
Scientists have concluded that human activities are contributing to global climate change by adding large amounts of heat-trapping gases, known as GHGs, to the atmosphere. The primary source of these GHGs is fossil fuel use. The Intergovernmental Panel on Climate Change (IPCC) has identified four major GHGs— water vapor, carbon dioxide (CO2), methane (CH4), and ozone (O3)—that are the likely cause of an increase in global average temperatures observed in the 20th and 21st centuries. Other GHGs identified by the IPCC that contribute to global warming to a lesser extent are nitrous oxide (N2O), sulfur hexafluoride (SF6), hydrofluorocarbons, perfluorocarbons, and chlorofluorocarbons (IPCC 2001).4, 5 The major GHGs are briefly described below.
 Carbon dioxide (CO2) enters the atmosphere through the burning of fossil fuels (oil, natural gas, and coal), solid waste, trees and wood products, and respiration, and also as a result of other chemical reactions (e.g., manufacture of cement). Carbon dioxide is removed from the atmosphere (sequestered) when it is absorbed by plants as part of the biological carbon cycle.  Methane (CH4) is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices and from the decay of organic waste in municipal landfills and water treatment facilities.
 Nitrous oxide (N2O) is emitted during agricultural and industrial activities as well as during the combustion of fossil fuels and solid waste.

GHGs are dependent on the lifetime, or persistence, of the gas molecule in the atmosphere. Some GHGs have a stronger greenhouse effect than others. These are referred to as high global warming potential (GWP) gases.

The GWP of GHG emissions are shown in Table 4, GHG Emissions and Their Relative Global Warming Potential Compared to CO2. The GWP is used to convert GHGs to CO2-equivalence (CO2e) to show the relative potential that different GHGs have to retain infrared radiation in the atmosphere and contribute to the greenhouse 4 Water vapor (H2O) is the strongest GHG and the most variable in its phases (vapor, cloud droplets, ice crystals). However, water vapor is not considered a pollutant, because it is considered part of the feedback loop rather than a primary cause of change. 5 Black carbon contributes to climate change both directly, by absorbing sunlight, and indirectly, by depositing on snow (making it melt faster) and by interacting with clouds and affecting cloud formation. Black carbon is the most strongly light-absorbing component of particulate matter emitted from burning fuels such as coal, diesel, and biomass. Reducing black carbon emissions globally can have immediate economic, climate, and public health benefits. California has been an international leader in reducing emissions of black carbon, with close to 95 percent control expected by 2020 due to existing programs that target reducing particulate matter from diesel engines and burning activities (CARB 2017a). However, state and national GHG inventories do not include black carbon yet due to ongoing work resolving the precise global warming potential of black carbon. Guidance for CEQA documents does not yet include black carbon.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 25
effect. For example, under IPCC’s Fifth Assessment Report (AR5), GWP values for CH4, 10 metric tons (MT) of CH4 would be equivalent to 280 MT of CO2.

Table 4 GHG Emissions and Their Relative Global Warming Potential Compared to CO2 GHGs Carbon Dioxide (CO2) Methane1 (CH4) Nitrous Oxide (N2O) Fourth Assessment
Global Warming Potential Relative to CO2
2 1 25 298
Fifth Assessment
Global Warming Potential Relative to CO2
2 1 28 265
Sixth Assessment
Global Warming Potential Relative to CO2
2 1 30 273
Source: IPCC 2007, 2013, and 2023.

Notes: The IPCC published updated GWP values in its Sixth Assessment Report (AR6) that reflect latest information on atmospheric lifetimes of GHGs and an improved calculation of the radiative forcing of CO2. However, GWP values identified in AR5 are used by the 2022 Scoping Plan for long-term emissions forecasting.
1 The methane GWP includes direct effects and indirect effects due to the production of tropospheric ozone and stratospheric water vapor. The indirect effect due to the production of CO2 is not included. 2 Based on 100 year time horizon of the GWP of the air pollutant compared to CO2.

2.2.1.1 CALIFORNIA’S GREENHOUSE GAS SOURCES AND RELATIVE CONTRIBUTION In 2025, the statewide GHG emissions inventory was updated for 2000 to 2023 emissions using the GWPs in IPCC’s AR4 and reported that California produced 360.4 MMTCO2e GHG emissions in 2023 (3.0 percent lower than 2022 levels). Since peak levels in 2004, California’s GHG emissions have generally followed a decreasing trend. By 2014, statewide GHG emissions dropped below the 2020 GHG limit (AB 32 target for year 2020) and have remained below that limit ever since. Additionally, the carbon intensity of California’s economy (the amount of carbon pollution per million dollars of gross state product) is declining (CARB 2025b).

California’s transportation sector remains the largest source of GHG emissions, producing 37.1 percent of the state’s total emissions. Industrial sector emissions make up 18.6 percent, and electric power generation make up 15.9 percent of the state’s emissions inventory. Other major sectors of GHG emissions include residential and commercial (12.0 percent), agriculture and forestry (8.1 percent), high GWP emissions (5.9 percent), and recycling and waste (2.4 percent).

Emissions from the transportation sector (e.g., on-road vehicles) have generally decreased since their peak in 2002, but this sector has experienced periods of growth and decline. A decrease through 2023 was primarily due to reductions from on-road sources, likely from an increased use in EVs and more fuel-efficient vehicles over that timeframe, and the subsequent decrease in the amount of fuel used. Electricity emissions also have decreased since the early 2000s due to the deployment of renewable and less carbon-intensive resources, leading to reduced dependence on fossil-fuel electricity generation. Emissions from the industrial sector decreased from 2022, largely due to the continued downward trend in oil and gas production (CARB 2025b).

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 26 ends

2.2.1.2 HUMAN INFLUENCE ON CLIMATE CHANGE
For approximately 1,000 years before the Industrial Revolution, the amount of GHGs in the atmosphere remained relatively constant. During the 20th century, however, scientists observed a rapid change in the climate and the quantity of climate change pollutants in the Earth’s atmosphere that is attributable to human activities.

The recent IPCC Sixth Assessment Report (AR6) summarizes the latest scientific consensus on climate change.

It finds that atmospheric concentrations of CO2 have increased by 50 percent since the Industrial Revolution and continue to increase at a rate of two parts per million each year. By the 2030s, and no later than 2040, the world will exceed 1.5°C warming (CARB 2022). These recent changes in the quantity and concentration of climate change pollutants far exceed the extremes of the ice ages, and the global mean temperature is warming at a rate that cannot be explained by natural causes alone. Human activities are directly altering the chemical composition of the atmosphere through the buildup of climate change pollutants (CAT 2006). In the past, gradual changes in the Earth’s temperature changed the distribution of species, availability of water, and other conditions. Human activities are accelerating this process so that environmental impacts associated with climate change no longer occur in a geologic time frame but within a human lifetime (IPCC 2007).

Like the variability in the projections of the expected increase in global surface temperatures, the environmental consequences of gradual changes in the Earth’s temperature are hard to predict. Projections of climate change depend heavily upon future human activity. Therefore, climate models are based on different emission scenarios that account for historical trends in emissions and on observations of the climate record that assess the human influence of the trend and projections for extreme weather events. Climate-change scenarios are affected by varying degrees of uncertainty. For example, there are varying degrees of certainty on the magnitude of the trends for:
 Warmer and fewer cold days and nights over most land areas.  Warmer and more frequent hot days and nights over most land areas.  An increase in frequency of warm spells/heat waves over most land areas.  An increase in frequency of heavy precipitation events (or proportion of total rainfall from heavy falls) over most areas.
 Larger areas affected by drought.
 Intense tropical cyclone activity increases.
 Increased incidence of extreme high sea level (excluding tsunamis).

2.2.1.3 POTENTIAL CLIMATE CHANGE IMPACTS FOR CALIFORNIA There is at least a greater than 50 percent likelihood that global warming will reach or exceed 1.5°C in the near-term, even for the very low GHG emissions scenario (IPCC 2022). Climate change is already impacting California and will continue to affect it for the foreseeable future. For example, the average temperature in most areas of California is already 1°F (~0.56°C) higher than historical levels, and some areas have seen average

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 27
increases in excess of 2°F (~1.1°C) (CalOES 2020). The California Fourth Climate Change Assessment identifies the following climate change impacts under a business-as-usual scenario, in which no new actions are taken to curb GHG emissions:
 Annual average daily high temperatures in California are expected to rise by 2.7°F by 2040, 5.8°F by 2070, and 8.8°F by 2100 compared to observed and modeled historical conditions. These changes are statewide averages. Heat waves are projected to become longer, more intense, and more frequent.  Warming temperatures are expected to increase soil moisture loss and lead to drier seasonal conditions.

Summer dryness may become prolonged, with soil drying beginning earlier in the spring and lasting longer into the fall and winter rainy season.
 High heat increases the risk of death from cardiovascular, respiratory, cerebrovascular, and other diseases.  Droughts are likely to become more frequent and persistent through 2100. 6  Climate change is projected to increase the strength of the most intense precipitation and storm events affecting California.
 Mountain ranges in California are already seeing a reduction in the percentage of precipitation falling as snow. Snowpack levels are projected to decline significantly by 2100 due to reduced snowfall and faster snowmelt.
 Marine layer clouds are projected to decrease, though more research is needed to better understand their sensitivity to climate change.
 Extreme wildfires (i.e., fires larger than 10,000 hectares or 24,710 acres) would occur 50 percent more frequently. The maximum area burned statewide may increase 178 percent by the end of the century.  Exposure to wildfire smoke is linked to increased incidence of respiratory illness.  Sea level rise is expected to continue to increase erosion of beaches, cliffs, and bluffs. (CalOES 2020) Global climate change risks to California are shown in Table 5, Summary of GHG Emissions Risks to California, and include impacts to public health, water resources, agriculture, coastal sea level, forest and biological resources, and energy.
6 Overall, California has become drier over time, with five of the eight years of severe to extreme drought occurring between 2007 and 2016, and with unprecedented dry years in 2014 and 2015 (OEHHA 2018). Statewide precipitation has become increasingly variable from year to year, with the driest consecutive four years occurring from 2012 to 2015 (OEHHA 2018).

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 28 ends

Table 5 Summary of GHG Emissions Risks to California
Impact Category Potential Risk
Public Health Impacts Heat waves will be more frequent, hotter, and longer Fewer extremely cold nights
Poor air quality made worse
Higher temperatures increase ground-level ozone levels
Water Resources Impacts Decreasing Sierra Nevada snowpack Challenges in securing adequate water supply
Potential reduction in hydropower
Loss of winter recreation
Agricultural Impacts Increasing temperature
Increasing threats from pests and pathogens
Expanded ranges of agricultural weeds
Declining productivity
Irregular blooms and harvests
Coastal Sea Level Impacts Accelerated sea level rise
Increasing coastal floods
Shrinking beaches
Worsened impacts on infrastructure
Forest and Biological Resource Impacts Increased risk and severity of wildfires Lengthening of the wildfire season
Movement of forest areas
Conversion of forest to grassland
Declining forest productivity
Increasing threats from pest and pathogens
Shifting vegetation and species distribution
Altered timing of migration and mating habits
Loss of sensitive or slow-moving species
Energy Demand Impacts Potential reduction in hydropower Increased energy demand
Sources: CEC 2006, 2009; CCCC 2012; CNRA 2014.

2.2.2 Regulatory Setting

2.2.2.1 FEDERAL REGULATIONS
The US Environmental Protection Agency (USEPA) announced on December 7, 2009, that GHG emissions threaten the public health and welfare of the American people and that GHG emissions from on-road vehicles contribute to that threat. The USEPA’s final findings respond to the 2007 U.S. Supreme Court decision that GHG emissions fit within the Clean Air Act definition of air pollutants. The findings do not impose any emission reduction requirements, but allow the USEPA to finalize the GHG standards proposed in 2009 for new light-duty vehicles as part of the joint rulemaking with the Department of Transportation (USEPA 2009).

To regulate GHGs from passenger vehicles, the USEPA was required to issue an endangerment finding (USEPA 2025a). The finding identified emissions of six key GHGs—CO2, CH4, N2O, hydrofluorocarbons, perfluorocarbons, and SF6—that have been the subject of scrutiny and intense analysis for decades by scientists in the United States and around the world. The first three are applicable to the Proposed Project’s GHG

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 29
emissions inventory because they constitute the majority of GHG emissions and should be evaluated as part of a project’s GHG emissions inventory.

On January 20, 2025, the President of the United States signed an executive order, Unleashing American Energy, which directed the USEPA to eliminate the social cost of carbon calculation from any federal permitting or regulatory decision and submit recommendations on the legality and continued applicability of the 2009 endangerment finding, among other directives (White House 2025). On July 29, 2025, the USEPA released its proposal to rescind the 2009 endangerment finding and repeal all GHG emission standards for light-duty, medium-duty, and heavy-duty vehicles and engines pursuant to CAA Section 202(a) (USEPA 2025d). The proposed rule would remove GHG-related provisions from 40 CFR Part 600 without affecting provisions related to Corporate Average Fuel Economy (CAFE) standards and fuel economy labeling (Vol. 90 Federal Register, No. 146, 36288.). On February 12, 2026, USEPA finalized its rescission of the 2009 Greenhouse Gas Endangerment Finding.

US Mandatory Report Rule for GHGs (2009)
In response to the endangerment finding, the EPA issued the Mandatory Reporting of GHG Rule that requires substantial emitters of GHG emissions (large stationary sources, etc.) to report GHG emissions data. Facilities that emit 25,000 MTCO2e or more per year are required to submit an annual report.

Corporate Average Fuel Economy Standards
The Energy Policy and Conservation Act of 1975 was established in response to the 1973 oil crisis. The act created the Strategic Petroleum Reserve, established vehicle fuel economy standards, and prohibited the export of U.S. crude oil (with a few limited exceptions). It also created Corporate Average Fuel Economy (CAFE) standards for passenger cars starting in model year 1978. The CAFE Standards are updated periodically to account for changes in vehicle technologies, driver behavior, and/or driving conditions.

The federal government issued new CAFE standards in 2012 for model years 2017 to 2025, which required a fleet average of 54.5 miles per gallon (mpg) in 2025. On March 30, 2020, the EPA finalized updated CAFE and greenhouse gas (GHG) emissions standards for passenger cars and light trucks and established new standards covering model years 2021 through 2026, known as the Safer Affordable Fuel Efficient (SAFE) Vehicles Final Rule for Model Years 2021 to 2026. On December 21, 2021, under direction of Executive Order 13990 issued by President Biden, the National Highway Traffic Safety Administration (NHTSA) repealed SAFE Vehicles Rule Part One, which had preempted State and local laws related to fuel economy standards. In addition, on March 31, 2022, the NHTSA finalized new fuel standards that will increase fuel efficiency eight percent annually for model years 2024 to 2025 and 10 percent annually for model year 2026. Overall, the new CAFE standards require a fleet average of 49 mpg for passenger vehicles and light trucks for model year 2026, which will be a 10 mpg increase compared to model year 2021 (NHTSA 2022).

On June 7, 2024, the NHTSA announced final CAFE standards for passenger cars and light trucks built in model years 2027 to 2031 and final fuel efficiency standards for heavy-duty pickup trucks and vans built in model years 2030 to 2035. The final rules establish standards that would require an industry fleetwide average of approximately 50.4 mpg for passenger cars and light trucks in model year 2031, by increasing fuel economy by 2 percent year over year for passenger cars (model years 2027–2031) and for light trucks (model years 2029–

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 30 ends

2031). For heavy-duty pickup trucks and vans, the final rule would increase fuel efficiency at a rate of 10 percent per year (model years 2030–2032) and 8 percent per year (model years 2033–2035) (NHTSA 2024). However, the NHTSA released new proposed standards on December 3, 2025 under the SAFE Vehicle Rule III. The new proposed CAFE standards set a 0.5 percent increase in fuel efficiency per year for model year 2023 through 2026 passenger vehicle and light trucks. In addition, it also sets a 0.35 percent and 0.70 percent increase for MY 2027 passenger vehicles and light trucks, respectively, a 0.25 percent increase for MY 2028-2031 light duty vehicles, and a fuel economy standard of 34.5 MPG for MY 2031 light duty vehicles (NHTSA 2025b).

Furthermore, on June 11, 2025, the NHTSA published the final rule, “Resetting the Corporate Average Fuel Economy Program.” This interpretive rule issued by the NHTSA does not immediately change or reverse current fuel economy standards; however, the rule clarifies the NHTSA’s interpretation of its obligations for CAFE standards stemming from the Energy Policy and Conservation Act of 1975 and the Energy Independence and Security Act of 2007. The rule asserts that some regulations, such as those established under previous presidential administrations, improperly considered electric vehicles (EVs) when identifying the “maximum feasibility” average fuel economy level upon which CAFE standards are developed, thereby establishing a legal foundation for future rollbacks of CAFE standards (NHTSA 2025a).

Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles
In 2024, the USEPA issued a final rule, “Multi-Pollutant Emissions Standards for Model Years 2027 and Later Light-Duty and Medium-Duty Vehicles,” that sets new, more protective standards to reduce harmful air pollutant emissions from light-duty and medium-duty vehicles starting with MY 2027 (USEPA 2025b).

2.2.2.2 STATE LAWS
Current State of California guidance and goals for reductions in GHG emissions are generally embodied in Executive Orders (EO) S-03-05 and B-30-15, AB 32, SB 32, and SB 375.

Executive Order S-03-05
EO S-03-05, signed June 1, 2005, set the following GHG reduction targets for the state:
 2000 levels by 2010
 1990 levels by 2020
 80 percent below 1990 levels by 2050
Assembly Bill 32, the Global Warming Solutions Act (2006) Commonly known as its legislative bill number (AB 32), this act was signed August 31, 2006, to reduce California’s contribution of GHG emissions. AB 32 follows the 2020 tier of emissions-reduction targets established in EO S-03-05. The California Air Resources Board (CARB) prepared the 2008 Scoping Plan to outline a plan to achieve the GHG emissions reduction targets of AB 32.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 31
Executive Order B-30-15
EO B-30-15, signed April 29, 2015, set a goal of reducing GHG emissions within the state to 40 percent of 1990 levels by year 2030. EO B-30-15 also directed CARB to update the Scoping Plan to quantify the 2030 GHG reduction goal for the state and required state agencies to implement measures to meet the interim 2030 goal as well as the long-term goal for 2050 in EO S-03-05. It required the Natural Resources Agency to conduct triennial updates of the California adaption strategy, “Safeguarding California,” to ensure climate change is accounted for in state planning and investment decisions.

Senate Bill 32 and Assembly Bill 197
In September 2016, Governor Brown signed Senate Bill 32 and Assembly Bill 197, making the Executive Order goal for year 2030 into a statewide, mandated legislative target. AB 197 established a joint legislative committee on climate change policies and requires CARB to prioritize direction emissions reductions rather than the market-based cap-and-trade program for large stationary, mobile, and other sources.

Executive Order B-55-18
EO B-55-18, signed September 10, 2018, sets a goal “to achieve carbon neutrality as soon as possible, and no later than 2045, and achieve and maintain net negative emissions thereafter.” EO B-55-18 directs CARB to work with relevant State agencies to ensure future Scoping Plans identify and recommend measures to achieve the carbon neutrality goal. The goal of carbon neutrality by 2045 is in addition to other statewide goals, meaning not only should emissions be reduced to 80 percent below 1990 levels by 2050, but that, by no later than 2045, the remaining emissions should be offset by equivalent net removals of CO2e from the atmosphere, including through sequestration in forests, soils, and other natural landscapes.

Assembly Bill 1279
On August 31, 2022, the California Legislature passed AB 1279, which requires California to achieve net-zero GHG emissions no later than 2045 and to achieve and maintain negative GHG emissions thereafter.

Additionally, AB 1279 also establishes a GHG emissions reduction goal of 85 percent below 1990 levels by 2045. CARB will be required to update the scoping plan to identify and recommend measures to achieve the net-zero and GHG emissions-reduction goals.
2022 Scoping Plan Update
CARB adopted the 2022 Scoping Plan for Achieving Carbon Neutrality (2022 Scoping Plan) on December 15, 2022, which lays out a path to achieve carbon neutrality by 2045 or earlier and to reduce the state’s anthropogenic GHG emissions (CARB 2022). The Scoping Plan was updated to address the carbon neutrality goals of EO B-55-18 (discussed below) and the ambitious GHG reduction target as directed by AB 1279. Previous Scoping Plans focused on specific GHG reduction targets for our industrial, energy, and transportation sectors—to meet 1990 levels by 2020, and then the more aggressive 40 percent below that for the 2030 target. This plan expands upon earlier Scoping Plans with a target of reducing anthropogenic emissions to 85 percent below 1990 levels by 2045. Carbon neutrality takes it one step further by expanding actions to capture and store carbon, including through natural and working lands and mechanical technologies, while drastically reducing anthropogenic sources of carbon pollution at the same time.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 32 ends

The path forward was informed by the recent Sixth Assessment Report (AR6) of the IPCC, and the measures would achieve 85 percent below 1990 levels by 2045 in accordance AB 1279. CARB’s 2022 Scoping Plan identifies strategies shown in Table 6, Priority Strategies for Local Government Climate Action Plans, that would be most impactful at the local level for ensuring substantial process towards the State’s carbon neutrality goals.

Table 6 Priority Strategies for Local Government Climate Action Plans Priority Area Priority Strategies
Transportation Electrification
Convert local government fleets to zero-emission vehicles (ZEV) and provide EV charging at public sites.

Create a jurisdiction-specific ZEV ecosystem to support deployment of ZEVs statewide (such as building standards that exceed state building codes, permit streamlining, infrastructure siting, consumer education, preferential parking policies, and ZEV readiness plans).

VMT Reduction
Reduce or eliminate minimum parking standards.

Implement Complete Streets policies and investments, consistent with general plan circulation element requirements.

Increase access to public transit by increasing density of development near transit, improving transit service by increasing service frequency, creating bus priority lanes, reducing or eliminating fares, microtransit, etc.

Increase public access to clean mobility options by planning for and investing in electric shuttles, bike share, car share, and walking
Implement parking pricing or transportation demand management pricing strategies.

Amend zoning or development codes to enable mixed-use, walkable, transit-oriented, and compact infill development (such as increasing allowable density of the neighborhood).

Preserve natural and working lands by implementing land use policies that guide development toward infill areas and do not convert “greenfield” land to urban uses (e.g., green belts, strategic conservation easements)
Building Decarbonization
Adopt all-electric new construction reach codes for residential and commercial uses.

Adopt policies and incentive programs to implement energy efficiency retrofits for existing buildings, such as weatherization, lighting upgrades, and replacing energy-intensive appliances and equipment with more efficient systems (such as EnergyStar-rated equipment and equipment controllers).

Adopt policies and incentive programs to electrify all appliances and equipment in existing buildings such as appliance rebates, existing building reach codes, or time of sale electrification ordinances.

Facilitate deployment of renewable energy production and distribution and energy storage on privately owned land uses (e.g., permit streamlining, information sharing).

Deploy renewable energy production and energy storage directly in new public projects and on existing public facilities (e.g., solar photovoltaic systems on rooftops of municipal buildings and on canopies in public parking lots, battery storage systems in municipal buildings).

Source: CARB 2022.

For residential and mixed-use development projects, CARB recommends this first approach to demonstrate that these land use development projects are aligned with State climate goals based on the attributes of land use development that reduce operational GHG emissions while simultaneously advancing fair housing.

Attributes that accommodate growth in a manner consistent with the GHG and equity goals of SB 32 have all the following attributes:
 Transportation Electrification
 Provide EV charging infrastructure that, at a minimum, meets the most ambitious voluntary standards in the California Green Building Standards Code at the time of project approval.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 33
 VMT Reduction
 Is located on infill sites that are surrounded by existing urban uses and reuses or redevelops previously undeveloped or underutilized land that is presently served by existing utilities and essential public services (e.g., transit, streets, water, sewer).
 Does not result in the loss or conversion of the State’s natural and working lands.  Consists of transit-supportive densities (minimum of 20 residential dwelling units/acre) or is in proximity to existing transit stops (within a half mile) or satisfies more detailed and stringent criteria specified in the region’s Sustainable Communities Strategy (SCS).  Reduces parking requirements by:
- Eliminating parking requirements or including maximum allowable parking ratios (i.e., the ratio of parking spaces to residential units or square feet); or - Providing residential parking supply at a ratio of <1 parking space per dwelling unit; or - For multifamily residential development, requiring parking costs to be unbundled from costs to rent or own a residential unit.
 At least 20 percent of the units are affordable to lower-income residents;  Result in no net loss of existing affordable units.
 Building Decarbonization
 Use all electric appliances without any natural gas connections and does not use propane or other fossil fuels for space heating, water heating, or indoor cooking (CARB 2022).

The second approach to project-level alignment with state climate goals is net zero GHG emissions, especially for new residential projects. The third approach to demonstrating project-level alignment with State climate goals is to align with GHG thresholds of significance, which many local air quality management and air pollution control districts have developed or adopted (CARB 2022).

Senate Bill 375
In 2008, SB 375, the Sustainable Communities and Climate Protection Act, was adopted to connect the GHG emissions reductions targets established in the 2008 Scoping Plan for the transportation sector to local land use decisions that affect travel behavior. Its intent is to reduce GHG emissions from light-duty trucks and automobiles (excludes emissions associated with goods movement) by aligning regional long-range transportation plans, investments, and housing allocations to local land use planning to reduce VMT and vehicle trips. Specifically, SB 375 required CARB to establish GHG emissions reduction targets for each of the 18 metropolitan planning organizations (MPO). The Kern Council of Governments (Kern COG) is the MPO for the County of Kern and its 11 incorporated cities, including Bakersfield.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 34 ends

Pursuant to the recommendations of the Regional Transportation Advisory Committee, CARB adopted per capita reduction targets for each of the MPOs rather than a total magnitude reduction target. CARB is required to update the targets for the MPOs every eight years. In June 2017, CARB released updated targets and technical methodology, and then released another update in February 2018, which became effective in October 2018.

CARB staff began the target update process in 2024 with a public workshop and plans to conclude it in 2026 with Board approval of the new targets (CARB 2025a).

The updated targets consider the need to further reduce VMT, as identified in the 2017 Scoping Plan Update, while balancing the need for additional and more flexible revenue sources to incentivize positive planning and action toward sustainable communities. The updated SB 375 targets are in units of percent per capita reduction in GHG emissions from automobiles and light trucks compared to 2005. This excludes reductions anticipated from implementation of State technology and fuels strategies and any potential future State strategies such as statewide road user pricing. The updated targets call for greater per-capita GHG emission reductions from SB 375 than were currently in place, which for 2035 translates into updated targets that either match or exceed the emission reduction levels in the MPOs’ currently adopted SCSs. CARB’s updated targets result in an additional reduction of over 8 MMTCO2e in 2035 compared to the prior targets (CARB 2018).

Kern COG’s Regional Transportation Plan/Sustainable Communities Strategy The Kern COG 2022 Regional Transportation Plan/Sustainable Communities Strategy (2022 RTP/SCS), which covers a 24-year period, is the latest adopted RTP/SCS and integrates transportation, land use, and housing in the planning process (Kern COG 2022). The 2022 RTP/SCS provides the foundation for transportation decisions by local, regional, and state officials; documents the region’s mobility needs and issues; identifies and attempts to resolve regional issues and provide policy and direction for local transportation plans; documents the region’s goals, policies, and objectives for meeting current and future transportation mobility needs; defines an action plan to address transportation issues and needs, consistent with regional and state policies; identifies transportation improvements in sufficient detail to aid in the development of the state transportation improvement program and to be useful in making decisions related to the development and growth of the region; identifies the agencies responsible for implementing action plans; and documents the region’s financial resources needed to meet mobility needs. Overall, the 2022 RTP/SCS identifies that the Kern COG region will meet its per capita targets for both 2020 and 2035 at 9 percent and 15 percent, respectively (Kern COG 2022). The Kern COG is currently preparing the 2026 RTP/SCS, which would replace the 2022 RTP/SCS once adopted.

Transportation Sector–Specific Regulations
Assembly Bill 1493
California vehicle GHG emission standards were enacted under AB 1493 (Pavley I). Pavley I is a clean-car standard that reduces GHG emissions from new passenger vehicles (light-duty auto to medium-duty vehicles) from 2009 through 2016 and is anticipated to reduce GHG emissions from new passenger vehicles by 30 percent in 2016. California implements the Pavley I standards through a waiver granted to California by the EPA. In January 2012, CARB approved the Advanced Clean Cars program (formerly known as Pavley II) for model years 2017 through 2025. The program combines the control of smog, soot, and global warming gases

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 35
with requirements for greater numbers of ZE vehicles into a single package of standards. Under California’s Advanced Clean Car program, by 2025 new automobiles will emit 34 percent less global warming gases and 75 percent less smog-forming emissions. (CARB 2017c)
Executive Order S-01-07
On January 18, 2007, the state set a new low-carbon fuel standard for transportation fuels sold in the state.

EO S-01-07 sets a declining standard for GHG emissions measured in CO2e gram per unit of fuel energy sold in California. The LCFS required a reduction of 2.5 percent in the carbon intensity of California’s transportation fuels by 2015 and a reduction of at least 10 percent by 2020. In 2018, the LCFS was amended to include a year 2030 reduction goal of at least 20 percent in the carbon intensity of transportation fuels. The standard applies to refiners, blenders, producers, and importers of transportation fuels and would use market-based mechanisms to allow these providers to choose how they reduce emissions during the “fuel cycle” using the most economically feasible methods.

Executive Order B-16-2012
On March 23, 2012, the State announced that CARB, the California Energy Commission (CEC), the Public Utilities Commission, and other relevant agencies worked with the Plug-in Electric Vehicle Collaborative and the California Fuel Cell Partnership to establish benchmarks to accommodate ZE vehicles in major metropolitan areas, including infrastructure to support them (e.g., electric vehicle charging stations). The EO directed an increase in the number of ZE vehicles in California’s state fleet through the normal course of fleet replacement so that at least 10 percent of fleet purchases of light-duty vehicles would be ZE by 2015 and at least 25 percent by 2020. The EO also established a target for the transportation sector of reducing GHG emissions to 80 percent below 1990 levels.

Executive Order N-79-20
On September 23, 2020, Governor Newsom signed EO N-79-20, which sets a course to end sales of internal combustion passenger vehicles. EO N-79-20 set a statewide goal that 100 percent of in-state sales of new passenger cars and trucks will be ZE by 2035. Additionally, the fleet goals for truck are that 100 percent of drayage trucks be ZE by 2035 and 100 percent of medium- and heavy-duty vehicles in the state be ZE by 2045, where feasible. EO N-79-20 also identifies a goal for the state to transition to 100 percent ZE off-road vehicles and equipment by 2035, where feasible. Advanced Clean Cars II (ACC II) approved by CARB on August 25, 2022, codified the zero-emission vehicle transition goal established under EO-N-79-20 and set low-emission and zero-emission vehicle standards for model year 2026 through 2035 vehicles. However, on May 22, 2025, the U.S. Senate voted to revoke the waiver granted by the Biden administration for the ACC II program through congressional resolution (House Joint Resolution 88). On June 12, 2025, President Trump signed the resolution, which formally nullified ACC II. Currently, implementation of ACC II is unknown.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 36 ends

Renewables Portfolio: Carbon Neutrality Regulations
Senate Bills 1078, 107, and X1-2 and Executive Order S-14-08 A major component of California’s Renewable Energy Program is the renewables portfolio standard established under Senate Bills 1078 (Sher) and 107 (Simitian). Under the RPS, certain retail sellers of electricity were required to increase the amount of renewable energy each year by at least 1 percent and to reach at least 20 percent by December 30, 2010. EO S-14-08, signed in November 2008, expanded the State’s renewable energy standard to 33 percent renewable power by 2020. This standard was adopted by the legislature in 2011 (SB X1-2). Renewable sources of electricity include wind, small hydropower, solar, geothermal, biomass, and biogas. The increase in renewable sources for electricity production will decrease indirect GHG emissions from development projects because electricity production from renewable sources is generally considered carbon neutral.

Senate Bill 350
Senate Bill 350 (de Leon), was signed into law in September 2015. SB 350 establishes tiered increases to the RPS of 40 percent by 2024, 45 percent by 2027, and 50 percent by 2030. SB 350 also set a new goal to double the energy efficiency savings in electricity and natural gas through energy efficiency and conservation measures.

Senate Bill 100
On September 10, 2018, Governor Brown signed SB 100, which replaced the SB 350 requirement of 45 percent renewable energy by 2027 with the requirement of 50 percent by 2026 and raises California’s RPS requirements for 2030 from 50 percent to 60 percent. SB 100 also sets RPS requirements for publicly owned utilities to consist of 44 percent renewable energy by 2024, 52 percent by 2027, and 60 percent by 2030. The bill establishes an overall state policy that eligible renewable energy resources and zero-carbon resources supply 100 percent of all retail sales of electricity to California end-use customers and 100 percent of electricity procured to serve all state agencies by December 31, 2045. Under the bill, the state cannot increase carbon emissions elsewhere in the western grid or allow resource shuffling to achieve the 100 percent carbon-free electricity target.

Executive Order B-55-18
EO B-55-18, signed September 10, 2018, sets a goal “to achieve carbon neutrality as soon as possible, and no later than 2045, and achieve and maintain net negative emissions thereafter.” EO B-55-18 directs CARB to work with relevant state agencies to ensure future Scoping Plans identify and recommend measures to achieve the carbon neutrality goal. The goal of carbon neutrality by 2045 is in addition to other statewide goals, meaning not only should emissions be reduced to 80 percent below 1990 levels by 2050, but that, by no later than 2045, the remaining emissions should be offset by equivalent net removals of CO2e from the atmosphere, including through sequestration in forests, soils, and other natural landscapes.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 37
Senate Bill 1020
SB 1020 was signed into law on September 16, 2022. It requires renewable energy and zero-carbon resources to supply 90 percent of all retail electricity sales by 2035 and 95 percent by 2040. Additionally, SB 1020 requires all state agencies to procure 100 percent of electricity from renewable energy and zero-carbon resources by 2035.

Energy Efficiency Regulations
California Building Code: Building Energy Efficiency Standards Energy conservation standards for new residential and nonresidential buildings were adopted by the California Energy Resources Conservation and Development Commission (now the CEC) in June 1977 (24 California Code of Regulations [CCR] Part 6). Part 6 requires the design of building shells and building components to conserve energy. The standards are updated periodically to allow for consideration and possible incorporation of new energy-efficiency technologies and methods.

The 2022 Building Energy Efficiency Standards were adopted on August 11, 2021, and went into effect on January 1, 2023. The 2022 standards encourage efficient electric heat pumps, establish electric-ready requirements for new homes, expand solar photovoltaic (PV) and battery storage standards, strengthen ventilation standards, and more. The 2022 standards require mixed-fuel single-family homes to be electric-ready to accommodate replacement of gas appliances with electric appliances. In addition, the standards also include prescriptive PV system and battery requirements for high-rise, multifamily buildings (i.e., more than three stories) and noncommercial buildings such as hotels, offices, medical offices, restaurants, retail stores, schools, warehouses, theaters, and convention centers (CEC 2021). The 2025 Building Energy Efficiency Standards were adopted September 24, 2024, and became effective and replaced the 2022 Building Energy Efficiency Standards on January 1, 2026. Updates under the 2025 Building Energy Efficiency Standards include electric-ready requirements for some multi-family buildings and commercial kitchens and solar and battery energy storage requirements for assembly buildings including religious worship, sports, and recreational buildings.

Under the prescriptive pathway, a new development’s building design is considered the “Standard Design Building,” which represents the energy-efficiency performance of that project should it include all prescribed features (e.g., solar, battery storage) with no additional energy-efficiency features beyond what is required at minimum under the mandatory requirements and prescriptive pathway. A project may still demonstrate compliance using the performance pathway without inclusion of prescriptive features like solar or battery storage. However, that building design must match or exceed the energy efficiency performance of the Standard Design Building. For example, if a project would be required to include solar and battery storage under the prescriptive pathway, it can choose to comply with the performance pathway and not include solar and battery storage so long as it can demonstrate that it would achieve the same energy-efficiency performance as if solar and battery storage were included.

California Building Code: CALGreen
On July 17, 2008, the California Building Standards Commission adopted the nation’s first green building standards. The California Green Building Standards Code (24 CCR, Part 11), or “CALGreen,” was adopted as part of the California Building Standards Code. CALGreen established planning and design standards for

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 38 ends

sustainable site development, energy efficiency (in excess of the California Energy Code requirements), water conservation, material conservation, and internal air contaminants. 7 The mandatory provisions of CALGreen became effective January 1, 2011, and were last updated in 2025. The 2025 CALGreen standards became effective January 1, 2026.

Section 5.408 of CALGreen also requires that at least 65 percent of the nonhazardous construction and demolition waste from nonresidential construction operations be recycled and/or salvaged for reuse. 2006 Appliance Efficiency Regulations
The 2006 Appliance Efficiency Regulations (20 CCR Sections 1601–1608) were adopted by the CEC on October 11, 2006, and approved by the California Office of Administrative Law on December 14, 2006. The regulations include standards for both federally regulated appliances and non–federally regulated appliances.

Though these regulations are now often viewed as “business as usual,” they exceed the standards imposed by all other states, and they reduce GHG emissions by reducing energy demand.

Solid Waste Regulations
AB 939, Integrated Waste Management Act of 1989
California’s Integrated Waste Management Act of 1989 (AB 939) set a requirement for cities and counties throughout the state to divert 50 percent of all solid waste from landfills by January 1, 2000, through source reduction, recycling, and composting (Public Resources Code Sections 40050 et seq.). In 2008, the requirements were modified to reflect a per capita requirement rather than tonnage. To help achieve this, the act requires that each city and county prepare and submit a source reduction and recycling element. AB 939 also established the goal for all California counties to provide at least 15 years of ongoing landfill capacity.

AB 341
AB 341 (Chapter 476, Statutes of 2011) increased the statewide goal for waste diversion to 75 percent by 2020 and required recycling of waste from commercial and multifamily residential land uses. Section 5.408 of CALGreen also requires that at least 65 percent of the nonhazardous construction and demolition waste from nonresidential construction operations be recycled and/or salvaged for reuse.

AB 1327
AB 1327, the California Solid Waste Reuse and Recycling Access Act, requires areas to be set aside for collecting and loading recyclable materials in development projects (Public Resources Code Sections 42900 et seq.). The act required the California Integrated Waste Management Board to develop a model ordinance for adoption by any local agency requiring adequate areas for collection and loading of recyclable materials as part of development projects. Local agencies are required to adopt the model or an ordinance of their own. 7 The green building standards became mandatory in the 2010 edition of the code.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 39
AB 1826
In October 2014, Governor Brown signed AB 1826, requiring businesses to recycle their organic waste on and after April 1, 2016, depending on the amount of waste they generate per week. This law also required that on and after January 1, 2016, local jurisdictions across the state implement an organic waste recycling program to divert organic waste generated by businesses and multifamily residential dwellings that consist of five or more units. Organic waste means food waste, green waste, landscape and pruning waste, nonhazardous wood waste, and food-soiled paper waste that is mixed in with food waste.

Water Efficiency Regulations
SBX7-7
The 20x2020 Water Conservation Plan was issued by the Department of Water Resources (DWR) in 2010 pursuant to Senate Bill 7, which was adopted during the 7th Extraordinary Session of 2009–2010 and therefore dubbed “SBX7-7.” SBX7-7 mandated urban water conservation and authorized the DWR to prepare a plan implementing urban water conservation requirements (20x2020 Water Conservation Plan). In addition, it required agricultural water providers to prepare agricultural water management plans, measure water deliveries to customers, and implement other efficiency measures. SBX7-7 required urban water providers to adopt a water conservation target of 20 percent reduction in urban per capita water use by 2020 compared to 2005 baseline use.

AB 1881
The Water Conservation in Landscaping Act of 2006 requires local agencies to adopt the updated DWR model ordinance or an equivalent. AB 1881 also requires the CEC to consult with the DWR to adopt, by regulation, performance standards and labeling requirements for landscape irrigation equipment, including irrigation controllers, moisture sensors, emission devices, and valves to reduce the wasteful, uneconomic, inefficient, or unnecessary consumption of energy or water.

Short-Lived Climate Pollutant Strategy Reduction
Senate Bill 1383
On September 19, 2016, the Governor signed SB 1383 to supplement the GHG reduction strategies in the Scoping Plan to consider short-lived climate pollutants, including black carbon and methane. Black carbon is the light-absorbing component of fine particulate matter produced during incomplete combustion of fuels.

SB 1383 required the state board, no later than January 1, 2018, to approve and begin implementing a comprehensive strategy to reduce emissions of short-lived climate pollutants to achieve a reduction in methane by 40 percent, hydrofluorocarbon gases by 40 percent, and anthropogenic black carbon by 50 percent below 2013 levels by 2030, as specified. The bill also establishes targets for reducing organic waste in landfills. On March 14, 2017, CARB adopted the “Final Proposed Short-Lived Climate Pollutant Reduction Strategy,” which identifies the State’s approach to reducing anthropogenic and biogenic sources of short-lived climate pollutants.

Anthropogenic sources of black carbon include on- and off-road transportation, residential wood burning, fuel combustion (charbroiling), and industrial processes. According to CARB, ambient levels of black carbon in

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 40 ends

California are 90 percent lower than in the early 1960s despite the tripling of diesel fuel use (CARB 2017a). In-use on-road rules are to reduce black carbon emissions from on-road sources by 80 percent between 2000 and 2020.

2.3 ENERGY
Federal, state, and local laws, regulations, plans, or guidelines related to energy that are applicable to the proposed project are summarized in this section.

2.3.1 Regulatory Setting

2.3.1.1 FEDERAL REGULATIONS
Federal Energy Policy and Conservation Act
The Energy Policy and Conservation Act of 1975 was established in response to the 1973 oil crisis. The act created the Strategic Petroleum Reserve, established vehicle fuel economy standards, and prohibited the export of U.S. crude oil (with a few limited exceptions). It also created Corporate Average Fuel Economy (CAFE) standards for passenger cars starting in model year 1978. The CAFE Standards are updated periodically to account for changes in vehicle technologies, driver behavior, and/or driving conditions.

The federal government issued new CAFE standards in 2012 for model years 2017 to 2025, which required a fleet average of 54.5 miles per gallon (mpg) in 2025. On March 30, 2020, the EPA finalized updated CAFE and greenhouse gas (GHG) emissions standards for passenger cars and light trucks and established new standards covering model years 2021 through 2026, known as the Safer Affordable Fuel Efficient (SAFE) Vehicles Final Rule for Model Years 2021 to 2026. On December 21, 2021, under direction of Executive Order 13990 issued by President Biden, the National Highway Traffic Safety Administration (NHTSA) repealed SAFE Vehicles Rule Part One, which had preempted State and local laws related to fuel economy standards. In addition, on March 31, 2022, the NHTSA finalized new fuel standards that will increase fuel efficiency eight percent annually for model years 2024 to 2025 and 10 percent annually for model year 2026. Overall, the new CAFE standards require a fleet average of 49 mpg for passenger vehicles and light trucks for model year 2026, which will be a 10 mpg increase compared to model year 2021 (NHTSA 2022).

On June 7, 2024, National Highway Traffic Safety Administration (NHTSA) announced final CAFE standards for passenger cars and light trucks built in model years 2027 to 2031 and final fuel efficiency standards for heavy-duty pickup trucks and vans built in model years 2030 to 2035. The final rules establish standards that would require an industry fleetwide average of approximately 50.4 mpg for passenger cars and light trucks in model year 2031, by increasing fuel economy by 2 percent year over year for passenger cars (model years 2027– 2031) and for light trucks (model years 2029–2031). For heavy-duty pickup trucks and vans, the final rule would increase fuel efficiency at a rate of 10 percent per year (model years 2030–2032) and 8 percent per year (model years 2033–2035) (NHTSA 2024).

In June 2025, NHTSA published a final rule, “Resetting the Corporate Average Fuel Economy Program.” The rule identifies factors statutorily prohibited from consideration when setting maximum feasible fuel economy

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 41
standards under the Energy Policy and Conservation Act of 1975, the Energy Independence and Security Act of 2007, and other applicable law. It also describes NHTSA’s authority to bring the CAFE program into compliance with relevant statutory requirements, in accordance with the President Trump’s “Unleashing American Energy” Execute Order and the Secretary’s “Fixing the CAFE Program” Memorandum. The rule also describes NHTSA’s interpretation of its authority for a commercial medium- and heavy-duty on-highway vehicle and work truck fuel efficiency improvement program, to establish the necessary legal foundation to bring that program into compliance with law. This rule does not itself change existing CAFE or medium- and heavy-duty standards. During the rulemaking process for replacement standards, NHTSA will exercise its enforcement authority regarding all existing CAFE and medium- and heavy-duty standards in accordance with the interpretation set forth in this rulemaking (NHTSA 2025).

Energy Independence and Security Act of 2007
The Energy Independence and Security Act of 2007 (Public Law 110-140) seeks to provide the nation with greater energy independence and security by increasing the production of clean renewable fuels; improving vehicle fuel economy; and increasing the efficiency of products, buildings, and vehicles. It also seeks to improve the energy performance of the federal government. The Act set increased CAFE standards, the Renewable Fuel Standard, appliance energy efficiency standards, and building energy efficiency standards and accelerated research and development tasks on renewable energy sources (e.g., solar energy, geothermal energy), carbon capture, and sequestration (USEPA 2025c).

2.3.1.2 STATE LAWS
Warren-Alquist Act
Established in 1974, the Warren-Alquist Act created the California Energy Commission (CEC) in response to the energy crisis of the early 1970s and the state’s unsustainable growing demand for energy resources. The CEC’s core responsibilities include advancing State energy policy, encouraging energy efficiency, certifying thermal power plants, investing in energy innovation, developing renewable energy, transforming transportation, and preparing for energy emergencies. The Warren-Alquist Act is updated periodically through legislative bills to address current energy needs and issues.

Renewables Portfolio Standard
Senate Bills 1078, 107, and X1-2 and Executive Order S-14-08 The California Renewables Portfolio Standard Program was established in 2002 under SB 1078 (Sher) and 107 (Simitian). The RPS program requires investor-owned utilities, electric service providers, and community choice aggregators to increase the use of eligible renewable energy resources to 33 percent of total procurement by 2020. Initially, certain retail sellers of electricity were required to increase the amount of renewable energy each year by at least 1 percent in order to reach at least 20 percent by December 30, 2010. Executive Order S-14-08 was signed in November 2008 and expanded the state’s Renewable Energy Standard to 33 percent renewable power by 2020. This standard was adopted by the legislature in 2011 (SB X1-2). The California Public Utilities Commission is required to provide quarterly progress reports on progress toward RPS goals. This has accelerated the development of renewable energy projects throughout the state. For year 2020, the three largest

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 42 ends

retail energy utilities provided an average of 43 percent of its supplies from renewable energy sources.

Community choice aggregators provided an average of 41 percent of its supplies from renewable sources (CPUC 2021).

Senate Bill 350
Senate Bill 350 (de Leon) was signed into law September 2015. SB 350 establishes tiered increases to the RPS of 40 percent by 2024, 45 percent by 2027, and 50 percent by 2030. SB 350 also set a new goal to double the energy efficiency savings in electricity and natural gas through energy efficiency and conservation measures.

Senate Bill 100
On September 10, 2018, Governor Brown signed SB 100, which replaced the SB 350 requirements. Under SB 100, the RPS for public-owned facilities and retail sellers consist of 44 percent renewable energy by 2024, 52 percent by 2027, and 60 percent by 2030. SB 100 also established a new RPS requirement of 50 percent by 2026. The bill establishes an overall state policy that eligible renewable energy resources and zero-carbon resources supply 100 percent of all retail sales of electricity to California end-use customers and 100 percent of electricity procured to serve all state agencies by December 31, 2045. Under the bill, the state cannot increase carbon emissions elsewhere in the western grid or allow resource shuffling to achieve the 100 percent carbon-free electricity target.

Senate Bill 1020
SB 1020 was signed into law on September 16, 2022. It requires renewable energy and zero-carbon resources to supply 90 percent of all retail electricity sales by 2035 and 95 percent by 2040. Additionally, SB 1020 requires all state agencies to procure 100 percent of electricity from renewable energy and zero-carbon resources by 2035.

Energy Efficiency Regulations
California Building Code: Building Energy Efficiency Standards Energy conservation standards for new residential and nonresidential buildings were adopted by the California Energy Resources Conservation and Development Commission (now the CEC) in June 1977 (24 California Code of Regulations [CCR] Part 6). Part 6 requires the design of building shells and building components to conserve energy. The standards are updated periodically to allow for consideration and possible incorporation of new energy-efficiency technologies and methods.

The 2022 Building Energy Efficiency Standards were adopted on August 11, 2021, and went into effect on January 1, 2023. The 2022 standards encourage efficient electric heat pumps, establish electric-ready requirements for new homes, expand solar photovoltaic (PV) and battery storage standards, strengthen ventilation standards, and more. The 2022 standards require mixed-fuel single-family homes to be electric-ready to accommodate replacement of gas appliances with electric appliances. In addition, the standards also include prescriptive PV system and battery requirements for high-rise, multifamily buildings (i.e., more than three stories) and noncommercial buildings such as hotels, offices, medical offices, restaurants, retail stores, schools, warehouses, theaters, and convention centers (CEC 2021). The 2025 Building Energy Efficiency Standards

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting
May 2026 Page 43
were adopted September 24, 2024, and became effective and replaced the 2022 Building Energy Efficiency Standards on January 1, 2026. Updates under the 2025 Building Energy Efficiency Standards include electric-ready requirements for some multi-family buildings and commercial kitchens and solar and battery energy storage requirements for assembly buildings including religious worship, sports, and recreational buildings.

Under the prescriptive pathway, a new development’s building design is considered the “Standard Design Building,” which represents the energy-efficiency performance of that project should it include all prescribed features (e.g., solar, battery storage) with no additional energy-efficiency features beyond what is required at minimum under the mandatory requirements and prescriptive pathway. A project may still demonstrate compliance using the performance pathway without inclusion of prescriptive features like solar or battery storage. However, that building design must match or exceed the energy efficiency performance of the Standard Design Building. For example, if a project would be required to include solar and battery storage under the prescriptive pathway, it can choose to comply with the performance pathway and not include solar and battery storage so long as it can demonstrate that it would achieve the same energy-efficiency performance as if solar and battery storage were included.

California Building Code: CALGreen
On July 17, 2008, the California Building Standards Commission adopted the nation’s first green building standards. The California Green Building Standards Code (24 CCR, Part 11, known as “CALGreen”) was adopted as part of the California Building Standards Code. It includes mandatory requirements for new residential and nonresidential buildings throughout California. CALGreen is intended to (1) reduce GHG emissions from buildings; (2) promote environmentally responsible, cost-effective, healthier places to live and work; (3) reduce energy and water consumption; and (4) respond to the directives by the Governor. The mandatory provisions of CALGreen became effective January 1, 2011, and were last updated in 2022. The 2022 CALGreen update, which was approved as part of 2022 Energy Code became effective on January 1, 2023, and provides updates to the residential and non-residential voluntary measures.

Overall, the code is established to reduce construction waste, make buildings more efficient in the use of materials and energy, and reduce environmental impact during and after construction. CALGreen contains requirements for construction site selection, stormwater control during construction, construction waste reduction, indoor water use reduction, material selection, natural resource conservation, site irrigation conservation, and more. The code provides for design options allowing the designer to determine how best to achieve compliance for a given site or building condition. The code also requires building commissioning, which is a process for verifying that all building systems (e.g., heating and cooling equipment and lighting systems) are functioning at their maximum efficiency (24 CCR Part 11).

The CEC adopted the final code language for the 2025 CALGreen standards on September 11, 2024. The 2025 CALGreen standards became effective on January 1, 2026. 2006 Appliance Efficiency Regulations
The 2006 Appliance Efficiency Regulations (20 CCR Sections 1601–1608) were adopted by the CEC on October 11, 2006, and approved by the California Office of Administrative Law on December 14, 2006. The

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

2. Regulatory Setting

Page 44 ends

regulations include standards for both federally regulated appliances and non–federally regulated appliances.

Though these regulations are now often viewed as “business as usual,” they exceed the standards imposed by all other states, and they reduce GHG emissions by reducing energy demand.

May 2026 Page 45

3. Environmental Setting

3.1 SAN JOAQUIN VALLEY AIR BASIN
The proposed project is in the central portion of the SJVAB. SJVAB consists of eight counties: Fresno, Kern (western and central), Kings, Tulare, Madera, Merced, San Joaquin, and Stanislaus. Air pollution from significant activities in the SJVAB includes a variety of industrial-based sources as well as on- and off-road mobile sources.

These sources, coupled with geographical and meteorological conditions unique to the area, stimulate the formation of unhealthy air.

The SJVAB is approximately 250 miles long and an average of 35 miles wide. It is bordered by the Sierra Nevada in the east, the Coast Ranges in the west, and the Tehachapi mountains in the south. There is a slight downward elevation gradient from Bakersfield in the southeast end (elevation 408 feet) to sea level at the northwest end where the valley opens to the San Francisco Bay at the Carquinez Straits. At its northern end is the Sacramento Valley, which makes up the northern half of California’s Central Valley. The bowl-shaped topography inhibits movement of pollutants out of the valley (SJVAPCD 2023b).

3.1.1 Climate
The SJVAB is in a Mediterranean climate zone, which is characterized by sparse rainfall, which occurs mainly in winter. Summers are hot and dry. Summertime maximum temperatures often exceed 100 degrees Fahrenheit (°F) in the valley. Winter-time high pressure events can often last many weeks, with surface temperatures often lowering to 30°F. During these events, fog can be present, and inversions are extremely strong. These wintertime inversions can inhibit vertical mixing of pollutants to a few hundred feet (SJVAPCD 2015b).

In addition, the SJVAB is influenced by a subtropical high-pressure cell for most of the year. The high-pressure cell is strongest during spring, summer, and fall and produces subsiding air, which can result in temperature inversions in the valley. A temperature inversion can act like a lid, inhibiting vertical mixing of the air mass at the surface. Any emissions of pollutants can be trapped below the inversion. Most of the surrounding mountains are above the normal height of summer inversions (1,500 to 3,000 feet) (SJVAPCD 2015b).

The climatological station nearest to the project area is the Bakersfield Airport Monitoring Station (ID No. 040442). The average low is reported at 38.5°F in January, and the average high is 98.6°F in July (WRCC 2026).

Rainfall averages 6.17 inches per year in the project area (WRCC 2026).

3.1.1.1 TEMPERATURE
Solar radiation and temperature are particularly important in the chemistry of ozone formation. The SJVAB averages over 260 sunny days per year. Photochemical air pollution (primarily ozone) is produced by the atmospheric reaction of organic substances (such as volatile organic compounds) and nitrogen dioxide under the influence of sunlight. Ozone concentrations are very dependent on the amount of solar radiation, especially

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting

Page 46 ends

during late spring, summer, and early fall. Ozone levels typically peak in the afternoon. After the sun goes down, the chemical reaction between nitrous oxide and ozone begins to dominate. This reaction tends to scavenge and remove the ozone in the metropolitan areas through the early morning hours, resulting in the lowest ozone levels, possibly reaching zero at sunrise in areas with high nitrogen oxides emissions. At sunrise, nitrogen oxides tend to peak, partly due to low levels of ozone at this time and also due to the morning commuter vehicle emissions of nitrogen oxides.

Generally, the higher the temperature, the more ozone formed, since reaction rates increase with temperature.

However, extremely hot temperatures can “lift” or “break” the inversion layer. Typically, if the inversion layer does not lift to allow the buildup of contaminants to be dispersed, the ozone levels will peak in the late afternoon. If the inversion layer breaks and the resultant afternoon winds occur, the ozone will peak in the early afternoon and decrease in the late afternoon as the contaminants are dispersed or transported out of the SJVAB. Ozone levels are low during winter periods when there is much less sunlight to drive the photochemical reaction (SJVAPCD 2015b).

3.1.1.2 WIND
Wind speed and direction play an important role in dispersion and transport of air pollutants. Wind at the surface and aloft can disperse pollution by mixing and transporting it to other locations. Winds in the valley most frequently blow from the northwest, especially during summer. The region’s topographic features restrict air movement and channel the air mass towards the southeastern end of the valley. Marine air can flow into the basin from the San Joaquin River Delta and over Altamont Pass and Pacheco Pass, where it can flow along the axis of the valley, over the Tehachapi pass, into the Southeast Desert Air Basin. This wind pattern contributes to transporting pollutants from the Sacramento Valley and the Bay Area into the SJVAB. Approximately 27 percent of the total emissions in the northern portion, 11 percent of total emissions in the central region, and 7 percent of total emission in the south valley of the SJVAB are attributed to air pollution transported from these two areas (SJVAPCD 2015b). The Coastal Range is a barrier to air movement to the west, and the high Sierra Nevada range is a significant barrier to the east (the highest peaks in the southern Sierra Nevada reach almost halfway through the Earth’s atmosphere). Many days in the winter are marked by stagnation events where winds are very weak. Transport of pollutants during winter can be very limited. A secondary but significant summer wind pattern is from the southeast and can be associated with nighttime drainage winds, prefrontal conditions, and summer monsoons.

Two significant diurnal wind cycles that occur frequently in the valley are the sea breeze and mountain-valley upslope and drainage flows. The sea breeze can accentuate the northwest wind flow, especially on summer afternoons. Nighttime drainage flows can accentuate the southeast movement of air down the valley. In the mountains during periods of weak synoptic-scale winds, winds tend to be upslope during the day and downslope at night. Nighttime and drainage flows are especially pronounced during the winter when flow from the east is enhanced by nighttime cooling in the Sierra Nevada. Eddies can form in the valley wind flow and can recirculate a polluted air mass for an extended period (SJVAPCD 2015b).

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting
May 2026 Page 47

3.1.1.3 PRECIPITATION, HUMIDITY, AND FOG
Precipitation and fog may reduce or limit some pollutant concentrations. Ozone needs sunlight for its formation, and clouds and fog can block the required solar radiation. Wet fogs can cleanse the air during winter as moisture collects on particles and deposits them on the ground. Atmospheric moisture can also increase pollution levels. In fogs with less water content, the moisture acts to form secondary ammonium nitrate particulate matter. This ammonium nitrate is part of the valley’s PM2.5 and PM10 problem. The winds and unstable air conditions during the passage of winter storms result in periods of low pollutant concentrations and excellent visibility. Between winter storms, high pressure and light winds allow cold moist air to pool on the SJVAB floor. This creates strong low-level temperature inversions and very stable air conditions, which can lead to tule fog. Wintertime conditions favorable to fog formation are also favorable to high concentrations of PM2.5 and PM10 (SJVAPCD 2015b).

3.1.1.4 INVERSIONS
The vertical dispersion of air pollutants in the San Joaquin Valley can be limited by persistent temperature inversions. Air temperature in the lowest layer of the atmosphere typically decreases with altitude. A reversal of this atmospheric state, where the air temperature increases with height, is termed an inversion. The height of the base of the inversion is known as the “mixing height.” This is the level to which pollutants can mix vertically. Mixing of air is minimized above and below the inversion base. The inversion base represents an abrupt density change where little air movement occurs.

Inversion layers are significant in determining pollutant concentrations. Concentration levels can be related to the amount of mixing space below the inversion. Temperature inversions that occur on the summer days are usually 2,000 to 2,500 feet above the valley floor. In winter months, overnight inversions occur 500 to 1,500 feet above the valley floor (SJVAPCD 2015b).

3.2 SJVAB AREA DESIGNATIONS
The air quality management plans prepared by SJVAPCD provide the framework for SJVAB to achieve attainment of the State and federal AAQS through the SIP. Areas are classified as attainment or nonattainment areas for particular pollutants depending on whether they meet the ambient air quality standards. Severity classifications for ozone nonattainment range in magnitude from marginal, moderate, and serious to severe and extreme.
 Unclassified. A pollutant is designated unclassified if the data are incomplete and do not support a designation of attainment or nonattainment.
 Attainment. A pollutant is in attainment if the AAQS for that pollutant was not violated at any site in the area during a three-year period.
 Nonattainment. A pollutant is in nonattainment if there was at least one violation of an AAQS for that pollutant in the area.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting

Page 48 ends

 Nonattainment/Transitional. A subcategory of the nonattainment designation. An area is designated nonattainment/transitional to signify that the area is close to attaining the AAQS for that pollutant.

The attainment status for the SJVAB is shown in Table 7, Attainment Status of Criteria Pollutants in the San Joaquin Valley Air Basin. Table 7 Attainment Status of Criteria Pollutants in the San Joaquin Valley Air Basin Table 7 Attainment Status of Criteria Pollutants in the San Joaquin Valley Air Basin Pollutant State Federal
Ozone – 1-hour Severe Nonattainment No Federal Standard1 Ozone – 8-hour Nonattainment Extreme Nonattainment2
PM10 Nonattainment Attainment3
PM2.5 Nonattainment Nonattainment4
CO Attainment/Unclassified Attainment/Unclassified
NO2 Attainment Attainment/Unclassified
SO2 Attainment Attainment/Unclassified
Lead Attainment No Designation/Classification
Hydrogen Sulfide Unclassified No Federal Standard
Sulfates Attainment No Federal Standard
Visibility Reducing Particles Unclassified No Federal Standard Vinyl Chloride Attainment No Federal Standard
Source: CARB 2026a; SJVAPCD 2026c.
1 Though the Valley was initially classified as serious nonattainment for the 1997 8-hour ozone standard, the EPA approved Valley reclassification to extreme nonattainment in the Federal Register on May 5, 2010 (effective June 4, 2010). 2 Effective June 15, 2005, the EPA revoked the federal 1-hour ozone standard, including associated designations and classifications. The US EPA had previously classified the SJVAB as extreme nonattainment for this standard. The US EPA approved the 2004 Extreme Ozone Attainment Demonstration Plan on March 8, 2010 (effective April 7, 2010). Many applicable requirements for extreme 1-hour ozone nonattainment areas continue to apply to the SJVAB.
3 On September 25, 2008, the EPA redesignated the San Joaquin Valley to attainment for the PM10 National AAQS and approved the PM10 Maintenance Plan.
4 The Valley is designated nonattainment for the 1997 PM2.5 National AAQS. The EPA designated the Valley as nonattainment for the 2006 PM2.5 National AAQS on November 13, 2009 (effective December 14, 2009).

3.3 EXISTING AMBIENT AIR QUALITY
Existing levels of ambient air quality and historical trends and projections in the vicinity of the proposed project site are best documented by measurements taken by the SJVAPCD. The air quality monitoring station closest to the proposed project is the Bakersfield-5558 California Avenue Monitoring Station, which is one of 29 monitoring stations SJVAPCD operates and maintains in the SJVAB. Data from this station include O3, PM10, and PM2.5 and are summarized in Table 8, Ambient Air Quality Monitoring Summary. The most current five years of data from these monitoring stations are included in Table 8 and show regular violations of the state and federal O3, state and federal PM10 standards, and federal PM2.5 standards in the last five years.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting
May 2026 Page 49
Table 8 Ambient Air Quality Monitoring Summary
Pollutant/Standard
Number of Days Thresholds Were Exceeded and
Maximum Levels1
2020 2021 2022 2023 2024
Ozone (O3)
State 1-Hour ≥ 0.09 ppm (days exceed threshold)
State & Federal 8-hour ≥ 0.070 ppm (State/Federal days exceed threshold) Max. 1-Hour Conc. (ppm)
Max. 8-Hour Conc. (ppm)
3 25/25

0.110

0.098
0 11/11

0.090

0.080
0 7/4

0.093

0.076
0 7/7

0.088

0.079
2 38/36

0.099

0.089
Nitrogen Dioxide (NO2)
State 1-Hour ≥ 0.18 ppm (days exceed threshold)
Max. 1-Hour Conc. (ppm)
0 0.0504
0 0.0572
0 0.0536
0 0.0577
0 0.0566
Coarse Particulates (PM10)
State 24-Hour > 50 µg/m3 (days exceed threshold)
Federal 24-Hour > 150 µg/m3 (days exceed threshold)
Max. 24-Hour Conc. (µg/m3)
18 1
196.8
124
3 437.5
135
0 134.7
106
1 181.3
110
0 129.7
Fine Particulates (PM2.5)
Federal 24-Hour > 35 µg/m3 (days exceed threshold)
Max. 24-Hour Conc. (µg/m3)
44 150.7
40 72.3
34 58.1
9 63.7
15 71.9
Source: CARB 2026c.

Notes: ppm = parts per million; ppb = parts per billion; µg/m3 = micrograms per cubic meter; * = Data not available 1 Data obtained from the Bakersfield-5558 California Avenue Monitoring Station.

3.4 EXISTING SITE EMISSIONS
The project site is currently undeveloped and highly disturbed and does not generate criteria air pollutant or GHG emissions.

3.5 ELECTRIC AND NATURAL GAS UTILITIES
The project site is in the Pacific Gas and Electric Company (PG&E) service area for both electricity and natural gas. PG&E is a publicly traded utility company that generates, purchases, and transmits energy under contract with the California Public Utilities Commission. Its service territory is 70,000 square miles, extending north to south from Eureka to Bakersfield, and east to west from the Sierra Nevada range to the Pacific Ocean.

3.5.1 Electricity
The electricity distribution system of PG&E consists of 106,681 circuit miles of electric distribution lines and 18,466 circuit miles of interconnected transmission lines (PG&E 2022). PG&E electricity is generated by a combination of sources such as coal-fired power plants, nuclear power plants, and hydro-electric dams as well as newer sources of energy, such as wind turbines and photovoltaic plants or “solar farms.” “The grid,” or bulk electric grid, is a network of high-voltage transmission lines linked to power plants in the PG&E system. The distribution system consists of lower voltage secondary lines at the street and neighborhood level, with overhead or underground distribution lines, transformers, and individual service “drops” that connect to the individual customer.

I I I I

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting

Page 50 ends

Total electricity consumption in PG&E’s service area was 75,338 gigawatt-hours in 2024 (CEC 2026a). One gigawatt-hour is equivalent to one million kilowatt-hours (kWh). Sources of electricity sold by PG&E for its base plan in 2024, the latest year for which data are available, were (PG&E 2026b):
 23 percent renewable, consisting mostly of solar and wind  12 percent large hydroelectric
 2 percent natural gas
 63 percent nuclear

3.5.2 Natural Gas
PG&E gas transmission pipeline systems serve approximately 4.5 million gas customers in northern and central California (PG&E 2022). The system is operated under an inspection and monitoring program. The system operates in real time on a 24-hour basis and includes leak inspections, surveys, and patrols of the pipelines.

PG&E also adopted Pipeline 2020 program, which aims to modernize critical pipeline infrastructure, expand the use of automatic or remotely operated shut-off valves, catalyze development of next-generation inspection technologies, develop industry-leading best practices, and enhance public safety partnerships with local communities, public officials, and first responders. Total natural gas consumption in PG&E’s service area was 4,255 million therms for 2024 (CEC 2026b).

3.5.3 Transportation Fuels
California contains a network of crude oil pipelines that connects production areas to oil refineries in the Los Angeles area, the San Francisco Bay Area, and the Central Valley. California oil refineries also process Alaskan and foreign crude oil received in ports in Los Angeles, Long Beach, and the San Francisco Bay Area. Crude oil production in California and Alaska is in decline, and California refineries have become increasingly dependent on foreign imports (CEC 2026c). Foreign supplies, led by Iraq, Brazil, and Guyana in 2024, provide over half of the crude oil refined in California (CEC 2026d). According to the United States Energy Information Administration, California’s field production of crude oil has steadily declined since the mid-1980s, with a total production of approximately 110 million barrels in 2024 (EIA 2026). In Kern County, including all incorporated cities, approximately 406 million gallons of gasoline and 225 million gallons of diesel fuel were sold in 2024, the latest year of available data (CEC 2026e).

3.6 EXISTING SITE ENERGY DEMAND
The project site is currently undeveloped and highly disturbed and does not generate energy demands.

3.7 SENSITIVE RECEPTORS
Some land uses are considered more sensitive to air pollution than others due to the types of population groups or activities involved. Sensitive population groups include children, the elderly, the acutely ill, and the chronically ill, especially those with cardiorespiratory diseases.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting
May 2026 Page 51
Residential areas are also considered sensitive receptors to air pollution because residents (including children and the elderly) tend to be at home for extended periods of time, resulting in sustained exposure to any pollutants present. Other sensitive receptors include retirement facilities, hospitals, and schools. Recreational land uses are considered moderately sensitive to air pollution. Although exposure periods are generally short, exercise places a high demand on respiratory functions, which can be impaired by air pollution. In addition, noticeable air pollution can detract from the enjoyment of recreation. Industrial, commercial, retail, and office areas are considered the least sensitive to air pollution. Exposure periods are relatively short and intermittent because the majority of the workers tend to stay indoors most of the time. In addition, the working population is generally the healthiest segment of the public.

Nearby off-site sensitive receptors include the mobile-home park residences 750 feet to the west, single-family residences 800 feet to the southwest, and single-family residences 1,300 feet to the north of the project site.

Additionally, there are two buildings approximately 200 to 450 feet west of the project site across El Toro Viejo Road. However, it is uncertain whether these two buildings currently house residents or are used for nonresidential purposes only. For purposes of this analysis, they are assumed as residential homes. Additionally, for purposes of this analysis, workers are also included as sensitive receptors. The nearest worker receptors are the offsite workers at the surrounding businesses.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

3. Environmental Setting

Page 52 ends

This page intentionally left blank.

May 2026 Page 53

4. CEQA Thresholds

4.1 CEQA APPENDIX G THRESHOLDS

4.1.1 Air Quality
According to Appendix G of the CEQA Guidelines, the proposed project would have a significant effect on the environment with respect to air quality if it would:

AQ-1 Conflict with or obstruct implementation of the applicable air quality plan.

AQ-2 Result in a cumulatively considerable net increase of any criteria pollutant for which the project region is non-attainment under an applicable federal or state ambient air quality standard.

AQ-3 Expose sensitive receptors to substantial pollutant concentrations.

AQ-4 Result in other emissions (such as those leading to odors) adversely affecting a substantial number of people.

4.1.2 Greenhouse Gas Emissions
According to Appendix G of the CEQA Guidelines, the proposed project would have a significant effect on the environment with respect to GHG emissions if it would:

GHG-1 Generate GHG emissions, either directly or indirectly, that may have a significant impact on the environment.

GHG-2 Conflict with an applicable plan, policy, or regulation adopted for the purpose of reducing the emissions of GHGs.

4.1.3 Energy
According to Appendix G of the CEQA Guidelines, the proposed project would have a significant effect on the environment with respect to energy if it would:

E-1 Result in potentially significant environmental impact due to wasteful, inefficient, or unnecessary consumption of energy resources, during project construction or operation.

E-2 Conflict with or obstruct a state or local plan for renewable energy or energy efficiency.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds

Page 54 ends

4.2 SAN JOAQUIN VALLEY AIR POLLUTION CONTROL DISTRICT

SIGNIFICANCE CRITERIA

4.2.1 Air Quality
As stated in Appendix G of the CEQA Guidelines, the significance criteria established by the applicable air quality management district may be relied on to make the above determinations. Thus, this analysis also evaluates the Specific Plan’s air quality impacts pursuant to SJVAPCD’s recommended guidelines and thresholds of significance, as discussed further below.

SJVAPCD developed the Guide for Assessing and Mitigating Air Quality Impacts (GAMAQI) and adopted the latest version on March 19, 2015 (SJVAPCD 2015b). The current GAMAQI is the latest guidance for addressing air quality impacts in the SJVAB. Changes to the GAMAQI are primarily administrative in nature to update air basin information, attainment status, and general guidance to reflect updated conditions. The following thresholds of significance from the SJVAPCD’s GAMAQI are used to determine whether a proposed project would result in a significant air quality impact.

4.2.1.1 REGIONAL SIGNIFICANCE THRESHOLDS
SJVAPCD has identified regional construction and operational emissions thresholds to determine a project’s cumulative impact on air quality in the SJVAB. Specifically, these thresholds gauge whether a project would significantly contribute to a nonattainment designation based on the mass emissions generated. Mass emissions from a project are not correlated with concentrations of air pollutants. Table 9, SJVAPCD Regional Criteria Air Pollutants Significance Thresholds, lists SJVAPCD’s regional significance thresholds. It should be noted that SJVAPCD Rule 9510 and Regulation VIII may not reduce project-specific construction and operational emissions to below the SJVAPCD thresholds.

Table 9 SJVAPCD Regional Criteria Air Pollutants Significance Thresholds Air Pollutant Construction and Operation Phase
Reactive Organic Gases (ROG) 10 tons/year
Carbon Monoxide (CO) 100 tons/year
Nitrogen Oxides (NOX) 10 tons/year
Sulfur Oxides (SOX) 27 tons/year
Coarse Particulates (PM10) 15 tons/year
Fine Particulates (PM2.5) 15 tons/year
Source: SJVAPCD 2015b.

4.2.1.2 AMBIENT AIR QUALITY ANALYSIS
The need to perform air quality dispersion modeling for typical urban development projects is determined on a case-by-case basis, depending on project size. SJVAPCD applies the following guidance in determining whether an ambient air quality analysis should be conducted for development projects. Compliance with Rule 9510 frequently reduces project-specific emissions to less than significant levels. However, for large construction projects, additional mitigation may be required. SJVAPCD recommends that an ambient air quality

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds
May 2026 Page 55
analysis be performed for all pollutants when on-site emissions of any criteria pollutant from construction activities would equal or exceed any applicable threshold of significance for criteria pollutants, or 100 pounds per day of any criteria pollutant, after compliance with Rule 9510 requirements and implementation of all enforceable mitigation measures. Similarly, SJVAPCD also recommends that an ambient air quality analysis be performed for all criteria pollutants when emissions of any criteria pollutant resulting from project operational activities exceed the 100 pounds per day screening level, after compliance with Rule 9510 requirements and implementation of all enforceable mitigation measures. For projects that exceed the 100 pounds per day screening level, project-related concentrations are compared to the following NAAQS and CAAQS shown in Table 10, Ambient Air Quality Thresholds. Additionally, if either the NAAQS and/or CAAQS are exceeded, the SJVAPCD developed the significant impact levels (SILs) shown in Table 11, SJVAPCD Significant Impact Levels, to determine whether a project’s contribution would contribute significantly to an AAQS exceedance.

Table 10 Ambient Air Quality Thresholds
Pollutant
Averaging
Period
NAAQS
µg/m3
CAAQS
µg/m3
NO2 1-hour 188.7 339
Annual 100 57
CO 1-hour 40,000 23,000
8-hour 10,000 10,000
SO2
1-hour 196 655
3-hour 1,300 n/a
24-hour 365 105
Annual n/a n/a
PM10 24-hour 150 50
Annual n/a 20
PM2.5 24-hour 35 n/a
Annual 12 12
Notes: NAAQS = National Ambient Air Quality Standard; CAAQS = California Ambient Air Quality Standard; μg/m3 = micrograms per cubic meter

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds

Page 56 ends

Table 11 SJVAPCD Significant Impact Levels
Pollutant
Averaging
Period
Class II Significant Impact Levels
µg/m3
NO2 1-hour 7.5
Annual 1
CO 1-hour 2.000
8-hour 500
SO2
1-hour 7.8
3-hour 25
24-hour 5
Annual 1
PM101 24-hour 10.4
Annual 2.08
PM2.51 24-hour 2.5
Annual 0.63
Source: SJVAPCD 2024.

Notes: μg/m3 = micrograms per cubic meter
1 Because the proposed project is a land use development project and emissions would primarily be from non-point sources, the fugitive PM10 and PM2.5 SILs are utilized.

4.2.1.3 CONSISTENCY WITH THE APPLICABLE AIR QUALITY PLAN SJVAPCD has prepared plans to attain federal and State AAQS. The significance thresholds in Table 9 are based on SJVAPCD’s New Source Review offset requirements for stationary sources. Emission reductions achieved through implementation of SJVAPCD’s offset requirements are a major component of SJVAPCD’s air quality plans. Thus, projects with emissions below the thresholds of significance for criteria pollutants (see Table 9) would be determined to “not conflict or obstruct implementation of the [SJVAPCD’s] air quality plan” (SJVAPCD 2015b).

4.2.1.4 ODOR
Odor impacts associated with a proposed project would be considered significant if the project has the potential to frequently expose members of the public to objectionable odors. There are two general scenarios where a project could expose people to substantial odors:
 Odor Generator. Projects that would potentially generate odorous emissions proposed to locate near existing sensitive receptors or other land uses where people may congregate.  Odor Receiver. Residential or other sensitive receptor projects or other projects built for the intent of attracting people locating near existing odor sources.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds
May 2026 Page 57
Due to the subjective nature of odor impacts, the number of variables that can influence the potential for an odor impact, and the variety of odor sources, there are no quantitative or formulaic methodologies to determine if potential odors would have a significant impact. Rather, projects must be assessed on a case-by-case basis.

As shown in Table 12, SJVAPCD Screening Levels for Potential Odor Sources, the SJVAPCD has identified buffer distances for common types of facilities that have been known to produce odors in the SJVAB. The degree of odors could be significant and may be based on a review of SJVAPCD’s complaint records.

Table 12 SJVAPCD Screening Levels for Potential Odor Sources Land Use/Type of Operation Screening Distance
Wastewater Treatment Plant 2 miles
Sanitary Landfill 1 mile
Transfer Station 1 mile
Composting Facility 1 mile
Petroleum Refinery 2 miles
Asphalt Batch Plant 1 mile
Chemical Manufacturing 1 mile
Fiberglass Manufacturing 1 mile
Painting/Coating Operations 1 mile
Food Processing Facility 1 mile
Feed Lot/ Dairy 1 mile
Rendering Plant 1 mile
Source: SJVAPCD 2015b.

For a project locating near an existing source of odors, in California Building Industry Association v. Bay Area Air Quality Management District (CBIA), the California Supreme Court ruled that CEQA generally does not require an evaluation of impacts of the environment on a project unless a project will exacerbate an existing environmental hazard.

4.2.1.5 HEALTH RISK THRESHOLDS
Whenever a project would require use of chemical compounds that have been identified in SJVAPCD’s Rule 2201; placed on CARB’s air toxics list pursuant to AB 1807, Toxic Air Contaminant Identification and Control Act (1983); or placed on the EPA’s National Emissions Standards for Hazardous Air Pollutants, a health risk assessment is warranted. If a project would place sensitive land uses proximate to major sources of TACs (roadways with over 50,000 vehicles per day or major stationary sources), a health risk assessment may also be warranted. Table 13, SJVAPCD Toxic Air Contaminants Incremental Risk Thresholds, lists the SJVAPCD’s TAC incremental risk thresholds for operation of a project or placement of sensitive land uses proximate to major sources of air pollution. As stated under the CBIA ruling, though CEQA is generally not required to analyze impacts of the environment on a project, where a project will exacerbate an existing environmental hazard, CEQA requires an analysis of the worsened condition on future project residents and the public at large.

However, projects that do not generate emissions that exceed the values in Table 13 would not substantially contribute to cumulative air quality hazards or exacerbate an existing environmental hazard.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds

Page 58 ends

Table 13 SJVAPCD Toxic Air Contaminants Incremental Risk Thresholds Risk Type Threshold
Cancer Risk1 ≥ 20 in 1 million
Hazard Index2 ≥ 1.0
Source: SJVAPCD 2015b.
1 For the Maximum Exposed Individuals (MEI).
2 Ground-level concentrations of noncarcinogenic TACs for the MEI.

4.2.1.6 CUMULATIVE IMPACTS
By its very nature, air pollution is mostly a cumulative impact. The nonattainment status of regional pollutants is a result of past and present development. Future attainment of federal and State AAQS is a function of successful implementation of the SJVAPCD’s attainment plans. Consequently, SJVAPCD’s application of thresholds of significance for criteria pollutants is relevant to the determination of whether a project’s individual emissions would have a cumulatively significant impact on air quality. Pursuant to the SJVAPCD’s guidance, if project-specific emissions would be less than the thresholds of significance for criteria pollutants, the project would not be expected to result in a cumulatively considerable net increase of any criteria pollutant for which the SJVAPCD is in nonattainment under applicable federal or State AAQS.

4.2.2 Greenhouse Gas Emissions
The issue of global climate change is, by definition, a cumulative environmental impact. The SJVAPCD adopted Guidance Methodology for addressing GHG emissions under CEQA on December 17, 2009 (SJVAPCD 2009b). In addition, SJVAPCD adopted a Climate Change Action Plan to identify strategies to reduce GHG emissions in the SJVAPCD (SJVAPCD 2009c). SJVAPCD’s methodology includes a tiered approach:
 If a project is exempt from CEQA, individual-level and cumulative GHG emissions are treated as less than significant.
 If the project complies with a GHG emissions reduction plan or mitigation programs that avoid or substantially reduce GHG emissions in the geographic area where the project is located (i.e., city or county), individual-level and cumulative GHG emissions are treated as less than significant.  SJVAPCD does not have thresholds of significance for construction-related GHG emissions. Construction emissions are one-time, nonrecurring emissions. For buildings in general, it is reasonable to look at a 30- year time frame, since this is a typical interval before a new building requires its first major renovation (IEA 2008). Therefore, construction emissions are amortized over a 30-year duration and included in the operational emissions analysis.

SJVAPCD’s methodology for evaluating GHG emissions impacts also includes methodology to evaluate whether a project would comply with AB 32 by conducting an analysis of whether the project would reduce GHG emissions by 29 percent from business as usual through implementation of “best performance standards.” The November 30, 2015, Center for Biological Diversity v. California Department of Fish and Wildlife

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds
May 2026 Page 59
(Newhall Ranch) ruling effectively limits use of this performance metric. The 29 percent below business as usual established in the CARB Scoping Plan is derived from the statewide reduction target set by AB 32 for year 2020. The court held that the 29 percent is the statewide goal, but there is no substantial evidence that establishes a nexus between the statewide goal and the percentage reduction a specific land use project would need to achieve to be consistent with the goals of AB 32. Projects must determine the reduction target specific to the land use type being proposed.

Because SJVAPCD’s significance criteria do not establish a nexus that connects the statewide GHG emissions reductions identified in the Scoping Plan to reductions needed for new development projects, an alternate approach to use of the performance metric is utilized until SJVAPCD revises their Guidance Methodology to address the Newhall Ranch ruling. For purposes of this analysis, the proposed project is evaluated to a net zero threshold to determine potential GHG emissions impacts. While this net zero threshold approach is conservative, it aligns with the State’s carbon neutrality goal under AB 1279.

4.2.2.1 MASS EMISSIONS AND HEALTH EFFECTS
On December 24, 2018, in Sierra Club et al. v. County of Fresno et al. (Friant Ranch), the California Supreme Court determined that the EIR for the proposed Friant Ranch project failed to adequately analyze the project’s air quality impacts on human health. The EIR prepared for the project, which involved a master planned retirement community in Fresno County, showed that project-related mass emissions would exceed the SJVAPCD’s regional significance thresholds. In its findings, the California Supreme Court affirmed the holding of the Court of Appeals that EIRs for projects must not only identify impacts to human health but provide an “analysis of the correlation between the project's emissions and human health impacts” related to each criteria air pollutant that exceeds the regional significance thresholds or explain why it could not make such a connection. In general, the ruling focuses on the correlation of emissions of toxic air contaminants and criteria air pollutants and their impact to human health.

In 2009, the EPA issued an endangerment finding for six GHGs (CO2, CH4, N2O, HFCs, PFCs, and SF6) in order to regulate GHG emissions from passenger vehicles. The endangerment finding is based on evidence that shows an increase in mortality and morbidity associated with increases in average temperatures, which increase the likelihood of heat waves and ozone levels. The effects of climate change are identified in Table 5.

While identified effects such as sea level rise and increases in extreme weather can indirectly impact human health, neither the EPA nor CARB has established ambient air quality standards for GHG emissions. The state’s GHG reduction strategy outlines a path to avoid the most catastrophic effects of climate change. Yet the state’s GHG reduction goals and strategies are based on the state’s path toward reducing statewide cumulative GHGs as outlined in AB 32, SB 32, AB 1279, and Executive Order S-03-05. Because no single project is large enough to result in a measurable increase in global concentration of GHG emissions, climate change impacts of a project are considered on a cumulative basis. Without federal ambient air quality standards for GHG emissions and given the cumulative nature of GHG emissions, it is not feasible at this time to connect the project’s specific GHG emission to the potential health impacts of climate change.

RIVERVIEW MARKET PROJECT AIR QUALITY , GREENHOUSE GAS EMISSIONS , AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

4. CEQA Thresholds

Page 60 ends

This page intentionally left blank.

May 2026 Page 61

5. Environmental Impacts

5.1 METHODOLOGY
This air quality, GHG, and energy evaluation was prepared in accordance with the requirements of CEQA to determine if significant air quality impacts are likely in conjunction with the type and scale of development associated with the proposed project. Air pollutant and GHG emissions are calculated using the California Emissions Estimator Model (CalEEMod), version 2022.1. CalEEMod compiles an emissions inventory of construction (fugitive dust, off-gas emissions, on-road emissions, and off-road emissions), area sources, indirect emissions from energy use, mobile sources, indirect emissions from waste disposal (annual only), and indirect emissions from water/wastewater (annual only).

The analysis of electricity and natural gas usage for the proposed project is based on CalEEMod version 2022.1, which quantifies energy use associated with the proposed land uses. In addition, fuel consumption data from EMFAC2021 version 1.0.2 and OFFROAD version 1.1.3. are used to quantify fuel usage related to construction equipment operation and construction- and operation-related vehicle trips (e.g., construction worker trips and patron vehicle trips).

The operational-phase, project-related emissions are based on development of the new proposed commercial and retail land uses. The modeling accounts for the average daily vehicle trips generated, energy usage, water demand, and wastewater and solid waste generation from operation of the proposed project. Construction emissions are based on information provided for the project. Where specific information was not available, CalEEMod default values were utilized. Life cycle emissions are not included in this analysis because not enough information is available. 8
 Transportation. The project-related weekday and weekend average daily trip generation data and vehicle miles traveled (VMT) data are provided by Integrated Engineering Group (IEG 2026). Project-related VMT including those associated with light-, medium-, and heavy-duty trucks, was calculated using the KernCOG regional travel demand model, which, in general, is calibrated to account for truck travel distinct from travel associated with passenger vehicles. Transportation criteria pollutant and GHG emissions are based on CalEEMod default vehicle emissions. The modeled fleet mix is based on vehicle fleet mix data provided by IEG and CalEEMod default fleet mix data. The primary source of mobile criteria air pollutants and GHG emissions is tailpipe exhaust emissions from the combustion of fuel (i.e., gasoline and diesel). In 8 Life cycle emissions include indirect emissions associated with materials manufacture. However, these indirect emissions involve numerous parties, each of which is responsible for GHG emissions of their particular activity. The California Resources Agency, in adopting the CEQA Guidelines Amendments on GHG emissions found that lifecycle analysis was not warranted for project-specific CEQA analysis in most situations, for a variety of reasons, including lack of control over some sources, and the possibility of double-counting emissions (see Final Statement of Reasons for Regulatory Action, December 2009). Because the amount of materials consumed during the operation or construction of the proposed project is not known, the origin of the raw materials purchased is not known, and manufacturing information for those raw materials is also not known, calculation of life cycle emissions would be speculative. A life-cycle analysis is not warranted (LCI 2008).

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 62 ends

addition, for criteria air pollutants, brake and tire wear along with fugitive dust created from vehicles traveling roadways also generate particulate matter.
 Energy Use. Electricity and natural gas demand for the proposed project is based on CalEEMod default energy rates. Per the project applicant, the proposed onsite PV systems would generate an anticipated 1,201,933 kilowatt hour (kWh) per year of renewable electricity. For purposes of this analysis, the CalEEMod default electricity demand for the regional shopping center land use is reduced by the anticipated 1,201,933 kWh per year of renewable electricity. Use of natural gas would generate both criteria pollutant and GHG emissions, and use of electricity would contribute to GHG emissions generation.  Water/Wastewater. Water demand data for the proposed project is based on and derived from the water supply and demand analysis prepared by PlaceWorks (2026). In total, the proposed project is estimated to use 148,925 gallons per day and 54,357,625 gallons per year. GHG emissions from this sector are attributed to the electricity used for treatment and distribution of water and wastewater.  Solid Waste. Solid waste generation for the proposed uses is based on CalEEMod defaults. GHG emissions are associated with the decomposition of solid waste.  Area Sources. Area source emissions from use of consumer cleaning products and VOC emissions from paints are based on CalEEMod default values and the square footage of the proposed buildings.  Refrigerants. GHG emissions from operation of building air conditioning and refrigeration equipment are based on CalEEMod default values based on land use type.  Construction. For purpose of this analysis and based on information provided by the project applicant, construction of the proposed project is modeled to commence in March of 2026 and be completed by July of 2027, a duration of approximately 16 months. Phase 1 construction is modeled to occur from March 2026 to end of December 2026, and Phase 2 construction is modeled to occur from January 2027 to July 2027. The proposed left turn lane and traffic signal would be installed June 2026 to August 2026 and July 2026 to September 2026, respectively. Appendix A to this technical study shows the assumed construction activities, phasing, and construction equipment based on information provided by the project applicant and CalEEMod defaults. Demolition debris generated from the left turn lane installation would result in the export of 575 tons of demolition debris. The project site would be a balanced site and site preparation and grading activities would not result in export or import of soil. Emissions of VOCs would primarily be from the application of paints, asphalt pavement, and operation of construction vehicles and off-road equipment. Emissions of NOX, CO, and SOX would primarily be generated from operation of off-road construction equipment as well as construction worker and vendor vehicles. Coarse and fine particulate matter (PM10 and PM2.5) exhaust emissions would also be generated from operation of off-road construction equipment and construction and vendor vehicle trips. Fugitive dust emissions of PM10 and PM2.5 would be generated from ground disturbance activities and asphalt demolition.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 63

5.2 ENVIRONMENTAL IMPACTS

5.2.1 Air Quality Impacts
This section discusses the potential project impacts related to air quality.

AIR-1 Would the proposed project conflict with or obstruct implementation of the applicable air quality plan?
Impact Analysis: The following describes potential air quality impacts and consistency of the proposed project with the air quality management plans (AQMPs) developed by the SJVAPCD (see section 2.1.2.2).

The SJVAPCD is responsible for reducing emissions from area, stationary, and mobile sources in the SJVAB to achieve the National and California AAQS. A consistency determination with the AQMPs plays an important role in local agency project review by linking local planning and individual projects to the AQMPs. It fulfills the CEQA goal of informing decision makers of the environmental efforts of the project under consideration early enough to ensure that air quality concerns are fully addressed. It also provides the local agency with ongoing information as to whether they are contributing to the clean air goals in the AQMPs.

Kern COG is one of SJVAPCD’s partners in the preparation of the AQMPs, providing the latest economic and demographic forecasts and developing transportation measures in Kern County. Regional population, housing, and employment projects developed by Kern COG are based, in part, on a city’s general plan land use designations. These projections form the foundation for the emissions inventory of the AQMPs and are incorporated into the regional transportation plan/sustainable communities strategy (RTP/SCS) prepared by Kern COG to determine priority transportation projects and vehicle miles traveled in the Kern COG region.

Because the AQMPs’ strategies are based on projections from local general plans, projects that are consistent with the local general plan are considered consistent with the air quality-related regional plan. Additionally, only large projects have the potential to substantially affect the demographic forecasts in the AQMPs.

The proposed land uses are not permitted under the existing P land use designation. A general plan amendment would be required to change the land use designation from P to LI to allow for all uses permitted under a commercial designation.

Also, under CEQA Guidelines Section 15206(b), a proposed project is considered of statewide, regional, or area-wide significance if the project is a commercial office building of 250,000 square feet or more or employs 1,000 or more employees and/or a shopping center of 500,000 square feet or more or employs 1,000 or more employees. The proposed project would develop a shopping center with up to 8,996 building square feet (BSF) of medical office space and 396,535 BSF of retail space and is projected to generate 969 jobs (IEG 2026). The amount of retail space proposed and the projected number of new jobs generated would be less than 500,000 square feet and 1,000 employees. Thus, the proposed project would not substantially affect demographic projections beyond what is accounted for in the AQMPs.

However, per SJVAPCD guidance, project consistency with the AQMPs is based on whether project emissions would exceed the SJVAPCD regional significance thresholds shown in Table 9. As discussed in Impact AIR-2,

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 64 ends

the proposed project would exceed the regional operation significance thresholds for VOC and NOX and would cumulatively contribute to the nonattainment designations in the SJVAB without mitigation. Therefore, overall, the proposed project would be considered inconsistent with the AQMPs.

AIR-2 Would the proposed project result in a cumulatively considerable net increase of any criteria pollutant for which the project region is in nonattainment under an applicable federal or state ambient air quality standard?
Regional Construction Emissions
Construction activities associated with the proposed project would temporarily increase PM10, PM2.5, VOC, NOX, SOX, and CO regional emissions in the SJVAB. The primary source of NOX, CO, and SOX emissions is the operation of construction equipment. The primary sources of particulate matter (PM10 and PM2.5) emissions are activities that disturb the soil, such as grading and excavation, asphalt demolition, and building construction. The primary source of VOC emissions is the application of architectural coating and off-gas emissions associated with asphalt paving.

Construction air pollutant emissions are based on the preliminary construction information provided by the project applicant and CalEEMod defaults. Construction would entail site preparation, grading, utility trenching, construction of the proposed buildings, architectural coating, and asphalt paving. The proposed project would also include installation of a left-turn lane on Rosedale Highway in addition to the installation of a traffic signal in the southeast corner of Coffee Road and Jet Way. An estimate of maximum daily construction emissions for the proposed project is provided in Table 14, Annual Regional Construction Emissions.

Table 14 Annual Regional Construction Emissions
Construction Year
Criteria Air Pollutants
(tons per year)
VOC1 NOX CO SOX PM10 PM2.5
Phase 1
Year 2026 1 1 1 <1 <1 <1
Maximum Annual Emissions 1 1 1 <1 <1 <1
SJVAPCD Threshold 10 10 100 27 15 15
Significant? No No No No No No
Phase 2
Year 2027 <1 <1 1 <1 <1 <1
Maximum Annual Emissions <1 <1 1 <1 <1 <1
SJVAPCD Threshold 10 10 100 27 15 15
Significant? No No No No No No
Left Turn Lane
Year 2026 <1 <1 <1 <1 <1 <1
Maximum Annual Emissions <1 <1 <1 <1 <1 <1
SJVAPCD Threshold 10 10 100 27 15 15
Significant? No No No No No No
Traffic Signal
Year 2026 <1 <1 <1 <1 <1 <1

I I I I I

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 65
Table 14 Annual Regional Construction Emissions
Construction Year
Criteria Air Pollutants
(tons per year)
VOC1 NOX CO SOX PM10 PM2.5
Maximum Annual Emissions <1 <1 <1 <1 <1 <1
SJVAPCD Threshold 10 10 100 27 15 15
Significant? No No No No No No
Overall Project Buildout2
Year 2026 1 1 2 <1 <1 <1
Year 2027 <1 <1 1 <1 <1 <1
Maximum Annual Emissions 1 1 2 <1 <1 <1
SJVAPCD Threshold 10 10 100 27 15 15
Significant? No No No No No No
Source: CalEEMod Version 2022.1.
1 The proposed project would include 601,224 square feet of surface parking lot asphalt paving and 462,790 square feet of non-parking lot asphalt paving for a total of 1,063,714 square feet of asphalt surfaces. However, the modeled VOC emissions results shown in this table are based on 1,485,982 square feet of asphalt surfaces and represents a conservative estimate. 2 Includes Phase 1 and 2 and the off-site improvements (i.e., left turn lane and traffic signal).

As shown in Table 14, construction activities associated with the proposed project would not result in short-term emissions that would exceed the SJVAPCD regional thresholds for any of the air quality pollutants. Thus, construction of the proposed project would not result in emissions that cumulatively contribute to the nonattainment designations of the SJVAB.

Ambient Air Quality
The SJVAPCD requires dispersion modeling for projects that result in average daily construction-related emissions that exceed the screening criteria of 100 pounds per day. As shown in Table 15, Average Daily Construction-Related Emissions, the project-related construction activities would not generate emissions that would exceed the 100 pounds per day screening criteria. Therefore, project-related construction activities would not cause or contribute to a violation of the ambient air quality standards.

Table 15 Average Daily Construction-Related Emissions
Construction Phase
Criteria Air Pollutants
(pounds/day)1
VOC NOX CO SO2 PM10 PM2.5
Phase 1 Construction Related Emissions2 11 8 14 <1 2 1
Phase 2 Construction Related Emissions3 5 6 12 <1 2 <1
Left Turn Lane Construction Related Emissions4 <1 3 4 <1 1 <1 Traffic Signal Construction Related Emissions5 <1 <1 1 <1 <1 <1 Overall Project Construction Related Emissions6 8 8 14 <1 2 1 SJVAPCD Ambient Air Quality Screening Threshold 100 100 100 100 100 100 Exceeds Thresholds? No No No No No No
Source: CalEEMod Version 2022.1.
1 Based on the preliminary information provided by the project applicant. Where specific information regarding project-related construction activities was not available, construction assumptions were based on CalEEMod defaults, which are based on construction surveys conducted by South Coast AQMD of construction equipment and phasing for comparable projects. 2 Average daily emissions are calculated by dividing the total annual emissions by the total number of workdays estimated at 206 days.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 66 ends

3 Average daily emissions are calculated by dividing the total annual emissions by the total number of workdays estimated at 145 days. 4 Average daily emissions are calculated by dividing the total annual emissions by the total number of workdays estimated at 31 days. 5 Average daily emissions are calculated by dividing the total annual emissions by the total number of workdays estimated at 40 days. 6 Average daily emissions are calculated by dividing the total annual emissions by the total number of workdays estimated at 351 days.

Operational
Regional Emissions
Operation of the proposed project would generate criteria air pollutant emissions from area sources (e.g., landscaping equipment, architectural coating) and energy (i.e., natural gas used for heating and cooking).

Table 16, Annual Regional Operation Emissions, shows the criteria pollutant emissions that would be generated by each development phase as well as full buildout of the proposed project. As shown in the table, operation of the proposed project at full buildout would result in exceedance of the SJVAPCD regional emissions threshold for VOC and NOX, primarily due to project-related mobile-sources. Both VOC and NOX are ozone precursors.

NOX is also a precursor to the formation of particulate matter (PM10 and PM2.5). Thus, emissions of VOC and NOX that exceed the respective SJVAPCD regional thresholds would cumulatively contribute to the O3, PM10, and PM2.5 nonattainment designations of the SJVAB. Therefore, without any reduction measures, operation of the proposed project would contribute to the nonattainment designation of the SJVAB.

Table 16 Annual Regional Operation Emissions
Source
Criteria Air Pollutants
(tons per year)
VOC NOx CO SO2 PM10 PM2.5
Phase 1 (2026 Opening Year)
Mobile1,2 12 9 64 <1 12 3
Area 2 <1 1 <1 <1 <1
Energy <1 <1 <1 <1 <1 <1
Total 13 9.7 65 <1 12 3
Phase 2 (2027 Opening Year)
Mobile1,3 1 1 8 <1 2 <1
Area <1 <1 <1 <1 <1 <1
Energy <1 <1 <1 <1 <1 <1
Total 2 1 8 <1 2 <1
Full Buildout (2027 Full Buildout Year)
Mobile1,3 13 10 68 <1 13 3
Area 2 <1 2 <1 <1 <1
Energy <1 <1 <1 <1 <1 <1
Total 15 10.3 70 <1 13 4
SJVAPCD Regional Threshold 10 10 100 27 15 15
Exceeds Threshold? Yes Yes No No No No
Source: CalEEMod Version 2022.1.
1 Based on trip generation data provided by Integrated Engineering Group (2026). 2 Based on calendar year 2026 emissions data.
3 Based on calendar year 2027 emissions data.

I I I I I

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 67
Ambient Air Quality Analysis
The SJVAPCD requires dispersion modeling for projects that result in average daily operation-related emissions that exceed the average daily emissions screening criteria of 100 pounds per day. As shown in Table 17, Average Daily Operation-Related Emissions, the project-related operation-phase activities under full buildout conditions would result in average daily emissions that would exceed the 100 pounds per day screening criteria for CO.

Table 17 Average Daily Operation-Related Emissions
Operation Phase
Criteria Air Pollutants
(pounds per day)1
VOC NOX CO SO2 PM10 PM2.5
Operation Related Emissions 80 56 385 1 73 19
SJVAPCD Ambient Air Quality Screening Threshold 100 100 100 100 100 100 Exceeds Thresholds? No No Yes No No No
Source: CalEEMod Version 2022.1.
1 The average daily emissions are calculated by dividing the annual emissions by 365 days, which is the assumed number of workdays the project would operate annually.

In accordance with SJVAPCD methodology, because the proposed project would result in exceeding the ambient air quality screening threshold for CO, dispersion modeling was conducted using AERMOD, version

13.0. The calculated concentration levels associated with project operation are shown in Table 18, Ambient Air Quality Analysis Summary. The modeling output and emissions calculations for the ambient air quality analysis is provided in Appendix D (3&4) of this report.

Table 18 Ambient Air Quality Analysis Summary
Pollutant
Averaging
Period
Background
µg/m3
Project Operation
µg/m3
Project +
Background
NAAQS
µg/m3
CAAQS
µg/m3
NO2
1-hour 96.3 0.69 97.0 188.7 339
Annual 62.8 0.13 63.0 100 57
CO
1-hour 1,664 55.6 1,719 40,000 23,000
8-hour 916 37.4 953 10,000 10,000
SO2
1-hour 77.3 0.10 77.4 196 655
3-hour 50.0 0.09 50.1 1,300 n/a
24-hour 11.3 0.05 11.3 365 105
Annual 7.07 0.04 7.11 n/a n/a
PM10
24-hour 93.0 3.74 96.7 150 50
Annual 49.6 1.69 51.3 n/a 20
PM2.5
24-hour 37.2 1.07 38.3 35 n/a
Annual 12.90 0.48 13.38 12 12
Notes: Bold = Value exceeds either the NAAQS and/or CAAQS; Ambient air quality analysis modeling output provided in Appendix D (3&4); NAAQS = National Ambient Air Quality Standard; CAAQS = California Ambient Air Quality Standard; μg/m3 = micrograms per cubic meter As shown in Table 18, project-related operation activities would not generate emissions that would result in concentrations exceeding the ambient air quality standards for NO2 (1-hour), SO2 and CO when added to background concentrations. However, background concentrations of NO2 (Annual), PM10, and PM2.5 already

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 68 ends

exceed the AAQS. For these pollutants, the SJVAPCD has developed significant impact levels to determine whether a project’s contribution will contribute significantly to an AAQS exceedance. Table 19, Comparison of Concentrations to Significant Impact Levels, compares the incremental increase in NO2, PM10, and PM2.5 concentrations resulting from project operations to the SJVAPCD significant impact levels. The project’s modeled NO2, PM10, and PM2.5 concentrations are below the SJVAPCD significance levels for 24-hour and annual average concentrations.

Table 19 Comparison of Concentrations to Significant Impact Levels Pollutant
Averaging
Period
Project Operation
µg/m3
SIL
µg/m3
NO2 Annual 0.13 1.0
PM10
24-hour 3.73 10.4
Annual 1.69 2.08
PM2.5
24-hour 1.07 2.5
Annual 0.48 0.63
Note: Ambient Air Quality Analysis modeling output provided in Appendix D (3&4). SIL = significant impact level; μg/m3 = micrograms per cubic meter
AIR-3 Would the proposed project expose sensitive receptors to substantial pollutant concentrations?
Construction and operation of the proposed project could generate new sources of criteria air pollutants and TACs. The following describes potential localized air quality impacts from implementation of the proposed project to the nearby off-site sensitive receptors.

Operational Phase Health Risks to Off-Site Receptors
The types of land uses that typically generate substantial quantities of TACs are industrial (permitted stationary sources) and warehousing (truck idling) land uses. These types of major air pollutant emissions sources are not proposed under the project. The proposed project would develop retail and commercial (e.g., medical office, self-storage, and health club) land uses. Operation of the proposed uses could include occasional use of landscaping equipment and natural gas consumption for heating. However, air pollutant emissions generated from these activities would be nominal.

The proposed project would include a gas station with up to 40 fuel dispensers. CARB recommends avoiding siting gas stations within 500 feet of sensitive land uses to avoid exposing sensitive receptors to substantial concentration of air pollutants (CARB 2005). The nearest potential sensitive land uses to the proposed gas station would be the two buildings across El Toro Viejo Road, approximately 650 feet to the west, which would be outside the 500-foot buffer. Furthermore, emissions of TACs from stationary sources that may be associated with the proposed uses (e.g., restaurant chain-driven char broiler), including the proposed gas station, would be subject to further study and health risk assessment prior to the issuance of any necessary air quality permits under SJVAPCD Regulation II. Regulation II would ensure that stationary source emissions (permitted sources) would be reduced or mitigated below SJVAPCD significance thresholds of 20 in one million cancer risk and one for acute risk at the maximally exposed individual.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 69
In addition to stationary sources, the proposed project could generate heavy-duty trucks associated with the delivery of goods and supplies to the proposed retail and commercial uses, which would result in heavy-duty truck travel along the local roadways. Per City of Bakersfield Municipal Code Section 10.44.060, Truck Routes Established—Signs—Parking Restrictions, Rosedale Highway and Coffee Road are designated truck routes.

Based on the project site location, it is anticipated that any project-related heavy-duty truck travel would primarily occur on these two roadways. Per CARB land use siting guidelines, it is recommended to avoid siting sensitive land uses within 500 feet of urban roadways and freeways with 100,000 vehicles per day, or rural roads with 50,000 vehicles per day to avoid exposing sensitive receptors to substantial concentration of air pollutants (CARB 2005). Overall, while the proposed project could generate heavy-duty truck travel along the local roadways, the proposed project would only incrementally increase average daily trips for all vehicle types (i.e., passenger vehicles, heavy-duty trucks, etc.) by up to 5,934 average daily trips along the local roadways (see Appendix A). Because the proposed project would not have any warehousing uses and would primarily consist of retail, restaurant, and commercial uses, it anticipated that project-related traffic volumes would primarily consist of passenger vehicles associated with patrons. Thus, the incremental increase in vehicle trips that could result from implementation of the proposed project would be below roadway volumes identified by the CARB land use siting screening criteria to avoid exposing sensitive receptors to substantial concentration of air pollutants from vehicles traveling along roadway. Therefore, operation of the proposed project would not expose nearby off-site sensitive receptors to substantial concentrations of TACs.

CO Hotspots
Areas of vehicle congestion have the potential to create pockets of CO called hotspots. These pockets have the potential to exceed the State 1-hour standard of 20 ppm or the 8-hour standard of 9.0 ppm. Because CO is produced in greatest quantities from vehicle combustion and does not readily disperse into the atmosphere, adherence to AAQS is typically demonstrated through an analysis of localized CO concentrations. Hotspots are typically produced at intersections, where traffic congestion is highest because vehicles queue for longer periods and are subject to reduced speeds. However, emissions from motor vehicles, the largest source of CO emissions, have been declining since 1985, despite increases in VMT, due to the introduction of new automotive emission controls and fleet turnover (SJVAPCD 2015b). Furthermore, under existing and future vehicle emission rates, a project would have to increase traffic volumes at a single intersection to more than 44,000 vehicles per hour—or 24,000 vehicles per hour where vertical and/or horizontal air does not mix—in order to generate a significant CO impact (BAAQMD 2023). 9 Buildout of the proposed project would generate up to 1,183 peak-hour trips (IEG 2026). Overall, implementation of the proposed project would result in overall peak hour turning volumes between 352 to 6,865 for the intersections considered in the traffic study and would not produce the volume of traffic required to generate a CO hotspot (IEG 2026).10 Therefore, implementation 9 The CO hotspot analysis refers to the modeling conducted by the Bay Area Air Quality Management District (BAAQMD) for its CEQA Guidelines, which considers the improvement in mobile-source CO emissions. The modeling conducted by BAAQMD demonstrates that the net increase in peak hour traffic volumes at an intersection in a single hour would need to be substantial.

This finding is consistent with the CO hotspot analysis South Coast Air Quality Management District prepared as part of its 2003 Air Quality Management Plan (South Coast AQMD 1992; South Coast AQMD 2003) to provide support in seeking CO attainment for the South Coast Air Basin (SoCAB). Based on the analysis prepared by South Coast AQMD, no CO hotspots were predicted for the SoCAB. The analysis included some of Los Angeles’ busiest intersections, with daily traffic volumes of 100,000 or more peak hour vehicle trips operating at LOS E and F. 10 See Figure 5-2a, Year 2028 With Project Phases I–II Peak Hour Volumes, of the Riverview Market Transportation Analysis (IEG 2026).

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 70 ends

of the proposed would not have the potential to substantially increase CO hotspots at intersections in the vicinity of the project site.

Construction Health Risks to Off-Site Receptors
Project-related construction activities would temporarily elevate concentrations of TACs and DPM in the vicinity of sensitive land uses. The primary sources of TACs and DPM would be exhaust generated from construction off-road equipment and construction vendor and haul-truck trips. The proposed project would be developed in two development phases over an approximately 16-month duration from March 2026 to July 2027. The estimated excess lifetime cancer risk and chronic noncancer hazard index at the nearest sensitive receptors are shown in Table 20, Construction Risk Summary.

Table 20 Construction Risk Summary
Receptor Cancer Risk (per million) Chronic Hazards
Maximum Exposed Individual Resident 1.5 0.003
Maximum Exposed Individual Worker 0.3 0.031
SVJAPCD Significance Thresholds 20 1.0
Exceeds Threshold? No No
Note: Cancer risk calculated using 2015 OEHHA HRA guidance (OEHHA 2015).

The results of the HRA are based on the maximum modeled receptor concentration over the construction exposure period, conservatively assuming a 24-hour per day outdoor exposure and averaged over a 70-year lifetime. The maximum exposed individual resident (MEIR) and worker (MEIW) are shown in Figure 3, Project Sources and Off-Site Receptor Locations.

As shown in Table 20, the maximum incremental cancer risk levels during the construction phase of the project at the MEIR and MEIW are 1.5 per million and 0.3 per million, respectively, which would not exceed the cancer risk significance threshold of 20 in one million. For noncarcinogenic effects, the hazard index identified for each toxicological endpoint totaled less than one for the MEIR and MEIW. Therefore, chronic noncarcinogenic hazards are within acceptable limits, and project-related construction activities would not expose nearby sensitive receptors to substantial pollutant concentrations.

AIR-4 Would the proposed project result in other emissions (such as those leading to odors) adversely affecting a substantial number of people?
The following discusses potential odor impacts associated with development and operation of the proposed project. Due to the subjective nature of odor impacts, the number of variables that can influence the potential for an odor impact, and the variety of odor sources, there are no quantitative or formulaic methodologies to determine if potential odors would have a significant impact. Rather, projects must be assessed on a case-by-case basis. In general, odors from the types of land uses that could generate objectionable odors (see Table 12, SJVAPCD Screening Levels for Potential Odor Sources) are regulated under Regulation IV, Prohibitions, Rule 4102, Nuisance, which states:

PlaceWorks
S
Y
ource: Nearmap, Inc., 2023.
0 Scale (Feet)
1,000
Figure 3 - Project Sources and Off-site Receptor Locations Pink Lady
Wy
Firant-Kern Canal

RIVERVIEW MARKET PROJECT AIR QUALITY, GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUD CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION Project Boundary
Truck Route
Receptors (Residential)
Maximum Exposed
Individual Resident (MEIR)
Receptors (Worker) Development Area
Maximum Exposed
Individual Worker (MEIW)
Coffee Frontage Rd
Rosedale Hwy
El Toro Viejo Rd
Ribston Ave
Wolf River Ave
Bolero A
Belmac Ave
Telestar Ave
Calloway Dr
Max Dr
Wheeler St
Greenacres Dr
Holland St
Seabeck Ave
Flushing Quail Rd
Jenna Kathryn Dr
Cape Flattery Dr
Granite Falls Dr
Henry Ln
Shofner Ave
Patton Wy
Jet Wy
Wedding Wy
Charity
Ave
Coffee Rd
Langley Rd
Delbert St
Mcintosh Wy
Crispin St
Art St
Elzworth St
Calloway Ct
Calloway Frontage Rd
New Left Lane Pocket
New Traffic Signal
Jet Wy
2 n ।

OO O O O OO
△ AAA "I
7 A A A A A AA A A
AA shi e eg f
FA

A A A A A
• ‘0 9
fR “ta - 40
p
06 AAA L
4 AAA I
t AAA
I 3 SPP AA
> 7
1 I a
y ' 4.2 V
A
A
at
•5 TSS d
eh "l dd no V K
cymode s m2 ®
V 2aaas
*
-mele
l j: t
I
I
|
mF (D El
s<r
A
I
I
/ /
' a
4 b
*
1 I
rr
l.

I
- ITO.
2»
B
1".

Dee
“Paa-slWE
A
A
AAAA
A AAAA
! I
; I
A AA A
. , -i —— A
"Mk, ‘
-----
J —— —=
T5
J
7 P
5 2—
—- 4.}
a
i
__________
eoltch
crU9
-
■■ AAAA AA
ralt e
0003200/00 °
AAAA

AAAA AA
e"oaLLuus
1 Tee: .1.

J
[ ]
0 o
8}
qq< 23 o o
O OO o o
<2 22 <| o OO o o IL LD 8 90 I» y5 OO o
— ?
OO ie: it
o ooooooo
o ooooooo
O
“
3 a < <1 e.
55 LAS Ir l 2a,ss i 22
f 3
; * If a
—
L 541" Igs lNa
2Th
—i
$ ats
OOOOOO
ooooooo
>
o
0Th
o OOo OO
3 0Trn
ose
- ■■
00000000D
OO ooooooo
ive

8. U el
ADt
JCo)

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 72 ends

This page intentionally left blank.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 73
A person shall not discharge from any source whatsoever such quantities of air contaminants or other material which cause injury, detriment, nuisance, or annoyance to any considerable number of persons or to the public, or which endanger the comfort, repose, health or safety of any such persons or the public, or which cause, or have a natural tendency to cause, injury or damage to business or property.

The type of facilities that are considered to have objectionable odors include wastewater treatment plants, compost facilities, landfills, solid waste transfer stations, fiberglass manufacturing facilities, paint/coating operations (e.g., auto body shops), dairy farms, petroleum refineries, asphalt batch plants, chemical manufacturing, and food manufacturing facilities. The uses proposed by the project do not fall within these land uses. During project-related construction activities, construction equipment exhaust and application of asphalt and architectural coatings would temporarily generate odors. However, any construction-related odor emissions would be temporary and intermittent. Additionally, noxious odors would be confined to the immediate vicinity of the construction equipment. By the time such emissions reached any sensitive receptor, they would be diluted to well below any level of air quality concern. Furthermore, short-term construction-related odors are expected to cease upon the drying or hardening of odor-producing materials. Thus, overall, construction and operation of the proposed project are not expected to generate odors that would adversely affect a substantial number of people.

5.2.2 Greenhouse Gas Emissions Impacts
This section discusses the potential project impacts related to GHG emissions.

GHG-1 Would the proposed project generate a net increase in GHG emissions, either directly or indirectly, that would have a significant impact on the environment? Global climate change is not confined to a particular project area and is generally accepted as the consequence of global industrialization over the last 200 years. A typical project, even a very large one, does not generate enough greenhouse gas emissions on its own to influence global climate change significantly; hence, the issue of global climate change is by definition a cumulative environmental impact.

Operation of the proposed project would generate GHG emissions from vehicle trips, water demand, wastewater and solid waste generation, area sources (e.g., consumer cleaning products), energy usage (i.e., natural gas and electricity), and refrigerants. The project operational emissions for each phase of development and full buildout are shown in Table 21, Project Operation GHG Emissions Inventory. As shown in the table, the primary source of project-related emissions would be from mobile-source emissions generated from project vehicle trips (e.g., employees and patrons). The next largest sources of emissions would be from energy usage, followed by the solid waste and water sectors. Overall, development of the proposed project would generate annual operational phase GHG emissions of 16,027 MTCO2e per year under full buildout year conditions and would not achieve net zero GHG emissions. Compliance with SJVAPCD’s Rule 9410 eTRIP program for individual businesses in which the program would apply could contribute to reducing project-related vehicle trips and mobile sources to the extent feasible. However, it is not anticipated that compliance with Rule 9410 would result in the reductions needed to achieve net zero for the proposed project. Overall, GHG emissions

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 74 ends

generated by the proposed project would be considered to cumulatively contribute to statewide GHG emissions.

Table 21 Project Operation GHG Emissions Inventory
Source
GHG Emissions
(MTCO2e Per Year) (Percent)
Phase 1 (2026 Opening Year)
Mobile1,2 13,481 94%
Area 5 <1%
Energy 644 4%
Water 75 1%
Solid Waste 194 1%
Refrigerants 19 <1%
Amortized Construction (30-years) 12 <1%
Total All Sectors 14,431 100%
Phase 2 (2027 Opening Year)
Mobile1,3 1,709 91%
Area 1 <1%
Energy 128 7%
Water 19 1%
Solid Waste 29 2%
Refrigerants <1 <1%
Amortized Construction (30-years) 6 <1%
Total All Sectors 1,892 100%
Full Buildout (2027 Opening Year)
Mobile1,3 14,894 93%
Area 6 <1%
Energy 773 5%
Water 94 1%
Solid Waste 223 1%
Refrigerants 19 <1%
Amortized Construction (30-years) 18 <1%
Total All Sectors 16,027 100%
Net Zero Threshold 0 MTCO2e N/A
Exceeds Threshold? Yes N/A
Source: CalEEMod, Version 2022.1.

Notes: Manual summation of values may not equal to the shown totals due to rounding. 1 Based on trip generation, VMT, and vehicle fleet mix data provided by Integrated Engineering Group (2026). 2 Based on calendar year 2026 emissions data.
3 Based on calendar year 2027 emissions data.

GHG-2 Would the proposed project conflict with an applicable plan, policy, or regulation adopted for the purpose of reducing the emissions of GHGs?
Applicable plans adopted for the purpose of reducing GHG emissions include CARB’s Scoping Plan and Kern COG’s RTP/SCS. A consistency analysis with these plans is presented below.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 75
CARB Scoping Plan
The CARB Scoping Plan is applicable to state agencies but is not directly applicable to cities/counties and individual projects (i.e., the Scoping Plan does not require the City to adopt policies, programs, or regulations to reduce GHG emissions). However, new regulations adopted by the state agencies outlined in the Scoping Plan result in GHG emissions reductions at the local level. As a result, local jurisdictions benefit from reductions in transportation emissions rates, increases in water efficiency in the building and landscape codes, and other statewide actions that affect a local jurisdiction’s emissions inventory from the top down. Statewide strategies to reduce GHG emissions include the LCFS and changes in the corporate average fuel economy standards (e.g., Pavley I and Pavley California Advanced Clean Cars program).

The proposed project would adhere to the programs and regulations identified by the Scoping Plan and implemented by state, regional, and local agencies to achieve the statewide GHG reduction goals of AB 32 and SB 32. For example, new buildings under the proposed project would be required to, at minimum, meet the current CALGreen and Building Energy Efficiency Standards. The proposed project would install on-site PV systems to generate renewable electricity (anticipated 1,201,933 kWh/yr), which would be in compliance with the PV requirements under Section 140.10 of the Building Energy Efficiency Standards. Additionally, the proposed project would include electric vehicle (EV) parking in compliance with the CALGreen EV parking requirements. Installation of the proposed PV systems and EV parking spaces would contribute to achieving the building decarbonization and transportation electrification strategies of the Scoping Plan. Overall, development of the proposed project would not obstruct implementation nor be inconsistent with the CARB Scoping Plan.

Kern COG’s Regional Transportation Plan/Sustainable Communities Strategy The Kern COG 2022 RTP/SCS transportation projects help more efficiently distribute population, housing, and employment growth, and forecast development is generally consistent with regional-level general plan data to promote active transportation and reduce GHG emissions. The projected regional development, when integrated with the proposed regional transportation network in the 2022 RTP/SCS, would reduce per-capita GHG emissions related to vehicular travel and achieve the GHG reduction per capita targets for the Kern COG region. The 2022 RTP/SCS does not require that local general plans, specific plans, or zoning be consistent with the SCS, but provides incentives for consistency to governments and developers.

The proposed project would result in the development of a shopping center that would provide retail and commercial uses within the interior area of the City of Bakersfield. A VMT analysis was prepared in accordance with Senate Bill 743 to evaluate potential VMT impacts of the project (GTS 2025). Per the analysis, the proposed project would result in an overall net increase in countywide roadway VMT under both existing and cumulative conditions. Additionally, the proposed medical office use would exceed the applicable VMT per employee threshold. Therefore, the proposed project would be inconsistent with the overall goal of the Kern COG 2022 RTP/SCS in reducing per capita GHG emissions related to passenger vehicle travel and would interfere with Kern COG’s ability to implement the 2022 RTP/SCS.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 76 ends

5.2.3 Energy Impacts
This section discusses the potential project impacts related to energy.

ENE-1 Would the project result in potentially significant environmental impact due to wasteful, inefficient, or unnecessary consumption of energy resources during project construction or operation. [Threshold E-1])?
Short-Term Construction Impacts
Construction of the proposed project would create temporary increased demands for electricity and vehicle fuels compared to existing conditions and would result in short-term, energy use from off-road mobile equipment and on-road vehicles.

Construction Equipment Electrical Energy
Construction of the proposed project would not require electricity to power most construction equipment.

Electricity use during construction of the proposed project would vary during different phases of construction.

The majority of construction equipment would be gasoline or diesel powered. Later construction phases (e.g., vertical building construction) could result in the use of electricity-powered equipment for interior construction and architectural coatings. However, while not quantified, it is anticipated that the majority of electric-powered construction equipment would be hand tools (e.g., power drills, table saws) and lighting, which would result in minimal electricity usage during construction activities. Additionally, it is anticipated that such equipment would be used on an as-needed basis. Therefore, project-related construction activities would not result in wasteful or unnecessary electricity demands.

Construction Equipment Natural Gas Energy
It is not anticipated that construction equipment used for the proposed project would be powered by natural gas, and no other natural gas demand is anticipated during construction. Therefore, project-related construction activities would not result in wasteful or unnecessary natural gas usage.

Off-Road and On-Road Transportation Energy
Transportation energy use during construction of the proposed project would come from delivery vehicles, haul trucks, and construction employee vehicles as well as off-road construction equipment. It is anticipated that the majority of off-road construction equipment, such as what is used during demolition and grading, would be gas or diesel powered. The use of energy resources by these vehicles would fluctuate according to the phase of construction. Fuel consumption during construction (years 2026 through 2027) was calculated based on fuel consumption data from the EMFAC2021 (v. 1.0.2) and OFFROAD (v. 1.1.3) databases. The results are shown in Table 22, Construction-Related Fuel Usage.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 77
Table 22 Construction-Related Fuel Usage
Project Component
Gas Diesel Electricity
VMT Gallons VMT Gallons VMT kWh
Construction Worker Commute
Phase 1 317,886 12,000 452 12 9,053 3,299
Phase 2 196,259 7,261 266 7 6,280 2,290
Left Turn Lane 317,886 12,000 452 12 9,053 3,299
Traffic Signal Installation 196,259 7,261 266 7 6,280 2,290 Subtotal 522,393 19,572 729 19 15,568 5,675
Construction Vendor Trips
Phase 1 3,516 733 50,463 6,922 0 0
Phase 2 1,067 220 15,980 2,160 0 0
Left Turn Lane 3,516 733 50,463 6,922 0 0
Traffic Signal Installation 1,067 220 15,980 2,160 0 0
Subtotal 4,676 972 67,769 9,264 0 0
Construction Truck Haul and Onsite Truck Trips
Phase 1 0 0 25 4 0 0
Phase 2 0 0 23 4 0 0
Left Turn Lane 0 0 25 4 0 0
Traffic Signal Installation 0 0 23 4 0 0
Subtotal 0 0 2,947 467 0 0
Construction Off-Road Equipment
Phase 1 N/A 744 N/A 10.265 N/A 0
Phase 2 N/A 272 N/A 8,350 N/A 0
Left Turn Lane N/A 14 N/A 625 N/A 0
Traffic Signal Installation N/A 0 N/A 167 N/A 0
Subtotal N/A 1,030 N/A 19,827 N/A 0
Total 527,069 21,574 71,446 29,578 15,568 5,675
Sources: EMFAC2021 v; 1.0.2; OFFROAD v. 1.1.3.

Notes: VMT=vehicle miles traveled; kWh=kilowatt hour
To limit wasteful and unnecessary energy consumption from transportation, the construction contractors would minimize nonessential idling of construction equipment during construction in accordance with 13 CCR Article 4.8, Chapter 9, Section 2449, which limits nonessential idling of diesel-powered off-road equipment to five minutes. In addition, the project site is served by numerous regional freeway systems (e.g., State Routes 99, 58, and 178) that provide the most direct routes from various areas of the region. Moreover, all construction equipment would cease operating upon completion of project construction. Thus, energy use during construction of the proposed project would not be considered inefficient, wasteful, or unnecessary.

Long-Term Impacts During Operation
Operation of the proposed project would create additional demands for electricity and natural gas compared to existing conditions and would result in increased transportation energy use. Operational energy use would include heating, cooling, and ventilation of buildings; water heating; operation of electrical systems, use of on-site equipment and appliances; and indoor, outdoor, perimeter, and parking lot lighting.

I I I

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 78 ends

Electrical Energy
Operation of the proposed project would consume electricity for various purposes, including but not limited to cooling and ventilation of buildings; operation of electrical systems; lighting; and use of on-site equipment and appliances. Electrical service to the proposed project would be provided by PG&E through connections to existing off-site electrical lines and new on-site infrastructure. As shown in Table 23, Project Grid Electricity Demand, the proposed project would have a total electricity demand of 5,968,579 kilowatt hours per year (kWh/yr).

Table 23 Project Electricity Demand
Land Use Electricity (kWh/year)1,2
Regional Shopping Center3 2,335,726
Medical Office 214,042
Convenience Mart/Gas Station 25,106
Fast Food Restaurant w/Drive Thru 753,849
Automated Carwash 48,643
Public Storage 429,593
Parking Lot 959,688
Renewable Electricity from Onsite PV Systems1 1,201,933 Proposed Project Total 5,968,579
Source: CalEEMod version 2022.1.
1 Based on information provided by the project applicant. 2 Accounts for total electricity use from proposed buildings and parking lots. See Appendix A. 3 The shown electricity demand represents the CalEEMod default electricity demand of 3,537,659 kWh per year minus the anticipated 1,201,933 kWh per year of renewable electricity that would be generated from the proposed onsite PV systems.

While the proposed project would result in electricity demand, it would be designed and built to meet the current Building Energy Efficiency Standards and CALGreen, which would contribute to increasing energy efficiency. In accordance with the 2025 Building Energy Efficiency Standards, the proposed project would install rooftop PV systems and battery storage systems. These systems would contribute an estimated 1,201,933 kWh/yr of onsite renewable electricity to offset a portion of the project electricity demand from the grid. The on-site PV systems and battery storage—in addition to compliance with the RPS requirements by PG&E to increase electricity from renewable sources in the coming years—would further increase renewable electricity use. Furthermore, compliance with CALGreen would contribute to reducing indoor water use, which would also contribute to minimizing electricity demand from the transport and distribution of water. Thus, electricity use from operation of the proposed project would not be considered inefficient, wasteful, or unnecessary.

Natural Gas Energy
The proposed project would generate demand for natural gas due to the heating and cooling for the building and for water. As shown in Table 24, Project Natural Gas Demand, the proposed land uses would generate a natural gas demand of 6,150,142 kilo British thermal units per year (kBTU/yr) under full buildout conditions.

Development pursuant to the proposed project would result in a net increase in natural gas demands. However,

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 79
the proposed project would be built to meet the current Building Energy Efficiency Standards and CALGreen, which would contribute to optimizing energy efficiency of the proposed buildings. For example, building insulation requirements would contribute to minimizing use of natural gas for heating. Thus, overall, the proposed project would not result in wasteful or unnecessary natural gas demands.

Table 24 Project Natural Gas Demand
Land Use Natural Gas (kBTU/year)1,2
Regional Shopping Center 3,280,464
Medical Office 364,604
Convenience Mart/Gas Station 14,278
Fast Food Restaurant w/Drive Thru 2,109,444
Automated Carwash 167,987
Public Storage 213,366
Parking Lot 0
Proposed Project Total 6,150,142
Source: CalEEMod version 2022.1.

Note: kBTU = kilo British thermal units
1 Based on information provided by the project applicant. 2 Accounts for total natural gas use from proposed buildings. See Appendix A.

Transportation Energy
The proposed project would consume long-term transportation-related energy during operations from the use of motor vehicles. Estimates of transportation energy use are based on the overall VMT and EMFAC2021 fuel consumption data. Project-related vehicle trips would primarily be generated from customers and employees.

Additional vehicle trips to the project site would include deliveries, waste pick up, and maintenance trips.

Table 25, Project Annual Operation-Related Fuel Usage, shows the annual energy usage from project-related vehicle trips at full buildout. While operation of the proposed project would result in energy usage, the project site is within a half mile of bus stops for three Golden Empire Ticket bus routes (Routes 61, 82, and 84) and would be accessible from the existing surrounding sidewalks and class II bike lanes along Rosedale Highway and Coffee Road (IEG 2026). The proposed project would also provide bicycle parking and lockers. These amenities could contribute to minimizing vehicle trips and VMT. In addition, fuel efficiency standards for automobiles are established nationwide under the CAFE standards, which are not directly applicable to residents or land use development projects, but to car manufacturers. Thus, future customers and employees of the proposed project and the general population in the region do not have direct control in determining the fuel efficiency of vehicles manufactured and that are made available. However, compliance with the CAFE standards by car manufacturers would ensure that vehicles produced in future years have greater fuel efficiency and would generally result in an overall benefit of reducing fuel usage by providing the population of the city and region more fuel-efficient vehicle options. Thus, the assumed and forecast general fuel efficiency based on EMFAC2021 data used to quantify project-related transportation energy usage in Table 25 also applies to the population at large, and vehicles driven by project customers and employees would not be any less efficient than the vehicles driven by

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 80 ends

the general population. Thus, it is expected that operation-related fuel usage associated with the proposed project would not be considered inefficient, wasteful, or unnecessary.

Table 25 Project Annual Operation-Related Fuel Usage
Source
Gasoline Diesel CNG Electricity
Annual VMT1
Annual
Gallons
Annual
VMT1
Annual
Gallons
Annual
VMT1
Annual
Gallons
Annual
VMT1
Annual
kWh
Project Vehicle Trips 32,807,847 1,328,437 2,787,487 251,080 10,571 313 1,856,622 646,405 Source: EMFAC2021 v. 1.0.2.
1 Based on VMT and trip generation data provided by Integrated Engineering Group (2026).

ENE-2 Would the project conflict with or obstruct a state or local plan for renewable energy or energy efficiency. [Threshold E-2])
The following evaluates consistency of the proposed project with California’s RPS program.

California Renewables Portfolio Standard
The statewide RPS goal is not directly applicable to individual development projects, but to utilities and energy providers such as PG&E, which would provide all of the electricity needs for the proposed project. Compliance of PG&E in meeting the RPS goals would ensure that the State meets its objective of transitioning to renewable energy. The proposed project would be subject to the 2025 Building Energy Efficiency Standards and, in compliance with those standards, would install battery storage and rooftop PV systems. These systems would support the RPS program and the statewide transition to renewable energy. Therefore, implementation of the proposed project would not conflict with or obstruct plans for renewable energy and energy efficiency.

5.3 RECOMMENDED REDUCTION MEASURES

5.3.1 Air Quality
Impact AIR-1 and Impact AIR-2
Operation
AQ-1 Prior to issuance of building permits, the project applicant shall enter into a Voluntary Emission Reduction Agreement (VERA) with the San Joaquin Valley Air Pollution Control District (SJVAPCD) to mitigate regional air quality impacts associated with emissions of VOC and NOX generated by operation of the proposed project. At minimum, the VERA shall be crafted and shown to mitigate project-related operation emissions to below the SJVAPCD regional significance thresholds for VOC and NOX. Prior to the issuance of building permits, the project applicant shall provide documentation to the City of Bakersfield Development Services Department (City), that verifies, to the City’s satisfaction, completion of the VERA.

AQ-2 The project proponent/developer shall use paints and coatings with a VOC content of 25 grams per liter or less for all initial and future exterior coating and recoating of structures

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 81
including parking lot striping. This reduced VOC content requirement shall be incorporated into all site plans and appropriate construction documents (e.g., construction management plan) and submitted to the City of Bakersfield Development Services Department.

5.3.2 Greenhouse Gas Emissions
Impact GHG-1
GHG-1 The project proponent/developer shall design and construct the proposed buildings to be all electric, with electricity to be the only permanent source of energy for all nonemergency building energy needs, including but not limited to water heating; mechanical equipment; and heating, ventilation, and air conditioning (HVAC) (i.e., space-heating and space cooling). All major appliances (e.g., dishwashers, refrigerators, and water heaters) provided/installed shall be electric-powered EnergyStar certified or an equivalent energy efficiency where applicable.

The only exception to this measure shall be limited to commercial cooking uses. Prior to issuance of building permits for development projects, project proponent/developer shall provide plans that show the aforementioned requirements to the City of Bakersfield Building Division. Prior to issuance of the certificate of occupancy, the City of Bakersfield Building Division shall verify installation of the electric-powered EnergyStar or equivalent appliances.

GHG-2 Prior to issuance of the certificate of occupancy, the property owner shall provide documentation to the City of Bakersfield Building Division demonstrating enrollment in a 100 percent carbon-free electricity energy plan, such as the Pacific Gas & Electric’s (PG&E) 100% Solar Choice plan, for proposed project building(s) if such plan is available. If a 100 percent carbon-free electricity plan is not available, the property owner shall enroll in an energy plan with the next highest carbon-free electricity until a 100 percent carbon-free electricity energy plan becomes available. Measures to achieve 100 percent carbon-free electricity use may include, but are not limited to, plans for 100 percent renewable electricity.

If such carbon-free electricity energy plans are waitlisted, the property owner may enroll in an available energy plan in the meantime, but shall sign up for the waiting list for and enroll in a carbon-free electricity energy plan when it becomes available.

GHG-3 All landscaping equipment (e.g., leaf blower) used for property management shall be electric-powered only. Prior to issuance of the first certificate of occupancy, the property owner shall provide documentation (e.g., purchase, rental, and/or services agreement) to the City of Bakersfield Building Division to verify that all landscaping equipment utilized will be electric-powered.

GHG-4 Any off-road equipment (e.g., forklifts) used in daily business operations shall be electric-powered. The project proponent/developer shall disclose this requirement to all tenants/business entities prior to the signing of any lease agreement. In addition, the limitation to use only electric-powered off-road equipment shall be included in all leasing agreements.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 82 ends

Prior to issuance of a Business License for a new tenant/business entity, the project proponent/developer and tenant/business entity shall provide a signed document (verification document) to the City of Bakersfield (City) noting that the property owner has disclosed to the tenant/business entity the requirement to use only electric-powered equipment for daily operations. This verification document shall be signed by authorized agents for the project proponent/developer and tenant/business entities. In addition, if applicable, the tenant/business entity shall provide documentation (e.g., purchase or rental agreement) to the City to verify, to the City’s satisfaction, that any off-road equipment utilized will be electric-powered.

GHG-5 The project proponent/developer shall coordinate with Golden Empire Transit and provide improvements (e.g., bus shelter) of up to two bus stops. Prior to issuance of the first certificate of occupancy, the project proponent/developer shall provide documentation to the City of Bakersfield Building Division to verify, to the City’s satisfaction, that coordinate with Golden Empire Transit has been initiated.

GHG-6 The project proponent/developer shall install an end-of-trip shower facility. This end-of-trip shower facility requirement shall be incorporated into all site plans and appropriate building plans and submitted to the City of Bakersfield Building Division. Prior to issuance of the certificate of occupancy, the City of Bakersfield Building Division shall verify the installation of end-of-trip shower facility.

GHG-7 The project proponent/developer shall design the parking areas to comply with the Tier 2 Nonresidential Voluntary Measures of the California Green Building Standards Code (CALGreen), Division A5.1, Planning and Design, Section A5.106.5.3.4. This requirement shall be identified on all prepared building and site plans. The project proponent/developer shall submit these building and site plans that note this requirement to the City of Bakersfield Building Division prior to the issuance of construction permits.

Impact GHG-2
Apply Reduction Measures GHG-5 and GHG-6.

Measure Considered and Rejected
A measure to require tenants/business operators to only use zero-emission medium-heavy duty and heavy-heavy duty vendor trucks was considered. However, this type of measure was rejected due to the retail commercial nature of the proposed project. It is anticipated that the tenants/business operators would not own their own truck fleets and thus, the types of goods delivery/vendor trucks received by the tenants/business operators would be dependent on third-party truck fleet operators. Therefore, the types of trucks delivering goods to the tenants/business operators would not be in their control.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 83

5.3.3 Energy
No reduction measures necessary.

5.4 RESULTS WITH REDUCTION MEASURES

5.4.1 Air Quality
Impact AIR-1 and Impact AIR-2
Implementation of Reduction Measure AQ-2 would provide onsite reductions in VOC emissions associated with coatings and paints used for the building exterior surfaces and parking lot striping. Furthermore, implementation of Reduction Measures GHG-1 through GHG-3 could also provide VOC reductions generated from building energy use, property management landscaping equipment, and project-related vehicle trips. Table 26, Annual Regional Operation Emissions With Reduction Measures AQ-2 and GHG-3, shows the project-related annual emissions at full buildout with incorporation of Reduction Measure AQ-2 (low VOC content paints) and Reduction Measure GHG-3 (electric-powered landscaping equipment) in addition to the net change compared to the project-related annual emissions at full buildout without the reduction measures.

Table 26 Annual Regional Operation Emissions With Reduction Measures AQ-2 and GHG-3 Source
Maximum Daily Emissions (tons per year)
VOC NOx CO SO2 PM10 PM2.5
Full Buildout (2027 Full Buildout Year) Without Mitigation Mobile1,2 13 10 68 <1 13 3
Area 1.98 0.01 1.59 9.47E-5 2.81E-3 2.13E-3
Energy <1 <1 <1 <1 <1 <1
Total 14.56 10.29 70.26 0.16 13.32 3.50
Full Buildout (2027 Full Buildout Year) With Mitigation Mobile1,2 13 10 68 <1 13 3
Area3 1.69 0 0 0 0 0
Energy <1 <1 <1 <1 <1 <1
Total 14.27 10.28 68.67 0.16 13.32 3.50
SJVAPCD Regional Threshold 10 10 100 27 15 15
Exceeds Threshold? Yes Yes No No No No
Net Change
Mobile 0 0 0 0 0 0
Area (0.29) (0.01) (1.59) (9.47E-5) (2.81E-3) (2.13E-3) Energy 0 0 0 0 0 0
Total (0.29) (0.01) (1.59) (9.47E-5) (2.81E-3) (2.13E-3) Source: CalEEMod Version 2022.1.

Notes: (“ “) = negative value
1 Based on trip generation data provided by Integrated Engineering Group (2026). 2 Based on calendar year 2027 emissions data.
3 Includes implementation of Reduction Measure AQ-2, which requires use of paints and coatings with a VOC content of 25 grams per liter or less, and Reduction Measure GHG-3, which requires all landscaping equipment to be electric-powered.

I I I I

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 84 ends

As shown in Table 26, the proposed project would still exceed the SJVAPCD significance thresholds for VOC and NOX with incorporation of Reduction Measures AQ-2 and GHG-3. However, the amount exceeded for these two criteria air pollutants would be addressed through implementation of Reduction Measure AQ-1, which would require a VERA for the proposed project. In general, a VERA provides pound-for-pound mitigation of air pollutant emissions through a process that funds and implements emission reduction projects through the SJVAPCD emission reduction incentive grant program. Thus, implementation of Reduction Measure AQ-1—in addition to compliance with the Indirect Source Review program under SJVAPCD Rule 9510—would, at minimum, offset the amount of project-related regional emissions of VOC and NOX that exceed their SJVAPCD regional significance thresholds. Implementation of Reduction Measure AQ-1 would also ensure consistency of the proposed project with the applicable SJVAPCD air quality plans and ensure that operation of the proposed project would not cumulatively contribute to the nonattainment designations of the SJVAB.

5.4.2 Greenhouse Gas
Impact GHG-1
Table 27, Project Operation GHG Emissions Inventory With Reduction Measures GHG-1 and GHG-3, shows the project-related annual emissions at full buildout with incorporation of Reduction Measure GHG-1 (all-electric building systems and appliances) and Reduction Measure GHG-3 (electric-powered landscaping equipment) in addition to the net change compared to the project-related annuals emissions at full buildout without the reduction measures. Implementation of Reduction Measures GHG-1 and GHG-3 would contribute to supporting and encouraging use of electricity instead of natural gas or other liquid fuels, which would minimize on-site generation of GHG emissions. As shown in Table 27, implementation of Reduction Measures GHG-1 and GHG-3 would reduce project-related GHG emissions by 102 MTCO2e/yr. However, these two reduction measures would not reduce project-related emissions to achieve net zero. Overall, the other reduction measures would help contribute to reducing operation-related project GHG emissions to the extent feasible. For example, Reduction Measure GHG-2 would contribute to increasing use of carbon-free renewable electricity and supplement the on-site renewable electricity generated by the proposed on-site PV systems. Additionally, Reduction Measures GHG-5 and GHG-6 would result in active and public transit facility improvements and encourage active transit and public transit use, which would contribute to reducing passenger VMT.

Furthermore, Reduction Measure GHG-7 would result in increased EV charging infrastructure improvements and support use and adoption of EVs. Overall, although implementation of reduction measures would reduce project-related GHG emissions to the extent feasible, operation of the proposed project is still anticipated to generate GHG emissions and would not achieve the net zero threshold. Thus, project-related GHG emissions would have a substantial cumulative contribution to GHG emissions impacts.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 85
Table 27 Project Operation GHG Emissions Inventory With Reduction Measures GHG-1 and GHG-3 Source
GHG Emissions
(MTCO2e Per Year) (Percent)
Full Buildout (2027 Opening Year) Without Mitigation
Mobile1,2 14,894 93%
Area 6 <1%
Energy 773 5%
Water 94 1%
Solid Waste 223 1%
Refrigerants 19 <1%
Amortized Construction (30-years) 18 <1%
Total All Sectors 16,027 100%
Full Buildout (2027 Opening Year) With Mitigation
Mobile1,2 14,894 93%
Area3 0 0%
Energy4 677 4%
Water 94 1%
Solid Waste 223 1%
Refrigerants 19 <1%
Amortized Construction (30-years) 18 <1%
Total All Sectors 15,926 100%
Net Zero Threshold 0 MTCO2e N/A
Exceeds Threshold? Yes N/A
Net Change
Mobile 0 N/A
Area (6) N/A
Energy (96) N/A
Water 0 N/A
Solid Waste 0 N/A
Refrigerants 0 N/A
Amortized Construction (30-years) 0 N/A
Total All Sectors (102) N/A
Source: CalEEMod, Version 2022.1.

Notes: Manual summation of values may not equal to the shown totals due to rounding. 1 Based on trip generation, VMT, and vehicle fleet mix data provided by Integrated Engineering Group (2026). 2 Based on calendar year 2027 emissions data.
3 Includes implementation of Reduction Measure GHG-3, which requires all landscaping equipment to be electric-powered. 4 Includes implementation of Reduction Measure GHG-1, which requires all-electric building systems and appliances for land uses except for restaurant land uses.

Impact GHG-2
Per the VMT analysis prepared, the proposed project has been designed to incorporate feasible VMT reducing strategies (GTS 2025). The proposed project would include end-of-trip bicycle facilities such as bicycle parking and lockers. In addition, it also includes bicycle facility improvements as it proposes a new bicycle lane along Rosedale Drive, which would extend an existing facility and improve overall bicycle network connectivity.

Furthermore, the proposed project includes pedestrian network improvements such as new sidewalks along its

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 86 ends

frontages, which would improve pedestrian connectivity and walkability (GTS 2025). Aside from these project-related design features, future commercial tenants of the proposed project would be subject to the SJVAPCD Rule 9410 eTRIP rule. These project improvements in addition to the SJVPACD eTRIP rule would contribute to reducing project-generated VMT to the extent feasible. Incorporation of Reduction Measures GHG-5 and GHG-6, which would result in improvements for up to two bus stops and installation of an onsite end-of-trip shower facility, would also contribute to reducing project-generated VMT to the extent feasible by supporting public transit and bicycle use. However, overall, the proposed project would continue to be inconsistent with the Kern COG 2022 RTP/SCS.

5.5 CUMULATIVE IMPACTS

5.5.1 Air Quality
In accordance with SJVAPCD’s methodology, any project that produces a significant project-level regional air quality impact in an area that is in nonattainment contributes to the cumulative impact. The greatest source of emissions in the SJVAB is mobile sources. Due to the extent of the area potentially impacted from cumulative emissions (i.e., the SJVAB), SJVAPCD considers a project cumulatively significant when project-related emissions exceed the SJVAPCD regional emissions thresholds shown in Table 9.

Construction
The SJVAB is designated nonattainment for O3 and PM2.5 under the California and National AAQS, and nonattainment for PM10 under the California AAQS. Construction of cumulative projects will further degrade the regional and local air quality. Air quality will be temporarily impacted during construction activities.

However, construction emissions associated with the proposed project would not exceed the SJVAPCD’s regional construction emissions thresholds. Therefore, the project’s contribution to cumulative air quality impacts would be less than cumulatively considerable.

Operation
For operational air quality emissions, any project that does not exceed or can be mitigated to less than the daily regional threshold values is not considered by the SJVAPCD to be a substantial source of air pollution and does not add significantly to a cumulative impact. Incorporation of Reduction Measure AQ-1, which would require the project applicant to enter into a VERA with the SJVAPCD, would, at minimum, offset the amount of project-operation-related regional emissions of VOC and NOX that exceed their SJVAPCD regional significance thresholds. Furthermore, with implementation of reduction measures, the proposed project would be consistent with regional plans to reduce air pollution. Therefore, the project’s operational phase air pollutant emissions would not be cumulatively considerable.

5.5.2 Greenhouse Gas Emissions
Project-related GHG emissions are not confined to a particular air basin, but are dispersed worldwide.

Therefore, impacts identified under Impact GHG-1 are not project-specific impacts to global warming, but the proposed project’s contribution to this cumulative impact. As stated, implementation of Reduction Measures

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts
May 2026 Page 87
GHG-1 through GHG-7 would contribute to minimizing project-related energy sector and mobile source GHG emissions to the extent feasible. However, the proposed project would still result in a net increase in GHG emissions. Thus, the proposed project’s GHG emissions and contribution to global climate change impacts are considered cumulatively considerable.

5.5.3 Energy
The area considered for cumulative impacts to electricity and natural gas supplies is the service area of PG&E.

Other projects in the PG&E service area would be required to comply with the Building Energy Efficiency Standards and CALGreen, which would contribute to minimizing wasteful energy consumption and promoting renewable energy sources. As discussed in impact discussion ENE-1, construction- and operation-related energy impacts caused by the proposed project would not be considered inefficient, wasteful, or unnecessary.

The proposed project would therefore not contribute to any cumulative energy impacts when considered together with cumulative development projects and would not be cumulatively considerable.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSION S, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

5. Environmental Impacts

Page 88 ends

This page intentionally left blank.

May 2026 Page 89

6. References
Bay Area Air Quality Management District (BAAQMD). 2023, April. 2022 California Environmental Quality Act Air Quality Guidelines. https://www.baaqmd.gov/plans-and-climate/california-environmental -quality-act-ceqa/updated-ceqa-guidelines.

California Air Resources Board (CARB). 1998, April 22. The Report on Diesel Exhaust. http://www.arb.ca.gov/toxics/dieseltac/de-fnds.htm.
———. 1999. Final Staff Report: Update to the Toxic Air Contaminant List. ———. 2004, July 22. 2004 Revision to the California State Implementation Plan for Carbon Monoxide.

Updated Maintenance Plan for Ten Federal Planning Areas. https://ww3.arb.ca.gov/planning/sip/co/final_2004_co_plan_update.pdf. ———. 2005, April. Air Quality and Land Use Handbook: A Community Health Perspective. https://www.aqmd.gov/docs/default-source/ceqa/handbook/california-air-resources-board-air-quality-and-land-use-handbook-a-community-health-perspective.pdf. ———. 2017a, January 18. California’s Advanced Clean Cars Midterm Review. https://ww2.arb.ca.gov/sites/default/files/2020-01/ACC%20MTR%20Summary_Ac.pdf. ———. 2017b, March. Short-Lived Climate Pollutant Reduction Strategy. https://www.arb.ca.gov/cc/shortlived/shortlived.htm.
———. 2018, February. Proposed Update to the SB 375 Greenhouse Gas Emission Reduction Targets. https://ww2.arb.ca.gov/sites/default/files/2020-06/SB375_Updated_Final _Target_Staff_Report_2018.pdf.
———. 2022, November 16. 2022 Scoping Plan for Achieving Carbon Neutrality. https://ww2.arb.ca.gov/sites/default/files/2022-12/2022-sp.pdf. ––––––. 2024a, July 16. Ambient Air Quality Standards. https://ww2.arb.ca.gov/sites/default/files/2024- 08/AAQS%20Table_ADA_FINAL_07222024.pdf.
———. 2025a, November 13 (accessed). SB 375 Regional Targets. https://ww2.arb.ca.gov/our-work/programs/sustainable-communities-program/sb-375-regional-targets. ———. 2025b, November 4. California Greenhouse Gas Emissions from 2000-2023: Trends of Emissions and Other Indicators Report. https://ww2.arb.ca.gov/sites/default/files/ 2025-11/nc-2000_2023_ghg_inventory_trends.pdf.
———. 2026a, February 10 (Accessed). Maps of State and Federal Area Designations. https://ww2.arb.ca.gov/resources/documents/maps-state-and-federal-area-designations. ———. 2026b, February 7 (accessed). Common Air Pollutants. https://ww2.arb.ca.gov/resources/common -air-pollutants.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

6. References

Page 90 ends

———. 2026c, February 10 (accessed). Air Pollution Data Monitoring Cards (2020, 2021, 2022, 2023, and 2024). http://www.arb.ca.gov/adam/topfour/topfour1.php.

California Climate Action Team (CAT). 2006, March. Climate Action Team Report to Governor Schwarzenegger and the Legislature.

California Climate Change Center (CCCC). 2012, July. Our Changing Climate 2012: Vulnerability and Adaptation to the Increasing Risks from Climate Change in California.

California Energy Commission (CEC). 2006. Our Changing Climate: Assessing the Risks to California. 2006 Biennial Report. CEC-500-2006-077. California Climate Change Center. ———. 2009, May. The Future Is Now: An Update on Climate Change Science, Impacts, and Response Options for California. CEC-500-2008-0077.
———. 2021, May 19. Amendments to the Building Energy Efficiency Standards (2022 Energy Code) Draft Environmental Report. CEC-400-2021-077-D.
———. 2026a, February 9 (accessed). Electricity Consumption. . https://www.energy.ca.gov/data-reports/energy-almanac/california-electricity-data/california-energy-consumption-dashboards-0. ———. 2026b, February 9 (accessed). Natural Gas Consumption. https://www.energy.ca.gov/data-reports/energy-almanac/california-electricity-data/california-energy-consumption-dashboards-1. ––––––. 2026c, February 11 (accessed). Annual Oil Supply Sources to California Refineries. https://www.energy.ca.gov/data-reports/energy-almanac/californias-petroleum-market/annual-oil-supply-sources-california. ––––––. 2025d, February 11 (accessed). Foreign Sources of Crude Oil Imports to California. Accessed https://www.energy.ca.gov/data-reports/energy-almanac/californias-petroleum-market/foreign-sources-crude-oil-imports. ––––––. 2026e, February 11 (accessed). 2024 California Annual Retail Fuel Outlet Report Results (CEC-A15). https://www.energy.ca.gov/data-reports/energy-almanac/transportation-energy/california-retail-fuel-outlet-annual-reporting.

California Natural Resources Agency (CNRA). 2014, July. Safeguarding California: Reducing Climate Risk: An Update to the 2009 California Climate Adaptation Strategy.

California Office of Emergency Services (CalOES). 2020, June. California Adaptation Planning Guide. https://www.caloes.ca.gov/HazardMitigationSite/Documents/CA-Adaptation-Planning-Guide-FINAL-June-2020-Accessible.pdf.

California Public Utilities Commission (CPUC). 2021, May. 2021 Padilla Report: Costs and Savings for the RPS Program (Public Utilities Code Section 913.3). https://www.cpuc.ca.gov/-/media/cpuc -website/industries-and-topics/documents/energy/rps/2021-padilla-report_final.pdf.

General Technologies and Solutions (GTS). 2025, December 22. Vehicle Miles Traveled (VMT) Analysis Riverview Market Commercial Development, City of Bakersfield, CA.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

6. References
May 2026 Page 91
Governor’s Office of Land Use and Climate Innovation (LCI). 2008, June. CEQA and Climate Change:

Addressing Climate Change through CEQA Review. Technical Advisory. https://opr.ca.gov/docs/june08-ceqa.pdf.

International Energy Agency (IEA), 2008, March. Energy Efficiency Requirements in Building Codes, Energy Efficiency Policies for New Buildings.

Integrated Engineering Group (IEG). 2026, January. Riverview Market Transportation Analysis.

Intergovernmental Panel on Climate Change (IPCC). 2001. Third Assessment Report: Climate Change 2001.

New York: Cambridge University Press.
———. 2007. Fourth Assessment Report: Climate Change 2007. New York: Cambridge University Press. ———. 2013. Fifth Assessment Report: Climate Change 2013. New York: Cambridge University Press. ––––––. 2023. Sixth Assessment Report: Climate Change 2022. New York: Cambridge University Press. https://www.ipcc.ch/assessment-report/ar6/.

Kern Council of Governments (Kern COG). 2022. 2022 Regional Transportation Plan/Sustainable Communities Strategy. https://www.kerncog.org/wp-content/uploads/2022/12/2022_RTP.pdf.

National Highway Traffic Safety Administration (NHTSA). 2022, April 1. USDOT Announces New Vehicle Fuel Economy Standards for Model year 2024-2026. https://www.nhtsa.gov/press-releases/usdot -announces-new-vehicle-fuel-economy-standards-model-year-2024-2026. ———. 2024, June 7. Corporate Average Fuel Economy, NHTSA Announces New Proposal for CAFE and HDPUV Standards. https://www.nhtsa.gov/laws-regulations/corporate-average-fuel-economy. ––––––. 2025a, June 11. Resetting the Corporate Average Fuel Economy Program [Docket No. NHTSA-2025-0055]. https://www.federalregister.gov/documents/2025/06/11/2025-10586/resetting-the-corporate-average-fuel-economy-program. ———. 2025b, December 3. President Trump & Transportation Secretary Sean P. Duffy Unveil New “Freedom Means Affordable Cars” Initiative to Reset Fuel Economy Standards https://www.transportation.gov/briefing-room/president-trump-transportation-secretary-sean-p-duffy-unveil-new-freedom-means.

Office of Environmental Health Hazard Assessment (OEHHA). 2015, February. Air Toxics Hot Spots Program Risk Assessment Guidelines: Guidance Manual for Preparation of Health Risk Assessments. http://oehha.ca.gov/air/hot_spots/2015/2015GuidanceManual.pdf. ———. 2018, May. Indicators of Climate Change in California. https://oehha.ca.gov/media/ downloads/climate-change/report/2018caindicatorsreportmay2018.pdf.

Pacific Gas and Electric Company (PG&E). 2026a, February 10 (accessed). Company profile. https://www.pge.com/en_US/about-pge/company-information/profile/profile.page. ———. 2026b, February 11 (accessed). 2024 Power Content Label: Pacific Gas and Electric Company. https://www.pge.com/assets/pge/docs/about/corporate-responsibility-and-sustainability/2024-pcl-pacific-gas-and-electric-company.pdf.

RIVERVIEW MARKET PROJECT AIR QUALITY AND GREENHOUSE GAS EMISSIONS, AND ENERGY TECHNICAL STUDY CITY OF BAKERSFIELD: DEVELOPMENT SERVICES – PLANNING DIVISION

6. References

Page 92 ends
← All documents from this meeting